Post on 02-Mar-2020
transcript
Globe Steels (P) Ltd.
Manufacturers of Bright Steel bars
An ISO 9001:2008 certified company
C-5, Industrial Estate, Ambattur, Chennai – 600058.
Humble beginning as a Trader in steel in 1980.
Bright bar manufacturing started in 1990.
An ISO certified company since 1998.
Installed Annual Capacity – 18,000 Tons
Capacity Enhancement Underway – 30,000 Tons
Entire manufacturing area is under EOT.
Globe Steels (P) Ltd.
Globe Steels (P) Ltd.
Facilities
• Centerless Peeling
• Centerless Grinding
• Cold Drawing
• Wire Drawing
• Magnetic Particle Inspection
• Chemical and Metallurgical Laboratory
• Dedicated sources for Annealing, Hardening and other heat treatment processes.
Globe Steels (P) Ltd.
Manufacturing Area
• Two manufacturing facilities located in Ambattur Industrial Area.
• Total shop floor area is 32,000 sq. feet.
• Total Connected Power is 500 HP.
• Captive Power backup – 100 %.
• Total Manufacturing Workforce – 120.
Globe Steels (P) Ltd.
Product Range
We manufacture bright bars in the following range:
• Wire Rods
• Bars
Rounds - 6 mm to 28 mm Hexagons – 7 mm to 27 mm
Rounds - 16 mm to 85 mm Hexagons – 14 mm to 41 mm Flats - 10 mm to 40 mm Squares - 10 mm to 40 mm
Globe Steels (P) Ltd.
Steel Grades
• Carbon steel
• Free-cutting steel
• Low and medium alloy steel
• Steel grades – DIN, SAE, JIS, BS, AFNOR, GOST among others.
Globe Steels (P) Ltd.
Markets
• Automotive Industry
• Fasteners Industry
• Construction Equipment
• Agricultural Equipment
• Energy
• Machinery
• Mining
• Bearings
• Fasteners
• General Engineering
Globe Steels (P) Ltd.
Customers
• Rane TRW Steering Systems Ltd.
• Rane Madras Group Companies.
• Simpson Group Companies.
• Delphi TVS Diesel Systems Ltd. and vendors.
• Lucas TVS and vendors.
• Sundaram Fasteners Ltd. and vendors.
• Sundaram Clayton and vendors.
• Hyundai Ancillaries.
• Eicher – Royal Enfield.
• Madras Engineering Industries.
Globe Steels (P) Ltd.
Expansion - I
• Process Automation is underway.
• A new manufacturing facility at Maraimalai Nagar near Chennai.
• Expansion in two phases.
• Phase I – 30,000 sq. feet manufacturing area.
• A fully automatic Combined Drawing Line imported from EJP, Germany.
• The line is installed and trial production is underway.
• The line comes with in-line shot blasting to ensure good surface finish.
• Line capacity is from 6 mm to 28 mm, rounds and hexagons.
Globe Steels (P) Ltd.
Expansion - II
• A fully automatic Peeling Machine is under construction at EJP, Germany.
• A fully automatic Draw Bench with Hydraulic Push Pointer is under construction at Sheng Chyean, Taiwan.
• Both the Peeling Machine and Draw Bench will be installed and under production by November 2012.
• An additional shed of 25,000 sq.. Feet will be constructed at Maraimalai Nagar facility to accommodate the two new machines.
• Entire manufacturing area is under EOT as our existing facilities.
Globe Steels (P) Ltd.
Strengths
End-to-end solutions.
Dedicated sources for heat treatment.
Consists of a team of experienced & professional engineers.
Dynamic organization.
Flexible manufacturing set-up.
Globe Steels (P) Ltd.
Focus
Cost reduction.
Process innovation.
Continual improvement.
Continuous training of man-power.
Globe Steels (P) Ltd.
Contact
Main Office and Plant –
Globe Steels (P) Ltd.
C-5, Industrial Estate,
Ambattur, Chennai – 600058
Tamil Nadu, India.
Phone – 91-44-26231025/6, 26257561
Fax – 91-44-26231024
E-Mail – globesteels@globe-india.com
Web – www.globegroup.in
Globe Steels (P) Ltd.
Contact Persons
Mr. R. Sridhar, Director
Mobile – 91-99625 38456
Mr. Gajanand Modi, Director
Mobile – 91-98840 31511
Mr. Govind Modi, Director
Mobile – 91-9884000261
Mr. Rahul Modi, Director
Mobile – 91-99403 46562
Globe Steels (P) Ltd.
Thank You