Post on 07-Aug-2020
transcript
GENERAL BROCHUREGRAPHIC ARTS PRODUCTS
2 3
GRAPHIC ARTS PRODUCTSC
AB
SFolders
Collators
StitchersB
indersC
uttersO
thersD
igital Finishing
Bindery Control SystempXnet .........................................................................................................2CABSCABS6000 ................................................................................................4CABS4000S ...............................................................................................4SB-17 .........................................................................................................4SB-09S ......................................................................................................4SB-07 .........................................................................................................5MG-600 .....................................................................................................5HT-110 .......................................................................................................5HAL-4 .........................................................................................................5Digital FinishingAF-566F Digital ..........................................................................................6StitchLiner6000 Digital ...............................................................................6ColorWorks Pro Plus .................................................................................6 ColorWorks ................................................................................................6CF-100 / CW-8000NL ................................................................................7HOF-400 ....................................................................................................7HOF-30 ......................................................................................................7FoldersAFC-746F...................................................................................................8AFC-746S / AFC-746D ..............................................................................8AFC-744A / AFC-744S...............................................................................8AF-762KL / AF-762KLL ..............................................................................9AF-762KLS.................................................................................................9AFC-566FG ...............................................................................................9AFC-566A ..................................................................................................9AFC-564A ..................................................................................................9AFC-492 ....................................................................................................9RFU-54 ....................................................................................................10PST-40 .....................................................................................................10PSX-56 / PSX-56R ...................................................................................10MKU-54 ....................................................................................................10MKU-54T ..................................................................................................10AF-566T4F ...............................................................................................11AF-406T6A ..............................................................................................11PR-40 .......................................................................................................11KTU-40 .....................................................................................................11GFB-40.....................................................................................................11RB-40 .......................................................................................................11CRF-362...................................................................................................12EF-354 (SR) .............................................................................................12EF-35 (SR) ...............................................................................................12KTU-35 .....................................................................................................12ED-40 .......................................................................................................12ED-354 .....................................................................................................12PF-40L .....................................................................................................12PF-39 .......................................................................................................12CollatorsVAC-1000 ................................................................................................13VAC-600H ...............................................................................................13SAC-150 ..................................................................................................13HAC-120 .................................................................................................14TAC-8 .......................................................................................................14SA-40 .......................................................................................................15BC-20 .......................................................................................................15ST-60 .......................................................................................................15ST-40 .......................................................................................................15CCR / CCR-DX ........................................................................................15ST-20 / ST-20R ........................................................................................15PJ-75 / PJ-77 / PJ-77R ............................................................................15IC-VAC600H ............................................................................................15StitchersStitchLiner6000 ........................................................................................16StitchLiner5500 ........................................................................................17IM-30 ........................................................................................................17SPF-200A / FC-200A ...............................................................................18SPF-200L / FC-200L ................................................................................18HP-200A...................................................................................................18SPF-8 .......................................................................................................19SP-1 .........................................................................................................19BindersBQ-470 .....................................................................................................20BQ-280PUR .............................................................................................20BQ-270V ..................................................................................................21BQ-160 / BQ-160PUR ..............................................................................21CRB-160 / CRS-36...................................................................................21CuttersHT-1000V .................................................................................................22HT-80 .......................................................................................................22HT-30C.....................................................................................................23APC-61II / APC-61IISB ...........................................................................23PC-64II.....................................................................................................23PC-45 .......................................................................................................23OthersHCM-1 / HCP-1 ........................................................................................24HCB-2 ......................................................................................................24 GMS-7 ......................................................................................................24PJ-100 ......................................................................................................24VP-66 .......................................................................................................25VP-53 .......................................................................................................25JM-66 / JM-53 ..........................................................................................25Specifications .....................................................................................25
pXnetCONTENTSHorizon Industrial Products
*Compatible with pXnet system
Perfect BinderSB-09SSB-07BQ-470BQ-270/270CBQ-270VCase BinderHCB-2Perfect Binding LineCABS6000CABS4000S
Bind3
Saddle-stitching SystemStitchLiner6000StitchLiner5500BookletmakerSPF-200A/FC-200ASPF-200L/FC-200L
Stitch4
In-line Saddle-stitching SystemStitchLiner6000 DigitalIn-line FolderAF-566F Digital
Digital Finish5
Document FinisherColorWorks Pro PlusColorWorks
Hydraulic CutterAPC-61II Variable TrimmerHT-1000VThree-knife TrimmerHT-80Three-side TrimmerHT-30/30C
Cut1
Computerized FolderAFC-746FAFC-746S/746DAFC-744A/744SAFC-566FGAFC-566AAFC-564AAFC-546AAFC-544AAF-566T4FAF-406T6A
Fold2 Bi d3
c Cutter61II
Trimmer00Vnife Trimmer
de Trimmer/30C
t
d
816
3
816
3
816
3
816
3
888
888
816
3
816
3
816
3
816
3
816
3
816
3
816
3
816
3
816
3
816
3
816
3
816
3
41
816
3
816
3
816
3
816
3
816
3
816
3
816
3
816
3
816
3
816
3
816
3
816
3
816
3
J D F
J D F
J D F
J D F
J M F
Prepress
Press
Digital PressOperation Mgr
MIS
Postpress
Digital Finish
5
Stitch
4
Bind3
Fold2
Cut1
Satellite PC
BCRControl PC
Printer
Job Ticket
Job Ticket
Manage your bindery with JDF enabled control system.
The Horizon pXnet Bindery Control System is used as a central control point to schedule work, send job data to each finisher, monitor status of finishers and collect production sta-tistics from finishers in real-time. pXnet brings efficiency and value in high-mix/low-volume production environments where frequent job changeovers are needed. The pXnet system can also be interfaced with an existing workflow for automated JDF set-up.
4 5
GRAPHIC ARTS PRODUCTS
CABS CA
BS
FoldersC
ollatorsStitchers
Binders
Cutters
Others
Digital Finishing
17-Clamp Computer Aided Binding System
CABS6000
6 Hopper Modular Gathering System
MG-600MG-600 can be extended up to 6 gathering units (36 stations can be combined). Intuitive operation through intelligent touchscreen control can give very easy operation. Image checker (Option IC-MG600) detect sheets that have been im-properly positioned or misprinted. The ST-600 inline stacker allows gathering to be performed offline from the binder.
9-Clamp Computer Aided Binding System
CABS4000S
17-Clamp Perfect Binder
SB-17 The SB-17 features highly accurate automated set-up with simple and easy operation. Both EVA hotmelt and PUR hotmelt can be used by using the interchangeable melt tanks. EVA tank provides excep-tional glue application, even at high speed, thanks to 3 application rollers and a scrape roller on the EVA glue tank. Two milling stations provide a versatile range of spine milling preparations.
9-Clamp Perfect Binder
SB-09S The SB-09S provides maximum productivity for short to medium run length at up to 4,000 books per hour. Major system setups are per-formed automatically and book size or book thickness changeovers are completed within 3 minutes so that the SB-09S provides quick, easy makeready for frequent job changes. Revolutionary seesaw style feed plate for increased space efficiency.
