Post on 27-Mar-2021
transcript
Global technology leader in the manufacture
of wire and rope solutions for the world’s most
demanding applications.
Global ExperienceLocal Support
DISCLAIMER
Whilst every effort has been made to ensure the accuracy of information in this publication, no guarantee or warranty (express or implied) is given with
respect to the accuracy or completeness of the information contained within. This publication and the products described herein may be changed or updated
without notice. Any and all liability whatsoever for any loss or damage arising, directly or indirectly, out of or in connection with the use of this publication, is excluded to the fullest extent permitted by law. The user must determine
the suitability of the product for their own particular purpose, either alone or in combination with other products and shall assume all risk and liability in
connection therewith. This document is published by Bridon International Limited in the United Kingdom. Use of this publication shall be governed in accordance
with the laws of England & Wales and the English courts shall have exclusive jurisdiction over any dispute concerning your use of this publication.
INTELLECTUAL PROPERTY
All rights reserved. No parts of this publication may be reproduced or transmitted in any form or by any means without the prior written permission of the copyright
holder, application for which should be addressed to Bridon International Limited. All trademarks used in this publication belong to Bridon or the registered
proprietors of such marks. All rights relating to such trademarks, copyright and any other intellectual property rights are reserved for Bridon or the
person/organisation contributing the relevant materials.
Bridon’s products are manufactured under
controls that conform to quality management
system ISO 9001
Bridon operates environmental management systems
which, where required by legislation or risk, comply with the
requirements of EN ISO 14001:2004 and are assessed and
registered by accredited certification bodies.
Before using any products contained within this brochure
read, understand and follow the guidance given in
ISO 4309:2004 Cranes - Wire Ropes - Care, Maintenance,
Installation, Examination and Discard.
For Offshore Cranes refer to API RP 2D Recommended
Practice for Operation and Maintenance of Offshore Cranes.
Crane and Industrial
Wire rope solutions for the world’s most demanding applications
HEAD OFFICE UK Phone: +44 (0) 1302 565100 Email: cranes@bridon.com
BRIDON AMERICAN Phone: +1 800 521 5555 Email: marketing@bridonamerican.com
BRIDON HANGZHOU Phone: +86 571 8581 8780 Email: sales@bridonhangzhou.com
BRIDON DO BRASIL Phone: +55-21-3265-7424 Email: brazilsalesteam@bridonamerican.com
NATIONALACCREDITATION
OF CERTIFICATIONBODIES
Endurance Dyform 34LR/PI Galvanized
EN
DU
RA
NC
E D
YF
OR
M 3
4LR
/PI (G
ALV
AN
IZE
D)
High Performance Crane Ropes
Telescopic mobile cranesMobile lattice boom cranesTower cranesOffshore pedestal cranesDockside cranes
Mobile harbour cranesFloating cranesShip cranesOverhead hoists/gantry cranesPiling ropes
Benefits:• Low rotation
• Recommended for high lifting operations
• High breaking force
• Reduced rope sheave wear
• Accurate diameter, recommended for multi-layer spooling
• Suitable for single part and multi-part reeving
• Long service life
• Crush resistant
• Reduced down time
• Resistance to bending fatigue
• Reduced elongation
The Bridon Endurance brand - High quality performance wire ropes for the lifting industry.
Our world leading manufacturing capabilities are accompanied by a high level of quality assurance and in-house expertise in research and development and design engineering.
