Post on 15-May-2018
transcript
Fendt kW PS5185 E 129 175Fendt kW HP5185 E 129 175
2
You can always rely on your family. Just like on the next generation of the Fendt E-Series. These redesigned com-
bines are equipped with the tried and tested components found in the bigger ranges, and are therefore used to
working hard. Robust, reliable and efficient, they guarantee high seasonal performance when it is needed the most.
That makes it an assistant you won’t want to do without, especially on family-run farms.
My family – my fields – my Fendt.
3
THE ERGONOMIC OPERATOR ENVIRONMENT
My comfort zone for long days.
Spacious and clearly laid out – my E-SeriesYour work days begin and end, relaxed and satisfied,
in the comfortable cab on the Fendt E-Series. Large,
curved glazed areas and narrow pillars give you a full
view to the outside. Inside, the generous layout of the
cab gives you plenty of space to complete your working
steps comfortably.
Combine perfectly under controlAll operating elements are well-thought out and ergo-
nomically arranged, so that you can control the com-
bine easily and precisely. You can specify the speed and
operate the cutter unit and the unloading tube with the
multifunction lever. You have all the important operat-
ing elements at hand on the console on the right, for
example, for the threshing cylinder speed. The digi-
tal on-board computer shows the speed, tank fill level
and forward speed. The monitor adjusts the brightness,
thanks to day and night modes.
Your harvest, your relaxationA comfortable sitting position is crucial, especially on
long work days. The suspended driver seat absorbs
shock loads reliably. You can set your ideal working posi-
tion with the easily adjustable steering column.
Sensors for the best monitoringAdditional electronic sensors provide deeper insight
with detailed information about your harvesting results.
The loss sensor determines the walker and shaker shoe
losses, which are then shown in the display. The elec-
tric sieve adjustment enables convenient, in-cab adjust-
ment of the sieves.
4
Multifunction lever
Control the driving direction, table setting, reel setting, reel speed and pivot the
grain tank unloading tube with only one hand.
The practical control console
You can control the entire combine using the side console of the Fendt E-Series. The digital on-board computer displays
the running machine data. In addition to gear shifting, you can also operate the lights and speeds for the engine, thresh-
ing cylinder and blower here.
View of the cutter unit – everything in view
Everything in view: thanks to the best sightlines, the entire cutter unit can be
seen from inside the cab.
Wide-angle mirror
Large electrically adjustable, heated mirrors
plus optional wide-angle mirrors ensure
perfect all-round visibility.
5
6
Robust grain concaveWith one of the largest concave areas in its power class, the 5185 E drives in the large harvest volumes in the shortest time. The different wire spacings within the concave are the main reason for this: While the wire spacing in the front area is narrow to ensure intensive threshing, the wider wire spacings in the rear part of the concave permit a higher separation capacity.
Closed high-performance straw walkerConnected to the threshing unit, the straw is then effec-tively loosened using a 4.30 m walker with a 150 mm stroke. Four 250 mm high steps create a loose straw mat, which permits residual grain to be separated per-fectly in the huge separation area. The closed straw walkers distribute the grain uniformly over the entire width of the preparation floor for efficient separation.
The reliable FreeFlow tableWith a working width from 4.20 m to 6.00 m, the FreeFlow table can tackle all kinds of conditions. It is especially stable and maintenance-friendly because the components are bolted on. With 1,220 cuts per min-ute, the high speed of the cutterbar ensures a clean cut and a low power requirement. Then the large intake auger, with a diameter of 580 mm, moves the crop swiftly and uniformly to the crop elevator – best condi-tions for maximum area coverage and the best harvest-ing results.
High-capacity threshing cylinderThe threshing cylinder of the 5185 E with its 600 mm diameter provides a high degree of momentum and is highly efficient. Eight counter-rotating threshing bars effectively separate the grain during the threshing process. Both the grain and straw are handled very gen-tly and breakage is minimised.
TABLE AND CUTTER UNIT
High torque with less breakage.
7
Sectional concave variant
14 mm and 24 mm
There are two front segments available for
the quick-change sectional concave: 14 mm
concave spacing for the grain harvest,
and 24 mm for the corn harvest.
Front and rear concave setting can be adjusted independently
Front perfect, the rear too: the front and rear concave openings can be
adjusted independently.
You can adapt the threshing unit to any possible harvesting conditions
from the comfort of the cab.
The so-called active, open rear walls of the
steps further improve residual separation.
The optional multi-coupler permits fast turna-
rounds when changing fields.
The FreeFlow table has feed fingers over the
entire width, which increase the throughput of
the intake auger and guarantee active, fast feed
into the crop elevator.
The Schuhmacher knife system is the best in
the industry. With 1,220 cuts per minute, it is
self-cleaning and always remains sharp.
CHOPPER AND CLEANING
Clean chopper results, cleanest crop
HC sievesThe special surface of the HC (HighCapacity) sieves ena-
bles optimised wind flow and cleaning performance.
The HC sieves therefore have a large tolerance range
and seldom need to be adjusted. Even short, brittle
straw is separated effectively. Optionally, the sieves can
be adjusted electrically from the comfort of the cab.
Efficient and economical engine powerThe tried and proven 4-cylinder AGCO Power engine
drives the Fendt 5185 E ahead powerfully with a high
torque. The engine technology is ideally adapted to the
requirements of the Fendt E-Series and provides impres-
sively high robustness while keeping running costs low.
Thanks to the SCR exhaust aftertreatment, the Fendt
E-Series is compliant with Stage 4 / Tier 4 final emis-
sions.