Three-knife Trimmer
HT-110
The HT-110 features automated setup for different book sizes and precision cutting accuracy. Job changeovers are performed simply and quickly through the LCD touchscreen. Unlike other three-knife trimming systems, there are very few replacement parts when chang-ing over the HT-110.
SB-17
HT-110
MG-600
SB-17
HT-110
HT-110
SB-09SMG-600
CA
BS
Tipping Collator
HAL-4The HAL-4 provides high quality tipping of business reply cards or single sheets in a compact gathering unit. An optional CCD camera can be attached in the hopper to detect incorrectly loaded signatures.
HAL-4
SB-09S
7-Clamp Perfect Binder
SB-07
The 7-clamp system binder produces exceptional high quality binding with tight and square finish spine. Simple setup and easy operation speed up the changeover to adopt short-run binding job.
SB-07+LD-09S+AC-08+PM-20II
6 7
GRAPHIC ARTS PRODUCTSC
AB
SFolders
Collators
StitchersB
indersC
uttersO
thersD
igital Finishing
POD Digital FinishingD
igital Finishing
ColorWorks Pro Plus
AS-30S+CF-30S+ACF-30S+SPF-30S+HTS-30S
In-line Computerized Buckle Folder
AF-566F Digital
The AF-566F-Digital features easy operation and state of the art automation achieves skill-less setup and operation. System can be used both in-line and off-line with simple changeover procedure. In-line configuration eliminates the manual paper handling tasks and achieves high job integrity. The system can be enhanced with JDF workflow from upstream to the post press using Horizon pXnet system.
High Speed Off-line Feeder
HOF-30The HOF-30 can be connected to the VAC series collators to handle both offset and digital output.Available MachinesVAC-600H, VAC-1000, SPF-200A, StitchLiner5500
VAC-1000 (20 bins)+HOF-30+SPF-200A+FC-200A
Document Finisher
ColorWorks
The ColorWorks is an entry level all-in-one document finisher. The ColorWorks connect in-line with Xerox DocuColor 5000 digital color presses.*XEROX is a trademark of XEROX CORPORATION.
In-Line Solution
Near-Line Solution
ColorWorks
In-line Saddle-Stitcher
StitchLiner6000 Digital
The Stitchliner6000-Digital features uniquely designed sheet trans-portation technology and rigid machine construction achieves consis-tent high speed production at 6,000 booklets per hour. Cover feeder can be used as sheet inserter as option so that additional offset printed or color printed sheet can be inserted in any section of the booklet.
AF-566F+T-564F+DIF-56
CCD Camera
CDD-HOFImage detection for the top sheet. Two CCD cameras are available for the HOF-30.Available MachinesHOF-30
Document Finisher
ColorWorks Pro Plus
The ColorWorks Pro Plus is an all-in-one in-line document finisher that combines, bleed trimming, channel scoring, stitching, folding, face trimming and stacking. The ColorWorks Pro Plus connects in-line with Xerox Color 800/1000 Presses and DocuColor 8080.*XEROX is a trademark of XEROX CORPORATION.
Near-line Bookletmaker
SF-100 / CW-8000NL
The CW-8000NL is an all-in-one near line bookletmaker that com-bines, bleed trimming, channel scoring, stitching, folding, face trim-ming and stacking. Professionally finished documents are produced without any need for further post processing. A mark sensor is equipped as standard to support variable data applications with full integrity.
SF-100+CW-8000NLHigh Speed Off-line Feeder
HOF-400The HOF-400 superior feeding performance and modular concept design enables flexible booklet production for digital printed output.Available MachinesSPF-200A, StitchLiner5500
FC-200A+SPF-200A+AC-400+CR-400+CF-400+HOF-400
StitchLiner5500+AC-400+CF-400+HOF-400
Cover Feeder Module
CF-400Deep pile cover feeding module with 200mm (7.8”) pile height.Available MachinesHOF-400
Accumulating Module
AC-400Accumulating module which maximize the production speed.Available MachinesHOF-400
Bleed Crease Module
CR-400Bleed trimming and creasing module which trim off the bleeds and crease on the center for efficient production and high quality finish.Available MachinesHOF-400
8 9
GRAPHIC ARTS PRODUCTSC
AB
SFolders
Collators
StitchersB
indersC
uttersO
thersD
igital Finishing
Folders
Computerized Cross Folder
AFC-746S / AFC-746D B1 size
The AFC-746S/746D is equipped with 6 buckles and 2 cross knives. The 10.4 inch large color touchscreen provides for user-friendly op-eration. Combination with 6 parallel buckles, 1st cross knife, 1 buckle under knife, and 2nd cross knife performs wide variety foldings. AFC-746D is available as a GS certified model.
Pallet FeederThe Pallet Feeder provides easier sheet handling for operator. The stacked pallet from the press can be attached at the feeding section of the folder.Available MachinesAFC-746F, AFC-746S/746D, AFC-744A/744S
Computerized Cross Folder
AFC-744A / AFC-744S B1 size
The AFC-744A/744S is a 4KTTL folder. The AFC-744A/744S can setup 14 fold patterns, including 16-page cross fold and 8-page cross fold, by selecting the desired fold pattern and inputting the sheet size on the 10.4 inch color touchscreen. All settings can be done through the large and interactive icon-based touchscreen for user-friendly operation and quick change-over. The AFC-744S has additional automation including knife stopper fine adjustment and buckle under knife.
Flat Pile FeederMaximum Pile Height is 750 mm (29.5”).Available MachinesAFC-746F, AFC-746S/746D, AFC-744A/744S
Round Pile Feeder
Top loading round pile feeder archives continu-ous operation for longer run production.Available MachinesAFC-746F, AFC-746S/746D, AFC-744A/744S
Computerized Cross Folder
AFC-566FG B2 size
The AFC-566FG is fully automated folding machine equipped with 6 buckles, 1 cross knife, and 2 buckles under knife. All necessary settings including roller gap adjustment can be performed through the 10.4 inch color touchscreen display.
Computerized Cross Folder
AFC-566A B2 size
The AFC-566A computer-controlled folder combines superior feed-ing and registration with color touchscreen control. An operator can select from 17 pre-set folds or set up to 200 custom folds, all with touchscreen ease. The AFC-566A can handle a wide range of papers at belt speeds up to 230 m (754 ft)/min.
Computerized Cross Folder
AFC-564A B2 size
The AFC-564A computer-controlled folder combines superior feed-ing and registration with color touchscreen control. An operator can select from 14 pre-set folds or set up to 200 custom folds, all with touchscreen ease. The AFC-564A can handle a wide range of papers at belt speeds up to 230 m (754 ft)/min.
Cross Folder
AFC-492 with Safety Cover B3 size
The AFC-492 is a heavy-duty floor model folder with 2-buckle+1-cross knife folder.
AFC-746S with Round Pile Feeder+MKU-CU+MKU-54
AFC-744A with Flat Pile Feeder
AFC-566FG
AFC-566A+PST-40
AFC-492 with Safety Cover
Computerized Cross Folder
AFC-746F B1 size
The AFC-746F features Intelligent automation. All sections, including the buckle plates, roller gaps, and suction heads, can be adjusted by inputting the paper size and fold pattern through the 10.4 inch large color touchscreen. It takes only a couple of minutes to finish the changeover from 16-page B1 format signatures to 16-page B2 format signatures.
