Post on 01-Jul-2018
transcript
172
REFERENCES
1. Mallick, P. K. (1993). Fibre-reinforced composites-materials, manufacturing and
design, 2nd edition, Marcel Dekker, New York.
2. Gibson, R. F. (1994). Principles of composite material mechanics, McGraw Hill,
Singapore.
3. Alexandre, M. and Dubois, P. (2000). Polymer-layered silicate nanocomposites:
preparation, properties and uses of a new class of materials, Materials Science and
Engineering: R: Reports, 28(1-2): 1-63.
4. Pavlidou, S. and Papaspyrides, C.D. (2008). A review on polymer–layered silicate
nanocomposites, Progress in Polymer Science, 33(12): 1119–1198.
5. Hussain, F., Hojjati, M., Okamoto, M. and Gorga, R.E. (2006). Review article:
polymer-matrix nanocomposites, processing, manufacturing, and application: an
overview. Journal of Composite Materials, 40(17): 1511-1575.
6. Utracki, L.A. (2004). Clay-containing polymeric nanocomposites Volume 1,
Rapra Technology Limited, Shawbury, United Kingdom.
7. Pinnavaia, T. J. and Beall, G. W. (2000). Polymer-Clay Nanocomposites, Wiley,
Chichester.
8. Schmidt, D. F. (2003). Polysiloxane / layered silicate nanocomposites : synthesis,
characterization and properties, PhD Thesis, Graduate School of Cornell
University.
9. Usuki, A., Kojima, Y., Kawasumi, M, Okada, A., Fukushima, Y., Kurauchi, T.
and Kamigaito, O. (1993). Synthesis of nylon 6–clay hybrid. Journal of Materials
Research, 8(5):1179– 1184.
10. Luo, J.J. and Daniel, I.M. (2003). Characterization and modeling of mechanical
behavior of polymer/clay nanocomposites. Composite Science and Technology,
63(11): 1607–1616.
11. McWilliams, A. (2010). Nanocomposites, nanoparticles, nanoclays, and
nanotubes, Report Code: NAN021D, published January 2010, BCC Research,
Wellesley, USA
12. "Nanocomposites - A Global Strategic Business Report”, February 2011, Global
Industry Analysts, Inc., San Jose, USA
13. Thomas, S. and Stephen, R., Eitor (2010). Rubber nanocomposites preparation,
properties and applications, John Wiley & Sons (Asia) Pte Ltd, Singapore.
173
14. Sengupta, R., Chakraborty, S., Bandyopadhyay, S., Dasgupta, S., Mukhopadhyay,
R., Auddy, K. and Deuri, A.S. (2007). A short review on rubber/clay
nanocomposites with emphasis on mechanical properties. Polymer Engineering
and Science, 47(11): 1956–1974.
15. Ray, S. S. and Bousima, M. (2005). Biodegradable polymers and their layered
silicate nanocomposites: in greening the 21st century materials world. Progress in
Materials Science, 50(8): 962–1079.
16. Herrmann, W., Uhl, C., Heinrich, G. and Jehnichen, D. (2006). Analysis of
HNBR-montmorillonite nanocomposites morphology, orientation and
macroscopic properties. Polymer Bulletin, 57(3): 395–405.
17. Gatos, K.G., Thomann, R. and Karger-Kocsis, J. (2004). Characteristics of
ethylene propylene diene monomer rubber/organoclay nanocomposites resulting
from different processing conditions and formulations. Polymer International,
53(8): 1191–1197.
18. Chung, D. D. L. (2010). Composite materials, science and applications, Second
Edition, Springer, London.
19. Lubin, G. and Peters, S. T. (1998). Handbook of composites, 2nd Edition,
Chapman & Hall, London.
20. Chen, J.S., Poliks, M.D., Ober, C.K., Zhang, Y., Wiesner, U. and Giannelis, E.P.
(2002). Study of the interlayer expansion mechanism and thermal–mechanical
properties of surface-initiated epoxy nanocomposites. Polymer, 43(18): 4895–
4904.
21. Zeng, Q. H., Yu, A. B., Lu, G. Q. (Max) and Paul, D. R. (2005). Clay-Based
Polymer Nanocomposites: Research and Commercial Development. Journal of
Nanoscience and Nanotechnology, 5(10): 1574–1592.
22. Biswas, M. and Ray, S. S. (2001). Recent progress in synthesis and evaluation of
polymer- montmorillonite nanocomposites. Advances in Polymer Science,
155(2001):167–221.
23. LeBaron, P.C., Wang, Z. and Pinnavaia, T.J. (1999). Polymer-layered silicate
nanocomposites: an overview. Applied Clay Science, 15(1–2):11–29.
24. Giannelis, E. P. (1998). Polymer-layered silicate nanocomposites: synthesis,
properties and applications. Applied Organometallic Chemistry, 12(10–11): 675–
680.
174
25. Schmidt, D., Shah, D. and Giannelis, E. P. (2002). New advances in
polymer/layered silicate nanocomposites. Current Opinion in Solid State and
Materials Science, 6(3):205–212.
26. Fu, S., Feng, X., Lauke, B. and Mai, Y. (2008). Effects of particle size,
particle/matrix interface adhesion and particle loading on mechanical properties of
particulate–polymer composites. Composites: Part B, 39(6): 933–961.
27. Jordan, J., Jacob, K. I., Tannenbaum, R., Sharaf, M. A. and Jasiuk, I. (2005).
Experimental trends in polymer nanocomposites—a review. Materials Science
and Engineering A, 393(1-2): 1–11.
28. Vaia, R. A. andWagner, H. D. (2004). Framework for nanocomposites. Materials
Today, 7(11):32–37.
29. Hu, H., Onyebueke, L. and Abatan, A. (2010). Characterizing and modeling
mechanical properties of nanocomposites- review and evaluation. Journal of
Minerals & Materials Characterization & Engineering, 9(4): 275-319.
30. Crosby, A. J. and Lee, J. (2007) Polymer Nanocomposites: The “Nano” Effect on
Mechanical Properties. Polymer Reviews, 47(2): 217 — 229.
31. Ray, S. S. and Okamoto, M. (2003). Polymer/layered silicate nanocomposites: a
review from preparation to processing. Progress in Polymer Science, 28 (11):
1539–1641.
32. Ray, S. S. and Bousmina, M. (2006). Polymer nanocomposites and their
applications. American Scientific Publishers, California.
33. Sza´zdi, L., Pozsgay, A. and Puka´nszky, B. (2007). Factors and processes
influencing the reinforcing effect of layered silicates in polymer nanocomposites.
European Polymer Journal, 43(2): 345–359.
34. Giannelis, E. P., Krishnamoorti, R. and Manias, E. (1999). Polymer - silicate
nanocomposites: model systems for confined polymers, and polymer brushes.
Advances in Polymer Science, 138(1990): 107 -147
35. Messersmith, P.B. and Giannelis, E. P. (1995). Synthesis and barrier properties of
poly(e-caprolactone)-layered silicate nanocomposites. Journal of Polymer Science
Part A: Polymer Chemistry, 33(7):1047–1057
36. Sadhu, S. and Bhowmick, A. K. (2005). Effect of nanoclay on the dynamic
mechanical properties of styrene butadiene and acrylonitrile butadiene rubber
vulcanizates. Rubber Chemistry and Technology, 78(2): 321–335.
175
37. Sadhu, S. and Bhowmick, A. K. (2004). Preparation and properties of styrene–
butadiene rubber based nanocomposites: the influence of the structural and
processing parameters. Journal of Applied Polymer Science, 92(2): 698–709.
38. Lagaly, G. (1999). Introduction: from Clay Mineral-polymer Interactions to Clay
Mineral polymer Nanocomposites, Applied Clay Science, 15(1-2): 1–9.
39. Choudalakis, G. and Gotsis, A.D. (2009). Permeability of polymer/clay
nanocomposites: a review. European Polymer Journal, 45(4): 967–984.
40. Mittal, V., Editor. (2010). Barrier properties of polymer clay nanocomposites,
Nova Science Publishers, New York.
41. Nah, C., Ryu, H.J., Kim, W.D. and Choi, S. (2002). Barrier property of clay -
acrylonitrile butadiene copolymer nanocomposite. Polymers for Advanced
Technologies, 13(9): 649–652
42. Kim, J., Oh, T. and Lee, D. (2004). Curing and barrier properties of NBR/organo-
clay nanocomposite. Polymer International, 53(4): 406–411.
43. Shields, R. J., Bhattacharya, D. and Fakirov, S. (2008). Oxygen permeability
analysis of microfibril reinforced composites from PE/PET blends. Composites
Part A: Applied Science and Manufacturing, 39(6): 940-949.
44. Mallapragada, S. and Narasimhan, B. Editors. (2005). Handbook of biodegradable
polymeric, materials and their applications, American Scientific Publishers,
California.
45. Dietsche, F., Thomann, Y., Thomann, R. and Mulhaupt, R. (2000). Translucent
acrylic nanocomposites containing anisotropic laminated nanoparticles derived
from intercalated layered silicates. Journal of Applied Polymer Science, 75 (3):
396-406.
46. Mittal, V., Kim, J. K. and Pal, K., Editors. (2011). Recent advances in elastomeric
nanocomposites, Springer, Heidelberg.
