Post on 22-Oct-2020
transcript
HEADSIGHT.COM | 574.546.5022
Grain Header Manual09032303b
HONEYBEE NEW HOLLAND92C 94C
i
Copyright Headsight, Inc. 2014
About Headsight
Headsight Contact InfoHeadsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com Web: www.headsight.com
Technical AssistancePhone: 574-220-5511
About this Manual
How to use this manualThe instructions in this manual are in the order that they should be completed for new installations. Complete all applicable instructions in each section before proceeding. Note that some sections are labeled to indicate they only apply to certain machines or applications. An index is available in the front of the manual to help find technical information for previously installed systems.
This icon designates information of which you should take note.
This icon indicates a special tool needed for a given task.
This icon designates an important instruction.
DisclaimersHeadsight®, Horizon®, Pinpoint®, Insight®, Foresight®, Feathersight® Truesense™ and Truesight® are trademarks of Headsight, Inc. All other trademarks are property of their respective owners.
SuggestionsIf you have any suggestions to improve this manual please call 574-546-5022 or email info@headsight.com.
Headsight’s products are protected by one or more of the following US Patents 6202395, 6833299, 7310931, 7647753 and other patents pending.
ii
Table of ContentsAbout Headsight ��������������������������������������������������������������������������������������������� iAbout this Manual ������������������������������������������������������������������������������������������� iInstallation �������������������������������������������������������������������������������������������������� 1
Install Terrace Sensors (if equipped) ����������������������������������������������������������������� 2Install Standard Sensors �������������������������������������������������������������������������������� 4Install Terrace Sensor Wiring (if equipped) ��������������������������������������������������������� 6Install Standard Sensor Wiring ������������������������������������������������������������������������ 7Install Sensor Wands and Tether Cables �������������������������������������������������������������� 8Install Insight Box ���������������������������������������������������������������������������������������� 8
Sensor Adjustment ����������������������������������������������������������������������������������������� 9Terrace Sensor �������������������������������������������������������������������������������������������� 9Standard Sensor �����������������������������������������������������������������������������������������10
Parts ���������������������������������������������������������������������������������������������������������11HT7000 ���������������������������������������������������������������������������������������������������11HT8000 ���������������������������������������������������������������������������������������������������12
STATEMENT OF LIMITED WARRANTY �����������������������������������������������������������������13
1
Installation
Installation
Before working under header always:
1. Perform all combine and header manufacturer safety precautions for servicing header.
2. Insert stop to prevent movement of header.
3. Turn off combine and remove key from ignition.
4. Set combine parking brake.
5. Disconnect all drive shafts from the header.
2
Installation
Install Terrace Sensors (if equipped)
1. Line up holes of sensor and mounting bracket with spring installed short leg up and long leg back in mounting bracket.
2. Insert pin and secure with retaining ring.• Install clamp on adjusting bolt.• Adjust leveling bolt till sensor is level and lock jam
nut.
3. Tighten bolt holding clamp on side of sensor.
4. Remove standard crop divider tip.
5. Using provided hardware, bolt the large round bar bracket in place of the crop divider with the front end bent downward
3
Installation
6. Bolt the terrace sensor/bracket assembly to the end of the rod.
7. Install long poly wand with 1 inch flange bolts provided• Check that bolts ends do not extend through metal
arm
8. Repeat for other end of header
4
Installation
Install Standard Sensors
1. Determine sensor mounting location.
2. Mount outer sensors first, mounting out as far as possible (if not equipped with terrace option).
• Mount all inner sensors as evenly spaced as possible across the head
• To avoid clearance issues you may need to pre-assemble sensor and mounting brackets