Folders
AFC-746F with Pallet Feeder+PSX-56
Cross Folder
AF-762KL / AF-762KLL B1 size
The AF-762KLL has 2 parallel fold buckles and 3 cross knives. 8-page, 16-page, and 32-page section folding are processed with high precision.
Round Pile Feeder
The Round Pile Feeder can feed a wide range of sheets including prefolded, preperforated or prepunched sheets.Available MachinesAF-762KL/KLL
Flat Pile FeederThe feed table automatically descends for sheet loading to maintain proper distance between the top of piled sheets and the feed rotor.Available MachinesAF-762KL/KLL
AF-762KLL with Flat Pile Feeder
Cross Folder
AF-762KLS B1 size
The AF-762KLS has 2 parallel fold buckles and 2 cross knives.8-page and 16-page section folding are processed with high preci-sion. Each stack is pressed and bundled at built in bundling system for efficient production.
AF-762KLS with Pallet Feeder
10 11
GRAPHIC ARTS PRODUCTSC
AB
SFolders
Collators
StitchersB
indersC
uttersO
thersD
igital Finishing
Image Checking SystemThis Image Checking System option for AFC folders enables sheet-by-sheet verification -- reading from the top, bottom, or both -- to insure 100% integrity of folded signatures inside and out. Available MachinesAFC-746F, AFC-746S/746D, AFC-744A/744S, AFC-566FG, AFC-566A, AFC-564A, AF-566T4F
Folders
Buckle Folder
AF-566T4F
The AF-566T4F is a fully automated buckle folder with 6+4 buckle modular stations. Make-ready time is dramatically reduced by intuitive color touchscreen operation and advanced automated setup includ-ing roller gap setting.
Round Pile Feeder Unit
RFU-54The RFU-54 can be attached to the folder without removing the flat pile feeding table.Available MachinesAFC-566FG, AFC-566A, AFC-564A, AFC-546A, AFC-544A, AF-544, AF-566T4F
Press Stacker
PST-40The PST-40 provides efficient folding operation. The height of the press unit is adjusted by the remote controller.Available MachinesAFC-746F, AFC-746S/746D, AFC-744A/744S, AF-762KL/KLL, AFC-566FG, AFC-566A, AFC-564A, AFC-546A, AFC-544A, AF-544, AF-566T4F, SPF-200A
Mobile Knife Fold Unit
MKU-54The MKU-54 is mobile knife unit which is available as the second / third knife unit. Knife unit reverse function provides flexibility to choose fold-up or fold-down.Available MachinesAFC-746F, AFC-746S/746D, AFC-744A/744S, AF-762KL/KLL, AFC-566FG, AFC-566A, AFC-546A, AFC-564A, AFC-544A, AF-566T4F
Mobile Knife Fold Unit
MKU-54TThe MKU-54T is mobile knife unit which is available as the second / third knife unit. Two buckles below knife can be attached on the MKU-54T. (One buckle is standard.)Available MachinesAFC-746F, AFC-746S/746D, AFC-744A/744S, AF-762KL/KLL, AFC-566FG, AFC-566A, AFC-546A, AFC-564A, AFC-544A, AF-566T4F
RFU-54
PST-40
MKU-54 MKU-54T
AF-566F+T-564F
Press Stacker
PSX-56 / PSX-56RThe PSX-56/56R provides efficient non-stop production with consis-tent and high quality stacking. 2-up application can be stacked.Available MachinesAFC-746F, AFC-746S/746D, AFC-744A/744S, AF-762KL/KLL, AFC-566FG, AFC-566A, AFC-564A, AFC-546A, AFC-544A, AF-544, AF-566T4F, AF-566F Digital, StichLiner5500, StitchLiner6000, StitchLiner6000 Digital
PSX-56
Folders
Gluing Unit
CGU-50+CGU-K74 / CGU-50+CGU-K56Folding, gluing, and edge trimming operations are performed ef-ficiently.
Gluing Unit Controller
Gluing
Gate Fold Buckle
GFB-74The gate fold buckle can be set up quickly, with no special skills for precise, accurate closed-gate folding. Available MachinesAFC-746F, AFC-746S/746D, AFC-744A/744S,
Gate Fold Buckle
GFB-54N / GFB-56The gate fold buckle can be set up quickly, with no special skills for precise, accurate closed-gate folding. Available MachinesAFC-566FG, AFC-566A, AFC-564A, AFC-546A, AFC-544A
Scoring Navigator
AF-SN56Scoring position can be set easily depending on the fold pattern and sheet size set on the touch panel. Fine-adjustment or specific setup is memorized with a unique laser positional memory. Available MachinesAF-566T4F
Buckle Folder
AF-406T6A
The AF-406T6A is an automated buckle folder. The AF-406T6A fea-tures unique modular system... 6 buckles on 1st station and 6 buck-les on 2nd station can be combined. Even concertina fold and DL fold can be performed easily.
AF-406A+T-406A+BG-406+ED-40
Mobile Knife Unit
KTU-40 A broad range of applica-tions can be handled with the mobile knife unit.Available MachinesAF-406T6A
Press Stacker
PR-40 High performance press stacker ensures crisp tight folds.Available MachinesAF-406T6A
AF-406T6A+KTU-40+KTU-PL+KTU-KB
AF-406T6A+PR-40+ED-40
Gate Fold Buckle
GFB-40Up to a 25 mm (1”) width of closed gate folding can be produced. Available MachinesAF-406T6A
Reversing Buckle Chute
RB-40The RB-40 can be installed instead of the 6th buckle in the 1st or 2nd station. Available MachinesAF-406T6A
13
GRAPHIC ARTS PRODUCTSC
AB
SFolders
Collators
StitchersB
indersC
uttersO
thersD
igital Finishing
12
CollatorsFoldersCreaser and Folder
CRF-362The CRF-362 creaser folder has been designed to handle the unique requirements of creasing and folding digital color output across a wide range of light and heavy weight stocks, coated or uncoated. Creasing and folding can be done in one pass for easy and accurate processing of a variety of applications.
Tabletop Folder
PF-39The PF-39 is heavy-duty tabletop friction feed folder with two buckles, capable of folding from 4 pages to gate fold.
PF-39
EF-354+KTU-35+ED-40
Paper Folder
PF-40LThe PF-40L is equipped with 2 buckles to meet a variety of folds. Each section sets-up automatically by simply select sheet size and fold pattern. Fine tune adjustment can be performed at 0.1 mm for accurate folding. Uniquely designed suction rotor feeding is employed to meet high speed production up to 390 sheets per minute, wide range of paper stock can be fed with ease.
PF-40L+MT-40L
Cross-Knife Unit
KTU-35 The KTU-35 is suitable for direct mail folding and is also equipped with perforation and scoring function.Available MachinesEF-354 (SR)
Standing Delivery Unit
ED-354The ED-354 is prepared for small size stack. This stacker has batch count (off-set stack) capability.Available MachinesEF-354 (SR)
Air-Suction Collator
VAC-1000The market-leading VAC-1000 is a 10-bin rotary feed air-suction collator. Expandable up to 6 modules to form a 60-bin collating system. The VAC-1000 features a user-friendly touch-screen control console, remote control and superior collating performance.
