Post on 27-Jun-2015
description
transcript
MV Wireless phaser TAG5000 S
MV Wireless phaser TAG5000 S
No hazard due to a defective cable link or resistors.
No hazard due to a cable link
Safety probes for indoor use
Positive indication for « in phase » conditions
Increase distance of operation (25m plus)
Possibility of phasing through walls (inside outside)
■ Functions of the MV wireless Phaser
MV Wireless phaser TAG5000 S
Wireless phase comparator for three phase network for nominal voltages from 4 kV up to 36 kV 50Hz or 60Hz.
Transmitter :Indicates the voltage presence with both visual and acoustic indications, then start to send the phase information to the receiver.
Receiver :Indicates the voltage presence, and indicates “in phase” relationship with both visual and acoustic indications.
■ Specifications of the MV Phase comparator
MV Wireless phaser TAG5000 S
Complying to European and CE marking
Transmitter : Grey housing 210mm Ø 90mm 0,5 kg
Receiver : Blue housing 210mm Ø 90mm 0,5 kg
HV VHV OHL Wireless phaser up to 500kV TAG5000
Insulating stick
Transmitter Receiver
■ FC4000 uses GPS to synchronize phasing data on long distance
HV Long Range OHL GPS Phaser up to 69kV FC4000
1 - Reference UnitWith GPS & Phone line
2 - Mobile Unit GPS antennaRF :100m range
3 – Mobile unit carrying case and RF relay
4 Smart Probe with display
5 - HVProbe with IR link
GPS Links
Work in total confidence
with your powernetwork
sales@alburaqtools.ae