Post on 27-Feb-2018
transcript
Fittings
56 Reliance Group of Companies Supporting Every Industry Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking
Fittings
2015-02 v.1.1
King Combinations NipplesHose nipples, made from tubular stock, to fit straight end hose. Threaded end, in all styles, has male NPT thread. Combination nipples are recommended for low-pressure discharge and suction service for compatible liquids.NOTE: Not for compressible products such as air or nitrogen on sizes 1-1/4“ and above.
The working pressure of combination nipples will vary with the size and construction of the hose, the type and number of clamps used, clamp placement, proper installation of clamps, temperature and product being conveyed. In accordance with the RMA bulletin for oil suction and discharge hose, a coupled length of hose, in any size should be tested to 1-1/2 times the working pressure and held for fifteen minutes without leaking or coupling movement. Call us for recommendations specific to the application.NOTE: King Combination Nipples are not recommended for steam.
Size Unplated SteelNPT Ends - Part No.
Plated SteelNPT Ends - Part No.
316 Stainless SteelNPT Ends - Part No.
Grooved EndPlated Steel - Part No.
2" ST25 STC25 RST25 STV252½" ST30 STC30 RST30 STV303" ST35 STC35 RST3 5 STV3 54" ST40 STC40 RST40 STV405" ST5 0 STC50 RST50 STV506" ST60 STC60 RST60 STV608" ST80 STC80 RST80 STV80
Spiral Wrap Hose Protectors and Hose Protection Sleeves Available
Our hose sleeve, wrap, and protectors reduce wear, prevent abrasion, protect your hoses and cables from friction, and shield them from potential damage.
Contact our Order Desk for more information
1-877-955-7115
www.relianceindustrial.com Call your local Reliance office to order at 1-877-955-7115 57
Fittings
2015-02 v.1.1
CamlocksAluminum, Brass and Stainless Steel Available Domestic and Import are Available
Part DC - Dust CapPart No. Size
100DC 1”
120DC 1-1/4"
150DC 1-1/2”
200DC 2"
250DC 2-1/2”
300DC 3"
400DC 4"
500DC 5”
600DC 6”
Part DP - Dust PlugPart No. Size
100DP 1”
120DP 1-1/4"
150DP 1-1/2”
200DP 2"
250DP 2-1/2”
300DP 3"
400DP 4"
500DP 5”
600DP 6”
Part B - CouplerCoupler X Male NPT Thread
Part No. Size
100B 1”
120B 1-1/4"
150B 1-1/2”
200B 2"
250B 2-1/2”
300B 3"
400B 4"
500B 5”
600B 6”
Part C - CouplerCoupler X Hose Shank
Part No. Size
100C 1”
120C 1-1/4"
150C 1-1/2”
200C 2"
250C 2-1/2”
300C 3"
400C 4"
500C 5”
600C 6”
Part A - AdapterAdapter X Female NPT Thread
Part No. Size
100A 1”
120A 1-1/4"
150A 1-1/2”
200A 2"
250A 2-1/2”
300A 3"
400A 4"
500A 5”
600A 6”
Part E - AdapterAdapter X Hose Shank
Part No. Size
100E 1”
120E 1-1/4"
150E 1-1/2”
200E 2"
250E 2-1/2”
300E 3"
400E 4"
500E 5”
600E 6”
Part F - AdapterAdapter X Male NPT Thread
Part No. Size
100F 1”
120F 1-1/4"
150F 1-1/2”
200F 2"
250F 2-1/2”
300F 3"
400F 4"
500F 5”
600F 6”
Part D - CouplerCoupler X Female NPT Thread
Part No. Size
100D 1”
120D 1-1/4"
150D 1-1/2”
200D 2"
250D 2-1/2”
300D 3"
400D 4"
500D 5”
600D 6”
58 Reliance Group of Companies Supporting Every Industry Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking
Fittings
2015-02 v.1.1
Insta-Lock CamlocksAluminum, Brass and Stainless Steel Available
Type A - AdapterAdapter X Female NPT Thread
Part No. Size
A100AL 1”
A125AL 1-1/4"
A150AL 1-1/2”
A200AL 2"
A250AL 2-1/2”
A300AL 3"
A400AL 4"
A500AL 5”
A600AL 6”
Type B - CouplerCoupler X Male NPT Thread
Part No. Size
B100AL 1”
B125AL 1-1/4"
B150AL 1-1/2”
B200AL 2"
B250AL 2-1/2”
B300AL 3"
B400AL 4"
B500AL 5”
B600AL 6”
Type C - CouplerCoupler X Hose Shank
Part No. Size
C100AL 1”
C125AL 1-1/4"
C150AL 1-1/2”
C200AL 2"
C250AL 2-1/2”
C300AL 3"
C400AL 4"
C500AL 5”
C600AL 6”
Type D - CouplerCoupler X Female NPT Thread
Part No. Size
D100AL 1”
D125AL 1-1/4"
D150AL 1-1/2”
D200AL 2"
D250AL 2-1/2”
D300AL 3"
D400AL 4"
D500AL 5”
D600AL 6”
Dust CapPart No. Size
DC100AL 1”
DC125AL 1-1/4"
DC150AL 1-1/2”
DC200AL 2"
DC250AL 2-1/2”
DC300AL 3"
DC400AL 4"
DC500AL 5”
DC600AL 6”
Dust PlugPart No. Size
DP100AL 1”
DP125AL 1-1/4"
DP150AL 1-1/2”
DP200AL 2"
DP250AL 2-1/2”
DP300AL 3"
DP400AL 4"
DP500AL 5”
DP600AL 6”
Type E - AdapterAdapter X Hose Shank
Part No. Size
E100AL 1”
E125AL 1-1/4"
E150AL 1-1/2”
E200AL 2"
E250AL 2-1/2”
E300AL 3"
E400AL 4"
E500AL 5”
E600AL 6”
Type F - AdapterAdapter X Male NPT Thread
Part No. Size
F100AL 1”
F125AL 1-1/4"
F150AL 1-1/2”
F200AL 2"
F250AL 2-1/2”
F300AL 3"
F400AL 4"
F500AL 5”
F600AL 6”
www.relianceindustrial.com Call your local Reliance office to order at 1-877-955-7115 59
Fittings
2015-02 v.1.1
Adapters /Reducers
Spool Adapter Male x Male
Part No. Size
AA200AL 2” x 2”
AA300AL 3” x 3”
AA400AL 4” x 4”