3. Remove large cover from sensors, retain hardware and covers.
4. Remove bolt holding wiring clamp inside sensor as marked.
5. Mount sensors to existing header brackets with 5/16” hardware provided in back two holes.
• Leave hardware loose for routing of wiring
6. Reinstall wiring clamp and replace bolt inside sensor body in location marked.
5
Installation
7. Mount left and right outer sensors/bracket assembly to skid plates as shown.
• If you are using terrace mounts for the outer sensors skip to step 8
• Make sure that draper belt will not hit the sensor bracket
8. Mount inner sensor/bracket assemblies to brackets as shown.
• Make sure the draper belt will not hit the sensor bracket
• For headers 40 ft or wider it may be necessary to drill holes and mount the brackets directly to the skid plate behind the cutter bar to keep the sensors spaced evenly
6
Installation
Install Terrace Sensor Wiring (if equipped)
1. Attach extension wire to terrace sensor.
2. Zip tie the blue connector to the top of the square bracket.
• Place the zip tie just behind the square bracket so it is protected from crop
• The wire must remain above the metal rod so it is protected from crop
3. Run the wire inside the crop divider to the back of the head.
4. Continue to run along the back of the head to the Insight box.
• Run along OEM harness or hydraulic lines• Secure with zip ties
7
Installation
Install Standard Sensor Wiring
1. Install protective conduit on wiring coming from sensor.
2. To aid installing conduit on sensor wiring without damaging wire insulation, tape a wrench big enough to open conduit (wider then wiring harness).
3. Insert box end of wrench into conduit using it as a guide to slide conduit over wiring. Remove wrench and repeat for all other standard mount sensors.
• Outer sensor use 3 ft conduit• Inner sensor use 6 ft conduit
4. Slide conduit all the way up to sensor and fasten with two clamps.
• Clamp as shown where routing to a gusset on the right
• Clamp as shown where routing to a gusset on the left
5. Tighten all sensor mounting hardware and reinstall previously removed cover.
• Be sure not to pinch wires when reinstalling cover
8
Installation
Install Sensor Wands and Tether Cables
1. Use 5/16 x 1-1/4 flange bolts provided and fasten wand to sensor.
• Install long wands on all terrace and outer sensors• Install short wands on all inner sensor
2. Attach a tether cable to each wand.• Use a screwdriver to pry open the slit in the rear of
the wand
Tether cables are not used on terrace sensors.
3. Fasten the rear of the cable to a secure location on the header.
• Make sure that the cable cannot catch on any moving or solid parts
• Adjust the cable length so that it pulls the arm slightly (1/2”) back from its original position
Install Insight Box
1. Using supplied Hardware, attach Insight box to existing mounting bracket.
9
Sensor Adjustment
Sensor Adjustment
Insert header stop to prevent movement
Terrace Sensor
Increasing or Decreasing Voltage1. Loosen the screws indicated A.
2. Turn sensor to new location.
3. Tighten screws A.
Adjusting Voltage Swing1. Loosen jam nut B.
2. Turn Bolt to adjust.
3. Rotating bolt counter clockwise increases voltage swing
4. Rotating bolt clockwise decreases voltage swing
5. Tighten jam nut B.
Adjusting Down Pressure1. Loosen jam nut A.
2. Turn bolt to adjust tension.
3. Rotating bolt counter clockwise decreases down pressure.
4. Rotating bolt clockwise increases down pressure.
5. Tighten jam nut A.
B
AA
A
10
Sensor Adjustment
Standard Sensor
Increasing or Decreasing Voltage1. Remove sensor cover.
2. Loosen sensor mounting screws A.
3. Twist sensor to new position.• Twisting sensor clockwise (viewed from the end of
the sensor) will increase voltage.• Twisting sensor CCW will decrease voltage.
4. Tighten sensor mounting screws A.
Adjusting Down Pressure1. Remove spring cover.
2. Loosen indicated nut A.
3. Press adjustment bolt toward sensor.• Spring tension will release.
4. Preload spring to a new position.
5. Use one wrench to turn the adjustment bolt B.
6. Use a second wrench to tighten the nut A.
7. Tightening the bolt (CW) increases spring downpressure.
Make sure that the leg of the spring is fully seated in the shaft to prevent rubbing on the cover plate.
