Post on 11-May-2018
transcript
Pella® Windows and DoorsExterior Window and Door Trim
Pella gives you fewer details to worry about and more ways to delight your customers with a quality fit
and finish. We offer exterior trim options designed to complement wood, fiberglass, and vinyl windows
and doors from Pella — including factory-applied and factory-finished trim that can dramatically reduce
installation time. No matter the home’s construction type or architectural style, you can count on Pella
for more efficient ways to give your projects distinctive detailing and curb appeal.
E N D U R A C L A D® E X T E R I O R T R I M F R A M E E X PA N D E R
Factory-applied, low-maintenance aluminum trim.Durable, snap-in trim that is
adjustable to field conditions.
WOOD CLAD FIBERGLASS VINYL WOOD CLAD FIBERGLASS VINYL
• Prefinished; matches Pella products.
• Provides the look of flat trim.
• Aluminum brickmould can be attached to re-create the look of historical wood brickmould.
• No metal brake required.
• Cut-to-length kits, 96" or 144" lengths.
• Available in widths from 1" to 6".
• Receptors are available to provide a finished edge.
4-1/2" Flat Brickmould and 3-1/2" Flat Casing
Head
FPO
Sill
FPO
Monroe Trim and 1" Sill Nose
Brickmould Trim and 1/2" Sill Nose
Jefferson Trim and 2" Sill Nose
3-1/2" Flat Casing Trim and 3-1/2" Flat Casing Sill
3-1/2" Brickmould Trim and 1" Sill Nose
Head Sill
Head Sill
Head Sill
Head Sill
Head Sill
4-1/2" Flat Brickmould and 3-1/2" Flat Casing
Head Sill
47D36"
47E34"
47D62 1/2"
47D51 3/4"
47D41"
Frame Expander
Custom Brickmould with Clip
72AN - 72AQ2 1/16"
72AP - 72AQ1 7/8"
7SB1 - 0SBQ1 5/16"
7SBP - 0SBN1 7/8"
7SBX - 0SBN1 11/16"
7SB7 - 0SB81 1/2"
6"4"2-1/2"1-3/4"1"
• Prefinished with Pella’s tough EnduraClad finish; matches Pella® products.
• Brickmould or 3-1/2" brickmould, 3-1/2" flat, Jefferson or Monroe profiles.
• Several sill nose options.
• Custom profiles available.
• Designed for aluminum-clad wood windows and doors.
SILL PROFILES
SILL NOSE
TRIM PROFILES
50GCJefferson
50GJ3 1/2" Flat Casing
50GFMonroe
50G93 1/2" Brickmould
70F5Brickmould
50MD3 1/2" Flat Casing
50H1, 50H8w/ Nose Extension2" Nose
50H0, 50H8w/ Nose Extension1" Nose
50GZ1/2" Nose
1/2" Nose
SILL NOSE
TRIM PROFILES
50GCJefferson
50GJ3 1/2" Flat Casing
50GFMonroe
50G93 1/2" Brickmould
70F5Brickmould
50MD3 1/2" Flat Casing
50H1, 50H8w/ Nose Extension2" Nose
50H0, 50H8w/ Nose Extension1" Nose
50GZ1/2" Nose
1" Nose with Nose ExtensionSILL NOSE
TRIM PROFILES
50GCJefferson
50GJ3 1/2" Flat Casing
50GFMonroe
50G93 1/2" Brickmould
70F5Brickmould
50MD3 1/2" Flat Casing
50H1, 50H8w/ Nose Extension2" Nose
50H0, 50H8w/ Nose Extension1" Nose
50GZ1/2" Nose
2" Nose with Nose Extension
SILL NOSE
TRIM PROFILES
50GCJefferson
50GJ3 1/2" Flat Casing
50GFMonroe
50G93 1/2" Brickmould
70F5Brickmould
50MD3 1/2" Flat Casing
50H1, 50H8w/ Nose Extension2" Nose
50H0, 50H8w/ Nose Extension1" Nose
50GZ1/2" Nose
3-1/2" Flat Casing
TRIM PROFILES
SILL NOSE
TRIM PROFILES
50GCJefferson
50GJ3 1/2" Flat Casing
50GFMonroe
50G93 1/2" Brickmould
70F5Brickmould
50MD3 1/2" Flat Casing
50H1, 50H8w/ Nose Extension2" Nose
50H0, 50H8w/ Nose Extension1" Nose
50GZ1/2" Nose
Brickmould
SILL NOSE
TRIM PROFILES
