Post on 14-Oct-2015
description
transcript
GlulamTimberConnectorsThe following information refers to connectors suitable for use in Glulam timber construction.
C-GLULAM-0711Issued July 2011
2Glulam Connectors
Contents
Page 3 About Glulam
Page 4 Anchor Bolts and Resins
Page 5 Heavy Duty Post Bases
Page 6 Aluminium Shear Rings
Page 7-14 Concealed Beam Hangers
Page 15-18 Face Fix Hangers
Page 19 Fastenings
Page 20-21 Bespoke Connectors
Page 22-23 Made to Connector Order Forms
Pices hors standardSimpson Strong-Tie Pices hors standard
113
Catalogu
eD/G
-F20
10SIMPS
ONStrong
-Tie
15www.strongtie.eu
Picesspciales
Outre la gamme la plus large du march, nos ressources techniques et nos capacits de fabrication nouspermettent de rpondre aux demandes de pices hors standard. Sur la base dun plan fourni par vos soins,nous fabriquons votre connexion bois sur mesure.
FABRICATION SPECIALE SUR PLAN
Aciers S235JR, Inox 304L ou Inox 316L
Epaisseur et diamtre des peragessur demande
Pliage manuel ou numrique
Soudure manuelle TIG/MIGou robot pour grande sries
Finitions au choix : galvanisation,lectrozingage, bichromatage, poxy,antirouille
`
3About Glulam
Glulam Connectors
Sustainable, Durable, Beautiful
With the Construction Industry becoming ever more conscious of environmental issues, companies are taking a fresh look at building structures and carbon emissions. As a more sustainable material than steel, Glulam contributes to this goal.
Glulam timbers are being used where steel beams and columns would have been employed in buildings such as schools, supermarkets and large commercial buildings.
Simpson Strong-Tie have designed a range of connectors to help build Glulam structures safely and economically, by standardising the products and obtaining CE approval where possible.
The following pages give technical information on theconnectors, including sizes and load capacities,making life easier for designers and specifiers alike.
For technical queriesplease contact:
Telephone: +44(0)1827 255600Fax: +44(0)1827 255629Email: uktechnical@strongtie.com
For sales enquiries contact our Engineered Timber Division:
Telephone: +44(0)1827 255604Fax: +44(0)1827 255616Email: etdsales@strongtie.com
Superplus/Liebig Anchor/BOAX/AT-HP/LMASShown below are the Heavy Duty Anchor Bolts and Concrete Resin products which are suitable for
use in Glulam Timber applications:
Glulam Connectors
Anchor Bolts & Concrete Resins
1. Loads are based on Non-Cracked concrete (C20/25 - C50/60).
2. For further information please refer to Simpson Strong-Tie Liebig Technical Manual.
3. Re-bar drill bits are available on request.
4. Design calculations for all anchors are available on request.
Super Plus BLS
Zinc CoatedUnder-cut Anchor
Super Plus BLS Stainless SteelUnder-cutAnchor
AS Anchor
StainlessSteel Anchor with hex head screw and domed washer
AB Anchor
StainlessSteel Anchorwith hex nut, domed washer and threaded stud.
BOAX
Throughbolt with hex nut and washer.
LMAS
Threaded Stud with hex nut and washer.
Chemical Anchors
A range of styrene free and pure epoxy resins.
Range Material ApprovalThread
Size
Drill Hole
(mm)
Permissable Load Range
Tension Shear
SuperplusBLS
Grade 8.8 Carbon SteelZinc Plated
ETA-01/0011(Option 1)
M18 14 6.1 -10.8 6.1 - 23.7
M12 20 17.2 - 28.4 34.4 - 40.0
M16 25 44.1 - 53.0 67.4
A4-80 Stainless SteelETA-05/0013
(Option 1)
M8 14 6..1 - 13.1 6.1 - 24.0
M12 20 17.2 - 30.1 34.4 - 48.5
M16 25 44.1 - 56.1 88.2 - 90.7
LiebigAnchor
Grade 8.8 Carbon SteelZinc Plated
ETA-06/0123(Option 1)
M10 15 9.5 - 14.8 22.3
M12 20 17.1 - 26.6 34.3
M16 25 24.0 - 37.2 48.0 - 54.9
A4-80 Stainless Steel (Type AB)A4-70 Stainless Steel (Type AS)
M10 15 7.1 - 11.0 7.1 - 11.0
M12 20 10.7 - 15.8 24.6 - 28.9
M16 25 16.0 - 23.7 40.0 - 49.5
BOAX
Carbon SteelZinc Plated
ETA-08/0276(Option 1)
M10 10 6.3 - 8.1 8.7
M12 12 7.9 - 10.1 11.0
M16 16 16.7 - 21.4 21.0
A4 Stainless SteelETA-08/0276
(Option 1)
M10 10 6.3 - 8.1 8.7
M12 12 7.9 - 10.1 11.0
M16 16 16.7 - 21.4 21.0
AT-HP/LMAS
Grade 5.8 Carbon SteelZinc Plated
ETA-09/013(Option 7)
M12 14 24.8 - 29.3 23.4
M16 18 26.9 - 31.8 36.6
M20 24 39.7 - 46.8 52.6
A4-70 Stainless Steel ETA PendingM12 14 24.8 25.2
M16 18 26.9 39.4
M20 24 39.7 56.8
4
5PBH and PISBMAXIHeavy duty elevated post bases to suit various sizes of timber and Glulam post. Non-standard
sizes to order. Dowels are supplied with the Post Base.