Jump Size FemaleCoupler x Male Adapter
Part No. Size
DA3020AL 2” x 2”
DA3040AL 3” x 3”
DA4030AL 4” x 4”
DA6040AL 6” x 4”
Female Coupler x Female Coupler
Part No. Size
DD300AL 3” x 3”
DD400AL 4” x 4”
In Stock Popular Brands of Oil, Air, Fuel and Hydraulic Filters
60 Reliance Group of Companies Supporting Every Industry Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking
Fittings
2015-02 v.1.1
Cam and Groove Style Dry Disconnect Couplings MDA Maxi-Dry Adapter (Adapter x Female NPT Thread)
Item # Part Name Material Width (P) Thread Size (Q) 40001530 MD15A Aluminum/Buna 3.2 in. 1-1/2" NPT40001530V MD15A Aluminum/Viton® 3.2 in. 1-1/2" NPT40001530T MD15A Aluminum/Teflon® 3.2 in. 1-1/2" NPT40001530E MD15A Aluminum/EPDM 3.2 in. 1-1/2" NPT44001530 MD15A Buna/Stainless Steel 3.2 in. 1-1/2" NPT44001530V MD15A Stainless Steel/Viton® 3.2 in. 1-1/2" NPT44001530T MD15A Stainless Steel/Teflon® 3.2 in. 1-1/2" NPT44001530E MD15A EPDM/Stainless Steel 3.2 in. 1-1/2" NPT40000230 MD20A Aluminum/Buna 3.7 in. 2" NPT40000230V MD20A Aluminum/Viton® 3.7 in. 2" NPT40000230T MD20A Aluminum/Teflon® 3.7 in. 2" NPT40000230E MD20A Aluminum/EPDM 3.7 in. 2" NPT44000230 MD20A Buna/Stainless Steel 3.7 in. 2" NPT44000230V MD20A Stainless Steel/Viton® 3.7 in. 2" NPT44000230T MD20A Stainless Steel/Teflon® 3.7 in. 2" NPT44000230E MD20A EPDM/Stainless Steel 3.7 in. 2" NPT40000330 MD30A Aluminum/Buna 5.6 in. 3" NPT
40000330V MD30A Aluminum/Viton® 5.6 in. 3" NPT40000330T MD30A Aluminum/Teflon® 5.6 in. 3" NPT40000330E MD30A Aluminum/EPDM 5.6 in. 3" NPT44000330 MD30A Buna/Stainless Steel 5.6 in. 3" NPT44000330V MD30A Stainless Steel/Viton® 5.6 in. 3" NPT44000330T MD30A Stainless Steel/Teflon® 5.6 in. 3" NPT44000330E MD30A EPDM/Stainless Steel 5.6 in. 3" NPT40000340 MD40A Aluminum/Buna 5.6 in. 4" NPT40000340V MD40A Aluminum/Viton® 5.6 in. 4" NPT40000340E MD40A Aluminum/EPDM 5.6 in. 4" NPT
www.relianceindustrial.com Call your local Reliance office to order at 1-877-955-7115 61
Fittings
2015-02 v.1.1
MDD Maxi-Dry Coupler (Coupler x Female NPT Thread)
Item # Part Name Material Thread Size (H) Coupler Size (I) 40001500 MD15D Aluminum/Buna 1-1/2" NPT 2 in.40001500V MD15D Aluminum/Viton® 1-1/2" NPT 2 in.40001500T MD15D Aluminum/Teflon® 1-1/2" NPT 2 in.40001500E MD15D Aluminum/EPDM 1-1/2" NPT 2 in.44001500 MD15D Stainless Steel/Buna 1-1/2" NPT 2 in.44001500V MD15D Stainless Steel/Viton® 1-1/2" NPT 2 in.44001500T MD15D Stainless Steel/Teflon® 1-1/2" NPT 2 in.44001500E MD15D Stainless Steel/EPDM 1-1/2" NPT 2 in.40000200 MD20D Aluminum/Buna 2" NPT 2.5 in.40000200V MD20D Aluminum/Viton® 2" NPT 2.5 in.40000200T MD20D Aluminum/Teflon® 2" NPT 2.5 in.40000200E MD20D Aluminum/EPDM 2" NPT 2.5 in.44000200 MD20D Stainless Steel/Buna 2" NPT 2.5 in.44000200V MD20D Stainless Steel/Viton® 2" NPT 2.5 in.44000200T MD20D Stainless Steel/Teflon® 2" NPT 2.5 in.44000200E MD20D Stainless Steel/EPDM 2" NPT 2.5 in.40000300 MD30D Aluminum/Buna 3" NPT 4 in.40000300V MD30D Aluminum/Viton® 3" NPT 4 in.40000300T MD30D Aluminum/Teflon® 3" NPT 4 in.40000300E MD30D Aluminum/EPDM 3" NPT 4 in.44000300 MD30D Stainless Steel/Buna 3" NPT 4 in.44000300V MD30D Stainless Steel/Viton® 3" NPT 4 in.44000300T MD30D Stainless Steel/Teflon® 3" NPT 4 in.44000300E MD30D Stainless Steel/EPDM 3" NPT 4 in.40000342 MD40D Aluminum/Buna 4" NPT 4 in.40000342V MD40D Aluminum/Viton® 4" NPT 4 in.
62 Reliance Group of Companies Supporting Every Industry Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking
Fittings
2015-02 v.1.1
MD90 Maxi-Dry Coupler 90º SwivelItem # Part Name Material Thread Size (H) Coupler Size (I) 40000200S MD20DSW Aluminum/Buna 2" NPT 2-1/2 in.40000200SV MD20DSW Aluminum/Viton® 2" NPT 2-1/2 in.40000200ST MD20DSW Aluminum/Teflon® 2" NPT 2-1/2 in.40000200SE MD20DSW Aluminum/EPDM 2" NPT 2-1/2 in.44000200S MD20DSW Stainless/Buna 2" NPT 440000300S MD30DSW Aluminum/Buna 3" NPT 440000300SV MD30DSW Aluminum/Viton® 3" NPT 444000300S MD30DSW Stainless/Buna 3" NPT 444000300SE MD30DSW Stainless/EPDM 3" NPT 4
MDDSSW Maxi Dry Straight Swivel (Coupler x Female NPT Thread Swivel)
Item # Part Name Material Thread Size (H) Coupler Size (I) 40000260 MD20DSTRSW Aluminum/Buna 2" NPT 2-1/2 in40000260V MD20DSTRSW Aluminum/Viton® 2" NPT 2-1/2 in40000360 MD30DSTRSW Aluminum/Buna N/A N/A40000360V MD30DSTRSW Aluminum/Viton® N/A N/A
MDPFA Maxi-Dry (Pipe Flange x Adapter)
Item # Part Name Material Size 47000230 MD20PFA Stainless Steel/Buna 2 in.47000230V MD20PFA Stainless Steel/Viton® 2 in.47000230T MD20PFA Stainless Steel/Teflon® 2 in.47000330 MD30PFA Stainless Steel/Buna 3 in.47000330T MD30PFA Stainless Steel/Teflon® 3 in.
