Post on 31-Mar-2015
transcript
Herstellung mittels Großbohrungen
CONSOIL 2005, Bordeaux, France: SpS 6 Permeable Reactive Barriers (PRBs)
in EUROPE
Ground WaterFlow Direction
Plume CleanedGround Water
PermeableReactive Barrier (PRB)
Herstellung mittels Großbohrungen
CONSOIL 2005, Bordeaux, France: SpS 6 PRBs in EUROPE: Missions
This Special Session is going to focus on actual
long term performance of engineered PRBs,
especially regarding installations that were set
up a couple of years ago,
in order to demonstrate that the technology is on
its way towards an established remediation
technology and should be/could be applied to a
higher extent in Europe.
Herstellung mittels Großbohrungen
CONSOIL 2005, Bordeaux, France: SpS 6 PRBs in EUROPE: Missions
“Focus”, however, is not supposed to exclude upcoming developments and trends in single European countries to some extent: for instance, PRBs are currently an emerging remediation technique in ITALY. Hence, it will be also of interest to get a general impression and assessment of experts who are currently involved in setting up first PRBs in their countries to learn more on their preparatory and planning work (such as in Italy).
Herstellung mittels Großbohrungen
CONSOIL 2005, Bordeaux, France: SpS 6 PRBs in EUROPE: Overview
Presentations from:1.France (2x)2.UK3.Italy (2x)4.Germany (2x, including Austria, Switzerland)5.US (covering nano iron, special outlook)
Our apologies: we won´t be able to cover any European country revealing interesting development such as Denmark or the Czech Republic
Herstellung mittels Großbohrungen
CONSOIL 2005, Bordeaux, France: SpS 6 PRBs in EUROPE: Timetable
1. Opening 11:00-11:05
2. Presentation Birke et al. 11:05-11:30
3. Presentation Schad 11:30-11:40
4. Discussion 11:40-11:50
5. Presentation Jefferis et al. 11:50-12:20
6. Discussion 12:20-12:30
Lunch (until 14:00)
Herstellung mittels Großbohrungen
CONSOIL 2005, Bordeaux, France: SpS 6 PRBs in EUROPE: Timetable
7. Presentation Garboriau et al. 14:00-14:25
8. Presentation Esnault et al. 14:25-14:35
9. Discussion 14:35-14:45
10. Presentation d´Aprile/Petrangeli Papini et
al. 14:45-15:10
11. Presentation di Molfetta 15:10-15:25
12. Discussion 15:25-15:35
Break (until 16:00)
Herstellung mittels Großbohrungen
CONSOIL 2005, Bordeaux, France: SpS 6 PRBs in EUROPE: Timetable
13. Presentation Geiger et al. 16:00-16:25
14. General Discussion 16:25-17:20
15. Recap/conclusions/wrap up, adjourn 17:20-
17:30
Herstellung mittels Großbohrungen
CONSOIL 2005, Bordeaux, France: SpS 6 PRBs in EUROPE: Issues
1. Where are we now with PRBs in 2005, especially
in Europe (overall)?
2. What is for sure, what has to be clarified /
investigated yet?
3. Which “market barriers” exist, which are currently
hampering wider application of PRBs in Europe?
4. Where and how could the European Commission
support?
5. How about further R&D requirements?
6. Prediction of further development
Herstellung mittels Großbohrungen
CONSOIL 2005, Bordeaux, France: SpS 6 PRBs in EUROPE: Issues
Herstellung mittels Großbohrungen
CONSOIL 2005, Bordeaux, France: SpS 6 PRBs in EUROPE: Issues
Herstellung mittels Großbohrungen
CONSOIL 2005, Bordeaux, France: SpS 6 PRBs in EUROPE: Issues