Giant Magneto Resistance Sensors

Post on 08-Apr-2015

196 views 7 download

transcript

10 Sept 2009 GMR Sensors 1

GMR sensors

Brinta N. R.Roll No:20S7 EEE, SNGCE

10 Sept 2009 GMR Sensors 2

Contents

Introduction Features comparison GMR Sensors- Technology GMR Materials-Types GMR Circuit Techniques GMR Sensors-Applications Conclusion

10 Sept 2009 GMR Sensors 3

Introduction

GMR - “Giant Magnetoresistance" Discovered in the late 1980s Very large resistance changes in

materials with magnetic field The GMR effect states significant

decrease in electrical resistance in the presence of a magnetic field.

Size of magnetic field is 10-100 Oe

10 Sept 2009 GMR Sensors 4

Features

High sensitivity for low magnetic fields

Measures field parallel to its sensitive axis

Good signal-to-noise ratio High spatial resolution Frequency independent sensitivity Low cost, Less power, Small size

10 Sept 2009 GMR Sensors 5

Comparison

10 Sept 2009 GMR Sensors 6

GMR Sensors- Technology

Stands for Giant magnetoresistance (GMR) sensors and can achieve a change of resistance of 10%–20%

In contrast with conventional magnetoresistance (MR), which exhibit a change of resistance of <3%

GMR films have two or more magnetic layers separated by a nonmagnetic layer. 

10 Sept 2009 GMR Sensors 7

GMR Sensors-Technology, Cont.

Significant decrease in electrical resistance in the presence of a magnetic field.   No magnetic field: The direction of

magnetization of adjacent ferromagnetic layers is anti parallel.

High-resistance, magnetic scattering.  

With magnetic field: The magnetization of the adjacent ferromagnetic layers is parallel.

Lower resistance

10 Sept 2009 GMR Sensors 8

GMR Sensors-Technology, Cont.

The new GMR Technology is SDT An insulating layer separates two

magnetic layers A resistance change of 10-40% with

magnetic field

10 Sept 2009 GMR Sensors 9

GMR Materials -Types

Unpinned sandwiches

Antiferromagnetic multilayers

Spin valves

10 Sept 2009 GMR Sensors 10

Unpinned sandwiches

Consist of two magnetic layers separated by a conductor layer

10 Sept 2009 GMR Sensors 11

Anti ferromagnetic multilayers

Consist of multiple repetitions of alternating magnetic and nonmagnetic layers

10 Sept 2009 GMR Sensors 12

Spin valves

An additional layer of an antiferromagnetic material is provided on the top or bottom

10 Sept 2009 GMR Sensors 13

GMR circuit technique  Due to their outstanding sensitivity,

Wheatstone Bridge Circuits are very advantageous for the measurement of resistance, inductance, and capacitance.

 GMR resistors can be configured as a Wheatstone bridge sensor. Two of which are active. Resistor is 2 µm wide, which makes the resistors sensitive only to the field along their long dimension.

10 Sept 2009 GMR Sensors 14

GMR circuit technique, Cont. 

10 Sept 2009 GMR Sensors 15

GMR circuit technique, Cont. 

10 Sept 2009 GMR Sensors 16

GMR circuit technique, Cont. 

Doted linesWith No field

Solid linesWith field of 40mA

10 Sept 2009 GMR Sensors 17

GMR Sensors-Applications

Detection of motor vehicles

Eddy current detection

Detection of magnetic ink

Sensing of body position

10 Sept 2009 GMR Sensors 18

Detection of motor vehicles

The Earth field acts as a biasing magnet resulting in a magnetic signature from various parts of the automobile as it passes a sensor.

The x, y, and z components of the signature can be detected by magnetic sensors buried in the road

10 Sept 2009 GMR Sensors 19

Detection of motor vehicles

10 Sept 2009 GMR Sensors 20

Eddy current detection

A coil applies an ac field to the material under test.

Eddy currents generated by the applied ac field in a continuous conducting sheet below the sensor will create a mirror image of the field from the coil and will also not affect the magnetic sensor.

10 Sept 2009 GMR Sensors 21

Eddy current detection, Cont.

10 Sept 2009 GMR Sensors 22

Detection of magnetic ink

The use of iron oxide as a pigment in black ink is utilized here

This is used for reading MICR The magnetic sensor averages the

signal over the entire height of the characters as they pass the magnetic sensor at a high rate of speed.

10 Sept 2009 GMR Sensors 23

Detection of magnetic ink

10 Sept 2009 GMR Sensors 24

Sensing of body position

Plays a role in various medical evaluation

Small magnet attached to the body part to be monitored

The position of magnet is monitored

10 Sept 2009 GMR Sensors 25

Conclusion

Available for over 25 years Magnetic field produced either by bias

magnet or electric current Magnetic field should be above earth’s

field SDT structures are recent addition to

the GMR materials

10 Sept 2009 GMR Sensors 26

References Robert W. Schneider, Carl H. Smith. “Low

Magnetic Field Sensing with GMR Sensors.” Nonvolatile Electronics, Inc. Sensors, Sep 1, 1999.

Carl H. Smith and Robert W. Schneider. 1997. "Expanding The Horizons Of Magnetic Sensing: GMR," Proc Sensors Expo Boston:139-144.

J. Daughton and Y. Chen. 1993. "GMR Materials for Low Field Applications," IEEE Trans Magn, Vol. 29:2705-2710.

10 Sept 2009 GMR Sensors 27

GMR Sensors