Model Number
Dimensions (mm)
Lower Plate Top Plate Flitch PlateHeight
W2 B2 W1 B1 Fv FhPBH75 100 160 75 75 110 45 200
PBH120 155 155 120 120 110 90 200
PISBMAXIG-B 200 200 120 120 105 90 118
1. Non-standard sizes are available to order.2. Dowels are supplied with the post base.
Type
Fasteners
Base Post
Qty Type (mm) Qty Type (mm)PBH75 2 Bolt 12 2 Dowel 8
PBH120 4 Bolt 12 4 Dowel 8
PISBMAXIG-B 4 Bolt 16 2 Dowel 12
Dimensions
Fastenings
Material:
8mm mild steel plate fin, top plate and bottom
plate.
42mm diameter mild steel tube.
Post bases allow for a rigid fixing of the post to
the ground whilst protecting the end timber from
moisture.
Post bases are fully hot dipped galvanised.
Post to foundation connectors made to
customers design.
Fv
W1B1
W2
B2
H
Fh
Glulam Connectors
Heavy Duty Post Bases
F1F2
F3
F4
Model Number
Characteristic Loads (kN)
Download (F1) Uplift (F2) Lateral (F3) Lateral (F4)
Timber Steel Timber Steel Timber Steel Timber Steel
PBH75 170 109 7.8 8.6 5.3 3.9 5.3 3.8
PBH120 219 109 20.7 22.8 7.7 3.9 7.6 3.8
PISBMAXIG-B 272.2 256.9 42.1 - 27.5 14.1 12.3 -
Performance Data
Bespoke flitch plate and stand off design and manufacturing service available - see pages 22-23.
Cross Laminated Timber Connections
Aluminium Alloy Shear RingType A1 Shear Rings are designed to provide enhanced performance in timber and to improve the
load recovery of the bolt.
Glulam Connectors
Shear Rings
Typeof
Ring
Dimension of Rings (mm) Dimension of Bolts (mm)
Outside Height Thickness RadiusBolt
Washer
dc hc t r or side Thickness
A1
A1-65-B 65 30 5 50 12 36 3.6
A1-80-B 80 30 6 50 12 36 3.6
A1-95-B 95 30 6 60 12 36 3.6
A1-126-B 126 30 6 60 12 36 3.6
A1-128-B 128 45 8 60 12 36 3.6
A1-190-B 190 45 10 60 20 60 6
Typeof
Ring
Definition of Assembly Characteristic Values
Timber Distances (mm) Resistance capacity for one assembly using a type A1 ring
Class(kg/m3)
Thickness(mm)
Minimum According to EN 13271
C24 t1 t2 a1 a2 a3,c a3,t a4,c a4,t de 0
7CBH The CBH hanger is a development of the TU range. It allows for concealed timber to timber
connections and can be face fixed or pocketed on to the header timber.
ModelNo.
MinimumJoist
Height
ConnectorDimensions Fasteners
Characteristic Capacity (kN)
Dowel Embedment Length (mm)
W H BHeader Nails Joist Dowels
60 80 100 120 140 160Qty Type Qty
Standard Installation (Slope = 0 )
CBH150 190 60 150 113.5 14 4.0 X 60 5 10 17.96 18.63 20.65 22.40 24.00 24.00
CBH180 220 60 180 113.5 16 4.0 X 60 6 10 24.98 26.45 29.54 32.07 32.63 32.63
CBH220 250 60 220 113.5 22 4.0 X 60 7 10 32.61 34.24 37.90 41.11 42.83 42.83
Slope = 15
CBH150 190 60 150 113.5 14 4.0 X 60 5 10 17.31 17.86 19.63 21.22 22.90 23.26
CBH180 220 60 180 113.5 16 4.0 X 60 6 10 23.97 25.22 28.03 30.47 31.76 31.76
CBH220 250 60 220 113.5 22 4.0 X 60 7 10 31.36 32.71 35.95 38.91 41.58 41.58
Slope = 30
CBH150 190 60 150 113.5 14 4.0 X 60 5 10 16.73 17.16 18.68 20.08 21.59 22.49
CBH180 220 60 180 113.5 16 4.0 X 60 6 10 23.08 24.12 26.58 28.82 30.81 30.81
CBH220 250 60 220 113.5 22 4.0 X 60 7 10 30.38 31.49 34.30 36.96 39.72 40.37
Slope = 45
CBH150 190 60 510 113.5 14 4.0 X 60 5 10 16.35 16.71 18.03 19.28 20.64 21.91
CBH180 220 60 180 113.5 16 4.0 X 60 6 10 22.50 23.39 25.59 27.64 29.74 30.07
CBH220 250 60 22 113.5 22 4.0 X 60 7 10 29.84 30.80 33.32 35.73 38.28 39.52
1. 4.0 x 60 refers to CNA 4,0 x 60 Annular Ring Shank Nail
W
W
W
H
H
H
B
B
B
W
W
W
H
H
H
B
B
B
W
W
W
H
H
H
B
B
B
CBH150 CBH180 CBH220
Glulam Connectors
Concealed Beam Connectors
Material: 2.5mm Pre-Galvanised Steel
Order nails and dowels separately.
B
H H
H
B
B
8ModelNo.
