Post on 25-Jul-2016
description
transcript
Dust-free for Every Project
Sands wood, metal or drywall
• Eliminates 95% of dust when sanding
• Uses standard, replace-able sanding sponges
• For use with any wet-dry vacIncludes two medium- grit sanding sponges including an angled sponge for corners
Part #09160 Patent Pending
HYDE TOOLSPutty Knives & ScrapersMulti-tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Putty knives & scrapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Pull-scrapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Heavy duty scrapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Sanding toolsDust-free sanding tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16Pole sanders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18Hand sanders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19Sanding screens & sponges . . . . . . . . . . . . . . . . . . . . . . . . .19
BrushesMaxxGriP® wire brushes . . . . . . . . . . . . . . . . . . . . . . . . . . .20Wire stripping & scrub brushes . . . . . . . . . . . . . . . . . . . . . .21Wood-handled wire brushes . . . . . . . . . . . . . . . . . . . . . . . .21Mini brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Glass ToolsGlass/razor scrapers & blades . . . . . . . . . . . . . . . . . . . . . .22Glazing tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Water ToolsHyde® PivotJet® hose attachment . . . . . . . . . . . . . . . . . . .24
Pressure WashingPivoting wands for use with pressure washers . . . . . .26Spray tips & nozzles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Airless Spray ToolsSpray guns & poles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28Spray shields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Painting AccessoriesSpecialty rollers & roller grids. . . . . . . . . . . . . . . . . . . . . . . .30Mixers & multi-tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Paint shields & guides . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30Paint accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Painters’ multi-tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Wall RepairWall patches & patching tools . . . . . . . . . . . . . . . . . . . . . . .34Drywall clips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Wall patching tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Drywall ToolsTaping knives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Finishing trowels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Joint knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38Corner tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40installation tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41Drywall hawks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41Drywall tapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41Joint tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42Mud pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43Texture & knockdown tools . . . . . . . . . . . . . . . . . . . . . . . . . .43
MasonryBrick tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44Concrete tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44Mixers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44Margin trowels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44Wire brushes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Tile & Caulk Toolsadhesive trowels & spreaders . . . . . . . . . . . . . . . . . . . . . . .46Tile installation & repair tools . . . . . . . . . . . . . . . . . . . . . . . .48Caulk repair tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48Caulk guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49
Flooring ToolsCarpet & flooring knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50Heavy duty scrapers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Wallcovering ToolsWallpaper hanging tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Wallpaper removal tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Knives & BladesUtility knives & blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54Snap-off knives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55roofing & flooring knives . . . . . . . . . . . . . . . . . . . . . . . . . . . .57industrial knives & blades . . . . . . . . . . . . . . . . . . . . . . . . . . .58
IndexNumerical index by item number . . . . . . . . . . . . . . . . . . . .63
4 36
16
44
22
24
20
46
50
52
54
63
26
28
30
34
Do it the HYDE® way at hydetools.com
Dust-free for Every Project
Sands wood, metal or drywall
• Eliminates 95% of dust when sanding
• Uses standard, replace-able sanding sponges
• For use with any wet-dry vacIncludes two medium- grit sanding sponges including an angled sponge for corners
Part #09160 Patent Pending
As the definitive brand leader in surface preparation and finishing, Hyde tools is serious about growing business for those who sell to professional contractors and do-it-yourself “pros” at home. our full category solutions and high-impact assortments offer competitively priced programs that are well- supported and based on a brand that users know and trust. We work hard to provide innovative new tools that solve problems and help professionals and homeowners work faster and easier, with better results.
Please explore our catalog and contact your HYDE® sales rep to learn how we can help you energize your home improvement sales in multiple categories. or call Hyde tools customer service at 800-872-4933 or 508-764-4344.
• surface Preparation
• Paint accessories
• airless spray
• Drywall
• Masonry
• Flooring & tile
• Pressure Washing accessories
• Water Cleaning tools
Do it the HYDE® way at hydetools.com
Increase sales the HYDE® way.get more sales per square foot with HYDE® merchandisers and wall assortments.
As the definitive brand leader in surface preparation and finishing, Hyde tools is serious about growing business for those who sell to professional contractors and do-it-yourself “pros” at home. our full category solutions and high-impact assortments offer competitively priced programs that are well- supported and based on a brand that users know and trust. We work hard to provide innovative new tools that solve problems and help professionals and homeowners work faster and easier, with better results.
Please explore our catalog and contact your HYDE® sales rep to learn how we can help you energize your home improvement sales in multiple categories. or call Hyde tools customer service at 800-872-4933 or 508-764-4344.
• surface Preparation
• Paint accessories
• airless spray
• Drywall
• Masonry
• Flooring & tile
• Pressure Washing accessories
• Water Cleaning tools
Do it the HYDE® way at hydetools.com
Increase sales the HYDE® way.get more sales per square foot with HYDE® merchandisers and wall assortments.
PUTTY KNIVES & SCRAPERSDo it the HYDE® way at hydetools.com
Pro Stainless™ The new stainless standard!
Pro Project ™
Black & Silver®
Choice of the Professional for decades
Value Series™
Patented design
Stainless steel blade resists rust
Double hollow-ground flex blades for perfect flex point & longer life
Differentiated overmold handles for scraping and spreading
Full, durable alloy Hammer Head® end for setting nails & positioning boards
High-impact, solvent-resistant nylon handle
High-carbon steel blades, hardened for durability
Double-ground flexible blades for perfect flex point & longer life
Full-tang blade for chiseling and handle durability
Die-cast Hammer Head® end for setting nails & positioning boards
Patented design
Straight-ground blades for flexibility
Carbon steel blades, hardened for durability
Differentiated overmold handles for scraping and spreading
Die-cast Hammer Head® end for setting nails & positioning boards
Brass blade options available
Patented product
Stamped carbon steel blade, hardened for durability
Ergonomic shape for comfortable grip
A total category solution in putty knives and scrapers.
5
PUTTY KNIVES & SCRAPERSStainless SteelMulti-tools
Pro Stainless™
These premium quality tools have a rust-resistant stainless steel blade that is double hollow-ground for the perfect flex point. Superior grip has overmold cushioning for prolonged patching jobs. Full, durable Hammer Head® end for setting nails and screws. .055" thick blade. Guaranteed forever.
06988 Pro Stainless™ 8-in-1 Multi-ToolHeavy-duty multi-tool with 3" stiff rust-resistant steel scraper blade. also includes: putty remover; spreader; half round cut-out cleans paint rollers; sharp point opens cracks for patching; die cast metal Hammer Head® end sets drywall nails; nail puller; flat end opens paint can lids.*Labeled, 0.8lb, 5pk
06986 Pro Stainless™ 6-in-1 Multi-Tool6 tools in 1. includes: 2-1/2" stiff rust-resistant steel scraper blade. Putty remover. Spreader. Half round cut-out cleans paint rollers. Sharp point opens cracks for patching. Die cast metal Hammer Head® end for setting drywall nails; flat end opens paint can lids.*Labeled, 0.8lb, 5pk
Black & Silver®
Highest quality Black & Silver® putty knives and scrapers with rust-resistant stainless steel blades and durable nylon handles. .050" thick, full-tang blade. Guaranteed forever.
01870 Black & Silver® Stainless Steel 6-in-1 Multi-Tool6 tools in 1. includes: 2-1/2" scraper blade. Putty remover. Spreader. Half round cut-out cleans paint rollers. Sharp point opens cracks for patching. Hammer Head® end for resetting popped nails and screws; flat end opens paint can lids.*Labeled, 1.0lb, 5pk
High Carbon Steel Multi-tools
Black & Silver®
Time-tested, pro-approved Black & Silver® tools have a high-carbon steel blade and durable nylon handle. .055" thick, full-tang blade. Guaranteed forever.
02970 Black & Silver® 5-in-1 Multi-Tool
5 tools in 1. includes: 2-1/2" high-carbon steel scraper blade. Putty remover. Spreader. Half round cut-out cleans paint rollers. Sharp point opens cracks for patching; flat end opens paint can lids.
*Labeled, 1.0lb, 5pk
02980 Black & Silver® 6-in-1 Multi-Tool with Hammer Head® end
all the features of the 02970 plus a metal Hammer Head® end for resetting popped nails and screws; flat end opens paint can lids.
*Labeled, 1.2lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
Pro Stainless™ The new stainless standard!
Pro Project ™
Black & Silver®
Choice of the Professional for decades
Value Series™
Patented design
Stainless steel blade resists rust
Double hollow-ground flex blades for perfect flex point & longer life
Differentiated overmold handles for scraping and spreading
Full, durable alloy Hammer Head® end for setting nails & positioning boards
High-impact, solvent-resistant nylon handle
High-carbon steel blades, hardened for durability
Double-ground flexible blades for perfect flex point & longer life
Full-tang blade for chiseling and handle durability
Die-cast Hammer Head® end for setting nails & positioning boards
Patented design
Straight-ground blades for flexibility
Carbon steel blades, hardened for durability
Differentiated overmold handles for scraping and spreading
Die-cast Hammer Head® end for setting nails & positioning boards
Brass blade options available
Patented product
Stamped carbon steel blade, hardened for durability
Ergonomic shape for comfortable grip
06985 17-in-1 Painter’s Tool
This rugged multi-tool has an overmold handle with a thumb stop for safety and a durable, carbon steel blade. This high-quality, lightweight tool can: 1. scrape paint 2. spread compound 3. open cracks in plaster 4. pull nails 5. open paint cans 6. set nails 7. clean paint rollers 8. clean mini rollers 9. open bottles 10/11. 3/4" and 11/16" wrenches to connect a whip hose to a spray gun and an airless hose. The remaining six applications: four different screw- driver bits securely fitted under the Hammer Head® end plus a combination scribe/nail set. .072" thick blade. Patent pending.
*Labeled, 0.8lb, 5pk
A total category solution in putty knives and scrapers.
76
PUTTY KNIVES & SCRAPERSHardwood HandlePro-quality tools with solvent- resistant hardwood handles. High-carbon steel blades are individually ground, polished and clear coated. Full-tang blade for strength and durability.
07975 ProWood™ Extra Heavy Duty 5-in-1 Multi-Tool5 tools in 1. includes: 2-1/2" stiff heavy-duty high-carbon steel scraper. Putty remover. Spreader. Half round cut-out cleans paint rollers. Sharp point opens cracks for patching; flat end opens paint can lids.*Labeled, 1.6lb, 5pk
Carbon Steel Multi-tools
Pro Project™
High-quality tools with an overmold comfort grip and Hammer Head® end for resetting popped nails and screws. Carbon steel blades are hardened for durability. Patent #5956799 and #6726868.
06993 Pro Project™ 14-in-1 Multi-Tool with 4 Screw BitsThe ultimate junk drawer tool! One high-quality, handy tool scrapes paint, spreads compound, cleans rollers, removes putty, opens cracks, sets nails, scrapes con-tours, scrapes convex surfaces, opens cans and bottles and pulls nails; flat end opens paint can lids. Plus four different screwdriver bits are securely stored in a pullout drawer in the handle and insert into the handle end for quick, easy use. 3" stiff scraping blade. US*Labeled, 1.75lb, 5pk
06920 Pro Project™ 10-in-1 Multi-Tool with 4 Screw BitsCarry 1 tool for many jobs. Scrape paint, spread compound, clean rollers, remove putty, open cracks, set popped nails with Hammer Head® end. Plus, 4 different screw-driver bits are securely stored in a pull-out drawer in the handle and can be inserted into the handle end for quick, easy use. 2-1/2" stiff scraping blade; flat end opens paint can lids.*Labeled, 1.1lb, 4pk
06992 Pro Project™ 6-in-1 Multi-Tool
6 tools in 1. includes: 2-1/2" stiff carbon steel scraper blade. Putty remover. Spreader. Half round cut-out cleans paint rollers. Sharp point opens cracks for patching. Die cast metal Hammer Head® end for setting drywall nails; flat end opens paint can lids.
*Labeled, 0.8lb, 5pk
Value Series™
Economical tools with ergonomic handle shaped for comfort. Stamped Carbon steel blades.
04971 Value Series™ 5-in-1 Multi-Tool
2-1/2" scraper blade. Putty remover. Spreader. Half round cut-out removes paint from paint rollers. Sharp point opens cracks for patching; flat end opens lids.
*Labeled, 0.7lb, 5pk
Brass Multi-tools
Black & Silver®
Heavy duty Black & Silver® brass tools have stiff, non-spark blades for scraping delicate surfaces or work-ing in volatile environments. Full-tang blade. Guaranteed forever.
02975 Black & Silver® Brass 5-in-1 Multi-Tool
5 tools in 1. includes: 2-1/2" scrap-er with non-spark brass blade for scraping delicate surfaces or work-ing in volatile environments. Putty remover. Spreader. Half round cut-out cleans paint rollers. Sharp point opens cracks for patching; flat end opens paint can lids.
*Labeled, 2.0lb, 10pk
Pro Project™
High-quality tools with stiff nonspark brass blades for scraping deli-cate surfaces or working in volatile environments. Overmold comfort grip and Hammer Head® end for resetting nails and screws. Blades hardened for durability.
06971 Pro Project™ Brass 5-in-1 Multi-Tool
5 tools in 1. includes: 2-1/2" stiff scraper with non-spark brass blade for scraping. Putty remover. Spreader. Half round cut-out cleans paint rollers. Sharp point opens cracks for patching; flat end opens paint can lids.
*Labeled, 0.8lb, 5pk
Stainless Steel Putty Knives and Scrapers
Pro Stainless™
These premium quality tools have a rust-resistant stainless steel blade that is double hollow-ground for the perfect flex point. Superior grip has overmold cushioning for prolonged patching jobs. Full, durable Hammer Head® end for setting nails and screws. .055” thick scrap-ing blades. Guaranteed forever.
06258 1-1/4" Stiff Pro Stainless™ Putty Knife*Labeled, 0.7lb, 5pk
06108 1-1/2" Flexible Pro Stainless™ Putty Knife*Labeled, 0.7lb, 5pk
06158 1-1/2" Stiff Pro Stainless™ Scraper*Labeled, 0.7lb, 5pk
06228 2" Flexible Pro Stainless™ Putty Knife*Labeled, 0.7lb, 5pk
06308 2" Stiff Pro Stainless™ Putty Knife*Labeled, 0.7lb, 5pk
06358 3" Flexible Pro Stainless™ Joint Knife*Labeled, 0.8lb, 5pk
06408 3" Stiff Pro Stainless™ Scraper*Labeled, 0.8lb, 5pk
06578 4" Flexible Pro Stainless™ Joint Knife*Labeled, 0.9lb, 5pk
06579 4" Stiff Pro Stainless™ Scraper*Labeled, 1.8lb, 5pk
06778 5" Flexible Pro Stainless™ Joint Knife*Labeled, 1.0lb, 5pk
06878 6" Flexible Pro Stainless™ Joint Knife
*Labeled, 1.1lb, 5pk
06107 1-1/2" Flexible SuperFlexx™ Stainless Steel Putty Knife*Labeled, 0.6lb, 5pk
06257 2" Flexible SuperFlexx™ Stainless Steel Putty Knife*Labeled, 0.7lb, 5pk
06357 3" Flexible SuperFlexx™ Stainless Steel Putty Knife*Labeled, 0.7lb, 5pk
06557 4" Flexible SuperFlexx™ Stainless Steel Putty Knife*Labeled, 0.9lb, 5pk
06757 5" Flexible SuperFlexx™ Stainless Steel Putty Knife*Labeled, 0.9lb, 5pk
06857 6" Flexible SuperFlexx™ Stainless Steel Putty Knife*Labeled, 0.9lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
Hammer Head® Endfor resetting popped nails and screws
Overmold Comfort Grip
Stainless Steel Bladewith a thinner, hollow grind profile, is 25% more flexible than other stainless steel
Easy-to-Remove New Label
SuperFlexx™ StainlessMade specifically for the dry-wall pro, these rust-resistant stainless steel blades com-bine a rockwell hardness that resists dulling and wear with much greater flexibility than other stainless steel tools on the market. a thinner hollow grind profile and flex point give these the flexible feel that many pros prefer for mudding and taping walls.Overmold comfort grip and Hammer Head® end for resetting popped nails and screws.
7
06228 2" Flexible Pro Stainless™ Putty Knife*Labeled, 0.7lb, 5pk
06308 2" Stiff Pro Stainless™ Putty Knife*Labeled, 0.7lb, 5pk
06358 3" Flexible Pro Stainless™ Joint Knife*Labeled, 0.8lb, 5pk
06408 3" Stiff Pro Stainless™ Scraper*Labeled, 0.8lb, 5pk
06578 4" Flexible Pro Stainless™ Joint Knife*Labeled, 0.9lb, 5pk
06579 4" Stiff Pro Stainless™ Scraper*Labeled, 1.8lb, 5pk
06778 5" Flexible Pro Stainless™ Joint Knife*Labeled, 1.0lb, 5pk
06878 6" Flexible Pro Stainless™ Joint Knife
*Labeled, 1.1lb, 5pk
06107 1-1/2" Flexible SuperFlexx™ Stainless Steel Putty Knife*Labeled, 0.6lb, 5pk
06257 2" Flexible SuperFlexx™ Stainless Steel Putty Knife*Labeled, 0.7lb, 5pk
06357 3" Flexible SuperFlexx™ Stainless Steel Putty Knife*Labeled, 0.7lb, 5pk
06557 4" Flexible SuperFlexx™ Stainless Steel Putty Knife*Labeled, 0.9lb, 5pk
06757 5" Flexible SuperFlexx™ Stainless Steel Putty Knife*Labeled, 0.9lb, 5pk
06857 6" Flexible SuperFlexx™ Stainless Steel Putty Knife*Labeled, 0.9lb, 5pk
*Retailer Pack Information
Hammer Head® Endfor resetting popped nails and screws
Overmold Comfort Grip
Stainless Steel Bladewith a thinner, hollow grind profile, is 25% more flexible than other stainless steel
Easy-to-Remove New Label
SuperFlexx™ StainlessMade specifically for the drywall pro, these rust-resistant stainless steel blades combine a Rockwell hardness that resists dulling and wear with much greater flexibility than other stainless steel tools on the market. A thinner hollow grind profile and flex point give these the flexible feel that many pros prefer for mudding and taping walls.Overmold comfort grip and Hammer Head® end for resetting popped nails and screws.
98
PUTTY KNIVES & SCRAPERSStainless SteelPutty Knives & Scrapers
Black & Silver®
Highest quality Black & Silver® putty knives and scrapers with rust-resistant stainless steel blades and durable nylon handles. Full-tang blade. Guaranteed forever.
01240 1-5/16" Stiff Black & Silver® Stainless Steel Chisel Putty Knife
with chisel edge for getting under paint and coatings more easily.
*Labeled, 0.8lb, 5pk
01040 1-1/2" Flexible Black & Silver® Stainless Steel Putty Knife*Labeled, 0.7lb, 5pk
01140 1-1/2" Stiff Black & Silver® Stainless Steel Putty Knife*Labeled, 0.9lb, 5pk
01150 2" Flexible Black & Silver® Stainless Steel Putty Knife*Labeled, 1.3lb, 5pk
01340 3" Flexible Black & Silver® Stainless Steel Joint Knife*Labeled, 1.0lb, 5pk
01440 3" Stiff Black & Silver® Stainless Steel Chisel Scraper
with chisel edge for getting under paint and coatings more easily.
*Labeled, 1.4lb, 5pk
01540 4" Flexible Black & Silver® Stainless Steel Joint Knife*Labeled, 1.0lb, 5pk
01550 4" Flexible Black & Silver® Stainless Steel Joint Knife
with Hammer Head® end for resetting nails and screws.
*Labeled, 1.3lb, 5pk
01740 5" Flexible Black & Silver® Stainless Steel Joint Knife*Labeled, 1.2lb, 5pk
01750 5" Flexible Black & Silver® Stainless Steel Joint Knife
with Hammer Head® end for resetting nails and screws.
*Labeled, 1.4lb, 5pk
01840 6" Flexible Black & Silver® Stainless Steel Joint Knife*Labeled, 1.4lb, 5pk
01850 6" Flexible Black & Silver® Stainless Steel Joint Knife
with Hammer Head® end for resetting nails and screws.
*Labeled, 1.5lb, 5pk
High-Carbon SteelPutty Knives & Scrapers
Black & Silver®
Time-tested, pro-approved Black & Silver® tools have a high- carbon steel blade and durable nylon handle. Hollow-ground, .055" thick, full-tang blade. Guaranteed forever.
02005 3/4" Flexible Black & Silver® Putty Knife*Labeled, 0.7lb, 5pk
02205 3/4" Stiff Black & Silver® Chisel Putty Knife
with chisel edge for getting under paint and coatings more easily.
*Labeled, 0.5lb, 5pk
02565 3/4" Stiff Black & Silver® Chisel Putty Knife
with chisel edge and a Hammer Head® end for resetting popped nails and screws.
*Labeled, 0.9lb, 5pk
02000 1-1/4" Flexible Black & Silver® Putty Knife*Labeled, 0.7lb, 5pk
02050 1-1/4" Stiff Black & Silver® Putty Knife*Labeled, 0.8lb, 5pk
02070 1-1/4" Stiff Black & Silver® Bent Blade Putty Knife
with blade angled 20° and electro-coated for rust prevention.
*Labeled, 1.6lb, 10pk
02200 1-5/16" Stiff Black & Silver® Chisel Putty Knife
with chisel edge for getting under paint and coatings more easily. .075" thick blade.
*Labeled, 1.0lb, 5pk
02100 1-1/2" Flexible Black & Silver® Putty Knife*Labeled, 0.7lb, 5pk
02150 1-1/2" Stiff Black & Silver® Putty Knife*Labeled, 1.0lb, 5pk
02102 1-1/2" SuperFlexx™ Black & Silver® Putty Knife
with blade that has been ground for extra flexibility.
*Labeled, 1.6lb, 5pk
02250 2" Flexible Black & Silver® Putty Knife*Labeled, 0.9lb, 5pk
02300 2" Stiff Black & Silver® Putty Knife*Labeled, 1.1lb, 5pk
02350 3" Flexible Black & Silver® Joint Knife*Labeled, 1.3lb, 5pk
02355 3" Flexible Black & Silver® Joint Knife
with a Hammer Head® end for resetting popped nails and screws.
*Labeled, 1.2lb, 5pk
02352 3" SuperFlexx™ Black & Silver® Joint Knife
with blade that has been ground for extra flexibility.
*Labeled, 1.1lb, 5pk
02400 3" Stiff Black & Silver® Chisel Scraper
with chisel edge for getting under paint and coatings more easily.
*Labeled, 1.6lb, 5pk
02568 3" Stiff Black & Silver® Chisel Scraper
with chisel edge and Hammer Head® end for resetting nails and screws.
*Labeled, 1.6lb, 5pk
02500 3-1/2" Flexible Black & Silver® Joint Knife*Labeled, 1.2lb, 5pk
02550 4" Flexible Black & Silver® Joint Knife*Labeled, 1.0lb, 5pk
02570 4" Flexible Black & Silver® Joint Knife
with Hammer Head® end for resetting nails and screws.
*Labeled, 1.4lb, 5pk
02600 4" Extra Heavy Duty Stiff Black & Silver® Chisel Scraper
with chisel edge for getting under paint and coatings more easily.
*Labeled,1.8lb, 5pk
02750 5" Flexible Black & Silver® Joint Knife*Labeled, 1.3lb, 5pk
02770 5" Flexible Black & Silver®Joint Knife
with Hammer Head® end for resetting nails and screws.
*Labeled, 1.5lb, 5pk
02850 6" Flexible Black & Silver® Joint Knife*Labeled, 1.4lb, 5pk
02870 6" Flexible Black & Silver® Joint Knife
with Hammer Head® end for resetting nails and screws.
*Labeled, 1.5lb, 5pk
02852 6" SuperFlexx™ Black & Silver® Joint Knife
with extra flexibility for applying, smoothing and feathering.
*Labeled, 1.2lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
9
02200 1-5/16" Stiff Black & Silver® Chisel Putty Knife
with chisel edge for getting under paint and coatings more easily. .075" thick blade.
*Labeled, 1.0lb, 5pk
02100 1-1/2" Flexible Black & Silver® Putty Knife*Labeled, 0.7lb, 5pk
02150 1-1/2" Stiff Black & Silver® Putty Knife*Labeled, 1.0lb, 5pk
02102 1-1/2" SuperFlexx™ Black & Silver® Putty Knife
with blade that has been ground for extra flexibility.
*Labeled, 1.6lb, 5pk
02250 2" Flexible Black & Silver® Putty Knife*Labeled, 0.9lb, 5pk
02300 2" Stiff Black & Silver® Putty Knife*Labeled, 1.1lb, 5pk
02350 3" Flexible Black & Silver® Joint Knife*Labeled, 1.3lb, 5pk
02355 3" Flexible Black & Silver® Joint Knife
with a Hammer Head® end for resetting popped nails and screws.
*Labeled, 1.2lb, 5pk
02352 3" SuperFlexx™ Black & Silver® Joint Knife
with blade that has been ground for extra flexibility.
*Labeled, 1.1lb, 5pk
02400 3" Stiff Black & Silver® Chisel Scraper
with chisel edge for getting under paint and coatings more easily.
*Labeled, 1.6lb, 5pk
02568 3" Stiff Black & Silver® Chisel Scraper
with chisel edge and Hammer Head® end for resetting nails and screws.
*Labeled, 1.6lb, 5pk
02500 3-1/2" Flexible Black & Silver® Joint Knife*Labeled, 1.2lb, 5pk
02550 4" Flexible Black & Silver® Joint Knife*Labeled, 1.0lb, 5pk
02570 4" Flexible Black & Silver® Joint Knife
with Hammer Head® end for resetting nails and screws.
*Labeled, 1.4lb, 5pk
02600 4" Extra Heavy Duty Stiff Black & Silver® Chisel Scraper
with chisel edge for getting under paint and coatings more easily.
*Labeled,1.8lb, 5pk
02750 5" Flexible Black & Silver® Joint Knife*Labeled, 1.3lb, 5pk
02770 5" Flexible Black & Silver®Joint Knife
with Hammer Head® end for resetting nails and screws.
*Labeled, 1.5lb, 5pk
02850 6" Flexible Black & Silver® Joint Knife*Labeled, 1.4lb, 5pk
02870 6" Flexible Black & Silver® Joint Knife
with Hammer Head® end for resetting nails and screws.
*Labeled, 1.5lb, 5pk
02852 6" SuperFlexx™ Black & Silver® Joint Knife
with extra flexibility for applying, smoothing and feathering.
*Labeled, 1.2lb, 5pk
*Retailer Pack Information
1110
PUTTY KNIVES & SCRAPERSHardwood HandlesPro-quality tools with solvent- resistant hardwood handles. High- carbon steel blades are individually ground, polished and clear coated.
Flexible Bladesfor applying compounds, smoothing and scraping.