47. Romero, D. B., Carrard, M., Heer, W. D. and Zuppiroli, L. (1996). A carbon
nanotube/organic semiconducting polymer heterojunction. Advanced Materials,
8(11): 899–902.
48. Mildred, S. Dresselhaus, Gene Dresselhaus, Phaedon Avouris. (2001). Carbon
nanotubes: synthesis, structure, properties, and applications, Springer, berlin.
49. Lau, K. T., Gu, C. and Hui, D. (2006). A critical review on nanotube and
nanotube/ nanoclay related polymer composite materials. Composites Part B,
37(6): 425–436.
176
50. Bokobza, L. (2007). Multiwall carbon nanotube elastomeric composites: a review.
Polymer, 48(17): 4907 – 4920.
51. Andrews, R. and Weisenberger, M. C. (2004). Carbon nanotube polymer
composites. Current Opinion in Solid State and Materials Science, 8(1): 31–37.
52. Ramanathan, T., Liu, H. and Brinson, L. C. (2005). Functionalized
SWNT/polymer nanocomposites for dramatic property improvement. Journal of
Polymer Science Part B: Polymer Physics, 43(17): 2269- 2279.
53. El-Nashar D. E., Mansour S. H. and Girgis, E. (2006). Nickel and iron nano-
particles in natural rubber composites, Journal of Material Science, 41(16): 5359–
5364.
54. Chen, Y.C., Zhou, S.X., Yang, H.H. and Wu, L.M. (2005). Structure and
properties of polyurethane/nanosilica composites, Journal of Applied Polymer
Science, 95(5): 1032–1039.
55. Cai, L. F., Lin, Z. Y. and Qian, H. (2010). Dispersion of nano-silica in monomer
casting nylon6 and its effect on the structure and properties of composites.
eXPRESS Polymer Letters, 4(7): 397–403.
56. Omar, M. F., Akil, H. M. and Ahmad, Z. A. (2011). Mechanical properties of
nanosilica/polypropylene composites under dynamic compression loading.
Polymer Composites, 32(4): 565–575.
57. Chuayjuljit, S. and Luecha, W. (2011). XSBR/NR rubber blends filled with
polystyrene-encapsulated nanosilica prepared by in situ differential
microemulsion polymerization. Journal of Elastomers and Plastics, Published
online before print June 1, 2011, doi: 10.1177/0095244311405001.
58. Zou, H., Wu, S. and Shen, J. (2008). Polymer/silica nanocomposites: preparation,
characterization, properties, and applications. Chemical Reviews, 108(9): 3893–
3957.
59. Huang, W., Tsai, H. and Lee, W. (2010). Preparation and properties of
thermosensitive organic-inorganic hybrid gels containing modified nanosilica.
Polymer Composites, 31(10): 1712–1721.
60. Joshi, M. and Butola, B. S. (2004). Polymeric nanocomposites—polyhedral
oligomeric silsesquioxanes (POSS) as hybrid nanofiller. Polymer Reviews, 44(4):
389 – 410.
177
61. Madhavan, K. and Reddy, B.S.R. (2009). Structure–gas transport property
relationships of poly(dimethylsiloxane–urethane) nanocomposite membrane.
Journal of Membrane Science, 342(1-2): 291–299.
62. Fina, A., Tabuani, D., Frache, A. and Camino, G. (2005). Polypropylene–
polyhedral oligomeric silsesquioxanes (POSS) nanocomposites. Polymer, 46(19):
7855-7866.
63. Zhao Y. and Schiraldi, D. A. (2005). Thermal and mechanical properties of
polyhedral oligomeric silsesquioxane (POSS)/polycarbonate composites. Polymer,
46(25): 11640-11647.
64. Zhang, Y., Lee, S., Yoonessi, M., Liang, K. and Pittman, C. U. (2006). Phenolic
resin–trisilanolphenyl polyhedral oligomeric silsesquioxane (POSS) hybrid
nanocomposites: structure and properties. Polymer, 47(9): 2984-2996.
65. Madbouly, S. A., Otaigbe, J. U., Nanda, A. K. and Wicks, D. A. (2007).
Rheological behavior of POSS/polyurethane−urea nanocomposite films prepared
by homogeneous solution polymerization in aqueous dispersions.
Macromolecules, 40 (14): 4982–4991.
66. Zeng, J., Kumar, S., Iyer, S., Schiraldi, D. A. and Gonzalez, R. I. (2005).
Reinforcement of poly(ethylene terephthalate) fibers with polyhedral oligomeric
silsesquioxanes (POSS). High Performance Polymers, 17(3): 403-424.
67. Zebarjad, S. M., Sajjadi, S. A., Tahani, M. and Lazzeri, A. (2006). A study on
thermal behaviour of HDPE/CaCO3 nanocomposites. Journal of Achievements in
Materials and Manufacturing Engineering, 17(1-2): 173-176.
68. Osman M. A. and Atallah A. (2006). Effect of the particle size on the viscoelastic
properties of filled polyethylene, Polymer 47(7): 2357-2368.
69. Kuang, Y., Zhao, L., Zhang, S., Zhang, F., Dong, M. and Xu, S. (2010).
Morphologies, preparations and applications of layered double hydroxide micro-
/nanostructures. Materials, 3(12): 5220-5235.
70. Reddy, B. S. R. Editor. (2011). Advances in Diverse Industrial Applications of
Nanocomposites, InTech, Croatia.
71. Jaymand, M. (2011). Synthesis and characterization of an exfoliated modified
syndiotactic polystyrene/Mg–Al-layered double-hydroxide nanocomposite.
Polymer Journal, 43(2): 186–193.
72. Valente, J. S. and Prince, J. (2010). Layered double hydroxides: properties,
applications and synthetic procedures. SciTopics. Retrieved June 27, 2011, from
178
http://www.scitopics.com/Layered_Double_Hydroxides_Properties_Applications_
and_Synthetic_Procedures.html
73. Angellier, H., Molina-Boisseau, S. and Dufresne, A. (2005) Mechanical properties
of waxy maize starch nanocrystal reinforced natural rubber. Macromolecules,
38(22): 9161 - 9170.
74. Cherian, B. M., Pothan, L. A., Nguyen-Chung, T., Mennig, G., Kottaisamy, M.
and Thomas S. (2008). Novel method for the synthesis of cellulose nanofibril
whiskers from banana fibers and characterization. Journal of Agricultural and
Food Chemistry, 56(14): 5617–5627.
75. Henrickson, M., Berglund, L.A., Isaksson, P., Lindstrm, T. and Nishino, T (2008).
Cellulose nanopaper structures of high toughness. Biomacromolecules, 9(6):
1579–1585.
76. Messersmith, P. B. and Giannelis, E. P. (1993). Polymer-layered silicate
nanocomposites: in situ intercalative polymerization of ε-caprolactone in layered
silicates. Chemistry of Materials, 5(8): 1064-1066.
77. Bandyopadhyay, A., Sarkar, M. D. and Bhowmick, A. K. Polymer–filler
interactions in sol–gel derived polymer/silica hybrid nanocomposites. Journal of
Polymer Science Part B: Polymer Physics, 43(17): 2399–2412.
78. Sadeghi, M., Semsarzadeh, M. A., Barikani, M. and Chenar, M. P. (2011). Gas
separation properties of polyether-based polyurethane–silica nanocomposite
membranes. Journal of Membrane Science, 376(1-2): 188-195
79. Wu, Y., Wang, Y., Zhang, H., Wang, Y., Yu, D., Zhang, L. and Yang, J. (2005).
Rubber–pristine clay nanocomposites prepared by co-coagulating rubber latex and
clay aqueous suspension. Composites Science and Technology, 65(7-8): 1195–
1202.
80. Fornes, T. D., Yoon, P. J., Keskkula, H. and Paul D. R. (2001). Nylon 6
nanocomposites: the effect of matrix molecular weight. Polymer, 42(25): 9929 -
9940
81. Goettler, L. A., Lee, K. Y. and Thakkar, H. (2007). Layered silicate reinforced
polymer nanocomposites: development and applications. Polymer Reviews, 47(2):
291 — 317.
82. Naveau, E., Dominkovics, Z., Detrembleur, C., Jérôme, C., Hári, J., Renner, K.,
Alexandre, M. and Pukánszky, B. (2011). Effect of clay modification on the
179
structure and mechanical properties of polyamide-6 nanocomposites. European
Polymer Journal, 47(1): 5–15.
83. Chow, W.S., Bakar, A. A., Ishak, Z. A. M., Karger-Kocsis, J. and Ishiaku, U. S.
(2005). Effect of maleic anhydride-grafted ethylene–propylene rubber on the
mechanical, rheological and morphological properties of organoclay reinforced
polyamide /polypropylene nanocomposites. European Polymer Journal, 41(4):
687–696.
84. Gianelli, W., Ferrara, G., Camino, G., Pellegatti, G., Rosenthal, J. and Trombini,
R.C. (2005). Effect of matrix features on polypropylene layered silicate
nanocomposites. Polymer, 46(18): 7037–7046.
85. Malucelli, G., Ronchetti, S., Lak, N., Priola, A., Dintcheva, N. T. and Mantia, F.
P. L. (2007). Intercalation effects in LDPE/o-montmorillonites nanocomposites.
European Polymer Journal, 43(2): 328–335.