MinimumJoist
Height
ConnectorDimensions Fasteners
Characteristic Capacity (kN)
Dowel Embedment Length (mm)
W H BHeader Nail Joist Dowels
60 80 100 120 140 160Qty Type Qty
Standard Installation (Slope = 0 and Skew = 0 )
BTALU90-B 142 62 86 103 16 4.0 x 60 4 8 10.30 11.30 12.4 13.20 13.20 13.20
BTALU120-B 172 62 116 103 24 4.0 x 60 3 12 18.10 18.70 19.80 21.20 22.70 24.30
BTALU160-B 212 62 156 103 32 4.0 x 60 4 12 29.80 30.70 23.30 34.40 36.80 39.30
BTALU200-B 252 62 196 103 40 4.0 x 60 5 12 42.70 43.80 46.00 48.90 52.20 55.60
BTALU240-B 292 62 236 103 48 4.0 x 60 6 12 56.00 57.30 60.20 63.90 68.20 72.60
Slope = 15
BTALU90-B 142 62 86 103 16 4.0 x 60 4 8 10.30 11.30 12.40 13.20 13.20 13.20
BTALU120-B 172 62 116 103 24 4.0 x 60 3 12 17.50 18.00 18.90 20.10 21.40 22.90
BTALU160-B 212 62 156 103 32 4.0 x 60 4 12 28.90 29.50 30.90 32.70 34.70 36.90
BTALU200-B 252 62 196 103 40 4.0 x 60 5 12 41.50 42.30 44.10 46.60 49.40 52.40
BTALU240-B 292 62 236 103 48 4.0 x 60 6 12 54.00 55.70 58.10 61.20 64.90 68.80
Slope = 30
BTALU90-B 142 62 86 103 16 4.0 x 60 4 8 10.30 11.30 12.40 13.20 13.20 13.20
BTALU120-B 172 62 116 103 24 4.0 x 60 3 12 17.00 17.30 18.10 19.10 20.30 21.50
BTALU160-B 212 62 156 103 32 4.0 x 60 4 12 28.00 28.70 29.90 31.40 33.20 35.10
BTALU200-B 252 62 196 103 40 4.0 x 60 5 12 40.30 41.50 43.10 45.20 47.60 50.30
BTALU240-B 292 62 236 103 48 4.0 x 60 6 12 53.40 55.20 57.20 60.00 63.20 66.60
Slope = 45
BTALU90-B 142 62 86 103 16 4.0 x 60 4 8 10.30 11.30 12.40 13.20 13.20 13.20
BTALU120-B 172 62 116 103 24 4.0 x 60 3 12 16.50 17.00 17.60 18.50 19.50 20.70
BTALU160-B 212 62 156 103 32 4.0 x 60 4 12 27.50 28.40 29.40 30.80 32.40 34.10
BTALU200-B 252 62 196 103 40 4.0 x 60 5 12 40.30 41.50 42.90 44.80 47.00 49.40
BTALU240-B 292 62 236 103 48 4.0 x 60 6 12 54.10 55.50 57.50 60.00 63.00 66.10
Cross Laminated Timber Connections
BTALU Concealed Beam Hanger
Glulam Connectors
Concealed Beam Connectors
1. 4.0 x 60 refers to CNA 4,0 x 60 Annular Ring Shank Nail
Glulam Connectors
Concealed Beam Connectors
The BTALU concealed hanger is one solution to connecting timber members together
without seeing the connector.
B
H
W
BTALU Installation
BTALU Installed
See opposite for dowel hole positions.
It is designed to be fixed to the header timber and then fully inserted into a slot in the in-coming beam, and held in place with dowels. Holes are drilled through the timber and fin of the BTALU, allowing accurate alignment. This method provides an aesthectically pleasing connection for feature beams.
Material: 6mm Aluminium
Order nails separately.
Glulam Connectors
Concealed Beam ConnectorsGlulam Connectors
Concealed Beam Connectors
BTALU Hole Positions
9
The diagrams to the right show recommended hole positions, to be drilled in situ, using a suitable drill bit or self tapping dowel pin.
6
6
Cross Laminated Timber ConnectionsGlulam ConnectorsConcealed Beam ConnectorsGlulam Connectors
Concealed Beam Connectors
10
ATF Concealed Beam HangerThe ATF hanger is a concealed timber to timber hanger which allows for a strong connection
between the two timbers without the hanger being seen.
ModelNo.
MinimumJoist
Height
ConnectorDimensions Fasteners
CharacteristicCapacity (kN)
W HHeader Nails Joist Screws
DownloadQty Type Qty Type
Standard Installation (Slope = 0 and Skew = 0 )
ATF55/110-B 140 55 110 8 4.0 X 60 11 9555000 5.5
ATF55/150-B 180 55 150 11 4.0 X 60 15 9555000 7.5
ATF55/190-B 220 55 190 14 4.0 X 60 21 9555000 10.5
ATF75/150-B 180 75 150 17 4.0 X 60 22 9555000 11.0
ATF75/190-B 220 75 190 21 4.0 X 60 28 9555000 14.0
1. 4.0 x 60 refers to CNA 4,0 x 60 Annular Ring Shank Nail
2. 9555000 refers to CSA 5,0 x 50 Connector Screw with a reduced head height
The first part of the connector is fixed into a pocket on the header timber with nails and the second part is fitted on the end of the in-coming beam with screws. No slots or dowel holes are necessary, speeding up production.
