HNTH30HENRYHenry Metal Lever Handle Thermostatic with Metal Cross Handle Shutoffs Trim

PRODUCT SUPPORT800.927.2120 OPT 2 | WATERWORKS.COM

PAGE 1 OF 207.19.18UPDATED ON

SHOWN IN HENRY METAL LEVER HANDLE THERMOSTATIC WITH METAL CROSS HANDLE SHUTOFFS TRIM| HNTH30

INSPIRATION

PRODUCT FEATURES

Influenced by the connection of industry and art Henry easily transitions between modern,

traditional, utilitarian and classic settings.

CODES & STANDARDS

TECHNICAL DETAILS

CERTIFICATIONS

Code # HNSV30X: Complies with ASME A112.18.1/CSA

B125.1 & ANSI A117.1 ADA. Certified with IAPMO, cUPC &

State of MA

The manufacturing process encompasses casting, turning, forging, hand-fitting and hand

polishing.

Brass material is used for components

The thermostatic valve and shutoff trims are housed neatly together on a back plate for a clean

install in the shower.

A new unique rough was engineered to house this layout which was based on our TM5

platform.

ADA Compliance: YesControl Valve Rough-in Depth Maximum: 105 mmControl Valve Rough-in Depth Minimum: 54 mmDiverter Valve Rough-in Depth Maximum: 105 mmDiverter Valve Rough-in Depth Minimum: 73 mmEscutcheon Primary Material: BrassFittings Hole Diameter: 133 mmDepth / Width: 100 mmHeight: 410 mmIntegrated Diverter: NIntegrated Spray: NLength: 221 mmNumber of Handles: ThreePivot: NPrimary Material: BrassSpout Swivel: NSpray Included in Unit: NSuggested Application: BathWater Pressure Maximum: 6.0 barWater Pressure Minimum: 1.5 barWater Pressure Recommended: 3.0 bar

HNTH30HENRYHenry Metal Lever Handle Thermostatic with Metal Cross Handle Shutoffs Trim

PRODUCT SUPPORT800.927.2120 OPT 2 | WATERWORKS.COM

PAGE 2 OF 207.19.18UPDATED ON