86. Fornes, T. D. and Paul, D. R. (2003). Modeling properties of nylon 6/clay
nanocomposites using composite theories. Polymer, 44(17): 4993–5013.
87. Incarnato, L., Scarfato, P., Scatteia, L. and Acierno D. (2004). Rheological
behavior of new melt compounded copolyamide nanocomposites. Polymer,
45(10): 3487–3496.
88. Yuan, M. and Turng, L. (2005). Microstructure and mechanical properties of
microcellular injection molded polyamide-6 nanocomposites. Polymer, 46(18):
7273–7292.
89. Vlasveld, D. P. N., Groenewold, J., Bersee, H. E. N. and Picken, S. J. (2005).
Moisture absorption in polyamide-6 silicate nanocomposites and its influence on
the mechanical properties, Polymer, 46(12): 12567–12576.
90. Lim, S., Dasari, A., Yu, Z., Mai, Y., Liu, S. and Yong, M. S. (2007). Fracture
toughness of nylon 6/organoclay/elastomer nanocomposites, Composites Science
and Technology, 67(14): 2914–2923.
91. Chung, H. and Das, S. (2008). Functionally graded Nylon-11/silica
nanocomposites produced by selective laser sintering. Materials Science and
Engineering A, 487(1-2): 251–257.
92. Gupta, R. K. and Bhattacharya, S. N. (2008). Polymer-clay nanocomposites:
current status and challenges. Indian Chemical Engineer, 50(3): 242-267
180
93. Mittal, V. (2007). Polypropylene-layered silicate nanocomposites: filler matrix
interactions and mechanical properties. Journal of Thermoplastic Composite
Materials, 20(6): 575- 599.
94. Dadfar, S. M. A., Alemzadeh, I., Dadfar, S. M. R. and Vosoughi, M. (2011).
Studies on the oxygen barrier and mechanical properties of low density
polyethylene/organoclay nanocomposite films in the presence of ethylene vinyl
acetate copolymer as a new type of compatibilizer. Materials and Design, 32(4):
1806–1813.
95. Lotti, C., Isaac, C. S., Branciforti, M. C., Alves, R. M. V., Liberman, S. and
Bretas, R. E. S. (2008). Rheological, mechanical and transport properties of blown
films of high density polyethylene nanocomposites, European Polymer Journal,
44(5): 1346–1357
96. Morawiec, J., Pawlak, A., Slouf, M., Galeski, A., Piorkowska, E. and Krasnikowa,
N. (2005). Preparation and properties of compatibilized LDPE/organo-modified
montmorillonite nanocomposites. European Polymer Journal, 41(5): 1115–1122.
97. Dong, Y. and Bhattacharyya, D. (2008). Effects of clay type, clay/compatibiliser
content and matrix viscosity on the mechanical properties of
polypropylene/organoclay nanocomposites. Composites Part A: Applied Science
and Manufacturing, 39(7): 1177–1191.
98. Villaluenga, J.P.G., Khayet, M., Lo´pez-Manchado, M. A., Valentin, J. L.,
Seoane, B. and Mengual, J. I. (2007). Gas transport properties of
polypropylene/clay composite membranes, European Polymer Journal, 43(4):
1132–1143.
99. Frounchi, M., Dadbin, S., Salehpour, Z. and Noferesti, M. (2006). Gas barrier
properties of PP/EPDM blend nanocomposites. Journal of Membrane Science,
282(1-2): 142–148.
100. Zhu, W., Zhang G., Yu, J. and Dai, G. (2004). Crystallization behavior and
mechanical properties of polypropylene copolymer by in situ copolymerization
with a nucleating agent and/or nano-calcium carbonate. Journal of Applied
Polymer Science, 91(1): 431–438.
101. Yang, K., Yang, Q., Li, G., Sun, Y. and Feng, D. (2006). Morphology and
mechanical properties of polypropylene/calcium carbonate nanocomposites.
Materials Letters, 60(6): 805–809.
181
102. Lin, Y., Chen, H., Chan, C. and Wu, J. (2010). The toughening mechanism of
polypropylene/calcium carbonate nanocomposites. Polymer, 51(14): 3277-3284.
103. Gong, G., Wu, J., Lin, Y., Chan, C. and Yang, M. (2009). Dynamic rheological
behavior of isotactic polypropylene filled with nano-calcium carbonate modified
by stearic acid coating. Journal of Macromolecular Science, Part B, 48(2): 329 —
343.
104. Sahebian, S., Zebarjad, S. M., Sajjadi, S. A., Sherafat, Z. and Lazzeri, A. (2007).
Effect of both uncoated and coated calcium carbonate on fracture toughness of
HDPE/CaCO3 nanocomposites. Journal of Applied Polymer Science, 104(6):
3688–3694.
105. Wang, W., Zeng, X., Wang, G. and Chen, J. (2007). Preparation and
characterization of calcium carbonate/ low-density-polyethylene nanocomposites.
Journal of Applied Polymer Science, 106(3): 1932–1938.
106. Chen, J. H., Rong, M. Z., Ruan, W. H. and Zhang, M. Q. (2009). Interfacial
enhancement of nano-SiO2/polypropylene composites. Composites Science and
Technology, 69(2): 252–259.
107. Kalaitzidou, K., Fukushima, H. and Drzal, L. T. (2007). Mechanical properties
and morphological characterization of exfoliated graphite–polypropylene
nanocomposites. Composites Part A: Applied Science and Manufacturing, 38(7):
1675–1682.
108. Zhou, Z., Wang, S., Lu, L., Zhang, Y. and Zhang Y. (2008). Functionalization of
multi-wall carbon nanotubes with silane and its reinforcement on polypropylene
composites. Composites Science and Technology, 68(7-8): 1727–1733.
109. Xu, D. and Wang, Z. (2008). Role of multi-wall carbon nanotube network in
composites to crystallization of isotactic polypropylene matrix. Polymer, 49(1):
330 – 338.
110. Awad, W. H., Beyer, G., Benderly, D., Ijdo, W. L., Songtipya, P., Jimenez-Gasco,
M. M., Manias, E. and Wilkie, C. A. (2009). Material properties of nanoclay PVC
composites, Polymer, 50(8): 1857–1867.
111. Lepoittevin, B., Pantoustier, N., Devalckenaere, M., Alexandre, M., Calberg, C.,
Je´roˆme, R., Henrist, C., Ulmont, A. and Dubois. P. (2003). Polymer/layered
silicate nanocomposites by combined intercalative polymerization and melt
intercalation: a masterbatch process. Polymer, 44(7): 2033–2040.
182
112. Patil, C. B., Kapadi, U. R., Hundiwale, D. G. and Mahulikar, P. P. (2009).
Preparation and characterization of poly(vinyl chloride) calcium carbonate
nanocomposites via melt intercalation. Journal of Material Science, 44(12): 3118–
3124.
113. Xie, X., Liu, Q., Li, R. K., Zhou, X., Zhang, Q., Yu, Z. and Mai, Y. (2004).
Rheological and mechanical properties of PVC/CaCO3 nanocomposites prepared
by in situ polymerization. Polymer, 45(19): 6665–6673.
114. Zhang, L., Chen, X. and Li, C. (2005). Mechanical properties of PVC/nano-
CaCO3 composites. Journal of Material Science, 40(8): 2097 – 2098.
115. Sohn, J.-I., Lee, C. H., Lim, S. T., Kim, T. H., Choi, H. J. and Jhon, M. S. (2003).
Viscoelasticity and relaxation characteristics of polystyrene/clay nanocomposite,
Journal of Material Science, 38(9): 1849 – 1852.
116. Dazhu, C., Haiyang, Y., Pingsheng, H. and Weian, Z. (2005). Rheological and
extrusion behavior of intercalated high-impact polystyrene/organomontmorillonite
nanocomposites. Composites Science and Technology, 65(10): 1593–1600.
117. Akat, H., Tasdelen, M. A., Prez, F. D. and Yagci, Y. (2008). Synthesis and
characterization of polymer/clay nanocomposites by intercalated chain transfer
agent. European Polymer Journal, 44(7): 1949–1954.
118. Thomas, P. S., Thomas, S., Bandyopadhyay, S., Wurm, A. and Schick, C. (2008).
Polystyrene/calcium phosphate nanocomposites: dynamic mechanical and
differential scanning calorimetric studies. Composites Science and Technology,
68(15-16): 3220–3229.
119. Lu, M., Zhou, W. and Mai K. (2006). Effect of nano-CaCO3 on polymorphic
behavior in syndiotactic polystyrene for non-isothermal crystallization. Polymer,
47(5): 1661-1666.
120. Yu, J., Lu, K., Sourty, E., Grossiord, N., Koning, C. E. and Loos, J. (2007).
Characterization of conductive multiwall carbon nanotube/polystyrene composites
prepared by latex technology.Carbon. 45(15): 2897–2903.
121. Pramanik, M., Srivastava, S. K., Samantaray, B. K. and Bhowmick, A. K.
(2003). EVA/clay nanocomposite by solution blending: effect of aluminosilicate
layers on mechanical and thermal properties. Macromolecular Research, 11(4):
260-266.