07010 1-1/4" Flexible Putty Knife, Hardwood Handle*Labeled, 0.8lb, 5pk
07060 1-1/4" Stiff Putty Knife, Hardwood Handle*Labeled, 0.9lb, 5pk
07210 1-1/4" Extra Heavy Duty Stiff Chisel Putty Knife, Hardwood Handle*Labeled, 1.0lb, 5pk
07110 1-1/2" Flexible Putty Knife, Hardwood Handle*Labeled, 0.9lb, 5pk
07160 1-1/2" Stiff Putty Knife, Hardwood Handle*Labeled, 1.0lb, 5pk
07360 3" Flexible Joint Knife, Hardwood Handle*Labeled, 1.1lb, 5pk
07410 3" Stiff Chisel Scraper, Hardwood Handle*Labeled, 1.6lb, 5pk
07745 4" Flexible Joint Knife, Hardwood Handle*Labeled, 1.3lb, 5pk
07760 5" Flexible Joint Knife, Hardwood Handle *Labeled, 1.4lb, 5pk
07860 6" Flexible Joint Knife, Hardwood Handle*Labeled, 1.5lb, 5pk
Carbon Steel Putty Knives & Scrapers
Pro Project™
High-quality tools with an overmold comfort grip and Hammer Head® end for resetting popped nails and screws. Ground and polished carbon steel blades are hardened for durability.
06101 1-1/2" Flexible Pro Project™ Putty Knife*Labeled, 0.7lb, 5pk
06151 1-1/2" Stiff Pro Project™ Scraper*Labeled, 0.7lb, 5pk
06222 2" Flexible Pro Project™ Putty Knife*Labeled, 0.7lb, 5pk
06221 2" Stiff Pro Project™ Scraper*Labeled, 0.7lb, 5pk
06351 3" Flexible Pro Project™ Joint Knife*Labeled, 0.8lb, 5pk
06401 3" Stiff Pro Project™ Chisel Scraper*Labeled, 0.8lb, 5pk
06571 4" Flexible Pro Project™ Joint Knife*Labeled, 0.9lb, 5pk
06771 5" Flexible Pro Project™ Joint Knife*Labeled, 1.0lb, 5pk
06872 6" Flexible Pro Project™ Joint Knife*Labeled, 1.1lb, 5pk
Value Series™ Economical tools with ergonomic handle shaped for comfort. Stamped Carbon steel blades.
04060 1-1/8" Flexible Value Series™ Putty Knife*Labeled, 0.8lb, 5pk
04101 1-1/2" Flexible Value Series™ Putty Knife*Labeled, 0.7lb, 5pk
04151 1-1/2" Stiff Value Series™ Scraper*Labeled, 0.7lb, 5pk
04352 3" Flexible Value Series™ Scraper*Labeled, 0.7lb, 5pk
04401 3" Stiff Value Series™ Scraper*Labeled, 0.9lb, 5pk
04701 4-1/2" Flexible Value Series™ Joint Knife*Labeled, 0.9lb, 5pk
04851 6" Flexible Value Series™ Joint Knife*Labeled, 1.0lb, 5pk
Brass Putty Knives & Scrapers
Black & Silver®
Heavy duty Black & Silver® brass tools have stiff, non-spark blades for scraping delicate surfaces or working in volatile environments. .055" thick, full-tang blade. Guaranteed forever.
02080 1-1/4" Stiff Black & Silver® Brass Putty Knife*Labeled, 1.9lb, 10pk
02215 1-5/16" Stiff Black & Silver® Brass Chisel Putty Knife
with chisel edge for getting under paint and coatings more easily.
*Labeled, 2.1lb, 10pk
02320 2" Stiff Black & Silver® Brass Putty Knife*Labeled, 2.0lb, 10pk
02420 3" Stiff Black & Silver® Brass Chisel Scraper
with chisel edge for getting under paint and coatings more easily.
*Labeled, 3.0lb, 10pk
Pro Project™
High-quality tools with stiff non-spark brass blades for scraping delicate surfaces or working in volatile environments. Overmold comfort grip and Hammer Head® end for resetting nails and screws. Blades hardened for durability.
06081 1-1/4" Stiff Pro Project™ Brass Scraper*Labeled, 0.7lb, 5pk
06321 2" Stiff Pro Project™ Brass Putty Knife*Labeled, 0.7lb, 5pk
06421 3" Stiff Pro Project™ Brass Scraper*Labeled, 0.8lb, 5pk
Economy SeriesSpreading Tools
05510 1-1/2" Economy Series Spreading Tool
1-1/2" lightweight polypropylene tool for spreading or scraping compounds. Easy cleanup, or toss when finished. reinforced handle outlasts other disposables.
*Labeled,1.5lb, 40pk
05520 2" Economy Series Spreading Tool
2" lightweight polypropylene tool for spreading or scraping com-pounds. Easy cleanup, or toss when finished. reinforced handle outlasts other disposables.
*Labeled,1.6lb, 40pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
1110
PUTTY KNIVES & SCRAPERSHardwood HandlesPro-quality tools with solvent- resistant hardwood handles. High- carbon steel blades are individually ground, polished and clear coated.
Flexible Bladesfor applying compounds, smoothing and scraping.
07010 1-1/4" Flexible Putty Knife, Hardwood Handle*Labeled, 0.8lb, 5pk
07060 1-1/4" Stiff Putty Knife, Hardwood Handle*Labeled, 0.9lb, 5pk
07210 1-1/4" Extra Heavy Duty Stiff Chisel Putty Knife, Hardwood Handle*Labeled, 1.0lb, 5pk
07110 1-1/2" Flexible Putty Knife, Hardwood Handle*Labeled, 0.9lb, 5pk
07160 1-1/2" Stiff Putty Knife, Hardwood Handle*Labeled, 1.0lb, 5pk
07360 3" Flexible Joint Knife, Hardwood Handle*Labeled, 1.1lb, 5pk
07410 3" Stiff Chisel Scraper, Hardwood Handle*Labeled, 1.6lb, 5pk
07745 4" Flexible Joint Knife, Hardwood Handle*Labeled, 1.3lb, 5pk
07760 5" Flexible Joint Knife, Hardwood Handle *Labeled, 1.4lb, 5pk
07860 6" Flexible Joint Knife, Hardwood Handle*Labeled, 1.5lb, 5pk
Carbon Steel Putty Knives & Scrapers
Pro Project™
High-quality tools with an overmold comfort grip and Hammer Head® end for resetting popped nails and screws. Ground and polished carbon steel blades are hardened for durability.
06101 1-1/2" Flexible Pro Project™ Putty Knife*Labeled, 0.7lb, 5pk
06151 1-1/2" Stiff Pro Project™ Scraper*Labeled, 0.7lb, 5pk
06222 2" Flexible Pro Project™ Putty Knife*Labeled, 0.7lb, 5pk
06221 2" Stiff Pro Project™ Scraper*Labeled, 0.7lb, 5pk
06351 3" Flexible Pro Project™ Joint Knife*Labeled, 0.8lb, 5pk
06401 3" Stiff Pro Project™ Chisel Scraper*Labeled, 0.8lb, 5pk
06571 4" Flexible Pro Project™ Joint Knife*Labeled, 0.9lb, 5pk
06771 5" Flexible Pro Project™ Joint Knife*Labeled, 1.0lb, 5pk
06872 6" Flexible Pro Project™ Joint Knife*Labeled, 1.1lb, 5pk
Value Series™ Economical tools with ergonomic handle shaped for comfort. Stamped Carbon steel blades.
04060 1-1/8" Flexible Value Series™ Putty Knife*Labeled, 0.8lb, 5pk
04101 1-1/2" Flexible Value Series™ Putty Knife*Labeled, 0.7lb, 5pk
04151 1-1/2" Stiff Value Series™ Scraper*Labeled, 0.7lb, 5pk
04352 3" Flexible Value Series™ Scraper*Labeled, 0.7lb, 5pk
04401 3" Stiff Value Series™ Scraper*Labeled, 0.9lb, 5pk
04701 4-1/2" Flexible Value Series™ Joint Knife*Labeled, 0.9lb, 5pk
04851 6" Flexible Value Series™ Joint Knife*Labeled, 1.0lb, 5pk
Brass Putty Knives & Scrapers
Black & Silver®
Heavy duty Black & Silver® brass tools have stiff, non-spark blades for scraping delicate surfaces or working in volatile environments. .055" thick, full-tang blade. Guaranteed forever.
02080 1-1/4" Stiff Black & Silver® Brass Putty Knife*Labeled, 1.9lb, 10pk
02215 1-5/16" Stiff Black & Silver® Brass Chisel Putty Knife
with chisel edge for getting under paint and coatings more easily.
*Labeled, 2.1lb, 10pk
02320 2" Stiff Black & Silver® Brass Putty Knife*Labeled, 2.0lb, 10pk
02420 3" Stiff Black & Silver® Brass Chisel Scraper
with chisel edge for getting under paint and coatings more easily.
*Labeled, 3.0lb, 10pk
Pro Project™
High-quality tools with stiff non-spark brass blades for scraping delicate surfaces or working in volatile environments. Overmold comfort grip and Hammer Head® end for resetting nails and screws. Blades hardened for durability.
06081 1-1/4" Stiff Pro Project™ Brass Scraper*Labeled, 0.7lb, 5pk
06321 2" Stiff Pro Project™ Brass Putty Knife*Labeled, 0.7lb, 5pk
06421 3" Stiff Pro Project™ Brass Scraper*Labeled, 0.8lb, 5pk
Economy SeriesSpreading Tools
05510 1-1/2" Economy Series Spreading Tool
1-1/2" lightweight polypropylene tool for spreading or scraping compounds. Easy cleanup, or toss when finished. reinforced handle outlasts other disposables.
*Labeled,1.5lb, 40pk
05520 2" Economy Series Spreading Tool
2" lightweight polypropylene tool for spreading or scraping com-pounds. Easy cleanup, or toss when finished. reinforced handle outlasts other disposables.
*Labeled,1.6lb, 40pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
12
PUTTY KNIVES & SCRAPERS
05530 3" Economy Series Spreading Tool
3" lightweight polypropylene tool for spreading or scraping compounds. Easy cleanup, or toss when finished. Reinforced handle outlasts other disposables.
*Labeled, 1.1lb, 20pk
05610 Economy Series Combo Pack 1-1/2", 3", 6"
Lightweight polypropylene tools for spreading or scraping compounds. Easy cleanup, or toss when finished. Reinforced handles outlast other disposables. Pack includes one each of 1-1/2", 3" and 6" tools.
*Labeled, 2.1lb, 10pk
05615 Economy Series Combo Pack 2", 4", 6"
Lightweight polypropylene tools for spreading or scraping compounds. Easy cleanup, or toss when finished. Reinforced handles outlast other disposables. Pack includes one each of 2", 4" and 6" tools.
*Labeled, 3.4lb, 20pk
MAXXGRIP PRO®
Carbide Pull ScrapersHeavy-duty carbide blades easily remove paint and other coatings, and will outlast carbon steel 10 to 1. Ergonomically engineered soft-grip handle provides extra leverage and less hand fatigue. Angled head for maximum scraping efficiency. Guaranteed forever.
10600 7/8" MAXXGRIP PRO® Carbide Scraper, 3-Edge Blade
Super-small-profile triangular blade is perfect for scraping stair railings, small channels and other hard-to-reach areas. Replaceable 3-edge 7/8" triangular carbide .
*Carded, 2.0lb, 3pk
10610 2" MAXXGRIP PRO® Heavy Duty Carbide Scraper, 2-Edge Blade
Top-of-the-line, full-size pull scraper aggressively removes paint and other coatings. Replaceable 2" 2-edge carbide blade.
*Carded, 2.4lb, 5pk
10620 2-1/2" MAXXGRIP PRO® Heavy Duty Carbide Scraper, 2-Edge Blade
This super-aggressive pull scraper adds a knob for two-handed scraping with a Hammer Head® inset for resetting popped nails and screws as you work. Replaceable 2-1/2" 2-edge carbide blade.
*Carded, 3.0lb, 3pk
Carbide Scraper Blades
11160 7/8" Carbide Scraper Blade, 3-Edge
7/8" triangular tungsten carbide blade for HYDE® scraper #10600. 3 sharp scraping edges.
*Carded, 0.3lb, 3pk
11170 2" Carbide Scraper Blade, 2-Edge
2" tungsten carbide blade for HYDE® scraper #10610. 2 sharp scraping edges.
*Carded, 0.2lb, 5pk
11171 2" Carbide Scraper Blade, 2-Edge, 25 pack
2" tungsten carbide blades for HYDE® scraper #10610. 2 sharp scraping edges.
*Carded, 0.2lb, 5pk
11172 2" Carbide Scraper Blade, 2-Edge, 5 pack
2" tungsten carbide blade for HYDE® scraper #10610. 2 sharp scraping edges.
*Carded, 0.2lb, 5pk
11180 2-1/2" Carbide Scraper Blade, 2-Edge
2-1/2" tungsten carbide blade for HYDE® scraper #10620. 2 sharp scraping edges.
*Carded, 0.2lb, 3pk
Black & Silver®
Lifetime Pull ScrapersLifetime scrapers have heavy-duty high-carbon steel blades set in a well-balanced angled handle which provides good leverage and keeps knuckles away from work surface. Blades can be sharpened or re-placed. Guaranteed forever.
10500 1" Lifetime Scraper, 2-Edge Blade
Small profile pull scraper ideal for small jobs, narrow channels and hard-to-reach areas. 1" blade with 2 scraping edges. Scraper measures 7-1/2".
*Carded, 1.1lb, 5pk
10510 1-1/2" Lifetime Scraper, 2-Edge Blade
Small profile pull scraper ideal for small jobs, narrow channels and hard-to-reach areas. 1-1/2" blade with 2 scraping edges. Scraper measures 7-1/2".
*Carded, 1.5lb, 5pk
10520 2-1/2" Lifetime Scraper, 2-Edge Blade
Full-size pull scraper for scrap- ing chipped and peeling paint or coatings. 2-1/2" blade with 2 scraping edges. Scraper measures 9".
*Carded, 2.0lb, 5pk
Do it the HYDE® way at hydetools.com
13
10530 1-1/2" Lifetime Scraper, 4-Edge Blade
Small profile pull scraper with 4 scraping edges, ideal for prolonged scraping of narrow channels and hard-to-reach areas. Heavy-duty high-carbon steel blade has 2 rough and 2 smooth edges. 1-1/2" blade can be resharpened or replaced. Scraper measures 7 1/2".
*Carded, 1.5lb, 5pk
10540 2-1/2" Lifetime Scraper, 4-Edge Blade
Large-job pull scraper with 4 scraping edges is ideal for all-day scraping. Heavy-duty high-carbon steel blade has 2 rough and 2 smooth edges. Hammer Head® knob allows for two-handed scraping and resetting nails and screws as you work. 2-1/2" blade can be resharpened or replaced. Scraper measures 12-1/2".
*Carded, 4.0lb, 5pk
10550 5" Lifetime Scraper, 2-Edge Blade
Extra-wide scraper with 5" blade. Knob for two-handed scraping also has metal Hammer Head® in-set for resetting nails and screws as you work. Excellent for large exterior scraping and commercial jobs. Heavy-duty high-carbon steel scraper has 2 scraping edges that can be resharpened or replaced. Scraper measures 13-1/2".
*Carded, 5.4lb, 5pk
Lifetime Scraper Replacement Blades
11000 1" Lifetime Scraper Blade, 2-Edge
Replacement blade for HYDE® Lifetime scraper #10500. 2 sharp scraping edges.
*Carded, 0.3lb, 10pk
11050 1-1/2" Lifetime Scraper Blade, 2-Edge
Replacement blade for HYDE® Lifetime scraper #10510. 2 sharp scraping edges.
*Carded, 0.5lb, 10pk
11100 2-1/2" Lifetime Scraper Blade, 2-Edge
Replacement blade for HYDE® Lifetime scraper #10520. 2 sharp scraping edges.
*Carded, 0.5lb, 10pk
11120 1-1/2" Lifetime Scraper Blade, 4-Edge
Replacement blade for HYDE® Lifetime scraper #10530. 4 sharp scraping edges, 2 rough, 2 smooth. 1 blade.
*Carded, 0.6lb, 10pk
11125 1-1/2" Lifetime Scraper Blade, 4-Edge, 2 Pack
Replacement blade for HYDE® Lifetime scrapers #10530. 4 sharp scraping edges, 2 rough, 2 smooth. 2 blades.
*Carded, 0.5lb, 5pk
11130 2-1/2" Lifetime Scraper Blade, 4-Edge
Replacement blade for HYDE® Lifetime scrapers #10280, #10540. 4 sharp scraping edges, 2 rough, 2 smooth. 1 blade.
*Carded, 1.0lb, 10pk
11135 2-1/2" Lifetime Scraper Blade, 4-Edge, 2 Pack
Replacement blade for HYDE® Lifetime scrapers #10280, #10540. 4 sharp scraping edges, 2 rough, 2 smooth. 2 blades.
*Carded, 1.0lb, 5pk
11150 5" Lifetime Scraper Blade, 2-Edge, 2 Pack
Replacement blade for HYDE® Lifetime scraper #10550, 2 sharp scraping edges. 2 blades.
*Carded, 1.0lb, 5pk
*Retailer Pack Information
Scrapes Tall Buildings in a Single PassHYDE® carbide scrapers remove paint and coatings faster and easier than any other type of scraper — with a blade that outlasts carbon steel 10 to 1.
Knob for controlled, 2-handed scraping
Comfort gripfor hours of scraping
Carbide blade2 sharp edges
Hammer Head® insertfor resetting nails
Do it the hard way, or the HYDE® way.
Part #10620
14
PUTTY KNIVES & SCRAPERSContour Scraper/ Molding Scraper
10450 Quick-Release Contour Scraper
Scrape molding, stair spindles, chair rails, doors and window casings. 6 stainless steel blades with12 scraping edges. Quick- release lever for easy blade change without tools. Convenient storage case.
*Carded, 3.3lb, 5pk
10400 Molding Scraper, 2 Blades
Scrape flat surfaces, cracks and various molding contours. 9-3/4" tubular metal handle for use with heat guns, plus 2 high carbon steel blades: Triangle with three 2-3/4" scraping edges and 2"x1" teardrop blade. rugged steel blade holder with foam handgrip.
*Carded, 2.5lb, 5pk
10410 Teardrop Molding Scraper Blade
replacement blade for HYDE® #10400 molding scraper. 2"x1" teardrop blade.
*Carded, 0.5lb, 10pk
10420 Triangular Molding Scraper Blade
replacement blade for HYDE® #10400 molding scraper. 2-3/4" triangular blade with 3 scraping edges.
*Carded, 0.8lb, 10pk
Blade Sharpening File
11200 Sharpening File
Designed to sharpen carbon steel scraper blades. Double cut for general purpose.
*Carded, 2.8lb, 10pk
Heavy Duty Push Scrapers
HYDE® push scrapers are ideal for use with paint removers or “burn-off” applications. Long handles for two-handed use. For more heavy-duty push scrapers, see our Flooring Section.
12000 3" Stiff Heavy Duty Bent Blade Chisel Scraper
Extra-heavy-duty high-carbon steel scraper with 5-1/2" polypro-pylene handle, electrocoated for use with paint removers. Blade with 20° angle for easy paint removal. Measures 9" overall.
*Labeled, 1.8lb, 5pk
12010 3" Heavy Duty Bent Blade Chisel Scraper Hardwood Handle
Extra-heavy-duty high-carbon steel scraper. Blade bent 20° for easy paint removal. Hardwood handle is milled, contoured and sanded smooth. High-carbon steel blade individually ground, polished, mirror finished and clear coated. Blade and handle permanently joined with brass rivets. Brass-plated hang hole.
*Labeled, 2.0lb, 5pk
12050 3" Stiff Heavy Duty Long Handle Chisel Scraper
Extra-heavy-duty high-carbon steel scraper with 8" polypropyl-ene handle, electrocoated for use with paint removers.
*Labeled, 2.0lb, 5pk
12060 3" Stiff Long Handle Bent Blade Chisel Scraper
Extra-heavy-duty high-carbon steel scraper with 8" polypropyl-ene handle, electrocoated for use with paint removers. Blade has 20° angle for easy paint removal.
*Labeled, 2.0lb, 5pk
12070 3" Stiff Bent Blade Chisel Extension Pole Scraper
Extra-heavy-duty high-carbon steel scraper electrocoated for use with paint removers. Use hand-held or with an acme threaded broom handle or extension pole. One-piece polypropylene handle resists corrosion. Thumb bolster for increased leverage. Blade bent 20° for easier paint removal.
*Labeled, 2.1lb, 5pk
12072 3" Stiff Extra Heavy Duty Chisel Extension Pole Scraper
Extra-heavy-duty high-carbon steel scraper electrocoated for use with paint removers. Use hand-held or with an acme threaded broom handle or extension pole. One-piece polypropylene handle resists corrosion. Thumb bolster for increased leverage.
*Labeled, 2.1lb, 5pk
12040 1-5/16" Long Handle Brass Chisel Scraper
Brass non-spark blade with chisel edge for scraping delicate surfaces or working in volatile en-vironments. Polypropylene handle with large hang hole for storage. Measures 11-1/4" overall.
*Labeled, 1.8lb, 5pk
12055 3" Long Handle Brass Chisel Scraper
Brass non-spark blade for scrap-ing delicate surfaces or working in volatile environments. Polypropyl-ene handle with large hang hole for storage. Measures 11-1/4" overall.
*Labeled, 2.2lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Informationhydetools.com • 800-872-4933
As seen in:
BobVila.com
RonHazelton.com
MyFixItUpLife.com
Handy Magazine
Handyman
Extreme How-to
American Painting ContractorThe Paint ContractorDurability + DesignPainting Pro TimesRemodelingToday’s HomeownerYouTube/HydeTools
Tens of Millions of Brand Impressions Annually
*Retailer Pack Information
14
PUTTY KNIVES & SCRAPERSContour Scraper/ Molding Scraper
10450 Quick-Release Contour Scraper
Scrape molding, stair spindles, chair rails, doors and window casings. 6 stainless steel blades with12 scraping edges. Quick- release lever for easy blade change without tools. Convenient storage case.
*Carded, 3.3lb, 5pk
10400 Molding Scraper, 2 Blades
Scrape flat surfaces, cracks and various molding contours. 9-3/4" tubular metal handle for use with heat guns, plus 2 high carbon steel blades: Triangle with three 2-3/4" scraping edges and 2"x1" teardrop blade. rugged steel blade holder with foam handgrip.
*Carded, 2.5lb, 5pk
10410 Teardrop Molding Scraper Blade
replacement blade for HYDE® #10400 molding scraper. 2"x1" teardrop blade.
*Carded, 0.5lb, 10pk
10420 Triangular Molding Scraper Blade
replacement blade for HYDE® #10400 molding scraper. 2-3/4" triangular blade with 3 scraping edges.
*Carded, 0.8lb, 10pk
Blade Sharpening File
11200 Sharpening File
Designed to sharpen carbon steel scraper blades. Double cut for general purpose.
*Carded, 2.8lb, 10pk
Heavy Duty Push Scrapers
HYDE® push scrapers are ideal for use with paint removers or “burn-off” applications. Long handles for two-handed use. For more heavy-duty push scrapers, see our Flooring Section.
12000 3" Stiff Heavy Duty Bent Blade Chisel Scraper
Extra-heavy-duty high-carbon steel scraper with 5-1/2" polypro-pylene handle, electrocoated for use with paint removers. Blade with 20° angle for easy paint removal. Measures 9" overall.
*Labeled, 1.8lb, 5pk
12010 3" Heavy Duty Bent Blade Chisel Scraper Hardwood Handle
Extra-heavy-duty high-carbon steel scraper. Blade bent 20° for easy paint removal. Hardwood handle is milled, contoured and sanded smooth. High-carbon steel blade individually ground, polished, mirror finished and clear coated. Blade and handle permanently joined with brass rivets. Brass-plated hang hole.
*Labeled, 2.0lb, 5pk
12050 3" Stiff Heavy Duty Long Handle Chisel Scraper
Extra-heavy-duty high-carbon steel scraper with 8" polypropyl-ene handle, electrocoated for use with paint removers.
*Labeled, 2.0lb, 5pk
12060 3" Stiff Long Handle Bent Blade Chisel Scraper
Extra-heavy-duty high-carbon steel scraper with 8" polypropyl-ene handle, electrocoated for use with paint removers. Blade has 20° angle for easy paint removal.
*Labeled, 2.0lb, 5pk
12070 3" Stiff Bent Blade Chisel Extension Pole Scraper
Extra-heavy-duty high-carbon steel scraper electrocoated for use with paint removers. Use hand-held or with an acme threaded broom handle or extension pole. One-piece polypropylene handle resists corrosion. Thumb bolster for increased leverage. Blade bent 20° for easier paint removal.
*Labeled, 2.1lb, 5pk
12072 3" Stiff Extra Heavy Duty Chisel Extension Pole Scraper
Extra-heavy-duty high-carbon steel scraper electrocoated for use with paint removers. Use hand-held or with an acme threaded broom handle or extension pole. One-piece polypropylene handle resists corrosion. Thumb bolster for increased leverage.
*Labeled, 2.1lb, 5pk
12040 1-5/16" Long Handle Brass Chisel Scraper
Brass non-spark blade with chisel edge for scraping delicate surfaces or working in volatile en-vironments. Polypropylene handle with large hang hole for storage. Measures 11-1/4" overall.
*Labeled, 1.8lb, 5pk
12055 3" Long Handle Brass Chisel Scraper
Brass non-spark blade for scrap-ing delicate surfaces or working in volatile environments. Polypropyl-ene handle with large hang hole for storage. Measures 11-1/4" overall.
*Labeled, 2.2lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Informationhydetools.com • 800-872-4933
As seen in:
BobVila.com
RonHazelton.com
MyFixItUpLife.com
Handy Magazine
Handyman
Extreme How-to
American Painting ContractorThe Paint ContractorDurability + DesignPainting Pro TimesRemodelingToday’s HomeownerYouTube/HydeTools
Tens of Millions of Brand Impressions Annually
*Retailer Pack Information
17
SANDING TOOLSDust-Free Vacuum Sanding
09165 Dust-Free Vacuum Hand Sander Kit
attachment for hand sanding.
*Boxed, 1.9lb, 1pk
09170 Dust-Free Vacuum Pole Sander Kit (without pole)
attachment for pole sanding. Pole not included.
*Boxed, 2.2lb, 1pk
09175 Dust-Free Vacuum Pole Sander Kit (with pole)
includes a high-quality, acme- threaded pole plus an adapter that transforms the pole for other standard uses.
*Clam shell, 5.6lb, 1pk
09160 Dust-free Sponge Sander
attaches to a wet-dry vac and uses a sanding sponge that works on any type of surface. Comes with 2 medium grit sponges including 1 to use in corners without damaging the abutting surface. Patent pending.
*Boxed, 1.0lb, 4pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
Dust-free Drywall Sandersinstead of sandpaper, these sanders use an abrasive drywall sandscreen that allows drywall dust to be pulled into your vacuum instead of foul- ing the air and landing on the floor. The sandscreens, which are washable and reusable, last much longer than sandpaper — and when you do have to replace them, our patented EasyClamp™ system makes that easy, too. Models include a hand sander and full pole sander. Pole sander also comes without the pole and can be used with any acme thread extension pole. Sandscreens are available in fine, medium and coarse grits.
