Post on 06-Nov-2018
transcript
Re S.p.A. via Firenze 320060 Bussero (MI) Italy
T +39 02 9524301 F +39 02 95038986 E info@re-spa.com
Assistenza tecnicaTechnical supportT +39 02 952430.300E support@re-spa.com
Assistenza commercialeSales supportT +39 02 952430.200E sales@re-spa.com
Datasheet 01018/EN - 09/16
The FP.25 board is an analogue current regulator that ensures the current supplied to the electromagnetic powder brake or clutch at the right level.
It is possible to use a closed current loop in order to guarantee that the torque remains stable, irrespective of variations in the supply voltage or the brake/clutch and ambient temperature.
The derivative parameter allows to use a dancing roller system.To semplify the installation procedure, the board is equipped with a 10 poles, screw locking connector.
Analogue current regulator
Closed-loop current regulator
Can be used with dancing roller
Easy installation
Easy calibration
FP.25CURRENT REGULATOR
Re S.p.A. via Firenze 320060 Bussero (MI) Italy
T +39 02 9524301 F +39 02 95038986 E info@re-spa.com
Assistenza tecnicaTechnical supportT +39 02 952430.300E support@re-spa.com
Assistenza commercialeSales supportT +39 02 952430.200E sales@re-spa.com
FP.25/1
Power supply FP.25/1 24 Vdc (±10%) FP.25/2 110/220 Vac -50/60 Hz - Fuse 3,15 A/T
Power 30 W max
Input 0-10 Vdc
Output 0-2 PWM
Current limiter TR1 from -50% to +50%
Polarization TR2 from 0% to 100%
Working temperature 0÷50° C
*Data are subject to technical change without notice
TECHNICAL CHARACTERISTICS
12010
810,51 52,5
2510
112
90
N.4 Ø 4,5
�xable on DIN bar TS 35x7,5
64
91
52,48
10
16
80171
= =
153= =
120
= =
112
= =
Ø 4,50
FUSE
TR1TR2
TR3
FUSE
101 2 3 4 5 6 7 8 9
==
==
==
==
FP25/2