Applications
Crane and Industrial 05/2014 Edition 9
DYFORM 34LR/PI (GALVANIZED)
Endurance Dyform 34LR/PI (Galvanized)
DiameterMinimum Breaking Force
Nominal length mass
EIP/1960 EEIP/2160
10.011.0
12.0
13.014.0
15.0
16.017.018.019.0
20.021.022.0
23.024.025.0
26.027.028.0
29.030.0
32.034.0
35.036.038.0
40.0
42.044.0
46.0
48.050.0
52.0
54.056.0
58.060.0
62.0
64.066.0
68.0
70.072.0
74.076.0
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1.0
1.1
1.3
1.4
1.5
1.6
1.8
1.9
2.0
2.1
2.3
2.4
2.5
2.6
2.8
2.9
3.0
0.4540.5000.6100.6100.7200.8080.8500.9801.021.131.281.281.451.621.811.812.002.212.422.422.652.883.133.233.383.653.924.094.214.505.125.125.786.116.136.487.227.278.008.538.829.689.8910.611.411.512.512.913.514.614.615.716.416.818.018.219.220.220.521.822.323.124.424.525.926.727.428.929.1
0.3050.3360.4100.4100.4840.5430.5710.6590.6870.7590.8600.8600.9741.091.221.221.341.491.631.631.781.942.102.172.272.452.632.752.833.023.443.443.884.104.124.354.854.885.385.735.936.506.657.127.637.738.408.689.079.809.8110.511.011.312.112.212.913.613.814.615.015.516.416.517.417.918.419.419.5
83.692.11111111331491561811882072362362662983333333684064464464875315765946236727227527758299439431060112011201190133013301470156016201780178019402110211022902370248026702670288030003090325032503470369036903930393040304270427045204650477050405040
9.3910.312.412.414.916.717.520.321.123.226.526.529.833.437.437.441.345.650.150.154.759.664.766.770.075.581.184.587.193.1105105119125125133149149165175182200200218237237257266278300300323337347365365390414414441441452479479508522536566566
8.529.3911.311.313.515.115.918.419.121.124.024.027.130.333.933.937.541.445.445.449.654.158.760.563.568.573.676.679.084.596.196.1108114114121135135149159165181181197215215233241252272272293305315331331353376376400400410435435460474486513513
88.197.1117117139156164190198218244248280314350350388428469469513559606626656707760792816873978993
9.9010.913.113.115.617.518.421.322.224.527.427.831.435.239.339.343.648.152.752.757.662.868.170.373.779.485.489.091.798.1109111
8.989.9011.911.914.115.916.719.320.122.224.825.228.532.035.635.639.543.647.847.852.357.061.763.866.872.077.480.783.289.099.7101
5.265.807.027.168.359.359.8011.411.813.114.614.816.818.820.921.023.225.628.128.630.733.436.337.439.242.345.547.448.852.258.559.467.070.771.175.283.884.292.898.8102112115123132134145150157169169182189195209211223234238253258268283284301309318335337
1.211.401.861.922.422.873.083.844.084.735.605.736.888.179.609.6811.213.014.915.417.019.421.922.924.627.630.732.734.137.844.845.955.059.660.065.376.877.489.698.4104119123136151155175184197220220246261273302307334358367403415440477480523545567615619
2.773.204.264.395.536.567.038.789.3310.812.813.115.718.722.022.125.629.634.135.138.944.250.052.456.263.070.374.778.186.4102105126136137149176177205225237273281311346354400420450503504562597624691703763819839920949
10101090110011901250130014001420
52.758.170.371.783.793.798.2114119131146149168188210211232256281287307335363375393424456474489523586595672709712753839843930990
10201120115012301320134014501500157016901690182019001950209021102230234023802530258026902830285030103100318033603370
mm inch kg/m lb/ft kN kNTons(short)
Tons(short)
Tons(metric)
Tons(metric) MN Nm Nm mm2
Axial stiffness @20% load
Metallic cross
section
Torque generated @20% load
Ordinary Lang’s
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. For general notes please refer to page 10 of the General Guidance brochure.
EN
DU
RA
NC
E D
YF
OR
M 3
4LR
MA
X
High Performance Crane RopesBenefits:• Low rotation
• Recommended for high lifting operations
• High breaking force
• Reduced rope sheave wear
• Accurate diameter, recommended for multi-layer spooling
• Suitable for single part and multi-part reeving
• Long service life
• Resistance to bending fatigue
• Reduced elongation
The Bridon Endurance brand - High quality performance wire ropes for the lifting industry.
Our world leading manufacturing capabilities are accompanied by a high level of quality assurance and in-house expertise in research and development and design engineering.
