Post on 27-Jun-2020
transcript
Installation: Drop-incannot be under mounted
3060VN30" x 60" x 23"
3060VN
3060VN
3060VN
• Before ordering or installing, please consider future access toequipment.• Add bedding compound to fully level and support bottom of tub.• Tubs equipped with an air bath or a pre-leveledfoam base are designed to rest on the floor without beddingcompound, provided the floor is level.• Please measure tub on-site before building tub decking.• Jet, pump & blower locations are predetermined and cannot bechanged.
• Suction and control locations may vary.• Specifications and configurations are subject to change withoutnotice.• Measurements are +1/2" and are subject to change withoutnotice.• Measurements herein supersede all others published prior topublication date shown below.
� OPTIONS� Colors Available - White Biscuit� Quick Ship - reduces lead time - call for availability� Inline Heater with Pump - Whirlpool or Whirlpool and Air� Lift & Turn Drain Kit -Chrome,Brushed Nickel, White� Color Match Jets.
Air jets, Air blower, Textured bottom
IMPORTANT INFORMATION
Whirlpool and Air 3060VNAir jets,Air blower, textured bottom
ELECTRICAL SPECIFICATIONS:Required Electrical Service 110 VoltAir Bath or Whirlpool 1-15 amp GFCIWhirlpool with Inline Heater 1-20amp GFCIWhirlpool and Air 1-20 amp GFCISoaker
GENERAL SPECIFICATIONS:Material AcrylicPlumbed Weight : 160lbs / 73 kgSoaker Weight :130 lbs / 59 kgAverage Fill: 50 gal to above jet level
©2013 by SPA WORLD CORP Modification Rights Reserved.
2
Installation: Drop-incannot be under mounted
3260VN325
8"x 5912" x 23"
3260VN
3260VN
3260VN
• Before ordering or installing, please consider future access toequipment.• Add bedding compound to fully level and support bottom of tub.• Tubs equipped with an air bath or a pre-leveledfoam base are designed to rest on the floor without beddingcompound, provided the floor is level.• Please measure tub on-site before building tub decking.• Jet, pump & blower locations are predetermined and cannot bechanged.
• Suction and control locations may vary.• Specifications and configurations are subject to change withoutnotice.• Measurements are +1/2" and are subject to change withoutnotice.• Measurements herein supersede all others published prior topublication date shown below.
� OPTIONS� Colors Available - White Biscuit� Quick Ship - reduces lead time - call for availability� Inline Heater with Pump - Whirlpool or Whirlpool and Air� Lift & Turn Drain Kit -Chrome,Brushed Nickel, White� Color Match Jets.
Air jets, Air blower, Textured bottom
IMPORTANT INFORMATION
Whirlpool and Air 3260VNAir jets,Air blower, textured bottom
ELECTRICAL SPECIFICATIONS:Required Electrical Service 110 VoltAir Bath or Whirlpool 1-15 amp GFCIWhirlpool with Inline Heater 1-20 amp GFCIWhirlpool and Air 1-20 amp GFCISoaker
GENERAL SPECIFICATIONS:Material AcrylicPlumbed Weight : 160lbs / 73 kgSoaker Weight :130 lbs / 59 kgAverage Fill: 55 gal to above jet level
©2013 by SPA WORLD CORP Modification Rights Reserved.
2
Installation: Drop-incannot be under mounted
3266VN32" x 66" x 23"
• Before ordering or installing, please consider futureaccess to equipment.• Add bedding compound to fully level and support bottomof tub.• Tubs equipped with an air bath or a pre-leveledfoam base are designed to rest on the floor without beddingcompound, provided the floor is level.• Please measure tub on-site before building tub decking.• Jet, pump & blower locations are predetermined andcannot be changed.
• Suction and control locations may vary.• Specifications and configurations are subject to changewithout notice.• Measurements are +1/2" and are subject to changewithout notice.• Measurements herein supersede all others publishedprior to publication date shown below.