www.relianceindustrial.com Call your local Reliance office to order at 1-877-955-7115 63
Fittings
2015-02 v.1.1
Ultra-Lite Sleeves and Ferrules y Light Weight y Non-Sparking y PT Ultra Lite Sleeves able to meet Electrical Continuity tested per NAHAD 500.5.4 Guidelines y Ease of Hose Assembly Installation
Crimp FerrulesPart No. Material Size Sleeve ID10116C50SS Stainless Steel 1 in. 1.500 in.40426C50SS Stainless Steel 4 in. 4.813 in.40428C50CS Plated Carbon Steel 4 in. 4.875 in.40428CSCS Plated Carbon Steel 4 in. 4.875 in.
For best results these Ferrules should only be used with C50 bodies (external crimp).Designed to use with PT shanked fittings and Pro-Grip™ C50 bodies.
Crimp SleevesPart No. Material Size Sleeve ID10116CSSS Stainless Steel 1 in. 1.500 in.15202CSSS Stainless Steel 1-1/2 in. 2.063 in.20220CSCS Plated Carbon Steel 2 in. 2.625 in.20224CSCS Plated Carbon Steel 2 in. 2.750 in.30324CSCS Plated Carbon Steel 3 in. 3.750 in.30328CSCS Plated Carbon Steel 3 in. 3.875 in.
C50 Crimp Ferrule
C50 Crimp Sleeve
1307 8 St, Nisku, AB Tel:(780) 955-7444 Servco Oilfield Supply is division of Reliance
Alberta’s Well Service Supply Specialist
64 Reliance Group of Companies Supporting Every Industry Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking
Fittings
2015-02 v.1.1
Safety Bumps® An alternative choice to the traditional cam and groove caps and plugs, providing a comfort-able handle for the driver’s hand and a ‘’bump’’ that extends beyond the hose fittings and ears, protecting them from damage.
Safety Bumps®are available in a hazardous/petroleum configuration (black poly) with an antistatic additive, a food grade certified composite (white) and a septic configuration (blue), all made from a glass-filled composite.
Safety Locks™, patent pending, is an alternative product to the Velcro straps with an easy-to-install and easy-to remove, heavy duty “clip”which clicks into place over the ears.
Part No. Description20SB-F 2” Female - Antistatic Poly20SB-L 2” Lock - Antistatic Poly20SB-M 2” Male - Antistatic Poly30SB-F 3” Female - Antistatic Poly30SB-L 3” Lock - Antistatic Poly30SB-M 3” Male - Antistatic Poly40SB-F 4” Female - Antistatic Poly40SB-L 4” Lock - Antistatic Poly40SB-M 4” Male - Antistatic Poly20SBT 2” Safety Bump Replacement Arms30SBT 3”, 4” Safety Bump Replacement Arms
Punch-Lok ToolThe portable P-1000 weighs only 2 1/2 pounds
y Drop forged y Double plated tempered steel constructionPart No. DescriptionFO40 P-1000™ Loking Tool
Open End ClampsPart No. DescriptionFO40 10 in. Galv. Carbon Steel
Open End Clamp
Punch Type ClampsPart No. DescriptionP-3 13/16 in. Galv. Carbon SteelP-4 1 in. Galv. Carbon SteelP-5 1-1/4 in. Galv. Carbon SteelP-6 1-1/2 in. Galv. Carbon SteelP-7 1-3/4 in. Galv. Carbon SteelP-8 2 in. Galv. Carbon SteelP-10 2-1/2 in. Galv. Carbon SteelP-12 3 in. Galv. Carbon SteelP-14 3-1/2 in. Galv. Carbon SteelP-16 4 in. Galv. Carbon SteelP-18 4-1/2 in. Galv. Carbon SteelP-20 5 in. Galv. Carbon SteelP-24 6 in. Galv. Carbon SteelP-28 7 in. Galv. Carbon SteelP-32 8 in. Galv. Carbon Steel
www.relianceindustrial.com Call your local Reliance office to order at 1-877-955-7115 65
Fittings
2015-02 v.1.1
Crimp Fittings
Other configurations availableContact Order Desk for more information
1-877-955-7115
O-Ring Face SealMale JIC Male NPT Swivel Male NPT
Female JIC Swivel Female Pipe Swivel Female JIC 45° Bend
Female JIC 90° Bend Code 61/62 Flange 45° Bend Code 61/62 Flange 90° Bend Code 61/62 Flange Straight
66 Reliance Group of Companies Supporting Every Industry Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking
Fittings
2015-02 v.1.1
Adapters
We offer a wide range of adapters in various sizes. Reliance is an Eaton Platinum Distributor
2087 2090 2091 O-Ring Face Seal
2021 2023 2024 2040
202702 2061 2062 2089
www.relianceindustrial.com Call your local Reliance office to order at 1-877-955-7115 67
Fittings
2015-02 v.1.1
ISO-B Quick Coupler HK Series (Steel)ISO 7241/1 B InterchangeEaton’s HK Series coupling sets the industry standard for ISO B Couplings. The HK Series features a rugged ball latch mechanism with automatic self-sealing poppet valves in a wide array of port configurations and multiple valved and non-valved configurations.
y Meets dimensional requirements to ISO standard 7241/1 Series B y The coupling that sets the industry standard y Self-sealing poppet valve design provides excellent high and low pressure sealing y Standard seal material: Buna-N y Seal options available in PTFE, Neoprene, FKM, EPDM, and Kalrez® y Standard body material: Zinc trivalent plated steel with stainless steel springs, balls and
retaining rings. y PTFE back up rings in sockets (females)
Body Size Max. OperatingPressure
bar psi1/8 in. 275 40001/4 in. 345 50003/8 in. 255 40001/2 in. 345 50003/4 in. 275 4000
1 in. 275 4000
Available in Brass and Stainless Steel
Hydrostatic Pressure TestingAt Reliance, we have in-house capabilities of hydrostatically pressure testing all hose assemblies to the required PSI.
Test charts are provided and recommendations are made based on visual and failed hoses that were tested.