New! Dust-Free Sponge Sander for Any SurfaceThis sander was designed for use with any type of surface, including drywall, stucco, wood and metal. it uses a standard sanding sponge, which makes replacement fast and easy. a channel around the sponge allows the vacuum to remove 95% of the dust, eliminating difficult cleanup. replaceable sanding sponges are wash-able and reusable, and last 3 times longer than sandpa-per. Can be used with any 3" x 5" sanding sponge.
Before there were HYDE® Dust-free Sanders, every sand-ing job turned into two jobs — sanding your project, then cleaning invasive dust off of every surface.
all that changes when you attach a HYDE® Dust-free Sander to your wet-dry vacuum. These sanders elimi-nate 95% of the dust, so you get professional sanding results without the cleanup, and without risking your health by choking down all that dust.
Choose the Style to Match Your Job
Did someone say dust-free?
Do it the HYDE® way.
Part #09160
17
SANDING TOOLSDust-Free Vacuum Sanding
09165 Dust-Free Vacuum Hand Sander Kit
Attachment for hand sanding.
*Boxed, 1.9lb, 1pk
09170 Dust-Free Vacuum Pole Sander Kit (without pole)
Attachment for pole sanding. Pole not included.
*Boxed, 2.2lb, 1pk
09175 Dust-Free Vacuum Pole Sander Kit (with pole)
Includes a high-quality, Acme- threaded pole plus an adapter that transforms the pole for other standard uses.
*Clam shell, 5.6lb, 1pk
09160 Dust-free Sponge Sander
Attaches to a wet-dry vac and uses a sanding sponge that works on any type of surface. Comes with 2 medium grit sponges including 1 to use in corners without damaging the abutting surface. Patent pending.
*Boxed, 1.0lb, 4pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
Dust-free Drywall SandersInstead of sandpaper, these sanders use an abrasive drywall sandscreen that allows drywall dust to be pulled into your vacuum instead of foul- ing the air and landing on the floor. The sandscreens, which are washable and reusable, last much longer than sandpaper — and when you do have to replace them, our patented EasyClamp™ system makes that easy, too. Models include a hand sander and full pole sander. Pole sander also comes without the pole and can be used with any Acme thread extension pole. Sandscreens are available in fine, medium and coarse grits.
New! Dust-Free Sponge Sander for Any SurfaceThis sander was designed for use with any type of surface, including drywall, stucco, wood and metal. It uses a standard sanding sponge, which makes replacement fast and easy. A channel around the sponge allows the vacuum to remove 95% of the dust, eliminating difficult cleanup. Replaceable sanding sponges are wash-able and reusable, and last 3 times longer than sandpa-per. Can be used with any 3" x 5" sanding sponge.
Choose the Style to Match Your Job
Part #09160
1918
Pole Sanders
ClawGrip® Sponge SanderThis patented new aluminum sand-ing head has two “claws” that grab hold of the included sanding sponge to create a no-flip, low-profile sanding tool that’s easy to load and use. The U-joint design provides a smooth sanding action using high-quality sanding sponges that last 3 times longer than sandpaper. replacing the sponge takes under 5 seconds. Sponges can be rinsed and are reusable and replaceable.
09049 ClawGrip® Pole Sander with Flat Sanding Sponge
Comes with a 2-sided, medium grit sponge (item#09083). Quick, easy changeout for sponge replacement. Can be used with sponges #09051, #09052, #09054 and #09083.
*Carded, 3.7lb, 5pk
09082 ClawGrip® Pole Sander with Triangular Sponge
Comes with a 3-sided, fine-grit triangular sanding sponge (item #09056) for sanding both sides of a drywall corner simultaneously.
*Carded, 3.7lb, 5pk
Full-size Sanding SpongesThese high-quality, oversized sand-ing sponges are long-lasting and washable. They can be used as is or attached to a ClawGrip® Sponge Sander. availiable in fine and medi-um grit in rectangular or triangular shapes with sanding surfaces on 2, 3 or 4 sides. rectangular sponges measure 8-7/8" x 4" x 3/4".
09051 220 Grit Sanding Sponge, 4-sided
rectangular 220/fine grit sponge has grit on 4 sides for sanding flat and abutting surfaces.
*Carded, 0.9lb, 6pk
09054 220 Grit Sanding Sponge, 2-sided
rectangular 220/fine grit sponge has grit on 2 sides for sanding flat surfaces.
*Carded, 0.9lb, 6pk
09052 150 Grit Sanding Sponge, 4-sided
rectangular 150/medium grit sponge has grit on 4 sides for sanding flat and abutting surfaces.
*Carded, 0.9lb, 6pk
09083 150 Grit Sanding Sponge, 2-sided
rectangular 150/medium grit sponge has grit on 2 sides for sanding flat surfaces.
*Carded, 0.9lb, 6pk
09056 220 Grit Triangular Sanding Sponge
Triangular, 220/fine grit sponge has sanding surfaces on all three sides for sanding both sides of an inside corner simultaneously. Measures 8-7/8" x 2-1/2".
*Carded, 1.0lb, 6pk
Quick Change Pole Sanders
09047 Aluminum Pole Sander Head
High-quality lightweight aluminum pole sanding head. Unique Easy-Clamp system allows for quick sheet changes. Uses 3-1/4"x 9-3/8" abrasive sheets. acme threaded female end fits standard broom handles and extension poles.
*Carded, 3.4lb, 5pk
09048 Aluminum Pole Sander with 48" Pole
High-quality lightweight aluminum pole sanding head. Unique Easy-Clamp system allows for quick sheet changes. Uses 3-1/4"x 9-3/8" abrasive sheets. acme threaded female end fits standard broom handles and extension poles.
*Carded, 8.6lb, 5pk
SANDING TOOLS
09046 Economy Series Pole Sander Head
For sanding ceilings and walls from floor level. 3-1/4"x9" poly-propylene head with foam pad. Wing nut clamps hold abrasive sheets firmly. acme threaded female end fits standard broom handles and extension poles.
*Carded, 3.0lb, 5pk
Drywall Sanding ScreensDesigned specifically for use with drywall compound, these unique sanding screens have a smaller mesh that prevents scratching walls. 45° mesh angle offsets typical angle of sanding head in use. Precut to 3-1/4" x 11-1/4". Shake or rinse to clean. Last 5 times longer than sandpaper. For use with any HYDE® pole, hand or vacuum sander.
09902 180 Grit (Medium) Drywall Sanding Screen, 2 Pack*Carded, 1.1lb, 10pk
09905 120 Grit (Coarse) Drywall Sanding Screen, 25 Pack*Bagged, 0.7lb, 1pk
09906 120 Grit (Coarse) Drywall Sanding Screen, 2 Pack*Carded, 1.1lb, 10pk
09909 220 Grit (Fine) Drywall Sanding Screen, 25 Pack*Bagged, 0.7lb, 1pk
09916 220 Grit (Fine) Drywall Sanding Screen, 2 Pack*Carded, 1.1lb, 10pk
Hand Sanders
09057 Soft Grip Quick-Change Drywall Hand Sander
Comfortable overmold handle with EasyClamp system for quickly changing abrasive sheets. 3-1/4"x 9" aluminum-backed rubber sanding pad. rubberized handle allows for more powerful sanding.
*Carded, 4.0lb, 5pk
09157 Economy Series Drywall Hand Sander
Super-lightweight hand sander for sanding drywall joints. 3-1/4"x9-3/8" foam sanding pad. Wing nut clamps hold abrasive sheets firmly.
*Carded, 1.8lb, 5pk
45395 Heavy Duty Rubber Sanding Block
all-purpose, wet or dry sanding block. Flexible rubber construc-tion holds paper securely. For sanding all materials. To sand flat surfaces, wrap paper around bottom of block. Wrap sandpaper around top for curved surfaces. Fits 1/4 sheet of sandpaper.
*Carded, 7.3lb, 10pk
Sanding Sponges
45390 Drywall Sanding Sponge
Three-layer sponge includes abrasive side for sanding drywall; super-absorbent side for cleaning and wiping surfaces; and center layer to act as a spine and to shield abrasive surfaces from oversaturation. Measures 9"x4-1/2"x1-7/8".
*Bagged, 2.0lb, 12pk
45310 Foam Sanding Block (Fine/Medium)
For flat or contour sanding. Use wet or dry. rinse to clean. Block measures 2-3/4"x4"x1". 2 sanding sides of fine and medium grit.
*Carded, 1.0lb, 10pk
45320 Foam Sanding Block (Medium/Coarse)
For flat or contour sanding. Use wet or dry. rinse to clean. Block measures 2-3/4"x4"x1". 2 sanding sides of medium and coarse grit.
*Carded, 1.0lb, 10pk
45350 Foam Sanding Block (Fine/Medium)
Heavy-duty aluminum oxide abrasive for flat or contour sanding. Use wet or dry. rinse to clean. Block measures 3"x5"x1". 4 sanding sides of fine and medium grit.
*Carded, 1.5lb, 10pk
45360 Foam Sanding Block (Medium/Coarse)
Heavy-duty aluminum oxide abrasive for flat or contour sanding. Use wet or dry. rinse to clean. Block measures 3"x5"x1". 4 sanding sides of medium and coarse grit.
*Carded, 1.5lb, 10pk
45375 Angled Foam Sander (Medium/Coarse)
Double-grit flexible foam sander for flat or contour sanding. Dual angle reaches into tight corners.
*Carded, 1.8lb, 12pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
GRIP AND GO
No more struggling with sandpaper! Just set the Clawgrip® on top of a sanding sponge, press, and you’re ready to sand. Patented design works with flat and triangular/corner sponges.
1918
Pole Sanders
ClawGrip® Sponge SanderThis patented new aluminum sand-ing head has two “claws” that grab hold of the included sanding sponge to create a no-flip, low-profile sanding tool that’s easy to load and use. The U-joint design provides a smooth sanding action using high-quality sanding sponges that last 3 times longer than sandpaper. replacing the sponge takes under 5 seconds. Sponges can be rinsed and are reusable and replaceable.
09049 ClawGrip® Pole Sander with Flat Sanding Sponge
Comes with a 2-sided, medium grit sponge (item#09083). Quick, easy changeout for sponge replacement. Can be used with sponges #09051, #09052, #09054 and #09083.
*Carded, 3.7lb, 5pk
09082 ClawGrip® Pole Sander with Triangular Sponge
Comes with a 3-sided, fine-grit triangular sanding sponge (item #09056) for sanding both sides of a drywall corner simultaneously.
*Carded, 3.7lb, 5pk
Full-size Sanding SpongesThese high-quality, oversized sand-ing sponges are long-lasting and washable. They can be used as is or attached to a ClawGrip® Sponge Sander. availiable in fine and medi-um grit in rectangular or triangular shapes with sanding surfaces on 2, 3 or 4 sides. rectangular sponges measure 8-7/8" x 4" x 3/4".
09051 220 Grit Sanding Sponge, 4-sided
rectangular 220/fine grit sponge has grit on 4 sides for sanding flat and abutting surfaces.
*Carded, 0.9lb, 6pk
09054 220 Grit Sanding Sponge, 2-sided
rectangular 220/fine grit sponge has grit on 2 sides for sanding flat surfaces.
*Carded, 0.9lb, 6pk
09052 150 Grit Sanding Sponge, 4-sided
rectangular 150/medium grit sponge has grit on 4 sides for sanding flat and abutting surfaces.
*Carded, 0.9lb, 6pk
09083 150 Grit Sanding Sponge, 2-sided
rectangular 150/medium grit sponge has grit on 2 sides for sanding flat surfaces.
*Carded, 0.9lb, 6pk
09056 220 Grit Triangular Sanding Sponge
Triangular, 220/fine grit sponge has sanding surfaces on all three sides for sanding both sides of an inside corner simultaneously. Measures 8-7/8" x 2-1/2".
*Carded, 1.0lb, 6pk
Quick Change Pole Sanders
09047 Aluminum Pole Sander Head
High-quality lightweight aluminum pole sanding head. Unique Easy-Clamp system allows for quick sheet changes. Uses 3-1/4"x 9-3/8" abrasive sheets. acme threaded female end fits standard broom handles and extension poles.
*Carded, 3.4lb, 5pk
09048 Aluminum Pole Sander with 48" Pole
High-quality lightweight aluminum pole sanding head. Unique Easy-Clamp system allows for quick sheet changes. Uses 3-1/4"x 9-3/8" abrasive sheets. acme threaded female end fits standard broom handles and extension poles.
*Carded, 8.6lb, 5pk
SANDING TOOLS
09046 Economy Series Pole Sander Head
For sanding ceilings and walls from floor level. 3-1/4"x9" poly-propylene head with foam pad. Wing nut clamps hold abrasive sheets firmly. acme threaded female end fits standard broom handles and extension poles.
*Carded, 3.0lb, 5pk
Drywall Sanding ScreensDesigned specifically for use with drywall compound, these unique sanding screens have a smaller mesh that prevents scratching walls. 45° mesh angle offsets typical angle of sanding head in use. Precut to 3-1/4" x 11-1/4". Shake or rinse to clean. Last 5 times longer than sandpaper. For use with any HYDE® pole, hand or vacuum sander.
09902 180 Grit (Medium) Drywall Sanding Screen, 2 Pack*Carded, 1.1lb, 10pk
09905 120 Grit (Coarse) Drywall Sanding Screen, 25 Pack*Bagged, 0.7lb, 1pk
09906 120 Grit (Coarse) Drywall Sanding Screen, 2 Pack*Carded, 1.1lb, 10pk
09909 220 Grit (Fine) Drywall Sanding Screen, 25 Pack*Bagged, 0.7lb, 1pk
09916 220 Grit (Fine) Drywall Sanding Screen, 2 Pack*Carded, 1.1lb, 10pk
Hand Sanders
09057 Soft Grip Quick-Change Drywall Hand Sander
Comfortable overmold handle with EasyClamp system for quickly changing abrasive sheets. 3-1/4"x 9" aluminum-backed rubber sanding pad. rubberized handle allows for more powerful sanding.
*Carded, 4.0lb, 5pk
09157 Economy Series Drywall Hand Sander
Super-lightweight hand sander for sanding drywall joints. 3-1/4"x9-3/8" foam sanding pad. Wing nut clamps hold abrasive sheets firmly.
*Carded, 1.8lb, 5pk
45395 Heavy Duty Rubber Sanding Block
all-purpose, wet or dry sanding block. Flexible rubber construc-tion holds paper securely. For sanding all materials. To sand flat surfaces, wrap paper around bottom of block. Wrap sandpaper around top for curved surfaces. Fits 1/4 sheet of sandpaper.
*Carded, 7.3lb, 10pk
Sanding Sponges
45390 Drywall Sanding Sponge
Three-layer sponge includes abrasive side for sanding drywall; super-absorbent side for cleaning and wiping surfaces; and center layer to act as a spine and to shield abrasive surfaces from oversaturation. Measures 9"x4-1/2"x1-7/8".
*Bagged, 2.0lb, 12pk
45310 Foam Sanding Block (Fine/Medium)
For flat or contour sanding. Use wet or dry. rinse to clean. Block measures 2-3/4"x4"x1". 2 sanding sides of fine and medium grit.
*Carded, 1.0lb, 10pk
45320 Foam Sanding Block (Medium/Coarse)
For flat or contour sanding. Use wet or dry. rinse to clean. Block measures 2-3/4"x4"x1". 2 sanding sides of medium and coarse grit.
*Carded, 1.0lb, 10pk
45350 Foam Sanding Block (Fine/Medium)
Heavy-duty aluminum oxide abrasive for flat or contour sanding. Use wet or dry. rinse to clean. Block measures 3"x5"x1". 4 sanding sides of fine and medium grit.
*Carded, 1.5lb, 10pk
45360 Foam Sanding Block (Medium/Coarse)
Heavy-duty aluminum oxide abrasive for flat or contour sanding. Use wet or dry. rinse to clean. Block measures 3"x5"x1". 4 sanding sides of medium and coarse grit.
*Carded, 1.5lb, 10pk
45375 Angled Foam Sander (Medium/Coarse)
Double-grit flexible foam sander for flat or contour sanding. Dual angle reaches into tight corners.
*Carded, 1.8lb, 12pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
GRIP AND GO
No more struggling with sandpaper! Just set the Clawgrip® on top of a sanding sponge, press, and you’re ready to sand. Patented design works with flat and triangular/corner sponges.
2120
BRUSHESMAXXGRIP PRO® Wire Brushes
You simply won’t find better wire brushes than these. More 12-gauge (.40mm) wire bristles per square inch, highest quality materials and sturdy, soft-grip ergonomic handles.
46830 11-3/4" High-Carbon Steel Wire Brush
High-carbon steel wire brush has a large block design (6"x1") for large area prepping, with a tapered nose for tight access and corners where low profile or extra reach is needed. ideal for remov-ing flaking paint, rust, calcium, oxidation and corrosion.
*Carded, 2.5lb, 4pk
46831 11-3/4" Stainless Steel Wire Brush
High-quality, corrosion-resistant stainless steel brush has a large block design (6"x1") and long handle for large area prepping. Tapered nose for access to tight areas and corners where low- profile design or extra reach is needed. Perfect for tough, wet jobs.
*Carded, 2.5lb, 4pk
46832 8-3/4" High-Carbon Steel Wire Brush
High-carbon steel wire brush has a small block design (3"x3/4") and tapered nose for detailed prep-ping and tight access. ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion.
*Carded, 1.6lb, 4pk
46833 8-3/4" Stainless Steel Wire Brush
High-quality, corrosion-resistant stainless steel brush has a small block design (3"x3/4") and ta-pered nose for detailed prepping and tight access. The stainless steel bristles are perfect for tough, wet jobs.
*Carded, 1.6lb, 4pk
46834 11-3/4" High-Carbon Steel Wire Brush with Scraper
High-carbon steel wire brush with scraper has a large block design (6"x1") for large area prepping, with a tapered nose for tight access and corners where low profile or extra reach is needed. Hardened .075” thick scraper molded in place. ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion.
*Carded, 2.8lb, 4pk
46835 9-1/4" High-Carbon Steel Wire Brush with Scraper
High-carbon steel wire brush with scraper has a small block design (3-1/4"x1") and tapered nose for detailed prepping and tight access. Hardened .075” thick scraper molded in place. ideal for removing flaking paint, rust, calcium, oxidation and corrosion.
*Carded, 1.85lb, 4pk
46837 8" High-Carbon Steel Wire Brush
High-carbon steel wire brush with sturdy soft-grip handle for prepping medium to large flat surfaces where maximum down-ward force is needed. Large block design (8"x1-1/4") for large area prepping, with a tapered nose for tight access and corners. ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion.
*Carded, 3.0lb, 4pk
46838 8" Stainless Steel Wire Brush
Stainless steel wire brush with sturdy soft-grip handle for prep-ping medium to large flat surfaces where maximum downward force is needed. Large block design (8"x1-1/4") for large area prep-ping, with a tapered nose for tight access and corners. Stainless steel bristles are perfect for tough, wet jobs.
*Carded, 3.0lb, 4pk
46839 9" High-Carbon Steel Wire Brush
High-carbon steel wire brush with sturdy soft-grip handle for prepping large flat surfaces where maximum downward force is needed. Large block design (9"x2") for large area prepping, with a tapered nose for tight access and corners. ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion.
*Carded, 4.1lb, 4pk
46840 6-3/4" High-Carbon Steel Wire Brush
Block-style high-carbon steel brush can be used with or without a pole. Prep large flat surface ar-eas by hand or mount on pole (not included) for scrubbing floor or high areas. acme thread for use with a handle or extension pole.
*Carded, 4.8lb, 4pk
46841 11" High-Carbon Steel Wire Brush
High-carbon steel wire brush has a thin block design (5-1/2"x1") for prepping channels or narrow ar-eas, with tight access and corners where low profile or extra reach is needed. ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion.
*Carded, 2.2lb, 4pk
46842 11" Stainless Steel Wire Brush
High-quality, corrosion-resistant wire brush has a thin block design (5-1/2"x1") for prepping channels or narrow areas, with tight access and corners where low profile or extra reach is needed. Perfect for tough, wet jobs.
*Carded, 2.2lb, 4pk
46843 Mini Brush 3 Pack (Brass, Nylon, Stainless)
High-quality set of 3 mini-brushes includes brass, nylon and stain-less steel brushes for applications involving detail work or limited access.
*Bagged, 1.7lb, 6pk
Stripping & Scrub Brushes
a brush for every job! This full line of stripping brushes offers a wide range of designs in carbon steel, brass and stainless steel — all with overmold handles.
46800 Stiff Stainless Steel Stripping Brush
Small stainless steel stripping brush with plastic scraper built into nose. 5/8", .15mm stiff stainless wire bristles for use where water is being used or rust contamination is an issue. For jobs with small channels or tight access. Brush area measures 1-1/8"x2-1/4".
*Carded, 1.0lb, 6pk
46801 Flexible Brass Stripping Brush
Flexible brass stripping brush with plastic scraper built into nose. 5/8", .15mm soft brass wire bristles for jobs where scratching of metal or soft materials is an issue. also useful where non- sparking cleaning must be done for safety and where chemicals can react to metals. For jobs with small channels or tight access. Brush area measures 1-1/8"x2-1/4".
*Carded, 1.3lb, 6pk
46804 Flexible Nylon Stripping Brush
Flexible nylon stripping brush with plastic scraper built into nose. 5/8", .64mm nylon bristles for areas where scratching of soft materials is an issue. also useful in areas where non-sparking cleaning must be done for safety and where chemicals can react to metals. For small jobs or where access is an issue. Brush area measures 1-1/8"x2-1/4".
*Carded, 1.0lb, 6pk
46802 Stiff Wire Scrub Brush
Carbon steel stiff wire scrub brush with 1-1/4", .35mm stiff black wire bristles to handle cleaning jobs where tight access can be a problem. Shoe handle shape keeps knuckles out of the way. Brush area measures 3/4"x4-3/4".
*Carded, 2.5lb, 6pk
46805 Stiff Wire Stripping Brush with Scraper
Carbon steel stiff wire stripping brush with 1-1/4", .35mm black wire bristles and wide block brush area for big cleaning jobs. Offset handle protects knuckles. Carbon steel scraper on nose for tough removal of rust and paint. Brush area measures 1-1/4"x5".
*Carded, 3.5lb, 6pk
46806 Stiff Wire Stripping Brush with Scraper
Long-handle carbon steel stiff wire stripping brush with 1", .35mm black wire bristles for cleaning jobs where longer reach is needed. Good all-around brush. Thin profile to get in tight areas. Carbon steel scraper on nose for tough removal of rust and paint. Brush area measures 1/2"x5-1/4".
*Carded, 3.0lb, 6pk
46810 Stainless Steel Stripping Brush with Scraper
Long-handle stainless steel stiff wire stripping brush with 1", .35mm stainless wire bristles for cleaning jobs where longer reach is needed. Good all-around brush. Thin to get in tight areas. Carbon steel scraper on nose for tough removal of rust and paint. Brush area measures 1/2"x5-1/4".
*Carded, 3.0lb, 6pk
46809 Stiff Wire Scrub Brush
Stiff wire carbon steel block scrub brush with 1-1/4", .35mm black wire bristles handles big clean-ing jobs. Great heavy-duty wire scrubbers. Can be used to attach to poles with acme thread for comfortable floor cleaning. Brush area measures 2-1/8"x6-5/8".
*Carded, 5.0lb, 6pk
46813
3-in-1 Paint Stripping Wire Brush
This all-purpose brush has .64mm nylon bristles for general cleaning, plus a .15mm brass wire bristle detail brush for areas where scratching of metal or soft materials is an issue. a plastic scraper is also built into the handle for hard-to-clean areas.
*Carded, 1.0lb, 6pk
46807 Flexible Nylon Grout Brush
Small flexible nylon grout brush with 5/8", .64mm nylon bristles. Good size to get between tiles. Soft nylon bristles for areas where scratching of soft materials or coatings is an issue. Brush area measures 5/8"x2-1/4".
*Carded, 2.5lb, 6pk
46811 Flexible Brass Grout Brush
Flexible brass grout brush with 5/8", .15mm brass wire bristles for areas where non-sparking cleaning must be done for safety and where chemicals can react to metals. Brush area measures 5/8"x2-1/4".
*Carded, 1.5lb, 10pk
46812 Stiff Stainless Steel Grout Brush
Stiff stainless steel grout brush with 5/8", .15mm wire bristles for use in water or wet applications. Brush area measures 5/8"x2-1/4".
*Carded, 1.5lb, 10pk
Wood-Handled Wire Brushes
46846 Stiff Carbon Steel Wire Brush with Scraper
Traditional hardwood-handle wire brush with stiff carbon steel wire bristles and scraper. Brush area measures 1-1/2"x5-3/4".
*Carded, 2.55lb, 6pk
46847 Stiff Carbon Steel Wire Brush
Long hardwood shoe-handle wire brush with stiff carbon steel wire bristles. Brush area measures 1-1/16"x5-1/2".
*Carded, 4.3lb, 6pk
46849 Carbon Steel Stripping Brush with Scraper
Traditional hardwood-handle wire brush with stiff carbon steel wire bristles and scraper. Brush area measures 1-1/16"x5-1/2".
*Carded, 4.3lb, 6pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
2120
BRUSHESMAXXGRIP PRO® Wire Brushes
You simply won’t find better wire brushes than these. More 12-gauge (.40mm) wire bristles per square inch, highest quality materials and sturdy, soft-grip ergonomic handles.
46830 11-3/4" High-Carbon Steel Wire Brush
High-carbon steel wire brush has a large block design (6"x1") for large area prepping, with a tapered nose for tight access and corners where low profile or extra reach is needed. ideal for remov-ing flaking paint, rust, calcium, oxidation and corrosion.
*Carded, 2.5lb, 4pk
46831 11-3/4" Stainless Steel Wire Brush
High-quality, corrosion-resistant stainless steel brush has a large block design (6"x1") and long handle for large area prepping. Tapered nose for access to tight areas and corners where low- profile design or extra reach is needed. Perfect for tough, wet jobs.
*Carded, 2.5lb, 4pk
46832 8-3/4" High-Carbon Steel Wire Brush
High-carbon steel wire brush has a small block design (3"x3/4") and tapered nose for detailed prep-ping and tight access. ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion.
*Carded, 1.6lb, 4pk
46833 8-3/4" Stainless Steel Wire Brush
High-quality, corrosion-resistant stainless steel brush has a small block design (3"x3/4") and ta-pered nose for detailed prepping and tight access. The stainless steel bristles are perfect for tough, wet jobs.
*Carded, 1.6lb, 4pk
46834 11-3/4" High-Carbon Steel Wire Brush with Scraper
High-carbon steel wire brush with scraper has a large block design (6"x1") for large area prepping, with a tapered nose for tight access and corners where low profile or extra reach is needed. Hardened .075” thick scraper molded in place. ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion.
*Carded, 2.8lb, 4pk
46835 9-1/4" High-Carbon Steel Wire Brush with Scraper
High-carbon steel wire brush with scraper has a small block design (3-1/4"x1") and tapered nose for detailed prepping and tight access. Hardened .075” thick scraper molded in place. ideal for removing flaking paint, rust, calcium, oxidation and corrosion.
