Post on 03-Apr-2016
description
transcript
Granberg® work gloves were first introduced in 1961, more than 50 years ago. Today the company has grown into a leading manufacturer of gloves meeting numerous needs of an ever increasing and highly demanding industry worldwide. Granberg’s headquarters are located in Norway. The company serves important segments such as construction and building industries, oil- and gas, assembly and engineering, petro-chemical, food processing etc.
The product portfolio comprises more than 250 styles of gloves for a wide range of industries. The success of the company’s product development and product portfolio can be traced back to its experienced R&D team and close customer relationships. Furthermore the chief engineer holds a master’s degree in polymers and textiles with credentials also including a PhD in Materials Engineering. Hand injuries are some of the most costly and common injuries within several industries. Granberg offers intelligent glove solutions to reduce hand injuries drastically and thereby cut-ting down unnecessary expenses. We do not only help reduce costs for the employer, but also the mishap and dangers to the affected worker. A small cut injury can cause long-term tendon or nerve damage that a person has to live with for the rest of his life. One of the major occupational safety concerns are hazards associated with impacts and falling objects. The gloves’ state-of-the-art patented impact design and high quality materials reduces strain over prolonged periods of use, yet provides excellent protection from impacts. Granberg offers several gloves with impact protection.
Good grip materials are provided to Granberg’s gloves providing an enhanced grip ensuring maximum safety as you work with slippery tools, climbing ladders and so forth. Also a perfect fit is essential.
Granberg® gloves can be shipped to any destination at very short notice from the company’s logistics facilities in Norway and Sweden.
Enjoy this small leaflet, and always request and trust Granberg® gloves for your safety and for your comfort!
Sincerely Yours
Ole M. GranbergCEO
Granberg® – World Class Protective Work Gloves
3
Page4-8
Page9-11
Page15
Page12-14
3
Pictograms for the Various Relevant Standards
EN 420 See instructions for use (product package).
EN 388 Protection against mechanical risks.
EN 374 Protection against chemical risks (limited protection).
EN 374 Protection against chemical risks (chemical protection).
EN 374 Protection against bacteriological risks.
EN 407 Protection against thermal risks.
EN 455 Medical gloves for single use.
Food Safe The international symbol for food safe material.Sta
ndard
s CE-markingDeclaration that the product meets the requirements of the applicable EC directives
European Glove Standards General Requirements
All protective gloves must comply with EN 420 – General requirements for protective gloves. The only exceptions are insulating protective gloves for working with electricity and single-use gloves. EN 420 regulates the minimum requirements for a glove.
CategoriesIn order to comply with a number of requirements in the commercial sector, protective gloves are separated into three categories: Category I: For minimal risks. Category II: For intermediate risks, e.g. mechanical risks. Category III: For irreversible or mortal risks, e.g. injuries from chemicals.
4
Extra durable MacroSkin Pro® material, with back of hand in elastic nylon. Unlined.
›› A rugged work glove that can hardly wear out.›› Tough reinforced palm and fingertips.›› Soft and supple wrist end made of the elastic neoprene.›› Very good breathability.›› Adjustable velcro closure at the wrist.›› Can be machine washed at 60°C. Drip dry.
Suitable for:Rough work, e.g. for offshore usage | Iron fixing | Sawmill work.
EU design protection for green high visibility details: DM/077 441.
EX® Assembly GlovesArt. 120.1118
The type of hand injuries that occur in the oil and gas industry have inspired us to develop a great variety of gloves. Crushing, pinching, cut and puncture hazards are very common. Workers involved in the areas of drilling, transportation, construction and refining face the same problems. Granberg has the solutions. Give us your problem and we will help you deal with it.
Abrasion resistance
Blade cut resistance
Tear resistance
Puncture resistance
EN 420, 388
II
8 | 9 | 10
Unlined
120 pairs (12 per bundle)
23-25 cm
MacroSkin Pro®
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. II
2322
Typhoon® fiber with sandy nitrile coating, oil resistant.