50GCJefferson
50GJ3 1/2" Flat Casing
50GFMonroe
50G93 1/2" Brickmould
70F5Brickmould
50MD3 1/2" Flat Casing
50H1, 50H8w/ Nose Extension2" Nose
50H0, 50H8w/ Nose Extension1" Nose
50GZ1/2" Nose
3- 1/2" Brickmould
SILL NOSE
TRIM PROFILES
50GCJefferson
50GJ3 1/2" Flat Casing
50GFMonroe
50G93 1/2" Brickmould
70F5Brickmould
50MD3 1/2" Flat Casing
50H1, 50H8w/ Nose Extension2" Nose
50H0, 50H8w/ Nose Extension1" Nose
50GZ1/2" Nose
Jefferson
SILL NOSE
TRIM PROFILES
50GCJefferson
50GJ3 1/2" Flat Casing
50GFMonroe
50G93 1/2" Brickmould
70F5Brickmould
50MD3 1/2" Flat Casing
50H1, 50H8w/ Nose Extension2" Nose
50H0, 50H8w/ Nose Extension1" Nose
50GZ1/2" Nose
3-1/2" Flat Casing
SILL NOSE
TRIM PROFILES
50GCJefferson
50GJ3 1/2" Flat Casing
50GFMonroe
50G93 1/2" Brickmould
70F5Brickmould
50MD3 1/2" Flat Casing
50H1, 50H8w/ Nose Extension2" Nose
50H0, 50H8w/ Nose Extension1" Nose
50GZ1/2" Nose
Monroe
FRAME EXPANDERS
ALUMINUM BRICKMOULD WITH CLIP
47D36"
47E34"
47D62 1/2"
47D51 3/4"
47D41"
Frame Expander
Custom Brickmould with Clip
72AN - 72AQ2 1/16"
72AP - 72AQ1 7/8"
7SB1 - 0SBQ1 5/16"
7SBP - 0SBN1 7/8"
7SBX - 0SBN1 11/16"
7SB7 - 0SB81 1/2"
1-1/2"
47D36"
47E34"
47D62 1/2"
47D51 3/4"
47D41"
Frame Expander
Custom Brickmould with Clip
72AN - 72AQ2 1/16"
72AP - 72AQ1 7/8"
7SB1 - 0SBQ1 5/16"
7SBP - 0SBN1 7/8"
7SBX - 0SBN1 11/16"
7SB7 - 0SB81 1/2"
1-7/8"
47D36"
47E34"
47D62 1/2"
47D51 3/4"
47D41"
Frame Expander
Custom Brickmould with Clip
72AN - 72AQ2 1/16"
72AP - 72AQ1 7/8"
7SB1 - 0SBQ1 5/16"
7SBP - 0SBN1 7/8"
7SBX - 0SBN1 11/16"
7SB7 - 0SB81 1/2"
1-7/8"
47D36"
47E34"
47D62 1/2"
47D51 3/4"
47D41"
Frame Expander
Custom Brickmould with Clip
72AN - 72AQ2 1/16"
72AP - 72AQ1 7/8"
7SB1 - 0SBQ1 5/16"
7SBP - 0SBN1 7/8"
7SBX - 0SBN1 11/16"
7SB7 - 0SB81 1/2"
1-11/16"
47D36"
47E34"
47D62 1/2"
47D51 3/4"
47D41"
Frame Expander
Custom Brickmould with Clip
72AN - 72AQ2 1/16"
72AP - 72AQ1 7/8"
7SB1 - 0SBQ1 5/16"
7SBP - 0SBN1 7/8"
7SBX - 0SBN1 11/16"
7SB7 - 0SB81 1/2"
1-5/16"
47D36"
47E34"
47D62 1/2"
47D51 3/4"
47D41"
Frame Expander
Custom Brickmould with Clip
72AN - 72AQ2 1/16"
72AP - 72AQ1 7/8"
7SB1 - 0SBQ1 5/16"
7SBP - 0SBN1 7/8"
7SBX - 0SBN1 11/16"
7SB7 - 0SB81 1/2"
2-1/16"
Aluminum Frame Expander Options for Wood and Fiberglass Products
2-1/4"
Vinyl Frame Expander
N E W CO N ST R U CT I O N / F U L L- F R A M E R E P L AC E M E N T
Brickmould
4" Frame Expander
2-1/16" Brickmould
HEAD DETAILHEAD DETAIL
For detailed drawings, visit installation systems on pro.pella.com/install.
Exterior Window and Door Trim Options
A Z E K® T R I M S U R R O U N D S R O U G H / S M O O T H W O O D W O O D B R I C K M O U L D
Decay-resistant PVC trim, field-cut or factory-assembled surrounds.
Field-cut, protected, reversible wood trim. EnduraGuard® protected wood brickmould
available factory-applied or in lineal lengths.
WOOD CLAD FIBERGLASS VINYL WOOD FIBERGLASS VINYL WOOD CLAD FIBERGLASS VINYL
• Ready for site finishing.
• Cellular PVC material that’s impervious to insects and moisture.
• Preassembled surrounds or 9' lengths.
• 4" or 5" flat trim, or 2" brickmould with sill nose.
• Primed and ready for site finishing.
• Grained or smooth appearance.
• 10' lengths.
• 3-1/2" or 5" flat widths, 3/4" thickness.
