Post on 24-Mar-2016
description
transcript
HPV FUNWAYRMIT INDUSTRIAL DESIGN STUDIO 3 PROJECT
RODRIGO CAPATI S3238420
HPV FUNWAY
At present our roads are full of big, noisy vehicles that pollute the very air we breathe. But imagine a world without them. Where the loudest things you could hear while riding down the street are the rustle of the leaves.
Here I present to you the FUNWAY. A human powered vehicle for a no car future . A vehicledesigned to fit the needs of new mothers or fathers to help assist them in the daily grind. Anything from taking the kids to school, taking them to football practice and lugging home the groceries.
Or you could just simply use it for the leisurely weekend ride along with the kids in the back.
The funway provides seating for one adult driverand can fit 2 - 3 children of up to seven years in the passenger seat located behind the driver. It also provides you with a storage component situated just behind of the passenger seat. As well as seating and storage, a windshield is fastened to the frame to protect the occupants from the elements, such as wind, rain and dirt.
Think about it?
This could be our sustainable future, but remember, you should do it the FUNWAY.
1645
151820INCHDIAM
2256
579
2605
860
REV No. REVISION NOTE
--
DATE
-
CHECKEDDRAWN
--
CHECKED
DRAWN
DESIGNED
FILE NAME
DATE DWG TITLE
REVISIONSHEET No. SHEET SIZE
DWG No.
PROJECTSCALE
16
21
2
29
45
17
11
9
8
10
20
19
21
2327
22
14
32
33
15
12
17
6
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 passenger seat PASSENGER SEAT CUSHION 12 bike frame_final_001 HPV FRAME 13 crankset axle CRANKSET AXLE 14 driver seat DRIVER SEAT CUSHION 15 driver seat_back DRIVER SEAT SEAT BACKREST 16 dropout DROPOUT 27 passenger seat_back PASSENGER SEAT BACKREST 18 Shimano_Alfine_Crank_JEX SHIMANO ALFINE CRANK 1
9 Shimano_Alfine_CrankArm_JEX SHIMANO ALFINE CRANK ARM 1
10 Shimano_PD-A530 Pedal_LEFT_JEX SHIMANO PD-A530 PEDAL LEFT 1
11 Shimano_PD-A530 Pedal_RIGHT_JEX SHIMANO PD-A530 PEDAL RIGHT 112 spindle_left SPINDLE LEFT 113 spindle_right SPINDLE RIGHT 114 steering shaft STEERING SHAFT 115 steering wheel STEERING WHEEL 116 Velocity_20inch_wheel_w-hub_JEX VELOCITY 20INCH WHEEL W/HUB 2
17Velocity_20inch_wheel_w-Shimano 8 Speed Internal Hub & Shimano RT-62M Disc Brake_JEX
VELOCITY 20INCH WHEEL W/SHIMANO 8 SPEED INTERNAL HUB & RT-62M DISC BRAKE 1
18 pivot_plate_001 PIVOT PLATE 119 tie_rod_end_001 TIE ROD END MALE 420 tie rod_shaft_001 TIE ROD SHAFT 221 windshield_001 WINDSHIELD 122 storage assembly STORAGE-SA 003 123 heavy hex bolt_am_mod_M10-
001_short HEX BOLT M10-SHORT 4
24 straight bevel gear_90degree_mod STRAIGHT BEVEL GEAR 90 DEGREE BEND 125 straight gear_mod-001 STRAIGHT GEAR 126 straight angled gear STRAIGHT ANGLED GEAR 127 washer WASHER 10MM 3728 hex flange nut_am_mod HEX FLANGE NUT 629 heavy hex bolt_am_mod_M10-001 HEX BOLT M10-REG 1030 washer and nut WASHER AND NUT-SA 005 1031 heavy hex am bolt_w_washer HEX BOLT M10-REG WITH WASHER 432 steering hub STEERING HUB 133 steering handle grip STEERING HANDLE GRIP 234 heavy hex bolt_am_mod_M10-001_v
long HEX BOLT M10-EX LONG 1
35 heavy hex bolt_am_mod_M10-001_long HEX BOLT M10-LONG 1
REV No. REVISION NOTE
--
DATE
-
CHECKEDDRAWN
--
CHECKED
DRAWN
DESIGNED
FILE NAME
DATE DWG TITLE
REVISIONSHEET No. SHEET SIZE
DWG No.
PROJECTSCALE
REV No. REVISION NOTE
--
DATE
-
CHECKEDDRAWN
--
CHECKED
DRAWN
DESIGNED
FILE NAME
DATE DWG TITLE
REVISIONSHEET No. SHEET SIZE
DWG No.
PROJECTSCALE