Post on 07-Sep-2015
description
transcript
www.hyundai-ce.com 2003. 6 Rev 1.
Standard Equipment Optional Equipment
ISO standard cabAll-weather steel cab with all-around visibilitySafety glass windowsRise-up type windshield wiperSliding fold-in front windowSliding side windowLockable doorHot & cool boxAccessory box & Ash-tray
Computer Aided Power Optimization(New CAPO) system2-power mode, 3-work mode, 2-user modeAuto deceleration & one touch deceleration systemAuto warm up systemAuto overheat prevention system
Heater & Defroster (7,500kcal/hr, 30,000BTU/hr)Self diagnostic systemStarting Aid (air grid heater), cold weatherCentralized monitoringLCD display
Engine speedClock & Error code
GaugesFuel level gaugeEngine coolant temperature gaugeHyd. oil temperature gauge
WarningFuel levelCheck Engine & CPUEngine oil pressureEngine coolant temperatureHyd. oil temperature Low batteryAir cleaner clogging
IndicatorPower maxPreheat & Engine warming-upOne touch decel
Door and cab locks, one keyAm/Fm radio and USB playerRemote control switchTwo outside rearview mirrorsFully adjustable suspension seat with seat beltSlidable joystic, pilot-operatedConsole box tilting system(LH.)Three front working lightsElectric hornBatteries (2 x 12V x 100 AH)Battery master switchRemovable clean out screen for Hyd. oil coolerAutomatic swing brakeRemovable reservoir tankFuel pre-filterBoom holding systemArm holding systemCounterweight (4600 kg, 10140 lb)Mono boom (5.85 m, 19 2)Arm (3.05 m, 10 0)Track shoes (600 mm, 24)Track rail guardFuel warmer
Air-conditioner (5000 kcal/hr, 20000 BTU/hr)FATC(Full Automatic Temperature Control)Sun visor for cabin insideFuel filler pump (35/min, 9.5 USgpm)Beacon lampSafety lock valve for boom cylinderwith overload warning deviceSafety lock valve for arm cylinderSingle acting piping kit (breaker, etc)Double acting piping kit (cramshell, etc)Accumulator, work equipment lowering12 volt power outlet (24V DC to 12V DC converter)Electric transducerTravel alarmVarious optional Arms Super short arm (2.10m, 6 11) Short arm (2.50m, 8 2) Long arm (3.60m, 11 10)
Various optional Buckets (SAE heaped) Standard bucket (1.08 m3, 1.41 yd3) Narrow bucket (0.60 m3, 0.78 yd3) Narrow bucket (0.79 m3, 1.03 yd3) Narrow bucket (1.03 m3, 1.35 yd3) Light duty bucket (1.50 m3, 1.96 yd3) Heavy duty bucket (1.07 m3, 1.40 yd3) Heavy duty bucket (1.15 m3, 1.50 yd3) Heavy duty bucket (1.27 m3, 1.66 yd3) Heavy duty bucket (1.46 m3, 1.91 yd3) Rock-Heavy duty bucket (1.16 m3, 1.52 yd3)
Cabin FOPS/FOG(ISO/DIS 10262)Cabin Roof-cover Transparent typeCabin lightsEngine emergency control cableTrack shoesTriple grousers shoe (700mm, 28 )Triple grousers shoe (800mm, 32 )Triple grousers shoe (900mm, 36 )
Lower frame under coverTool kitOperator suitSpecial cowlLow noise kitEngine emergency control cablePre-heating systemSeatAdjustable air suspension seatAdjustable air suspension seat with heaterMechanical suspension seat with heater
Pattern changer (2pattern)
PLEASE CONTACT
www.hyundai-ce.com 2009. 10 Rev 2
Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine shown may vary according to International standards.All US measurement rounded off to nearest pounds or inchs.
Robex 250LC-7A
CRAWLER EXCAVATOR Applied Tier 3 Engine
Some of the photos may include optional equipment.
250LC-7A
Built for Maximum Power, Performance, Reliability.A new chapter in construction equipment has now begun. Making the dream a reality.
Robex 250LC-7A
HYUNDAI CONSTRUCTION EQUIPMENT 02 / 03
Some of the photos may include optional equipment.
Technology in Cab Design
Operators Comfort is Foremost.Wide Cab Exceeds Industry Standards.
Visibility. Even more visibility than before, for safer, more efficient
operating.
Excellent Ventilation. Ventilation has been improved by the addition of the larger fresh
air intake system, and by providing additional air flow throughout the cab.
. Sliding front and side windows provide improved ventilation.
. A large sunroof offers upward visibility and additional ventilation.
Comfortable Operator Environment. The control levers and seat can be adjusted to provide maximum
operator comfort. . The seat is fully adjustable for optimum operating position,
reducing operator fatigue. . Console boxes slide forward and backward for improved
accessibility. . The proportional pressure controls reduce unnecessary exertion
while ensuring precise operation.. Large windows allow excellent visibility in all directions.
Low Noise Design. The Robex new 7A series was designed with low operation
noise in mind.. Hyundai engineering helps to keep interior and exterior
noise levels to a minimum. . The cab's noise levels have been additionally reduced by
improving the door seals for the cab and engine compartments. . An insulated diesel engine compartment with sound-damping
material also reduces noise.
12 3
Wide, Comfortable Operating SpaceSteel Cover SunroofDial Type Engine Speed Switch and / Key Switch
123
Radio/ USB Player & Remote Control Switch
HYUNDAI CONSTRUCTION EQUIPMENT 04 / 05
Robex 250LC-7A
Operating Environment
CAB
CAB
Highly Sensitive Joystickand Easy EntranceNew joystick grips for precisecontrol have been equipped with4 switches.