Material: 5mm Pre-Galvanised Steel
Order nails and screws separately.
W
H
11
ModelNo.
MinimumJoist
Height
ConnectorDimensions Fasteners
CharacteristicCapacity (kN)
W HHeader Nails Joist Screws
DownloadQty Type Qty Type
Standard Installation (Slope = 0 and Skew = 0 )
ETB90-B 115 60 92 6 4.0 x 60 4 5.0 x 80 13.0
ETB120-B 150 60 123 9 4.0 x 60 6 5.0 x 80 18.7
ETB160-B 185 60 168 11 4.0 x 60 8 5.0 x 80 24.2
ETB190-B 220 75 197 19 4.0 x 60 11 5.0 x 80 32.2
ETB230-B 255 75 232 19 4.0 x 60 14 5.0 x 80 40.0
ETB Concealed Beam HangerThe ETB concealed connector comes in two parts. The first is pocketed in the header timber and
fixed with nails, while the second part is fitted to the end of the beam with screws.
1. 4.0 x 60 refers to CNA 4,0 x 60 Annular Ring Shank Nails
2. 5.0 x 80 refers to SCRB/95580 Spax Screw
SIMPS
ON
Strong
-Tie
SIMPS
ON
Strong
-Tie
SIMPS
ON
Strong
-Tie
SIMPS
ON
Strong
-Tie
W
H
10 mm
Material: Joist Plate: 10mm Aluminium. Header Plate: 6mm Aluminium
Order nails and screws separately.
Header Joist
Glulam Connectors
Concealed Beam Connectors
TU Concealed Beam HangerThis 3.5mm thick galvanised steel, load rated hanger provides an aesthetically attractive
connection for exposed beams. Mild steel dowels and screws are included.
Glulam Connectors
Concealed Beam Hangers
TU20 (other sizes similar)U.S. Patent 5,062,733
INSTALLATION:
Dowels aligned across the grain may cause splitting if the wood shrinks excessively. Use only in glulam, composite timber or well dried timber. Verify that the header can take the required fasteners specified in the table.
Attach to the supporting beam with 5.0 x 40mm screws (supplied). Specify dowel length and TU size to fit the application. Preparation of carried beam is best done off-site with cutting and boring tools. Holes in beam should be same diameter as dowel to ensure tight fit. Centre the TU within height of carried beam. Centre dowels within the width of the carried member For a sloped installation the TU hanger remains as standard and the timber is cut and
angled to suit the slope. Recommended for internal dry environments (service class 1 & 2)
OPTIONS: Contact Simpson Strong-Tie for details of special installation tools. The standard install will leave a 5mm gap between carried and supporting beams. Pocket installation gives a fully concealed connection. See next page. Skewed installation up to 60. Sloped installation maximum 45. Options: Skewed TU available. To be factory ordered. Additional screws are available to order.
ModelNo.
MinimumJoist
Height
ConnectorDimensions Fasteners
Characteristic Capacity (kN)
Dowel Embedment Length (mm)
W H BHeader Screw Joist Dowels
60 80 100 120Qty Type Qty
Standard Installation (Slope = 0 and Skew = 0 )
TU12 120 40 96 101 6 5.0 X 40 4 8 7.8 8.4 9.1 9.5
TU16 160 60 134 108 18 5.0 X 40 3 12 19.0 19.4 20.1 21.1
TU20 200 60 174 108 22 5.0 X 40 4 12 27.5 28.0 29.0 30.4
TU24 240 60 214 108 26 5.0 X 40 5 12 36.1 36.7 38.0 39.7
TU28 280 60 254 108 30 5.0 X 40 6 12 44.7 45.4 47.0 48.9
Skewed Installation (Slope = 0 and Skew = 60 )
TU12 120 40 96 101 6 5.0 X 40 4 8 6.7 7.3 8.0 8.4
TU16 160 60 134 108 18 5.0 X 40 3 12 15.6 16.0 16.7 17.5
TU20 200 60 174 108 22 5.0 X 40 4 12 23.5 24.0 25.0 26.3
TU24 240 60 214 108 26 5.0 X 40 5 12 31.9 32.6 34.0 35.8
TU28 280 60 254 108 30 5.0 X 40 6 12 40.7 41.6 43.4 45.6
Sloped Installation (Slope = 45 and Skew = 0 )
TU12 160 40 96 101 6 5.0 X 40 4 8 7.8 8.4 9.1 9.5
TU16 190 60 134 108 18 5.0 X 40 3 12 18.1 18.5 19.0 19.6
TU20 225 60 174 108 22 5.0 X 40 4 12 26.3 26.9 27.6 28.5
TU24 260 60 214 108 26 5.0 X 40 5 12 34.8 25.6 36.4 37.6
TU28 295 60 254 108 30 5.0 X 40 6 12 43.3 44.2 45.3 46.7
Skewed and Sloped Installation (Slope = 45 and Skew = 60 )
TU12 160 40 96 101 6 5.0 X 40 4 8 6.5 6.9 7.3 7.9
TU16 190 60 134 108 18 5.0 X 40 3 12 16.3 16.6 17.0 17.5
TU20 225 60 174 108 22 5.0 X 40 4 12 24.3 24.8 25.4 26.1
TU24 260 60 214 108 26 5.0 X 40 5 12 32.9 33.6 34.4 35.5
TU28 295 60 254 108 30 5.0 X 40 6 12 42.0 42.9 43.9 45.3
Glulam Connectors
Concealed Beam Connectors
1. 5.0 x 40 refers to CSA 5,0 x 40 Connector Screw
Material: 3.5mm Pre-Galvanised Mild Steel. Dowels: Mild Steel Electroplated Zinc coating.