Air-Suction Collator
VAC-600HThe VAC-600H is modular vertical suction-feed collator expandable up to 6 towers, forming 36 feed bins. It features a field proven suc-tion feed mechanism and an advanced programming features. Each bin has 130 mm (5.1”) pile height capacity.
Friction Collator
SAC-150The SAC-150 is a 15-bin friction-feed collator. The collating system can be expanded up to 4 towers for a maximum of 60 bins. And a computer-assisted programming system provides three highly productive collating modes (Double Cycle, Dual Cover Feed, and Combined Mode).
VAC-600H (36 bins)+ST-60+PJ-77R
SAC-150 (60 bins)+ST-60
Standing Delivery Unit
ED-40 The ED-40 is prepared for pharmaceutical folding.Available MachinesAFC-544A, AFC-546A, AF-406T6A, EF-354+KTU-35
FoldersC
ollators
CRF-362
VAC-1000 (60 bins)+ST-20+PJ-77R
AF-406T6A+PR-40+ED-40
Suction Paper Folder
EF-354 (SR) / EF-35 (SR)The EF-35 has 2 buckles and the EF-354 has 4 buckles. The compact design incorporates a top-load/bottom-feed system, self-compensating combination fold rollers, and a space-efficient variable speed delivery.
SR: Steel & Rubber Folding Roller Version.
EF-35
14 15
GRAPHIC ARTS PRODUCTSC
AB
SFolders
Collators
StitchersB
indersC
uttersO
thersD
igital Finishing
CollatorsFriction Collator
HAC-120This modular 12-bin friction collator features a number of system expansion options such as criss-cross receiving tray, off-set stacker, jogger, and bookletmaker.
Suction Collator
TAC-8The TAC-8 is an 8-bin air-suction collator suitable for collating large formats (A2 / 19” x 25”) for applications such as calendars. Sustained performance and reliability will improve your collating productivity.
HAC-120 (48 bins)+ST-20
TAC-8 (16 bins)
Collators
Sub Accumulator
SA-40The SA-40 sub accumulator temporarily accumulates the sheets delivered from the collator and stabilizes the sheet jog for the stitcher for quality bookletmaking. Also the SA-40 improves the sheet jog for the ST-40 bypass stacker.Available MachinesVAC-1000, VAC-600H, SPF-200A, StitchLiner5500
Bypass Conveyor
BC-20The BC-20 is available for SPF-20 and StitchLiner5500 connection. Switching over from bookletmaking to stacking with CCR / CCR-DX or PJ-75 / PJ-77 without configuration change.Available MachinesVAC-1000, VAC-600H, SPF-200A, StitchLiner5500
Bypass Stacker
ST-40The ST-40 bypass stacker can be operated on-line with SPF-20, SPF-200A, and StitchLiner5500 bookletmakers. Two different jobs (bookletmaking or stacking) can be chosen by a switch on the ST-40.Available MachinesVAC-1000, VAC-600H, SAC-150, SPF-200A, StitchLiner5500
Tandem Stacker
ST-60The ST-60 is an off-set receiving stacker with tandem pallets for high-speed collation. The tandem stacker and error reject function provide an absolute minimum of system stops.Available MachinesVAC-1000, VAC-600H, SAC-150
Criss-Cross Receiving Tray
CCR / CCR-DXThe Criss-Cross Receiving Tray swings 90 degrees at each collating interval, clearly separating, the collated sets.Available MachinesVAC-1000, VAC-600H, SAC-150, HAC-120
Off-set Stacker
ST-20 / ST-20RThe Off-set Stacker Receiving Tray shifts each collated set laterally, separating the collated sets.Available MachinesVAC-1000, VAC-600H, SAC-150, HAC-120
Paper Jogger
PJ-75 / PJ-77 / PJ-77RDriven by an independent motor, the paper jogger vibrates collated sheets into perfect alignment; even NCR paper can be well jogged.Available MachinesVAC-1000, VAC-600H, SAC-150, HAC-120
Image Checking System
IC-VAC600HThe CMOS camera is housed in a transporting section of the collator for space efficiency.Longer lasting high intensity white LEDs are employed for capturing image precisely.Available MachinesVAC-600H
BC-20+CCR-DX
ST-40+ST-CV
CMOS camera
17
GRAPHIC ARTS PRODUCTSC
AB
SFolders
Collators
StitchersB
indersC
uttersO
thersD
igital Finishing
16
StitchersSaddle-stitching System
StitchLiner6000
The StitchLiner6000 produces professional finished booklets at speed 6,000 booklets per hour. The icon-based color touchscreen is equipped for intuitive operation and quick make-ready. A newly designed VAC-80S, landscape feeding collator and straight saddle-stitching flow allows a wider range of paper stocks and applications. Expandable up to 4 towers to form a 32-bin collating system.
VAC-80S (16 bins)+IFU-30S+ACF-30S+SPF-30S+HTS-30S+TB-30
Stitchers
VAC-1000 (20 bins)+ST-CV+ST-40+ACF-30+SPF-30S+HTS-30S+TB-30+IM-30
Paper Inserter
IM-30The IM-30 is optional paper inserter for the StitchLiner5500 or SPF-200A. Minimize human intervention by inserting the sheet automati-cally. Up to three sheets can be inserted to the middle or the top page of a booklet.Option: IM-BC: Bypass Conveyor for normal booklet making. IM-CC: Connecting Conveyor for SPF-200A. IM-SD: Insert Error Detector only for top page insertion.Available MachinesSPF-200A, StitchLiner6000, StitchLiner5500
VAC-600H (12 bins)+IC-VAC600H+IFU-200+SPF-200A+FC-200A+IM-CC+IM-30
Saddle-stitching System
StitchLiner5500
The StitchLiner5500 can produce tight fold booklets from 2 to 50 sheets. The icon based touchscreen simplifies operation and the job changeover is fully automated. Also the three-knife trimmer section produces neatly finished booklets.
VAC-600H (36 bins)+HOF-30+ACF-30+SPF-30S+HTS-30S+TB-30
Image Checking System
CCD-VAC80SThe 10.4” color touchscreen is equipped for unique image checking system. Loading error is detected on each bin for maximum quality control.Available MachinesVAC-80S
Stitching HeadStandard stitcher head (#23 to #25 - thickness: 0.6 mm to 0.5 mm) and optional stitcher head (#25 to #27 - thickness: 0.5 mm to 0.4 mm) are available. Additional stitcher heads are available for up to 4 stitches per booklet with mounting block B-30S.* 3 stitches are available as factory option with mounting
block B-30C.
