Post on 16-Jul-2020
transcript
www.momentocam.com
MD-5200 USER’S MANUALFull HD Driving Image Recorder
■ Copyright laws prohibit this manual to be copied, modified or translated without the written consent of MOMENTO.■ The contents in this manual can be changed or modified due to technical errors or improvements therefore we cannot guarantee the manual’s precise information.■ MOMENTO has the right to change or modify the product and manual contents at anytime without prior notice for improvements or customization.
■ MOMENTO is not responsible for damages that can occur from using unauthorized parts and accessories other than from the manufacturer.■ It is dangerous to operate this device while driving.■ The device and the recorded videos are intended for personal use and reference only. ■ Based on the user’s setting and environment, please be informed that the device may NOT record videos of all accidents.■ Please test the Micro SD card for errors frequently and because it is a consumable item, it should be replaced periodically. ■ Handle the device with care.■ Install the device where it doesn't interfere the driver's vision.■ Check for local driving rules before installing the device (as it may be different according to each region).■ Do not use wet hands when operating this device.■ Please use this device with the original parts provided from the manufacturer.
< CAUTION >
02
Before Using MOMENTO’s MD-5200
04
Table of Contents
1. Warning and Caution .............5
2. Product Features .....................9
3. Product Overview .................12
4. Device Installation ................17
5. Basic Operation ....................23- Using the Touch Screen- Device Control- LED Indicator Light- File List Management- Firmware Update
6. PC Viewer ................................39
7. Others .....................................45- Product Specifications- Troubleshooting- Warranty- FCC Statement
Warning and Caution01
■ Do not disassemble, repair, or remodel the device – this can cause an electric shock.
■ Unplug the power cable if you smell something burning , smoke coming out or anything unusual.
■ Do not spray water or liquid on the device as the device will not function properly.
■ Handle the device with care.
■ Plug the power cable all the way in to make sure it is connected to the device.
■ Do not use damaged power cable.
■ Do not cut, bend, or mishandle the power cable.
■ Place the device and the cables away from heat or expose to high temperature.
■ If the device is not being used for a long period of time disconnect the power cable from the main device.
as this can cause battery discharge in the vehicle.
■ Do not use the device next to flammable liquids or gas.
■ It is dangerous to operate this device while driving.
■ Use only the voltage that is provided for this device.
■ Do not apply extreme force and place heavy items on the device and the power cable.
■ Do not use wet hands when operating this device.
These cautions are provided for user’s safety and prevent damages in the device.Please take the time to read the manual for proper product usage.
Information to prevent factors that can cause physical damage
Information to prevent service errors or system damage
Warning
Caution
!
!
!
! Warning
Warning and Caution
05
■ Always keep the camera lens cleaned.
■ Make sure the device is firmly mounted during installation as it has a tendency to shift
when driving over speed bumps or unpaved roads.
■ If the device breaks, call or bring it to a service center.
Do not touch the device as your hands might get hurt from the broken parts.
■ Do not use the device for a long period of time with the vehicle’s engine turned off.
■ Collision recording may not be enabled if the impact is very minor.
■ Install the hardwire cable through a professional installer.
■ Use this device only with the original parts provided from the manufacturer.
■ Reception of the GPS signal can be affected by the weather, environment, or road conditions.
■ Install the device where it does not interfere with the driver’s view.
■ Do not apply excessive force on the Micro SD card or insert it in the wrong direction.
■ Store Micro SD card separately when an accident occurs or if the device is not operating properly.
■ Stay away from parking in areas with direct sunlight.
■ The resolution quality of the video can be affected by the environmental conditions.
■ Maintain the device and the power cable in a safe area.
■ Do not use the device in high temperature or humidity.
■ The recommended operating temperature is -20° ~ 60°C / -4° ~ 140°F.
■ Windows of the vehicle should be always cleaned to use the device at best.
■ Contact customer service if you feel the device is not working properly.
! Caution
Warning and Caution
06
■ Do not use a pin or a nail to push the LCD.
■ Do not use excessive force when using the control buttons.
■ Do not use chemicals to clean the device.
■ Keep the product away from children and pets.
! Caution
Warning and Caution
07
Product Features02
■ Sony Exmor R Sensor Provides clean and clear video quality
■ Full HD Resolution FHD (1920x1080) resolution for both Front / Rear cameras
■ 3.5” TFT LCD Provides high clarity and extreme brightness
■ Format Free Technology Provides automatic memory format and maximizes the stability and minimizes file errors of Micro SD Card
Automaticlly overwrites files when storage capacity is needed
■ PIP Multi Screen Multi Screen feature allows you to view front / rear view screens simultaneously.