12
Skew Angle
Beam-to-Post Beam-to-Beam Skewed Beam-to-Beam
Sloped Beam-to-Beam
Sloped Beam-to-Beam
INSTALLATION PROCEDURE FOR A TU CONCEALED CONNECTOR:
ATTACH CONNECTOR TO HEADER
Position the connector at the pre determined height and screw the connector to the header or post. Fill all holes with screws supplied.
PREPARE THE BEAM
Cut the beam to the length specified. Cut a slot into the end of the beam. Slot width for TU12 is 6mm and 9mm for all others.
Cut the slot 3mm deeper than the TU and short of the beam height for concealed connector. This allows the connector to be hidden from below. Otherwise cut the slot 3mm deeper than the TU and through the entire beam height.
Fully Concealed Only: Rout a pocket into the beam end. The pocket should be 6mm deep. Enough to hide the thickness of the TU and the screw heads. This eliminates the gap between the beam & header (see Pocket Installation Illustration).
DRILL BEAM DOWEL HOLES
Position drill guide to provide the proper dowel end distance & height. Clamp in place (Drill guide available from Simpson Strong-Tie).
Drill the dowel holes to the required diameter. Dowel hole diameter for the TU12 is 8mm and 12mm for all others.
INSTALL BEAMS
Install top dowel into the carried beam first. Slip beam into place and install the remaining dowels working from the top downwards.
Fully Concealed Only: To hide exposed dowel holes when the installation is complete, glue and plug the holes.
POCKET (CONCEALED)
TU12
STANDARD INSTALLATION
Glulam Connectors
Concealed Beam Connectors (TU)
13
14
TU Supporting Timber Rotated About Axis
Glulam Connectors
Concealed Beam HangersGlulam Connectors
Concealed Beam Connectors
The TU connectors can be used to support timbers rotated about their axis - e.g. purlins.
HangerModel
No.
MinimumJoist
Height(mm)
Characteristic Lateral Capacity (kN)
Dowel Embedment Length (mm)
60 80 100 120
TU12 120 1.5 2.0 2.5 3.0
TU16 160 2.0 2.6 3.3 4.0
TU20 200 2.7 3.5 4.4 5.1
TU24 240 3.4 4.4 5.3 6.4
TU28 280 4.3 5.3 6.4 7.7
1. Values are based on C24 timber grade.
2. Lateral Loads can only be applied to connections with no slope or skew.
3. The following design check must be completed if combined loads are applied at the same time.
1F1,d 2
R1,d
F2,d 2
R2,d
F3,d 2
R3,d( ( () )) + +
Applied Load
1. 3.75 x 30mm square twist nails available on request.
Timber SectionModel
No.
Dimensions (mm) Number of Fasteners(3.75 X 30mm)
Characteristic Capacity (kN)
W H BW H Header Joist Download Uplift
65
180 SAE380/66/2 66 157 84 22 12 8.8 7.7
225 SAE500/66/2 66 218 84 34 18 17.2 14.5
270 SAE500/66/2 66 218 84 34 18 17.2 14.5
315 SAE500/66/2 66 218 84 34 18 17.2 14.5
90
225 SAE500/91/2 91 205 84 34 18 17.2 14.5
270 SAE500/91/2 91 205 84 34 18 17.2 14.5
315 SAE500/91/2 91 205 84 34 18 17.2 14.5
360 SAE590/91/2 91 265 75 40 22 20.8 18.0
405 SAE590/91/2 91 265 75 40 25 20.8 18.0
115
315 SAE620/116/2 116 252 75 40 22 20.8 18.0
360 SAE620/116/2 116 252 75 40 22 20.8 18.0
405 SAE620/116/2 116 252 75 40 22 20.8 18.0
Glulam Connectors
Concealed Beam HangersGlulam Connectors
Face Fix Hangers
SAE Heavy Duty Face Fix HangerThe SAE is a heavy duty hanger designed for face fix applications which require additional strength.
SAE hangers have bolt holes for 12mm fasteners into the face.
SAE Timber Bolted capacity to be determined according to the relevant standards.
The hanger depth is to be at least 60% of the carried member depth to prevent rotation, unless additional lateral restraint is added to the top of the carried member.
INSTALLATION:
Use all specified fasteners. Verify that the header can take the required fasteners specified in the table.
SAE hangers should be installed by filling all round holes with the specified fasteners.
OPTIONS:
Other widths of the SAE hangers are available to order.
Slope and skew options available as a special SAE hanger without bolt holes.
Skews right or left maximum 67.5 and slopes up or down maximum 45.
Hangers with skews greater than 15 will have all joist nailing on the outside angle.
Contact Simpson Strong-Tie technical department for information regarding sloped and skewed options.
40 Material: 2mm Pre-Galvanised Mild Steel.
15
Timber SectionModel
No.