*Carded, 1.85lb, 4pk
46837 8" High-Carbon Steel Wire Brush
High-carbon steel wire brush with sturdy soft-grip handle for prepping medium to large flat surfaces where maximum down-ward force is needed. Large block design (8"x1-1/4") for large area prepping, with a tapered nose for tight access and corners. ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion.
*Carded, 3.0lb, 4pk
46838 8" Stainless Steel Wire Brush
Stainless steel wire brush with sturdy soft-grip handle for prep-ping medium to large flat surfaces where maximum downward force is needed. Large block design (8"x1-1/4") for large area prep-ping, with a tapered nose for tight access and corners. Stainless steel bristles are perfect for tough, wet jobs.
*Carded, 3.0lb, 4pk
46839 9" High-Carbon Steel Wire Brush
High-carbon steel wire brush with sturdy soft-grip handle for prepping large flat surfaces where maximum downward force is needed. Large block design (9"x2") for large area prepping, with a tapered nose for tight access and corners. ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion.
*Carded, 4.1lb, 4pk
46840 6-3/4" High-Carbon Steel Wire Brush
Block-style high-carbon steel brush can be used with or without a pole. Prep large flat surface ar-eas by hand or mount on pole (not included) for scrubbing floor or high areas. acme thread for use with a handle or extension pole.
*Carded, 4.8lb, 4pk
46841 11" High-Carbon Steel Wire Brush
High-carbon steel wire brush has a thin block design (5-1/2"x1") for prepping channels or narrow ar-eas, with tight access and corners where low profile or extra reach is needed. ideal for removing flaking paint, dirt, rust, calcium, oxidation and corrosion.
*Carded, 2.2lb, 4pk
46842 11" Stainless Steel Wire Brush
High-quality, corrosion-resistant wire brush has a thin block design (5-1/2"x1") for prepping channels or narrow areas, with tight access and corners where low profile or extra reach is needed. Perfect for tough, wet jobs.
*Carded, 2.2lb, 4pk
46843 Mini Brush 3 Pack (Brass, Nylon, Stainless)
High-quality set of 3 mini-brushes includes brass, nylon and stain-less steel brushes for applications involving detail work or limited access.
*Bagged, 1.7lb, 6pk
Stripping & Scrub Brushes
a brush for every job! This full line of stripping brushes offers a wide range of designs in carbon steel, brass and stainless steel — all with overmold handles.
46800 Stiff Stainless Steel Stripping Brush
Small stainless steel stripping brush with plastic scraper built into nose. 5/8", .15mm stiff stainless wire bristles for use where water is being used or rust contamination is an issue. For jobs with small channels or tight access. Brush area measures 1-1/8"x2-1/4".
*Carded, 1.0lb, 6pk
46801 Flexible Brass Stripping Brush
Flexible brass stripping brush with plastic scraper built into nose. 5/8", .15mm soft brass wire bristles for jobs where scratching of metal or soft materials is an issue. also useful where non- sparking cleaning must be done for safety and where chemicals can react to metals. For jobs with small channels or tight access. Brush area measures 1-1/8"x2-1/4".
*Carded, 1.3lb, 6pk
46804 Flexible Nylon Stripping Brush
Flexible nylon stripping brush with plastic scraper built into nose. 5/8", .64mm nylon bristles for areas where scratching of soft materials is an issue. also useful in areas where non-sparking cleaning must be done for safety and where chemicals can react to metals. For small jobs or where access is an issue. Brush area measures 1-1/8"x2-1/4".
*Carded, 1.0lb, 6pk
46802 Stiff Wire Scrub Brush
Carbon steel stiff wire scrub brush with 1-1/4", .35mm stiff black wire bristles to handle cleaning jobs where tight access can be a problem. Shoe handle shape keeps knuckles out of the way. Brush area measures 3/4"x4-3/4".
*Carded, 2.5lb, 6pk
46805 Stiff Wire Stripping Brush with Scraper
Carbon steel stiff wire stripping brush with 1-1/4", .35mm black wire bristles and wide block brush area for big cleaning jobs. Offset handle protects knuckles. Carbon steel scraper on nose for tough removal of rust and paint. Brush area measures 1-1/4"x5".
*Carded, 3.5lb, 6pk
46806 Stiff Wire Stripping Brush with Scraper
Long-handle carbon steel stiff wire stripping brush with 1", .35mm black wire bristles for cleaning jobs where longer reach is needed. Good all-around brush. Thin profile to get in tight areas. Carbon steel scraper on nose for tough removal of rust and paint. Brush area measures 1/2"x5-1/4".
*Carded, 3.0lb, 6pk
46810 Stainless Steel Stripping Brush with Scraper
Long-handle stainless steel stiff wire stripping brush with 1", .35mm stainless wire bristles for cleaning jobs where longer reach is needed. Good all-around brush. Thin to get in tight areas. Carbon steel scraper on nose for tough removal of rust and paint. Brush area measures 1/2"x5-1/4".
*Carded, 3.0lb, 6pk
46809 Stiff Wire Scrub Brush
Stiff wire carbon steel block scrub brush with 1-1/4", .35mm black wire bristles handles big clean-ing jobs. Great heavy-duty wire scrubbers. Can be used to attach to poles with acme thread for comfortable floor cleaning. Brush area measures 2-1/8"x6-5/8".
*Carded, 5.0lb, 6pk
46813
3-in-1 Paint Stripping Wire Brush
This all-purpose brush has .64mm nylon bristles for general cleaning, plus a .15mm brass wire bristle detail brush for areas where scratching of metal or soft materials is an issue. a plastic scraper is also built into the handle for hard-to-clean areas.
*Carded, 1.0lb, 6pk
46807 Flexible Nylon Grout Brush
Small flexible nylon grout brush with 5/8", .64mm nylon bristles. Good size to get between tiles. Soft nylon bristles for areas where scratching of soft materials or coatings is an issue. Brush area measures 5/8"x2-1/4".
*Carded, 2.5lb, 6pk
46811 Flexible Brass Grout Brush
Flexible brass grout brush with 5/8", .15mm brass wire bristles for areas where non-sparking cleaning must be done for safety and where chemicals can react to metals. Brush area measures 5/8"x2-1/4".
*Carded, 1.5lb, 10pk
46812 Stiff Stainless Steel Grout Brush
Stiff stainless steel grout brush with 5/8", .15mm wire bristles for use in water or wet applications. Brush area measures 5/8"x2-1/4".
*Carded, 1.5lb, 10pk
Wood-Handled Wire Brushes
46846 Stiff Carbon Steel Wire Brush with Scraper
Traditional hardwood-handle wire brush with stiff carbon steel wire bristles and scraper. Brush area measures 1-1/2"x5-3/4".
*Carded, 2.55lb, 6pk
46847 Stiff Carbon Steel Wire Brush
Long hardwood shoe-handle wire brush with stiff carbon steel wire bristles. Brush area measures 1-1/16"x5-1/2".
*Carded, 4.3lb, 6pk
46849 Carbon Steel Stripping Brush with Scraper
Traditional hardwood-handle wire brush with stiff carbon steel wire bristles and scraper. Brush area measures 1-1/16"x5-1/2".
*Carded, 4.3lb, 6pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
2322
GLASS TOOLS BRUSHES
46850 Carbon Steel Wire Brush
Stiff carbon steel wire brush with long, curved hardwood handle for cleaning jobs where longer reach is needed. Brush area measures 1"x6-1/2".
*Carded, 4.3lb, 6pk
Mini Brushes
46630 3 Brass Bristle Mini Brushes
Non-spark brass brushes remove rust, scale, dirt without scratch-ing surfaces. Clean tools, files, small engine parts, copper and aluminum tubing. 7" offset poly-propylene handles protect hands from work surface. 1/2" bristles.
*Bagged, 2.0lb, 12pk
46640 3 Nylon Bristle Mini Brushes
Use for most household cleaning tasks and hard-to-reach corners. Nylon bristles won’t scratch most surfaces and resist most common paint thinners. Clean tile, grouting around tubs, sinks and windows. 7" offset polypropylene handles protect hands from work surface. 1/2" bristles.
*Bagged, 1.8lb, 12pk
46650 3 Stainless Bristle Mini Brushes
Corrosion-resistant stainless mini-brushes for removing rust, scale, dirt and for general surface preparation. Clean tools, small engine parts, copper and alumi-num tubing, grills or any other hard surface. 7" offset polypropyl-ene handles protect hands from work surface. 1/2" bristles.
*Bagged, 2.0lb, 12pk
46660 Mini Brush 3 Pack (Brass, Nylon, Stainless)
Small profile brushes for general surface preparation and for removing rust, scale or dirt. Clean tools, small engine parts, copper and aluminum tubing, grills, stoves or any other hard surface. 7" offset polypropylene handles protect hands from work surface. 1 each in brass, nylon and stainless steel. 1/2" bristle.
*Bagged, 2.0lb, 12pk
Glass/Razor Scrapers and Blades
Great to keep handy for cleanup after painting windows and doors. also useful for taking stickers off mirrors, glass and more.
Retractable Razor Blade Scrapers
13000 Delta™ Scraper plus 1 Blade
Ergonomically engineered to fit the fist for better grip and precise control. Large ribbed control button for safer operation. Blade track design minimizes clogging for positive blade extension. includes one single-edge blade.
*Carded, 1.8lb, 10pk
13010 Delta™ Heavy Duty Glass Scraper
Ergonomically engineered to fit the fist for better grip and precise control. Large ribbed control button for safer operation. Blade track design minimizes clogging for positive blade extension. For use with single-edge razor blades. Blades not included.
*Carded, 2.5lb, 20pk
13040 Glass Scraper with 5 Blades Stored Inside
Glass scraper with retractable blade has an ergonomic design with overmold for comfort and sure grip. Stores up to 5 blades in handle (blades included). accepts single-edge razor blades.
*Carded, 1.8lb, 10pk
13050 Delta™ Heavy Duty Glass Scraper plus 5 Blades
Ergonomically engineered shape for better grip and precise control. Large ribbed control button for safer operation. Blade track design minimizes clogging for positive blade extension and safe retraction. Blade offset at 5° to get under paint. 5 single-edge razor blades included.
*Carded, 2.0lb, 10pk
13080 Utility Blade Glass Scraper
retractable blade with positive lock. Built-in 1/16” sash guide maintains paint/glass seal. accepts all standard utility knife blades. 1 heavy-duty blade included.
*Carded, 1.4lb, 10pk
Fixed Blade Scrapers
13020 Mini Glass Scraper
rugged polypropylene construc-tion resists most paint thinners. One single-edge razor blade included.
*Carded, 0.5lb, 10pk
13030 Mini Glass Scraper with 5 Blades Stored Inside
Conveniently stores 5 razor blades in handle. Polypropylene construction. accepts standard single-edge razor blades. 5 blades included.
*Carded, 0.7lb, 10pk
13065 Folding Glass Scraper with 5 Blades
Metal construction opens like a pocketknife. Locks in three scraping positions. Measures 7-1/2” overall. 5 single-edge razor blades included.
*Carded, 4.0lb, 10pk
13070 Long Handle Glass Scraper with 5 Blades
Offset angled metal frame with contoured polypropylene handle for extra leverage. accepts standard single-edge blades. 5 blades included.
*Carded, 1.8lb, 5pk
33250 Quick-change 4" Glass Scraper with Blade Storage
replace 4" blade fast and without tools. Overmold handle provides a secure, comfortable grip. Stores up to 5 blades in the handle. 1 reversible blade included; one side scrapes, the other shaves.
*Carded, 2.4lb, 10pk
Single Edge Blades
33255 Universal Blades 5 Pack
Versatile 4" replacement blades also snap off to fit 3-1/4" scrap-ers. Fits HYDE® scraper #33250 and other scrapers.
*Carded, 0.7lb, 10pk
13120 Single-edge Razor Blades 5 Pack
.009" thick. industrial-quality steel. individually wrapped for safety.
*Boxed, 0.9lb, 20pk
13110 Single-edge Razor Blades 10 Pack
.009" thick. industrial-quality steel. individually wrapped for safety. 2 packs of 5 blades.
*Carded, 1.1lb, 10pk
13135 Single-edge Razor Blades 100-Blade Storage Box
.009" thick. industrial-quality steel. individually wrapped for safety. Convenient storage box.
*Boxed, 0.7lb, 1pk
13125 Single-edge Razor Blades 100-Blade Dispenser
.009" thick. industrial-quality steel. individually wrapped for safety. reusable dispenser package.
*Clam pack, 7.8lb, 10pk
13145 Single-edge Razor Blades 10-Blade Dispenser
.009" thick. industrial-quality steel. individually wrapped for safety. Used-blade storage for safe disposal.
*Carded, 0.7lb, 10pk
13138 Single-edge Razor Blades 50-Blade Dispenser
.009" thick. industrial-quality steel. individually wrapped for safety. 10 packs of 5 blades. Convenient storage box.
*Boxed, 5.0lb, 1pk
13140 Single-edge Razor Blades 100-Blade Merchandiser
.009" thick. industrial-quality steel. individually wrapped for safety. 20 packs of 5 blades. Convenient storage box.
*Boxed, 1.0lb, 1pk
13127 Heavy Duty (.012") Single-edge Blades 100 Pack"
.012" thick. industrial-quality steel. individually wrapped for safety. reusable plastic container.
*Clam pack, 8.0lb, 10pk
Glazing Tools
45700 Carbide Wheel Glass Cutter
Heavy-duty tungsten carbide cutting wheel. Balanced cast metal handle.
*Carded, 0.5lb, 5pk
02950 Black & Silver® 2-in-1 Glazing Tool
1-1/4" scraper for remov-ing old putty and driving push-style glazing points and a slotted V-blade for applying a smooth strip of putty.
*Carded, 1.0lb, 5pk
45760 Glazing Points, Push-Style
Push-style points hold glass against sash beneath putty.
*Carded, 0.6lb, 10pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
Do it the hard way, or the HYDE® way.
Hidden BenefitNo more hunting through rusty blades in the cellar! These new HYDE® scrapers come with extra blades packed in the handle, so they’re always handy when you need a fresh one.
Part #33250
Part #13040
Part #13030
23
GLASS TOOLSSingle Edge Blades
33255 Universal Blades 5 Pack
Versatile 4" replacement blades also snap off to fit 3-1/4" scrap-ers. Fits HYDE® scraper #33250 and other scrapers.
*Carded, 0.7lb, 10pk
13120 Single-edge Razor Blades 5 Pack
.009" thick. Industrial-quality steel. Individually wrapped for safety.
*Boxed, 0.9lb, 20pk
13110 Single-edge Razor Blades 10 Pack
.009" thick. Industrial-quality steel. Individually wrapped for safety. 2 packs of 5 blades.
*Carded, 1.1lb, 10pk
13135 Single-edge Razor Blades 100-Blade Storage Box
.009" thick. Industrial-quality steel. Individually wrapped for safety. Convenient storage box.
*Boxed, 0.7lb, 1pk
13125 Single-edge Razor Blades 100-Blade Dispenser
.009" thick. Industrial-quality steel. Individually wrapped for safety. Reusable dispenser package.
*Clam pack, 7.8lb, 10pk
13145 Single-edge Razor Blades 10-Blade Dispenser
.009" thick. Industrial-quality steel. Individually wrapped for safety. Used-blade storage for safe disposal.
*Carded, 0.7lb, 10pk
13138 Single-edge Razor Blades 50-Blade Dispenser
.009" thick. Industrial-quality steel. Individually wrapped for safety. 10 packs of 5 blades. Convenient storage box.
*Boxed, 5.0lb, 1pk
13140 Single-edge Razor Blades 100-Blade Merchandiser
.009" thick. Industrial-quality steel. Individually wrapped for safety. 20 packs of 5 blades. Convenient storage box.
*Boxed, 1.0lb, 1pk
13127 Heavy Duty (.012") Single-edge Blades 100 Pack"
.012" thick. Industrial-quality steel. Individually wrapped for safety. Reusable plastic container.
*Clam pack, 8.0lb, 10pk
Glazing Tools
45700 Carbide Wheel Glass Cutter
Heavy-duty tungsten carbide cutting wheel. Balanced cast metal handle.
*Carded, 0.5lb, 5pk
02950 Black & Silver® 2-in-1 Glazing Tool
1-1/4" scraper for remov-ing old putty and driving push-style glazing points and a slotted V-blade for applying a smooth strip of putty.
*Carded, 1.0lb, 5pk
45760 Glazing Points, Push-Style
Push-style points hold glass against sash beneath putty.
*Carded, 0.6lb, 10pk
*Retailer Pack Information
Do it the hard way, or the HYDE® way.
Hidden BenefitNo more hunting through rusty blades in the cellar! These new HYDE® scrapers come with extra blades packed in the handle, so they’re always handy when you need a fresh one.
Part #33250
Part #13040
Part #13030
2524
WATER TOOLS
Do it the HYDE® way at hydetools.com
Dozens of home uses:• Deck cleaning• Patio furniture• House siding• Clean gutters
The HYDE® PivotJet®
Turns any hose into a powerful cleaning machineVirtually every home has a hose, and millions more have pressure wash-ers for heavy-duty cleaning. But for dozens of cleanup jobs around the house, something in-between would be a much better choice. that’s where the HYDE® PivotJet® comes in. the PivotJet® and PivotJet® Pro are innovative spray tools that attach directly to your garden hose. they not only add extra reach and an adjustable spray pattern – they feature a pivoting nozzle that gets into tight spaces and lets the tool do the work instead of your body. No more bending, kneeling or stooping.
Designed to make both home and commercial jobs easier, this patent-ed tool design includes a pivoting nozzle that redirects the water with the twist of the grip. For easy cleaning with detergents and commercial cleaners, the Pro model also features a clean water/soap reservoir with mixture and liquid ratio settings.
Accepts any standard hose accessories
Tough jobs just got easier
Attaches to your garden hose
• Windows• Driveways• Walkways• Around pools
• Car & truck care• Boat cleaning• Fences and sheds• Foundations
28470 The HYDE® PivotJet® Pro with Soap Reservoir*Carded, 1.7lb, 1pk
28460 The HYDE® PivotJet® *Carded, 1.25lb, 1pk
• Patented pivoting nozzle directs water stream
• Slide grip pivots nozzle up to 135°
• Variable spray pattern adjusts from mist to high pressure
• Built-in soap reservoir with clean water/soap mixture control (Pro model only)
• 38" to 42" of extra reach (models vary)
• Lightweight aluminum pole with foam comfort grip
• Rubberized nozzle tip protects surfaces
• Free-spinning hose interface prevents hose kinking
• Built-in hanger
• Accepts any standard garden hose accessories
*Retailer Pack Information
25
Dozens of home uses:• Deck cleaning• Patio furniture• House siding• Clean gutters
• Windows• Driveways• Walkways• Around pools
• Car & truck care• Boat cleaning• Fences and sheds• Foundations
28470 The HYDE® PivotJet® Pro with Soap Reservoir*Carded, 1.7lb, 1pk
28460 The HYDE® PivotJet® *Carded, 1.25lb, 1pk
• Patented pivoting nozzle directs water stream
• Slide grip pivots nozzle up to 135°
• Variable spray pattern adjusts from mist to high pressure
• Built-in soap reservoir with clean water/soap mixture control (Pro model only)
• 38" to 42" of extra reach (models vary)
• Lightweight aluminum pole with foam comfort grip
• Rubberized nozzle tip protects surfaces
• Free-spinning hose interface prevents hose kinking
• Built-in hanger
• Accepts any standard garden hose accessories
*Retailer Pack Information
2726
PRESSURE WASHING Pivot Nozzle Wands
adding a Pivot Nozzle Wand to your pressure washer allows you to step back, stay dry and reach into every nook and cranny without pain and strain. With a twist of the handle the patented nozzle pivots up to 90° as you work, so you can reach in, over, under or around obstacles and still keep a 90° angle to the surface for maximum power. With the Pivot Nozzle Wand, the tool does all the work, making pressure washing more productive and much less tiring. Models are available for use with all major brands of gas and electric pressure washers. U.S. Patent #6979644. Other U.S. and international Patents Pending.
28420 18" Pivot Nozzle Wand for Electric Pressure Washers
rated for electric pressure wash-ers up to 2000 PSi, the 18" Pivot Nozzle Wand is perfect for clean-ing decks, house siding, cars, aTVs and more. includes 4 adapt-ers for use with all major brands of electric pressure washers.
*Clam pack, 5.9lb, 4pk
28430 28" Chrome-Plated Wand for Gas Pressure Washers (M22-style)
Designed specifically for M22-style gun fittings, the 28" Pivot Nozzle Wand is a professional grade tool engineered to stand up to the most demanding jobs.
*Clam pack, 2.9lb, 1pk
28440 40" Chrome-Plated Wand for Gas Pressure Washers (1/4"-style)
rated for up to 4000 PSi and designed specifically for 1/4" “female” gun fittings. Soft-touch, rubberized grip provides non-slip control. Heavy-duty lightweight housing with durable chrome- plated shaft.
*Clam pack, 3.3lb, 1pk
28450 40" Stainless Steel Wand for Gas Pressure Washers (1/4"-style)
rated for up to 4000 PSi and designed specifically for 1/4" “female” gun fittings. Soft-touch, rubberized grip provides non-slip control. Heavy-duty lightweight housing with stainless steel shaft.
*Clam pack, 3.3lb, 1pk
Turbo NozzlesPowerful ceramic tip designed for blasting and removing stubborn and encrusted stains. Produces a high-pressure (0°) pencil jet stream and rotates it at 3000 rPM creat-ing a 4” to 8” cleaning circle. Fits most consumer-grade pressure washers with quick-connect style connections and includes a male quick-connect plug (aL-PLUG 1/4mB). it is fully compatible with the gas and electric versions of the HYDE® Pivot Nozzle Wand.
28301 Pressure Washer Turbo Nozzle — #3.0 Orifice*Clam pack, 12.7oz, 4pk (10.2 oz)
28302 Pressure Washer Turbo Nozzle — #4.0 Orifice*Clam pack, 12.7oz, 4pk (10.2 oz)
Rust-resistant TipsFive rust-resistant stainless steel spray tips with industry-standard color-coding that designates spray angles ranging from 0° to 65°. includes 0° red, concentrated pencil jet; 15° yellow, high performance; 25° green, multi-purpose; 40° white, sensitive surfaces; 65° black, low pressure detergent application. Fit gas and electric versions of the HYDE® Pivot Nozzle Wand and can be used with most consumer-grade electric and gas-powered pressure washers with quick-connect technology. Constructed with a 1/4" male plug that snaps into a 1/4" quick-disconnect female coupler on the end of the wand.
28303 Pressure Washer Spray Tips — #3.0 Orifice*Clam pack, 1.25oz, 4pk (4.5 oz)
28304 Pressure Washer Spray Tips — #4.0 Orifice*Clam pack, 1.25oz, 4pk (4.5 oz)
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
28" GAS-POWERED Pivot Nozzle Wand designed for use with M22-style guns up to 4000 PSI
Twist Grip ControlDirects nozzle and locks in place with one hand. Soft-touch, rubberized grips for non-slip control.
Soft Touch GripsNon-slip grips for less fatigue and firm control.
Heavy Duty, Lightweight HousingMade HYDE® tough for long life and trouble-free use.
Chrome Plated Steel ShaftFor durability and corrosion resistance.
Head Pivots 90°Direct power where you need it every time.
Connects to M22 Pressure Washer Gun Fittings
18" ELECTRIC Pivot Nozzle Wand designed for use with electric pressure washers up to 2000 PSI
Slide Control Grip Simply push or pull to pivot the nozzle.
Use Adapters to Connect to Electric Pressure Washer Handles
Head Pivots 90°Direct power where you need it every time.
Heavy Duty, Lightweight Housing
Chrome Plated Steel ShaftFor durability and corrosion resistance. (Also available in stainless steel – #28450)
Heavy Duty, Lightweight HousingMade HYDE® tough for long life and trouble-free use.
Twist Grip ControlDirects nozzle and locks in place with one hand. Soft-touch, rubberized grips for non-slip control.
Soft Touch GripsNon-slip grips for less fatigue and firm control.
Head Pivots 90°Direct power where you need it every time.Fits 1/4 inch
Pressure Washer Gun Fittings
40" GAS-POWERED Pivot Nozzle Wand designed for use with 1/4"-style guns up to 4000 PSI
Item #28420
Item #28430
Item #28440
27
Pivot Nozzle Wands
Adding a Pivot Nozzle Wand to your pressure washer allows you to step back, stay dry and reach into every nook and cranny without pain and strain. With a twist of the handle the patented nozzle pivots up to 90° as you work, so you can reach in, over, under or around obstacles and still keep a 90° angle to the surface for maximum power. With the Pivot Nozzle Wand, the tool does all the work, making pressure washing more productive and much less tiring. Models are available for use with all major brands of gas and electric pressure washers. U.S. Patent #6979644. Other U.S. and International Patents Pending.
28420 18" Pivot Nozzle Wand for Electric Pressure Washers
Rated for electric pressure wash-ers up to 2000 PSI, the 18" Pivot Nozzle Wand is perfect for clean-ing decks, house siding, cars, ATVs and more. Includes 4 adapt-ers for use with all major brands of electric pressure washers.
*Clam pack, 5.9lb, 4pk
28430 28" Chrome-Plated Wand for Gas Pressure Washers (M22-style)
Designed specifically for M22-style gun fittings, the 28" Pivot Nozzle Wand is a professional grade tool engineered to stand up to the most demanding jobs.
*Clam pack, 2.9lb, 1pk
28440 40" Chrome-Plated Wand for Gas Pressure Washers (1/4"-style)
Rated for up to 4000 PSI and designed specifically for 1/4" “female” gun fittings. Soft-touch, rubberized grip provides non-slip control. Heavy-duty lightweight housing with durable chrome- plated shaft.
*Clam pack, 3.3lb, 1pk
28450 40" Stainless Steel Wand for Gas Pressure Washers (1/4"-style)
Rated for up to 4000 PSI and designed specifically for 1/4" “female” gun fittings. Soft-touch, rubberized grip provides non-slip control. Heavy-duty lightweight housing with stainless steel shaft.
*Clam pack, 3.3lb, 1pk
Turbo NozzlesPowerful ceramic tip designed for blasting and removing stubborn and encrusted stains. Produces a high-pressure (0°) pencil jet stream and rotates it at 3000 RPM creat-ing a 4” to 8” cleaning circle. Fits most consumer-grade pressure washers with quick-connect style connections and includes a male quick-connect plug (AL-PLUG 1/4mB). It is fully compatible with the gas and electric versions of the HYDE® Pivot Nozzle Wand.
28301 Pressure Washer Turbo Nozzle — #3.0 Orifice*Clam pack, 12.7oz, 4pk (10.2 oz)
28302 Pressure Washer Turbo Nozzle — #4.0 Orifice*Clam pack, 12.7oz, 4pk (10.2 oz)
Rust-resistant TipsFive rust-resistant stainless steel spray tips with industry-standard color-coding that designates spray angles ranging from 0° to 65°. Includes 0° red, concentrated pencil jet; 15° yellow, high performance; 25° green, multi-purpose; 40° white, sensitive surfaces; 65° black, low pressure detergent application. Fit gas and electric versions of the HYDE® Pivot Nozzle Wand and can be used with most consumer-grade electric and gas-powered pressure washers with quick-connect technology. Constructed with a 1/4" male plug that snaps into a 1/4" quick-disconnect female coupler on the end of the wand.
