GREETINGS

PresentationOn

GREEN PATH AHEAD PRISHA PROPERTIES INDIA PVT LTD.

Growth in CO2 in the Atmosphere

Worldwide Energy Use

Green Building Defined

Incorporates several Green Features

Efficient Use of Water

Energy Efficient &

Eco Friendly Equipment

Use of Renewable Energy

Use of Recycled / Recyclable

Materials

Green Building Features

• Effective Use of

Landscaping

• Effective Control &

Building Management

Systems

• Improvement indoor air

quality

for health and comfort

Green Building vs. Conventional Building

Externally : both look

alike

Building Use : both are same

Differences

Concern for human comfort

& indoor environment

Operational savings

Tangible Benefits

Reduce operating

costs

Optimize life cycleeconomic performance

Sustained saving

Energy savings:40-50%

Water savings :20-30%

Intangible Benefits of Green Design

Environmental benefits Reduce impact on the

environment

Health and Safety Benefits Enhance occupants comfort

Improve Productivity ofoccupants

World class Standards & Procedures.

Economic Benefits

Reduced operating costs

Increased building valuation

Marketing advantages

Optimizes life-cycle economic performance

Improve productivity

Reduced absenteeism and turnover

Providing a healthy workplace improves employee satisfaction

LEED India Green Building Rating System

Points for individual Credits

S.No Credits NewBuilding

Prerequisites 7

1 Sustainable Sites 13

2 Water Efficiency 6

3 Energy and Atmosphere 17

4 Materials and Resources 13

5 Indoor Environmental Quality 15

6 Innovation and Accredited Professional points 5

Total 69

Leadership in Energy & Environmental Design

LEEDfor

Homes

LEEDfor

Homes

LEEDfor

NewConstruction

LEEDfor

NewConstruction

LEEDfor

ExistingBuildings

LEEDfor

ExistingBuildings

LEEDfor

Core andShell

LEEDfor

Core andShell

LEEDfor

Factory Buildings

LEEDfor

Factory Buildings

LEED INDIAPrograms

LEED INDIAPrograms

LEEDfor SEZ

LEEDfor SEZ

LEED Rating Systems

LEED for New Construction: New construction and major renovations (the most commonly applied-for LEED certification)

LEED for Existing Buildings: Existing buildings seeking LEED certification

LEED for Core and Shell: Core-and-shell projects (total building minus tenant fit outs)

LEED for Homes: Homes LEED for SEZ

LEED NC – Point Distribution

PLUSInnovation in DesignProcess

7%

IndoorEnvironmental

Quality22%

SustainableSites20%

Water Efficiency

7%

Energy &Atmosphere

26%

Materials &Resources

19%

Sustainable Sites

Credit Title Points

Prereq 1 Erosion and Sedimentation Control Required

Credit 1 Site Selection 1Credit 2 Development Density & Community

Connectivity1

Credit 3 Brownfield Redevelopment 1

Credit 4 Alternative Transportation 1-3

Credit 5 Site Development 1-2

Credit 6 Storm Water Design 1-2

Credit 7 Heat Island Effect 1-2

Credit 8 Light Pollution Reduction 1

Total 13

Sustainable Sites

Erosion & Sedimentation Control – Taking measures to prevent soil erosion

Site Selection – Land shouldn't be a agricultural land

Development Density & Community Connectivity – It is required to have at least 10 basic services within 0.5mile radius

Brownfield Redevelopment – Rehabilitate waste land

Alternative Transportation – Public Transport Access – Bicycle Use – Alternate Fuel Vehicle – Reduce parking capacity

Sustainable Sites

Site Development – Protect or restore habitat – Maximize Open space

Storm Water Design – Minimize storm water run-off – Treat 90% of average rainfall

Heat Island Effect – Reduce heat islands on roof – Reduce heat islands on non-roof

Light Pollution Reduction – Eliminate uplights and light trespass from the building site

Alternate Transportation

Green Roof

Water Efficiency

Water Efficient Landscaping – 50% reduction of potable water for irrigation

– 100% reduction of potable water for irrigation

Water Efficiency in A/C System – 50% reduction of potable water for A/C systems

Innovative Waste Water Technologies – Treat 50% waste water onsite to tertiary standards and used on-site