OPTIONSColors Available - White BiscuitQuick Ship - reduces lead time - call for availabilityInline Heater with Pump - Whirlpool or Dual BathLift & Turn Drain Kit -Chrome,Brushed Nickel, White
31 air jets, air blower, textured bottom
IMPORTANT INFORMATION
31 air jets, air blower, textured bottom
ELECTRICAL SPECIFICATIONS:Required Electrical Service 110 VoltAir Bath or Whirlpool 1-15 amp GFCIWhirlpool with Inline Heater 1-20 amp GFCIDual Bath 1-20 amp GFCISoaker
GENERAL SPECIFICATIONS:Material AcrylicPlumbed Weight : 160lbs / 73kgSoaker Weight : 130lbs /59kgAverage Fill: 60gal to above jet level
©2013 by SPA WORLD CORP Modification Rights Reserved.
2
Installation: Drop-incannot be under mounted
3272VN32" x 72" x 23"
• Before ordering or installing, please consider futureaccess to equipment.• Add bedding compound to fully level and support bottomof tub.• Tubs equipped with an air bath or a pre-leveledfoam base are designed to rest on the floor without beddingcompound, provided the floor is level.• Please measure tub on-site before building tub decking.• Jet, pump & blower locations are predetermined andcannot be changed.
• Suction and control locations may vary.• Specifications and configurations are subject to changewithout notice.• Measurements are +1/2" and are subject to changewithout notice.• Measurements herein supersede all others publishedprior to publication date shown below.
OPTIONSColors Available - White BiscuitQuick Ship - reduces lead time - call for availabilityInline Heater with Pump - Whirlpool or Dual BathLift & Turn Drain Kit -Chrome,Brushed Nickel, White
12 air jets, air blower, textured bottom
IMPORTANT INFORMATION
12 air jets, air blower, textured bottom
ELECTRICAL SPECIFICATIONS:Required Electrical Service 110 VoltAir Bath or Whirlpool 1-15 amp GFCIWhirlpool with Inline Heater 1-20 amp GFCIDual Bath 1-20 amp GFCISoaker
GENERAL SPECIFICATIONS:Material AcrylicPlumbed Weight : 165lbs / 75kgSoaker Weight : 135lbs / 61kgAverage Fill: 65 gal to above jet level
©2013 by SPA WORLD CORP Modification Rights Reserved.
2
Installation: Drop-incannot be under mounted
3660VN36" x 591
4 x 23"
3660VN
3660VN
3660VN
• Before ordering or installing, please consider future access toequipment.• Add bedding compound to fully level and support bottom of tub.• Tubs equipped with an air bath or a pre-leveledfoam base are designed to rest on the floor without beddingcompound, provided the floor is level.• Please measure tub on-site before building tub decking.• Jet, pump & blower locations are predetermined and cannot bechanged.
• Suction and control locations may vary.• Specifications and configurations are subject to change withoutnotice.• Measurements are +1/2" and are subject to change withoutnotice.• Measurements herein supersede all others published prior topublication date shown below.
� OPTIONS� Colors Available - White Biscuit� Quick Ship - reduces lead time - call for availability� Inline Heater with Pump - Whirlpool or Whirlpool and Air� Lift & Turn Drain Kit -Chrome,Brushed Nickel, White� Color Match Jets.
Air jets, Air blower, Textured bottom
IMPORTANT INFORMATION
Whirlpool and Air 3660VNAir jets,Air blower, textured bottom
ELECTRICAL SPECIFICATIONS:Required Electrical Service 110 VoltAir Bath or Whirlpool 1-15 amp GFCIWhirlpool with Inline Heater 1-20 amp GFCIWhirlpool and Air 1-20 amp GFCISoaker
GENERAL SPECIFICATIONS:Material AcrylicPlumbed Weight : 160lbs / 73 kgSoaker Weight :130 lbs / 59 kgAverage Fill: 45 gal to above jet level
©2013 by SPA WORLD CORP Modification Rights Reserved.
