Post on 02-Aug-2018
transcript
ASSOCIATE
MEMBERS
CHLORINEINSTITUTE
Fully Lined High Performance Plug Valves Engineered for Industries’ Most
Hazardous & Corrosive Services
2
LPG Valve Standard Features Optional FeaturesApplication
Conforming StandardsSizeBody A-395 Ductile Iron A-216 WCB & A-351 CF8M
Lining PFA PVDFExternal Coating
TemperatureProcess Sealing
Stem SealingPressure Rating
Connection TypeControl Characteristics
Flow Direction
Epoxy
Reliable Isolation & Control of Extremely Corrosive Liquids and Gas
-40°F to 400°F 0°F to 275°F
ASME B16.5, ASME B16.10, ASME B16.34 & API 598
Equal PercentageBidirectional
Gas Tested, Bubble tight per API 598
1/2" - 8"
Innovative PTFE Chevron Packing250 PSIG (A-395 DI) 285 PSIG (A-216 WCB)
ASME 150# Flanged
Dynamically Loaded SES System
(PVDF)(PFA)
Design Features
• Innovative Stem Sealing System • Bidirectional Zero Leakage • Mechanically Locked Valve Linings • Anti-rotation bonnet • Standard Lockable Lever Handles • Double-D stem profile • Cavity Free • In line Adjustment
Chlorine and HCL ValvesAEGIS’ LPG Series valves are ideally suited for the stringent performance requirements demanded with wet chlorine gas and aqueous hydrochloric acid applications. Produced from premium virgin grade resins, our thick fluoropoly-mer linings features superior resistance to the effects of chemical attack, permeation, absorption, swelling and cold flow thus providing industry with convincing performance in handling these highly regulated commodities. The liner integrity of each valve is tested with 20,000 volts to ensure there are no defects. Valves for these services are thoroughly cleaned and packaged according to our factory procedures and conform to the Chlorine Institute Pam-phlet #6 specifications.
Safety Stem SealAEGIS’ LPG Series valves are designed to offer long-term maintenance-free security against the harmful affects of fugitive emissions. Our standard innovative three point stem seal system has revolutionized the performance benchmark for lined plug valves.
ApplicationsAEGIS’ LPG Series valves are routinely specified for hazardous services such as:
• Acetic Acid • Alcohols • Brine • Bromine • Caustic • Chlorine Gas • Chlorine Condensate • Chlorinated Brine • Chlorine Dioxide • Chlorinated Organics • Chlorinate Solvents • Chlorosulfonic Acid • Deionized Water • Ethylene Dichloride • Ferric Chloride • Hydrobromic Acid • Hydrochloric Acid • Hydrofluoric Acid • Hydrogen Peroxide • Nitric Acid • Oleum • Phosgene Gas • Phosphoric Acid • Sodium Hypochlorite • Triethanolamine • Vinyl Chloride Monomer
3
Lockable Dual Position Handle
Atmospheric Seal
Chambered Raised Face
Securely Anchored & Locked Linings for Vacuum Service One Piece PFA Encapsulated Plug/Stem
Integral Actuator Mounting Flange Flats
Tertiary PTFE Packing
Gland Adjustment Fasteners
Cavity Free
Primary Seal
Secondary Seal
Belleville Loaded Packing
Belleville Loaded Plug and Diaphragm
Vent Hole
Atmospheric Seal
Dynamically Loaded Sealing System(Patent Pending)
4
L
H
Q
W x X ↓ Y
P
S
F
f
b
d
S
AEGIS®LPG Series
Size L øf øF øb øS S d H P Q W X Y
1/2" 4.25 0.51 3.50 0.51 0.47 0.35 0.59 2.56 3.62 N/A 2 5/16"-18 0.47
3/4" 4.61 0.71 3.90 0.71 0.47 0.35 0.59 2.56 3.74 N/A 2 5/16"-18 0.47
1" 5.00 0.98 4.25 1.00 0.59 0.43 0.79 3.00 4.19 1.77 4 5/16"-18 0.4
1-1/2" 6.50 1.50 5.00 1.49 0.67 0.51 0.98 3.54 5.63 1.77 4 5/16"-18 0.47
2" 7.00 1.97 5.98 1.96 1.02 0.86 1.18 3.93 6.18 2.24 4 5/16"-18 0.47
3" 8.00 2.99 7.48 3.00 1.14 0.79 1.18 4.76 7.13 3.5 4 3/8"-16 0.6
4" 9.00 3.94 9.02 3.93 1.25 0.86 1.37 6.00 7.87 4.01 4 7/16"-14 0.63
6" 10.51 5.91 10.98 6.00 1.70 1.00 1.57 9.96 9.45 4.01 4 7/16"-14 0.63
8" 11.50 7.87 13.50 7.87 1.96 1.41 1.77 13.38 10.20 6 4 1/2"-13 0.63
*For DLS system, contact Aegis for dimensions.
5
N-m In-lb1/2" 29 255 11
3/4" 34 300 13
1" 59 520 39
1-1/2" 169 1,500 84
2" 194 1,720 177
3" 203 1,800 286
4" 339 3,000 530
6" 576 5,100 1,060
8" 2,034 18,000 1,580
Size Operating Torque CV
Standard Option1 Body2 Plug3 Diaphragm Seat4 Stem Seal - Packing5 Diaphragm6 Pusher7 Bonnet8 Adjusting Set Screws 316SS Alloy 209 Hub
10 Handle11 Hub Bolt12 Bonnet Bolts Zinc Plated ASTM A193 B7 Alloy 2013 O-ring14 Name tag 304 SS
PFA lined ASTM A351 CD4MCu
ASTM A351 CF8M
304SS304SS
Viton
MaterialItem Description
PFA lined ASTM A216 WCB / A395 DI PFA lined ASTM A351 CF8/M
Virgin PTFEVirgin PTFEVirgin PTFE
ASTM A351 CF8M ASTM A216 WCB / A395 DI ASTM A351 CF8/M
1
2
3
45
6
7
9
8
10 11
13
12
0
50
100
150
200
250
300
0 50 100 150 200 250 300 350 400 450
Pres
sure
-PS
I
Temperature - F°
Pressure - Temperature RatingsWCB CF8M Ductile Iron
PFA Limit
PDVF Limit
6
Electro-Pneumatic Positioner
Pneumatic Positioner
Feedback ModulePressure Regulator Position Indicator
Digital Positioner
7
Type LPG LH Hand Lever
MG Manual Gear
DA Double Acting Actuator
Size 1/2" - 8" FC Fail Closed Actuator
FO Fail Open Actuator
B1 A395 DI*
B2 A216 WCB PS Proximity Switch
B3 A351 CF8M PD Digital Positioner
PP Pneumatic Positioner
PE Electro-pneumatic Positioner
C1 150# PR Pressure Regulator
C2 300# SV Solenoid valves
L1 PFA* C1 Chlorine
L2 PVDF C2 UPWC3 Oxygen
6. Operators
7. Accessories
8. Cleaning Procedure
* denotes standard
1. Type
2. Size
3. Body Material
4. Class
5. Lining
Type LPG
Size 1
Body Material B2
Class C1
Lining L1
Operators DA
Accessories PP
Cleaning Procedure C1
LPG-1-B2-C1-L1-DA-PP-C1
Ordering Example1" PFA Lined 150# A216 WCB body with a Double Acting Actuator, Pneumatic Positioner
with the valve being chlorine cleaned