Easy-to-Reach ControlPanelsSwitches and other essentialcontrols are located near theoperator. This helps keep operator move-ment to a minimum, enhancingcontrol with less operatorfatigue.
Centralized control panelHorn buttonOption buttonRemote Radio controlTravel leverClusterOne touch decel buttonHour meterTravel pedalFully adjustable suspension seatSafety leverPower boost buttonJoystick control leverAir Conditioner and Heater controller
Rear Emergency ExitWindowRear Exit Window is designedwith easy exit for operator'ssafety.
Raise-up Wiper and CabinLightsRaise-up wiper has enhanced forthe better front view. Cabin Lightsenhances safety by brightlylighting the surroundings duringnight work(optional)Left
Right
Power boost/DummyOne touch decelerationHorn/Optional/Dummy
Smooth Travel Pedal and Foot Rests
Wide Cab with Excellent VisibilityThe cab is roomy and ergonomically designed with low noise leveland good visibility. A full view front window and large rear and sidewindows provide excellent visibility in all directions.
The best working conditions in a pleasant environment.
Minimization of Shock and Vibration through CabMounting SystemThe application of Viscous Mounting to the cabin support provides theoperator with a much improved ride. The operator work efficiency willincrease as the shock and noise level in the cabin decreases.
Improved Intelligent DisplayInstrument Panel is installed in front of RHconsole box. It is easy to check all critical systems witheasy-to-read indicators.
Storage Box and Cup HolderAn Additional storage box and cup holder are locatedbehind operators seat, and it keeps food andbeverages cool or hot.
Wide, Comfortable Operating SpaceAll the controls are designed and positionedaccording to the latest ergonomic research.Reinforced pillars have also been added forgreater cab rigidity.
HYUNDAI CONSTRUCTION EQUIPMENT 06 / 07
Maximum Protection
Robex 250LC-7A
The six cylinders, turbo-charged, 4 cycle, Chargerair cooled engine is builtfor power, reliability,economy and lowemissions.This engine meetsTier 3 emissionsregulations.
CUMMINS QSB6.7 Engine
The Definition of ProgressThe Quantum System B Series 6.7-liter enginecombines full-authority electronic controls withthe reliable performance.The electronics with the QSB6.7 have beenproven with our high-horsepower products-working in the harshest, most demandingenvironments-search as dusty, non-stop miningoperations while meeting emissions regulationsworldwide.The QSB6.7 features 24 valve designed withcentered injectors and symmetrical piston bowl. The combination of improved airflow and evenlydispersed fuel results in increased power,improved transient reponse and reduced fuelconsumption.
Track Rail Guide & AdjustersDurable track rail guides keep track links in place. Track adjustment is made easy with standard greasecylinder track adjusters and shock absorbing springs. (Full Track Guide : Option)
Strong and Stable Lower FrameReinforced box-section frame is all welded, low-stress, high-strength steel. It guarantees safety and resistance against external impact when driving on rough ground and workingon wet sites through high tensile strength steel panels, with highly durable upper and lower rollers andtrack guards. Long undercarriage incorporates heavy duty excavator style components.X-leg type center frame is integrally welded for maximum strength and durability.
Powerful and Preciser Swing ControlImproved shock absorbing characteristics makestopping a precise and smooth action
Reinforced Bucket and BucketLinkageSealed and adjustable bucket linkage providesless wear of pins and bushes as well as silentoperation.The design includes bucket linkdurability and anti wear characteristics.Additional reinforcement plates on cutting edgesection. Reinforced bucket is made with thickersteel and additional lateral plate.
Self Diagnosis SystemThe CPU controller diagnoses problems in theCAPO system caused by electric and hydraulicmalfunctions and displays them on the LCDmonitor of the cluster through error codes. Thiscontroller has the capacity to identify 48 distincttypes of errors. As the information from thisdevice, such as engine rpm, main pump deliverypressure, battery voltage, hyd. temperature, andthe state of all types of electric switches,provides the operator with a much more exactstate of machine operating condition. This makes the machine easier to troubleshootwhen anything does go wrong.
One Touch Decel SystemWhen the one touch decel switch is pressed, CPUcontroller controls the accel actuator to reduceengine speed to low idle. And then the one touchdecel switch is pressed again, the engine speedrecovers.
Pump Flow Control SystemIn neutral position: Pump flow is reduced to aminimum to eliminate power loss. In operation: Maximum pump flow is delivered tothe actuator to increase the speed. Withmovement of the control lever, pump flow isautomatically adjusted and the actuator speed canbe proportionally controlled.
Boom & Arm Holding System The Holding valves in the main control valveprevents the boom & arm from dropping over anextended period in neutral position.
Arm Flow Regeneration SystemArm flow regeneration valve provides smootharm-in operation without cavitation.
Hydraulic Damper in Travel PedalImproved travel controllability & feeling by shockreducing when starting and stopping.
Auto Deceleration SystemWhen remote-controlvalves are in neutralposition more than 4seconds, CPU con-troller instructs theaccel actuator toreduce engine speed
to auto decel rpm. This decreases fuelconsumption and reduces cab noise levels.
Max. Flow Cut-off SystemFor precise control and finishing work, the Max.Flow Cut-off System reduces pump flow, thusallowing smooth operation.
ADVANCED CAPO SYSTEM
Auto Decel / One Touch Decel RPM
Power Boost Control SystemWhen the power boost system isactivated, digging power increasesabout 10%. It is especially useful when extrapower is temporarily needed, forinstance, when digging hard earthand rock, or if the bucket teeth arestopped by a stubborn tree root.