2
Installation: Drop-incannot be under mounted
3666VN36" x 66" x 23"
• Before ordering or installing, please consider future access toequipment.• Add bedding compound to fully level and support bottom of tub.• Tubs equipped with an air bath or a pre-leveledfoam base are designed to rest on the floor without beddingcompound, provided the floor is level.• Please measure tub on-site before building tub decking.• Jet, pump & blower locations are predetermined and cannot bechanged.
• Suction and control locations may vary.• Specifications and configurations are subject to change withoutnotice.• Measurements are +1/2" and are subject to change withoutnotice.• Measurements herein supersede all others published prior topublication date shown below.
� OPTIONS� Colors Available - White Biscuit� Quick Ship - reduces lead time - call for availability� Inline Heater with Pump - Whirlpool or Whirlpool and Air� Lift & Turn Drain Kit -Chrome,Brushed Nickel, White� Color Match Jets.
Air jets, Air blower, Textured bottom
IMPORTANT INFORMATION
Whirlpool and Air Air jets,Air blower, textured bottom
ELECTRICAL SPECIFICATIONS:Required Electrical Service 110 VoltAir Bath or Whirlpool 1-15 amp GFCIWhirlpool with Inline Heater 1-20 amp GFCIWhirlpool and Air 1-20 amp GFCISoaker
GENERAL SPECIFICATIONS:Material AcrylicPlumbed Weight : 160lbs / 73kgSoaker Weight :130 lbs / 59 kgAverage Fill: 60 gal to above jet level
©2013 by SPA WORLD CORP Modification Rights Reserved.
2
Installation: Drop-incannot be under mounted
3672VN36" x 72" x 23"
3672VN
3672VN
3672VN
• Before ordering or installing, please consider future access toequipment.• Add bedding compound to fully level and support bottom of tub.• Tubs equipped with an air bath or a pre-leveledfoam base are designed to rest on the floor without beddingcompound, provided the floor is level.• Please measure tub on-site before building tub decking.• Jet, pump & blower locations are predetermined and cannot bechanged.
• Suction and control locations may vary.• Specifications and configurations are subject to change withoutnotice.• Measurements are +1/2" and are subject to change withoutnotice.• Measurements herein supersede all others published prior topublication date shown below.
� OPTIONS� Colors Available - White Biscuit� Quick Ship - reduces lead time - call for availability� Inline Heater with Pump - Whirlpool or Whirlpool and Air� Lift & Turn Drain Kit -Chrome,Brushed Nickel, White� Color Match Jets.
Air jets, Air blower, Textured bottom
IMPORTANT INFORMATION
Whirlpool and Air 3672VNAir jets,Air blower, textured bottom
ELECTRICAL SPECIFICATIONS:Required Electrical Service 110 VoltAir Bath or Whirlpool 1-15 amp GFCIWhirlpool with Inline Heater 1-20 amp GFCIWhirlpool and Air 1-20 amp GFCISoaker
GENERAL SPECIFICATIONS:Material AcrylicPlumbed Weight : 165lbs / 75 kgSoaker Weight :135 lbs / 61 kgAverage Fill: 65 gal to above jet level
©2013 by SPA WORLD CORP Modification Rights Reserved.
2
Installation: Drop-incannot be under mounted
4260VN411
2" x 5934" x 23"
4260VN
4260VN
4260VN
• Before ordering or installing, please consider future access toequipment.• Add bedding compound to fully level and support bottom of tub.• Tubs equipped with an air bath or a pre-leveledfoam base are designed to rest on the floor without beddingcompound, provided the floor is level.• Please measure tub on-site before building tub decking.• Jet, pump & blower locations are predetermined and cannot bechanged.
• Suction and control locations may vary.• Specifications and configurations are subject to change withoutnotice.• Measurements are +1/2" and are subject to change withoutnotice.• Measurements herein supersede all others published prior topublication date shown below.
� OPTIONS� Colors Available - White Biscuit� Quick Ship - reduces lead time - call for availability� Inline Heater with Pump - Whirlpool or Whirlpool and Air� Lift & Turn Drain Kit -Chrome,Brushed Nickel, White� Color Match Jets.