Dimensions (mm) Number of Fasteners(3.75 X 30mm)
Characteristic Capacity (kN)
W H BW H Header Joist Download Uplift
90
225 SAI500/91/2 91 205 84 28 18 16.80 14.3
270 SAI500/91/2 91 205 84 28 18 16.80 14.3
315 SAI500/91/2 91 205 84 28 18 16.80 14.3
360 SAI620/91/2 91 265 75 40 22 20.80 18.0
405 SAI620/91/2 91 265 75 40 22 20.80 18.0
115
315 SAI620/116/2 116 252 75 40 22 20.80 18.0
360 SAI620/116/2 116 252 75 40 22 20.80 18.0
405 SAI620/116/2 116 252 75 40 22 20.80 18.0
Glulam Connectors
Concealed Beam HangersGlulam Connectors
Face Fix Hangers
SAI Heavy Duty Face Fix HangerThe SAI is a heavy duty hanger designed for face fix applications
which require additional strength.
The hanger depth is to be at least 60% of the carried member depth to prevent rotation, unless additional lateral restraint is added to the top of the carried member.
Material: 2mm Pre-Galvanised Mild Steel.
INSTALLATION:
Use all specified fasteners. Verify that the header can take the required fasteners specified in the table.
SAI hangers can be installed by filling all round holes with the specified fasteners.
H
B
W
1. 3.75 x 30mm square twist nails available on request.
16
Timber SectionModel
No.
Dimensions (mm) Number of Fasteners(3.75 X 30mm)
Characteristic Capacity (kN)
W H BW H Header Joist Download Uplift
90
225 SAI500/91/2 91 205 84 28 18 16.80 14.3
270 SAI500/91/2 91 205 84 28 18 16.80 14.3
315 SAI500/91/2 91 205 84 28 18 16.80 14.3
360 SAI620/91/2 91 265 75 40 22 20.80 18.0
405 SAI620/91/2 91 265 75 40 22 20.80 18.0
115
315 SAI620/116/2 116 252 75 40 22 20.80 18.0
360 SAI620/116/2 116 252 75 40 22 20.80 18.0
405 SAI620/116/2 116 252 75 40 22 20.80 18.0
Glulam Connectors
Face Fix Hangers
SDE Width Adjustable Face Fix HangerThe two separate components that make up the SDE system can be adjusted suit a range of joist
widths between 60mm to 120mm. Each SDE is supplied as a pair.
W
B
H
Timber SectionModel
No.
Dimensions (mm) Number of Fasteners(3.75 X 30mm)
Characteristic Capacity (kN)
W H BW H Header Joist Download Uplift
65
180 SDE380/30 30 160 84 22 16 11.5 6.3
225 SDE440/30 30 190 84 28 20 14.3 9.4
270 SDE440/30 30 190 84 28 20 14.3 9.4
315 SDE440/30 30 190 84 28 20 14.3 9.4
90
225 SDE440/30 30 190 84 28 20 14.3 9.4
270 SDE440/30 30 190 84 28 20 14.3 9.4
315 SDE440/30 30 190 84 28 20 14.3 9.4
115 315 SDE440/30 30 190 84 28 20 14.3 9.4
SDE SPECIFICATION
The hanger depth is to be at least 60% of the carried member depth to prevent rotation, unless additional lateral restraint is added at the top of the carried member.
MATERIAL:
2mm pre-galvanised mild steel.
INSTALLATION:
Use all fasteners as specified in the table below. Check that the header can accomodate the fasteners specified. Each SDE piece must also be nailed through the holes underneath.
1. 3.75 x 30mm square twist nails available on request.
17
18
HGUS Heavy Duty Face Fix Hanger
Timber SectionModel
No.
Dimensions (mm)Number of Fasteners
(4.0 x 100mm nails)
Characterisitc Capacity(kN)
W H BW H Header Joist Down Up
90
225 HGUS48N 92 180 100 36 10 20.47 11.06
270 HGUS48N 92 180 100 36 10 20.47 11.06
315 HGUS412N 92 265 100 56 20 33.80 22.11
360 HGUS412N 92 265 100 56 20 33.80 22.11
405 HGUS412N 92 265 100 56 20 33.80 22.11
115
315 HGUS265/115N 115 265 100 56 20 33.80 22.11
360 HGUS265/115N 115 265 100 56 20 33.80 22.11
405 HGUS265/115N 115 265 100 56 20 33.80 22.11
140
360 HGUS5.50/14N 140 316 100 66 22 43.90 24.32
405 HGUS5.50/14N 140 316 100 66 22 43.90 24.32
450 HGUS5.50/14N 140 316 100 66 22 43.90 24.32
495 HGUS5.50/14N 140 316 100 66 22 43.90 24.32
HGUS is a one piece joist hanger for supporting solid composite
beams from timber members.
Glulam Connectors
Concealed Beam HangersGlulam Connectors
Face Fix Hangers
W
100
67
H
Double shear nailing allows distribution of the carried members load through two points on each nail for greater strength.
MATERIAL:
2.5mm pre-galvanised mild steel.
INSTALLATION:
Use all specified fasteners. Verify that the header can take the required fasteners specified in the table.
100mm nails must be driven at 45 into joist dome or pan nails holes, through carrying member and into the carried member to achieve the table loads.
The required nails are supplied with the hanger.
HGUS is a one piece joist hanger for supporting solid composite
beams from timber members.
B
HGUS is a one piece joist hanger for supporting solid composite
beams from timber members.