68 Reliance Group of Companies Supporting Every Industry Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking
Fittings
2015-02 v.1.1
T-Bolt Clamps y Can be applied with a standard
7/16” socket wrench y ¾” wide, .025” thick, 300 series
stainless steel band y Alloy steel bolt, torque rating: 70 in/lbsPart No. Hose OD
From ToTBC150 1.344" 1.562"TBC175 1.594" 1.812"TBC188 1.724" 1.942"TBC200 1.844" 2.062"TBC225 2.094" 2.312"TBC238 2.224" 2.442"TBC250 2.344" 2.562"TBC256 2.326" 2.622"TBC263 2.396" 2.692"TBC275 2.516" 2.812"TBC288 2.646" 2.942"TBC300 2.766" 3.062"TBC312 2.886" 3.182"TBC325 3.016" 3.312"TBC350 3.266" 3.562"TBC375 3.516" 3.812"TBC382 3.586" 3.882"TBC400 3.766" 4.062"TBC425 4.016" 4.312"TBC450 4.266" 4.562"TBC475 4.516" 4.812"TBC500 4.766" 5.062"TBC525 5.016" 5.312"TBC550 5.266" 5.562"TBC575 5.516" 5.812"TBC600 5.766" 6.062"
Spiral Clamps y More than one clamp may be needed per size, contact the hose manufacturer for
more information y Due to fluctuations in the OD of hose each individual installation should be checked
for use on convoluted cover hose y To determine which style clamp is needed for your hose look at the end of the hose; if
the helix spirals in a clockwise direction away from you (along the hose), a clockwise clamp is needed. If the helix spirals in a counterclockwise direction away from you, a counterclockwise clamp is needed. Examples include, but are not limited to: Kuriyama convoluted hose uses
y Counter clockwise clamps; Pacific Echo and Kana Flex use clockwise clamps; Continen-tal ContiTech uses both counter clockwise and clockwise
Part No.Plated Steel, Right Hand
Part No.Plated Steel, Left Hand
Size Hose OD
From ToSC150 SCCW150 1½" 1-34/64" 1-52/64"SC200 SCCW200 2" 2-18/64" 2-32/64"SC250 SCCW250 2½" 2-46/64" 3-8/64"SC300 SCCW300 3" 3" 3-32/64"SC400 SCCW400 4" 4" 4-32/64"SC500 SCCW500 5" 5-6/64" 5-32/64"SC600 SCCW600 6" 6-16/64" 7"SC800 SCCW800 8" 8-32/64" 9-16/64"SC1000 SCCW1000 10" 10-40/64" 11-16/64"SC1200 SCCW1200 12" 11-52/64" 12-61/64"
www.relianceindustrial.com Call your local Reliance office to order at 1-877-955-7115 69
Fittings
2015-02 v.1.1
Standard Gear ClampsPart No. DescriptionHC5-6 3/8" to 7/8"HC5-8 7/16" to 1"HC5-80 4-15/16" to 5-3/4"HC6-10 1/2" to 1-1/16"HC6-12 9 /16 " to 1-1/4 "HC6-128 6-1/2" to 8-1/2"HC6-152 8" to 10"HC6-16 11/1 6 " - 1-1/2"HC6-188 10-1/4" to 12/1/4"HC6-20 7/8" to 1-3/4"HC6-200 11" to 13"HC6-24 1-1/16" to 2"HC6-28 1-5/16 to 2-1/4"HC6-32 1-9/16" to 2-1/2"HC6-36 1-13/16" to 2-3/4"HC6-40 2-1/16" to 3"HC6-44 2-9/16" to 3-1/2"HC6-48 2-9/16" to 3-1/2"HC6-4TB 5/16" to 5/8", Thin Band 5/16"HC6-52 2-13/16" to 3-3/4 "HC6-56 3-1/16 " to 4"HC6-6 3/8" to 7/8"HC6-64 3-9/16" to 4-1/2"HC6-6TB 7/16" to 7/8", Thin Band 5/16"HC6-72 3" to 5"HC6-80 3-1/2" to 5-3/4"HC6-88 4" to 6"HC6-96 4-1/2" to 6-1/2"
200 Series – Butterfly Valve(Wafer Style)
y ANSI 125/150 Flange Capable y Stocking Sizes: 2” – 24” y Made to order: 26” – 72” y Pressure: 200 PSI NSCWP y Features: Pinless Disc, Lever or Gear Operated y Body Material: Ductile Iron, Epoxy Coated y Stainless Steel & Carbon Steel Body available
upon request y Disc Materials: Ductile Iron – Nickel Plated,
Aluminum Bronze, Stainless Steel y Other Disc materials available upon request y Seat Materials: Buna, EPDM, Natural Rubber y Other Seat materials available upon request y Stem: Double D Style, 416 Stainless Steel y 316 SS or Monel Stem available upon request
Note: Lug Style Butterfly Valves are suitable for dead end service only when accompanied by a blind flange
For actuators please call for information.
Full Port Brass Ball Valves
y 600 WOG - 150 SWP y Full Port y Bronze Body y BlowOut Proof Stem y Teflon Seats y Threaded Ends Comply w/ ANSI B2.1 y ASTM B62 85/5/5/5 y Conforms to MSS-SP-110 Specifications y Sizes 1/4” - 4”
70 Reliance Group of Companies Supporting Every Industry Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking
Fittings
2015-02 v.1.1
Shurjoint Grooved Piping SystemThe Shurjoint grooved piping system is a mechanical pipe joining method which first involves the grooving of the pipe ends to be connected. Next a specially designed and formulated gasket is stretched over the pipe ends and the coupling segments are placed over the gasket. The bolts and nuts are then assembled and tightened resulting in a secure and leak tight joint.