Applications
Endurance Dyform 34LR Max
Telescopic mobile cranesMobile lattice boom cranesTower cranesOffshore pedestal cranesDockside cranesMobile harbour cranesFloating cranesShip cranesOverhead hoists/gantry cranesPiling ropes
Crane and Industrial
ENDURANCE DYFORM 34LR MAX
Endurance Dyform 34LR Max
05/2014 Edition 9
Minimum Breaking ForceDiameter Nominal length
massMAX
mm inch kg/m lb/ft kN Tons(short)
Tons(metric)
12.0
13.014.0
15.0
16.017.018.019.0
20.022.0
24.0
26.028.0
30.0
32.034.0
36.038.0
40.0
42.044.0
46.0
48.050.0
52.0
1/2
9/16
5/8
3/4
7/8
1
1 1/8
1 1/4
1 3/8
1 1/2
1 5/8
1 3/4
1 7/8
2
.740
.842
.8871.041.091.211.371.371.581.781.991.992.212.692.693.203.363.564.114.555.025.575.576.326.797.117.958.078.829.469.7210.610.811.612.412.613.614.014.9
.498
.566
.596
.702
.733
.814
.919
.9191.061.201.341.341.491.811.812.152.262.392.763.063.373.743.744.254.564.785.345.425.936.366.537.127.297.778.308.449.179.4310.0
153171179208216239272272307344385385424524524611684705814848935108510851180124013201480148016301730178019301930212023002300250025602720
17.219.220.123.424.326.930.630.634.538.743.343.347.758.958.968.776.979.291.595.3105122122133139148166166183194200217217238259259281288306
15.617.418.321.222.024.427.727.731.335.139.339.343.253.453.462.369.771.983.086.595.3111111120126135151151166176182197197216235235255261277
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. For general notes please refer to page 10 of the General Guidance brochure.
EN
DU
RA
NC
E D
YF
OR
M 2
8 H
ML M
AX
High Performance Crane RopesBenefits:• Provides up to 20% greater fatigue
performance (Based on internal tests)
• Dimensional stability
• Crush resistant
• Robust and stable core
• Tightly controlled diameter tolerance
The Bridon Endurance brand - High quality performance wire ropes for the lifting industry.
Our world leading manufacturing capabilities are accompanied by a high level of quality assurance and in-house expertise in research and development and design engineering.
Applications
Endurance Dyform 28 HML MAX
NEW
Telescopic mobile cranesMobile lattice boom cranesTower cranesOffshore pedestal cranesDockside cranes
Mobile harbour cranesFloating cranesShip cranesOverhead hoists/gantry cranesPiling ropes
Crane and Industrial
ENDURANCE DYFORM 28 HML MAX
Endurance Dyform 28 HML MAX
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. For general notes please refer to page 10 of the General Guidance brochure.
05/2014 Edition 9
DiameterMinimum Breaking Force
Approximate Mass
mm inch kg/m lb/ft kN Tons
MAX
26.934.538.747.752.658.958.963.174.576.979.291.595.3105122
151718202122
2325
2628
3032
7/8
1
1 1/8
1 1/4
0.3630.4660.5220.6450.7110.7800.7960.8531.011.031.091.251.321.451.64
0.7991.031.151.421.571.721.751.882.222.262.392.762.903.203.74
239307344424468524524561663684705814848935
1,085
EN
DU
RA
NC
E D
YF
OR
M 1
8/P
I
High Performance Crane RopesBenefits:• High breaking force
• Rotation resistant
• Reduced sheave wear
• Long service life
• Reduced downtime
The Bridon Endurance brand - High quality performance wire ropes for the lifting industry.
Our world leading manufacturing capabilities are accompanied by a high level of quality assurance and in-house expertise in research and development and design engineering.
Applications
Endurance Dyform 18/PI
Telescopic mobile cranesMobile lattice boom cranesTower cranesOffshore pedestal cranes
Dockside cranesMobile harbour cranesShip cranesOverhead hoists/gantry cranes
Crane and Industrial
ENDURANCE DYFORM 18/PI
Endurance Dyform 18/PI
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. For general notes please refer to page 10 of the General Guidance brochure.