28303 Pressure Washer Spray Tips — #3.0 Orifice*Clam pack, 1.25oz, 4pk (4.5 oz)
28304 Pressure Washer Spray Tips — #4.0 Orifice*Clam pack, 1.25oz, 4pk (4.5 oz)
*Retailer Pack Information
28
AIRLESS SPRAY TOOLSThe RVT Airless Spray System
The HYDE® RVT Airless Spray System is simply the best airless spray system on the market. It comes with a telescoping Quick-Reach® pole that extends up to 8-1/2', giving paint crews more reach for spraying exteriors, stair-wells, raised decks and even cathedral ceilings without climbing ladders or setting up scaffolding. A lightweight spray head at the top of the pole makes this system easy to use for an extended period. No heavy spray gun at the top of a teetering pole! As you come down a wall, you can easily switch from pole spraying to the handheld gun (included) — without powering down! No paint goes through the pole, so cleanup is easy.
28700 HYDE® Airless Spray System with RVT Technology
Full kit includes an airless spray gun with an RVT valve, tip, tip guard and inline filter, and a 5-1/2' to 8-1/2' spray pole. Gun is fully assembled and ready to spray. U.S. Patents #6378922, #5485960 and patents pending.
*Clam pack, 6.6lb, 1pk
28710 RVT Spray Gun
Includes gun, RVT valve, tip, tip guard and inline filter.
*Clam pack, 4.4lb, 2pk
28715 RVT Replacement Valve
For use with RVT System (item #28700) or Spray Gun (item #28710).
*Clam pack, 2.lb, 4pk
28720 RVT Replacement Spray Mount
Replacement Spray Mount for RVT spray system. Also fits all RVT-compatible QuickReach® spray poles (items #28670, #28680, #28690).
*Clam pack, 3.8lb, 4pk
28735 RVT Replacement Inline Filter Housing
Inline filter housing for use with the HYDE® RVT System (item #28700) or Spray Gun (item #28710).
*Clam pack, 0.8lb, 5pk
28740 RVT Replacement Filter
Replacement filter for HYDE® RVT System (item #28700) or Valve (item #28715).
*Clam pack, 0.3lb, 5pk
Do it the HYDE® way at hydetools.com
The HYDE® RVT system is a better way to spray.
Paint every job faster with less fatigue.Finally, an airless spray system that lets you spray non-stop, switching easily from gun to spray pole as you paint. Unlike most poles, the RVT telescopes … extending your reach up to 12 feet.
No more ladders or scaffolding. No powering down or depressurizing. And no need to carry a heavy gun at the top of the pole. Just pop the lightweight valve off the gun, mount it to the pole and keep on spraying. No paint runs through the pole, so even cleanup is easy!
“The HYDE® RVT saves us time and an unbelievable amount of money.”
Jay Bowen, Eastern Painting and Refinishing Hyde Park, VT
2928
QuickReach® Telescoping Poles
Quickreach® Telescoping Poles extend out to their maximum height in seconds, offering the professional painter freedom of reach and cover-age. Lengths vary to accommodate indoor, one-story applications or large jobs requiring paint heights up to 16'. Can be used with all major brands of spray gun. Can also be used with the HYDE® rVT System (item #28700). U.S. Patents #6378922, #5485960.
28670 4.5'-6.5' QuickReach® Telescoping Spray Pole
Extends from 4.5' to 6.5' for use in applications with ceilings or paint heights up to 10'. Perfect for one-story exterior and indoor painting.
*Boxed, 4.0lb, 1pk
28680 5.5'-8.5' QuickReach® Telescoping Spray Pole
Extends from 5.5' to 8.5', offering the professional painter freedom of reach and coverage for a wide range of jobs. Small enough for indoor use or painting in tight spaces, but long enough when extended to reach 16' ceilings.
*Boxed, 4.7lb, 1pk
28690 7.5'-12' QuickReach® Telescoping Spray Pole
Extends from 7.5' to 12', giving the professional maximum extension for painting exteriors, cathedral ceilings or areas normally reached on a ladder.
*Boxed, 5.7lb, 1pk
28730 QuickReach® Replacement Mount (RVT Compatible)
Quick-connect replacement mount for rVT-compatible Quick-reach® poles (items #28670, #28680, #28690) or with rVT System (item #28700).
*Boxed, 4.6lb, 4pk
AnglePRO® Spray Poles
The anglePrO® airless spray pole has a patented lever that lets you change the spray angle up to 145° without stopping to manually adjust. Quickly paint soffits, closets, ductwork or any other job that requires reaching into tight areas. U.S. Patent #6976644.
28260 3' AnglePRO® Spray Pole
Spray nonstop while adjusting your angle for maximum cover- age of complex angles or open framework. 3' pole, pressure rated to 4000 PSi for most paint and coating applications.
*Boxed, 2.0lb, 1pk
28270 5' AnglePRO® Spray Pole
5' pole, pressure rated to 4000 PSi for most paint and coating applications.
*Boxed, 3.0lb, 1pk
PROShield® Spray Shields
These shields, designed for the paint and drywall trades, shield surfaces when spraying paint or texture. Especially useful with extension poles. The shields have a PivotNeck system that adjusts to any angle, plus a runoff lip and rustproof blades. Furnished with 18" acme-threaded hardwood handles. U.S. Patent #4962722.
Aluminum Spray Shields
28010 24" x 9" Flexible Aluminum Spray Shield*Labeled, 8.9lb, 6pk
28000 36" x 9" Flexible Aluminum Spray Shield*Labeled, 11.9lb, 6pk
28020 24" x 9" Stiff Aluminum Spray Shield*Labeled, 9.0lb, 6pk
28030 36" x 9" Stiff Aluminum Spray Shield*Labeled, 11.9lb, 3pk
28040 48" x 9" Stiff Aluminum Spray Shield*Labeled, 14.9lb, 6pk
Polystyrene Spray Shields
28050 36" x 9" Flexible Polystyrene Spray Shield*Labeled, 10.0lb, 6pk
28060 24" x 9" Flexible Polystyrene Spray Shield*Labeled, 8.2lb, 6pk
28100 Spray Shield Cardboard Clip with 18" Handle
High-impact polystyrene clip holds cardboard or other sheet good supplied by customer. Cut custom shapes and sizes. Patented Pivot-Neck system adjusts shield to any angle. 18" acme thread hardwood handle. Or use with extension pole.
*Carded, 5.1lb, 6pk
28600 31" x 10" Cardboard Spray Shield Blades (50)
Single-use corrugated panels for use with #28100 spray shield clip. Cut custom shapes and sizes for each application. 50 per box.
*Boxed, 14.0lb, 50pk
28070 18" Replacement Hardwood Handle
replacement pole for any ProShield® spray shield or cardboard clip #28100.
*Carded, 2.0lb, 6pk
AIRLESS SPRAY TOOLSThe RVT Airless Spray System
The HYDE® rVT airless Spray System is simply the best airless spray system on the market. it comes with a telescoping Quick-reach® pole that extends up to 8-1/2', giving paint crews more reach for spraying exteriors, stair-wells, raised decks and even cathedral ceilings without climbing ladders or setting up scaffolding. a lightweight spray head at the top of the pole makes this system easy to use for an extended period. No heavy spray gun at the top of a teetering pole! as you come down a wall, you can easily switch from pole spraying to the handheld gun (included) — without powering down! No paint goes through the pole, so cleanup is easy.
28700 HYDE® Airless Spray System with RVT Technology
Full kit includes an airless spray gun with an rVT valve, tip, tip guard and inline filter, and a 5-1/2' to 8-1/2' spray pole. Gun is fully assembled and ready to spray. U.S. Patents #6378922, #5485960 and patents pending.
*Clam pack, 6.6lb, 1pk
28710 RVT Spray Gun
includes gun, rVT valve, tip, tip guard and inline filter.
*Clam pack, 4.4lb, 2pk
28715 RVT Replacement Valve
For use with rVT System (item #28700) or Spray Gun (item #28710).
*Clam pack, 2.lb, 4pk
28720 RVT Replacement Spray Mount
replacement Spray Mount for rVT spray system. also fits all rVT-compatible Quickreach® spray poles (items #28670, #28680, #28690).
*Clam pack, 3.8lb, 4pk
28735 RVT Replacement Inline Filter Housing
inline filter housing for use with the HYDE® rVT System (item #28700) or Spray Gun (item #28710).
*Clam pack, 0.8lb, 5pk
28740 RVT Replacement Filter
replacement filter for HYDE® rVT System (item #28700) or Valve (item #28715).
*Clam pack, 0.3lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
The HYDE® RVT system is a better way to spray.
Paint every job faster with less fatigue.Finally, an airless spray system that lets you spray non-stop, switching easily from gun to spray pole as you paint. Unlike most poles, the rVt telescopes … extending your reach up to 12 feet.
No more ladders or scaffolding. No powering down or depressurizing. and no need to carry a heavy gun at the top of the pole. Just pop the lightweight valve off the gun, mount it to the pole and keep on spraying. No paint runs through the pole, so even cleanup is easy!
“The HYDE® RVT saves us time and an unbelievable amount of money.”
Jay Bowen, Eastern Painting and refinishing Hyde Park, Vt
30
PAINTING ACCESSORIESCorner Ease® Paint Roller
This specialty roller creates a professional finish when painting corners, edging, fences, deck rail-ings and other difficult areas. The roller tray provided is designed to sit within a 5-gallon bucket rather than for use on a flat surface. This roller performs best when well-loaded with paint, directly from the bucket.
45820 Corner Ease® Lambswool Roller & Tray
Includes roller hub, cover and paint tray/grid. The 100% lambswool cover creates a tight, professional stipple with no edge marks, drips, gaps or sloppy fat edges. Replacement covers available (#45850).
*Boxed, 5.0lb, 4pk
45850 Corner Ease® Lambswool Replacement Cover
Lambswool replacement cover for use with Corner Ease® (#45820).
*Bagged, 1.3lb, 12pk
Paint Pour Spouts
45970 5 Gallon Pour Spout
Screw top and tint plug spout for 5-gallon bucket allows for spill-free pouring of paint, sealer and other liquids. Sturdy, easy to clean and leak-proof.
*Labeled, 0.5lb, 5pk
Pour & Roll™ Pour Spout and Roller GridAttach pour spout to 1-gallon paint can to avoid spills when pouring paint. Also acts as a brush wipe. Plastic grid attaches to rim for painting with a 4" roller right from the can. Grid has 2 positions for use with full and partially used cans.
45160 Pour & Roll™ for Metal Cans
*Carded, 1.8lb, 8pk
45161 Pour & Roll™ for Plastic Cans
*Carded, 1.8lb, 8pk
Paint Mixers
43420 1-Quart/Gallon Paint Mixer, for use with drills
Mix paint, adhesives, coatings, stains and wall texture in quart or gallon containers. High-perfor-mance mixer for use with electric drill. Polypropylene impellers and plated steel drive shaft resist corrosion and clean up quickly. 11" x 1/4" hex shaft, 2-5/8" impellers.
*Carded, 1.9lb, 6pk
43430 5-Gallon Paint Mixer, for use with drills
Mix paint, adhesives, coatings, stains and wall texture in 1- or 5-gallon containers. (For epoxies, use a metal mixer.) High-perfor-mance mixer for use with electric drill. Polypropylene impellers and plated steel drive shaft resist corrosion and clean up quickly. 17-1/2" x 5/16" hex shaft, 3-1/8" impellers.
*Carded, 3.2lb, 6pk
43460 Multi-Blade Paint Mixer, for use with drills
For fast, thorough mixing in quart and gallon cans. Lifts and mixes solids from the bottom of paint cans. Rugged polypropylene with 7" hexagonal shaft for use with 3/8" drill. Easy to clean. (For epoxies, use a metal mixer.)
*Carded, 1.0lb, 10pk
Paint Shields and Guides
45000 10" Aluminum Paint Shield
Curved spring aluminum paint shield masks window glass and other areas. Offset handle keeps hands away from working area. Blade measures 10".
*Labeled, 0.3lb, 10pk
45005 15" Aluminum Paint Shield
Curved spring aluminum paint shield masks window glass and other areas. Offset handle keeps hands away from working area. Blade measures 15".
*Labeled, 1.0lb, 20pk
45805 11-1/2" Mini Guide™ Paint Shield & Smoothing Tool
Use as a paint shield, smoothing tool for wallcovering material or drywall compound and as a straightedge for trimming. Stain-less steel blade extends beyond handle to reach into corners. High-impact styrene handle. Large holes to hang tool.
*Labeled, 1.0lb, 5pk
45810 24-1/2" Super Guide™ Paint Shield & Smoothing Tool
Use as a paint shield, smoothing tool for wallcovering material or drywall compound and as a straightedge for trimming. Stain-less steel blade extends beyond handle to reach into corners. High-impact styrene handle. Large holes to hang tool.
*Labeled, 2.7lb, 5pk
Do it the HYDE® way at hydetools.com
31
45807 8" Smoothing Tool/ Paint Shield
Smooth wallcovering, drywall compound and other materi-als. Also useful as a trim guide and paint shield. Sturdy white polypropylene construction with tapered working edge for flexibili-ty. Rounded edges won’t mark or damage work.
*Labeled, 1.5lb, 10pk
Black & Silver® Brush & Roller Cleaners
Every painter appreciates quick, easy cleanup. Regular cleaning with this patented tool also extends the life of brushes and rollers. Rust and chemical resistant. Available with or without Hammer Head® end, useful for closing cans. Guaranteed forever. U.S. Patent #435154.
45960 Black & Silver® Stainless Steel Brush & Roller Cleaner*Carded, 1.0lb, 5pk
45980 Black & Silver® Stainless Steel Brush & Roller Cleaner with Hammer Head® end*Labeled, 1.1lb, 5pk
Other Paint Cleanup Tools
44250 Quickly Clean™ Glove
Clean your hands and your tools without harsh chemicals or scouring pads! Just wet the glove and wear it on one hand to finish cleanup fast with nothing but water. It removes paint, caulk, ad-hesive, grease and more, allowing for easy cleanup of tools, brushes, rollers, counters, sinks and more. An indispensable item for paint-ers, mechanics and hobbyists!
*Carded, 0.6lb, 5pk
45950 Paint Brush Comb
Use to clean and restore paint-brushes. Sharp, pointed stainless steel teeth penetrate bristles to loosen and remove old paint. Polypropylene handle unaffected by most common paint thinners.
*Carded, 1.5lb, 10pk
43470 Paint Brush & Roller Spinner/Cleaning Tool
Clean paintbrushes up to 6" and all paint rollers using centrifugal force. Durable steel construction with ball bearing mechanism for smooth operation. Prolongs life of brushes and rollers without harm to bristles.
*Carded, 1.5lb, 1pk
47100 PaintMiser 10-in-1 Multi-Tool
Environmentally friendly multiuse tool fits in 1- and 5-gallon cans for mixing and scraping paint can clean. Opens cans, cleans extra paint from rim, sides and bottom of can. Also cleans rollers.
*Carded, 3.0lb, 6pk
Painting Accessories
45945 Painter’s Assistant™ Multi-use Painter’s Tool
The HYDE® Painter’s Assistant™ is a multi-use painter’s tool that works as a carrying handle for 1-and 2-quart containers. It also features a magnetized surface that acts as a convenient brush holder. It can be clipped directly onto a roller tray to provide a fool-proof brush holder right where it‘s needed.
*Carded, 1.2lb, 8pk
*Retailer Pack Information
HYDE®
Painter’s Assistant™
It’s like having an extra pair of hands.
Part #45945
Do it the hard way, or the HYDE® way.
3332
PAINTING ACCESSORIES
45050 Pail Hooks (2)
Specially designed to hang pails to the outside of a ladder. One-piece plated steel construction. Flat ends can be used to open paint cans. Not recommended for 5-gallon pails.
*Labeled, 1.9lb, 10pk
45110 Swivel Pail Hook
Pointed steel hook with swivel hinge hangs paint pails from a ladder or windowsill. Snap catch holds pail‘s handle firmly. Not recommended for 5-gallon pails.
*Labeled, 1.5lb, 10pk
45115 5-Quart Paint Pail
rugged polyethylene pail for use with oil base or latex paint or wallcovering paste. Quart and liter graduations marked inside. Metal reinforced rim and plated metal handle.
*Labeled, 6.0lb, 10pk
46445 2 Paint Can/Bottle Openers
Use to remove paint can lids with-out damaging seal. Loop-style bottle opener. One-piece plated steel construction.
*Labeled, 1.0lb, 10pk
46455 250 Paint Can/ Bottle Openers
Use to remove paint can lids with-out damaging seal. Loop-style bottle opener. One-piece plated steel construction.
*Boxed, 1.1lb, 250pk
47050 14" Paint Paddle
14" wooden paint paddle for 1- to 5-gallon containers.
*Bulk, 22.0lb, 500pk
44280 Tack Cloth
Open mesh 18"x36" bleached cheesecloth is chemically treated to remove dust, dirt and sanding residue. Wipes metal, wood or plaster surfaces clean prior to painting and finishing.
*Bagged, 0.5lb, 10pk
45600 9-1/2" Bent Pry Bar
remove molding, open boxes, scrape paint and pull nails. Electrocoated high carbon steel has been hardened and tempered, with nail slot and sharp, ground ends for scraping.
*Labeled, 1.5lb, 5pk
43510 Painter’s Pyramid® Painting System 10 Pack
Pyramids hold the workpiece above your working surface for less mess and easier cleanup. Non-stick points have minimal contact, allowing you to paint one side, immediately flip the workpiece and complete the job without the drying time. Great for cabinet doors, shutters, furniture, crafts, moldings. Supports up to 200 pounds. Chemical resistant. Pack of 10.
*Carded, 1.1lb, 4pk
46803 Extension Brush Holder
Paint without a ladder using this convenient brush holder. adjustable arm rotates up to 270°. Fits over any acme thread extension pole.
*Labeled, 2.5lb, 6pk
45042 Window Sash Painter
Flexible metal tool with paint pad on one end reaches into window sashes, radiators or other hard-to-reach areas for finish painting. Metal handle can be bent out of the way for a better hand position.
*Carded, 1.5lb, 20pk
45965 4-in-1 Screwdriver
reversible-shaft screwdriver securely holds two reversible bits. #1 and #2 Phillips bits and slotted bits in 3/16" and 1/4" are stored in handle when not in use. Ball spring lock holds bits securely. Hidden bonus: The back is a two-size nut driver for 1/4" and 5/16" sizes.
*Carded, 2.3lb, 5pk
45200 Window Opener
Stainless steel sawtooth blade saws paint from between frame and sash of windows that are painted shut. Tubular metal handle with plastic handgrip.
*Carded, 1.0lb, 5pk
Paint SpatulasOriginally designed for chemists and printers, these spatulas have many uses for painters and decorators. Spring steel blades, hardened and tempered. Two-piece hardwood han-dles with double-rivet construction.
41010 3/8" Paint Spatula *Carded, 0.5lb, 10pk
41060 5/8" Paint Spatula *Uncarded,1.1lb, 10pk
41110 1" Paint Spatula *Carded,1.3lb, 10pk
Painting and Refinishing Gloves
46750 6 Clear Plastic Disposable Gloves
Use for painting, decorating, gar-dening and household cleaning. No messy cleanup. Large, one size fits all (left or right). 3 pairs per bag.
*Bagged, 1.0lb, 48pk
44240 Refinishing Gloves, 1 pair
reusable neoprene gloves protect hands from chemicals and solvents. Natural rubber with neoprene construction resists most common paint thinners. Use for handling chemicals; painting, decorating, automotive and gar-dening work. Textured fingers for improved grip. One size fits all.
*Bagged, 1.8lb, 10pk
Painters’ Multi-Tools
06985 17-in-1 Painter’s ToolThis rugged multi-tool has an over-mold handle with a thumb stop for safety and a durable, stainless steel blade. This high-quality, light-weight tool can: 1. scrape paint 2. spread compound 3. open cracks in plaster 4. pull nails 5. set nails 6. open cans 7. open bottles 8. clean regular rollers 9. clean mini rollers. 10 /11. 3/4" and 11/16" wrenches to connect a whip hose to a spray gun and an airless hose. The remaining six applications: four different screwdriver bits securely fitted under the Hammer Head® end and a combination scribe/nail set.*Labeled, 0.8lb, 5pk
06993 14-in-1 Pro Project™ Multi-Tool with 4 BitsOne high-quality, handy tool scrapes paint, spreads compound, cleans rollers, removes putty, opens cracks, sets nails, scrapes contours, scrapes convex surfac-es, opens cans and bottles and pulls nails; flat end opens paint can lids. Plus four different screwdriver bits are securely stored in a pullout drawer in the handle and insert into the handle end for quick, easy use. 3" stiff scraping blade. U.S. Patent #5956799 and #6726868.*Labeled, 5pk
06920 Pro Project™ 10-in-1 Multi-Tool with 4 Screw BitsCarry 1 tool for many jobs. Scrape paint, spread compound, clean roll-ers, remove putty, open cracks, set popped nails with Hammer Head® end. Plus, 4 different screwdriver bits are securely stored in a pull-out drawer in the handle and insert into the handle end for quick, easy use. 2-1/2" stiff scraping blade; flat end opens paint can lids.*Labeled, 1.1lb, 4pk
06988 8-in-1 Pro Stainless™ Multi-ToolHeavy-duty multi-tool with 3" stiff stainless steel scraper blade. also includes: putty-remover; spreader; half round cutout cleans paint roll-ers; sharp point opens cracks for patching; die cast metal Hammer Head® end sets drywall nails; nail puller; flat end opens paint can lids. Guaranteed forever.
*Labeled, 0.8lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
hydetools.com • 800-872-4933
Do it the hard way, or the HYDE® way.
get the job done with one tool, not 14, with a HYDE® 14-in-1 Multi-tool. scrapes, patches, pulls, opens, closes, screws and unscrews just about anything on your to-do list.
FIXING STUFF
Merchandiser#06989
Tool #06993
33
Painters’ Multi-Tools
06985 17-in-1 Painter’s ToolThis rugged multi-tool has an over-mold handle with a thumb stop for safety and a durable, stainless steel blade. This high-quality, light-weight tool can: 1. scrape paint 2. spread compound 3. open cracks in plaster 4. pull nails 5. set nails 6. open cans 7. open bottles 8. clean regular rollers 9. clean mini rollers. 10 /11. 3/4" and 11/16" wrenches to connect a whip hose to a spray gun and an airless hose. The remaining six applications: four different screwdriver bits securely fitted under the Hammer Head® end and a combination scribe/nail set.*Labeled, 0.8lb, 5pk
06993 14-in-1 Pro Project™ Multi-Tool with 4 BitsOne high-quality, handy tool scrapes paint, spreads compound, cleans rollers, removes putty, opens cracks, sets nails, scrapes contours, scrapes convex surfac-es, opens cans and bottles and pulls nails; flat end opens paint can lids. Plus four different screwdriver bits are securely stored in a pullout drawer in the handle and insert into the handle end for quick, easy use. 3" stiff scraping blade. U.S. Patent #5956799 and #6726868.*Labeled, 5pk
06920 Pro Project™ 10-in-1 Multi-Tool with 4 Screw BitsCarry 1 tool for many jobs. Scrape paint, spread compound, clean roll-ers, remove putty, open cracks, set popped nails with Hammer Head® end. Plus, 4 different screwdriver bits are securely stored in a pull-out drawer in the handle and insert into the handle end for quick, easy use. 2-1/2" stiff scraping blade; flat end opens paint can lids.*Labeled, 1.1lb, 4pk
06988 8-in-1 Pro Stainless™ Multi-ToolHeavy-duty multi-tool with 3" stiff stainless steel scraper blade. Also includes: putty-remover; spreader; half round cutout cleans paint roll-ers; sharp point opens cracks for patching; die cast metal Hammer Head® end sets drywall nails; nail puller; flat end opens paint can lids. Guaranteed forever.
*Labeled, 0.8lb, 5pk*Retailer Pack Information
hydetools.com • 800-872-4933
Do it the hard way, or the HYDE® way.
Get the job done with one tool, not 14, with a HYDE® 14-in-1 Multi-tool. Scrapes, patches, pulls, opens, closes, screws and unscrews just about anything on your to-do list.
FIXING STUFF
Merchandiser#06989
Tool #06993
34
WALL REPAIR TOOLSWet & Set® Wall and Ceiling Repair
There simply is no faster, more professional way to repair a hole or crack in drywall, plaster, stucco or even wood than with this fabric patch that hardens into a perma-nent patch within minutes. Cut it to size with scissors. Then, just dip it in water and spread it over the damaged area. Stains, holes, cracks and crumbling damage disappear within seconds, replaced by a hard, permanent patch that’s ready for a finish coat within 20-30 minutes. Perfect for flat, curved or uneven surfaces. WET & SET® forms a strong polymer adhesion that won’t peel or delaminate like some patch-ing materials do. In most cases, one coat of patching compound is all it takes — no two-day wait to finish up the job. Available in single flat sheets or economical 3-yard contractor rolls.
09910 Wet & Set®
Repair Patch 5" x 15" Sheet*Bagged, 3.0lb, 30pk
09911 Wet & Set®
Repair Patch 5" x 3-yard Contractor Roll*Boxed, 7.0lb, 12pk
Self-Adhesive Wall Patches with Aluminum BackingPatch walls and ceilings. Self-adhe-sive fiberglass mesh eliminates the need for pre-plastering. Perforated aluminum plate covers without ad-ditional backing. Works with drywall, plaster, wood and other materials. Will not rust or bleedthrough.
09898 4" x 4" Self-Adhesive Wall Patch*Carded, 0.5lb, 10pk
09903 4" x 4" Self-Adhesive Wall Patches 50 pack*Carton, 2.5lb, 50pk
09899 6" x 6" Self-Adhesive Wall Patch*Carded, 1.0lb, 10pk
09904 6" x 6" Self-Adhesive Wall Patches 50 pack*Carton, 5.0lb, 50pk
09007 8" x 8" Self-Adhesive Wall Patch*Carded, 1.5lb, 10pk
09008 4" x 4", 6" x 6", 8" x 8" Self-Adhesive Wall Patches 3 pack*Carded, 3.6lb, 25pk
Do it the HYDE® way at hydetools.com
Also See Joint and Corner Tape; Page 42
• Amazingly Fast & Easy• Sets in 15 Minutes• Repair & Repaint
Same Day
Wet & Set®
Wall Repair Patch
Cut
Wet
Apply
hydetools.com • 800-872-4933
3534
WALL REPAIR TOOLSWet & Set® Wall and Ceiling Repair
There simply is no faster, more professional way to repair a hole or crack in drywall, plaster, stucco or even wood than with this fabric patch that hardens into a perma-nent patch within minutes. Cut it to size with scissors. Then, just dip it in water and spread it over the damaged area. Stains, holes, cracks and crumbling damage disappear within seconds, replaced by a hard, permanent patch that’s ready for a finish coat within 20-30 minutes. Perfect for flat, curved or uneven surfaces. WET & SET® forms a strong polymer adhesion that won’t peel or delaminate like some patch-ing materials do. in most cases, one coat of patching compound is all it takes — no two-day wait to finish up the job. available in single flat sheets or economical 3-yard contractor rolls.