Model 7705 Standard Flexible CouplingPart No. Description7705-24-T 1.5” 7705-32-T 2”7705-40-T 2.5”7705-48-T 3”7705-64-T 4”7705-96-T 6”7705-128-T 8”7705-160-T 10”7705-192-T 12”
Model 7707 Heavy Duty Flexible CouplingPart No. Description7707-24-T 1.5” 7707-32-T 2”7707-48-T 3”7707-64-T 4”7707-80-T 5”7707-96-T 6”7707-128-T 8”7707-192T 12”
Model 7110 90° ElbowPart No. Description7110-24 1.5” 90° Elbow7110-32 2” 90° Elbow7110-40 2.5” 90° Elbow7110-48 3” 90° Elbow7110-64 4” 90° Elbow7110-96 6” 90° Elbow7110-128 8” 90° Elbow
Model 7120 TeePart No. Description7120-48 3” Tee7120-64 4” Tee7120-96 6” Tee7120-128 8” Tee
Model 7111 45° ElbowPart No. Description7111-32 2” 45° Elbow7111-40 2.5” 45° Elbow7111-48 3” 45° Elbow7111-64 4” 45° Elbow7111-96 6” 45° Elbow
Model 7150 Concerntric Reducer
Part No. Description7150-48-16 3” x 1” 7150-48-32 3” x 2” 7150-64-48 4” x 3” 7150-96-64 6” x 4”
Model 7160 End CapPart No. Description7160-32 2” End Cap7160-48 3” End Cap7160-64 4” End Cap7160-80 5” End Cap7160-96 6” End Cap7160-128 8” End Cap
www.relianceindustrial.com Call your local Reliance office to order at 1-877-955-7115 71
Fittings
2015-02 v.1.1
D.O.T. Air Brake TubeAir brake tube is designed for use with truck, trailer and other mobile air brake and auxiliary sys-tems. This lightweight, flexible and UV stabilized tube is highly resistant to abrasion, oil, grease and road salt.Colors: Black, Blue, Green, Orange, Red, YellowTemperature: -40°F to +200°F, -40°C to +93°CMeets or exceeds: D.O.T. F.M.V.S.S. 106S.A.E J844 test requirements
Type 3A Non-ReinforcedPart No. Tube O.D.
(inches)Wall Thickness
(inches)Working Pressure
(psi)1485-3 3/16 0.035 2501485-4 1/4 0.040 3001485-5 5/16 0.040 250
Type 3B ReinforcedPart No. Tube O.D.
(inches)Wall Thickness
(inches)Working Pressure
(psi)1485-6 3/8 0.062 3501485-8 1/2 0.062 2401485-10 5/8 0.092 2251485-12 3/4 0.092 200
D.O.T. recognized for all air brake applications except those for use frame and axle or between towed and towing vehicles.
Model SJ-200 Low-profile Butterfly ValveThe Shurjoint Model SJ-200 Butterfly Valve is a low profile, grooved-end butterfly valve for oil & gas and or mining services. Working pressure is rated up to 232 psi / 1600 kPa and service tem-peratures up to +180°F/+82°C (Nitrile body liner).
The Model SJ-200 features a fully rubber lined body with 316 stainless steel disc. The end-to-end dimensions conform to MSS SP-67. The lever handle is equipped with a tamper resistant locking device.
Part No. Nominal(inches)
Pipe O.D.(inches)
Weight
SJ-200-32 2 2.375 2.0SJ-200-48 3 3.50 4.2SJ-200-64 4 4.50 8.6SJ-200-96 6 6.625 22.2
72 Reliance Group of Companies Supporting Every Industry Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking
Fittings
2015-02 v.1.1
Brass Push -to-Connect FittingsQuick Connect Full flow Design Brass Construction for use with Polyethyene, Nylon, and Polyurethane Tubes
Union CouplingPart No. TubePC62-2 1/8PC62-2-1/2 5/32PC62-4 1/4PC62-6 3/8PC62-8 1/2PC62R-64 3/8 to 1/4
Connector Tube to Female PipePart No. Tube PipePC66-2A 1/8 1/8PC66-2-1/2A 5/32 1/8PC66-4A 1/4 1/8PC66-4B 1/4 1/4PC66-6B 3/8 1/4PC66-6C 3/8 3/8
Bulkhead UnionPart No. TubePC77-4 1/4PC77-6 3/8
Connector Tube to Male PipePart No. Tube PipePC68-2X1 1/8 1/16PC68-2A 1/8 1/8PC68-2-1/2X0 5/32 10-32PC68-2-1/2A 5/32 1/8PC68-2-1/2B 5/32 1/4PC68-3A 3/16 1/8PC68-4X0 1/4 10-32PC68-4X1 1/4 1/16PC68-4A 1/4 1/8PC68-4B 1/4 1/4PC68-4C 1/4 3/8PC68-6A 3/8 1/8PC68-6B 3/8 1/4PC68-6C 3/8 3/8PC68-6D 3/8 1/2PC68-8B 1/2 1/4PC68-8C 1/2 3/8PC68-8D 1/2 1/2
Bulkhead Union Tube to Female PipePart No. Tube PipePC86-4A 1/4 1/8PC86-4B 1/4 1/4PC86-6B 3/8 1/4
90° Elbow Tube to TubePart No. TubePC65-2 1/8PC65-4 1/4PC65-6 3/8PC65-8 1/2
90° Elbow Tube to Female PipePart No. Tube PipePC70-2-1/2A 5/32 1/8PC70-4A 1/4 1/8PC70-4B 1/4 1/4
www.relianceindustrial.com Call your local Reliance office to order at 1-877-955-7115 73
Fittings
2015-02 v.1.1
Union Tee Tube Each EndPart No. TubePC64-2 1/8PC64-2-1/2 5/32PC64-3 3/16PC64-4 1/4PC64-6 3/8PC64-8 1/2
Tee End Tube and Male Pipe Center TubePart No. Tube PipePC71-4B 1/4 1/4
Tee End Tube and Male Pipe Swivel Center TubePart No. Tube PipePC71SW-4A 1/4 1/8PC71SW-4B 1/4 1/4PC71SW-6C 3/8 3/8
Tee Ends Tube Center Male PipePart No. Tube PipePC72-4A 1/4 1/8PC72-4B 1/4 1/4PC72-6B 3/8 1/4PC72-6C 3/8 3/8PC72-8C 1/2 3/8
90° Elbow Tube to Male PipePart No. Tube PipePC69-2A 1/8 1/8PC69-2-1/2A 5/32 1/8PC69-3A 3/16 1/8PC69-4A 1/4 1/8PC69-4B 1/4 1/4PC69-4C 1/4 3/8PC69-6A 3/8 1/8PC69-6B 3/8 1/4PC69-6C 3/8 3/8PC69-8B 1/2 1/4PC69-8C 1/2 3/8PC69-8D 1/2 1/2
90° Elbow Tube to Male Pipe SwivelPart No. Tube PipePC69SW-2A 1/8 1/8PC69SW-2-1/2X0 5/32 10-32PC69SW-2-1/2A 5/32 1/8PC69SW-2-1/2B 5/32 1/4PC69SW-3A 3/16 1/8PC69SW-4A 1/4 1/8PC69SW-4B 1/4 1/4PC69SW-4C 1/4 3/8PC69SW-6A 3/8 1/8PC69SW-6B 3/8 1/4PC69SW-6C 3/8 3/8PC69SW-6D 3/8 1/2PC69SW-8C 1/2 3/8PC69SW-8D 1/2 1/2