■ Audio / Voice Guide Provides voice guide and alert sounds / messages
■ Micro SD Card Format Micro SD card can be formatted directly using the device.
■ Various Recording Continuous, Incident-Continuous, Incident-Parking, Parking, Manual Recording types
■ Battery Discharge Measures the voltage (battery) real time and prevents the vehicle from being discharged
Product Features
09
■ Operation Temperature Sensor Automatically senses over heating and high temperature of the devices and shuts off the power for protection
■ PC Viewer PC Viewer for Windows is used to watch recorded videos.
■ Location and Speed Limit Sensor Provides information about the vehicle’s location and speed
Compatible with Google Map and allows to check travel routes
■ Front Vehicle Move Alert (FVMA) Alerts the driver when the front vehicle starts to move from a complete stop
Product Features
10
Product Overview03
※ Check for any missing components.※ The product and manual contents can be changed or modified at anytime without prior notice for improvements or customization.※ Additional components are sold separately.
12
Main Unit
Rear Camera Rear CameraCable
Windshield Mount Quick Start Guide Hardwire Cable32GB
Micro SD Card
GPS Module
Product Overview
■ Package Components
■ Main Unit (Front Camera)
13
Product Overview
④ DC-IN
③ MIC
② GPS Port
① R-CAM
⑤ Mount
⑥ RESET
⑦ Camera Lens
⑩ Speaker
⑪ LCD
⑫ Micro SD Card
⑬ Power / Manual Record
⑨ STATUS
⑧ Front LED
Rear camera port
GPS module port
Microphone for voice and audio recording
Power cable port
Installation mount
Reset button
Front camera for video recording
Indicates parking status and provides security effect
Notification for recording
Voice guidance
3.5” TFT LCD for live view, playback, menu operation
Memory card slot (check for insert / remove direction)
Press more than 3 secs : Power ON/OFFPress less than 3 secs : Manual Record
14
Product Overview
① Mount
② Camera Lens
③ LED
④ Mini USB Port
Installation mount
Rear camera for video recording
Indicates vehicle is equipped with dash cam
Mini USB port to connect the main (front camera) unit
⑤ Mirror Switch Mirror feature to change left / right view of the rear camera※ Turn the dashcam off, disconnect the rear camera, and operate the mirror switch
④
①
②③
⑤
15
Product Overview
■ Rear Camera
04Device Installation
< CAUTION >■ It is dangerous to operate this device while driving.
■ Please check if the Micro SD card is inserted correctly before connecting to power.
■ Make sure the installation area is clean.
■ Disconnect the power cable if you are not using the device for a long period of time.
■ Handle the device with care.
■ Do not drop the product as it may not function properly.
■ Please make sure that the device is used in the suggested operating temperatures between -4° ~ 140°F.
■ During extreme high temperatures or hot weathers, parking indoors is suggested.
17
Device Installation
18
Device Installation
※ Do not apply excessive force on the Micro SD card or insert it in the wrong direction
※ Push the Micro SD card until you here a click sound or recording will not start.
※ Make sure there are no particles on the Micro SD card.
※ It is recommended to use the Micro SD card with this device only.
※ Do not remove the Micro SD card when the device is operating.
※ Backup the video �les (PC, USB) periodically.
Insert / Remove Micro SD Card
Insert
Do not apply excessive force to the Micro SD card or insert it in the wrong direction.
Remove
▶ Refer to the above image and check the direction before inserting the Micro SD card into the slot.▶ Push the Micro SD card all the way.▶ You will here a voice guide that the Micro SD card has been inserted correctly when the power is on.
1) Main Unit Installation
1) Main Unit Installation
1. Select and clean the area where the product will be installed.2. Connect the main device and the mount.3. Remove the double sided tape and attach the device.4. Connect the rear camera and GPS cables first, then connect the power cable
※ Before installation, make sure the engine is turned o�.
※ Do not install the device that interferes with the driver’s vision.
※ Make sure the installation area is cleaned.
19
Device Installation
Hardwire Cable
Rear Camera Cable
GPS Module
20
Device Installation
2) Rear Camera Installatio
1. Select and clean the area where the product will be installed.2. Remove the double sided tape and attach the device.3. Connect the rear camera and the cable.
※ Make sure the installation area doesn’t interfere with the window’s infrared signals.
※ Before installation, make sure the engine is turned o�.
※ Make sure the installation area is clean.
※ Turn the main power o� to use the rear camera’s mirror function.