Automatic Engine OverheatPreventionIf the engine coolant temperaturegets too high, the CPU controllerlowers the engine speed and coolsthe engine.
Automatic Warming-up SystemAfter the engine is started, if theengine coolant temperature is low,the CPU controller increases theengine speed and automaticallyincreases the pump flow rate towarm up the engine more effectively.
Anti Restart SystemThe new system protects the starterfrom re-starting during engineoperation, even if the operatoraccidentally turns the start key again.
Advanced Hydraulic System
Increased Higher PerformanceThe advanced CAPO(ComputerAided Power Optimization)system maintains engine andmutual pump power at optimumlevels. Mode selections aredesigned for various work loadsand maintaining highperformance while reducing fuelconsumption. Features such as autodeceleration and power boostare included in the system. Thesystem monitors engine speed,coolant temperature, andhydraulic oil temperature.Contained within the system areself diagnostic capabilitieswhich are displayed by errorcodes on the cluster.
POWER MODEH mode: High power S mode: Standard powerWORK MODE
Heavy duty work General work BreakerUSER MODEM mode: Maximum PowerU mode : Memorizing Operators Preferable Power Setting
1
2
3
12
3
HYUNDAI CONSTRUCTION EQUIPMENT 08 / 09
Reliability & Serviceability
Centralized Electric Control Box andEasy to Change Air Cleaner AssemblyElectric control box and Air cleaner are centralized in one or the samecompartment for easy service.
Highly Efficient Hydraulic Pump Large Tool Box for Extra Storage
Full Open Doors and Master Key SystemProvide Easy Access for Servicing.
Side Cover with Left & Right Swing Open TypeEasy access to vital components gives unrestricted view ofcomponent allows easy maintenance and repair.
Easy to Maintain Engine ComponentsThe cooling and preheating system are provided for optimum andimmediate operation, guaranteeing longer life for the engine andhydraulic components. Servicing of the engine and hydraulics is considerably simplifieddue to total accessibility.
Durability of structure proven throughFEM(Finite Element Method) analysisand long term durability test.
HYUNDAI CONSTRUCTION EQUIPMENT 10 / 11
Robex 250LC-7A
HYUNDAI CONSTRUCTION EQUIPMENT 12 / 13
BucketsEngine
Water cooled, 4 cycle Diesel,6-Cylinders in line, direct injection,Turbocharged, charge air cooled,Low emission
Type
Ratedflywheel
horse power
J1995 (gross) 176 HP (131 kW) at 1,900 rpm163 HP (121 kW) at 1,900 rpm178 PS (131 kW) at 1,900 rpm165 PS (121 kW) at 1,900 rpm
81.4 kgf.m(589 lbf.ft) at 1,400 rpm107 x 124 mm (4.2 x 4.9)
6,700 cc (409 cu in)
Max. torqueBore strokePiston displacementBatteriesStarting motorAlternator
2 x 12 V x 100 AH24 V, 4.5kW
24 V, 50 Amp
J1349 (net)6271/1 (gross)6271/1 (net)
SAE
DIN
Model
Main pump
Hydraulic motors
Relief valve setting
Hydraulic cylinders
TypeMax. flowSub-pump for pilot circuit
Two variable displacement piston pumps2222/min (59.2 US gpm / 49.3 UK gpm)Gear pump
Cummins QSB6.7
Swing system
Swing motorSwing reductionSwing bearing lubricationSwing brakeSwing speed
Axial piston motorPlanetary gear reductionGrease-bathedMulti wet disc12 rpm
Coolant & Lubricant capacity
Undercarriage
Operating weight (approximate)
(refilling)Fuel tankEngine coolant Engine oilSwing deviceFinal drive(each)Hydraulic system(including tank)Hydraulic tank
liter3403524
63.3
300190
US gal89.89.26.31.60.87
79.350.2
UK gal74.87.75.31.3
0.7366.041.8
Center frameTrack frameNo. of shoes on each sideNo. of carrier roller on each sideNo. of track roller on each sideNo. of rail guard on each side
X - leg typePentagonal box type51292
Drives & Brakes
Drive methodDrive motorReduction systemMax. drawbar pullMax. travel speed(high) / (low)GradeabilityParking brake
Pilot pressure operated joysticks and pedals with detachable leverprovide almost effortless and fatigueless operation.
X-leg type center frame is integrally welded with reinforced box-sectiontrack frames. The undercarriage includes lubricated rollers, idlers, trackadjusters with shock absorbing spring and sprockets, and track chainwith double or triple grouser shoes.
Operating weight
Major component weight
Operating weight, including 5680mm (18 8) boom, 2920m (9 7) arm,SAE heaped 0.92m3 (1.20 yd3) backhoe bucket, lubricant, coolant, full fueltank, hydraulic tank and the standard equipment.