›› Very comfortable and flexible heavy-duty gloves.›› One of the strongest fibers in the world Typhoon® provides excellent cut 5 protection.›› Powerful impact protective details on back of hand.›› Designed for optimum ergonomics.›› Abrasion-resistant sandy nitrile palm coating with MacroSkin Pro® details and silicon print provides exceptional grip.›› Adjustable Velcro closure around the glove’s wrist.
›› Excellent breathability.›› Fitted with great touch sensitivity. ›› Machine washable.
Suitable for: Extreme working conditions for oil and gas drilling, extraction and refining | Mining | Demolition | Rigging | Heavy construction | Tool pushing etc.
EX® Gloves with Impact ProtectionArt. 116.1190
EN 420, 388
II
8 | 9 | 10 | 11
Unlined
144 pairs (12 per bundle)
24-28 cm
Typhoon®/Nitrile
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. II
PENDING
Oil
& G
as P
rofe
ssio
nals
Oil & Gas Professionals
NEW
PRODUCT
With sandy Nitrile coating. Yellow Hi-Viz™ colour.
›› Bright fluorescent yellow colour makes these gloves easily visible even in dim light.›› Very comfortable glove with good wet grip and excellent dry grip.›› Provides maximum protection against cuts, level 5/EN 388.›› Rejects oil and grease.›› Soft and flexible gloves with long life.
Suitable for: Use in areas with high risk of cuts and high standards of visibility.
Cut Resistant Gloves with Typhoon®
Art. 116.575
EN 420, 388
II
8 | 9 | 10 | 11
…
144 pairs (12 per bundle)
24-28 cm
Typhoon® /Nitrile
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. II
4543Abrasion resistance
Blade cut resistance
Tear resistance
Puncture resistance
Fully coated with special vinyl foam coating. Liquid-proof.
›› Fully coated on palm including all back of hand with superior waterproof vinyl foam coating.›› Outstanding dexterity and fit.›› Actifresh®-treated to eliminate bacterias and promote freshness.›› The vinyl coating is a patented process which is used in the manufacture of the coating. This process creates encapsulated air molecules which repel liquids for a firm wet and dry grip. The coating also provides a cushioning effect which minimizes impact.
Suitable for: Construction | Heavy duty work | Assembly of components | Shipping | Oil and gas industry.
Abrasion resistance
Blade cut resistance
Tear resistance
Puncture resistance
EN 420, 388
II
8 | 9 | 10 | 11 | 12
Nylon (seamless)
144 pairs (12 per bundle)
23-29 cm
VFC/Nylon
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. II
4131
Assembly glovesArt. 109.0400LP
With patented nitrile foam coating. FR.
›› Mixed Kevlar® and wool fibers cut resistant and flame retardant glove.›› Provides exceptional protection for workers with EN 407 level 4 resistance to flammability and EN 388 cut protection level 5.›› The patented micro-capillary Nitrile foam technology that is incorporated in the gloves draws oil and water aside and thus frees up the palm surface of the glove for a solid grip.›› A combination of superior oil grip, wet grip, dry grip, and excellent abrasion resistance combined with dexterity and breathability.
Suitable for: Oil and gas industry | Petrochemical | Utilities | Mining industry | Construction | Metal industry | Glass handling
EN 388 and EN 407 are in-house test results. The gloves are under testing at independent laboratory.
cat. II
4542 412210
Cut and flame retardant glovesArt. 116.559
NEW
PRODUCT
Oil &
Gas P
rofessionals
Oil & Gas Professionals 5
EN 420, 388, 407
II
8 | 9 | 10 | 11
…
144 pairs (12 per bundle)
24-28 CM
Kevlar®, Wool/NFC
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
6
Durable MacroSkin Pro® material in palm and fingers.