3) External GPS Module Installation
1. Connect the external GPS module to the right connector in the device.2. Organize the cable lines across the car’s ceiling.3. Remove the double sided tape and attach the module.
※ Before installation, make sure the engine is turned o�.
※ Make sure the installation area is cleaned.
21
Device Installation
Basic Operation05
23
1. Using the Touch Screen
※ Touch the LCD to use front view / rear view / PIP features (Rear camera needs to be connected for rear view feature to work)
2016/11/27MIC ON ①
②
③
④
Current Date and Time
GPS Status
Voice & Audio Record
Main Menu
Main Menu → System Settings → Time Settings* Automatic setting if GPS is connected
Main menu screen
GPS ON / OFF
Main menu → MIC ON/OFFMIC ON : recording / MIC OFF : not recording
1) Live View
24
1. Using the Touch Screen
2) Screen Saver
①
Recording Status
REC: continuous recordEVENT: incident / manual record
②
③
④
Voice & Audio Recording Status
GPS Signal Status
Current Time and Date
Shows current time and date
MIC ON: recording / MIC OFF: not recording
GPS ON / OFF
▶ Turn ON Screen Saver Mode → Main Menu → LCD Time Out : Clock▶ Touch screen to go back to Live View Screen
2016.11.27 SUN
25
1. Using the Touch Screen
▶ Recording stops in Settings, ADAS, File List.
①
②
③
④
⑤
⑥
⑦
Settings
ADAS
File List
LCD Time Out
Volume
MIC
LIVE
Main menu settings → System Settings / Dashcam Settings / F/W version
List of recorded files
LCD screen off setting menu→ 30sec / 1min / 3min / clock / always on
Changes the volume level (5=loudest)→ OFF / 1 / 2 / 3 / 4 / 5
ADAS menu settings → FVMA
Audio / voice record using the microphone→ ON / OFF
Go to Liveview
�������� ���� ���� ����
���������� ���
������
3) Main Screen
26
1. Using the Touch Screen
������ ��������
����������������
�� ����������
������������
��������
������� ��������
����� �������
������ ���������������
������ ��������
����� ����
������ ����� ���������������
▶ Main Menu → Settings → System Settings
①
②
③
④
⑤
⑥
⑦
Language
Language setting → English / Francais
Time Settings
Touch Calibration
SD Card Format
Factory Reset
System’s time setting * Automatic setting if GPS is connected
Resetting touch screen
Micro SD Card Format* Saved files will be deleted. Backup the files before formatting
Reset settings to factory settings (except for recorded files)
HOME
Move to Main menu screen
BACK
Back to previous screen
4) System Settings
27
1. Using the Touch Screen
������� ��������
����� �������
������ ���������������
������ ��������
����� ����
������ ����� ���
▶ Main Menu → Settings → Dashcam Settings
①
②
③
④
⑤
⑥
Video Quality
Impact
Front LED
Parked Storage Priority
Parked Cam Timer
Power Save
Able to select the recording video quality→ Low / Normal / High※ If the Video Quality is changed, the SD card will be formatted.
Enable / disable the LED on the main unit (in parking mode) → ON / OFF
Allocating storage capacity on memory card for park recording modes→ OFF / 25% / 50% (* OFF : not using parking mode)※ If the Parked Storage Priority is changed, the SD card will be formatted.
→ 6H / 12H / 24H / 48H / OFF
This feature senses incidents while driving and records them* When a incidents is detected, driver will be notified with a tone alert and incident recording will start.→ OFF / 1 / 2 / 3 / 4 / 5 / 6
If the vehicle’s battery falls below the indicated value, the ignition will not start.→ 11.7V / 11.9V / 12.0V / 12.1V / 12.2V
5) Dashcam Settings
28
1. Using the Touch Screen
6-1) File List
▶ Main Menu → File List
①Continuous
Continuous record
②
③
④
Motion Detection
Incident
Manual
Manual record
Motion detection record during parking
Incident record during driving, Incident record during parking
���� ����
29
1. Using the Touch Screen
6-2) File List
①Front / Rear Camera File List
Sorting the file list according to front / rear recordings
②
③
④
File List : Up
File List : Down
File List
Select the file to play from the list
Moving file list up
Moving file list down
����������
REC2_20161125_150543
REC2_26161125_150643
REC2_26161125_150743
REC2_26161125_150843
30
1. Using the Touch Screen
REC2_20161125_150543.avi
6-3) Main Menu - File List
HOMEGo back to Main Menu
PREVIOUS
Play previous file
PLAY
Play file
STOP
Pause
Next
Play next file
BACK
Back to previous screen
①
②
③
④
⑤
⑥
31
1. Using the Touch Screen
���� ��������
����������� �������
���� �����
7) FVMA(Front Vehicle Move Alert)
①
FVMA (Forward vehicle move alert)
If the front vehicle starts to move from a complete stop, “GO” message is shown on the screen.→ ON / OFF
※ FVMA may not operate correctly if the distance between the front car is more than 9ft (3m).※ADAS features’ accuracy can be affected by conditions below. - continuous operation of wipers, - heavy reflection from the window, - driving at night, through tunnels, - heavy rain and snow, - road and environmental conditions
32
2. Device Control
No. Description
1
2
3
4
5
Power ON
Touch LCD
Event Record
Parking Mode Record
Event Record during Parking
TFT Touch LCD is used to control the menus.