Glulam Connectors
Fastenings
BoltsGrade 8.8 in accordance with EN ISO 4014 or EN ISO 4017
Item Code Diameter (mm) OverallLength (mm)
M12/80
12
80
M12/100 100
M12/120 120
M12/140 140
M12/160 160
M12/180 180
M12/200 200
M12/220 220
M12/240 240
M12/250 250
M16/120
16
120
M16/140 140
M16/160 160
M16/180 180
M16/200 200
M16/220 220
M16/240 240
M16/250 250
M20/120
20
120
M20/140 140
M20/160 160
M20/180 180
M20/200 200
M20/220 220
M20/240 240
M20/250 250
DowelsIn accordance with EN14592:2009
Item Code Diameter (mm) OverallLength (mm)
STD8X60-B
8
60
STD8X80-B 60
STD8X100-B 100
STD8X120-B 120
STD10X60-B
10
60
STD10X80-B 80
STD10X100-B 100
STD10X120-B 120
STD10X140-B 140
STD12X60-B
12
60
STD12X80-B 80
STD12X100-B 100
STD12X120-B 120
STD12X140-B 140
STD12X160-B 160
STD12X180-B 180
STD12X200-B 200
STD16X120-B
16
120
STD16X140-B 140
STD16X160-B 160
STD16X180-B 180
STD16X200-B 200
STD20X120-B
20
120
STD20X140-B 140
STD20X160-B 160
STD20X180-B 180
STD20X200-B 200
Hex NutsGrade 8 in accordance with EN ISO 4032 or EN ISO 780
Item Code Description Material
M12 NUT Hex Nut: M12MildSteel
M16 NUT Hex Nut: M16
M20 NUT Hex Nut: M20
WashersIn accordance with EN1995-1-1
Item Code OutsideDiameter (mm)Inside
Diameter (mm)Thickness
(mm)
WASHER36/13/3.6 36 13 3.6
WASHER48/17/4.8 48 17 4.8
WASHER60/21/6 60 21 6
19
20
Glulam Connectors
Fabrication Service
Bespoke ConnectorsDue to the nature of Glulam construction, there are occasions when standard products will not be sufficient. To this end, Simpson Strong-Tie operates a speedy fabrication service to manufacture connectors for customers which have either been designed by Architects, Designers and Structural Engineers, or are based on a full design and manufacturing service provided by Simpson Strong-Tie, on provision of dimensional and loading information.
These items can be as diverse as large heavy duty post bases, moment plates or small, but heavy dutyangle brackets.
Email or Fax:
Fax: +44(0)1827 255629
Email: uktechnical@strongtie.com
Simpson Strong-Tie, Winchester Road, Cardinal Point, Tamworth, Staffordshire, B78 3HG
Visit: www.strongtie.co.uk/fabrication
Pices hors standardSimpson Strong-Tie Pices hors standard
113
Catalogu
eD/G
-F20
10SIMPS
ONStrong
-Tie
15www.strongtie.eu
Picesspciales
Outre la gamme la plus large du march, nos ressources techniques et nos capacits de fabrication nouspermettent de rpondre aux demandes de pices hors standard. Sur la base dun plan fourni par vos soins,nous fabriquons votre connexion bois sur mesure.
FABRICATION SPECIALE SUR PLAN
Aciers S235JR, Inox 304L ou Inox 316L
Epaisseur et diamtre des peragessur demande
Pliage manuel ou numrique
Soudure manuelle TIG/MIGou robot pour grande sries
Finitions au choix : galvanisation,lectrozingage, bichromatage, poxy,antirouille
Pices hors standardSimpson Strong-Tie Pices hors standard
113
Catalogu
eD/G
-F20
10SIMPS
ONStrong
-Tie
15www.strongtie.eu
Picesspciales
Outre la gamme la plus large du march, nos ressources techniques et nos capacits de fabrication nouspermettent de rpondre aux demandes de pices hors standard. Sur la base dun plan fourni par vos soins,nous fabriquons votre connexion bois sur mesure.
FABRICATION SPECIALE SUR PLAN
Aciers S235JR, Inox 304L ou Inox 316L
Epaisseur et diamtre des peragessur demande
Pliage manuel ou numrique
Soudure manuelle TIG/MIGou robot pour grande sries
Finitions au choix : galvanisation,lectrozingage, bichromatage, poxy,antirouille
Pices hors standardSimpson Strong-Tie Pices hors standard
113
Catalogu
eD/G
-F20
10SIMPS
ONStrong
-Tie
15www.strongtie.eu
Picesspciales
Outre la gamme la plus large du march, nos ressources techniques et nos capacits de fabrication nouspermettent de rpondre aux demandes de pices hors standard. Sur la base dun plan fourni par vos soins,nous fabriquons votre connexion bois sur mesure.
FABRICATION SPECIALE SUR PLAN
Aciers S235JR, Inox 304L ou Inox 316L
Epaisseur et diamtre des peragessur demande
Pliage manuel ou numrique
Soudure manuelle TIG/MIGou robot pour grande sries
Finitions au choix : galvanisation,lectrozingage, bichromatage, poxy,antirouille
Pices hors standardSimpson Strong-Tie Pices hors standard
113
Catalogu
eD/G
-F20
10SIMPS
ONStrong
-Tie
15www.strongtie.eu
Picesspciales
Outre la gamme la plus large du march, nos ressources techniques et nos capacits de fabrication nouspermettent de rpondre aux demandes de pices hors standard. Sur la base dun plan fourni par vos soins,nous fabriquons votre connexion bois sur mesure.