90° Elbow Tube to Swivel Female Pipe
Part No. Tube PipePC70SW-4A 1/4 1/8PC70SW-4B 1/4 1/4
74 Reliance Group of Companies Supporting Every Industry Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking
Fittings
2015-02 v.1.1
Brass D.O.T. Air Brake FittingsComplete with Fixed Inserts
Brass InsertPart No. For Tube I.D.1481-2 .0781481-4 .1701481-5 .2321481-6 .2501481-8 .3751481-10 .4401481-12 .566
SleevePart No. Tube1460-4 1/41460-6 3/81460-8 1/21460-10 5/81460-12 3/4
NutPart No. Tube1461-4 1/41461-6 3/81461-8 1/21461-10 5/81461-12 3/4
Connector Tube to Female PipePart No. Tube Pipe1466-4A 1/4 1/81466-4B 1/4 1/41466-4C 1/4 3/81466-6A 3/8 1/81466-6B 3/8 1/41466-6C 3/8 3/81466-8C 1/2 3/81466-8D 1/2 1/21466-10C 5/8 3/81466-10D 5/8 1/21466-12D 3/4 1/21466-12E 3/4 3/4
Connector Tube to Male PipePart No. Tube Pipe1468-4-1 1/4 1/161468-4A 1/4 1/81468-4B 1/4 1/41468-4C 1/4 3/81468-4D 1/4 1/21468-6A 3/8 1/81468-6B 3/8 1/41468-6C 3/8 3/81468-6D 3/8 1/21468-8B 1/2 1/41468-8C 1/2 3/81468-8D 1/2 1/21468-8E 1/2 3/41468-10C 5/8 3/81468-10D 5/8 1/21468-10E 5/8 3/41468-12D 3/4 1/21468-12E 3/4 3/4
Union CouplingPart No. Tube1462-4 1/41462-6 3/81462-8 1/21462-10 5/81462-12 3/4
www.relianceindustrial.com Call your local Reliance office to order at 1-877-955-7115 75
Fittings
2015-02 v.1.1
45° Elbow Tube to Male PipePart No. Tube Pipe1474-4A 1/4 1/81474-4B 1/4 1/41474-6B 3/8 1/41474-6C 3/8 3/81474-6D 3/8 1/21474-8B 1/2 1/41474-8C 1/2 3/81474-8D 1/2 1/21474-10D 5/8 1/2
90° Elbow Tube to Female PipePart No. Tube Pipe1470-4A 1/4 1/81470-4B 1/4 1/41470-6A 3/8 1/81470-6B 3/8 1/41470-6C 3/8 3/81470-8C 1/2 3/81470-8D 1/2 1/21470-10D 5/8 1/21470-12D 3/4 1/2
Tee Ends Tube to Male Pipe Center TubePart No. Tube Pipe1471-4A 1/4 1/81471-4B 1/4 1/41471-6B 3/8 1/41471-6C 3/8 3/81471-8C 1/2 3/81471-8D 1/2 1/21471-10D 5/8 1/21471-12D 3/4 1/21470-12D 3/4 1/2
Tee Tube Three EndsPart No. Tube1464-4 1/41464-6 3/81464-8 1/21464-10 5/81464-12 3/4
Part No. Reducing1 2 3
1464R-64 3/8 3/8 1/41464R-86 1/2 1/2 3/8
90° Elbow Tube to Male PipePart No. Tube Pipe1469-4A 1/4 1/81469-4B 1/4 1/41469-4C 1/4 3/81469-4D 1/4 1/21469-6A 3/8 1/81469-6B 3/8 1/41469-6C 3/8 3/81469-6D 3/8 1/21469-8B 1/2 1/41469-8C 1/2 3/81469-8D 1/2 1/21469-10C 5/8 3/81469-10D 5/8 1/21469-10E 5/8 3/41469-12D 3/4 1/21469-12E 3/4 3/4
90° Elbow Tube to TubePart No. Tube1465-4 1/41465-6 3/81465-8 1/21465-10 5/81465-12 3/4
76 Reliance Group of Companies Supporting Every Industry Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking
Fittings
2015-02 v.1.1
Tee Ends Tube Center Male PipePart No. Tube Pipe1472-4A 1/4 1/81472-4B 1/4 1/41472-6A 3/8 1/81472-6B 3/8 1/41472-6C 3/8 3/81472-8B 1/2 1/41472-8C 1/2 3/81472-8D 1/2 1/21472-10D 5/8 1/21472-12D 3/4 1/21472-12E 3/4 3/4
Tee Female to Male Pipe Center TubePart No. Tube Pipe1476-4A 1/4 1/81476-6B 3/8 1/4
Bulkhead Union with Lock WasherPart No. Tube1477-4 1/41477-6 3/81477-8 1/21477-10 5/8
Tee Tube to Female Pipe Center Male PipePart No. Tube Pipe1479-4B 1/4 1/4
Fire Extinguisher Service Center
• New Extinguisher Sales
• In House and Onsite Extinguisher
Inspection, Recharge and Maintenance
• Hydrostatic Testing
www.relianceindustrial.com Call your local Reliance office to order at 1-877-955-7115 77
Fittings
2015-02 v.1.1
Brass Push-to-Connect D.O.T. Air Brake Fittings
Tee Ends Tube to Male Pipe Center TubePart No. Tube PipePC1471-4A 1/4 1/8PC1471-4B 1/4 1/4PC1471-6B 3/8 1/4PC1471-6C 3/8 3/8PC1471-8C 1/2 3/8
Tee Ends Tube and Male Pipe Swivel Center Tube
Part No. Tube PipePC1471SW-4A 1/4 1/8PC1471SW-4B 1/4 1/4PC1471SW-6B 3/8 1/4PC1471SW-6C 3/8 3/8PC1471SW-8C 1/2 3/8PC1471SW-8D 1/2 1/2
Tee Ends Tube Center Male PipePart No. Tube PipePC1472-4A 1/4 1/8PC1472-4B 1/4 1/4PC1472-6A 3/8 1/8PC1472-6B 3/8 1/4PC1472-6C 3/8 3/8PC1472-8B 1/2 1/4PC1472-8C 1/2 3/8
Tee Ends Tube Center Male Pipe SwivelPart No. Tube PipePC1472SW-4A 1/4 1/8PC1472SW-4B 1/4 1/4PC1472SW-6B 3/8 1/4PC1472SW-6C 3/8 3/8PC1472SW-8B 1/2 1/4PC1472SW-8C 1/2 3/8PC1472SW-8D 1/2 1/2
Tee Ends Tube Center Female PipePart No. Tube PipePC1478-4A 1/4 1/8PC1478-4B 1/4 1/4PC1478-6B 3/8 1/4
Tee Ends Tube Center Female Pipe SwivelPart No. Tube PipePC1478SW-4A 1/4 1/8PC1478SW-6B 3/8 1/4
Tube InsertPart No. TubePC1400-4 1/4PC1400-6 3/8PC1400-8 1/2
78 Reliance Group of Companies Supporting Every Industry Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking
Fittings
2015-02 v.1.1
Field KitsAir Brake Tube Field Repair KitThis kit includes a selection of Push-To-Connect fittings and tube to complete many temporary air brake tube repairs in the field or shop. Single sided carry case,with handle.Push-To-Connect; Tube Repair Kit Selection:
Part No. Quantity
1485-4-CUT 24 In.
