Post on 03-Feb-2021
transcript
The Quickstart Board is a finished single voltage source circuit designed for easy integration of FlexiForce sensors. It provides a 0-5V analog voltage output that can be used as an input on your microcontroller or third-party data acquisition system.
BENEFITS•Signal conditioning that allows the ability to adjust or
modify dynamic range
• Eliminates time developing circuits
• Perfect for a plug and play product to drop into a design
*For a limited time only
COMPONENTSThe Quickstart Board contains:
One (1) FlexiForce Quickstart Board
• Dimensions: 1.25” x 1.25”
•Input: 3.3V – 9V
•Output: 0V – 5V nominal (Vin ≥ 5V)
One (1) Battery Clip
Force Range Adjustment for Quickstart Board
Low Force
Range
High Force Range
FlexiForce®Quickstart Board
Data Sheet
SAMPLE SENSORSTwo (2) Free Sample FlexiForce A201 Sensors*
RevA
+1 . 617. 4 6 4 . 4 2 8 3 1 . 8 0 0 . 2 4 8 . 3 6 6 9 | i n f o @ t e k s c a n . c o m | w w w. t e k s c a n . c o m / f l e x i f o r c e
mailto:info%40tekscan.com?subject=http://www.tekscan.com/flexiforce