8. Reinstall cover plate.
A
B A
11
Parts
Parts
UN
LES
S O
THE
RW
ISE
SP
EC
IFIE
DD
IME
NS
ION
S A
RE
IN IN
CH
ES
DIM
EN
SIO
NS
W/O
TO
L A
RE
BA
SIC
THIR
D A
NG
LEP
RO
JEC
TIO
N
THE
INFO
RM
ATI
ON
CO
NTA
INE
D O
N T
HIS
DR
AW
ING
IS P
RO
PR
IETA
RY
TO
HE
AD
SIG
HT,
INC
. A
NY
UN
AU
THO
RIZ
ED
US
E O
F S
UC
H C
ON
TEN
TS IS
STR
ICTL
Y P
RO
HIB
ITE
D.
CH
G L
EV
EL
DATE
SH
EE
T
OF
HEA
DS
IGH
T IN
C. C
12
34
D C B A
11
EFGH
D C B AEFGH
56
78
12
34
56
78
01H
T700
0_P
AR
TS
TER
RA
CE
SE
NS
OR
PA
RTS
AP
R 1
4, 1
4
MA
TER
IAL
N/A
HT7
000_
PA
RTS
ITE
M N
UM
BE
RP
AR
T N
UM
BE
RD
ES
CR
IPTI
ON
QU
AN
TITY
1H
T711
7S
HIE
LD1
208
2001
505/
16-1
8x1/
2 S
ER
RA
TED
FLA
NG
E B
OLT
33
0810
0102
5/16
CA
BLE
CLA
MP
, 3/8
HO
LE2
408
1001
32R
ETA
ININ
G R
ING
25
0820
0145
5/16
-18
SE
RR
ATE
D F
LAN
GE
NU
T3
608
2002
135/
16-1
8x1-
3/4
HE
X B
OLT
17
HT7
105
TRIP
BA
CK
SP
RIN
G1
8H
T711
6P
IN1
908
2001
365/
16-1
8x1-
1/4
HE
X B
OLT
110
0820
0208
10-2
4x7/
8 S
HC
S4
11H
T212
8S
EN
SO
R1
1208
1001
44O
-RIN
G, S
IZE
-210
113
HT7
101
SE
NS
OR
BO
DY
114
0810
0141
BU
SH
ING
115
HT7
109
BE
AR
ING
BLO
CK
116
HT7
104
SP
RIN
G1
1708
1001
36O
-RIN
G, S
IZE
-014
118
HT7
111
SE
NS
OR
AR
M1
19H
T631
CR
OP
DIV
IDE
TIP
120
0820
0210
5/16
-18x
1 S
ER
RA
TED
FLA
NG
E B
OLT
221
0820
0212
5/16
-18x
2-1/
4 H
EX
BO
LT1
22H
T710
6S
PR
ING
AD
JUS
TIN
G C
LIP
123
HT7
01-B
UH
T701
-NLO
NG
WA
ND
, BLU
E N
YLO
NLO
NG
WA
ND
, BLA
CK
NY
LON
1
24P
FBxx
HA
RN
ES
S (x
x - L
EN
GTH
IN F
T)LE
NG
THS
: 6, 1
0, 1
7, 2
3, 3
3, &
38
1
25*
B70
00B
OLT
KIT
, IN
CLU
DE
S IT
EM
S W
ITH
AN
AS
TER
ISK
*26
HT7
000
CO
MP
LETE
SE
NS
OR
AS
SE
MB
LY S
TAN
DA
RD
(AS
SE
MB
LY E
XC
LUD
ES
ITE
MS
1, 2
0, 2
3, 2
4, &
25*
)27
HT7
001
CO
MP
LETE
SE
NS
OR
AS
SE
MB
LY F
OR
SH
ELB
OU
RN
E(A
SS
EM
BLY
EX
CLU
DE
S IT
EM
S 1
9, 2
0, 2
3, 2
4, &
25*
)
NO
TE: S
EN
SO
R C
ALI
BR
ATI
ON
TAR
GE
T H
IGH
VO
LTA
GE
= 4
.30V
(AC
CE
PTA
BLE
RA
NG
E 4
.20V
- 4.