1485-6-CUT 24 In.
1485-8-CUT 24 In.
PC1462-4 2
PC1462-6 2
Part No. Quantity
PC1462-8 2
PC1468-4A 2
PC1468-6B 2
PC1468-6C 2
PC1468-8C 1
Part No. Quantity
PC1469-4A 2
PC1469-6B 2
PC1469-8C 1
TK-1 1
ABFR-BOX-1 1
ABFR-KIT-1-PC
Part No. Quantity
HAB-6-CUT 16 In.
HAB-8-CUT 16 In.
110-CB 2
110-DC 2
121-M8 1
Part No. Quantity
1492-6S 1
1492-8S 1
1492SW-6 1
1492SW-8 1
4134-6B 2
Part No. Quantity
4134-6C 2
4134-8C-WH 2
4134-8D-WH 2
TK-1 1
ABFR-BOX-1 1
Designed for use in the field, this kit includes a selection of items to complete many temporary air brake hose repairs. Single sided carry case, with handle.D.O.T. Air Brake Hose Repair Kit Selection:
ABFR-KIT-HAB
Air Brake Service KitDesigned for use in the field or shop, this kit includes a selection of items to complete many general repairs. New Compact Double sided carry case, with handle.D.O.T. Air Brake & Pipe; Service Kit Selection:
Part No. Qty
103-A 2
103-B 2
103-C 2
103-D 1
110-BA 3
110-CB 2
110-DC 2
121-B 3
121-C 2
121-D 2
121-M8 2
Part No. Qty
122-B 3
122-C 2
122-D 2
1460-4 3
1460-6 3
1460-8 3
1460-10 2
1461-4 3
1461-6 3
1461-8 3
1461-10 2
Part No. Qty
1462-4 2
1462-6 2
1462-8 2
1462-10 1
1468-4A 2
1468-4B 2
1468-6B 2
1468-6C 2
1468-8C 2
1469-4A 2
1469-4B 2
Part No. Qty
1469-6B 2
1469-6C 2
1469-8C 2
1481-4 3
1481-6 3
1481-8 3
1481-10 3
X115-B 2
X115-C 2
ABFR-BOX-2 1
ABFR-KIT-2
www.relianceindustrial.com Call your local Reliance office to order at 1-877-955-7115 79
Fittings
2015-02 v.1.1
Brass D.O.T. Air Brake Hose Couplings and Steel Terminal Bolts
SleevePart No. For Hose I.D.1490-6 3/81490-8 1/2
NutPart No. For Hose I.D.1491-6 3/81491-8 1/2
Coupler Assembly (Nut, Sleeve and Coupler)Part No. Hose I.D. Pipe1492-6B 3/8 1/41492-6C 3/8 3/81492-6D 3/8 1/21492-8C 1/2 3/81492-8D 1/2 1/2
Hose Connector for HAB AssembliesPart No. Straight
TreadPipe
4134-6B 3/4-20 1/44134-6C 3/4-20 3/84134-6D 3/4-20 1/24134-8C 3/4-20 3/84134-8D 3/4-20 1/24134-8C-WH 7/8-20 3/84134-8D-WH 7/8-20 1/2
Used with HAB Assemblies Coupler Assembly with Spring Guard(Nut, Sleeve, Coupler, and Spring)
Part No. For Hose I.D. Pipe1493-6B 3/8 1/41493-6C 3/8 3/81493-6D 3/8 1/21493-8C 1/2 3/81493-8D 1/2 1/2
Swivel Coupler Assembly with Spring Guard(Nut, Sleeve, Coupler, and Spring)
Part No. For Hose I.D. Pipe1493SW-6 3/81493SW-8 1/21493SW-6B * 3/8 1/41493SW-6C * 3/8 3/81493SW-8C * 1/2 3/8
* Complete with 4134 series adapter
Hose Connector for HAB AssembliesPart No. Straight
TreadPipe
4134-6B 3/4-20 1/44134-6C 3/4-20 3/84134-6D 3/4-20 1/24134-8C 3/4-20 3/84134-8D 3/4-20 1/24134-8C-WH 7/8-20 3/84134-8D-WH 7/8-20 1/2
Used with HAB Assemblies
Hose SplicerPart No. For Hose I.D.1492-6S 3/81492-8S 1/2
Swivel Coupler Assembly (Nut, Sleeve and Coupler)
Part No. Hose I.D. Pipe1492SW-6 3/8 --1492SW-8 1/2 --1492SW-6B * 3/8 1/41492SW-6C * 3/8 3/81492SW-6D * 3/8 1/21492SW-8C * 1/2 3/8
* Complete with 4134 series adapter
CouplerPart No. For Hose I.D. PipeB1492-6B 3/8 1/4B1492-6C 3/8 3/8B1492-6D 3/8 1/2B1492-8C 1/2 3/8B1492-8D 1/2 1/2
80 Reliance Group of Companies Supporting Every Industry Agriculture | Construction | Forestry | Mining | Oil and Gas | Trucking
Fittings
2015-02 v.1.1
Nut with Spring Hose GuardPart No. For Hose I.D.1494-6 3/81494-8 1/2
Terminal Bolt (Steel)Part No. Female Pipe Length (in.)1495-C 3/8 X 3/8 1-3/81495-L 1/4 X 1/4 1-1/21495-S 1/4 X 1/4 31/32
Terminal Bolt (Brass)Part No. Female Pipe Length (in.)1495B-A 1/8 X 1/8 1-1/21495B-C 3/8 X 3/8 1-1/41495B-D 1/2 X 1/2 1-1/21495B-L 1/4 X 1/4 1-1/21495B-S 1/4 X 1/4 31/32
Terminal Bolt (Steel)Part No. Pipe Length (in.)1496-DC 1/2M X 3/8F 2
Bulkhead Adapter Female Pipe to Nylon TubePart No. For Nylon
Tube O.D.Female Pipe
B1395-4B 1/4 1/4B1395-4C 1/4 3/8B1395-6B 3/8 1/4B1395-6C 3/8 3/8B1395-6D 3/8 1/2B1395-8C 1/2 3/8B1395-8D 1/2 1/2
Terminal BoltPart No. Pipe Material Length
(in.)1497-DB 1/2M X 1/4F Steel 2-3/4
1497-DBS 1/2M X 1/4F (Short)
Brass 1-5/8
Terminal Bolt (Steel)Part No. For Nylon
Tube O.D.Pipe Length
(in.)1498N-6D 3/8 1/2M X 1/4F 2-5/8
(Complete with 1461 series brass nut.)
