Post on 16-Jul-2015
transcript
Invisible flange joint aluminium 20 mmThis special aluminum flange permits 20 mm the ducts to be joined with extremely low leakage. The bars are supplied in 4 meter lengths.
Invisible flange joint aluminium 30 mm
This special aluminum flange permits 30 mm the ducts to be joined with extremely low leakage. The bars are supplied in 4 meter lengths.
Invisible flange joint polymer 20 mm
This special polymer flange permits 20 mm the ducts to be joined with extremely low leakage. The bars are supplied in 4 meter lengths.
Tee connector flange joint 20/30 mm
This flange permits the flanging of one duct into the side of another take-offs as tap-in or plenum chamber. The bars are supplied in 4 meter length.
H polymer bayonet
Built in shock-resistant polymer, this piece permits "invisible flanges" to be connected. Supplied in 4 meter rods
Insulating flange for ducting: Polymer & Aluminum Composition, sub-structure, withplastic core, forming no cold bridge effect, which blocking the cold metal profiles,thermal conductivity, improved compartment temperature, thermal performance ofexisting technology products.
Insulating flange type-invisible flange joint Insulating angle flange
" F" section bar in aluminum or polymer -20/30mmPermits all accessories with fastening frames higher than 20 mm to be fastened to the ducts. Supplied in 4 meter rods
Chair section bar in aluminum or polymer - 30 mm
Used to fasten ducts to air handling units and in the assembly of linear diffusers. This section bar is supplied in 4 meter rods.
Reinforcement section bar in aluminum
Special high stiffness aluminum alloy reinforcement section bar. Bars are supplied in 4 meters rods
Aluminum shaped disk
Aluminum disk to distribute the pressure created at the centre over a wider surface to prevent damage to the panel. Disk diameter 100mm, hole diameter 10 mm.
Glues, tapes and sealants
Paint glue 3kg, only for PU/PIR composite panels ducting, special glue formulated to obtain perfect adhesion on easy panels foam. The product is supplied ready-to-use.
Easy aluminum tape
Self-adhesive aluminum tape to use in the construction of the ducts.Supply: 30 meters roll and 24 rolls pack.
Duct Sealant
Medium-viscosity adhesive for the gluing of aluminum and Polymer section bars. 500 gr pack.
Yuansen DuctTo provide the best solution for your ducting needs with . Our pre insulated ducts (PIR) have an excellent insulation properties, lightweight material, and great durability. PIR Duct (Polyisocyanurate Rigid Form) is an improvement from PUR Duct (Poly Urethane Rigid Form) with better fire retardancy, higher density and better R value.
Thanks for your inquiry.