35V
)TA
RG
ET
LOW
VO
LTA
GE
= 0
.70V
(AC
CE
PTA
BLE
RA
NG
E 0
.65V
- 0.
95V
)
1
2
3
4*
5*6*
95
1011
12
414
15
1617
18
1920
215
22
23
3*7*
13
8*
24
12
Parts
UN
LES
S O
THE
RW
ISE
SP
EC
IFIED
DIM
EN
SIO
NS
AR
E IN
INC
HE
SD
IME
NS
ION
S W
/O TO
L AR
E B
AS
IC
THIR
D A
NG
LEP
RO
JEC
TION
THE
INFO
RM
ATIO
N C
ON
TAIN
ED
ON
THIS
DR
AW
ING
IS P
RO
PR
IETA
RY
TOH
EA
DS
IGH
T, INC
. AN
Y U
NA
UTH
OR
IZED
US
E O
F SU
CH
CO
NTE
NTS
ISS
TRIC
TLY P
RO
HIB
ITED
.
CH
G LE
VE
L
DATE
SH
EE
T OF
HEA
DSIG
HT IN
C.C
12
34
DCBA
11
E F G H
DCBA E F G H
56
78
12
34
56
78
03H
T8000_PA
RTS
GR
AIN
SE
NS
OR
PA
RTS
FEB
3, 16
MA
TER
IAL
N/A H
T8000_PA
RTS
ITEM
NU
MB
ER
PA
RT N
UM
BE
RD
ES
CR
IPTIO
NQ
UA
NTITY
1 08200210
5/16-18x1 SE
RR
ATE
D FLA
NG
E B
OLT
12
HT8118
SE
NS
OR
BO
DY
13
081001025/16 C
AB
LE C
LAM
P, 3/8 H
OLE
14
082001455/16-18 S
ER
RA
TED
FLAN
GE
NU
T2
508200157
10-24x7/16 SLO
TTED
WA
SH
ER
HE
AD
HE
X S
CR
EW
26
HT2128
SE
NS
OR
1 7
HT8117
SH
AFT
18
HT862
BU
SH
ING
19
08100121R
ETA
ININ
G R
ING
110
HT863
BU
SH
ING
111
HT840
SP
RIN
G1
12H
T869A
DJU
STIN
G C
LIP1
1308200109
5/16-18x1-1/8 HE
X B
OLT
114
HT8111
LEFT C
OV
ER
115
082001505/16-18x1/2 S
ER
RA
TED
FLAN
GE
BO
LT 2
1608200237
5/16-18x1-1/4 SE
RR
ATE
D FLA
NG
E B
OLT
116A
082002375/16-18x1-1/4 S
ER
RA
TED
FLAN
GE
BO
LT 2
17H
T8115A
RM
118
HT8114
RIG
HT C
OV
ER
119
HT701-B
HT701-Y
HT701-B
UH
T701-N
HT801-B
HT801-Y
HT801-B
U
LON
G W
AN
D, B
LAC
K P
OLY
LON
G W
AN
D, Y
ELLO
W P
OLY
LON
G W
AN
D, B
LUE
NY
LON
LON
G W
AN
D, B
LAC
K N
YLO
N
SH
OR
T WA
ND
, BLA
CK
PO
LYS
HO
RT W
AN
D, Y
ELLO
W P
OLY
SH
OR
T WA
ND
, BLU
E N
YLO
N
1
20P
FBxx
HA
RN
ES
S (xx = LE
NG
TH IN
FT)LE
NG
THS
: 6, 10, 17, 23, 33, & 38
1
21H
T8000C
OM
PLE
TE S
EN
SO
R A
SS
EM
BLY
(AS
SE
MB
LY E
XC
LUD
ES
ITEM
S 19 &
16A)
(AS
SE
MB
LY IN
CLU
DE
S ITE
M 20, P
FB10)
NO
TE: S
EN
SO
R C
ALIB
RA
TION
TAR
GE
T HIG
H V
OLTA
GE
= 4.30V (A
CC
EP
TAB
LE R
AN
GE
4.20V - 4.35V
)TA
RG
ET LO
W V
OLTA
GE
= 0.70V (A
CC
EP
TAB
LE R
AN
GE
0.65V - 0.95V
)
12
345
67
89
1011
124
13
14
15
17
18
15
19
16
16A
20
13
STATEMENT OF LIMITED WARRANTY
For Headsight® Products Headsight Inc. (Headsight) warrants its new products to be free from defects in material and workmanship for a period of twelve (12) consecutive months following the date of purchase by the retail purchaser.