09910 Wet & Set®
Repair Patch 5" x 15" Sheet*Bagged, 3.0lb, 30pk
09911 Wet & Set®
Repair Patch 5" x 3-yard Contractor Roll*Boxed, 7.0lb, 12pk
Self-Adhesive Wall Patches with Aluminum BackingPatch walls and ceilings. Self-adhe-sive fiberglass mesh eliminates the need for pre-plastering. Perforated aluminum plate covers without ad-ditional backing. Works with drywall, plaster, wood and other materials. Will not rust or bleedthrough.
09898 4" x 4" Self-Adhesive Wall Patch*Carded, 0.5lb, 10pk
09903 4" x 4" Self-Adhesive Wall Patches 50 pack*Carton, 2.5lb, 50pk
09899 6" x 6" Self-Adhesive Wall Patch*Carded, 1.0lb, 10pk
09904 6" x 6" Self-Adhesive Wall Patches 50 pack*Carton, 5.0lb, 50pk
09007 8" x 8" Self-Adhesive Wall Patch*Carded, 1.5lb, 10pk
09008 4" x 4", 6" x 6", 8" x 8" Self-Adhesive Wall Patches 3 pack*Carded, 3.6lb, 25pk
Bear Claw™ Drywall Clips
These simple clips are the fast-est, easiest way to repair any size holes in drywall and plaster without cutting back to the studs. Especially helpful in reusing cutout portion of drywall after accessing wall interiors for plumbing or electrical repairs. No tools required. One-hour fire rated. Two sizes for use with 1/2" or 5/8" drywall. U.S. Patents #6209277, #6088986, #D4427509.
09037 1/2" Bear Claw™ Drywall Repair Clips 8 Pack*Carded, 1.9lb, 20pk
09038 1/2" Bear Claw™ Drywall Repair Clips 50 Pack*Clam pack, 7.0lb, 20pk
09042 5/8" Bear Claw™ Drywall Repair Clips 8 Pack*Carded, .8lb, 20pk
09043 5/8" Bear Claw™ Drywall Repair Clips 50 Pack*Clam pack, 0.5lb, 1pk
Wall Repair Tools
45400 Crack Opener
Clean and open cracks for patching. Carbon steel blade, hardwood handle, plated metal ferrule. Tool measures 6" (152mm) overall.
*Carded, 0.7lb, 5pk
45450 Crack Patcher
Plated steel patching tool for drywall, masonry and plaster patching. Two ends: flat bell and pointed.
*Carded, 1.0lb, 10pk
09016 6" MAXXGRIP PRO® Jab Saw
Heavy-duty multi-saw cuts quickly through drywall, wood, Masonite® and plywood. Sharp point pen-etrates drywall without drilling. Double-ground high-carbon steel teeth cut in both directions.
*Carded, 1.3lb, 5pk
05610 Economy Series Combo Pack 1-1/2", 3", 6"
Lightweight polypropylene tools for spreading or scraping compounds. reinforced handles outlast other disposables. Pack includes one each of 1-1/2", 3" and 6" tools.
*Labeled, 2.1lb, 10pk
05615 Economy Series Combo Pack 2", 4", 6"
Lightweight polypropylene tools for spreading or scraping compounds. reinforced handles outlast other disposables. Pack includes one each of 2", 4" and 6" tools.
*Labeled, 3.4lb, 20pk
09510 5-Way Smoothing Tool
Multiuse tool for spreading drywall compound and shaping inside corners; spreading plaster or cement. Three edges: 4", 6" and 10".
*Labeled, 2.1lb, 10pk
Do it the HYDE® way at hydetools.com
Also See Joint and Corner Tape; Page 42
*Retailer Pack Information
• Amazingly Fast & Easy• Sets in 15 Minutes• Repair & Repaint
Same Day
• Fast & Easy Repair for any Size Hole
• No Tools Required
Wet & Set®
Wall Repair Patch
Bear Claw™
Drywall Clips
Cut
Wet
apply
hydetools.com • 800-872-4933hydetools.com • 800-872-4933
3736
DRYWALL TOOLSPro Stainless® Taping Knives
rust-resistant stainless steel taping knives have a lightweight, comfort-able handle offering excellent control for feathering and knock-down texturing. Blades are tapered for running corners faster. Sturdy, soft grip with Hammer Head® end and hang hole for storage.
Stainless Steel Extruded BackNon-rust extruded aluminum backing
09323 8" Pro Stainless™ Taping Knife*Labeled, 3.0lb, 5pk
09333 10" Pro Stainless™ Taping Knife*Labeled, 3.5lb, 5pk
09343 12" Pro Stainless™ Taping Knife*Labeled, 4.0lb, 5pk
09344 14" Pro Stainless™ Taping Knife*Labeled, 5.5lb, 5pk
Stainless Steel Flat BackFlat back of lightweight, non-rust aluminum
09353 8" Pro Stainless™ Taping Knife*Labeled, 2.6lb, 5pk
09363 10" Pro Stainless™ Taping Knife*Labeled, 3.0lb, 5pk
09373 12" Pro Stainless™ Taping Knife*Labeled, 3.4lb, 5pk
09374 14" Pro Stainless™ Taping Knife*Labeled, 5.0lb, 5pk
Pro Hardwood Taping Knives
High-quality taping knives with the lathe-turned hardwood handle preferrd by many pros. rust- resistant stainless steel blades are tapered for running corners. Smooth, sturdy handle is designed for comfort, excellent control and easy cleaning.
Stainless Steel Extruded BackNon-rust extruded aluminum backing
09327 8" Pro Hardwood Taping Knife*Labeled, 3.1lb, 5pk
09337 10" Pro Hardwood Taping Knife*Labeled, 3.5lb, 5pk
09347 12" Pro Hardwood Taping Knife*Labeled, 3.6lb, 5pk
09348 14" Pro Hardwood Taping Knife*Labeled, 4.3lb, 5pk
Stainless Steel Flat BackFlat backing of lightweight, non-rust aluminum
09357 8" Pro Hardwood Taping Knife*Labeled, 2.6lb, 5pk
09367 10" Pro Hardwood Taping Knife*Labeled, 2.8lb, 5pk
09377 12" Pro Hardwood Taping Knife*Labeled, 3.2lb, 5pk
09378 14" Pro Hardwood Taping Knife*Labeled, 3.5lb, 5pk
Value Series™
Lightweight Taping Knives23% lighter than conventional taping knives for daylong drywall joint taping, finishing and patching. also useful as a smoothing tool. One-piece polypropylene handle is textured and contoured. Stainless steel blade with nonrusting aluminum backing.
Stainless Steel Flat Back
09312 8" Value Series™ Taping Knife*Labeled, 2.4lb, 5pk
09313 10" Value Series™ Taping Knife*Labeled, 3.0lb, 5pk
09314 12" Value Series™ Taping Knife*Labeled, 3.5lb, 5pk
Pro Hardwood Taping Knives
Blue Steel Extruded BackNon-rust extruded aluminum backing
09227 8" Pro Hardwood Taping Knife*Labeled, 3.0lb, 5pk
09237 10" Pro Hardwood Taping Knife*Labeled, 3.5lb, 5pk
09247 12" Pro Hardwood Taping Knife*Labeled, 3.8lb, 5pk
09248 14" Pro Hardwood Taping Knife*Labeled, 4.2lb, 5pk
Blue Steel Flat BackFlat backing of lightweight, non-rust aluminum
09257 8" Pro Hardwood Taping Knife*Labeled, 2.5lb, 5pk
09267 8" Pro Hardwood Taping Knife*Labeled, 2.9lb, 5pk
09277
8" Pro Hardwood Taping Knife*Labeled, 3.3lb, 5pk
09278
8" Pro Hardwood Taping Knife*Labeled, 3.4lb, 5pk
Pro Project™
Blue Steel Taping KnivesLightweight, comfortable and flexible, these blue steel taping knives offer excellent control for feathering and knockdown textur-ing. Blades are tapered for running corners faster. Sturdy, soft grip for comfortable, extended use.
Blue Steel Extruded Back
09223 8" Pro Project™ Taping Knife*Labeled, 3.0lb, 5pk
09233 10" Pro Project™ Taping Knife*Labeled, 3.5lb, 5pk
09243 12" Pro Project™ Taping Knife*Labeled, 4.0lb, 5pk
09244 14" Pro Project™ Taping Knife*Labeled, 5.5lb, 5pk
Blue Steel Flat Back
09253 8" Pro Project™ Taping Knife*Labeled, 2.6lb, 5pk
09263 10" Pro Project™ Taping Knife*Labeled, 3.0lb, 5pk
09273 12" Pro Project™ Taping Knife*Labeled, 3.4lb, 5pk
09274 14" Pro Project™ Taping Knife*Labeled, 5.0lb, 5pk
Value Series™ Lightweight Taping Knives
Blue Steel Flat Back
09211 6" Value Series™ Taping Knife*Labeled, 2.3lb, 5pk
09212 8" Value Series™ Taping Knife*Labeled, 2.4lb, 5pk
09213 10" Value Series™ Taping Knife*Labeled, 3.0lb, 5pk
09214 12" Value Series™ Taping Knife*Labeled, 3.5lb, 5pk
09215 14" Value Series™ Taping Knife*Labeled, 4.5lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
Flat Back
Extruded Back
37
Pro Hardwood Taping Knives
Blue Steel Extruded BackNon-rust extruded aluminum backing
09227 8" Pro Hardwood Taping Knife*Labeled, 3.0lb, 5pk
09237 10" Pro Hardwood Taping Knife*Labeled, 3.5lb, 5pk
09247 12" Pro Hardwood Taping Knife*Labeled, 3.8lb, 5pk
09248 14" Pro Hardwood Taping Knife*Labeled, 4.2lb, 5pk
Blue Steel Flat BackFlat backing of lightweight, non-rust aluminum
09257 8" Pro Hardwood Taping Knife*Labeled, 2.5lb, 5pk
09267 10" Pro Hardwood Taping Knife*Labeled, 2.9lb, 5pk
09277
12" Pro Hardwood Taping Knife*Labeled, 3.3lb, 5pk
09278 14" Pro Hardwood Taping Knife*Labeled, 3.4lb, 5pk
Pro Project™
Blue Steel Taping KnivesLightweight, comfortable and flexible, these blue steel taping knives offer excellent control for feathering and knockdown textur-ing. Blades are tapered for running corners faster. Sturdy, soft grip for comfortable, extended use.
Blue Steel Extruded Back
09223 8" Pro Project™ Taping Knife*Labeled, 3.0lb, 5pk
09233 10" Pro Project™ Taping Knife*Labeled, 3.5lb, 5pk
09243 12" Pro Project™ Taping Knife*Labeled, 4.0lb, 5pk
09244 14" Pro Project™ Taping Knife*Labeled, 5.5lb, 5pk
Blue Steel Flat Back
09253 8" Pro Project™ Taping Knife*Labeled, 2.6lb, 5pk
09263 10" Pro Project™ Taping Knife*Labeled, 3.0lb, 5pk
09273 12" Pro Project™ Taping Knife*Labeled, 3.4lb, 5pk
09274 14" Pro Project™ Taping Knife*Labeled, 5.0lb, 5pk
Value Series™ Lightweight Taping Knives
Blue Steel Flat Back
09211 6" Value Series™ Taping Knife*Labeled, 2.3lb, 5pk
09212 8" Value Series™ Taping Knife*Labeled, 2.4lb, 5pk
09213 10" Value Series™ Taping Knife*Labeled, 3.0lb, 5pk
09214 12" Value Series™ Taping Knife*Labeled, 3.5lb, 5pk
09215 14" Value Series™ Taping Knife*Labeled, 4.5lb, 5pk
*Retailer Pack Information
Watch the video
Scan with your smartphone
3938
DRYWALL TOOLS Drywall Finishing Trowels
52-54 HRC High Carbon SteelPro-quality high-carbon steel finish-ing trowel has rockwell hardness tested at 52-54 HrC. Flat blade style, blade measures 12" x 4-1/2". Smooth hardwood handle.
18520 52-54 HRC High Carbon Steel Finishing Trowel*Labeled, 4.5lb, 5pk
High Carbon Steel TrowelsFinishing trowels with contoured ergonomic handles are designed for cement, plaster and drywall finishing. One-piece high-carbon steel blades are hardened, tempered and ground.
09950 11"x4-1/2" Flat Finishing Trowel*Labeled, 4.4lb, 5pk
09960 12"x4" Flat Finishing Trowel*Labeled, 4.0lb, 5pk
18600 14"x4" Finishing Trowel*Labeled, 5.5lb, 5pk
Carbon Steel TrowelsHigh-quality, carbon steel finishing trowels with flat blade and rubber-ized grip.
18550 11"x4-1/2" Carbon Steel Flat Finishing Trowel *Labeled, 4.5lb, 5pk
18555 12"x4" Carbon Steel Flat Finishing Trowel*Labeled, 4.5lb, 5pk
Stainless Steel Drywall Joint Knives
Pro Stainless™
Premium quality joint knives feature a flexible rust-resistant stainless steel blade, double hollow-ground for the perfect flex point, plus a durable Hammer Head® end for resetting popped nails and screws. Superior grip has overmold cushioning for prolonged taping jobs. Guaranteed forever.
06578 4" Flexible Pro Stainless™ Joint Knife with Hammer Head® end*Labeled, 0.9lb, 5pk
06778 5" Flexible Pro Stainless™ Joint Knife with Hammer Head® end*Labeled, 1.0lb, 5pk
06878 6" Flexible Pro Stainless™ Joint Knife with Hammer Head® end*Labeled, 1.1lb, 5pk
06881 8" Flexible Pro Stainless™ Joint Knife with Hammer Head® end*Labeled, 1.7lb, 5pk
06882 10" Flexible Pro Stainless™ Joint Knife with Hammer Head® end*Labeled, 2.3lb, 5pk
Black & Silver® Stainless SteelHighest quality Black & Silver® joint knives feature a full-tang, hollow-ground, rust-resistant, stainless steel blade with desired flex point for applying and smoothing compound and taping joints. Durable nylon handle. Guaranteed forever.
01540 4" Flexible Black & Silver® Stainless Steel Joint Knife*Labeled, 1.0lb, 5pk
01550 4" Flexible Black & Silver® Stainless Steel Joint Knife with Hammer Head® end*Labeled, 1.3lb, 5pk
01740 5" Flexible Black & Silver® Stainless Steel Joint Knife*Labeled, 1.2lb, 5pk
01750 5" Flexible Black & Silver® Stainless Steel Joint Knife with Hammer Head® end*Labeled, 1.4lb, 5pk
01840 6" Flexible Black & Silver® Stainless Steel Joint Knife*Labeled, 1.4lb, 5pk
01850 6" Flexible Black & Silver® Stainless Steel Joint Knife with Hammer Head® end*Labeled, 1.5lb, 5pk
High-Carbon Steel Drywall Joint Knives
Featuring a full-tang, hollow-ground, high-carbon steel blade with desired flex point for applying compound and taping joints. Durable nylon handle. Guaranteed forever.
Black & Silver®
02550 4" Flexible Black & Silver® Joint Knife*Labeled, 1.0lb, 5pk
02570 4" Flexible Black & Silver® Joint Knife with Hammer Head® end*Labeled, 1.4lb, 5pk
02750 5" Flexible Black & Silver® Joint Knife*Labeled, 1.3lb, 5pk
02770 5" Flexible Black & Silver® Joint Knife with Hammer Head® end*Labeled, 1.5lb, 5pk
02850 6" Flexible Black & Silver® Joint Knife*Labeled, 1.4lb, 5pk
02870 6" Flexible Black & Silver® Joint Knife with Hammer Head® end*Labeled, 1.5lb, 5pk
02852 6" SuperFlexx™ Black & Silver® Joint Knife
with extra flexibility for applying, smoothing and feathering.
*Labeled, 1.2lb, 5pk
02872 6" SuperFlexx™ Black & Silver® Joint Knife with Hammer Head® end
with extra flexibility for applying, smoothing and feathering.
*Labeled, 1.5lb, 5pk
02880 10" Flexible Black & Silver® Joint Knife*Labeled, 2.5lb, 5pk
02990 8" Flexible Black & Silver® Joint Knife*Labeled, 2.3lb, 5pk
02995 8" Flexible Black & Silver® Joint Knife with Hammer Head® end*Labeled, 2.3lb, 5pk
02890 10" Flexible Black & Silver® Joint Knife with Hammer Head® end*Labeled, 2.5lb, 5pk
Hardwood HandlePro-quality joint knives with the ideal flex point for spreading compounds. Hollow-ground, high-carbon steel blades, polished and clear coated.
07760 5" Flexible Joint Knife, Hardwood Handle*Labeled, 1.4lb, 5pk
07860 6" Flexible Joint Knife, Hardwood Handle*Labeled, 1.5lb, 5pk
Carbon Steel Drywall Joint Knives
Pro Project™
Straight-ground joint knives with overmold comfort grip and flexible carbon steel blade for applying compound and taping joints. Hammer Head® end for resetting popped nails and screws. Blades are hardened for durability.
06571 4" Flexible Pro Project™ Joint Knife with Hammer Head® end*Labeled, 0.9lb, 5pk
06771 5" Flexible Pro Project™ Joint Knife with Hammer Head® end*Labeled, 1.0lb, 5pk
06872 6" Flexible Pro Project™ Joint Knife with Hammer Head® end*Labeled, 1.1lb, 5pk
Value Series™
Economical joint knives with ergonomic handle shaped for comfort. Flexible carbon steel blades are hardened for durability.
04701 4-1/2" Flexible Value Series™ Joint Knife*Labeled, 0.9lb, 5pk
04851 6" Flexible Value Series™ Joint Knife*Labeled, 1.0lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
3938
DRYWALL TOOLS Drywall Finishing Trowels
52-54 HRC High Carbon SteelPro-quality high-carbon steel finish-ing trowel has rockwell hardness tested at 52-54 HrC. Flat blade style, blade measures 12" x 4-1/2". Smooth hardwood handle.
18520 52-54 HRC High Carbon Steel Finishing Trowel*Labeled, 4.5lb, 5pk
High Carbon Steel TrowelsFinishing trowels with contoured ergonomic handles are designed for cement, plaster and drywall finishing. One-piece high-carbon steel blades are hardened, tempered and ground.
09950 11"x4-1/2" Flat Finishing Trowel*Labeled, 4.4lb, 5pk
09960 12"x4" Flat Finishing Trowel*Labeled, 4.0lb, 5pk
18600 14"x4" Finishing Trowel*Labeled, 5.5lb, 5pk
Carbon Steel TrowelsHigh-quality, carbon steel finishing trowels with flat blade and rubber-ized grip.
18550 11"x4-1/2" Carbon Steel Flat Finishing Trowel *Labeled, 4.5lb, 5pk
18555 12"x4" Carbon Steel Flat Finishing Trowel*Labeled, 4.5lb, 5pk
Stainless Steel Drywall Joint Knives
Pro Stainless™
Premium quality joint knives feature a flexible rust-resistant stainless steel blade, double hollow-ground for the perfect flex point, plus a durable Hammer Head® end for resetting popped nails and screws. Superior grip has overmold cushioning for prolonged taping jobs. Guaranteed forever.
06578 4" Flexible Pro Stainless™ Joint Knife with Hammer Head® end*Labeled, 0.9lb, 5pk
06778 5" Flexible Pro Stainless™ Joint Knife with Hammer Head® end*Labeled, 1.0lb, 5pk
06878 6" Flexible Pro Stainless™ Joint Knife with Hammer Head® end*Labeled, 1.1lb, 5pk
06881 8" Flexible Pro Stainless™ Joint Knife with Hammer Head® end*Labeled, 1.7lb, 5pk
06882 10" Flexible Pro Stainless™ Joint Knife with Hammer Head® end*Labeled, 2.3lb, 5pk
Black & Silver® Stainless SteelHighest quality Black & Silver® joint knives feature a full-tang, hollow-ground, rust-resistant, stainless steel blade with desired flex point for applying and smoothing compound and taping joints. Durable nylon handle. Guaranteed forever.
01540 4" Flexible Black & Silver® Stainless Steel Joint Knife*Labeled, 1.0lb, 5pk
01550 4" Flexible Black & Silver® Stainless Steel Joint Knife with Hammer Head® end*Labeled, 1.3lb, 5pk
01740 5" Flexible Black & Silver® Stainless Steel Joint Knife*Labeled, 1.2lb, 5pk
01750 5" Flexible Black & Silver® Stainless Steel Joint Knife with Hammer Head® end*Labeled, 1.4lb, 5pk
01840 6" Flexible Black & Silver® Stainless Steel Joint Knife*Labeled, 1.4lb, 5pk
01850 6" Flexible Black & Silver® Stainless Steel Joint Knife with Hammer Head® end*Labeled, 1.5lb, 5pk
High-Carbon Steel Drywall Joint Knives
Featuring a full-tang, hollow-ground, high-carbon steel blade with desired flex point for applying compound and taping joints. Durable nylon handle. Guaranteed forever.
Black & Silver®
02550 4" Flexible Black & Silver® Joint Knife*Labeled, 1.0lb, 5pk
02570 4" Flexible Black & Silver® Joint Knife with Hammer Head® end*Labeled, 1.4lb, 5pk
02750 5" Flexible Black & Silver® Joint Knife*Labeled, 1.3lb, 5pk
02770 5" Flexible Black & Silver® Joint Knife with Hammer Head® end*Labeled, 1.5lb, 5pk
02850 6" Flexible Black & Silver® Joint Knife*Labeled, 1.4lb, 5pk
02870 6" Flexible Black & Silver® Joint Knife with Hammer Head® end*Labeled, 1.5lb, 5pk
02852 6" SuperFlexx™ Black & Silver® Joint Knife
with extra flexibility for applying, smoothing and feathering.
*Labeled, 1.2lb, 5pk
02872 6" SuperFlexx™ Black & Silver® Joint Knife with Hammer Head® end
with extra flexibility for applying, smoothing and feathering.
*Labeled, 1.5lb, 5pk
02880 10" Flexible Black & Silver® Joint Knife*Labeled, 2.5lb, 5pk
02990 8" Flexible Black & Silver® Joint Knife*Labeled, 2.3lb, 5pk
02995 8" Flexible Black & Silver® Joint Knife with Hammer Head® end*Labeled, 2.3lb, 5pk
02890 10" Flexible Black & Silver® Joint Knife with Hammer Head® end*Labeled, 2.5lb, 5pk
Hardwood HandlePro-quality joint knives with the ideal flex point for spreading compounds. Hollow-ground, high-carbon steel blades, polished and clear coated.
07760 5" Flexible Joint Knife, Hardwood Handle*Labeled, 1.4lb, 5pk
07860 6" Flexible Joint Knife, Hardwood Handle*Labeled, 1.5lb, 5pk
Carbon Steel Drywall Joint Knives
Pro Project™
Straight-ground joint knives with overmold comfort grip and flexible carbon steel blade for applying compound and taping joints. Hammer Head® end for resetting popped nails and screws. Blades are hardened for durability.
06571 4" Flexible Pro Project™ Joint Knife with Hammer Head® end*Labeled, 0.9lb, 5pk
06771 5" Flexible Pro Project™ Joint Knife with Hammer Head® end*Labeled, 1.0lb, 5pk
06872 6" Flexible Pro Project™ Joint Knife with Hammer Head® end*Labeled, 1.1lb, 5pk
Value Series™
Economical joint knives with ergonomic handle shaped for comfort. Flexible carbon steel blades are hardened for durability.
04701 4-1/2" Flexible Value Series™ Joint Knife*Labeled, 0.9lb, 5pk
04851 6" Flexible Value Series™ Joint Knife*Labeled, 1.0lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
4140
DRYWALL TOOLSEconomy Series Drywall Joint Knives
Lightweight polypropylene tools for spreading or scraping compounds. reinforced handles outlast other disposables.
05540 4" Economy Series Spreading Tool*Labeled, 1.2lb, 20pk
05550 6" Economy Series Spreading Tool*Labeled, 1.6lb, 20pk
05570 8" Economy Series Spreading Tool*Labeled, 1.1lb, 10pk
05615 Economy Series Combo Pack 2", 4", 6"
includes one each of 2", 4" and 6" tools.
*Labeled, 3.4lb, 20pk
Corner Tools
For creating smooth, defined corner joints during drywall taping and patching. Extra-wide 4" flexible stainless steel blades with a 103° angle flex tightly into 90° inside corners.
Inside Corner ToolsLightweight polypropylene drywall finishing tool for creating smooth inside corners.
09410 MAXXGRIP® Stainless Steel Inside Corner Tool
with lightweight, offset handle with nonslip grip.
*Labeled, 3.4lb, 5pk
09411 Stainless Steel Inside Corner Tool
with traditional hardwood handle.
*Labeled, 2.2lb, 5pk
05560 2-1/2" Economy Series Inside Corner Tool
Lightweight polypropylene drywall finishing tool for creating smooth inside corners.
*Labeled, 1.4lb, 20pk
09158 Inside Corner Wipe-Down Tool
For drywall taping and patching. Lightweight 6-1/2" rubber flexes to fit inside angles other than 90°. Creates smooth, consistent corners. Use hand-held or slip- fit onto 1"-diameter poles. Easy to clean.
*Labeled, 5.0lb, 12pk
09510 5-Way Smoothing Tool
Multiuse smoothing tool for spread-ing drywall compound and shaping inside corners; spreading plaster or cement; smoothing and trimming wallcovering and shielding edges while painting. Three different-size edges: 4", 6" and 10".
*Labeled, 2.1lb, 10pk
Outside Corner ToolFor creating smooth, defined outside corner joints during drywall taping and patching. Flexible stainless steel blades with 83° angle flex tightly around 90° corners.
09425 MAXXGRIP® Stainless Steel Outside Corner Tool
with extra-wide 4" blades and lightweight, offset handle with nonslip grip.
*Labeled, 3.5lb, 5pk
Pointing Knives
02700 3-1/2" Black & Silver® Drywall Pointing Knife
Professional-grade pointing knife for taping and finishing inside corners and tight areas. 60° blade angle. 3-1/2" high-carbon steel blade. Full-tang blade. Guaran-teed forever.
*Labeled, 1.1lb, 5pk
02701 6" Black & Silver® Drywall Clipped Pointing Knife
Professional-grade clipped point-ing knife for taping and finishing inside corners and tight areas. 30° blade angle. 6" high-carbon steel blade. Full-tang blade. Guaranteed forever.
*Labeled, 1.1lb, 5pk
Installation Tools
09893 Cornerbead Tool with MalletUse a professional mallet and cornerbead tool to quickly crimp and center outside cornerbead, creating a crisp corner.
