FenwalNET™ 2000 Expansion Enclosure Protection Systems

Post on 13-Apr-2022

1 views 0 download

transcript

R

Protection Systems

TM

A UTC Fire & Security Company

Effective: June 2007

FenwalNET™ 2000Expansion Enclosure

F-74-231

DESCRIPTIONThe FenwalNET™ Expansion Enclosure is a heavy dutyenclosure made of 16 gauge steel. This enclosure is iden-tical in size and color to the FenwalNET 2000 system con-trol panel. This enclosure utilizes the same lock and latchas the control panel. Locking and unlocking is accom-plished with the same key as the control panel.

The enclosure is beige with a FenwalNET 2000 logo onthe door. The door can be easily removed by opening thedoor 90° from its closed position and lifting up from thehinge socket. This feature allows easy access for mainte-nance and installation of the enclosure.

The FenwalNET expansion enclosure is designed toaccommodate three hardware configurations by utilizingthe different back plates listed below:

1. I/O Module Card Cage for mounting up to eight (8) I/O modules with provisions for one (1) I/O mother-board and four (4) power supply modules.

2. Provisions for up to eight (8) power supply modules.3. Two (2) I/O module card cages for mounting up to

sixteen (16) I/O modules with provisions for two (2) I/O motherboards.

The above back plates are illustrated on the reverse sideof this data sheet.

The back plates are easily fastened into the expansionenclosure by seven supplied mounting nuts.

ORDERING INFORMATION

FEATURES• UL Listed• FM Approved• Fits Three Hardware Configurations• Same Size as Main Enclosure• Door Lock• Sturdy Steel Construction

Part Number Description ApproximateShipping Weight

74-100000-505 Expansion Enclosure 25 lb.

74-100000-006 Back Plate, M.B. and4 P.S. Mounting 10 lb.

74-100000-007 Back Plate,8 P.S. Mounting 10 lb.

74-100000-008 Back Plate,2 M.B. Mounting 10 lb.

FenwalNET™ EXPANSION ENCLOSURE BACK PLATES

Figure 1. I/O Module Card Cage with Provisions for One I/O Motherboard and Four Power Supply Modules

(P/N 74-200000-006)

Figure 2. Up to Eight Power Supply Modules(P/N 74-200000-007)

CAT. NO. 74-200000-006

PANEL & M-BOARD ASSYKIDDE-FENWAL INC.

PIN_PADSTACKPIN_PADSTACK

KIDDE-FENWAL INC.

CAT. NO. 74-200000-007

INNER PANEL ASSY

Figure 3. Two I/O Module Card Cages with Provision for Two I/O Motherboards(P/N 74-200000-008)

CAT. NO. 74-200000-008

PANEL & 2 M-BOARDSKIDDE-FENWAL INC.

PIN_PADSTACKPIN_PADSTACK

PIN_PADSTACKPIN_PADSTACK

This literature is provided for informational purposes only. KIDDE-FENWAL, INC. assumes no responsibility for the product’s suitability for a particular application. The prod-uct must be properly applied to work correctly.If you need more information on this product, or if you have a particular problem or ques-tion, contact KIDDE-FENWAL, INC., Ashland, MA 01721. Telephone: (508) 881-2000.

F-74-231 Rev AB © 2007 Kidde-Fenwal Inc. Printed in USA

R

Protection Systems

TM

A UTC Fire & Security Company400 Main StreetAshland, MA 01721Ph: 508.881.2000Fax: 508.881.8920www.fenwalfire.com