›› Produced for extreme working conditions for oil and gas professionals.›› Powerful cut resistant insert in palm and cuff.›› Highest possible cut protection.›› Extra protection with enhanced impact elements on back.›› High visibility colours for increased safety.›› Designed for optimal ergonomics.›› Silicone print technology used in palm for improved grip.›› Fluorescent wrist band for extra safety when working in the dark.›› Ajustable Velcro closure around the glove’s wrist.›› Soft neoprene cuff with Velcro closure.›› Excellent breathability.›› Machine-washable.
Suitable for: Extreme working conditions within oil and gas industry | Mining industry and related indus-tries with very high demands for hand protection.Info:Design protected, and protected by patents and patents pending in several countries including USA and Canada.
Cut 5 Impact Hi-Viz™ Protective GlovesArt. 115.1199
EN 420, 388
II
8 | 9 | 10 | 11
…
36 pairs (6 per bundle)
25-27 CM
MacroSkin Pro®/Spandex
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. II PENDING
HARD AS A ROCKSMOOTH AS COTTON.
NEW
PRODUCT
Oil
& G
as P
rofe
ssio
nals
Oil & Gas Professionals
NEW PRODUCT
Durable KR-Grip™ material in palm and fingers.
›› Produced for extreme working conditions for oil and gas professionals.›› Powerful cut resistant insert in palm and cuff.›› Powerful impact protection on back of hand.›› High visibility colours for increased safety.›› Designed for optimal ergonomics.›› Neoprene cuff provides comfort and wrist protection.›› Highest possible cut protection.›› Excellent breathability.›› Machine-washable.
Suitable for: Extreme working conditions within oil and gas industry | Mining industry and related industries with very high demands for hand protection.
Info: Design protected, and protected by patents and patents pending in several countries including USA and Canada.
Cut 5 Impact Hi-Viz™ Protective GlovesArt. 115.9001
EN 420, 388
II
8 | 9 | 10 | 11 | 12
…
36 pairs (6 per bundle)
25-27 CM
KR-Grip™/Spandex
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. II PENDING
THE BEST THERE IS.
Oil &
Gas P
rofessionals
Oil & Gas Professionals 7
8
Interlock liner.
›› Protects against chemicals including diesel fuel, petrol and oil.›› 3-4 times longer life span compared to equivalent PVC gloves.›› Applied for maximum comfort.
Suitable for:Oil and petrochemical industry | Fishing/fish farming | Handling shellfish | Deck work etc.
Nitrile-Dipped GlovesArt. 114.0630
EN 420, 388, 374, 1186
III
7 | 8 | 9 | 10 | 11 | 12
Cotton/Interlock
120 pairs (10 per bundle)
30 cm
Nitrile
0,80 mm
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:cat. III 3121
Powder-Free. 30 cm long, 0.40 mm (double wall) thickness. Blue colour.
›› Double thickness compared with conventional disposable nitrile gloves.›› Textured surface for maximum grip.›› Protect against primary alcohols, saturated hydrocarbons and inorganic bases.›› Tested and approved for such chemicals as Methanol, n-Heptane and Sodium Hydroxide.
Suitable for: Laboratories | Mechanical workshops | Janitorial firms etc.
50 gloves per dispenser, 500 pcs per carton.
EN 420, 374, 455
III
S - 2XL
…
10 boxes (50 per box)
30 cm
Nitrile
0,40 mm (double wall)
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:cat. III AJK
1662
Chemstar® Nitrile Chemical Resistant GlovesArt. 114.950
Oil
& G
as P
rofe
ssio
nals
Oil & Gas Professionals
Chemical MinutesTolerance
Level
99% Methanol ≥ 10 1
Hydrofluoric acid ≥ 10 1
Diethylamine ≥ 10 1
99% n-Heptane ≥ 480 6
40% Sodium Hydroxide ≥ 480 6
Permeation result
Factors such as temperature and stretching have a great influence on how fast the chemical permeates the glove material. We therefor recommend a 25% safety margin.