FABRICATION SPECIALE SUR PLAN
Aciers S235JR, Inox 304L ou Inox 316L
Epaisseur et diamtre des peragessur demande
Pliage manuel ou numrique
Soudure manuelle TIG/MIGou robot pour grande sries
Finitions au choix : galvanisation,lectrozingage, bichromatage, poxy,antirouille
To ensure we quote effectively for our fabrication only service, please provide as much information as possible, including:
Drawing (CAD file if available)
Material size and specification
Tolerances (general tolerance of +/- 1mm will be applied unless otherwise stated)
Coating requirement (type and thickness)
Quantity
Date Required
Connectors manufactured via this service will be accompanied by the standard "Disclaimer".
To ensure we quote effectively for our post base design and fabrication service, we will require some basic dimensional and loading
information - see individual products in the following sections for further details. Minimum required information is indicated with *.
Due to a wide range of design possibilities, a reliable lead time can only be provided when designs are approved.
21
Fabricated Knee and Apex Moment Plates
Glulam structures often require moment plates to connect the timbers together, whether it be at the apex of a roof or at a post/beam intersection ( see drawing above).
Simpson Strong-Tie offers a fabrication service to manufacture the plates to the customers requirements, and supply the fixings to secure it in place.
Please contact our Technical Department, with the details of the structure to be connected.
Telephone: +44(0)1827 255600Fax: +44(0)1827 255629Email: uktechnical@strongtie.comVisit: www.strongtie.co.uk/glulam
Knee Joint
Apex Joint
See Page 5 & 22/23
Glulam Connectors
Moment Plates
22
Special PBG Post Base (Flitch Plate) Order
Name:Qty Required:
Company Name:
Telephone Number:Date Required:
Email Address:
Complete and Fax to: 01827 255629
Office Use Only Reference No: Manufacturing Cost: Selling Price:
Width of Timber Post * mm
Depth of Timber Post * mm
Grade of Timber Post *
Load Duration **
Downward Applied Load * F1 kN
Upward Applied Load * F2 kN
Lateral Applied Load * F3 kN
Lateral Applied Load * F4 kN
Width 1 of Post W1 mm
Width 2 of Post W2 mm
Diameter of Fixing Bolt D mm
Thickness of Flitch Plate Ft mmWidth of Flitch Plate Fh mm
Height of Flitch Plate Fv mm
Thickness of Base Plate Bt mmHeight to Dowel Holes Hh mm
Distance to First Dowel Hole Hw mm
Spacing Between Dowel Holes Hs mm
Diameter of Dowel Holes d mm
Number of Dowel Holes N
Grade S250 in accordance with EN10346Indicate material
required. Supplied in S250 by default.
Grade S275 in accordance with EN10346
Grade S355 in accordance with EN10346
Post bases will zinc coated with a thickness of 55 m unless otherwise specified.
** Load duration type assumed Long Term for F1 and Short Term for F2, F3 and F4 unless otherwise stated. Please add "S" for safe working loads or "C" for charateristic loads after the duration figure.
F4
23
Name:Qty Required:
Company Name:
Telephone Number:Date Required:
Email Address:
Special PBH Post Base (Stand Off) Order
Complete and Fax to: 01827 255629
Width of Timber Post * mm
Depth of Timber Post * mm
Grade of Timber Post *
Load Duration**
Downward Applied Load * F1 kN
Upward Applied Load * F2 kN
Lateral Applied Load * F3 kN
Lateral Applied Load * F4 kN
Height of Upstand Post * H mm
Width of Base Plate W2 mm
Breadth of Base Plate B2 mm
Thickness of Base Plate t1 mm
Width of Top Plate W1 mm
Breadth of Top Plate B1 mm
Thickness of Top Plate t2 mm
Diameter of Fixing Bolt Holes D1 mm
Office Use Only Reference No: Manufacturing Cost: Selling Price:
Diameter of Dowel Holes D2 mm
Width of Flitch Plate Fh mm
Height of Flitch Plate Fv mm
Thickness of Flitch Plate t3 mm
Section of Upstand Post Pd mm
Height to Dowel Holes dv1 mm
Spacing Between Dowel Holes dv2 mm
Dist. Top of Flitch Plate to Dowel Holes dv3 mm
Dist. to First Column of Dowel Holes dh1 mm
Spacing Between Columns of Dowel Holes dh2 mm
Please Select The Steel Specification from the list Below:
Grade S250 in accordance with EN10346Indicate material
required. Supplied in S250 by default.
Grade S275 in accordance with EN10346
Grade S355 in accordance with EN10346
Post bases will zinc coated with a thickness of 55 m unless otherwise specified.
B1
B2
W1 W2
** Load duration type assumed Long Term for F1 and Short Term for F2, F3 and F4 unless otherwise stated. Please add "S" for safe working loads or "C" for charateristic loads after the duration figure.
GlulamTimberConnectorsFor further information and technical
support regarding the Glulam
connector range contact:
Simpson Strong-Tie Winchester RoadCardinal PointTamworthStaffordshireB78 3HG
Telephone +44(0)1827 255600Email: uktechnical@strongtie.comVisit: www.strongtie.co.uk/glulam
Effective July 2011
C-GLULAM-0711