*Labeled, 4.5lb, 1pk
09892 Cornerbead Tool*Labeled, 2.4lb, 1pk
09016 6" MAXXGRIP PRO® Jab Saw Heavy-duty multi-saw cuts quickly through drywall, wood, Masonite® and plywood. Sharp point pen-etrates drywall without drilling. Double-ground high-carbon steel teeth cut in both directions (pushing and pulling).
*Carded, 1.3lb, 5pk
09110 Drywall Circle CutterCut round holes up to 16" (406mm) in diameter in drywall material. adjustable pivot point and English/metric calibrations in 1/8" (5mm) graduations. Heavy-duty steel construction with replaceable cutting blade.
*Carded, 3.3lb, 5pk
09034 48" Heavy Duty Fixed T-SquareFlexible, anodized aluminum T-square with attached head for permanent accuracy. Large, easy-to-read numbers. 2"x48" blade, 1-1/2"x22-1/2 offset head. Blade width equals size of standard outlet box.
*Carded, 6.3lb, 2pk
09985 Drywall RaspSmooth rough edges with this convenient pocket-size rasp. also used for finishing soft metals and rough wood surfaces. Measures 6".
*Carded, 2.1lb, 5pk
09986 Drywall Rasp Replacement Bladesreplacement blades for HYDE® #09985 drywall rasp.
*Carded, 0.7lb, 10pk
09068 Professional Drywall Hammer
Designed for the drywall trade. Fully polished, angled head allows nailing close to ceilings and corners. rounded and checkered face indents drywall for finishing. Nail-puller slot. Hickory handle lock-welded and epoxy filled.
*Labeled, 5.5lb, 4pk
09081 Rolling Drywall Lifting Tool
Lift and move drywall sheets into position for nailing. Step-down lifts up to 3". rolls forward 2" with each step. Heavy-duty steel con-struction with ribs for strength.
*Labeled, 13.8lb, 5pk
09983 Mini Drywall Lifting Tool
Pocket-size tool lifts drywall sheet 2" to position for installation. Measures 6".
*Labeled, 4.9lb, 5pk
09086 SuperSoft Knee Pads
Contoured pads to cushion and protect the knee. 2-1/2"-wide neoprene straps with Velcro fasteners for adjustable fit. Pads will not mar surfaces. Washable.
*Bagged, 7.5lb, 6pk
09039 Drywall Screw Adapter Bit (#2-Phillips)
#2 Phillips tip for driving drywall screws. For use with 1/4" or larger variable-speed electric drill. Fits all popular drywall screws. Built-in depth finder draws paper in evenly with screw head. Count-ersets screws for drywall finishing.
*Carded, 0.5lb, 10pk
02996 Black & Silver® Pail Popper® Pail Opener
Heavy-duty pail opener with sharp hook cutter for removing plastic 5-gallon bucket lids and pail tops. Electrocoated 3" scraper/spread-er blade and durable nylon handle with Hammer Head® end. Full-tang blade. Guaranteed forever.
*Labeled, 1.5lb, 5pk
MAXXGRIP PRO® Drywall Hawks
advanced hawk design provides a comfortable soft grip and swivel ring for easy turning. Lightweight aluminum blade is grooved to keep compound from slipping. rounded corners for safety. Open handle designed to fit on staging post.
09073 13" MAXXGRIP PRO® Drywall Hawk *Labeled, 8.0lb, 5pk
09074 10" MAXXGRIP PRO® Drywall Hawk*Labeled, 5.1lb, 5pk
Drywall Tapers
09090 Fast-load Drywall Tape Dispenser
Fast-loading plated steel dispenser holds all paper and fiberglass drywall tape rolls up to 2-1/4"x500'. Hangs from belt. Tape (not included) threads easily through dispensing slot for quick feed and clean tear-off. Lift retaining pin to change rolls.
*Labeled, 6.6lb, 10pk
09077 Soft-Grip Banjo Taper
Lightweight, quick-load taper pre-muds drywall tape for faster installation. Easy-to-fill compound compartment holds 2 quarts. Wing nuts adjust mudflow dam. Large roll compartment holds 41 feet of standard tape. Well balanced for hours of taping. adjustable side strap for right-handed use only.
*Carded, 3.5lb, 1pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
4140
DRYWALL TOOLSEconomy Series Drywall Joint Knives
Lightweight polypropylene tools for spreading or scraping compounds. reinforced handles outlast other disposables.
05540 4" Economy Series Spreading Tool*Labeled, 1.2lb, 20pk
05550 6" Economy Series Spreading Tool*Labeled, 1.6lb, 20pk
05570 8" Economy Series Spreading Tool*Labeled, 1.1lb, 10pk
05615 Economy Series Combo Pack 2", 4", 6"
includes one each of 2", 4" and 6" tools.
*Labeled, 3.4lb, 20pk
Corner Tools
For creating smooth, defined corner joints during drywall taping and patching. Extra-wide 4" flexible stainless steel blades with a 103° angle flex tightly into 90° inside corners.
Inside Corner ToolsLightweight polypropylene drywall finishing tool for creating smooth inside corners.
09410 MAXXGRIP® Stainless Steel Inside Corner Tool
with lightweight, offset handle with nonslip grip.
*Labeled, 3.4lb, 5pk
09411 Stainless Steel Inside Corner Tool
with traditional hardwood handle.
*Labeled, 2.2lb, 5pk
05560 2-1/2" Economy Series Inside Corner Tool
Lightweight polypropylene drywall finishing tool for creating smooth inside corners.
*Labeled, 1.4lb, 20pk
09158 Inside Corner Wipe-Down Tool
For drywall taping and patching. Lightweight 6-1/2" rubber flexes to fit inside angles other than 90°. Creates smooth, consistent corners. Use hand-held or slip- fit onto 1"-diameter poles. Easy to clean.
*Labeled, 5.0lb, 12pk
09510 5-Way Smoothing Tool
Multiuse smoothing tool for spread-ing drywall compound and shaping inside corners; spreading plaster or cement; smoothing and trimming wallcovering and shielding edges while painting. Three different-size edges: 4", 6" and 10".
*Labeled, 2.1lb, 10pk
Outside Corner ToolFor creating smooth, defined outside corner joints during drywall taping and patching. Flexible stainless steel blades with 83° angle flex tightly around 90° corners.
09425 MAXXGRIP® Stainless Steel Outside Corner Tool
with extra-wide 4" blades and lightweight, offset handle with nonslip grip.
*Labeled, 3.5lb, 5pk
Pointing Knives
02700 3-1/2" Black & Silver® Drywall Pointing Knife
Professional-grade pointing knife for taping and finishing inside corners and tight areas. 60° blade angle. 3-1/2" high-carbon steel blade. Full-tang blade. Guaran-teed forever.
*Labeled, 1.1lb, 5pk
02701 6" Black & Silver® Drywall Clipped Pointing Knife
Professional-grade clipped point-ing knife for taping and finishing inside corners and tight areas. 30° blade angle. 6" high-carbon steel blade. Full-tang blade. Guaranteed forever.
*Labeled, 1.1lb, 5pk
Installation Tools
09893 Cornerbead Tool with MalletUse a professional mallet and cornerbead tool to quickly crimp and center outside cornerbead, creating a crisp corner.
*Labeled, 4.5lb, 1pk
09892 Cornerbead Tool*Labeled, 2.4lb, 1pk
09016 6" MAXXGRIP PRO® Jab Saw Heavy-duty multi-saw cuts quickly through drywall, wood, Masonite® and plywood. Sharp point pen-etrates drywall without drilling. Double-ground high-carbon steel teeth cut in both directions (pushing and pulling).
*Carded, 1.3lb, 5pk
09110 Drywall Circle CutterCut round holes up to 16" (406mm) in diameter in drywall material. adjustable pivot point and English/metric calibrations in 1/8" (5mm) graduations. Heavy-duty steel construction with replaceable cutting blade.
*Carded, 3.3lb, 5pk
09034 48" Heavy Duty Fixed T-SquareFlexible, anodized aluminum T-square with attached head for permanent accuracy. Large, easy-to-read numbers. 2"x48" blade, 1-1/2"x22-1/2 offset head. Blade width equals size of standard outlet box.
*Carded, 6.3lb, 2pk
09985 Drywall RaspSmooth rough edges with this convenient pocket-size rasp. also used for finishing soft metals and rough wood surfaces. Measures 6".
*Carded, 2.1lb, 5pk
09986 Drywall Rasp Replacement Bladesreplacement blades for HYDE® #09985 drywall rasp.
*Carded, 0.7lb, 10pk
09068 Professional Drywall Hammer
Designed for the drywall trade. Fully polished, angled head allows nailing close to ceilings and corners. rounded and checkered face indents drywall for finishing. Nail-puller slot. Hickory handle lock-welded and epoxy filled.
*Labeled, 5.5lb, 4pk
09081 Rolling Drywall Lifting Tool
Lift and move drywall sheets into position for nailing. Step-down lifts up to 3". rolls forward 2" with each step. Heavy-duty steel con-struction with ribs for strength.
*Labeled, 13.8lb, 5pk
09983 Mini Drywall Lifting Tool
Pocket-size tool lifts drywall sheet 2" to position for installation. Measures 6".
*Labeled, 4.9lb, 5pk
09086 SuperSoft Knee Pads
Contoured pads to cushion and protect the knee. 2-1/2"-wide neoprene straps with Velcro fasteners for adjustable fit. Pads will not mar surfaces. Washable.
*Bagged, 7.5lb, 6pk
09039 Drywall Screw Adapter Bit (#2-Phillips)
#2 Phillips tip for driving drywall screws. For use with 1/4" or larger variable-speed electric drill. Fits all popular drywall screws. Built-in depth finder draws paper in evenly with screw head. Count-ersets screws for drywall finishing.
*Carded, 0.5lb, 10pk
02996 Black & Silver® Pail Popper® Pail Opener
Heavy-duty pail opener with sharp hook cutter for removing plastic 5-gallon bucket lids and pail tops. Electrocoated 3" scraper/spread-er blade and durable nylon handle with Hammer Head® end. Full-tang blade. Guaranteed forever.
*Labeled, 1.5lb, 5pk
MAXXGRIP PRO® Drywall Hawks
advanced hawk design provides a comfortable soft grip and swivel ring for easy turning. Lightweight aluminum blade is grooved to keep compound from slipping. rounded corners for safety. Open handle designed to fit on staging post.
09073 13" MAXXGRIP PRO® Drywall Hawk *Labeled, 8.0lb, 5pk
09074 10" MAXXGRIP PRO® Drywall Hawk*Labeled, 5.1lb, 5pk
Drywall Tapers
09090 Fast-load Drywall Tape Dispenser
Fast-loading plated steel dispenser holds all paper and fiberglass drywall tape rolls up to 2-1/4"x500'. Hangs from belt. Tape (not included) threads easily through dispensing slot for quick feed and clean tear-off. Lift retaining pin to change rolls.
*Labeled, 6.6lb, 10pk
09077 Soft-Grip Banjo Taper
Lightweight, quick-load taper pre-muds drywall tape for faster installation. Easy-to-fill compound compartment holds 2 quarts. Wing nuts adjust mudflow dam. Large roll compartment holds 41 feet of standard tape. Well balanced for hours of taping. adjustable side strap for right-handed use only.
*Carded, 3.5lb, 1pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
42
DRYWALL TOOLS
Drywall Joint Tape
Reinforced Joint and Corner TapeFlexible 2" paper tape with two plated-steel reinforcing strips for taping inside or outside corner joints. Cut to length with scissors and apply with joint compound to straighten and add strength to any corner. Tape conforms to any angle.
09891 Metal Reinforced Corner Tape 2"x25' Roll*Carded, 6.0lb, 5pk
09003 Metal Reinforced Corner Tape 2"x100' Roll*Carded, 28.8lb, 8pk
Self-Adhesive Fiberglass Joint TapeStrong fiberglass mesh reinforced for taping and patching drywall. Adhesive eliminates need for pre- plastering. For use with quick- setting compound. Will not blister or bubble. Faster and easier than conventional paper.
09062 Self-Adhesive Fiberglass Joint Tape 2"x50' Roll*Boxed, 1.2lb, 5pk
09004 Self-Adhesive Fiberglass Joint Tape 2"x150' Roll*Boxed, 6.5lb, 12pk
09065 Self-Adhesive Fiberglass Joint Tape 1-7/8"x300' Roll*Boxed, 8.0lb, 10pk
09005 Self-Adhesive Fiberglass Joint Tape 2"x500' Roll*Boxed, 14.3lb, 10pk
Do it the HYDE® way at hydetools.com
Do it the hard way, or the HYDE® way.
WET n STICK® Water Activated Joint Tape bonds directly to your drywall for faster, easier taping. Just cut it to size, wet it, and press it into the joint for a permanent bond that will never delaminate like mesh or paper tape. After 20-40 minutes, it’s ready to coat. Creased for corners.
WET n STICK® Water Activated Joint Tape
Taping a wall?
Save a whole dayof drying time.
4342
DRYWALL TOOLS
Drywall Joint Tape
Reinforced Joint and Corner TapeFlexible 2" paper tape with two plated-steel reinforcing strips for taping inside or outside corner joints. Cut to length with scissors and apply with joint compound to straighten and add strength to any corner. Tape conforms to any angle.
09891 Metal Reinforced Corner Tape 2"x25' Roll*Carded, 6.0lb, 5pk
09003 Metal Reinforced Corner Tape 2"x100' Roll*Carded, 28.8lb, 8pk
Self-Adhesive Fiberglass Joint TapeStrong fiberglass mesh reinforced for taping and patching drywall. adhesive eliminates need for pre- plastering. For use with quick- setting compound. Will not blister or bubble. Faster and easier than conventional paper.
09062 Self-Adhesive Fiberglass Joint Tape 2"x50' Roll*Boxed, 1.2lb, 5pk
09004 Self-Adhesive Fiberglass Joint Tape 2"x150' Roll*Boxed, 6.5lb, 12pk
09065 Self-Adhesive Fiberglass Joint Tape 1-7/8"x300' Roll*Boxed, 8.0lb, 10pk
09005 Self-Adhesive Fiberglass Joint Tape 2"x500' Roll*Boxed, 14.3lb, 10pk
09886 Self-Adhesive Perforated Joint Tape 2"x75' Roll
For taping and patching drywall material. Strong perforated paper tape is faster and easier to apply than conventional paper tape. adhesive eliminates need for pre-plastering.
*Boxed, 3.6lb, 5pk
WET n STICK® Water Activated Joint Tape
09064 WET n STICK® Water Activated Joint Tape 2"x75' Roll
This innovative joint tape is fast and easy to apply to walls and corners. Just saturate the tape with water, press it to your surface and reposition it as needed. after 20-40 minutes, the tape is permanently bonded to the wall and ready for coating with joint compound. Since no compound is needed for applying it to the wall, you save a whole day of waiting before finishing the job! WET n STiCK® is creased for easy application in corners, and its permanent bond means it will not peel. aSTM C474, aSTM C475, and i.B.C. compliant. U.S. Patent #6071833.
*Labeled, 14.0lb, 24pk
09069 WET n STICK® Water Activated Joint Tape 2"x250' Roll*Labeled, 19.3lb, 12pk
Joint Compound Mud Pans
09012 12" Stainless Steel Heli-arc Welded Joint Compound Mud Pan
Top-of-the-line stainless steel mud pan with watertight heli- arc-welded seams resists rust and wear for frequent taping and patching work. Sharp, durable edges for wiping blades clean. Measures 4-1/4"x13-3/4" at top, 2-5/8"x 12-1/8" at bottom, 3-1/2" deep.
*Labeled, 7.5lb, 5pk
09014 14" Stainless Steel Heli-arc Welded Joint Compound Mud Pan
Top-of-the-line stainless steel mud pan with watertight heli- arc-welded seams resists rust and wear for frequent taping and patching work. Sharp, durable edges for wiping blades clean. Measures 4-1/4"x 15-3/4" at top, 2-5/8"x14-1/8" at bottom, 3-1/2" deep.
*Labeled, 8.3lb, 5pk
09072 12" Stainless Steel Spot Welded Joint Compound Mud Pan
Stainless steel mud pan with spotwelded seams resists rust and wear for frequent taping and patching work. Sharp, durable edges for wiping blades clean. Measures 4-1/4"x13-3/4" at top, 2-5/8"x 12-1/4" at bottom, 3-1/2" deep.
*Labeled, 12.0lb, 10pk
09071 12" Galvanized Spot Welded Joint Compound Mud Pan
Galvanized steel mud pan with spot-welded seams resists rust and wear for frequent taping and patching work. Sharp, durable edges for wiping blades clean. Measures 4-1/4"x13-3/4" at top, 2-5/8"x 12-1/4" at bottom, 3-1/2" deep.
*Labeled, 13.0lb, 10pk
09075 12" Heavy Duty Metal-Edge Mud Pan
Heavy-duty plastic mud pan with metal edges for wiping blades clean. Measures 4-3/4"x13-3/4" at top, 3"x12" at bottom, 3-1/4" deep.
*Labeled, 3.3lb, 5pk
09060 12" Plastic Joint Compound Mud Pan
Heavy-duty plastic mud pan with molded edges for wiping blades clean. Measures 4-3/4"x13-3/4" at top, 2-5/8"x12-1/2" at bottom, 3-1/4" deep.
*Labeled, 5.5lb, 10pk
Texture Tools
09980 Air Texture Hopper Gun
Spray acoustics, drywall, glitter, waterproofing and other gravity- flow materials. 1-1/2-gallon plastic hopper with die cast metal gun. On/off valve. 3 nozzle sizes. adjustable fluid control knob. Minimum 6-1/2 CFM at 25 PSi.
*Boxed, 5.0lb, 1pk
09880 Texture Brush, Single
Natural hemp fiber bristles produce textured surfaces on ceilings or walls. Hardwood construction with clear protec- tive coating. acme thread fits all standard handles and extension poles.
*Labeled, 4.0lb, 5pk
09885 Texture Brush, Double
Natural hemp fiber bristles produce textured surfaces on ceilings or walls. Hardwood construction with clear protec- tive coating. acme thread fits all standard handles and extension poles.
*Labeled, 9.5lb, 5pk
09997 18" Acrylic Knockdown Knife
Flexible, transparent knockdown knife with angled LExaN® blade. Soft-grip handle is acme-thread-ed for use with an extension pole. Tempered aluminum bridge keeps blade straight. Knockdown reduces drying time for texturing. 18" blade.
*Labeled, 1.7lb, 2pk
09998 24" Acrylic Knockdown Knife
Flexible, transparent knockdown knife with angled LExaN® blade. Soft-grip handle is acme-threaded for use with an extension pole. Tempered aluminum bridge keeps blade straight. Knockdown reduces drying time for texturing. 24" blade.
*Labeled, 3.0lb, 2pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
Do it the hard way, or the HYDE® way.
WEt n stICK® Water activated Joint tape bonds directly to your drywall for faster, easier taping. Just cut it to size, wet it, and press it into the joint for a permanent bond that will never delaminate like mesh or paper tape. after 20-40 minutes, it’s ready to coat. Creased for corners.
WET n STICK® Water Activated Joint Tape
Taping a wall?
Save a whole dayof drying time.
4544
CONCRETE & MASONRY Brick Tools
MAXXGRIP® Brick Pointing TrowelsHigh-lift handle for maximum hand clearance when doing brickwork. Soft grip for comfort and easy cleanup. Forged one-piece blades of hardened, tempered, high-quality carbon steel for extra strength.
18090 10" MAXXGRIP® Philadelphia Style Brick Trowel
Wide Philadelphia-style brick trowel holds more mortar on the blade. 10" blade.
*Labeled, 4.5lb, 5pk
18095 10" MAXXGRIP® London Style Brick Trowel
London-style brick trowel has narrow tip for pointing and round-ed heel that forces mortar forward on the blade. 10" blade.
*Labeled, 4.5lb, 5pk
18100 5-1/2" MAXXGRIP® Philadelphia Style Pointing Trowel
Wide Philadelphia-style brick trowel holds more mortar on the blade. Welded shank. 5-1/2" blade.
*Labeled, 1.7lb, 5pk
18110 7" MAXXGRIP® Philadelphia Style Pointing Trowel
Wide Philadelphia-style brick trowel holds more mortar on the blade. Welded shank. 7" blade.
*Labeled, 2.1lb, 5pk
Margin & Tuck Pointing Trowels
18050 1-1/2"x5" MAXXGRIP® Margin Trowel
Fits easily into mixing buckets and hard-to-reach areas; also good for cleaning off other tools. High carbon steel blade; hardened, tempered and ground. High- lift handle for maximum hand clearance. Soft, comfortable grip. 1-1/2"x5" blade.
*Labeled, 1.3lb, 5pk
18060 2"x5" MAXXGRIP® Margin Trowel
*Fits easily into mixing buck-ets and hard-to-reach areas; also good for cleaning off other tools. High carbon steel blade; hardened, tempered and ground. High-lift handle for maximum hand clearance. Soft, comfortable grip. 2"x5" blade.
*Labeled, 2.0lb, 5pk
18080 Tuck Pointing Trowel
Caulking trowels for repairing brick-work have a highlift handle for maximum hand clearance. High- carbon steel blade is welded to the shank. Soft grip for comfort and easy cleanup. Measures 1/2"x6".
*Labeled, 2.7lb, 5pk
Edgers & JointersHardened and tempered steel blade with rugged, easy-to-clean polypropylene handle.
18040 1/2" MAXXGRIP® Edger
6"x2-7/8" polished steel edger with soft-grip handle and sturdy steel mounting. Curved edges prevent gouging.
*Labeled, 2.5lb, 5pk
18170 3/8"–1/2" Heavy Duty Steel Brick Jointer
For producing smooth concave mortar joints between bricks and concrete blocks. One-piece highcarbon steel jointer measures 10" overall and has offset design for hand clearance. Two polished half round working surfaces with different joint sizes on each end.
*Labeled, 3.0lb, 10pk
Heavy Duty Grout Bag
18400 Professional Grout Bag
Professional-quality seamless plastic grout bag. Molded tip can be cut to the desired opening. Easy to clean. Measures 12"x24".
*Boxed, 1.5lb, 10pk
Concrete Tools
18000 14"x4" Concrete Trowel
For cement, drywall and plaster finishing. High-carbon steel blade; hardened and tempered. Cast aluminum blade mountings fastened with rivets. Smooth wood handle.
*Labeled, 5.5lb, 5pk
18720 20"x24" Concrete Spreader with 54" Pole
Lightweight steel spreader with protective electrocoating. Steel ferrule for handle welded securely in place. Comes with 54" smooth hardwood handle. 4"x2" blade.
*Labeled, 4.5lb, 1pk
Heavy Duty Mud Mixers
Heavy-duty mixers for use with drywall compound, driveway sealer, paint and more in 1- to 5-gallon containers. Welded steel with hexagonal shaft for positive chuck engagement. Electrostatic paint coating for easy cleanup and corrosion resistance.
09105 24" Power-Driven Mixer, Fixed Impellers
Plated steel mixer with two fixed impellers for use with 1/2" or larger low-rpm electric drill. 5"- diameter impellers. Use with drywall compound, concrete, driveway sealer and other materials. 24" overall length.
*Labeled, 3.7lb, 2pk
09114 24" Power-Driven Wet/Dry Mixer
High-performance mixer for use with electric drills. Mix cement, mortar, driveway sealer, drywall compound, concrete, paint, paste, adhesive and more. Nonstick polypropylene blades won’t dam-age buckets. 5"-diameter double impeller, 3/8" plated steel shafts. Great for wet or dry mixing. Easy to clean.
*Carded, 4.8lb, 4pk
09059 28" Power-Driven Mixer for 5 to 55 Gallon Drums
rugged welded steel mixer for use with 1/2" or larger low-rpm electric drill. Mix drywall com-pound, concrete, driveway sealer, paint, coatings and more in 5- to 55-gallon drums. Plated to resist corrosion. 3/8" hexagonal shaft extends 1/2" below impeller to prevent bottoming out and damage to bottom of bucket.
*Labeled, 10.5lb, 5pk
09066 31" Drywall Mud Masher
Mix drywall compound and con-crete, in 5-gallon pails. 6"-square heavy-gauge steel mixing grid securely attached with metal ferrule. Sturdy hardwood handle.
*Labeled, 9.5lb, 5pk
Mudslinger® Power Mixers
Fits easily into mixing buckets and hard-to-reach areas; also good for lifting and repositioning tiles and cleaning compound off other tools.
46540 1-5 Gallon Mudslinger® Power Mixer
1-3/4" diameter to fit through pour spout of 5-gallon containers, with 3/8"x19" hex shaft.
*Labeled, 2.3lb, 4pk
46555 1-5 Gallon Mudslinger® Power Mixer
2-1/4" diameter, with 3/8"x16" hex shaft.
*Labeled, 2.5lb, 4pk
46560 5-Gallon Mudslinger® Power Mixer
3-1/4" diameter, with 3/8"x16" hex shaft.
*Labeled, 2.6lb, 4pk
46565 5-Gallon Mudslinger® Power Mixer
4" diameter, with 1/2"x23-1/2" hex shaft.
*Labeled, 4.3lb, 4pk
Heavy Duty Wire Brushes
46809 Stiff Wire Scrub Brush
Stiff wire carbon steel block scrub brush with 1-1/4" bristles handles big cleaning jobs. Great heavy-duty wire scrubbers. Can be used to attach to poles with acme thread for comfortable floor cleaning. Brush area measures 2-1/8"x6-5/8".
Carded, 5.0lb, 6pk
46837 8" MAXXGRIP PRO® High-Carbon Steel Wire Brush
Sturdy, soft-grip ergonomic handle. Large block design (8"x1-1/4") for large area prep-ping, with a tapered nose for tight access and corners.
*Carded, 3.0lb, 4pk
46838 8" MAXXGRIP PRO® Stainless Steel Wire Brush
Sturdy, soft-grip ergonomic handle. Large block design (8"x1-1/4") for large area prepping, with a tapered nose for tight access and corners. Stainless steel bristles are perfect for tough, wet jobs.
*Carded, 3.0lb, 4pk
46839 9" MAXXGRIP PRO® High-Carbon Steel Wire Brush
Sturdy, soft-grip ergonomic handle. Large block design (9"x2") for large area prepping, with a tapered nose for tight access and corners.
*Carded, 4.1lb, 4pk
46840 6-3/4" MAXXGRIP PRO® High-Carbon Steel Wire Brush
Block-style high-carbon steel brush acme thread for use with any standard extension pole. Prep large flat surface areas by hand or mount on pole (not included) for scrubbing floor or high areas. Bristle block measures 6-3/4”x2-1/2”.
*Carded, 4.8lb, 4pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
45
09114 24" Power-Driven Wet/Dry Mixer
High-performance mixer for use with electric drills. Mix cement, mortar, driveway sealer, drywall compound, concrete, paint, paste, adhesive and more. Nonstick polypropylene blades won’t dam-age buckets. 5"-diameter double impeller, 3/8" plated steel shafts. Great for wet or dry mixing. Easy to clean.
*Carded, 4.8lb, 4pk
09059 28" Power-Driven Mixer for 5 to 55 Gallon Drums
Rugged welded steel mixer for use with 1/2" or larger low-rpm electric drill. Mix drywall com-pound, concrete, driveway sealer, paint, coatings and more in 5- to 55-gallon drums. Plated to resist corrosion. 3/8" hexagonal shaft extends 1/2" below impeller to prevent bottoming out and damage to bottom of bucket.