Part No. For Nylon Tube O.D.
Pipe Length (in.)
1498-6D 3/8 1/2M X 1/4F 3-1/4
(Complete with 1161 series brass nut & sleeve)
Terminal Bolt (Steel)Part No. For Nylon
Tube O.D.For Hose I.D.
1499N-6 * 3/8 3/8
* Complete with 1461 series nut.
Part No. For Copper Tube O.D.
For Hose I.D.
1499-6 3/8 3/8
D.O.T. Air Brake TubeAir brake tube is designed for use with truck, trailer and other mobile air brake and auxiliary systems. This lightweight, flexible and UV stabilized tube is highly resistant to abrasion, oil, grease and road salt.
Part No. Tube O.D.(inches)
Working Pressure (psi)
1485-6 3/8 3501485-8 1/2 240
D.O.T. recognized for all air brake applica-tions except those for use frame and axle or between towed and towing vehicles.
www.relianceindustrial.com Call your local Reliance office to order at 1-877-955-7115 81
Fittings
2015-02 v.1.1
Gladhands (J318)
GH Series - Standard StylePart No. Pipe Size Type Color CodeGHU 1/2 FPT Universal PlainGHE 1/2 FPT Emergency RedGHS 1/2 FPT Service Blue
GH Series with Screen SealPart No. Pipe Size Type Color CodeGHE-SC 1/2 FPT Emergency RedGHS-SC 1/2 FPT Service Blue
GH Series with Umbrella SealPart No. Pipe Size Type Color CodeGHU-2 1/2 FPT Universal PlainGHE-2 1/2 FPT Emergency RedGHS-2 1/2 FPT Service Blue
GHM Series - MountingPart No. Pipe Size Type Color CodeGHM-E 3/8 FPT Emergency RedGHM-S 3/8 FPT Service Blue
GHM Series with Screen SealPart No. Pipe Size Type Color CodeGHM-E-SC 3/8 FPT Emergency RedGHM-S-SC 3/8 FPT Service Blue
Gladhand DummyPart No. DescriptionGH-DUMMY Comes with 26” Security Cable,
Plain Color
Gladhand GripsPart No. DescriptionGH-GRIP Gladhand Grip Handles Sold
Only in sets. (Red and Blue)
Swing Away GladhandPart No. Pipe Size Type Color CodeGHU-SW 3/8 FPT Swing
AwayPlain
GHE-SW 3/8 FPT Swing Away
Red
GHS-SW 3/8 FPT Swing Away
Blue
Replacement SealsPart No. Type Color CodeGH-SEAL Rubber BlackGH-SEAL-2 Rubber
Umbrella SealBlack
GHE-SEAL Polyurethane RedGHE-SEAL-SC Polyurethane
with ScreenRed
GHS-SEAL Polyurethane BlueGHS-SEAL-SC Polyurethane
with ScreenBlue
14CAR3979_Outerwear 2112 Ad_O&GJ.indd 1 6/19/14 3:50 PM
Reliance is your Eaton Platinum Distributor
More Locations to Serve You Better
Toll Free: 1 877 955 7115www.relianceindustrial.com
Head Office (Nisku AB)606 - 19 AvenueNisku, AB T9E 7W1 Tel: 780.955.7115 Fax: 780.955.7121
BrooksBay 3 & 4, 515 – 1st Ave EastBrooks, AB T1R 0H1 Tel: 403.362.4562 Fax: 403.362.4486
Calgary #129-7007 54 St. SE Calgary, AB T2C 3C2 Tel: 403.720.0767 Fax: 403.720.8719
Clairmont 8301 98 StreetClairmont, AB T0H 0W0 Tel: 780.532.4673 Fax: 780.532.4370
Dawson Creek 2612 92 AvenueDawson Creek, BC V1G 4G7 Tel: 250.782.1172 Fax: 250.782.1173
Greeley 2030 E. – 8 St., Suite BGreeley, CO 80631 Tel: 970.346.3751 Fax: 970.353.3168
Houston4115 Kreinhop Road Suite 124Spring, TX 77388 Tel: 281.288.9720
Midland 2904 S County Road 1250Midland, TX 79706-2639 Tel: 432.689.0102 Fax: 432.699.4898
San Antonio 4327 Centergate St.San Antonio, TX 78217 Tel: 210.650.3636 Fax: 210.650.3133
Shreveport 1001 M and O DriveBossier City, LA 71111 Tel: 318.687.5486 Fax: 318.687.5491
Williston 4970 Highway 85Williston, ND 58801 Tel: 701.572.7035 Fax: 701.572.70300
Edson 4637 3 AvenueEdson, AB T7E 1C2 Tel: 780.723.5927 Fax: 780.723.5714
Grande Prairie11450 98 Avenue Grande Prairie, AB T8V 7P4 Tel: 780.532.4702 Fax: 780.539.5510
Lloydminster 5801 63 AvenueLloydminster, AB T9V 3C3 Tel: 780.872.5635 Fax: 780.872.5634
Redcliff #1, 123 Lockwood St. NERedcliff, AB T0J 2P0 Tel: 403.548.7230 Fax: 403.548.7251
Red Deer #110, 7660 76 St. CloseRed Deer, AB T4P 4G6 Tel: 403.309.6729 Fax: 403.309.6780
Reliance Design and Manufacturing: 780.955.3080 | Reliance Hydraulic Services: 780.955.2042Reliance Safety Supply and Service: 780.955.7115 | Reliance Commercial Sign Printing: 780.955.7115
Servco Oilfield Supply: 780.955.7444