183
122. Gupta, R. K., Pasanovic-Zujo, V. and Bhattacharya, S.N. (2005). Shear and
extensional rheology of EVA/layered silicate-nanocomposites. Journal of Non-
Newtonian Fluid Mechanics, 128(2-3): 116–125.
123. Kim, B. K., Seo, J. W. and Jeong, H. M. (2003). Morphology and properties of
waterborne polyurethane/clay nanocomposites. European Polymer Journal, 39(1):
85–91.
124. Koerner, H., Liu, W., Alexander, M., Mirau, P., Dowty, H. and Vaia, R. A.
(2005). Deformation–morphology correlations in electrically conductive carbon
nanotube—thermoplastic polyurethane nanocomposites. Polymer, 46(12): 4405–
4420.
125. Ton-That, M.-T., Ngo, T.-D., Ding, P., Fang, G., Cole, K. C. and Hoa, S. V.
(2004). Epoxy nanocomposites: analysis and kinetics of cure. Polymer
Engineering and Science, 44(6):1132–1141.
126. Mohan, T. P., Ramesh Kumar, M. and Velmurugan, R. (2006). Mechanical and
barrier properties of epoxy polymer filled with nanolayered silicate clay particles.
Journal of Material Science, 41(6): 2929–2937.
127. Mascia, L., Prezzi, L. and Haworth, B. (2006). Substantiating the role of phase
bicontinuity and interfacial bonding in epoxy-silica nanocomposites. Journal of
Material Science, 41(4): 1145–1155.
128. Fang, Z., Shi, H., Gu, A. and Feng, Y. (2007). Effect of bentonite on the structure
and mechanical properties of CE/CTBN system, Journal of Material Science,
42(12): 4603–4608.
129. Lucignano, C., Quadrini, F.and Santo, L. (2008). Dynamic mechanical
performances of polyester clay nanocomposite thick films. Journal of Composite
Materials, 42(26): 2841-2852.
130. Kim, Y. H. and Kim, D. S. (2009). Physical properties of polyester-acrylate/clay
nanocomposite films with different organoclays. Polymer Composites, 30(7):
926–931.
131. Maji, P. K., Guchhait, P. K. and Bhowmick, A. K. (2009). Effect of nanoclays on
physico-mechanical properties and adhesion of polyester-based polyurethane
nanocomposites: structure–property correlations. Journal of Material Science,
44(21): 5861–5871.
184
132. Maji, P. K., Das, N. K. and Bhowmick, A. K. (2010). Preparation and properties
of polyurethane nanocomposites of novel architecture as advanced barrier
materials. Polymer, 51(5): 1100–1110.
133. Mishra, S., Sonawane, S. and Chitodkar, V. (2005). Comparative study on
improvement in mechanical and flame retarding properties of epoxy-CaCO3 nano
and commercial composites. Polymer-Plastics Technology and Engineering,
44(3): 463 — 473.
134. Jin, F. and Park, S. (2008). Interfacial toughness properties of trifunctional epoxy
resins/calcium carbonate nanocomposites. Materials Science and Engineering A,
475(1-2): 190–193.
135. Jain, R., Narula, A. K. and Choudhary, V. (2009). Studies on epoxy/calcium
carbonate nanocomposites. Journal of Applied Polymer Science, 114(4): 2161–
2168.
136. Choi, W. J., Powell, R. L. and Kim, D. S. (2009). Curing behavior and properties
of epoxy nanocomposites with amine functionalized multiwall carbon nanotubes.
Polymer Composites, 30(4): 415–421.
137. Herna´ndez-Pe´rez, A., Avile´s, F., May-Pat, A., Valadez-Gonza´lez, A., Herrera-
Franco, P. J. and Bartolo-Pe´rez, P. (2008). Effective properties of multiwalled
carbon nanotube/epoxy, composites using two different tubes. Composites Science
and Technology, 68(6): 1422–1431.
138. Wang, Q., Dai, J., Li, W., Wei, Z. and Jiang, J. (2008). The effects of CNT
alignment on electrical conductivity and mechanical properties of SWNT/epoxy
nanocomposites. Composites Science and Technology, 68(7-8): 1644–1648.
139. Chen, W., Lu, H. and Nutt, S. R. (2008). The influence of functionalized MWCNT
reinforcement on the thermomechanical properties and morphology of epoxy
nanocomposites. Composites Science and Technology, 68(12): 2535-2542.
140. Yeh, M., Tai, N. and Lin, Y. (2008). Mechanical properties of phenolic-based
nanocomposites reinforced by multi-walled carbon nanotubes and carbon fibers.
Composites Part A: Applied Science and Manufacturing, 39(4): 677–684.
141. Wu, Y., Jia, Q., Yu, D. and Zhang, L. (2004). Modeling Young’s modulus of
rubber–clay nanocomposites using composite theories. Polymer Testing, 23(8):
903–909.
185
142. Okada, A., Fukumori, A., Usuki, A., Kojima, Y., Kuruachi, T. and Kamigaito, O.
(1991). Rubber-clay hybrid synthesis and properties. Polymer Chemistry, 32(2):
540 – 541.
143. Y. Kojima, K. Fukumori, A. Usuki, A. Okada and T. Kurauchi (1993). Gas
permeabilities in rubber-clay hybrid. Journal of Materials Science Letters,
12(12):889–890.
144. Varghese, S., Karger-Kocsis, J. and Gatos, K.G. (2003). Melt compounded
epoxidized natural rubber/layered silicate nanocomposites: structure-properties
relationships. Polymer, 44(14): 3977–3983.
145. Varghese, S. and Karger-Kocsis, J. (2003). Natural rubber-based nanocomposites
by latex compounding with layered silicates. Polymer, 44(17): 4921–4927.
146. Varghese, S. and Karger-Kocsis, J. (2004). Melt-compounded natural rubber
nanocomposites with pristine and organophilic layered silicates of natural and
synthetic origin. Journal of Applied Polymer Science, 91(2): 813–819.
147. Khanlari, S. and Kokabi, M. (2011). Thermal stability, aging properties, and flame
resistance of NR-based nanocomposite. Journal of Applied Polymer Science,
119(2): 855–862.
148. Azlina, H. N., Sahrim, H. A. and Rozaidi, R. (2011). Effect of nanoclay on the
microstructure and the properties of thermoplastic natural rubber (TPNR)/OMMT
nanocomposites, Journal of Thermoplastic Composite Materials, Published online
before print June 13, doi: 10.1177/0892705711408987.
149. Arroyo, M., Lo´pez-Manchado, M. A. and Herrero, B. (2003). Organo-
montmorillonite as substitute of carbon black in natural rubber compounds.
Polymer, 44(8): 2447–2453.
150. Carli, L. N., Roncato, C. R., Zanchet, A., Mauler, R. S., Giovanela, M., Brandalise
R. N. and Crespo, J. S. (2011). Characterization of natural rubber nanocomposites
filled with organoclay as a substitute for silica obtained by the conventional two-
roll mill method. Applied Clay Science, 52(1-2) : 56-61.
151. Jacob, A., Kurian, P. and Aprem, A. S. (2007). Cure characteristics and
mechanical properties of natural rubber-layered clay nanocomposites.
International Journal of Polymeric Materials, 56(6): 593 — 604.
152. Jeon, H. U., Lee, D. H., Choi, D., Kim, M. S., Kim, J. H. and Jeong, H. M. (2007).
Characteristics of rubber/sodium montmorillonite nanocomposites prepared by a
novel method. Journal of Macromolecular Science, Part B, 46(6): 1151 — 1163.
186
153. Avalos, F., Ortiz, J., Zitzumbo, R., Lo´pez-Manchado, M. A., Verdejo, R. and
Arroyo, M. (2008.) Effect of montmorillonite intercalant structure on the cure
parameters of natural rubber. European Polymer Journal, 44(10): 3108–3115.
154. Stephen, R., Varghese, S., Joseph, K., Oommen, Z. and Thomas, S. (2006).
Diffusion and transport through nanocomposites of natural rubber (NR),
carboxylated styrene butadiene rubber (XSBR) and their blends. Journal of
Membrane Science, 282(1-2): 162–170.
155. Stephen, R., Ranganathaiah, C., Varghese, S., Joseph, K. and Thomas, S. (2006).
Gas transport through nano and micro composites of natural rubber (NR) and their
blends with carboxylated styrene butadiene rubber (XSBR). Polymer, 47(3): 858–
870.
156. Jiamjitsiripong, K. and Pattamaprom, C. (2011). Effects of epoxidized natural
rubber on gas barrier and mechanical properties of NR/BIIR composites. Journal
of Elastomers and Plastics, Published online before print March 14, 2011, doi:
10.1177/0095244311400502.
157. Ikeda, Y., Poompradub, S., Morita, Y. and Kohjiya, S. (2008). Preparation of high
performance nanocomposite elastomer: effect of reaction conditions on in situ
silica generation of high content in natural rubber. Journal of Sol-Gel Science and
Technology, 45(3): 299–306.
158. Peng, C., Kong, L. X., Li, S., Chen, Y. and Huang, M. F. (2007). Self-assembled
natural rubber/silica nanocomposites: Its preparation and characterization.
Composites Science and Technology, 67(15-16): 3130–3139.
159. Lorenz, H., Fritzsche, J., Das, A., Stöckelhuber, K. W., Jurk, R., Heinrich, G. and
Klüppel, M. (2009). Advanced elastomer nano-composites based on CNT-hybrid
filler systems. Composites Science and Technology, 69(13): 2135–2143.