05/2014 Edition 9
DiameterMinimum Breaking Force
Nominal length mass
mm inch kg/m lb/ft kN Tons(short)
Tons(metric)
Dyform
MN Nm Nm mm2
Axial stiffness
@20% load
Metallic cross
section
Torque generated @20% load
Ordinary Lang’s
10.011.0
12.0
13.014.0
15.0
16.017.018.019.0
20.021.022.0
23.024.025.0
26.027.028.0
29.030.0
32.034.0
36.038.0
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1 1/8
1 1/4
1 3/8
1 1/2
0.4540.5000.6050.6170.7200.8060.8450.9801.021.131.261.281.451.621.811.812.002.212.422.472.652.883.133.233.383.653.924.084.214.505.045.125.786.106.487.227.26
0.3050.3360.4070.4150.4840.5420.5680.6590.6860.7560.8470.8600.9711.091.211.221.341.481.631.661.781.942.102.172.272.452.632.742.833.023.393.443.884.104.354.854.88
76.684.41041041221361431651721902162162442743063063373724164164464865275445706156616887097598638639751030109012101210
8.619.4911.711.713.715.316.118.519.321.424.324.327.430.834.434.437.941.846.846.850.154.659.261.164.169.174.377.379.785.397.097.0110116123136136
7.818.6110.610.612.413.914.616.817.519.422.022.024.927.931.231.234.437.942.442.445.549.653.755.558.162.767.470.272.377.488.088.099.4105111123123
4.825.316.436.567.658.568.9710.410.811.913.413.615.317.219.219.321.223.425.726.228.130.633.234.335.938.741.643.444.747.853.554.461.464.868.876.777.1
4.425.116.807.018.8310.511.214.014.917.220.420.925.129.835.335.340.847.354.456.062.170.679.883.689.7100112119124138163167201217238280282
6.467.489.9710.313.015.416.520.621.925.430.130.837.043.952.152.160.369.980.382.891.8104118124133149166176184204242248297322353415419
50.655.867.568.980.390.094.3109114126141143161181201202223246270276295321349360377407437455469502562571645680723805810
EN
DU
RA
NC
E D
YF
OR
M® 6
/PI
High Performance Crane RopesBenefits:• Exceptional service life
• Robust crush resistant Dyform construction
• Accurate diameter recommended for multi-layer spooling
• Long life, reduced lifetime costs
The Bridon Endurance brand - High quality performance wire ropes for the lifting industry.
Our world leading manufacturing capabilities are accompanied by a high level of quality assurance and in-house expertise in research and development and design engineering.
Applications
Endurance Dyform 6/PI
Telescopic mobile cranesMobile lattice boom cranesTower cranesOffshore pedestal cranesDockside cranesMobile harbour cranes
Floating cranesShip cranesShip to shore container cranesBulk unloader cranesOverhead hoists/gantry cranesSteel works ladle cranesPiling ropesContainer handling cranes
Crane and Industrial
ENDURANCE DYFORM 6/PI
Endurance Dyform 6/PI
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon.
05/2014 Edition 9
DiameterMinimum Breaking Force
Nominal length mass
mm inch kg/m lb/ft kN Tons(short)
Tons(metric)
EIP/1960
kN MN Nm mm2
Axial stiffness @20% load
Metallic cross
section
Torque generated @20% load
Ordinary Lang’sEEIP/2160
Tons(short)
Tons(metric) Nm
8.009.00
10.011.0
12.0
13.014.0
15.0
16.017.018.019.0
20.022.0
24.0
26.028.0
30.0
32.034.0
36.038.0
40.0
42.044.0
46.0
48.050.0
5/16
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1 1/8
1 1/4
1 3/8
1 1/2
1 5/8
1 3/4
1 7/8
0.2890.2940.3720.4160.4590.5550.5670.6610.7400.7760.9000.9371.031.161.181.331.491.661.671.842.222.272.642.963.103.603.754.134.634.705.315.605.956.636.667.347.828.108.899.079.7110.410.611.5
0.1940.1970.2500.2800.3080.3730.3810.4440.4970.5210.6050.6300.6940.7770.7900.8911.001.111.121.231.491.521.781.992.092.422.522.783.113.163.573.764.004.454.484.935.255.445.976.096.537.007.117.71
55.255.269.978.286.21061061241361421651721902122122392682992993314014014775345606496767458488489571010107012001200132014101460160016001750191019102070
6.206.207.868.799.6911.911.913.915.316.018.519.321.423.823.826.930.133.633.637.245.145.153.660.062.973.076.083.795.395.3108114120135135148158164180180197215215233
5.635.637.137.978.7910.810.812.613.914.516.817.519.421.621.624.427.330.530.533.840.940.948.654.557.166.268.976.086.586.597.6103109122122135144149163163178195195211
57.557.572.881.589.9109109129145152176183202230230260291324324359435435518580607704734809920920104011001160130013001440
6.466.468.189.1610.112.312.314.516.317.119.820.622.725.925.929.232.736.436.440.448.948.958.265.268.279.182.590.9103103117124130146146162
5.865.867.428.319.1711.111.113.214.815.517.918.720.623.523.526.529.733.033.036.644.444.452.859.161.971.874.882.593.893.8106112118133133147
3.433.494.414.945.456.596.737.848.799.2110.711.112.313.713.915.717.619.719.821.826.426.931.435.136.842.744.549.054.955.863.066.470.678.779.187.292.896.1105108115124125136
5.665.798.259.7911.315.115.619.623.224.931.133.138.345.446.555.866.377.978.690.912112515718620025026530736437344748553162562972880084397010001110123012601420
9.009.2213.115.618.024.024.731.136.939.549.452.560.872.073.788.4105123124144192198249295316395420486576590707767840988996115012701330153015801750194019902250
33.233.742.747.852.763.765.075.985.089.0103108119133135152171190191211255260303340356413430474531539609643683761765843897929102010401110119012101320
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. For general notes please refer to page 10 of the General Guidance brochure.