Air jets, Air blower, Textured bottom
IMPORTANT INFORMATION
Whirlpool and Air 4260VNAir jets,Air blower, textured bottom
ELECTRICAL SPECIFICATIONS:Required Electrical Service 110 VoltAir Bath or Whirlpool 1-15 amp GFCIWhirlpool with Inline Heater 1-20 amp GFCIWhirlpool and Air 1-20 amp GFCISoaker
GENERAL SPECIFICATIONS:Material AcrylicPlumbed Weight : 170lbs / 77kgSoaker Weight :140lbs / 63kgAverage Fill: 70 gal to above jet level
©2013 by SPA WORLD CORP Modification Rights Reserved.
2
Installation: Drop-incannot be under mounted
4272VN42" x 72" x 23"
4272VN
4272VN
4272VN
• Before ordering or installing, please consider future access toequipment.• Add bedding compound to fully level and support bottom of tub.• Tubs equipped with an air bath or a pre-leveledfoam base are designed to rest on the floor without beddingcompound, provided the floor is level.• Please measure tub on-site before building tub decking.• Jet, pump & blower locations are predetermined and cannot bechanged.
• Suction and control locations may vary.• Specifications and configurations are subject to change withoutnotice.• Measurements are +1/2" and are subject to change withoutnotice.• Measurements herein supersede all others published prior topublication date shown below.
� OPTIONS� Colors Available - White Biscuit� Quick Ship - reduces lead time - call for availability� Inline Heater with Pump - Whirlpool or Whirlpool and Air� Lift & Turn Drain Kit -Chrome,Brushed Nickel, White� Color Match Jets.
Air jets, Air blower, Textured bottom
IMPORTANT INFORMATION
Whirlpool and Air 4272VNAir jets,
Air blower, textured bottom
ELECTRICAL SPECIFICATIONS:Required Electrical Service 110 VoltAir Bath or Whirlpool 1-15 amp GFCIWhirlpool with Inline Heater 1-20 amp GFCIWhirlpool and Air 1-20 amp GFCISoaker
GENERAL SPECIFICATIONS:Material AcrylicPlumbed Weight : 170lbs / 77kgSoaker Weight :140 lbs / 64 kgAverage Fill: 75 gal to above jet level
©2013 by SPA WORLD CORP Modification Rights Reserved.
2
Installation: Drop-incannot be under mounted
4272VNC413
8" x 71 716" x 23"
4272VNC
4272VNC
4272VNC
• Before ordering or installing, please consider future access toequipment.• Add bedding compound to fully level and support bottom of tub.• Tubs equipped with an air bath or a pre-leveledfoam base are designed to rest on the floor without beddingcompound, provided the floor is level.• Please measure tub on-site before building tub decking.• Jet, pump & blower locations are predetermined and cannot bechanged.
• Suction and control locations may vary.• Specifications and configurations are subject to change withoutnotice.• Measurements are +1/2" and are subject to change withoutnotice.• Measurements herein supersede all others published prior topublication date shown below.
� OPTIONS� Colors Available - White Biscuit� Quick Ship - reduces lead time - call for availability� Inline Heater with Pump - Whirlpool or Whirlpool and Air� Lift & Turn Drain Kit -Chrome,Brushed Nickel, White� Color Match Jets.
Air jets, Air blower, Textured bottom
IMPORTANT INFORMATION
Whirlpool and Air 4272VNCAir jets,Air blower, textured bottom
ELECTRICAL SPECIFICATIONS:Required Electrical Service 110 VoltAir Bath or Whirlpool 1-15 amp GFCIWhirlpool with Inline Heater 1-20 amp GFCIWhirlpool and Air 1-20 amp GFCISoaker
GENERAL SPECIFICATIONS:Material AcrylicPlumbed Weight : 170lbs / 77kgSoaker Weight :140 lbs / 63kgAverage Fill: 45 gal to above jet level
©2013 by SPA WORLD CORP Modification Rights Reserved.
2