Gauntlet version on soft seamless nylon liner.
›› 100% liquidproof. Soft, seamless nylon liner. Extremely soft and comfortable to wear.›› Outstanding grip in dry, wet & oily conditions. Safer handling means improved productivity.›› Exceptional flexibility. Easier to manipulate, less tiring to the and easier to get on and off.›› Special double-dipped PVC coating. ›› Approved for handling food stuffs and REACH-compliant.
Suitable for: Fishing industry | Refining – Oil & Petrol | Handling acids, caustics and solvents | Petrochemi-cals | Public utilities.
PVC dipped chemical resistant glovesArt. 109.8135
EN 420, 388, 374, 1186
III
8 | 9 | 10 | 11
Nylon (seamless)
60 pairs (6 per bundle)
35 cm
PVC
...
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. III 4131 AKL263
2
9
Oeko-Tex® 100 approved. With patented nitrile foam coating. Extra soft.
›› A revolutionary combination of superior oil grip, wet grip, dry grip, and excellent abrasion resistance combined with dexterity and breathability.›› The patented micro-capillary nitrile foam technology that is incorporated in the glove draws oil and water aside and thus frees up the palm surface of the glove for a solid grip.›› ANTIWET treated which ensures that liquids even on the nylon handback repels.›› Actifresh®-treated; a treatment that kills bacterias and provides a magnificent freshness.›› An extra thin 18-gauge nylon liner ensures extra softness and flexibility.
Suitable for: Assembly and finishing | Metal fabrication | Assembly of white goods | General site & factory maintenance | Warehouse work and general handling.
Pro-Fit® Superflex Assembly glovesArt. 114.0766
EN 420, 388
II
7 | 8 | 9 | 10 | 11
…
144 pairs (12 per bundle)
21-28 cm
NFC/3G Athlet™
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:cat. II 4121
Abrasion resistance
Blade cut resistance
Tear resistance
Puncture resistance
Engineering &
assembly
Engineering & assembly
10 Engineering & Assembly
Synthetic leather with elastic cotton back and Velcro closure, unlined.
›› Extra soft for work which requires high degree of touch sensitivity.›› Made from specially treated synthetic leather.›› Good ventilation on the back.
Assembly Gloves Art. 107.4295
EN 420, 388
II
6 | 7 | 8 | 9 | 10 | 11
Unlined
120 pairs (12 per bundle)
20-25 cm
Synthetic leather
0,7 mm
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. II
1121
Goatskin, full leather, unlined.
›› Soft and strong leather ensuring long life-span. ›› For assembly work, grinding work with metals, etc.
Assembly Gloves Art. 113.1020
EN 420
I
7 | 9 | 10 | 11
Unlined
120 pairs (12 per bundle)
22-26 cm
Goatskin
1,0-1,1 mm
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. I
NEW PRODUCT
Nitrile, powder free. Orange colour. 27 cm length.
›› Tested and approved for various chemicals (listed on box).›› Soft and strong nitrile of highest quality.›› Micro textured fingertips for optimum grip.›› Resistant to grease, fats, detergents, etc.›› Suitable for direct contact with all types of foodstuffs.›› Approved for medical use (EN 455).
Suitable for: Laboratories | Chemical industry | Automotive industry | Mechanical workshops | Assembly | Food industry.
* Double wall thickness(finger): 0,28 mm.
Chemstar® Single-use GlovesArt. 114.940
EN 420, 374, 455, 1186
III
S | M | L | XL
…
10 boxes (100 per box)
27 cm
Nitrile
0,28 mm*
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness: cat. III JK26
Chemical MinutesTolerance
Level
40% Sodium Hydroxide ≥ 480 6
96% Sulphuric Acid 12 1
5% Ethidium Bromide ≥ 480 6
50% Glutaraldehyde ≥ 480 6
1.5% Methanol in water ≥ 480 6
n-Heptane ≥ 30 2
Methanol 2 0
0.1% Phenol ≥ 480 6
Permeation result
Factors such as temperature and stretching have a great influence on how fast the chemical permeates the glove material. We therefor recommend a 25% safety margin.