Headsight Inc. (Headsight) warrants its new corn sensors assemblies for a period of thirty-six (36) months.
Headsight warrants genuine Headsight replacement parts and components to be free from defects in material and workmanship for a period of six (6) consecutive months following the date of purchase or the remainder of the original equipment warranty period, whichever is longer.
Headsight’s obligation under these warranties shall be limited to repairing or replacing, free of charge to the original purchaser, any part that, in Headsight’s judgment, shows evidence of such defect.
Limitations to Warranty
This warranty does not cover:• Warranty claims directly resulting from improper installation of the product.• Any product damaged by accident, abuse, misuse, or negligence after shipment from Headsight.• Any unauthorized product alteration or modification.• Any unauthorized repairs made with parts other than genuine Headsight parts.• Any repairs performed by anyone other than Headsight or an authorized Headsight dealer unless specifically authorized
by Headsight.
Warranty Procedure• Troubleshooting should be done between farmer/dealer and Headsight through our technical assistance @
574.220.5511. • Labor reimbursement will occur only pre-arranged through Headsight technical assistance and be scheduled to a flat rate
basis or reasonable time allowance in Headsight’s judgment. • There is no mileage reimbursement. • Diagnostic time will not be reimbursed except in pre-arranged circumstances.• Warranty claims should be on typical dealer service work order with a number and name to be attached for any future
correspondence. • All warranty work must be performed, and claims submitted, within sixty (60) days of the occurrence of the claim and
within the warranty period.• All parts removed during warranty repair should be help for a period of 60 days after the warranty claim has been submit-
ted to Headsight. • Headsight, Inc. reserves the right to either inspect the product at the original retail purchaser’s location or require it to be
returned to Headsight, Inc. for inspection.
Limitation of LiabilityHeadsight makes no express warranties other than those, which are specifically described herein. Any description of the goods sold hereunder, including any reference to buyer’s specifications and any descriptions in circulars and other written material published by Headsight is for the sole purpose of identifying such goods and shall not create an express warranty that the goods shall conform to such description.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED. There are no implied warranties of merchantability or fitness of a particular purpose. This warranty states Headsight’s entire and exclusive liability and buyer’s exclusive remedy or any claim for damages in connection with the sale of furnishing of Headsight products, their design, suitability for use, installation or operation, or for any claimed defects herein. HEADSIGHT WILL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES WHATSOEVER, NO FOR ANY SUM IN EXCESS OF THE PRICE RECEIVED FOR THE GOODS FOR WHICH LIABILITY IS CLAIMED.
No representative of Headsight nor any dealer associated with Headsight has the authority to change the items of this warranty in any manner whatsoever, and no assistance to purchaser by Headsight in the repair of operation of any Headsight product shall constitute a waiver of the conditions of this warranty, nor shall such assistance extend or revive it.
Headsight reserves the right to make improvements in design or changes in specifications at any time, without incurring any obligation to owners of units previously sold. Warranty: 10/2006
P 574.546.5022 • F 574.546.57604845 3B Rd • Bremen, IN 46506info@headsight.comwww.headsight.com
About HeadsightAbout this ManualInstallationInstall Terrace Sensors (if equipped)Install Standard SensorsInstall Terrace Sensor Wiring (if equipped)Install Standard Sensor WiringInstall Sensor Wands and Tether CablesInstall Insight Box
Sensor AdjustmentTerrace SensorStandard Sensor
PartsHT7000HT8000
STATEMENT OF LIMITED WARRANTY