- Incident Record during continuous record mode when the device senses an impact or a collision.
- After the event has been recorded, Continuous Record will start again.
- Motion record during parking.
- Battery Discharge features are enabled to prevent the vehicle’s battery from being discharged.
The device will automatically turn off based on the Parked Cam Timer Settings’ duration
and Power Save Settings’ voltage level.
- Event (incident) record during parking.
- The device either senses an impact or a collision and detects a motion while the car is
parked and records the event or the motion.
- Main power ON button
- Once the device is connected it will automatically turn ON / OFF by vehicle’s ignition.
Green LED light means the device will start to record.
A voice guide will alert the driver “continuous recording mode”.
- The device will be set at continuous recording mode when the power is connected.
Control Function
33
3. LED Indicator Light
Recording Type
1
2
3
4
Driving Continuous
Driving Incident
Parking Motion Detection/Incident
Parking
Rear Green LED
ON
Blink every 1 sec
Blink every 1 sec
OFF
Front Blue LED Meaning
OFF
OFF
Blink every 0.5 sec
Blink every 1 sec
Continuous record during driving
Incident record during driving
Motion Detection/Incident Record during parking
Parking
No.
34
4. File List Management
File Name & Camera Channel(1: front / 2: front & rear)
Date Time
▶ Recorded files are saved in Micro SD card.▶ Files are saved in the same sizes due to format free technology. Continuous : 80MB / Parked, Motion, Incident, Manual : 40MB▶ In order to use the format free technology at best, a folder is not created in the Micro SD card.▶ Recorded files are saved in Micro SD card by date and hour.
REC
MOT
EVT
IMP
MAN
Continuous Record
Record during Parking (motion detection)
Incident during driving (Incident – Continuous)
Incident during parking (Incident – Parking)
Manual record
Continuous File
Motion Detection File
Incident File
Manual Record File
File Name Meaning File List
35
4. File List Management
▶ Recording Time : Format Free Technology allows the file sizes to be preset. Recording time may vary based on the video quality. (refer below)
38 sec 51 sec 1min 16sec
37sec25 sec19 sec
Incident-ContinuousIncident-ParkingParkingManual
Continuous
TypeLowHigh Mid
Front Camera Resolution
36
4. File List Management
Parked Storage Priority : 50%
Directory Percentage SD Card
Driving
Parking (motion)
Manual
Event
38%
37%
5%
15%
5.62GB
5.47GB
740MB
2.22GB
▶ Storage partition can be modified manually : Settings → Dashcam Settings → Parked Storage Priority※ Reference numbers may vary depending on recording environment and image quality (also after �rmware update).
Parked Storage Priority : 25%
Driving
Parking (motion)
Manual
Event
57%
18%
5%
15%
8.43GB
2.66GB
740MB
2.22GB
Parked Storage Priority : 0%
Driving
Parking (motion)
Manual
Event
75%
0%
5%
15%
11.1GB
0GB
740MB
2.22GB
■ Storage Partition by Parked Storage Priority
37
5. Firmware Update
▶ Turn the device off and remove Micro SD card▶ To format Micro SD card, connect PC and Micro SD card (File System : FAT 32 / Allocation Unit Size : 64KB)▶ After format is completed, copy the updated file on Micro SD card▶ Insert the Micro SD card in the device and turn the device on and update will start.▶ Once the update is complete, recording will start.
1) Select Micro SD Card Select Micro SD Card (M4) in My ComputerRight click and select “Format”
2) Micro SD Card Format In the Disc Format Window, select the : ▶ File System : FAT32▶ File Size : 32KB▶ Uncheck “Quick Format”
3) Copy the Update File to Micro SD CardPlace the file MD5200_1.0.0_ENG_Knl_App.rom file into theMicro SD card that has been already formatted and delete it.※ File version can change based on each update.