Hydraulic system
Two speed axial piston motorwith brake valve and parking brake
Axial piston motor with automatic brake
330 kgf/cm2 (4,690 psi)330 kgf/cm2 (4,690 psi)360 kgf/cm2 (5,120 psi)275 kgf/cm2 (3,910 psi)35 kgf/cm2 (500 psi)Installed
Boom : 2-1401345 mm (5.5 52.9)Arm : 1-1501620 mm (5.9 63.8)Bucket : 1-1351185 mm (5.3 46.7)
Cross-sensing and fuel saving pump system
Travel
Swing
Implement circuitsTravelPower boost (boom, arm, bucket)Swing circuitPilot circuitService valve
No. of cylinder-borestroke
Fully hydrostatic typeAxial piston motor, in-shoe designPlanetary reduction gear21,600 kgf (47,600 lbf)5.3 km/hr (3.3 mph) / 3.3 km/hr (2.0 mph)35(70 %)Multi wet disc
Traveling and steeringEngine throttleLights
Pilot control Two joysticks with one safety lever(LH): Swing and arm, (RH): Boom and bucket(ISO)
Two levers with pedalsElectric, Dial typeTwo lights mounted on the boom and one in the battery box
Control
UpperstructureCounterweightBoom (with Arm cylinder)
5,520 kg (12,170 lb)4,600 kg (10,140 lb)2,280 kg (5,030 lb)
600 mm(24)
700 mm(28)
800 mm(32)
900 mm(35.4)
Shoes Operating weight Ground pressure
Triple grouser
Type Width mm(in) kg(lb) kgf/cm2(psi)
R250LC-7A
R250LC-7A H/C
R250LC-7A
R250LC-7A H/C
R250LC-7A
R250LC-7A H/C
25,200(55,600)
27,450(60,520)
25,500(56,200)
28,020(61,770)
25,800(56,900)
28,400(62,610)
0.51(7.25)
0.53(7.54)
0.44(6.26)
0.46(6.54)
0.39(5.55)
0.41(5.83)
0.35(4.98)R250LC-7A 26,100(57,500)
710 mm(28)
Double grouser R250LC-7A H/C 28,620(63,100) 0.46(6.54)
Standard equipment
STD/HC
STD/HC
Specifications Backhoe Attachment
Arms
Digging force
SAE heaped CECE heaped Without side cuttersWith
side cutters
Recommendation mm(ft.in)5850 (19 2)
2500(8 2)
2100(6 11)
3050(10 0)
3600(11 10)
Capacity m3 (yd3) Width mm (in)Weight kg(lb)
Boom
Arm
0.60 (0.78)0.79 (1.03)1.03 (1.35)
1.08 (1.41)1.50 (1.96)1.07 (1.40)1.15 (1.50)1.27 (1.66)1.46 (1.91)1.16 (1.52)
0.55(0.72)0.70 (0.92)0.90 (1.18)0.95 (1.24)1.30 (1.70)0.95 (1.24)1.00(1.31)1.10 (1.44)1.28 (1.67)1.00 (1.31)
760(29.9)890 (35.0)1090 (42.9)1130 (44.5)1490 (58.7)1150 (45.3)1210 (47.6)1310(51.6)1460 (57.5)1340 (52.8)
880(34.6)1010 (39.8)1210 (47.6)1250 (49.2)1610 (63.4)
-- - --
720 (1590)790 (1740)890 (1960)910 (2000)1080 (2380)1120 (2470)1160 (2560)1240 (2730)1320 (2910)1280 (2820)
M
M
M
: Applicable for materials with density of 2,000 kg / m3 (3,370 lb/ yd3) or less: Applicable for materials with density of 1,600 kg / m3 (2,700 lb/ yd3) or less: Applicable for materials with density of 1,100 kg / m3 (1,850 lb/ yd3) or less
: Standard backhoe bucket: Heavy-duty bucket : Rock-Heavy duty bucket
Boom and arms are of all-welded, low-stress, full-box section design. 5850 mm(19 2) mono boom and 2100 mm(6 11), 2500 mm(8 2),3050 mm(10 0), 3600 mm (11 10), arms are available. Buckets are all-welded, high-strength steel implements.
Bucket digging force
Arm crowdforce
Arm Length Weight
mm(ft.in)kg(lb)
2100 (6 11)1330 (2930)
Remark
156.9 [171.2]16000 [17450]35270 [38480]
178.5 [194.7]18200 [19850]40120 [43770]
135.3 [147.6]13800 [15050]30420 [33190]
140.2 [153.0]14300 [15600]31530 [34400]
2500 (8 2)1360 (3000)
156.9 [171.2]16000 [17450]35270 [38480]
178.5 [194.7]18200 [19850]40120 [43770]
130.4 [142.3]13300 [14510]29320 [31990]
134.4 [146.6]13700 [14950]30200 [32950]
3050 (10 0)1450 (3200)
156.9 [171.2]16000 [17450]35270 [38480]
178.5 [194.7]18200 [19850]40120 [43770]
114.7 [125.2]11700 [12760]25790 [28130]
118.7 [129.4]12100 [13200]26680 [29110]
3600 (11 10)1520 (3350)
156.9 [171.2]16000 [17450]35270 [38480]
178.5 [194.7]18200 [19850]40120 [43770]
116.7 [127.3]11900 [12980]26230 [28610]
120.6 [131.6]12300 [13420]27120 [29590]
[ ]:Power Boost
kNkgflbf
kNkgflbf
kNkgflbf
kNkgflbf
SAE
ISO
SAE
ISO
Note : Arm weight including bucket cylinder and linkage. Standard arm
2100mm (6 11 ) 3050mm (10 0 ) 3600mm (11 10 )2500mm (8 2 )
SAE heapedm3 (yd3)
1.27(1.66)1.46(1.91)
1.03 (1.35)0.60 (0.78)0.79 (1.03)
1.08 (1,41)1.50 (1,96)
1.07(1.40)1.15(1.50)
1.16 (1.52)
Dimensions &Working Ranges
Dimensions R250LC-7A
mm (ftin) mm (ftin)ABCDDEFGH
Boom length
Arm length
I Overall length
J Overall height of boom
K Track shoe width
L Overall width
5850 (19 2)2100
(6 11)
10050(33 0)
3530(11 7)
600(24)
3180(10 5)
700(28)
3280(10 9)
800(32)
3380(11 1)
900(36)
3480(11 5)
3050(10 0)
9920(32 7)
3220(10 7)
2500(8 2)
10000(32 10)
3590(11 9)
3600(11 10)
9910(32 6)
3590(11 9)
Tumbler distanceOverall length of crawlerGround clearance of counterweightTail swing radiusRear-end lengthOverall width of upperstructureOverall height of cabMin. ground clearanceTrack gauge