160. Atieh, M. A., Girun, N., Mahdi, E., Tahir, H., Guan, C. T., Alkhatib, M. F.,
Ahmadun, F. and Baik, D. R. (2006). Effect of multi-wall carbon nanotubes on the
mechanical properties of natural rubber, fullerenes. Nanotubes and Carbon
Nanostructures, 14(4): 641 — 649.
161. Tarawneh, M. A., Ahmad, S. H., Rasid, R., Yahya, S.Y., Lau, K., Kong, I., Noum,
S. Y. E. (2011). Thermal behavior of MWNT-reinforced thermoplastic natural
rubber nanocomposites. Journal of Reinforced Plastics and Composites, 30(3):
216-221.
187
162. Jiang, M., Dang, Z., Yao, S. and Bai, J. (2008). Effects of surface modification of
carbon nanotubes on the microstructure and electrical properties of carbon
nanotubes/rubber nanocomposites. Chemical Physics Letters, 457(4-6): 352–356.
163. Morton, M. (1999). Rubber Technology, 3rd edition, Kluver Academic Publishers,
Dordrecht.
164. Hofmann, W. (1989). Rubber Technology Handbook, Hanser Gardner
Publications, Dordrecht.
165. Kim, J., Oh, T. and Lee, D. (2003). Preparation and characteristics of nitrile
rubber (NBR) nanocomposites based on organophilic layered clay. Polymer
International, 52(7): 1058-1063.
166. Kim, J., Oh, T. and Lee, D. (2003). Morphology and rheological properties of
nanocomposites based on nitrile rubber and organophilic layered silicates.
Polymer International, 52(7): 1203 – 1208.
167. Kader, M. A., Kim, K., Lee, Y.-S. and Nah, C. (2006). Preparation and properties
of nitrile rubber/montmorillonite nanocomposites via latex blending. Journal of
Material Science, 41(22): 7341–7352.
168. Wu, Y., Jia, Q., Yu, D. and Zhang, L. (2003). Structure and Properties of nitrile
rubber (NBR)–clay nanocomposites by co-coagulating NBR latex and clay
aqueous suspension. Journal of Applied Polymer Science, 89(14): 3855–3858.
169. Yu, Y., Gu, Z., Song, G., Li, P., Li, H. and Liu, W. (2011). Structure and
properties of organo-montmorillonite/nitrile butadiene rubber nanocomposites
prepared from latex dispersions. Applied Clay Science, 52(4): 381-385
170. Hwang, W., Wei, K. and Wu, C. (2004). Preparation and mechanical properties of
nitrile butadiene rubber/silicate nanocomposites. Polymer, 45(16): 5729–5734.
171. Hwang, W., Wei, K. and Wu, C. (2004). Mechanical, thermal, and barrier
properties of NBR/organosilicate nanocomposites. Polymer Engineering and
Science, 44(11): 2117–2124.
172. Sadhu, S. and Bhowmick, A. K. (2004). Preparation and properties of
nanocomposites based on acrylonitrile–butadiene rubber, styrene–butadiene
rubber, and polybutadiene rubber. Journal of Polymer Science Part B: Polymer
Physics, 42(9): 1573–1585.
173. Sadhu, S. and Bhowmick, A. K. (2005). Morphology study of rubber based
nanocomposites by transmission electron microscopy and atomic force
microscopy. Journal of Material Science, 40(7): 1633 – 1642.
188
174. Sadhu, S. and Bhowmick, A. K. (2005). Unique rheological behavior of rubber
based nanocomposites. Journal of Polymer Science Part B: Polymer Physics,
43(14): 1854–1864.
175. Nah, C., Ryu, H.J., Kim, W.D. and Chang, Y.W. (2003). Preparation and
properties of acrylonitrile–butadiene copolymer hybrid nanocomposites with
organoclays. Polymer International, 52(8): 1359-1364.
176. Chung, J. W., Han, S. J. and Kwak, S. (2009). Application of strain–time
correspondence as a tool for structural analysis of acrylonitrile–butadiene
copolymer nanocomposites with various organoclay loadings. European Polymer
Journal, 45(1): 79–87.
177. Soares, B. G., Oliveira, M., Zaioncz, S., Gomes, A. C. O., Silva, A. A., Santos,
K. S. and Mauler, R. S. (2011). Nitrile rubber/organomontmorillonite
nanocomposites produced by solution and melt compounding: effect of the
polarity of the quaternary ammonium intercalants. Journal of Applied Polymer
Science, 119(1): 505–514.
178. Chung, J. W., Han, S. J. and Kwak, S. (2008). Dynamic viscoelastic behavior and
molecular mobility of acrylonitrile–butadiene copolymer nanocomposites with
various organoclay loadings. Composites Science and Technology, 68(6): 1555–
1561.
179. Thomas, P.C., Tomlal Jose, E., Selvin, T. P., Thomas, S. and Joseph, K. (2010).
High-performance nanocomposites based on arcylonitrile-butadiene rubber with
fillers of different particle size: mechanical and morphological studies. Polymer
Composites, 31(9): 1515–1524.
180. Das, A., Jurk, R., Stöckelhuber, K. W. and Heinrich, G. (2007). Rubber curing
chemistry governing the orientation of layered silicate. eXPRESS Polymer Letters,
1(11): 717–723.
181. Kim, J., Lee, D., Oh, T. and Lee, D. (2003). Characteristics of nitrile–butadiene
rubber layered silicate nanocomposites with silane coupling agent. Journal of
Applied Polymer Science, 89(10): 2633–2640.
182. Rajasekar, R., Pal, K., Heinrich G., Das, A. and Das, C. K. (2009). Development
of nitrile butadiene rubber–nanoclay composites with epoxidized natural rubber as
compatibilizer. Materials and Design, 30(9): 3839–3845.
183. Janowska, G., Kucharska-Jastrząbek A. and Rybiński, P. (2011). Thermal
stability, flammability and fire hazard of butadiene-acrylonitrile rubber
189
nanocomposites. Journal of Thermal Analysis and Calorimetry, 103(3): 1039-
1046.
184. Schutzius, T. M., Tiwari, M. K., Bayer, I. S. and Megaridis, C. M. (2011). High
strain sustaining, nitrile rubber based, large-area, superhydrophobic,
nanostructured composite coatings. Composites Part A: Applied Science and
Manufacturing, 42(8): 979-985.
185. Verge, P., Peeterbroeck, S., Bonnaud, L. and Dubois, P. (2010). Investigation on
the dispersion of carbon nanotubes in nitrile butadiene rubber: role of polymer-to-
filler grafting reaction. Composites Science and Technology, 70(10): 1453-1459.
186. Likozar, B. and Major, Z. (2010). Morphology, mechanical, cross-linking,
thermal, and tribological properties of nitrile and hydrogenated nitrile
rubber/multi-walled carbon nanotubes. Applied Surface Science, 257(2): 565–573.
187. Lapa, V. L. C., Suarez, J. C. M., Visconte, L. L. Y. and Nunes, R. C. R. (2007).
Fracture behavior of nitrile rubber-cellulose II nanocomposites. Journal of
Material Science, 42(24): 9934–9939.
188. Choudhury, A., Bhowmick, A. K. and Soddemann, M. (2010). Effect of organo-
modified clay on accelerated aging resistance of hydrogenated nitrile rubber
nanocomposites and their life time prediction. Polymer Degradation and Stability,
95(12): 2555 – 2562.
189. Gatos, K. G. and Karger-Kocsis, J. (2007). Effect of the aspect ratio of silicate
platelets on the mechanical and barrier properties of hydrogenated acrylonitrile
butadiene rubber (HNBR)/layered silicate nanocomposites. European Polymer
Journal, 43(4): 1097–1104.
190. Guan, Y., Zhang, L., Zhang, L. and Lu, Y. (2011). Study on ablative properties
and mechanisms of hydrogenated nitrile butadiene rubber (HNBR) composites
containing different fillers. Polymer Degradation and Stability, 96(5): 808-817.
191. Liu, Q., Ren, W., Zhang, Y. and Zhang, Y. (2011). Hydrogenated carboxylated
nitrile rubber/modified zinc carbonate basic composites with photoluminescence
properties. European Polymer Journal, 47(5): 1135-1141.
192. Le, H. H., Ali, Z., Ilisch, S.and Radusch, H.-J. (2010). Time-dependent
reinforcement effect of nanoclay in rubber nanocomposites. Journal of Materials
Science, 46(6): 1685-1696.
190
193. Zhang, L., Wang, Y., Wang, Y., Sui, Y. and Yu, D. (2000). Morphology and
mechanical properties of clay/styrene- butadiene rubber nanocomposites. Journal
of Applied Polymer Science, 78(11): 1873–1878.
194. Zhang, Z., Zhang, L., Li, Y. and Xu, H. (2005). New fabricate of styrene–
butadiene rubber/montmorillonite nanocomposites by anionic polymerization.
Polymer, 46(1): 129–136.
195. Chakraborty, S., Kar, S., Dasgupta, S., Mukhopadhyay, R., Bandyopadhyay, S.,
Joshi, M. and Ameta, S. C. (2010). Study of the properties of in-situ sodium
activated and organomodified bentonite clay – SBR rubber nanocomposites – Part
I: characterization and rheometric properties. Polymer Testing, 29(2): 181–187.