EN
DU
RA
NC
E D
YF
OR
M 8
MA
X
High Performance Crane RopesBenefits:• Higher MBF than CTX
• Superior crush resistance
• Better fatigue life
• Excellent service life
• Lower downtime
• Recommended multi-layer spooling
The Bridon Endurance brand - High quality performance wire ropes for the lifting industry.
Our world leading manufacturing capabilities are accompanied by a high level of quality assurance and in-house expertise in research and development and design engineering.
Applications
Endurance Dyform 8 Max
Telescopic mobile cranesMobile lattice boom cranesTower cranesOffshore pedestal cranesDockside cranesMobile harbour cranes
Floating cranesShip cranesShip to shore container cranesOverhead hoists/gantry cranesSteel works ladle cranesContainer handling cranes
NEW
Crane and Industrial
ENDURANCE DYFORM 8 MAX
Endurance Dyform 8 Max
05/2014 Edition 9
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. For general notes please refer to page 10 of the General Guidance brochure.
DiameterMinimum Breaking Force
Nominal length mass
mm inch kg/m lbs/ft kN Tons (short) Tons (metric)
MAX
24.0
26.028.0
30.0
32.0
1
1 1/8
1 1/4
2.883.233.383.924.094.505.045.12
1.942.172.272.642.753.033.393.44
544610639741773851968968
61.168.671.883.386.995.7109109
55.562.265.275.678.886.898.798.7
EN
DU
RA
NC
E D
YF
OR
M 8
/PI
High Performance Crane RopesBenefits:• Excellent service life
• Lower downtime
• Flexible eight strand construction
• High temperature lubricant available
• Robust crush resistant Dyform construction
• Recommended for multi-layer spooling
• Reduced lifetime costs
The Bridon Endurance brand - High quality performance wire ropes for the lifting industry.
Our world leading manufacturing capabilities are accompanied by a high level of quality assurance and in-house expertise in research and development and design engineering.
Applications
Endurance Dyform 8/PI
Mobile lattice boom cranesShip cranesShip to shore container cranes
Overhead hoists/gantry cranesSteel works ladle cranesContainer handling cranes
Crane and Industrial
ENDURANCE DYFORM 8/PI
Endurance Dyform 8/PI
05/2014 Edition 9
DiameterMinimum Breaking Force
Nominal length mass
mm inch kg/m lb/ft kN Tons(short)
Tons(metric)
EIP/1960
kN MN Nm mm2
Axial stiffness @20% load
Metallic cross
section
Torque generated @20% load
Ordinary Lang’sEEIP/2160
Tons(short)
Tons(metric) Nm
10.011.0
12.0
13.014.0
15.0
16.017.018.019.0
20.022.0
24.0
26.028.0
30.0
32.034.0
36.038.0
40.0
42.044.0
46.0
48.050.0
3/8
7/16
1/2
9/16
5/8
3/4
7/8
1
1 1/8
1 1/4
1 3/8
1 1/2
1 5/8
1 3/4
1 7/8
0.4270.4710.5700.5820.6780.7600.7960.9230.9611.061.191.211.361.531.701.711.882.282.332.713.043.183.693.854.244.754.825.445.756.106.806.847.548.028.319.129.319.9710.710.911.8
0.2870.3160.3830.3910.4560.5100.5350.6200.6460.7120.7980.8100.9151.031.141.151.271.531.561.822.042.142.482.582.853.193.243.663.864.104.574.595.065.395.586.136.256.707.187.297.91
86.289.211011012814415017418119822622625528631831835342742750856959669172079490390310201080114012701270141015001560171017101870203020302210
9.6910.0012.412.414.416.216.919.620.322.325.425.428.732.135.735.739.748.048.057.164.067.077.780.989.2102102115121128143143158169175192192210228228248
8.799.1011.211.213.114.715.317.718.520.223.023.026.029.232.432.436.043.543.551.858.060.870.573.481.092.192.1104110116130130144153159174174191207207225
