Freedom Universal 2.0

U2.0 Features: Base

2 new base options• Low-profile • 3” stem

Enhanced visual design• 30% physical size reduction to

highlight products not merchandising

U2.0 Features: Puck

Enhanced visual design• 360-degree viewable LED• 30% physical size reduction to

highlight products not merchandising

Improved puck performance• Puck can spin 360-degrees without any

retractor kink or bind• Puck will not get “stuck” in any

orientation

U2.0 features: Puck LED States

*LED will also be off if NO color dip switches are set

*

360-degree Rotating Swivel

Allows puck to rotate 360-degrees without retractor kink/bind

Embedded inside puck handle• Only internal swivel on market• Markets most robust swivel

- Tested for over 250k rotations

Extends lifespan of retractor

Alarm Modules

U2.0 Alarm Modules

35% smaller than U1.0 modules Incorporates built-in EDM

functionality; Onsite headers Supports optional battery back-up Contains series of dip switches

• Color switches activate light ring color options

• Group switches group banks of 4 positions for simplified Lift function

16-position

4-position

U2.0 Alarm Module: Overview

Light Ring Color Options

LED Color Selections (Universal 2.0 pucks only)360-degree light ring that will cause the puck to have a glow effect

Idle - puck is at rest in the baseActive - puck is picked up or in alarming stateAlarm

- Setting color options for both idle and active will result in a 2-color flash when in alarming state

- If only one color option is selected the system flashes between selected color and off

Using U2.0 with Lift

U2.0 will have 2 types of puck configurations• Puck with reedswitch and swivel

- New installations using both U2.0 pucks and U2.0 alarm modules

• Puck with magnet and swivel (Built to order)- Retrofitting current install base- Requires EDM for Lift

Puck with embedded reedswitch will function in new U2.0 lift configuration

Pucks with embedded magnet will function in current (U1.0) configuration• Multi-color LED ring function will be disabled

U2.0 Lift with Reedswitch Embedded in Puck

16-position Alarm Module Dims

Top View Side View

4-position Alarm Module Dims

Top View Side View

Available Accessories

Angled adapter (surfboard II)• Integrated primary sensor eliminating

requirement for secondary sensor

Flat cap (VHB attachment) Anti-rotation sliders Camcorder anti-rotation slider Clover-leaf adapter

Available Accessories

Standard mounting cap No product cap

• Keeps LED lit for unpopulated positions

Power riser cap Offset tripod mount anti-rotation Alarm module back cover plate Spacer for thin fixture tops

Standard Mount Configurations

Standard cap•Adjustable anti-rotation sliders•Main application is merchandising digital cameras

Empty position cap•Used when no product is available to merch•Keep LED lit and cleans-up look of display

Standard cap•Camcorder anti-rotation slider•Main application is merchandising camcorders

Accessory Caps

Angle Adapter•50-degree angle•Used with GPS, cell phones, MP3s, etc..•Integrates connection with primary sensor •Eliminates need for secondary sensor

Flat Adapter•VHB covered cap•Integrates connection with primary sensor•Eliminates need for secondary sensor

Power Riser Adapter•Requires secondary sensor•Used with products that have power connections on bottom of unit

Smart Fit Kits

Same/similar contents as U1.0 will be required to support all SKU categories• Cable, sensor, bracket, manual, etc…

Puck design efficiencies will allow for fewer brackets to be specified in kits• Fewer risers• Uses lower cost accessory pieces• Use of angle adapter for GPS will not require secondary sensor

Most of the existing U1.0 brackets are compatible with U2.0• Upon product release brackets will be designed with intent to function

with C, Univ 1.0 and Univ 2.0• Current SLR bracket not compatible with U2.0

- New SLR bracket in design to function with Freedom C, U1.0 & U2.0