3830 (12 7)4640 (15 3)1115 (3 8)2965 (9 9)2870 (9 11)2840 (9 11)2990 (9 10)480 (1 7)2580 (8 6)
mm (ftin)Boom length
Arm length
A Max. digging reach
A Max. digging reachon ground
B Max. digging depth
B
C
D
E
F
Max. digging depth(8' level)
5850(19 2)2100
(6 11)
9550(31 4)
9360(30 9)
6050(19 10)
5840(19 2)
2500(8 2)
9870(32 5)
9680(31 9)
6450(21 2)
6260(20 6)
3050(10 0)
10360(34 0)
10190(33 5)
7000(23 0)
6830(22 5)
3600(11 10)
10870(35 8)
10700(35 1)
7550(24 9)
7400(24 3)
Max. vertical walldigging depth
5480(18 0)
5640(18 6)
6150(20 2)
6830(22 5)
Max. digging height9450
(31 0)9460
(31 0)9670
(31 9)9920
(32 7)
Max. dumping height 6360(20 10)
6420(21 1)
6630(21 9)
6860(22 6)
Min. swing radius 4420(14 6)
4200(13 9)
3980(13 1)
3900(12 10)
Working ranges R250LC-7A
Standard Equipment
Standard Equipment
E
KH
L
D, D'
A
B
I
J
C
F
G
Dimensions R250LC-7A High Chassis
mm (ftin) mm (ftin)
ABCDDEFGH
Boom length
Arm length
I Overall length
J Overall height of boom
K Track shoe width
L Overall width
5850 (19 2)2100
(6 11)
3610(11 10)
600(23.6)
3390(11 1)
700(27.6)
3490(11 5)
800(31.5)
3590(11 9)
900(35.4)
3690(12 1)
3050(10 6)
3240(10 8)
2500(8 2)
3750(12 4)
3600(11 10)
10060(33 0)
9760(32 0)
9970(32 9)
9930(32 7)
3620(11 11)
Tumbler distanceOverall length of crawlerGround clearance of counterweightTail swing radiusRear-end lengthOverall width of upperstructureOverall height of cabMin. ground clearanceTrack gauge
4030 (13 3)4940 (16 2)1470 (4 10)2965 (9 9)2870 (9 5)2840 (9 4)3345 (11 0)765 (2 6)2790 (9 2)
mm (ftin)Boom length
Arm length
A Max. digging reach
A Max. digging reachon ground
B Max. digging depth
B
C
D
E
F
Max. digging depth(8' level)
5850(19 2)2100
(6 11)
9550(31 4)
9280(30 5)
5680(18 8)
5470(17 11)
2500(8 2)
9870(32 5)
9160(31 6)
6080(19 11)
5890(19 4)
3050(10 6)
10360(34 0)
10110(33 2)
6630(21 9)
6460(21 2)
3600(11 10)
10870(35 8)
10360(34 11)
7180(23 7)
7030(23 1)
Max. vertical walldigging depth
5120(16 10)
5300(17 5)
5790(19 0)
6470(21 3)
Max. digging height9820
(32 3)9840
(32 3)10040
(32 11)10280
(33 9)
Max. dumping height 6730(22 1)
6790(22 3)
7000(23 0)
7220(23 8)
Min. swing radius 4140(13 7)
4030(13 3)
3940(12 11)
3900(12 10)
Working ranges R250LC-7A High Chassis
Standard Equipment
Standard Equipment
HYUNDAI CONSTRUCTION EQUIPMENT 14 / 15
HYUNDAI CONSTRUCTION EQUIPMENT 16 / 17
6.0 m(20.0 ft)4.5 m
(15.0 ft)3.0 m
(10.0 ft)1.5 m(5.0 ft)
GroundLine
-1.5 m(-5.0 ft)-3.0 m
(-10.0 ft)-4.5 m
(-15.0 ft)
*9080*20020*12220*26940*15960*35190
*9080*20020*12220*26940*15960*35190
*12710*28020*11110*24490*13310*29340*16960*37390*18260*40260
*12170*28020*11110*24490*13310*29340
14680323601505033180
*10140*22350*12150*2679012950285501288028400
*12250*27010
804017730
739016290
709015630
704015520
718015830
*6010*13250*7400
*163108070
177907830
172607750
170907850
17310
5490121005040
111104680
10320447098504400970044909900
*4210*9280*4620
*10190*5300
*116805790
127605570
122805430
119705390
11880
40408910389085803670809034307560323071203100683030706770
*2800*6170*3990*88004210928040909020
26505840255056202430536023205110
39608730353077803310730032607190338074503710818044209740
*5900*13010
2360520020404500187041201820401018904170210046302550562035807890
9.77(32.1)10.27(33.7)10.49(34.4)10.46(34.3)10.18(33.4)9.62
(31.6)8.71
(28.6)7.30
(24.0)
kglbkglbkglbkglbkglbkglbkglbkglb
Load pointheightm(ft)
Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) 9.0 m (30.0 ft) Capacity Reach
At max. reach
m (ft )
6.0 m(20.0 ft)4.5 m
(15.0 ft)3.0 m
(10.0 ft)1.5 m(5.0 ft)
GroundLine
-1.5 m(-5.0 ft)-3.0 m
(-10.0 ft)-4.5 m
(-15.0 ft)
*15590*34370*17410*38380*13610*30000
13120289201342029590
*13610*30000
*7950*17530*10440*23020*12520*27600
13050287701303028730
*12310*27140
*9640*21250
*7950*17530
7330161606670
147006410
141306390
140906540
144206930
15280
*5900*13010
*6630*14620
*7750*17090
8210181007970
175707900
174208020
17680
529011660
503011090
466010270
43309550412090804060895041609170
604013320
587012940
569012540
557012280
33107300317069903010664029006390
520011460450099204190924041509150439096805040
11110*6420
*14150
28706330241053102190483021504740228050302660586035607850
8.32(27.3)8.91
(29.2)9.17
(30.1)9.14
(30.0)8.80
(28.9)8.13
(26.7)6.98
(22.9)
kglbkglbkglbkglbkglbkglbkglbkglb
Load pointheightm(ft)
Load radius3.0 m (10.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach
At max. reach
m (ft )
6.0 m(20.0 ft)4.5 m
(15.0 ft)3.0 m
(10.0 ft)1.5 m(5.0 ft)
GroundLine