Eng
inee
ring
& a
ssem
bly
Engineering & assembly10
11
Typhoon® fibre with polyurethane coating.
›› Especially abrasion and tear resistant.›› Great protection against cuts and punctures.›› Fitted with great touch sensitivity.›› Typhoon® is one of the strongest fibres in the world.
Suitable for: Assembly work with extremely high requirements to abrasion resistance and
where there is great risk of cut injuries. Info: Cut level: 3.
Gloves with Typhoon®
Art. 116.540
EN 420, 388
II
7 | 8 | 9 | 10 | 11
…
144 pairs (12 per bundle)
21-23 cm
Typhoon®/PU
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. II
4343
Typhoon® fibre with polyurethane coating.
›› Especially abrasion and tear resistant.›› Great protection against cuts and punctures.›› Fitted with great touch sensitivity.›› Typhoon® is one of the strongest fibres in the world.
Suitable for: Assembly work with extremely high requirements to abrasion resistance and
where there is great risk of cut injuries. Info: Cut level: 3.
Gloves with Typhoon®
Art. 116.541
EN 420, 388
II
7 | 8 | 9 | 10 | 11
…
144 pairs (12 per bundle)
21-23 cm
Typhoon®/PU
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
Abrasion resistance
Blade cut resistance
Tear resistance
Puncture resistance
cat. II
4343
Abrasion resistance
Blade cut resistance
Tear resistance
Puncture resistance
Palm with polyurethane coating.
›› Extra flexible.›› Typhoon® is one of the strongest fibres in the world.›› Especially wear proof.
Suitable for: Assembly work with high requirements topliability and where there is high risk of injury from cuts.
Info: Cut level: 5.
Gloves with Typhoon® MixtureArt. 116.560
EN 420, 388
II
8 | 9 | 10 | 11
…
144 pairs (12 per bundle)
24-28 cm
Typhoon®/PU
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. II
4542
Abrasion resistance
Blade cut resistance
Tear resistance
Puncture resistance
Engineering &
assembly
Engineering & assembly
Construction is a very complex business. No matter what you build, you are going to need two hands to perform, why it is very important that your hands are carefully protected. There are sparks, heat, cuts, pinching and crushing hazards to deal with every day.Granberg has the solutions. Give us your problem and we will help you deal with it.
12
Con
stru
ctio
n &
hea
vy d
uty
Construction & heavy duty12
Durable MicroSkin Shield® material with ProTex® membrane. Elastic nylon back. Velcro closure.
›› Waterproof, heat insulating Protex® membrane with excellent breathability.›› Warm and soft fleece lining inside the glove.›› Provides optimal protection against cold and moisture.›› Tight velcro closure and comfortable closure of neoprene at the wrist.›› Can be machine washed at 40°C.
Suitable for:Assembly work and outdoor tasks in wet and/or cold weather.
Info: Design protected in Norway and EU.
EX® Assembly Winter GlovesArt. 107.4297W
EN 420, 388, 511
II
8 | 9 | 10 | 11 | 12
Winter lined/ProTex®
120 pairs (12 per bundle)
21-24 cm
MicroSkin Shield®/nylon
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. II
1221 X20
Durable MicroSkin Shield® material, with ProTex® membrane, Spandex® back of hand.
›› Waterproof, sewn-in thermal and breathable ProTex® membrane.›› Warm fleece lining for cold conditions.›› Extra protective and vibration-dampening material sewn into palm and thumb.›› Reflectives around the cuff. ›› Can be machine washed at 40˚C.
Suitable for: Assembly work and other tasks in cold environments with high requirements to mobility, flexibility and grip.