23623626729933333336944644653159562372375383094494410701130120013301330148015701630179017901950213021302310
26.526.530.033.637.437.441.550.150.159.766.970.081.384.693.3106106120127135149149166176183201201219239239260
24.124.127.230.534.034.037.645.545.554.160.763.573.776.884.696.396.3109115122136136151160166183183199217217236
4.835.326.446.577.668.588.9910.410.912.013.413.615.417.219.219.321.325.826.330.734.336.041.743.547.953.654.561.564.969.076.877.385.290.793.9103105113121123133
10.612.316.416.921.325.327.133.836.041.649.450.660.772.084.785.498.8132136171203217271289334396405486527577679684792870917105010901210134013701550
13.815.921.221.927.532.635.043.746.453.763.765.278.292.8109110127169175220261280349371430509521625678742873880102011201180136014001550172017601990
48.553.464.665.976.986.190.3105109120135137154173193194214258264308345361419436481538547617651692771775854910942103010601130121012301340
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. For general notes please refer to page 10 of the General Guidance brochure.
BLU
E S
TR
AN
D 6
X 1
9 C
LAS
S
High Performance Crane RopesBenefits:• High quality six strand crane rope
• Excellent resistance to wear
• Fully lubricated
• Steel Core
High quality performance wire ropes for the lifting industry.
Our world leading manufacturing capabilities are accompanied by a high level of quality assurance and in-house expertise in research and development and design engineering.
Applications
Blue Strand 6 x19 Class
Telescopic mobile cranesOverhead hoists/gantry cranes
Crane and Industrial
BLUE STRAND 6 X 19 CLASS
Blue Strand 6 x 19 Class
05/2014 Edition 9
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. For general notes please refer to page 10 of the General Guidance brochure.
DiameterMinimum Breaking Force
Nominal length mass
mm inch kg/m lb/ft kN Tons(short)
Tons(metric)
IP/1770
kN MN Nm mm2
Axial stiffness @20% load
Metallic cross
section
Torque generated @20% load
Ordinary Lang’sEIP/1960
Tons(short)
Tons(metric) NmkN Tons
(short)Tons
(metric)
EEIP/2160
6.00
7.00
8.009.00
10.011.0
12.0
13.014.0
16.018.019.0
20.022.0
24.0
26.028.0
32.0
36.038.0
40.0
44.0
48.0
52.0
56.0
60.0
1/4
5/16
3/8
7/16
1/2
9/165/8
3/4
7/8
1
1 1/8 1 1/4
1 3/8
1 1/2
1 5/8
1 3/4 1 7/8
2
2 1/8
2 1/4
2 3/8
0.1440.1610.1960.2520.2560.3240.3630.4000.4940.4940.5760.6450.6760.7840.8171.021.021.301.451.451.601.981.982.302.582.703.143.274.104.104.885.185.815.816.406.817.907.909.229.2210.310.811.712.513.114.614.6
0.0970.1080.1320.1690.1720.2180.2440.2690.3320.3320.3870.4340.4540.5270.5490.6880.6880.8710.9750.9751.081.331.331.551.731.822.112.192.752.753.283.483.903.904.304.585.315.316.196.196.947.277.838.438.789.819.78
22.726.230.940.740.351.058.463.079.179.190.71021061241291611612042282282523083083633994264945036456457438179109101010102012201220145014501530170017101980191022702270
2.552.943.474.584.535.736.567.088.898.8910.211.511.913.914.518.118.122.925.625.628.334.634.640.844.947.955.556.572.572.583.591.8102102114115137137163163172191192223215255255
2.342.693.184.204.155.256.016.498.158.149.3410.510.912.813.316.416.420.823.223.225.731.431.437.040.743.450.451.365.865.875.783.392.892.8103104124124148148156173174202195231231
25.130.234.246.944.756.567.269.890.790.7100118118137149183183226262262279354354402460472547578715715854904101010101120117013601360161016101760189019702190220025102510