196. Jia, Q., Wu, Y., Wang, Y., Lu, M. and Zhang, L. (2008). Enhanced interfacial
interaction of rubber/clay nanocomposites by a novel two-step method.
Composites Science and Technology, 68(3-4): 1050–1056.
197. Bhattacharya, M., Maiti, M. and Bhowmick, A. K. (2009). Tailoring properties of
styrene butadiene rubber nanocomposite by various nanofillers and their
dispersion. Polymer Engineering and Science, 49(1): 81–98.
198. Praveen, S., Chattopadhyay, P. K., Albert, P., Dalvi, V. G., Chakraborty B. C. and
Chattopadhyay, S. (2009). Synergistic effect of carbon black and nanoclay fillers
in styrene butadiene rubber matrix: Development of dual structure, Composites
Part A: Applied Science and Manufacturing, 40(3): 309–316.
199. Mishra, S. and Shimpi, N. G. (2005). Comparison of nano CaCO3 and fly ash
filled with stryrene butadiene on mechanical and thermal properties. Journal of
Scientific and Industrial Research, 64(10): 744-751.
200. Mishra, S., Shimpi, N. G. and Patil, U. D. (2007). Effect of nano CaCO3 on
thermal properties of styrene butadiene rubber (SBR). Journal of Polymer
Research, 14(6): 449–459.
201. Atieh, M. A. (2011). Effect of functionalized carbon nanotubes with amine
functional group on the mechanical and thermal properties of styrene butadiene
rubber. Journal of Thermoplastic Composite Materials, Published online before
print February 23, 2011, doi: 10.1177/0892705710397456.
202. Zhou, X., Zhu, Y., Liang, J. and Yu, S. (2010). New fabrication and mechanical
properties of styrene-butadiene rubber/carbon nanotubes nanocomposite. Journal
of Materials Sciences and Technology, 26(12): 1127-1132.
191
203. Tian, M., Cheng, L., Liang, W. and Zhang, L. (2006). Overall properties of
fibrillar silicate/styrene–butadiene rubber nanocomposites. Journal of Applied
Polymer Science 101(5): 2725–2731.
204. Jincheng, W., Xiaoyu, Z., Yuehui, C., Zhijun, L.and Zengliang, Z. (2009).
Properties and mechanism research on polybutadiene styrene rubber (SBR)
composites containing nano-BaSO4. Journal of Elastomers and Plastics, 41(3):
263 – 276.
205. Chang, Y., Yang, Y., Ryu, S.and Nah, C. (2002). Preparation and properties of
EPDM/ organomontmorillonite hybrid nanocomposites. Polymer International,
51(4): 319-324.
206. Acharya, H. and Srivastava, S. K. (2006). Influence of nanodispersed organoclay
on rheological and swelling properties of ethylene propylene diene terpolymer.
Macromolecular Research, 14(2): 132-139.
207. Li, P., Yin, L., Song, G., Sun, J., Wang, L. and Wang, H. (2008). High-
performance EPDM/organoclay nanocomposites by melt extrusion. Applied Clay
Science, 40(1-4): 38–44.
208. Acharya, H., Pramanik, M., Srivastava, S. K. and Bhowmick, A. K. (2004).
Synthesis and evaluation of high-performance ethylene– propylene–diene
terpolymer/organoclay nanoscale composites. Journal of Applied Polymer
Science, 93(5): 2429–2436.
209. Zheng, H., Zhang, Y., Peng, Z. and Zhang, Y. (2004). Influence of clay
modification on the structure and mechanical properties of
EPDM/montmorillonite nanocomposites. Polymer Testing, 23(2): 217–223.
210. Gatos, K. G. and Karger-Kocsis, J. (2005). Effects of primary and quaternary
amine intercalants on the organoclay dispersion in a sulfur-cured EPDM rubber.
Polymer, 46(9): 3069–3076.
211. Ahmadi, S. J., Yudong, H. and Li, W. (2004). Synthesis of EPDM/organoclay
nanocomposites: effect of the clay exfoliation on structure and physical properties.
Iranian Polymer Journal, 13(5): 415-422.
212. Mohammadpour, Y. and Katbab, A. A. (2011). Effects of the compatibilizer
structural parameters on microstructural formation in ethylene–propylene–diene
monomer rubber/ethylene–propylene–diene monomer rubber-g-maleic
anhydride/organoclay nanocomposites. Journal of Applied Polymer Science,
120(6): 3133–3140.
192
213. Su, L., Zhang, L., Yin, S. and Tian, M. (2011). Structure and mechanical
properties of nanodispersed fibrous silicate-reinforced ethylene–propylene–diene
monomer nanocomposites. Journal of Applied Polymer Science, 120(4): 1926–
1933.
214. Ismail, H. and Shaari, S. M. (2010). Curing characteristics, tensile properties and
morphology of palm ash/halloysite nanotubes/ethylene-propylene-diene monomer
(EPDM) hybrid composites. Polymer Testing, 29(7): 872-878.
215. Zhou, Y., Wang, S., Zhang, Y. and Zhang, Y. (2006). Reinforcement effect of
MAA on nano-CaCO3-filled EPDM vulcanizates and possible mechanism.
Journal of Polymer Science Part B: Polymer Physics, 44(8): 1226–1236.
216. Das, A., Costa, F. R., Wagenknecht, U. and Heinrich, G. (2008). Nanocomposites
based on chloroprene rubber: Effect of chemical nature and organic modification
of nanoclay on the vulcanizate properties. European Polymer Journal, 44(11):
3456–3465.
217. Mohomane, M., Djokovic, V., Thomas, S. and Luyt, A. S. (2011).
Polychloroprene nanocomposites filled with different organically modified clays:
Morphology, thermal degradation and stress relaxation behaviour. Polymer
Testing, 30(5): 585-593.
218. Maiti, M. and Bhowmick, A. K. (2007). Dynamic viscoelastic properties of
fluoroelastomer/ clay nanocomposites. Polymer Engineering and Science, 47(11):
1777–1787.
219. Simon, M. W., Stafford, K. T. and Ou, D. L. (2008). Nanoclay reinforcement of
liquid silicone rubber, Journal of Inorganic and Organometallic Polymers and
Materials. 18(3): 364–373.
220. Wang, J., Chen, Y. and Jin, Q. (2006). Preparation and characteristics of a novel
silicone rubber nanocomposite based on organophilic montmorillonite. High
Performance Polymers, 18(3): 325–340.
221. Gacitua, W. E., Ballerini, A. A. and Zhang, J. (2005). Polymer nanocomposites:
synthetic and natural fillers: a review. Maderas Ciencia y tecnologia, 7(3): 159–
178.
222. Feeney, C.A., Goldberg, H.A., Farrell, M., Karim, D. P. and Oree K. R. (2006).
Barrier coating of a non-butyl elastomer and a dispersed layered filler in a liquid
carrier and coated articles. US Patent 10741251, to InMat Inc., Hillsborough, US.
193
223. Ou, Y. C., Yu, Z. Z., Vidal, A., and Donnet, J. B. (1996). Effects of alkylation of
silicas on interfacial interaction and molecular motions between silicas and
rubbers. Journal of Applied Polymer Science, 59(8):1321–1325.
224. Wang, M., Kutsovsky, Y., Reznek, S.R., and Mahmud, K. (2002). Elastomeric
compounds with improved wet skid resistance and methods to improve wet skid
resistance. US Patent 6469089, to Cabot Corp.
225. Kresge, E.N. and Lohse, D.J. (1996). Composite tire innerliners and inner tubes.
US Patent US5576372 to Exxon Chemical Patents Inc., USA
226. Usuki, A., Tukigase, A., and Kato, M. (2002). Preparation and properties of
EPDM-clay hybrids. Polymer, 43(8): 2185–2189.
227. http://www.rapra.net/research/past-projects/nanorub.asp. Accessed 18 June 2011.
228. Liff, S. M., Kumar N. and McKinley, G. H. (2007). High-performance elastomeric
nanocomposites via solvent-exchange processing. Nature Materials, 6(1): 76 – 83.
229. Yang, J., Tian, M., Jia, Q.-X., Shi, J.-H. Zhang, L-Q., Lim, S-H., Yu, Z-Z. and
Mai, Y-W. (2007). Improved mechanical and functional properties of
elastomer/graphite nanocomposites. Acta Materialia, 55(18): 6372–6382.
230. Karger-Kocsis, J. (2006). Dry friction and sliding behavior of organoclay
reinforced thermoplastic polyurethane rubbers. Kautschuk Gummi Kunststoffe,
59(10): 537–543.
231. Anmin, H., Xiaoping,W., Demin, J., and Yanmei, L. (2007). Thermal stability and
aging characteristics of HNBR/ clay nanocomposites in air, water and oil at
elevated temperature. e-Polymers, 051(2007).
232. Claus, R.O., Zeng, T., and Liu, Y. (2002). Electrostrictive and piezoelectric thin
film assemblies and method of fabrication therefore. US Patent 6447887 to
Virginia Tech Intellectual Properties Inc., USA
233. Webb, A. R., Kumar V. A. and Ameer, G. A. (2007). Biodegradable poly(diol
citrate) nanocomposite elastomers for soft tissue engineering. Journal of Materials
Chemistry, 17(9): 900-906.