Info: EU design protection for green high visibility details: DM/077 441.
EX® All-round Winter GlovesArt. 107.8112
EN 420, 388, 511
II
8 | 9 | 10 | 11 | 12
Winter lined/ProTex®
60 pairs (6 per bundle)
26-28 cm
MicroSkin Shield®/Spandex
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. II
1222 02X
13Construction & heavy duty
Construction &
heavy duty
Cow split leather, fully lined.
›› Strong, red colour.›› Extra long (40 cm).›› Sewn with strong, heat-resistant Kevlar® thread.
Welder’s GlovesArt. 106.1691K
Cow split leather, fully lined.
›› Withstands heat without shrinkage.›› Sturdy, long-life welding glove.›› Thumb base reinforcement.›› Sewn with strong, heat-resistant Kevlar® thread.
Welder’s GlovesArt. 106.1690K
Abrasion resistance
Blade cut resistance
Tear resistance
Puncture resistance
cat. IIcat. II 3244 41xx4x
EN 420, 388, 407
II
10
Cotton fleece
60 pairs (6 per bundle)
40 cm
Cow split leather
1,2-1,4 mm
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
EN420,388,407,12477/01+A1/05TypeA
II
8.5 | 11
Cotton fleece
60 pairs (6 per bundle)
31-35 cm
Cow split leather
1,2-1,4 mm
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:4243 412x4x
Abrasion resistance
Blade cut resistance
Tear resistance
Puncture resistance
A-grade goatskin with rubberized cuff, palm lined.
›› Soft and strong leather makes the gloves very durable and comfortable.›› Good ventilation on back of hand that is made of 100% cotton.Suitable for: Assembly work, versatile use in varied engineering and construction industries with high wear and tear requirements.
EN 420
I
9 | 10 | 11
Cotton fleece
120 pairs (12 per bundle)
26-30 cm
Goatskin
1,0-1,2 mm
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. I
Goatskin, unlined.
›› Sewn with strong, heat-resistant Kevlar®
thread.›› Soft and wear resistant.›› High touch sensitivity.Suitable for: TIG welding.
Argon GlovesArt. 106.3600K
cat. II
2112 41224x
Work GlovesArt. 113.4190
EN420,388,407,12477/01+A1/05-TypeB
II
9 | 10
Unlined
120 pairs (12 per bundle)
35 cm
Goatskin
0,9-1,0 mm
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
100% biodegradeable made of Bamboo®-fibre.
›› Coated with soft, biodegradeable Latex foam.›› Extremely comfortable and unrivalled softness compared to cotton.›› Extremely high breathable properties compared to cotton or any other synthetic fibre.›› Naturally antibacterial due to a unique antibacterial agent only found on bamboo fibre called “Bamboo Kun”.›› Naturally anti-fungal that prevents the gloves from holding odor or grow fungus even if left in moist conditions.›› Bamboo fibre is up to 4 times more absorbent than cotton.›› Bamboo fibre has natural UV protection.›› Bamboo® is a registered trademark of Granberg AS.
Suitable for: Assembly work with high requirements to touch sensitivity and grip.
Granberg Bamboo® durable assembly glovesArt. 108.0600
cat. I
EN 420
I
7 | 8 | 9 | 10
…
144 pairs (12 per bundle)
23-27 cm
Bamboo/Latex
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
EN 420, 388
II
7 | 8 | 9 | 10 | 11
…
144 pairs (12 per bundle)
21-28 cm
NFC/3G Athlet™
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
cat. II 4141
Oeko-Tex® 100 approved. With patented nitrile foam coating. Excellent breathability.
›› A revolutionary combination of superior oil grip, wet grip, dry grip, and excellent abrasion resistance combined with dexterity and tremendous breathability.›› The patented micro-capillary nitrile foam technology that is incorporated inthe gloves draws oil and water aside and thus frees up the palm surface of the glove for a solid grip.›› ANTIWET treated which ensures that liquids even on the nylon handback repels.›› Actifresh®-treated; a treatment that kills bacterias and provides a magnificent freshness.