2.823.403.845.275.026.357.557.8510.2010.211.213.313.315.416.820.620.625.429.429.431.439.839.845.251.753.161.565.080.480.496.0102114114126132153153181181198212221246247282282
2.563.083.494.784.565.766.857.129.259.2510.212.112.014.015.218.718.723.026.726.728.436.136.141.046.948.155.859.072.972.987.192.2103103114119139139164164179193201223224256256
100111130130151165202202249288288308390390443506520603636787787943997111011101230130015001500177017701930208021602410242027702770
11.212.514.614.617.018.522.722.728.032.432.434.643.843.849.856.958.567.871.588.588.5106112125125138146169169199199217234243271272311311
10.211.313.213.315.416.820.620.625.429.429.431.439.839.745.251.653.061.564.980.380.396.2102113113125133153153180180197212220246247282282
1.671.862.272.912.963.754.204.635.715.716.667.467.829.079.4411.811.815.016.816.818.522.822.826.629.831.336.337.847.447.456.459.967.167.174.078.891.491.4107107119125135145151168168
2.052.433.264.764.886.968.259.5613.113.116.619.721.126.428.039.539.556.366.866.877.4106106134159171213227319319416456541541626688861861108010801290138015501730184021602160
2.723.224.316.286.439.1610.912.617.217.221.725.727.634.536.651.451.473.286.886.810013813817320622127529341141153458569469480388211001100139013901640176019702200234027502750
16.218.122.028.328.736.440.744.955.455.464.772.475.988.091.7115115145163163180222222259290304352367460460548582652652718765887887103010301160121013101410147016301630
CO
NS
TR
UC
TE
X
High Performance Crane RopesBenefits:• Rotary hammer swaged effect for
maximum resistance to damage
• Exceptional service life in the most demanding applications
• Robust construction
• High breaking force
• Excellent crush resistance
High quality performance wire ropes for the lifting industry.
Our world leading manufacturing capabilities are accompanied by a high level of quality assurance and in-house expertise in research and development and design engineering.
Applications
Constructex
Mobile lattice boom cranesOffshore pedestal cranesDockside cranesBulk unloader cranes
Piling Tower Cranes
DiameterMinimum Breaking Force
Nominal length mass
mm inch kg/m lb/ft kN Tons(short)
Tons(metric)
CTX
MN Nm mm2
Axial stiffness
@20% load
Metallic cross
section
Torque generated @20% load
Ordinary
16.019.0
22.0
32.0
38.0
44.0
5/8
3/4
7/8 1
1 1/8 1 1/4
1 3/8
1 1/2 1 5/8
1 3/4
1.341.341.641.642.232.232.983.874.764.765.666.856.857.899.239.23
0.9000.9001.1021.1021.4981.4982.0022.6013.1993.1993.8034.6034.6035.3026.2026.202
227227325325432432556707868868106012401240144016501650
25.525.536.536.548.648.662.579.597.697.6119139139162185185
23.123.133.133.144.144.156.772.188.588.5108126126147168168
15152222303039506161748888103120120
5151878713413419828338738751766066083310301030
14314320620627927936546357257268982282296511201120
Crane and Industrial
CONSTRUCTEX
Constructex
05/2014 Edition 9
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. For general notes please refer to page 10 of the General Guidance brochure.
EN
DU
RA
NC
E D
YF
OR
M 3
4 X
L
High Performance Crane RopesBenefits:High quality performance wire ropes for the lifting industry.
Our world leading manufacturing capabilities are accompanied by a high level of quality assurance and in-house expertise in research and development and design engineering.