Available MachinesStitchLiner5500, StitchLiner6000
Loop Stitching KitAn optional loop stitching kit can be fitted to the standard stitcher heads to meet varying customer needs.Available MachinesStitchLiner5500, StitchLiner6000
Hole Punch Device
HP-05 / HP-065 mm (HP-05) or 6 mm (HP-06) hole punch device provides 2 punch holes for A4 booklet. Precise hole punching is performed in-line for efficient production.Available MachinesStitchLiner5500, StitchLiner6000
Center-Cut Device
CC-06 / 1/4 / 08 / 10 / 12Two-up production utilizing the center knives.CC-06: 6 mm (0.24”) (Max. book thickness: 3 mm / 0.12”)CC-1/4: 6.35 mm (0.25”) (Max. book thickness: 3 mm / 0.12”)CC-08: 8 mm (0.31”) (Max. book thickness: 4 mm / 0.16”)Special OrderCC-10: 10 mm (0.39”) (Max. book thickness: 5 mm / 0.20”)CC-12: 12 mm (0.47”) (Max. book thickness: 6 mm / 0.24”)* Max. book thickness varies depending on booklet size and paper condition.
Available MachinesStitchLiner5500, StitchLiner6000
Preset Kicker
PK-30According to a preset number input on the touchscreen, a booklet is skewed to identify and separate the end of a series.Available MachinesStitchLiner5500, StitchLiner6000
Thickness Detector
HTS-TDThe HTS-TD is installed at fore-edge trimming section and checks the thick-ness of each booklet. In case of missing section or double sections, system stops for maximum quality control.Available MachinesStitchLiner5500, StitchLiner6000
6-page Fold Program
SLRom6P6-page fold sheet can be inserted to a book with simple operation. 6-page fold sheet can be collated wherever in the booklet by the combination of 6-page fold and block feed program. Available MachinesStitchLiner5500
18 19
GRAPHIC ARTS PRODUCTSC
AB
SFolders
Collators
StitchersB
indersC
uttersO
thersD
igital Finishing
StitchersNew Generation Bookletmaker
SPF-200A / FC-200A
The SPF-200A / FC-200A is equipped with the 10.4 inch color touchscreen for user-friendly operation. Fold roller gap changeover is automated. The error reject tray and hand marrying tray are built-in to produce perfectly finished booklets.
PJ-77R+VAC-1000 (20 bins)+ST-CV+ST-40+SPF-200A+HP-200A+FC-200A
SPF-8
Stitchers
Stapler
SPF-8The SPF-8 is a stapling and folding machine capable of folding, top and corner-stapling. The SPF-8 produces professional quality fin-ished booklets.
High-speed Bookletmaker
SPF-200L / FC-200LThe SPF-200L / FC-200L features A4 (8.5X11”) Landscape booklet production. The system equipped with 10.4” color touch-screen for userfriendly operation. Fold roller gap change over automated. The error reject tray and hand marring tray are built-in to produce perfectly finished booklets.
Corner Stitcher
SP-1The SP-1 is a corner stitcher for Horizon collator models.
Hole Punch Unit
HP-200AThe HP-200A can be attached to the SPF-200A / FC-200A. The HP-200A can make either 2 or 4 holes by ease of settings.Available MachinesSPF-200A, FC-200A
SP-1
VAC-1000 (10 bins)+SPF-CV+SPF-200L+FC-200L
Side/Corner Stitch Kit
SSK-200 / SSK-200LThe SSK-200/200L enables the SPF-200A/200L to perform Side/Corner stitching.Available MachinesSPF-200A, SPF-200L
Four Stitching Unit
FST-200Additional stitcher heads can be mounted for up to 4 stitches per booklet.Available MachinesSPF-200A, SPF-200L
Preset Kicker
PK-200According to a preset number input on the touchscreen, one booklet is skewed to easily identify and separate the end of a series.Available MachinesSPF-200A, FC-200ASPF-200L, FC-200L
Booklet Thickness Detector
TD-200The TD-200 checks the thickness of each booklet. An errored book is rejected to the reject tray for non-stop operation.Available MachinesFC-200A, FC-200L
Long Conveyor
LC-200The LC-200 is a long conveyor for quan-tity production. This conveyor gives you enough time for packing of the booklets.Available MachinesSPF-200A, FC-200ASPF-200L, FC-200L
Loop Stitching KitAn optional loop stitching kit can be fitted to the standard stitching heads.Available MachinesSPF-200A, FC-200ASPF-200L, FC-200L
Mis-Stitch Detector
SDS-200The SDS-200 checks the stitch on each booklet for higher quality control.Available MachinesSPF-200A, SPF-200L
Paper Insertion Knife Unit
PN-200The PN-200 inserts a single sheet into the center spread of a booklet.Available MachinesSPF-200A, SPF-200L
20 21
GRAPHIC ARTS PRODUCTSC
AB
SFolders
Collators
StitchersB
indersC
uttersO
thersD
igital Finishing
Binders4-Clamp Binder
BQ-470
The BQ-470 provides simple operation through automated setup and superior quality from the first book to the last. The 10.4 inch color touchscreen is employed to maximize ease of operation. The BQ-470 also features an interchangeable glue tank, for both EVA and PUR adhesives. Flap cover model is available as BQ-470VFC with 6 scor-ing rollers.
Single-Clamp Binder
BQ-270V
The BQ-270V is a feature-rich fully-automated perfect binder for ease-of use, book quality, and production efficiency. The BQ-270V is designed for variable binding production of up to 500 cycles per hour, featuring an intelligent touchscreen control console. Flap cover model is available as BQ-270VFC with 6 scoring rollers.
BQ-470
BQ-270V
Single-Clamp Binder
BQ-160 / BQ-160PURThe BQ-160 produces three type of binding: perfect binding, tape binding, and padding. Professional quality books are produced with simple procedure through intuitive touchscreen.
BQ-160
Binders
Impact Creaser
CRB-160 / CRS-36The CRB-160 is a cover creaser that communicates with BQ-160 binder. Even heavy-weight cover stock can be used to build crisp, clean and tight books. Creasing position is automatically set accord-ing to the book thickness inserted into the BQ-160.CRS-36....Stand alone modelAvailable MachinesBQ-160 / BQ-160PUR
BQ-160+CRB-160
CRS-36
Fume Extraction
VS-160Optional fume extraction blower can be equipped for clean and com-fortable operation. Extraction hood is equipped as standard for easy arrangement of evacuation at shop floor.Available MachinesBQ-160, BQ-160PUR
Smoke Extractor Kit
VSK-160Extraction hood and hose for fume extraction.(Blower not included)Available MachinesBQ-160
EVA PUR
MU-470EVA [Selection] MU-470 PUR (Open drum)
*Melt tank unit is to be selected either MU-470EVA or MU-470 PUR or both of them.
PUR Single-Clamp Binder
BQ-280PUR
The BQ-280PUR is a feature-rich fully-automated PUR perfect binder for ease-of use, book quality, and production efficiency. Milling section, glue tank, nipping section and delivery are considered to produce PUR book production. Variable thickness book production is achieved with built-in thickness caliper at 500 cycles per hour. Flap cover model is available as BQ-280PURFC with 6 scoring rollers.
BQ-280PUR
22 23
GRAPHIC ARTS PRODUCTSC
AB
SFolders
Collators
StitchersB
indersC
uttersO
thersD
igital Finishing
Cutters Programmable Hydraulic Cutter
APC-61II / APC-61II SB
The APC-61II provides highly accurate cutting, durability, and simple operation. No special skills are required to operate the APC-61II, with its user-friendly touchscreen display and conveniently positioned, simple-to-use controls.