Suitable for: Assembly and finishing | Metal fabrication | Assembly of white goods | General site & factory maintenance | Warehouse work and general handling.
Pro-Fit® Assembly glovesArt. 114.0933
Con
stru
ctio
n &
hea
vy d
uty
See next page
Food processing is an arena for bacterias and contamination. Utmost care must therefore be taken to protect the food that you shall eat. Also many people are not aware of the risk related to migration of glove materials into the food if the gloves are not approved for the particular food that you are handling. Granberg has the solutions. Give us your problem and we will help you deal with it.
14
15
NEW PRODUCT
Single-use Gloves without PhthalatesArt. 111.525
Vinyl, powder free. Clear colour.
›› Guaranteed best quality.›› Recommended for Horeca, food and beverage industry, etc.›› Free from Phthalates (plasticisers).›› Does not provoke chemical or latex allergic reaction and is therefore very skin friendly.›› May be used in direct contact with all types of food, including fatty foods.›› Recommended for healthcare sector, and approved for medical use (EN 455).
cat. III
EN 420, 374, 455, 1186
III
S | M | L | XL
…
10 boxes (100 per box)
25 cm
Vinyl
…
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:2
Single-use Gloves Magic Touch®
Art. 114.621
Soft Nitrile™. Powder free. Accelerators free. Indigo colour.
›› Soft and strong nitrile of highest quality.›› Thinner than similar gloves, nearly same elasticity and touch sensitivity as that of latex.›› 100% without chemical accelerators.›› Micro textured for optimum grip.›› Resistant to grease, fats, detergents, etc.›› Approved for medical use (EN 455).
Suitable for: Direct contact with all types of foodstuff | Medical use
* Double wall thickness (finger): 0,22 mm.
cat. III
EN 420, 374, 455, 1186
III
XS | S | M | L | XL
…
10 boxes (100 per box)
25 cm
Nitrile
0,22* mm
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
Rubber GlovesArt. 112.0122
Cotton flock lined. Blue colour.
›› Anti-slip pattern for good grip in wet and dry conditions.›› Tear-resistant beaded cuff for easy donning.›› Pure cotton flock lining to absorb perspiration.
Suitable for: Handling meat and fatty foods | Cleaning | Pharmaceutical industry | Light assembly | Laboratories.
cat. III
EN 420, 388, 374, 1186
III
S | M | L | XL
Cotton flock lined
144 pairs (12 per bundle)
30 cm
Natural latex
0,38 mm
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
1010
Single-use Gloves Magic Touch®
Art. 114.624
Soft Nitrile™. Powder free. Indigo colour.
›› Economy pack: 200 gloves per dispenser. ›› Soft and strong nitrile of highest quality.›› Thinner than similar gloves, nearly same elasticity and touch sensitivity as that of latex.›› Micro textured for optimum grip.›› Resistant to grease, fats, detergents, etc.›› Suitable for direct contact with all types of foodstuff.›› Recommended for Horeca, food and beverage industry, etc.
* Double wall thickness(finger): 0,20 mm.EN 420, 1186
0
S | M | L | XL
…
10 boxes (200 per box)
24 CM
Nitrile
0,20* mm
Standard:
Category:
Sizes:
Lining:
Packaging:
Length:
Material:
Thickness:
Food processing
Food Processing
Granberg AS Bjoavegen 1442 | 5584 Bjoa | NORWAY
Tel.: +47 53 77 53 00 | E-mail: av@granberg.no
We strive to make your job easier and more safe by offering you the best hand protection there is.
Our website will provide you with our full range of products and hand protection safety information.There you will also find a unique chemical database that will help you pick the right glove for the chemical you plan to use.
If you are interested in purchasing our products please find contact information below.
Granberg websitewww.granberg.no