06PC Viewer
1) Viewer Installation
Download the setup.exe file at www.momentocam.com
①
④ ⑤
② ③
※ System Requirements- Windows XP or higher- Dual Core 2.8GHz or Intel i5 2.0GHz or higher- IE 9.0 or higher- Direct3D 9 graphic
39
PC Viewer
2) Main Screen Overview
Front Camera Rear Camera
GPS Coordinates Driving Speed
Recording List
40
PC Viewer
2) Main Screen Overview
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
Settings
Save As : saving recorded files
Screen Capture : allows to capture screen during playback
Front Camera : playback front camera’s files
Front - LEFT/RIGHT | UP/DOWN | FULL SCREEN | CHANNEL CHANGE
Rear Camera : playback rear camera’s files
Select Language / Homepage / Program Info
Rear - LEFT/RIGHT | UP/DOWN
Select Micro SD Card Folder
GPS Information : Recognize vehicle speed and location
G-Sensor Information
Video Control Buttons
File List
41
PC Viewer
3-1) Settings – System Setting
Language
English / Francais
MIC
ON/OFF
Volume
OFF / 1 / 2 / 3 / 4 / 5
LCD Timeout
30sec / 1min / 2min / Clock / Always ON
Time Setting
42
PC Viewer
①
②
③
④
⑤
3-2) Settings – Dashcam Setting
Video Quality
High / Normal / Low
Impact Sensitivity
0 / 1 / 2 / 3 / 4 / 5 / 6
Front LED
OFF / ON
Parking Storage Priority
OFF / 25% / 50%
Power Cam Timer
OFF / 6h / 12h / 24h / 48h
Power Saving
11.7V / 11.9V / 12.0V /12.1V / 12.2V
ADAS FVMA
OFF / ON
Speed Unit
mph / km/h
43
PC Viewer
①
②
③
④
⑤
⑥
⑦
⑧
07Others
45
1. Product Spec1. Product Specifications
Front / Rear : FHD (1920x1080)
Item Description
Model
LCD
Audio / Speaker
Frame Rate
Acceleration Sensor
GPS
Input Power Source
Auxiliary Power Unit
Resolution
MD-5200
3.5” TFT LCD
Embedded microphone, speaker
Up to 30fps (Front / Rear : 1080P)
3 Axis Acceleration Sensor
Supports external GPS port
DC 12/24V
Super Capacitor
104 x 65.5 x 30.25mm / 89g4 x 2.6 x 1.2in / 3.14oz
Micro SD Card16GB / 32GB / 64GB (FAT32 format)
Continuous Record,Incident Record(driving, parked),Motion Detection Record, Manual Record
Front : 1/2.8” CMOS Color Image SensorRear : 1/3” CMOS Color Image Sensor
Operation Temperature
Recording Mode
Size / Weight
Capacity
Camera
Item
-20°~ 60°C / -4 ~ 140°F0° ~ 50°C / 32° ~ 122°F
Description
46
Check if power cable is properly connected.Check if power is ON.Unplug the power cable and reconnect after 3 mins.
Reset the feature in touch calibration menu.
LCD display doesn’t turn on in parking mode.LCD is ON during continuous mode.
Check if MIC is not ON in main menu.
Check Parked Storage Priority is not OFF in dashcam settings menu.
Check if Volume is not OFF in main menu.
No Power
LCD Display doesn’t turn ON
Unable to record Audio / Voice
Unable to record during parking
Unable to hear Audio / Voice
Touch Screen is not working
How do I view recorded files?
How do I update the camera firmware?
Condition Description
Visit www.momentocam.com to download the latest Momento Viewer.
Visit www.momentocam.com to download the latest Momento Camera Firmware.
2. Troubleshooting
47
3. Limited Warranty on Parts & Labor
MOMENTO provides a warranty to the original purchaser of a new Product against defects in workmanship and materials for a period of two (2) years. If a product covered by this warranty is determined to be defective within the warranty period, MOMENTO will either replace or repair the product at its sole option and discretion.
Products determined defective must be sent to an MOMENTO service center to obtain warranty service.
Proof of purchase in the form of a receipt is required to show that Product is within the warranty period and product must have original and legible serial number information. To obtain warranty service, please register your system at momentocam.com/warranty
This Warranty is subject to change without notice. FOR COMPLETE AND UPDATED WARRANTY INFORMATION PLEASE VISIT : momentocam.com/warranty
■ warranty@momentocam.com■ 888-820-3690
4. FCC Statement
48
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : - Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION : Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
MD-5200 USER’S MANUAL