Paper Cutter
PC-64II with Safety Cover
The PC-64II electric cutter is suitable for handling small volume jobs at in-plants or copy shops.
Paper Cutter
PC-45 with Safety Cover
The PC-45 electric cutter has a cutting width of 446 mm (17.5”). Suitable for handling small volume jobs at in-plants or copy shops.
One Knife Three-side Trimmer
HT-30C
The HT-30C is the one knife three-side trimmer for books-on-de-mand. The HT-30C features automated job setups and changeover to enable efficient just-in-time book production. The HT-30C can be connected to the Horizon perfect binder to form a true books-on-demand system.
HT-30C APC-61IISB
APC-64II with Safety Cover PC-45 with Safety Cover
Cutters
Three-knife Trimmer
HT-80
The HT-80 three-knife trimmer features automated setup so that most trimmer sections can be set up automatically by inputting the untrimmed size and finished size into the intuitive color touchscreen. System can be in-line with BQ-470 perfect binder for efficient book production.
HT-80+HR-80
Variable Trimming Device
V-30S Barcoded books placed on the feed table are read, then the HT-30C automatically changes-over to the indicated size before trimming begins.Available MachinesHT-30C
Variable Trimmer
HT-1000V
The HT-1000V Variable Three-knife Trimmer for true on demand book production of variable sizes. The trimmer operates in-line with Horizon perfect binders or off-line to deliver a wide range of input and output sizes for completely variable production. Setup and variable trimming are achieved automatically by reading a barcode printed on the cover sheet of each book at the entrance of the trimmer, with no operator input required. The system trims up to 1000 books of vari-able thickness and format size per hour and will accept a broad range of input sizes and deliver trimmed books.
HT-1000V Smart Book SolutionAF-566F Digital+PSX-56 / BQ-470+HT-1000V
24 25
GRAPHIC ARTS PRODUCTSC
AB
SFolders
Collators
StitchersB
indersC
uttersO
thersD
igital Finishing
Specifications
CA
BS
Model CABS6000 CABS4000S Model MG-600 Model HT-110
Max. Book Size 385W x 275H mm (15.1”W x 10.8”H) 400W x 280H mm (15.7”W x 11.0”H) Max. Sheet Size 385W x 275L mm (15.1”W x 10.8”L) Max. Trimmed Book Size * 366 x 300 mm (14.40" x 11.81")
Min. Book Size 148W x 105H mm (5.9”W x 4.2”H) 148W x 105H mm (5.9”W x 4.2”H) Min. Sheet Size 148W x 105H mm (5.9”W x 4.2”H) Min. Trimmed Book Size * 145 x 103 mm (5.71" x 4.06")
Book Thickness 2 to 50 mm (0.08” to 1.9”) 1 to 45 mm (0.04” to 1.7”) Bin Pile Height Max. 50 mm (1.9”) Trim Thickness Max. 100 mm (3.9”)
Production Speed 6,000 books/hr. 4,000 books/hr. Production Speed 6,000 sets/hr. Production Speed 1,600 cycles/hr.
Model SB-07 Model HAL-4 * Top-Bottom x Fore-Edge
Max. Book Size 400W x 320H mm (15.7”W x 12.5”H)Sheet Size Post Card to A4 (8.5” x 11”)
Max. 260 x 330 mm (10.2” x 12.9”)Min. Book Size 135W x 105H mm (5.4”W x 4.2”H)
Book Thickness 2 to 45 mm (0.08” to 1.7”) Sheet Weight Range Min. 53 gsm
Cycle Speed 3,200 cycles/hr. Production Speed 3,600 sets/hr.
Max. Cover Size
Model StitchLiner6000 Digital Model AF-566F Digital Model ColorWorks Pro Plus ColorWorks
Max. Sheet Size 350W x 500L mm (13.7”W x 19.6”L) Max. Sheet Size 520.7W x 865L mm (20.5”W x 34.0”L) Digital Press Color 800/1000 Presses, DC8080 DC5000
Min. Sheet Size 210W x 279.4L mm (8.3”W x 11.0”L) Min. Sheet Size 161.5W x 230L mm (86.4”W x 9.1”L) Max. Sheet Size 320 x 458 mm (12.6” x 18.0”) 320 x 458 mm (12.6” x 18.0”)
Stitch Thickness Max. 5 mm (0.19”) Max. Pile Height 740 mm (29.1")Min. Sheet Size 182 x 257 mm (7.2” x 10.1”) 182 x 257 mm (7.2” x 10.1”)
Booklet Thickness Max. 20 sheets (90 gsm Coated) Max. 20 sheets (90 gsm Coated)
Production Speed 6,000 booklets/hr. Belt Speed 30 to 240 m (98 to 787 ft)/min. Sheet Weight Range 64 to 250 gsm 64 to 250 gsm
Model SF-100 / CW-8000NL Model HOF-400 Model HOF-30
Booklet Sheet SizeMax. 320W x 458L mm (12.6”W x 18.0”L) Max. Sheet Size 356(W) x 610(L) mm (14.0” x 24.0”) Max. Sheet Size 350W x 500L mm (13.7”W x 19.6”L)
Min. 182W x 257L mm (7.2”W x 10.1”L) Min. Sheet Size 203(W) x 203(L) mm (8.0” x 8.0”) Min. Sheet Size 200W x 275L mm (7.9”W x 10.9”L)
Sheet Weight Range 64 to 250 gsmSheet Pile Height
Sheet Feed Section: Max. 620 mm (24.4”)Feed Tray Pile Height Max. 430 mm (16.9”)
Stitch Thickness 25 sheets (90 gsm Coated) Cover Feed Section: Max. 200 mm (7.8”)
Production Speed 10 sheet booklet 210 books / hr. (WithouScoring) Production Speed Max. 35,000 sheets/hr. (A4 Portrait) Production Speed 27,000 sheets/hr.
Others
Spine Taper
GMS-7 The GMS-7 spine taping machine features bottom feed, sensor-con-trolled spine length gauging, and simple and quick makeready.
Paper Jogger
PJ-100The PJ-100 air-assist paper jogger features a tilt-away jogging head, allowing you to set the system in either the vertical or horizontal position, depending on size and type of sheets.
Others
PJ-100
GMS-7
Case Binding System
HCM-1 Case-Making Machine / HCP-1 Case-In Machine
Entire case binding process can be done at the push of a button. Original casebound book is completed with a specially prepared and printed cover.
Case Binder
HCB-2
The HCB-2 is the On Demand case binding system designed with an ergonomic concept to increase productivity and efficiency. It features simple setup and operation, advanced automation and higher produc-tivity.
HCM-1
HCP-1
HCB-2
Perforator
VP-66 The VP-66 is a straight perforator capable of handling larger sheets up to 655 x 655 mm (25.7” x 25.7”).
Perforator
VP-53 The VP-53 is a straight perforator capable of perforating up to 10,000 sheets/hr. Optional scoring and slitting blade are available.
Skip Perforation Unit
JM-66 for VP-66 / JM-53 for VP-53 Start and finish perforation points can be setup in 1 mm unit for best perforating accuracy. Up to 4 skip perfora-tion unit can be attached.