Water Use Reduction – 20% reduction by maximizing water efficiency

– 30 or 40 % reduction

Water Efficient

Energy & Atmosphere

Credit Title Points

Prereq 1 Fundamental Building Systems Commissioning Required

Prereq 2 Minimum Energy Performance Required

Prereq 3 CFC Reduction in HVAC&R Equipment Required

Credit 1 Optimize Energy Performance 1-10

Credit 2 Renewable Energy 1-3

Credit 3 Additional Commissioning 1

Credit 4 Ozone Depletion 1

Credit 5 Measurement And Verification 1

Credit 6 Green Power 1

Total 13

Energy & Atmosphere

Fundamental Building System Commissioning – Ensure fundamental building elements are installed

Minimum Energy Performance – Establish minimum level of efficiency for base building and systems

Fundamental Refrigerant Management – CFC reduction in HVAC equipment

Optimize Energy Performance – Achieve increase in performance than the base case

Reduction in Design

Energy cost (%) Points14 2

17.5 321 4

24.5 5

28 6

Reduction in Design

Energy cost (%) Points31.5 7

35 838.5 9

42 10

Energy & Atmosphere

On-Site Renewable Energy – Encourage on-site renewable energy to reduce environmental impact by fossil fuel

Additional Commissioning – Verification by a third party Ozone Depletion – Avoid using HCFC refrigerants Measurement & Verification, Base Building – Ongoing

accountability of building energy consumption over time Green Power – Encourage investments in off-site renewable energy

Use of RenewableEnergy Points

2.5 1

7.5 2

12.5 3

Energy Efficient Lighting

Solar Panels

Materials & Resources

Storage and Collection of Recyclables – Providing an area for collection of recyclables

Building Reuse – Maintain 75% of existing walls, floors and roof (Applicable only for redevelopment projects)

– Maintain 95% of existing walls, floors and roof – Maintain 50% of interior non-structure elements Construction Waste Management – Redirect 50% of recyclable and

reusable materials to appropriate sites – Redirect 75% of

recyclable and reusable materials to appropriate sites Material Reuse – Reuse 5% (by cost) of building materials and

products to reduce demand for virgin materials – Reuse 10% (by cost) of building materials and

products to reduce demand for virgin materials

Materials & Resources

Recycled Content – Post consumer + ½ pre consumer = 10% cost – Post consumer + ½ pre consumer = 20%

cost Regional Materials – 10% by cost of materials extracted,

processed & manufactured regionally – 20% by cost of materials extracted,

processed & manufactured regionally Rapidly Renewable Materials – 2.5% by cost of rapidly renewable

materials (products made from plants) Certified Wood – Using 50% of Forest Stewardship Council (FSC)

certified woods

Recycling

Indoor Environmental Quality

Minimum IAQ Performance – Meeting the minimum ventilation rate as per ASHRAE 62.1.2004

Environmental Tobacco Smoke Control – Prohibit smoking inside the building

Outdoor Air Delivery Monitoring – Monitor CO2 concentration in occupied spaces

Increased Ventilation – Increase air ventilation rates to all occupied spaces by atleast 30% above the minimum rate required by ASHRAE 62.1.2004

Construction IAQ Management Plan – Reduce IAQ problems resulting from the construction/renovation process

– Reduce IAQ problems before occupancy

Indoor Environmental Quality

Low-Emitting Materials – Use low VOC Adhesives & Sealants – Use low VOC Paints & Coatings – Use low VOC Flooring systems

– Use low VOC Furniture Indoor Chemical & Pollutant Source Control – Avoid exposure to

use of potentially hazardous particulates & chemical pollutants Controllability of a System – Individual lighting control for 90% of

building occupants – Individual thermal control for

at least 50% of building occupants Thermal Comfort – Provide thermal comfort to the occupant as per

ASHRAE 55-2004 – Monitor the thermal performance of the

building within a period of 6 to 18 months after occupancy

Low Emitting Materials

Daylighting

Mold Prevention

Innovation & Design

Innovation in Design – Maximum 4 points will be awarded for exceptional performance above the requirements set by LEED for Schools Green Building Rating Systems

LEED Accredited Professional – At least one principal participant of the project team shall be a LEED Accredited Professional (AP)