• Available in primed Pine or unfinished Mahogany; ready for site finishing.
• Straight or curved.
• 1-7/8" or 3-1/2" brickmould or flat trim with 1-1/2" or 1-7/8" sill nose/subsill.
• Designed for wood exterior windows and doors only.
3-3/8" Flat Casing with Crown Molding 3-1/2" Flat Casing 1-7/8" Brickmould with Rabbet and Double-Hung Sill Nose
Head Sill Head Sill Head Sill
Sill Nose
Crown Molding
3-3/8" Flat Casing
2" Brickmould
4-3/8" Flat Casing
1-1/8" Subsill
1-7/8" Subsill
Double-Hung Sill Nose
3-1/2" Flat Casing3-1/2" Brickmould with Rabbet
2" Brickmould with Rabbet
3-1/2" Brickmould without Rabbet
2" Brickmould without Rabbet
SILL PROFILES
SILL PROFILES
TRIM PROFILES TRIM PROFILES TRIM PROFILES
3-1/2" Flat Casing 5-1/2" Flat Casing5 1/2"3 1/2"
2" Brickmould 2" Brickmouldwith Rabbet
3-1/2" Flat Casing
5 1/2"3 1/2"
HEAD DETAIL HEAD DETAIL HEAD DETAIL
For detailed drawings, visit installation systems on pro.pella.com/install.
N E W CO N ST R U CT I O N / F U L L- F R A M E R E P L AC E M E N T ( Co n t . )
Exterior Window and Door Trim Options
New Construction/Special Conditions
J - C H A N N E L T R A D I T I O N A L T R I M 5 / 8 " I N T E G R A L F L A N G E
Factory-applied, integral vinyl trim for use with vinyl siding. Durable, field-cut aluminum snap-in trim.Factory-applied, integral vinyl flange
for use in masonry walls.
WOOD CLAD FIBERGLASS VINYL WOOD CLAD FIBERGLASS VINYL WOOD CLAD FIBERGLASS VINYL
• Prefinished; matches window frame.
• Vinyl siding can be inserted into the channel.
• Designed for windows only.
• Prefinished; matches window frame.
• 96" or 144" lengths.
• 3" flat or 1-1/2" brickmould.
• Custom brickmould profiles available.
• Straight or curved.
• Prefinished; matches window frame.
• Use with wood bucks and precast concrete sill in masonry walls.
For detailed drawings, visit installation systems on pro.pella.com/install.
Brickmould Head and Jamb
3-1/2" Flat Trim Head
1/2" Sill Nose
3-1/2" Flat Trim Jamb
Pella® 350 Series with J-Channel Brickmould Trim with 1/2" Sill Nose Pella 250 Series with 5/8" Integral Flange
Brickmould Head and Jamb
Pella 250 Series J-Channel
• Designed for windows only.
Encompass by Pella®
with J-CHANNELNAIL FIN
Pella 350 Series
with J-CHANNELNAIL FIN
Pella 250 Series
5/8" INTEGRAL FLANGEBLOCK FRAME with
1/2" FLUSH FLANGE
5/8" INTEGRAL FLANGEBLOCK FRAME with
Encompass by Pella
Pella 350 Series
Pella 250 Series
Pella 250 Series Integral Flange
Head Sill Head Sill Head Sill
SILL PROFILES
TRIM PROFILES
N E W CO N ST R U CT I O N / S P E C I A L CO N D I T I O N S
HEAD DETAIL HEAD DETAIL HEAD DETAIL
Exterior Window and Door Trim Options
A L U M I N U M T R I M C O I L F L U S H F L A N G E *
Prefinished aluminum trim, adjustable to field conditions.Extends new frame to cover the existing
frame in stucco applications.
• Prefinished; matches window frame.
• Requires a metal brake.
• 25' and 50' rolls.
• 12" or 24" widths.
• Prefinished.
• Flange available in aluminum, fiberglass and vinyl.
• 144" lengths and 3/4", 1-1/2" or 3" widths available on wood clad windows.
• Available integral to the frame on some vinyl and fiberglass products.
WOOD CLAD FIBERGLASS VINYL WOOD CLAD FIBERGLASS VINYL
* Flush flange options vary by product type. For use in arid climates only.
Coil-Wrapped Brickmould and Sill Nose Flush Flange Shown on Wood Clad Window
SILL DETAIL
HEAD DETAIL
Vinyl
FLUSH FLANGEDOUBLE WALL
Flush Flange
Fiberglass
71G83" FLUSH FLANGE
71G7FLANGE
1 1/2" FLUSH71G9
3/4" FLUSH FLANGE
Wood Clad
Head Sill Head Sill
P O C K E T R E P L AC E M E N T
1-1/2" Flush Flange
HEAD DETAIL
For detailed drawings, visit installation systems on pro.pella.com/install.
© 2015 PELLA CORPORATIONPEXTRM0415
Exterior Window and Door Trim Options