-1.5 m(-5.0 ft)-3.0 m
(-10.0 ft)-4.5 m
(-15.0 ft)
*16500*36380
*16500*36380
*15230*33580*18440*40650*15140*33380
129302851013210291201375030310
*9730*21450*12000*26460
13090288601299028640
*12700*28000*10620*23410
7530166006790
149706440
142006350
140006450
142206760
14900
*6190*13650
*7350*16200
8270182307990
176107880
173707940
17500
5130113104750
1047043809660414091304040891040909020
*5740*12650
5920130505720
126105570
122805520
12170
3380745032107080303066802900639028506280
488010760426093903970875039308660413091104670
103005910
13030
26805910227050002070456020204450212046702440538031706990
8.67(28.4)9.23
(30.3)9.48
(31.1)9.45
(31.0)9.13
(30.0)8.49
(27.9)7.41
(24.3)
kglbkglbkglbkglbkglbkglbkglbkglb
Load pointheightm(ft)
Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach
At max. reach
m (ft )
Rating over-side or 360 degreeRating over-front
Boom : 5.85m (19 2) Arm : 2.10 m (6 11) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24) triple grouser with 4,600kg (10,140lb) counterweight
Boom : 5.85m (19 2) Arm : 2.50 m (8 2) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24) triple grouser with 4,600kg (10,140 lb) counterweight
Boom : 5.85m (19 2) Arm : 3.60 m (11 10) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24) triple grouser with 4,600kg (10,140 lb) counterweight
1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping
load with the machine on firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.
6.0 m(20.0 ft)4.5 m
(15.0 ft)3.0 m
(10.0 ft)1.5 m(5.0 ft)
GroundLine
-1.5 m(-5.0 ft)-3.0 m
(-10.0 ft)-4.5 m
(-15.0 ft)
*15590*34370*17410*38380*13610*30000
15160334201547034110
*13610*30000
*7950*17530
*10440*23020*12520*2760013110289001309028860
*12310*27140*9640
*21250
*7950*17530
820018080
752016580
725015980
723015940
739016290
779017170
*5900*13010*6630
*14620*7750
*170908250
181908010
176607940
175008050
17750
584012870
557012280
519011440
485010690
464010230
458010100
468010320
606013360
590013010
572012610
560012350
36908140355078303380745032707210
522011510452099604210928041709190441097205060
11160*6420
*14150
32007050271059702480547024305360258056902990659039808770
8.32(27.3)8.91
(29.2)9.17
(30.1)9.14
(30.0)8.80
(28.9)8.13
(26.7)6.98
(22.9)
kglbkglbkglbkglbkglbkglbkglbkglb
Load pointheightm(ft)
Load radius3.0 m (10.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach
At max. reach
m (ft )
6.0 m(20.0 ft)4.5 m
(15.0 ft)3.0 m
(10.0 ft)1.5 m(5.0 ft)
GroundLine
-1.5 m(-5.0 ft)-3.0 m
(-10.0 ft)-4.5 m
(-15.0 ft)
*16500*36380
*16500*36380
*15230*33580*18440*40650*15140*33380
14960329801525033620
*15140*33380
*9730*21450*12000*2646013150289901305028770
*12700*28000*10620*23410
841018540
765016870
728016050
719015850
730016090
762016800
*6190*13650*7350
*162008310
183208030
177007910
174407970
17570
567012500
528011640
491010820
466010270
456010050
461010160
*5740*12650
595013120
575012680
560012350
555012240
3770831035907910341075203270721032207100
490010800
428094403990880039508710415091504690
103405940
13100
30006610255056202340516022905050241053102750606035507830
8.67(28.4)9.23
(30.3)9.48
(31.1)9.45
(31.0)9.13
(30.0)8.49
(27.9)7.41
(24.3)
kglbkglbkglbkglbkglbkglbkglbkglb
Load pointheightm(ft)
Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach
At max. reach
m (ft )
6.0 m(20.0 ft)4.5 m
(15.0 ft)3.0 m
(10.0 ft)1.5 m(5.0 ft)
GroundLine
-1.5 m(-5.0 ft)-3.0 m
(-10.0 ft)-4.5 m
(-15.0 ft)
*10020*22090*13650*30090*17980*39640
*10020*22090*13650*30090*17980*39640
*13880*30600*9530
*21010*10660*23500*13980*30820*18590*40980*16880*37210
*13880*30600*9530
*21010*10660*23500*13980*3082014860327601534033820
*8560*18870*11070*24410*12720*2804012930285101296028570
*11570*25510
*8560*18870
780017200
728016050
709015630
711015670
734016180
*5460*12040*6670
*14700*7970
*175708010
176607830
172607820
172408020
17680
*5460*12040
536011820
495010910
464010230
44809880447098504640
10230
*4100*9040*5160
*11380*5780
*127405750
126805560
122605460
12040
395087103830844036207980340075003230712031406920
4400970038808550363080003580789037308220415091505080
11200*6060
*13360
2660586022805030209046102040450021304700239052702980657044809880
9.22(30.2)9.74
(32.0)9.98
(32.7)9.95
(32.6)9.65
(31.7)9.05
(29.7)8.06
(26.4)6.48
(21.3)
kglbkglbkglbkglbkglbkglbkglbkglb
Load pointheightm(ft)
Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach
At max. reach
m (ft )
1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping
load with the machine on firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.