VP-66 VP-53
Operation Console Perforation Unit
Barcode Verification System
HCB-2BC Optional barcode verification system ensures the cover and book block match to eliminate costly errors.Available MachinesHCB-2
Heat Press
BP-2 The case and book block are heat-pressed with optional BP-2 heat press unit to form the complete book.Available MachinesHCB-2
26 27
GRAPHIC ARTS PRODUCTS
Specifications
Folders
Model AFC-746F * AFC-746S / 746D /744A / 744S* AF-762KL / AF-762KLL * AF-762KLS with Pallet Feeder AFC-566FG
Max. Sheet Size 760W x 1,100L mm (29.055”W x 43.310”L) 760W x 1,100L mm (29.055”W x 43.310”L) 760W x 1,100L mm (29.920”W x 43.310”L) 760W x 1,100L mm (29.920”W x 43.310”L) 558W x 850L mm (21.965”W x 33.460”L)Min. Sheet Size 210W x 210L mm(8.270”W x 8.270”L) 210W x 210L mm(8.270”W x 8.270”L) 210W x 210L mm(8.270”W x 8.270”L) 210W x 210L mm(8.270”W x 8.270”L) 128W x 148L mm (5.040”W x 5.830”L)Max. Pile Height 750 mm (29.5”) 750 mm (29.5”) 750 mm (29.5”) 750 mm (29.5”) 740 mm (29.1”)Belt Speed 30 to 240 m (98 to 787 ft)/min. 30 to 230 m (98 to 754 ft)/min. 30 to 240 m (98 to 787 ft)/min. 30 to 240 m (99 to 787 ft)/min. 30 to 240 m (98 to 787 ft)/min.* with Flat Pile Feeder
Model AFC-566A AFC-564A AFC-492 / AFC-492SC AF-566T4F AF-406T6A
Max. Sheet Size 558W x 850L mm (21.965”W x 33.460”L) 558W x 850L mm (21.965”W x 33.460”L) 490W x 648L mm (19.3”W x 25.5”L) 558W x 865L mm (21.970”W x 34.000”L) 400W x 650L mm (15.748”W x 25.590”L)Min. Sheet Size 128W x 148L mm (5.040”W x 5.830”L) 128W x 148L mm (5.040”W x 5.830”L) 105W x 174L mm (4.2”W x 6.9”L) 128W x 148L mm (5.040”W x 5.830”L) 50W x 100L mm (1.968”W x 3.937”L)Max. Pile Height 740 mm (29.1”) 700 mm (27.5”) 590 mm (23.2”) 740 mm (29.1”) 500 mm (19.6”)Belt Speed 30 to 230 m (98 to 754 ft)/min. 30 to 230 m (98 to 754 ft)/min. 30 to 130 m (98 to 426 ft)/min. 30 to 240 m (98 to 787 ft)/min. 350 to 180 m (164 to 590 ft)/min. (Belt Speed)Model RFU-54 PST-40 PSX-56 / PSX-56R MKU-54 MKU-54T
Max. Sheet Size 540W x 880L mm (21.25”W x 34.64”L) Max. 440 mm (17.3”) 546W x 330L mm (21.49”W x 12.99”L) 540W x 330L mm (21.2”W x 12.9”L) 538W x 350L mm (21.1”W x 13.7”L)Min. Sheet Size 148W x 148L mm (5.83”W x 5.83”L) Min. 64 mm (2.5”) 128W x 92L mm (5.04”W x 3.63”L) 160W x 100L mm (6.3”W x 34.0”L) 165W x 80L mm (6.5”W x 3.2”L)Belt Speed 50 to 230 m/min. 230 m/min. (Depends on fold device.) 900 stacks/hr. 50 to 240 m/min. 50 to 180 m/min.Model CRF-362 EF-354 / EF-354SR EF-35 / EF-35SR PF-40L PF-39
Max. Sheet Size 364W x 865L mm (14.33” W x 34.00”L) 350W x 650L mm (13.7”W x 25.5”L) 350W x 500L mm (13.7”W x 19.6”L) 320W x 630L mm (12.59”W x 24.80”L) 365W x 610L mm (14.37”W x 24.01”L)Min. Sheet Size 105W x 180L mm (4.14” Wx 7.09”L) 55W x 70L mm (2.2”W x 2.8”L) 55W x 70L mm (2.2”W x 2.8”L) 125W x 128L mm (4.93”W x 5.04”L) 90W x 128L mm (3.55”W x 5.04”L)Max. Pile Height 150mm (5.90”) Normal Paper 40 mm (1.5”) Normal Paper 40 mm (1.5”) 105 mm (4.1”) 30 mm (1.1”)
Production Speed 5,000 sheets/hr(A4 / one creasing line and fold) 30,000 sheets/hr. (A4 Single Fold) 30,000 sheets/hr. (A4 Single Fold) 390 sheets/min. (A4 Single Fold) 350 sheets/min. (A4 Single Fold)
Collators
Model VAC-1000 VAC-600H SAC-150 HAC-120 TAC-8
Max. Sheet Size 350W x 500L mm (13.7”W x 19.6”L) 350W x 500L mm (13.7”W x 19.6”L) 297W x 420L mm (11.6”W x 16.5”L) 318W x 470L mm (12.5”W x 18.5”L) 470W x 636L mm (18.5”W x 25.0”L)
Min. Sheet Size 148W x 148L mm (5.9”W x 5.9”L) 120W x 148L mm (4.8”W x 5.9”L) 148W x 210L mm (5.9”W x 8.3”L) 148W x 210L mm (5.9”W x 8.3”L) 148W x 210L mm (5.9”W x 8.3”L)
Bin Pile Height Max. 55 mm (2.1”) Max. 130 mm (5.1”) Max. 40 mm (1.5”) Max. 40 mm (1.5”) Max. 90 mm (3.5”)
Production Speed 5,000 sets/hr. (A3 : 20 bins) 5,500 sets/hr. (A3 : 12 bins) 6,500 sets/hr. (A4 : 15 bins) 3,800 sets/hr. (12 bins) 3,200 sets/hr. (8 bins)
Model ST-40 ST-60 ST-20 / ST-20R
Max. Sheet Size 350W x 500L mm (13.7”W x 19.6”L) 350W x 500L mm (13.7”W x 19.6”L) 320W x 450L mm (12.5”W x 17.7”L)
Min. Sheet Size 182W x 128L mm (7.2”W x 5.1”L) 182W x 128L mm (7.2”W x 5.1”L) 128W x 182L mm (5.1”W x 7.2”L)
Stack Pile Height Max. 360 mm (14.1”)Right Tray A : Max. 360 mm (14.1”)
Max. 320 mm (12.5”)Left Tray B : Max. 580 mm (22.8”)
Model CCR / CCR-DX PJ-75 / PJ-77 / PJ-77R Model SA-40 BC-20
Max. Sheet Size 320W x 470L mm (12.5”W x 18.5”L) 320W x 460L mm (12.5”W x 18.1”L) Max. Sheet Size 350W x 500L mm (13.7”W x 19.6”L) Max. Sheet Size 350W x 500L mm (13.7”W x 19.6”L)
Min. Sheet Size 148W x 210L mm (5.9”W x 8.3”L) 128W x 182L mm (5.1”W x 7.2”L)Min. Sheet Size
Accumulate : 140W x 204L mm (5.6”W x 8.1”L) Min. Sheet Size 120W x 148L mm (4.8”W x 5.9”L)
Stack Pile Height Max. 170 mm (6.6”) Max. 110 mm (4.3”) Pass Through : 120W x 148L mm (4.8”W x 5.9”L) Reject Tray Capacity Max. 30 mm (1.1”)
Stitchers
Model StitchLiner6000 StitchLiner5500 Model IM-30
Max. Sheet Size 350W x 500L mm (13.7”W x 19.6”L) 350W x 500L mm (13.7”W x 19.6”L) Max. Sheet Size 220W x 297L mm (8.6”W x 11.6”L)
Min. Sheet Size 140W x 199L mm (5.6”W x 7.9”L) 148W x 199L mm (5.9”W x 7.9”L) Min. Sheet Size 100W x 148L mm (4.0”W x 5.9”L) (A6)
Stitch Thickness Max. 5 mm (0.2”) Max. 5 mm (0.2”) Number of Sheet Inserted Up to 3 sheets
Production Speed 6,000 booklets/hr. 5,500 booklets/hr. Production SpeedIn-line with StitchLiner : 4,000 booklets/hr.