234. http://spie.org/documents/Newsroom/Imported/003518/003518_10.pdf. Accessed
18 June 2011.
235. Antimicrobial Rubber Technology (2008). http://www.milliken2.com. Accessed
18 June 2011.
194
236. Valavala P. K. and Odegard, G. M. (2005). Modeling techniques for
determination of mechanical properties of polymer nanocomposites. Reviews on
Advanced Materials Science, 9(1): 34-44.
237. Fuchs, C., Bhattacharyya, D.and Fakirov, S. (2005). Microfibril reinforced
polymer–polymer composites: Application of Tsai-Hill equation to PP/PET
composites. Composites Science and Technology, 66(16): 3161-3171.
238. Jayanarayanan, K., Thomas, S. and Joseph, K. (2008). Morphology, static and
dynamic mechanical properties of in situ microfibrillar composites based on
polypropylene/poly (ethylene terephthalate) blends. Composites Part A: Applied
Science and Manufacturing, 39(2): 164–175.
239. Fisher, F. T. and Brinson, L. C. Nanomechanics of nanoreinforced polymers. In:
Rieth, M. and Schommers, W., Editors. (2006). Handbook of theoretical and
computational nanoscience, American Scientific Publishers, California, 253–360.
240. Kalaitzidou, K., Fukushima, H., Miyagawa, H. and Drzal, L.T. (2007). Flexural
and tensile moduli of polypropylene nanocomposites and comparison of
experimental data to Halpin-Tsai and Tandon-Weng models. Polymer
Engineering and Science, 47(11): 1796–1803.
241. Yung, K. C., Wang, J. and Yue, T. M. (2006). Modeling Young’s modulus of
polymer-layered silicate nanocomposites using a modified Halpin–Tsai
micromechanical model. Journal of Reinforced Plastics and Composites, 25(8):
847–861.
242. Liu, H. and Brinson, L. C. (2008). Reinforcing efficiency of nanoparticles: A
simple comparison for polymer nanocomposites. Composites Science and
Technology, 68(6): 1502-1512.
243. Shia, D., Hui, C.Y., Burnside, S. D. and Giannelis, E. P. (1998). An interface
model for the prediction of Young’s modulus of layered siiicate-elastomer
nanocomposites. Polymer Composites, 19(5): 608 – 617.
244. Chen, J., Wang, G., Yu, Z., Huang, Z. and Mai, Y. (2010). Critical particle size
for interfacial debonding in polymer/nanoparticle composites. Composites Science
and Technology, 70(5): 861–872.
245. Mallick, K. and Paul C. (2004). Elastic Parameters of Nanoclay-Reinforced
Polymers for Space and Launch Vehicles. Proceedings of Aerospace Conference,
2004 IEEE, 4: 2740 – 2744.
195
246. Brune, D.A. and Bicerano J. (2002). Micromechanics of nanocomposites:
comparison of tensile and compressive elastic moduli, and prediction of effects of
incomplete exfoliation and imperfect alignment on modulus. Polymer, 43(2):
369-387.
247. Suter, J. L., Coveney, P.V., Greenwell, H. C. and Thyveetil, M. A. (2007). Large-
scale molecular dynamics study of montmorillonite clay: emergence of undulatory
fluctuations and determination of material properties. Journal of Physical
Chemistry C, 111(23): 8248–8259.
248. Minisini, B. and Tsobnang, F. (2005). Molecular dynamics study of specific
interactions in grafted polypropylene organomodified clay nanocomposite.
Composites Part A: Applied Science and Manufacturing, 36(4): 539–544.
249. Zhu, R., Pan, E. and Roy, A. K. (2007). Molecular dynamics study of the stress-
strain behavior of carbonnanotube reinforced Epon 862 composites. Materials
Science and Engineering A, 447(1-2): 51-57.
250. Mokashi, V. V., Qian, D. and Liu, Y. J. (2007). A study on the tensile response
and fracture in carbon nanotube-based composites using molecular mechanics.
Composite Science and Technology, 67(3-4): 530–540.
251. Patel, R. R., Mohanraj, R. and, Pittman, C. U. (2006). Properties of polystyrene
and polymethyl methacrylate copolymers of polyhedral oligomeric
silsesquioxanes: a molecular dynamics study. Journal of Polymer Science Part B:
Polymer Physics, 44(1): 234–248.
252. Sen, T. Z., Sharaf, M. A., Mark, J. E. and Kloczkowski, A. (2005). Modeling the
elastomeric properties of stereoregular polypropylenes in nanocomposites with
spherical fillers. Polymer, 46(18): 7301–7308.
253. Dong, Y., Bhattacharyya, D. and Hunter, P.J. (2008). Experimental
characterisation and object-oriented finite element modelling of
polypropylene/organoclay nanocomposites. Composites Science and Technology,
68(14): 2864–2875.
254. Saadatfar, M., Afaghi Khatibi, A. and Mortazavi, B. (2011). Effective Parameters
on the stress–strain curve of nylon 66/clay nanocomposite using FEM. Strain,
47(s1): e442–e446.
255. Wan, H., Delale, F. and Shen, L. (2005). Effect of CNT length and CNT-matrix
interphase in carbon nanotube (CNT) reinforced composites. Mechanics Research
Communications, 32(5): 481-489.
196
256. Takahashi, S., Goldberg, H. A., Feeney, C. A., Karim, D. P., Farrell, M., O’Leary,
K. and Paul, D.R. (2006). Gas barrier properties of butyl rubber/vermiculite
nanocomposite coatings, Polymer, 47(9): 3083–3093.
257. Lape, N. K., Nuxoll, E. E. and Cussler, E. L. (2004). Polydisperse flakes in barrier
films. Journal of Membrane Science, 236(1-2): 29–37.
258. Gusev, A. A. and Lusti, H. R. (2001). Rational design of nanocomposites for
barrier applications. Advanced Materials, 13(21): 1641–1643.
259. Montgomery, D.C. (1996). Design and analysis of experiments, John Wiley, New
York.
260. Anderson, M. J and Whitcomb, P. J. (2004). RSM Simplified, Optimizing
Processes Using Response Surface Methods for Design of Experiments,
Productivity Press, New York.
261. Gunst, R.F., Mason, R. L. and James, L. H. (1989). Statistical design and analysis
of experiments with applications to engineering and science, John Wiley, New
York.
262. Cheremesinoff, N.P. (1990). Product design and testing of polymeric materials,
Marcel Dekker, New York, pp 438-511.
263. Derringer, G.C. (1990). Statistical methods in rubber research and development.
Rubber Chemistry and Technology, 61(3): 377-417.
264. Wu, C. F. J. and Hamad, M. (2000). Experiments planning, analysis and
parameter design optimization, John Wiley, New York.
265. Araujo, P.W. and Brereton RG. (1996). Experimental design II. Optimization.
Trends in Analytical Chemistry, 15(2): 63–70.
266. Bhagawan, S. S. Statistical Design in Polymer Processing. In: Gupta BR, Editor.
(2008). Polymer Processing Technology, Asian Books, New Delhi, 16.1-16.37.
267. Sridhar, V., Prasad, K., Choe, S. and Kundu, P. P. (2001). Optimization of
physical and mechanical properties of rubber compounds by a response surface
methodological approach . Journal of Applied Polymer Science, 82(4): 997–1005.
268. MINITAB software package, Statguide www.Minitab.com. Accessed 18 June
2011.
269. Box, G. E. P. and Draper N. R. (1987). Empirical model building and response
surfaces, John Wiley and Sons, New York.
197
270. Mittal, V. (2008). Modeling the behavior of polymer-layered silicate
nanocomposites using factorial and mixture designs. Journal of Thermoplastic
Composite Materials, 21(1): 9 – 26.
271. Mirmohseni, A. and Zavareh, S. (2010). Modeling and optimization of a new
impact-toughened epoxy nanocomposite using response surface methodology.
Journal of Polymer Research, 18(4): 509 - 517.
272. Chow, W. S. and Yap, Y. P. (2008). Optimization of process variables on flexural
properties of epoxy/organo-montmorillonite nanocomposite by response surface
methodology. eXPRESS Polymer Letters, 2(1): 2–11.
273. Cloisite and Nanofil Additives. http://www.nanoclay.com/keyproperties.asp.
Accessed 18 May 2011.
274. Ganter, M., Gronski, W., Reichert, P. and M¨ulhaupt, R. (2001). Rubber
nanocomposites: morphology and mechanical properties of BR and SBR
vulcanizates reinforced by organophilic layered silicates. Rubber Chemistry and
Technology, 74(2): 221– 235.
275. Mathew, G., Rhee, J.M., Lee, Y.S., Park, D.H. and Nah, C. (2008). Cure kinetics
of ethylene acrylate rubber/clay nanocomposites. Journal of Industrial and
Engineering Chemistry, 14(1): 60–65.
276. Dritis, V.A. and Tchoubar, C. (1990). X-Ray Diffraction by Disordered Lamellar
Structures, Springer- Verlag, New York.