Lifting capacities - R250LC-7A Rating over-side or 360 degreeRating over-front
Boom : 5.85m (19 2) Arm : 2.50 m (8 2) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24) triple grouser with 4,600kg (10,140lb) counterweight
Boom : 5.85m (19 2) Arm : 3.05 m (10 0) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24) triple grouser with 4,600kg (10,140 lb) counterweight
Boom : 5.85m (19 2) Arm : 2.10 m (6 11) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24) triple grouser with 4,600kg (10,140 lb) counterweight
Lifting Capacities
HYUNDAI CONSTRUCTION EQUIPMENT 18 / 19
6.0 m(20.0 ft)4.5 m
(15.0 ft)3.0 m
(10.0 ft)1.5 m(5.0 ft)
GroundLine
-1.5 m(-5.0 ft)-3.0 m
(-10.0 ft)
*17660*38930*16740*36910
*17660*38930*16740*36910
*8510*18760*11020*24290*12840*28310*13480*29720*13180*29060*11890*26210
*8510*18760
988021780
928020460
908020020
910020060
931020530
*6020*13270*6870
*15150*8020
*17680*9060
*199709620
212109590
21140*8600
*18960
*6020*13270
6680147306290
138705970
131605790
127605760
127005920
13050
*6200*13670
*6710*14790
6840150806740
14860
45309990437096304210928041209080
*5390*11880
531011710
504011110
508011200
545012020
638014070*6310
*13910
3780833033107300311068603120688033607410395087105420
11950
8.49(27.9)9.00
(29.5)9.19
(30.2)9.09
(29.8)8.68
(28.5)7.91
(26.0)6.61
(21.7)
kglbkglbkglbkglbkglbkglbkglb
Load pointheightm(ft)
Load radius3.0 m (10.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach
At max. reach
m (ft )
Rating over-side or 360 degreeRating over-front
Boom : 5.85m (19 2) Arm : 2.10 m (6 11) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24) triple grouser with 4,600kg (10,140lb) counterweight
6.0 m(20.0 ft)4.5 m
(15.0 ft)3.0 m
(10.0 ft)1.5 m(5.0 ft)
GroundLine
-1.5 m(-5.0 ft)-3.0 m
(-10.0 ft)-4.5 m
(-15.0 ft)
*9080*20020*12220*26940*15960*35190
*9080*20020*12220*26940*15960*35190
*12710*28020*11110*24490*13310*29340*16960*37390*18260*40260
*12710*28020*11110*24490125602769012660279101301028680
*10140*22350*12150*26790
12890284201282028260
*12250*27010
7160157906540
144206250
137806190
136506330
13960
*6010*13250*7400
*163108030
177007790
171707710
170007820
17240
494010890
4510994041609170395087103880855039708750
*4210*9280*4620
*10190*5300
*116805760
127005540
122105400
119005370
11840
36608070351077403290725030606750286063102730602027005950
*2800*6170*3990*8800
4180922040708970
23505180225049602130470020304480
39408690351077403290725032407140336074103690814043909680
*5900*13010
2090461017903950163035901580348016403620183040302240494031907030
9.77(32.1)10.27(33.7)10.49(34.4)10.46(34.3)10.18(33.4)9.62
(31.6)8.71
(28.6)7.30
(24.0)
kglbkglbkglbkglbkglbkglbkglbkglb
Load pointheightm(ft)
Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) 9.0 m (30.0 ft) Capacity Reach
At max. reach
m (ft )
Boom : 5.85m (19 2) Arm : 3.60 m (11 10) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24) triple grouser with 4,600kg (10,140 lb) counterweight
6.0 m(20.0 ft)4.5 m
(15.0 ft)3.0 m
(10.0 ft)1.5 m(5.0 ft)
GroundLine
-1.5 m(-5.0 ft)-3.0 m
(-10.0 ft)-4.5 m
(-15.0 ft)
*6860*15120*9790
*21580*13030*28730*16990*37460
*6860*15120
*9790*21580*13030*28730*16990*37460
*12780*28180*11520*25400*11460*25260*14050*30970*18050*39790*17530*38650
*12780*28180*11520*25400*11460*25260*14050*30970*18050*39790*17530*38650
*8090*17840*10710*23610*12470*27490*13240*29190*13080*28840*11820*26060
*8090*17840
9730214509150
201708910
196408900
196209100
20060
*6340*13980
*7720*17020
*8820*19440
9440208109400
20720*8500
*18740
*6340*13890
6130135105800
127905610
123705580
123005720
12610
*4280*9440*4760
*10490*5480
*120806260
138006680
147306560
144606560
14460
*4280*94404720
104104480988042409350405089303940869039408690
*3150*6940*4200*9260*4810
*10600*4500*9920
*3150*6940
320070503070677029806570
*4210*9280
419092404000882040008820420092604670
103005650
12460*5890
*12990
287063302560564024105310239052702510553028106190345076105000
11020
9.92(32.5)10.34(33.9)10.50(34.4)10.42(34.2)10.07(33.0)9.44
(31.0)8.43
(27.7)6.86
(22.5)
kglbkglbkglbkglbkglbkglbkglbkglb
Load pointheightm(ft)
Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) 9.0 m (30.0 ft) Capacity Reach
At max. reach