High-performance choppingThe new Fendt E-series is standard-equipped with a
4-row straw chopper and a total of 52 knives. The dou-
ble serrated knives with an infinitely adjustable shear
bar (also serrated) have been fitted for high, uniform
chopping performance. You can set the chopping
length as desired and there is no more worrying about
producing perfect chopping results.
No one cleans betterThe Fendt 5185 E has one of the largest sieve areas in its
power class – and therefore provides maximum clean-
ing capacity. The sectional cleaning system, with its high
dividers on the upper and lower sieves, distributes the
grain-chaff mixture uniformly over the entire cleaning
area, even when working in hilly terrain. Together with
the targeted wind guidance in the individual cleaning
sections, it enables the machine to work at maximum
cleaning capacity.
Sieve extension
Preparation floor
Blower
Grain auger
Rethresher auger
Lower sieve
High-Capacity sieves (HC sieves)
8
Precision as standard: The grinding floor with adjustable
dimple plate is standard and ensures a uniform length of the
chopped straw.
Operators can switch quickly and easily between swathing
and chopping modes, simply by moving a lever.
Double extra: the multi-adjustable chaff spreader with twin rotor (optional).
Engine Fendt 5185 EMax. power (ISO TR14396) kW/hp 129/175Fuel tank capacity litres 450AdBlue tank capacity litres 80
Engine Fendt 5185 EMax. power (ISO TR14396) kW/hp 129/175Fuel tank capacity litres 450AdBlue tank capacity litres 80
9
FENDT E-SERIES
Technical Specifications.
Standard and optional equipmentStandard: g
Optional: c
Fendt 5185 ETable Table widths FreeFlow from – to m 4.20 – 6.00
Cutting frequency FreeFlow Cuts /min. 1,220Chains in crop elevator Number 3
Threshing system Threshing cylinder width mm 1,340Threshing cylinder diameter mm 600Cylinder speed rpm 380 – 1,210Concave angle of wrap 120°Concave area m² 0.99Independent front/rear concave adjustment
g
Concave bars Number 12Beater diameter mm 380
Separation Active total separation area m² 0.99Straw walkers Number 5Straw walkers steps Number 4Straw walker length mm 4,256Straw walker area m² 5.73Total separation area m² 6.72Sectional concave c
Maize equipment kit c
Rice equipment kit c
Cleaning Preparation floor area m² 2.57Total sieve area m² 4.67HC top sieve g
Fan type Radial fanFan speed 350 – 1,050Fan speed (with reducer) 270 – 840Returns to threshing cylinder g
Electric sieve adjustment c
Straw and chaff management
Straw chopper – 52 serrated knives g
Quick-switch between chopping/swathing
g
Chaff spreader c
Fendt 5185 EGrain tank Grain tank capacity litres 5,200
Unloading speed Litres/sec 72Grain tank unloading Top unloadingMaximum unloading height m 4.2
Engine Engine type AGCO PowerType, emissions standard Tier 4 finalType 4-cylinderCubic capacity litres 4.9Max. power (ISO TR14396) kW/hp 129/175Fuel tank capacity litres 450AdBlue tank capacity litres 80
Ground drive Hydrostatic drive g
No. of gears 3Ground speed km/h 0 – 20
Cab Air-conditioning g
Heating g
Digital on-board computer g
Cool box c
Loss indicator c
Reversing camera c
Electrically adjustable heated exterior mirrors
c
Wide-angle mirror c
Weights and dimensions
Length without table m 8.70Height m 4.00Weight base machine, without table kg 10,600
Tyres standard
Front tyres 620/75R30Rear tyres 400/70R20
Transport width with tyres
650/75R32 mm 3,390620/75R30 mm 3,340
10
Safety and Service non-stop.
Contact to Fendt.
fendt.comHere you will find everything online, from bro-chures to technical specifications, reports about customers or the company, up to the Fendt event calendar.
Fendt ConfiguratorWith the Fendt Vehicle Configurator, you can choose from all the available equipment varia-tions and put together the optimally equipped vehicle for your farm. The Fendt Configurator is available online at www.fendt.com, where you will find a quick link to it directly on the start page.
fendt.tvFendt around the clock – our Fendt Media Library makes it possible. Our internet TV pro-vides you with news and information about Fendt 24/7.
facebook.com/FendtGlobalOver 200,000 fans have already friended Fendt on Facebook. Come have a look.
How good is the parts availability for Fendt combines?Due to the tight network of dealer and manu-facturer parts warehouses, we can offer a wide-spread parts supply 24/7 during the harvesting season. As part of our harvest promise, we deliver the required replacement parts within one day or reimburse the costs for a substitute machine. Ask your Fendt dealer about the “Harvest Promise”.
What makes Fendt Service different?For us, service means knowing and understand-ing your work in order to meet your demands for reliability and safety and to act in your eco-nomic interest. We stand behind our products and have developed them for the highest demands and long-term operation. Our service is the partnership aspect for your work.
Where are the Fendt combines developed and manufactured?The Fendt combines are created in Breganze, Italy, in our European Centre of Excellence for Harvesting Technology. The combines also go through numerous intensive tests here before they leave the factory, so they can do their best harvesting job on your farm. Regular certifica-tion according to ISO standards confirms the high quality of the entire production process up until delivery.
11
www.fendt.com
EN/0417
Leaders drive Fendt!
AGCO GmbH – Fendt-Marketing 87616 Marktoberdorf, Germany
Fendt is a worldwide brand of AGCO. All data regarding scope of delivery, appearance, performance, dimensions and weights, fuel consumption and running costs of vehicles reflect the latest information available at the time of print. These may change by the time of purchase. Your Fendt dealer will be happy to inform you about any changes. The vehicles shown do not feature country-specific equipment.