In-line with SPF-200A or Stand-alone : 3,600 booklets/hr.
Specifications
Stitchers
Model SPF-200A / FC-200A SPF-200L / FC-200L
Max. Sheet Size 356W x 508L mm (14.0”W x 20.0”L) 356W x 610L mm (14.0”W x 24.0”L)Min. Sheet Size 120W x 180L mm (4.8”W x 7.1”L) 120W x 180L mm (4.7”W x 7.0”L)Production Speed 4,500 booklets/hr. (A5 Finish) 3,500 booklets/hr (A4-Finish, Landscape)
Model SP-1 SPF-8
Max. Sheet Size 257W x 364L mm (10.1”W x 14.3”L) 320W x 470L mm (12.5”W x 18.5”L)Min. Sheet Size 148W x 210L mm (5.9”W x 8.3”L) 120W x 200L mm (4.8”W x 7.9”L)Stitch Thickness Max. 4 mm (0.15”) Max. 2 mm (0.07”)Production Speed 2,800 booklets/hr. 1,380 booklets/hr. (A5 Finish)
Binders
Model BQ-470 BQ-280PUR BQ-270V BQ-160 BQ-160PUR
Max. Book Size * 320 x 320 mm (12.5” x 12.5”) 385 x 320 mm (15.15” x 15.59”) 320 x 320 mm (12.5” x 12.5”) 350 x 300 mm (13.7” x 11.8”) 350 x 300 mm (13.7” x 11.8”)
Min. Book Size * 145 x 105 mm (5.8” x 4.2”) 135 x 105 mm (5.32” x 4.14”) 135 x 105 mm (5.4” x 4.2”) 70 x 128 mm (2.8” x 5.1”) 70 x 128 mm (2.8” x 5.1”)
Book Thickness Max. 65 mm (2.5”) Max. 51 mm (2.00”) Max. 50 mm (1.9”) Max. 40 mm (1.5”) Max. 40 mm (1.5”)
Cycle Speed 1,350 cycles/hr. 500 cycles/hr. 500 cycles/hr. 180 cycles/hr. 180 cycles/hr.
* Top-Bottom x Fore-Edge
Model CRB-160 / CRS-36
Max. Sheet Size 364W x 650L mm (14.3”W x 25.5”L)
Min. Sheet Size 140W x 180L mm (5.6”W x 7.1”L)
Production Speed 4 sec/sheet
Cutters
Model HT-1000V HT-80 HT-30C
Max. Trimmed Book Size * 350 x 320 mm (13.77” x 12.59”) 300 x 300 mm (11.81” x 11.81”) 305 x 230 mm (12.01” x 9.05”)
Min. Trimmed Book Size * 148 x 105 mm (5.83” x 4.14”) 139 x 99 mm (5.475” x 3.9”) 200 x 134 mm (7.87” x 5.28”)
Trim Thickness Max. 65 mm (2.55”) Max. 51 mm (2.0”) Max. 51 mm (2.0”)
Cycle Speed 1,000 cycles/hr. 1,000 cycles/hr. 200 cycles/hr.
* Top-Bottom x Fore-Edge
Model APC-61II PC-64II PC-45
Cutting Width Max. 610 mm (24.0”) Max. 640 mm (25.1”) Max. 446 mm (17.5”)
Max. Feed Depth 620 mm (24.410”) 640 mm (25.1”) 450 mm (17.7”)
Min. Feed Depth 25 mm (0.985”) 20 mm (0.8”) 20 mm (0.8”)
Cutting Height Max. 100 mm (3.9”) Max. 70 mm (2.7”) Max. 70 mm (2.7”)
Others
Model HCM-1 HCP-1 HCB-2 Model GMS-7
Max. Book Block Size * 297 x 215.9 mm (11.69” x 8.5”) 297 x 215.9 mm (11.69” x 8.5”) 304.8 x 304.8 mm (12.00” x 12.00”) Sheet Length 80 mm (3.1”) or up
Min. Book Block Size * 133.7 x 136.7 mm (5.27” x 5.39”) 133.7 x 136.7 mm (5.27” x 5.39”) 133.7 x 136.7 mm (5.27” x 5.39”) Sheet Width 60 mm (2.4”) or up
Book Block Thickness 3 to 25 mm (0.12” to 0.98”) 3 to 25 mm (0.12” to 0.98”) 3 to 25 mm (0.12” to 0.98”) Spine Thickness Max. 30 mm (1.2”)
Production Speed 40 books/hr. 50 books/hr. 130 books/hr.* Production Speed 4,000 books/hr.
* Top-Bottom x Fore-Edge * Operation with 2 or more people
Model VP-66 VP-53 PJ-100
Max. Sheet Size 655W x 655L mm (25.7”W x 25.7”L) 480W x 480L mm (18.8”W x 18.8”L) 297W x 420L mm (11.6”W x 16.5”L)
Min. Sheet Size 170W x 257L mm (6.7”W x 10.2”L) 128W x 170L mm (5.1”W x 6.7”L) 128W x 182L mm (5.1”W x 7.2”L)
Max. Pile Height 590 mm (23.2”) 200 mm (7.8”) -
Production Speed 15,500 sheets/hr. 10,000 sheets/hr. -
130121/MM/TOTAL12/01E/TV
*The machine design and specifications are subject to change without any notice.
Horizon Company Profile
Horizon International Inc. was founded over 60 years ago in the time-honored and tradition-rich city of Kyoto, Japan. Today, Horizon operates a world-class, ISO 9001 and 14001-certified factory in Biwako, Shiga, Japan, the largest facility in the world manufacturing products for the five major paper finishing operations; folding, collating, binding, stitching, and cutting. Over 500 Horizon employees are dedicated to the design and manufacture of top-quality, highly-reliable finishing products.