Applications
Endurance Dyform 34 XL
Mobile lattice boom cranesOffshore pedestal cranesDockside cranesBulk unloader cranesPiling Tower Cranes
• Low rotation
• Recommended for high lifting operations
• High breaking force
• Reduced rope sheave wear
• Accurate diameter, recommended for multi-layer spooling
• Suitable for single part and multi-part reeving
• Long service life
• Crush resistant
• Reduced down time
• Resistance to bending fatigue
• Reduced elongation
DiameterMinimum Breaking Force
Approx massWSC
mm inch kg/ft lb/ft kN Tons
Rope grade
Crane and Industrial
ENDURANCE DYFORM 34XL
Endurance Dyform 34XL
05/2014 Edition 9
This table is for guidance purposes only with no guarantee or warranty (express or implied) as to its accuracy. The products described may be subject to change without notice, and should not be relied on without further advice from Bridon. For general notes please refer to page 10 of the General Guidance brochure.
5/85/81
1 1/8
1 1/4
0.841.212.152.282.632.732.943.37
0.370.530.951.041.191.201.301.49
30.6042.9071.7074.0084.4086.9086.90110.2
272.00382.00638.00658.00751.00773.00829.00980.00
1619
2628
2932
Global technology leader in the manufacture
of wire and rope solutions for the world’s most
demanding applications.
Global ExperienceLocal Support
DISCLAIMER
Whilst every effort has been made to ensure the accuracy of information in this publication, no guarantee or warranty (express or implied) is given with
respect to the accuracy or completeness of the information contained within. This publication and the products described herein may be changed or updated
without notice. Any and all liability whatsoever for any loss or damage arising, directly or indirectly, out of or in connection with the use of this publication,is excluded to the fullest extent permitted by law. The user must determine
the suitability of the product for their own particular purpose, either alone or in combination with other products and shall assume all risk and liability in
connection therewith. This document is published by Bridon International Limited in the United Kingdom. Use of this publication shall be governed in accordance
with the laws of England & Wales and the English courts shall have exclusivejurisdiction over any dispute concerning your use of this publication.
INTELLECTUAL PROPERTY
All rights reserved. No parts of this publication may be reproduced or transmitted in any form or by any means without the prior written permission of the copyright
holder, application for which should be addressed to Bridon InternationalLimited. All trademarks used in this publication belong to Bridon or the registered
proprietors of such marks. All rights relating to such trademarks, copyright and any other intellectual property rights are reserved for Bridon or the
person/organisation contributing the relevant materials.
Bridon’s products are manufactured under
controls that conform to quality management
system ISO 9001
Bridon operates environmental management systems
which, where required by legislation or risk, comply with the
requirements of EN ISO 14001:2004 and are assessed and
registered by accredited certification bodies.
Before using any products contained within this brochure
read, understand and follow the guidance given in
ISO 4309:2004 Cranes - Wire Ropes - Care, Maintenance,
Installation, Examination and Discard.
For Offshore Cranes refer to API RP 2D Recommended
Practice for Operation and Maintenance of Offshore Cranes.
Crane and Industrial
Wire rope solutions for the world’s most demanding applications
HEAD OFFICE UK Phone: +44 (0) 1302 565100 Email: cranes@bridon.com
BRIDON AMERICAN Phone: +1 800 521 5555 Email: marketing@bridonamerican.com
BRIDON HANGZHOU Phone: +86 571 8581 8780 Email: sales@bridonhangzhou.com
BRIDON DO BRASIL Phone: +55-21-3265-7424 Email: brazilsalesteam@bridonamerican.com
NATIONALACCREDITATION
OF CERTIFICATIONBODIES
DISCLAIMER Whilst every effort has been made to ensure the accuracy of information in this publication, no guarantee or warranty (express or implied) is given with respect to the accuracy or completeness of the information contained within. This publication and the products described herein may be changed or updated without notice. Any and all liability whatsoever for any loss or damage arising, directly or indirectly, out of or in connection with the use of this publication, is excluded to the fullest extent permitted by law. The user must determine the suitability of the product for their own particular purpose, either alone or in combination with other products and shall assume all risk and liability in connection therewith. This document is published by Bridon International Limited in the United Kingdom. Use of this publication shall be governed in accordance with the laws of England & Wales and the English courts shall have exclusive jurisdiction over any dispute concerning your use of this publication.
INTELLECTUAL PROPERTYAll rights reserved. No parts of this publication may be reproduced or transmitted in any form or by any means without the prior written permission of the copyright holder, application for which should be addressed to Bridon International Limited. All trademarks used in this publication belong to Bridon or the registered proprietors of such marks. All rights relating to such trademarks, copyright and any other intellectual property rights are reserved for Bridon or the person/organisation contributing the relevant materials.