m (ft )
Boom : 5.85m (19 2) Arm : 3.60 m (11 10) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24) triple grouser with 4,600kg (10,140 lb) counterweight
6.0 m(20.0 ft)4.5 m
(15.0 ft)3.0 m
(10.0 ft)1.5 m(5.0 ft)
GroundLine
-1.5 m(-5.0 ft)-3.0 m
(-10.0 ft)-4.5 m
(-15.0 ft)
*10020*22090*13650*30090*17980*39640
*10020*22090*13650*30090*17980*39640
*13880*30600*9530
*21010*10660*23500*13980*30820*18590*40980*16880*37210
*13880*30600*9530
*21010*10660*23500126202782012840283101329029300
*8560*18870*11070*24410*12720*2804012870283701290028440
*11570*25510
778017150
694015300
643014180
625013780
627013820
649014310
*5460*12040*6670
*14700*7970
*175707980
175907790
171707780
171507980
17590
523011530
483010650
4420974041209080396087303950871041209080
*4100*9040*5160
*11380*5780
*127405720
126105530
121905430
11970
357078703440758032407140303066802850628027606080
4380966038608510361079603560785037108180413091105060
11160*6060
*13360
2370522020204450184040601790395018604100210046302640582040108840
9.22(30.2)9.74
(32.0)9.98
(32.7)9.95
(32.6)9.65
(31.7)9.05
(29.7)8.06
(26.4)6.48
(21.3)
kglbkglbkglbkglbkglbkglbkglbkglb
Load pointheightm(ft)
Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach
At max. reach
m (ft )
Boom : 5.85m (19 2) Arm : 3.05 m (10 0) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24) triple grouser with 4,600kg (10,140lb) counterweight
1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping
load with the machine on firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.
6.0 m(20.0 ft)4.5 m
(15.0 ft)3.0 m
(10.0 ft)1.5 m(5.0 ft)
GroundLine
-1.5 m(-5.0 ft)-3.0 m
(-10.0 ft)-4.5 m
(-15.0 ft)
*7400*16310*10840*23900*14600*32190
*7400*16310*10840*23900*14600*32190
*15600*34390*9380
*20680*11330*24980*14940*32940*19040*41980*15960*35190
*15600*34390
*9380*20680*11330*24980*14940*32940*19040*41980*15960*35190
*9200*20280*11560*25490*12950*28550*13340*29410*12790*28200*10980*24210
*9200*20280
9510209709060
199708920
196709000
198409290
20480
*5720*12610
*6980*15390
*8240*18170
*9180*20240
946020860*9310
*20530
*5720*12610
645014220
605013340
576012700
564012430
566012480
*4570*10080*5290
*11660*5940
*13100*6640
*146406680
147306610
14570
*4570*10080
46501025044309770422093004060895039908800
*4600*10140
45901012043709630438096604620
101905220
115106120
*13490
31907030283062402660586026505840280061703180701040408910
9.37(30.7)9.82
(32.2)9.99
(32.8)9.90
(32.5)9.53
(31.3)8.85
(29.0)7.76
(25.5)
kglbkglbkglbkglbkglbkglbkglbkglb
Load pointheightm(ft)
Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach
At max. reach
m (ft )
Boom : 5.85m (19 2) Arm : 3.05 m (11 10) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24) triple grouser with 4,600kg (10,140 lb) counterweight
6.0 m(20.0 ft)4.5 m
(15.0 ft)3.0 m
(10.0 ft)1.5 m(5.0 ft)
GroundLine
-1.5 m(-5.0 ft)-3.0 m
(-10.0 ft)-4.5 m
(-15.0 ft)
*12220*26940*17990*39660
*12220*26940*17990*39660
*16770*36970*17840*39330*13960*30780
*16770*36970*17840*39330*13960*30780
*7770*17130*10330*22770*12400*27340*13360*29450*13340*29410*12370*27270
*9750*21500
*7770*17130
10080222209390
207009090
200409050
199509210
203009610
21190
*5540*12210
*6440*14200
*7650*16870
*8780*19360
*9520*20990
956021080*9020
*19890
*5540*12210
*6440*14200
6380140706020
132705800
127905730
126305830
12850
*5850*12900
*6430*14180
6860151206730
14840
460010140441097204230933041109060
*5050*11130
5030110904790
105604810
106005120
112905900
13010*6400
*14110
3560785031406920295065002940648031406920364080204810
10600
8.83(29.0)9.32
(30.6)9.50
(31.2)9.40
(30.8)9.01
(29.6)8.28
(27.2)7.07
(23.2)
kglbkglbkglbkglbkglbkglbkglbkglb
Load pointheightm(ft)
Load radius3.0 m (10.0 ft)1.5 m (5.0 ft) 4.5 m (15.0 ft) 6.0 m (20.0 ft) 7.5 m (25.0 ft) Capacity Reach
At max. reach
m (ft )
Boom : 5.85m (19 2) Arm : 2.50 m (8 2) Bucket : 1.08 m3 SAE heaped Shoe : 600mm(24) triple grouser with 4,600kg (10,140lb) counterweight
1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping
load with the machine on firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.
Lifting Capacities
Lifting capacities - R250LC-7A High Chassis
1.pdf2.pdf3.pdf4.pdf5.pdf6.pdf7.pdf8.pdf9.pdf10.pdf