277. Morgan, A.B. and Gilman, J.W. (2003). Characterization of polymer-layered
silicate (clay) nanocomposites by transmission electron microscopy and X-ray
diffraction: a comparative study. Journal of Applied Polymer Science, 87(8):
1329–1338.
278. Sheng, N., Boyce, M.C., Parks, D.M., Rutledge, G.C., Abes, J.I. and Cohen, R.E.
(2004). Multiscale micromechanical modeling of polymer/clay nanocomposites
and the effective clay particle. Polymer, 45(2): 487–506.
279. Bhattacharya, M. and Bhowmick, A.K. (2008). Polymer–Filler Interaction in
Nanocomposites: New Interface Area Function to Investigate Swelling Behavior
and Young’s Modulus. Polymer, 49(22): 4808–4818.
280. Moly, K.A., Bhagawan, S.S., Groeninckx, G. and Thomas, S. (2006). Correlation
between the morphology and dynamic mechanical properties of ethylene vinyl
acetate/linear low-density polyethylene blends: effects of the blend ratio and
compatibilization. Journal of Applied Polymer Science, 100(6): 4526–4538
198
281. Idicula, M., Malhotra, S. K., Joseph, K. and Thomas, S. (2005). Dynamic
mechanical analysis of randomly oriented intimately mixed short banana/sisal
hybrid fibre reinforced polyester composites. Composites Science and
Technology, 65(7-8): 1077 - 1087.
282. Maruyama, T. (1978). Dynamic Mechanical Analysis of Polymeric Materials, 2nd
Edition, Elsevier, Amsterdam.
283. Choi, J.S., Lim, S.T., Choi, H.J., Pozsgay, A., Sz´Azdi, L. and Pukanszky, B.
(2006). Viscoelastic properties of exfoliated polyamide-6/layered silicate
nanocomposite. Journal of Materials Science, 41(6): 1843-1846.
284. Manoj, K. C., Kumari, P., Rajesh, C. and Unnikrishnan, G. (2010). Aromatic
liquid transport through filled EPDM/NBR blends. Journal of Polymer Research,
17(1): 1-9.
285. Brydson, J. A. (1999). Plastics materials, Butterworth-Heinemann, Oxford.
286. Moly, K. A., Bhagawan, S. S., George, S. C. and Thomas, S. (2007). Sorption and
diffusion of aromatic solvents through linear low density polyethylene–ethylene
vinyl acetate blend membranes. Journal of Material Science, 42(12): 4552–4561.
287. Maiti, M. and Bhowmick, A. K. (2007). Effect of polymer–clay interaction on
solvent transport behavior of fluoroelastomer–clay nanocomposites and prediction
of aspect ratio of nanoclay. Journal of Applied Polymer Science, 105(2): 435–445.
288. Tang, C. Y., Chen, D. Z., Yue, T. M., Chan, K. C., Tsui, C. P. and Yu, P. H. F.
(2008). Water absorption and solubility of PHBHV/HA nanocomposites.
Composite Science and Technology, 68(7-8): 1927–1934.
289. Sreekala, M. S., Kumaran, M. S. and Thomas, S. (2002). Water sorption in oil palm
fiber reinforced phenol formaldehyde composites. Composites Part A: Applied
Science and Manufacturing, 33(6): 763 – 777.
290. Crank, J. (1975). The mathematics of diffusion, 2nd Eition. Oxford University
Press, Great Britain.
291. Maged, S., El-Nashar, D. E. and Maziad, N. A. (2003). Cure characteristics and
physicomechanical properties of calcium carbonate reinforcement rubber
composites. Egyptian Journal of Solids, 26(2): 241 – 257.
292. Cai, H., Li, S., Tian, G., Wang, H. and Wang, J. (2003). Reinforcement of natural
rubber latex film by ultrafine calcium carbonate. Journal of Applied Polymer
Science 87(6): 982–985.
199
293. Deng, C., Chen, M., Ao, N., Yan, D. and Zheng, Z. (2006). CaCO3/natural rubber
latex nanometer composite and its properties. Journal of Applied Polymer Science,
101(5): 3442–3447.
294. Jin, F. and Park, S. (2008). Thermo-mechanical behaviors of butadiene rubber
reinforced with nano-sized calcium carbonate. Materials Science and Engineering
A, 478(1-2): 406 – 408.
295. Mishra, S.; Sonawane, S. H.; Badgujar, N.; Gurav, K.; Patil, D. (2005).
Comparative study of the mechanical and flame-retarding properties of
polybutadiene rubber filled with nanoparticles and fly ash. Journal of Applied
Polymer Science, 96(1): 6-9.
296. Chakravarty, S. N. and Chakravarty, A. (2007). Reinforcement of rubber
compounds with nano- filler. Elastomers and plastics. 60(11): 619 – 622.
297. Narayanan, E., Bhagawan, S.S., John, B. and Bhaskaran, A. K. (1998). Space
quality rubber products: Case study with nitrile/butadiene rubber based engine
gimbal control system bladder. Plastics, Rubber and Composites:
Macromolecular Engineering, 27(7): 337–340.
298. Scocchi, G., Posocco, P., Handgraaf, J. W., Jfraaije, G. E. M., Fermeglia, M. and
Pricl, S. A. (2009). Complete multiscale modelling approach for polymer-clay
nanocomposites. Chemistry - A European Journal, 15(31):7586–7592.
200
Publications based on the work
International Journal Publications:
1. Meera Balachandran, Lisha P Stanly, R. Mulaleekrishnan and S.S. Bhagawan.
(2010). Modeling NBR- layered silicate nanocomposites: A DoE approach, Journal of
Applied Polymer Science (Wiley Publications), 118(6): 3300–3310. doi:
10.1002/app.32147
2. Meera Balachandran and S.S. Bhagawan. (2011). Studies on acrylonitrile-butadiene
copolymer (NBR) – Layered silicate composites: mechanical and viscoelastic
properties, Journal of Composite Materials (Sage Publications), 45(19): 2011-2022.
doi: 10.1177/0021998311399484
3. Meera Balachandran, Sriram Devanathan, R. Muraleekrishnan and S.S. Bhagawan.
Optimizing properties of nanoclay - nitrile rubber (NBR) composites using face
centered central composite design, Materials and Design (Elsevier Publications),
Available online 8 April 2011, doi:10.1016/j.matdes.2011.03.077
4. Meera Balachandran, R. Muraleekrishnan and S.S. Bhagawan, Modeling And
optimizing properties of nanoclay - nitrile rubber (NBR) composites using Box-
Behnken design, Rubber Chemistry and Technology (American Chemical Society),
(in press).
5. Meera Balachandran and S.S. Bhagawan, Mechanical, Thermal and transport
properties of nitrile rubber (NBR) - nanocalcium carbonate composites, Journal of
Applied Polymer Science (Wiley Publications), (in press).
6. Meera Balachandran, S.S. Bhagawan, Mechanical, thermal and transport properties
of nitrile rubber (NBR) – nanoclay composites, Journal of Polymer Research
(Springer), (accepted).
International Conference Publications
7. Meera Balachandran, T. Mythili, M. Smitha and S. S. Bhagawan, Mechanical
behaviour of nanoclay- NBR composites, Proceedings of International Conference
Asia Rub Tech Expo. Kochi, India, November 2006, p. 64.
8. Meera Balachandran, Lisha P Stanly, R. Muraleekrishnan, S.S. Bhagawan, Design
of experiments for optimizing NBR nanocomposite formulations, Proceedings of
201
International conference on Advances in Polymer Technology. Kochi, India,
September 24-27, 2008, p. 82.
9. S.S. Bhagawan and Meera B. Sasikumar, Approaches in modeling properties of
polymer nanocomposites, Proceedings of Second international Conference on Natural
Polymers, Bio-polymers, Bio-Materials, their composites, Blends, IPNs and Gels
Polyelectrolytes and Gels: Macro to Nano Scales, ICNP-2010. Centre for
Nanoscience and Nanotechnology, Mahatma Gandhi University, Kottayam, India,
September 24-26, 2010, pp. 35-36.
10. S.S. Bhagawan and Meera Balachandran, Elastomer based composites, Proceedings
of International Conference on Latest in Polymers – 2010. J.J Murphy Research
Centre, Rubber Park India (P) Ltd., Kochi, India, 12-13 August, 2010. p. 11
11. S.S. Bhagawan and Meera B. Sasikumar, Role of DoE [Design of Experiments] in
development of nanoclay – nitrile rubber composites. Proceedings of International
Conference on Manufacturing Science and Technology (ICMST 2010), jointly
organized by Indian Institute of Space Science and Technology and Materials
Research Society of India, Thiruvananthapuram, India, October 29-31, 2010. pp 8.4 –
8.5
National Conference Publications
12. Meera Balachandran, R. Muraleekrishnan, S.S. Bhagawan, Optimizing the
properties of nanoclay – nitrile rubber composites using Box-Behnken design,
Proceedings of ISAMPE National Conference 2009(INCCOM-8) “Emerging Trends
in Composite Materials and Technology”. Thiruvananthapuram, December 4-5,
2009. pp. 147-153.
13. Dr. S. S. Bhagawan and Meera Balachandran, Elastomer-based nanocomposites:
Trends and Challenges, Proceedings of the National conference on "Frontiers in
Polymer Nanomaterials and Composites. B S Abdur Rahman University, Chennai,
India, March 18-19, 2010.