*Labeled, 10.5lb, 5pk
09066 31" Drywall Mud Masher
Mix drywall compound and con-crete, in 5-gallon pails. 6"-square heavy-gauge steel mixing grid securely attached with metal ferrule. Sturdy hardwood handle.
*Labeled, 9.5lb, 5pk
Mudslinger® Power Mixers
46540 1-5 Gallon Mudslinger® Power Mixer
1-3/4" diameter to fit through pour spout of 5-gallon containers, with 3/8"x19" hex shaft.
*Labeled, 2.3lb, 4pk
46555 1-5 Gallon Mudslinger® Power Mixer
2-1/4" diameter, with 3/8"x16" hex shaft.
*Labeled, 2.5lb, 4pk
46560 5-Gallon Mudslinger® Power Mixer
3-1/4" diameter, with 3/8"x16" hex shaft.
*Labeled, 2.6lb, 4pk
46565 5-Gallon Mudslinger® Power Mixer
4" diameter, with 1/2"x23-1/2" hex shaft.
*Labeled, 4.3lb, 4pk
Heavy Duty Wire Brushes
46809 Stiff Wire Scrub Brush
Stiff wire carbon steel block scrub brush with 1-1/4" bristles handles big cleaning jobs. Great heavy-duty wire scrubbers. Can be used to attach to poles with Acme thread for comfortable floor cleaning. Brush area measures 2-1/8"x6-5/8".
Carded, 5.0lb, 6pk
46837 8" MAXXGRIP PRO® High-Carbon Steel Wire Brush
Sturdy, soft-grip ergonomic handle. Large block design (8"x1-1/4") for large area prep-ping, with a tapered nose for tight access and corners.
*Carded, 3.0lb, 4pk
46838 8" MAXXGRIP PRO® Stainless Steel Wire Brush
Sturdy, soft-grip ergonomic handle. Large block design (8"x1-1/4") for large area prepping, with a tapered nose for tight access and corners. Stainless steel bristles are perfect for tough, wet jobs.
*Carded, 3.0lb, 4pk
46839 9" MAXXGRIP PRO® High-Carbon Steel Wire Brush
Sturdy, soft-grip ergonomic handle. Large block design (9"x2") for large area prepping, with a tapered nose for tight access and corners.
*Carded, 4.1lb, 4pk
46840 6-3/4" MAXXGRIP PRO® High-Carbon Steel Wire Brush
Block-style high-carbon steel brush Acme thread for use with any standard extension pole. Prep large flat surface areas by hand or mount on pole (not included) for scrubbing floor or high areas. Bristle block measures 6-3/4”x2-1/2”.
*Carded, 4.8lb, 4pk
*Retailer Pack Information
4746
TILE & CAULK TOOLS Adhesive Trowels
MAXXGRIP® Adhesive TrowelsMaxxGriP® trowels have a soft-grip handle that is comfortable and easy to clean, with no grooves or pinholes in the handle to catch adhesive. Carbon steel blade is hardened and tempered to hold its shape. Cast aluminum handle spine is riveted to blade for durability.
19032 MAXXGRIP® Adhesive Trowel 3/32"x3/32" V-notch
For wallboard, metal and ceramic tile. 4-1/2"x11" blade.
*Labeled, 4.0lb, 5pk
19062 MAXXGRIP® Adhesive Trowel 1/16"x1/16"x1/16" SQ-notch
For carpet, wall tile, vinyl and vinyl materials. 4-1/2"x11" blade.
*Labeled, 4.0lb, 5pk
Economy Single-Notch Adhesive TrowelsHardened and tempered steel blade with rugged, easy-to-clean poly- propylene handle.
19030 Economy Adhesive Trowel 1/4"x5/32" V-notch
For linoleum and asphalt materials. 4-1/4"x9-1/4" blade.
*Labeled, 6.0lb, 10pk
19050 Economy Adhesive Trowel 1/4"x1/4"x1/4" SQ-notch
For medium floor and wall tile; laminated wood plank flooring. 4-1/4"x9-1/4" blade.
*Labeled, 6.0lb, 10pk
19070 Economy Adhesive Trowel 1/4"x3/8"x1/4" SQ-notch
For large ceramic tile, quarry tile and pavers. 4-1/4"x9-1/4" blade.
*Labeled, 6.0lb, 10pk
19066 13-1/8" Economy Tapered Adhesive Trowel 1/8"x1/16"x1/16" U-notch
Tapered ends with rounded corners fit into confined areas. Used for general flooring. 4-1/2"x13-1/8" blade. 1/8"x1/16"x1/16" U-notch on 2 sides.
*Labeled, 6.4lb, 10pk
Economy Double-Notch Adhesive Trowels
19040 Economy Adhesive Trowel SQ-notch/U-notch
For carpet, wall tile, linoleum, vinyl and vinyl materials. 4-1/4"x9-1/4" blade. Double notch includes 1/16"x1/16"x1/16" square notch on 2 sides and 1/16"x1/32"x1/32" U-notch on 2 sides.
*Labeled, 6.0lb, 10pk
19060 Economy Adhesive Trowel Double U-notch
For linoleum, vinyl and asphalt materials. 4-1/4"x9-1/4" blade. Double U-notch includes 3/32"x3/32"x1/8" on 2 sides and 1/16"x1/32"x1/32" on 2 sides.
*Labeled, 6.0lb, 10pk
19063 Economy Adhesive Trowel U-notch/V-notch
For ceramic tile and flooring. 4-1/4"x9-1/4" blade. Double notch includes 3/32"x3/32"x1/8" U-notch on 2 sides and 1/4"x5/32" V-notch on 2 sides.
*Labeled, 6.0lb, 10pk
19065 Economy Adhesive Trowel V-notch/SQ-notch
For special adhesive applications. 4-1/4"x9-1/4" blade. Double notch includes 3/32"x1/8"x15/32" V-notch on 2 sides and 1/16"x1/16"x1/16" square notch on 2 sides.
*Labeled, 6.0lb, 10pk
19067 13-1/8" Economy Adhesive Trowel Double U-notch
Extra-long steel blade for use with vinyl and vinyl materials. 4-1/2"x13-1/8" blade. Double U-notch includes 1/16"x3/64"x1/16" on 2 sides and 1/16"x1/32"x5/64" on 2 sides.
*Labeled, 6.4lb, 10pk
Economy Offset Double-Notch Adhesive Trowels
19041 10-1/2" Economy Offset Adhesive Trowel Double U-notch
For vinyl and vinyl materials. 5° offset blade fits into corners and along base molding. 4-1/2"x 10-1/2" blade. Double Unotch includes 1/16"x1/16"x1/16" deep on 2 sides. 1/64"x1/16"x1/32" on 2 sides.
*Labeled, 6.2lb, 10pk
19061 10-1/2" Economy Offset Adhesive Trowel Double U-notch
For linoleum and asphalt materials. 5° offset blade fits into corners and along base molding. 4-1/2"x10-1/2" blade. Double U-notch includes 3/32"x3/32"x1/8" on 2 sides and 3/32"x1/32" on 2 sides.
*Labeled, 6.2lb, 10pk
Adhesive Spreaders
Value Series™ 2-Sided SpreadersThese practical carbon steel adhesive spreaders have notches on two sides. Use the 9" side for large flat areas and the 4" edge for reaching into tight spaces and corners. rolled metal handle is easy to grip and handles well.
19080 2-sided Value Series™ Adhesive Spreader 1/4"x1/4"x1/4" SQ-notch*Labeled, 3.8lb, 10pk
19081 2-sided Value Series™ Adhesive Spreader 1/4"x3/8"x1/4" SQ-notch*Labeled, 3.8lb, 10pk
19082 2-sided Value Series™ Adhesive Spreader 1/2"x1/2"x1/2" SQ-notch*Labeled, 3.8lb, 10pk
19083 2-sided Value Series™ Adhesive Spreader 1/4"x3/16" V-notch*Labeled, 3.8lb, 10pk
19084 2-sided Value Series™ Adhesive Spreader 3/16"x5/32" V-notch*Labeled, 3.8lb, 10pk
Plastic Spreaders
05532 3" Plastic Adhesive Spreader 3/16"x5/32" V-notch
3" plastic economy spreader for wallboard, metal and ceramic tile.
*Labeled, 1.1lb, 20pk
05534 3" Plastic Adhesive Spreader 1/16"x1/16"x1/16" SQ-notch
3" plastic economy spreader for rubber and plastic materials.
*Labeled, 1.1lb, 20pk
Value Series™ Adhesive Spreaders
04124 3" Value Series™ Adhesive Spreader 1/4"x5/32" V-notch
For wallboard, metal and ceramic tile. Useful for spreading adhesive into tight places. 3" high-carbon steel blade securely fastened to polypropylene handle. Large hang loop to store.
*Labeled, 0.8lb 5pk
04126 3" Value Series™ Adhesive Spreader 1/16"x3/32"x1/16" SQ-notch
For wallboard, metal and ceramic tile. Useful for spreading adhesive into tight places. 3" high-carbon steel blade securely fastened to polypropylene handle. Large hang loop to store.
*Labeled, .6lb 5pk
19090 Metal Adhesive Spreader 3/32"x3/32"x1/8" U-notch
For linoleum and asphalt materials. rigid cold-rolled steel spreader is shaped to fit into 1-gallon can.
*Labeled, 3.8lb, 25pk
19100 Metal Adhesive Spreader 1/16"x1/16"x1/16" SQ-notch
For rubber and plastic materials. rigid cold-rolled steel spreader is shaped to fit into 1-gallon can.
*Labeled, 3.0lb, 25pk
19110 Metal Adhesive Spreader 3/16"x5/32" V-notch
For wallboard, metal and ceramic tile. rigid cold-rolled steel spreader is shaped to fit into 1-gallon can.
*Labeled, 3.0lb, 25pk
19120 Metal Adhesive Spreader 1/16"x1/32"x1/32" SQ-notch
For vinyl and vinyl materials. rigid cold-rolled steel spreader is shaped to fit into 1-gallon can.
*Labeled, 3.0lb, 25pk
Tile Tools Installation and Repair
19400 Ceramic Tile Carbide Nipping Tool
Wide bit for shaping tile. Carbide cutting edge cuts tile up to 1/2" thick. Balanced forged steel construction. 5/8"-wide offset jaws open with return spring. Measures 8" overall.
*Carded, 5.0lb, 5pk
19410 Ceramic Tile Carbide Cutter
Cuts ceramic tile, glass and mirrors. replaceable carbide cut-ting wheel for straight or curved cuts. Built-in breaker bar assures perfect cut. Cushion grips. Tool measures 8-1/2" overall.
*Carded, 3.0lb, 5pk
19420 Carbide Grit Rod Saw Blade
Cuts ceramics, glass, plastic, steel, fiberglass, cast iron, brick, concrete and marble. Use in 10" standard hacksaw frame. Cuts on forward and reverse strokes. Contour cutting.
*Carded, 0.5lb, 10pk
19408 Heavy Duty Carbide Cutter plus 3 Blades
Score cement board, drywall, fiberglass roofing, flooring and laminate materials. Make chisel cuts in all types of masonry back-ing panels. Cement board cutting tool for Durock and Wonderboard. 3 tungsten carbide cutting edges.
*Carded, 1.5lb, 5pk
46807 Nylon Grout Brush
Small grout brush with 5/8" flexible nylon bristles. Good size to get between tiles. Soft nylon bristles for areas where scratching of soft materials or coatings is an issue. Brush area measures 5/8"x2-1/4". Overmold handle.
*Carded, 2.5lb, 6pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
4746
TILE & CAULK TOOLS Adhesive Trowels
MAXXGRIP® Adhesive TrowelsMaxxGriP® trowels have a soft-grip handle that is comfortable and easy to clean, with no grooves or pinholes in the handle to catch adhesive. Carbon steel blade is hardened and tempered to hold its shape. Cast aluminum handle spine is riveted to blade for durability.
19032 MAXXGRIP® Adhesive Trowel 3/32"x3/32" V-notch
For wallboard, metal and ceramic tile. 4-1/2"x11" blade.
*Labeled, 4.0lb, 5pk
19062 MAXXGRIP® Adhesive Trowel 1/16"x1/16"x1/16" SQ-notch
For carpet, wall tile, vinyl and vinyl materials. 4-1/2"x11" blade.
*Labeled, 4.0lb, 5pk
Economy Single-Notch Adhesive TrowelsHardened and tempered steel blade with rugged, easy-to-clean poly- propylene handle.
19030 Economy Adhesive Trowel 1/4"x5/32" V-notch
For linoleum and asphalt materials. 4-1/4"x9-1/4" blade.
*Labeled, 6.0lb, 10pk
19050 Economy Adhesive Trowel 1/4"x1/4"x1/4" SQ-notch
For medium floor and wall tile; laminated wood plank flooring. 4-1/4"x9-1/4" blade.
*Labeled, 6.0lb, 10pk
19070 Economy Adhesive Trowel 1/4"x3/8"x1/4" SQ-notch
For large ceramic tile, quarry tile and pavers. 4-1/4"x9-1/4" blade.
*Labeled, 6.0lb, 10pk
19066 13-1/8" Economy Tapered Adhesive Trowel 1/8"x1/16"x1/16" U-notch
Tapered ends with rounded corners fit into confined areas. Used for general flooring. 4-1/2"x13-1/8" blade. 1/8"x1/16"x1/16" U-notch on 2 sides.
*Labeled, 6.4lb, 10pk
Economy Double-Notch Adhesive Trowels
19040 Economy Adhesive Trowel SQ-notch/U-notch
For carpet, wall tile, linoleum, vinyl and vinyl materials. 4-1/4"x9-1/4" blade. Double notch includes 1/16"x1/16"x1/16" square notch on 2 sides and 1/16"x1/32"x1/32" U-notch on 2 sides.
*Labeled, 6.0lb, 10pk
19060 Economy Adhesive Trowel Double U-notch
For linoleum, vinyl and asphalt materials. 4-1/4"x9-1/4" blade. Double U-notch includes 3/32"x3/32"x1/8" on 2 sides and 1/16"x1/32"x1/32" on 2 sides.
*Labeled, 6.0lb, 10pk
19063 Economy Adhesive Trowel U-notch/V-notch
For ceramic tile and flooring. 4-1/4"x9-1/4" blade. Double notch includes 3/32"x3/32"x1/8" U-notch on 2 sides and 1/4"x5/32" V-notch on 2 sides.
*Labeled, 6.0lb, 10pk
19065 Economy Adhesive Trowel V-notch/SQ-notch
For special adhesive applications. 4-1/4"x9-1/4" blade. Double notch includes 3/32"x1/8"x15/32" V-notch on 2 sides and 1/16"x1/16"x1/16" square notch on 2 sides.
*Labeled, 6.0lb, 10pk
19067 13-1/8" Economy Adhesive Trowel Double U-notch
Extra-long steel blade for use with vinyl and vinyl materials. 4-1/2"x13-1/8" blade. Double U-notch includes 1/16"x3/64"x1/16" on 2 sides and 1/16"x1/32"x5/64" on 2 sides.
*Labeled, 6.4lb, 10pk
Economy Offset Double-Notch Adhesive Trowels
19041 10-1/2" Economy Offset Adhesive Trowel Double U-notch
For vinyl and vinyl materials. 5° offset blade fits into corners and along base molding. 4-1/2"x 10-1/2" blade. Double Unotch includes 1/16"x1/16"x1/16" deep on 2 sides. 1/64"x1/16"x1/32" on 2 sides.
*Labeled, 6.2lb, 10pk
19061 10-1/2" Economy Offset Adhesive Trowel Double U-notch
For linoleum and asphalt materials. 5° offset blade fits into corners and along base molding. 4-1/2"x10-1/2" blade. Double U-notch includes 3/32"x3/32"x1/8" on 2 sides and 3/32"x1/32" on 2 sides.
*Labeled, 6.2lb, 10pk
Adhesive Spreaders
Value Series™ 2-Sided SpreadersThese practical carbon steel adhesive spreaders have notches on two sides. Use the 9" side for large flat areas and the 4" edge for reaching into tight spaces and corners. rolled metal handle is easy to grip and handles well.
19080 2-sided Value Series™ Adhesive Spreader 1/4"x1/4"x1/4" SQ-notch*Labeled, 3.8lb, 10pk
19081 2-sided Value Series™ Adhesive Spreader 1/4"x3/8"x1/4" SQ-notch*Labeled, 3.8lb, 10pk
19082 2-sided Value Series™ Adhesive Spreader 1/2"x1/2"x1/2" SQ-notch*Labeled, 3.8lb, 10pk
19083 2-sided Value Series™ Adhesive Spreader 1/4"x3/16" V-notch*Labeled, 3.8lb, 10pk
19084 2-sided Value Series™ Adhesive Spreader 3/16"x5/32" V-notch*Labeled, 3.8lb, 10pk
Plastic Spreaders
05532 3" Plastic Adhesive Spreader 3/16"x5/32" V-notch
3" plastic economy spreader for wallboard, metal and ceramic tile.
*Labeled, 1.1lb, 20pk
05534 3" Plastic Adhesive Spreader 1/16"x1/16"x1/16" SQ-notch
3" plastic economy spreader for rubber and plastic materials.
*Labeled, 1.1lb, 20pk
Value Series™ Adhesive Spreaders
04124 3" Value Series™ Adhesive Spreader 1/4"x5/32" V-notch
For wallboard, metal and ceramic tile. Useful for spreading adhesive into tight places. 3" high-carbon steel blade securely fastened to polypropylene handle. Large hang loop to store.
*Labeled, 0.8lb 5pk
04126 3" Value Series™ Adhesive Spreader 1/16"x3/32"x1/16" SQ-notch
For wallboard, metal and ceramic tile. Useful for spreading adhesive into tight places. 3" high-carbon steel blade securely fastened to polypropylene handle. Large hang loop to store.
*Labeled, .6lb 5pk
19090 Metal Adhesive Spreader 3/32"x3/32"x1/8" U-notch
For linoleum and asphalt materials. rigid cold-rolled steel spreader is shaped to fit into 1-gallon can.
*Labeled, 3.8lb, 25pk
19100 Metal Adhesive Spreader 1/16"x1/16"x1/16" SQ-notch
For rubber and plastic materials. rigid cold-rolled steel spreader is shaped to fit into 1-gallon can.
*Labeled, 3.0lb, 25pk
19110 Metal Adhesive Spreader 3/16"x5/32" V-notch
For wallboard, metal and ceramic tile. rigid cold-rolled steel spreader is shaped to fit into 1-gallon can.
*Labeled, 3.0lb, 25pk
19120 Metal Adhesive Spreader 1/16"x1/32"x1/32" SQ-notch
For vinyl and vinyl materials. rigid cold-rolled steel spreader is shaped to fit into 1-gallon can.
*Labeled, 3.0lb, 25pk
Tile Tools Installation and Repair
19400 Ceramic Tile Carbide Nipping Tool
Wide bit for shaping tile. Carbide cutting edge cuts tile up to 1/2" thick. Balanced forged steel construction. 5/8"-wide offset jaws open with return spring. Measures 8" overall.
*Carded, 5.0lb, 5pk
19410 Ceramic Tile Carbide Cutter
Cuts ceramic tile, glass and mirrors. replaceable carbide cut-ting wheel for straight or curved cuts. Built-in breaker bar assures perfect cut. Cushion grips. Tool measures 8-1/2" overall.
*Carded, 3.0lb, 5pk
19420 Carbide Grit Rod Saw Blade
Cuts ceramics, glass, plastic, steel, fiberglass, cast iron, brick, concrete and marble. Use in 10" standard hacksaw frame. Cuts on forward and reverse strokes. Contour cutting.
*Carded, 0.5lb, 10pk
19408 Heavy Duty Carbide Cutter plus 3 Blades
Score cement board, drywall, fiberglass roofing, flooring and laminate materials. Make chisel cuts in all types of masonry back-ing panels. Cement board cutting tool for Durock and Wonderboard. 3 tungsten carbide cutting edges.
*Carded, 1.5lb, 5pk
46807 Nylon Grout Brush
Small grout brush with 5/8" flexible nylon bristles. Good size to get between tiles. Soft nylon bristles for areas where scratching of soft materials or coatings is an issue. Brush area measures 5/8"x2-1/4". Overmold handle.
*Carded, 2.5lb, 6pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
4948
TILE & CAULK TOOLS
19402 Professional Grout Saw
removes damaged grout from between tiles. Double blade design: Carbide grit blade cuts grout quickly; toothed blade clears cutting debris. Offset blade mount keeps knuckles away from work. High-impact plastic handle. includes 2 blades, 1 of each style.
*Carded, 1.5lb, 5pk
19403 Grout Saw Replacement Blades (2)
replacement blades for HYDE® grout saw #19402. 1 carbide grit blade, 1 toothed blade.
*Carded, 0.3lb, 5pk
18400 Professional Grout Bag
Professional-quality seamless plastic grout bag. Molded tip can be cut to the desired opening. Easy to clean. Measures 12"x24".
*Boxed, 1.5lb, 10pk
Tile SpacersPolypropylene spacers for fast, accurate tile installation and alignment with professional results. Use for even grout lines and tile spacing.
19660 250 Tile Spacers 1/16" thickness*Bagged, 1.0lb, 6pk
19620 250 Tile Spacers 1/8" thickness*Bagged, 2.0lb, 6pk
19640 200 Tile Spacers 3/16" thickness*Bagged, 3.0lb, 6pk
19600 200 Tile Spacers 1/4" thickness*Bagged, 4.5lb, 6pk
Caulk Tools Removal and Application
43600 Caulk-Away PRO™ Tool
removes old caulk quickly and cleanly. 2 sharp blades reach into tight channels and corners to shave caulk clean from tile or window mullions. Powder-coated metal with replaceable metal blades.
*Carded, 1.6lb, 5pk
43605 Caulk-Away PRO™ Replacement Blades
replacement blades for Caulk-away PrO™ #43600
*Carded, 0.1lb, 5pk
43610 Caulk-Rite PRO™ Tool
Lays down a perfect bead of replacement caulk. No messy residue, no edge marks, no contaminating uncured caulk by using your fingers! For use with silicone, latex and acrylic. Wipes clean when done.
*Carded, 1.7lb, 5pk
43615 Caulk-Rite PRO™ Replacement Pads
replacement pads for Caulk-rite PrO™ #43610.
*Carded, 0.4lb, 5pk
43620 Caulk-Away™ Tool
Plastic caulk removal tool reaches into tight channels to shave old caulk clean from tile or window mullions.
*Carded, 0.4lb, 5pk
43630 Caulk-Rite™ Tool
Plastic caulking tool lays down a smooth bead of replacement caulk. For use with silicone, latex and acrylic.
*Carded, 0.4lb, 5pk
43640 Caulk-Away™ & Caulk-Rite™ Combo Pack
Plastic caulk tools remove old caulk from tile or window mullions and lay down a smooth bead of replacement caulk. For use with silicone, latex and acrylic.
*Carded, 0.5lb, 5pk
Heavy Duty Caulk Guns
46484 9"/10oz. Professional Heavy Duty Caulk Gun
ratchet-style compression rod with ladder hook, for use with all 9" cartridges. Use to apply adhesives, caulking compounds and lubricants. Heavy-duty chrome-plated steel frame resists corrosion. Built-in spout cutter, seal puncture tool and contoured trigger.
*Labeled, 7.5lb, 6pk
46482 9"/10oz. Professional Heavy Duty Caulk Gun
Hexagonal compression rod with ladder hook, for use with all 9" cartridges. Use to apply adhesives, caulking compounds and lubricants. Heavy-duty chrome-plated steel frame resists corrosion. Built-in spout cutter, seal puncture tool and quick- release thumb lever.
*Labeled, 9.0lb, 6pk
46435 9"/10oz. Skeleton Frame Hex Rod Caulk Gun
Smooth hex-style compression rod, for use with all 9" cartridges. Use to apply adhesives, caulk-ing compounds and lubricants. Heavy-duty orange powder- coated steel frame resists cor-rosion. Built-in spout cutter, seal puncture tool and quick-release thumb lever.
*Labeled, 15.0lb, 12pk
46310 9"/10oz. StopDrip Caulk Gun
ratchet-style compression rod for use with all 9" cartridges. Use to apply adhesives, caulk-ing compounds and lubricants. Powder-coated steel frame resists corrosion. StopDrip engineering prevents overflow.
*Labeled, 14.0lb, 12pk
46410 9"/10oz. Ratchet Rod Caulk Gun
ratchet-style compression rod for use with all 9" cartridges. Use to apply adhesives, caulk-ing compounds and lubricants. Powder-coated steel frame resists corrosion. Quick-release thumb lever. Homeowner series.
*Labeled, 11.0lb, 12pk
46400 9"/10oz. Smooth Rod Caulk Gun
Smooth-style compression rod for use with all 9" cartridges. Use to apply adhesives, caulk-ing compounds and lubricants. Powder-coated steel frame resists corrosion. Quick-release thumb lever. Homeowner series.
*Labeled, 12.5lb, 12pk
46420 13"/32oz. StopDrip Ratchet Rod Caulk Gun
ratchet-style compression rod with ladder hook, for use with all 13" cartridges. Use to apply adhesives, caulking compounds and lubricants. Powder-coated steel frame resists corrosion. Contoured squeeze trigger, spout cutter, seal puncture tool and StopDrip overflow prevention.
*Labeled, 12.5lb, 6pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
Remove CaulkCaulk that’s been in place for years comes off quickly and cleanly with the unique Caulk-away™ tools from HYDE®. two sharp blades reach into tight channels and corners to shave caulk clean from tile.
Apply CaulkUse the Caulk-rite™ to lay down a perfect bead of replacement caulk. No messy residue, no edge marks, no contaminating uncured caulk by using your fingers! simply hold at a 45º angle and drag along the caulking bead. Excess caulk collects on the inside of the tool and can be reapplied over any gaps in the bead.
Remove and Apply Caulk Like a Pro!
Do it the hard way, or the HYDE® way.
4948
TILE & CAULK TOOLS
19402 Professional Grout Saw
removes damaged grout from between tiles. Double blade design: Carbide grit blade cuts grout quickly; toothed blade clears cutting debris. Offset blade mount keeps knuckles away from work. High-impact plastic handle. includes 2 blades, 1 of each style.
*Carded, 1.5lb, 5pk
19403 Grout Saw Replacement Blades (2)
replacement blades for HYDE® grout saw #19402. 1 carbide grit blade, 1 toothed blade.
*Carded, 0.3lb, 5pk
18400 Professional Grout Bag
Professional-quality seamless plastic grout bag. Molded tip can be cut to the desired opening. Easy to clean. Measures 12"x24".
*Boxed, 1.5lb, 10pk
Tile SpacersPolypropylene spacers for fast, accurate tile installation and alignment with professional results. Use for even grout lines and tile spacing.
19660 250 Tile Spacers 1/16" thickness*Bagged, 1.0lb, 6pk
19620 250 Tile Spacers 1/8" thickness*Bagged, 2.0lb, 6pk
19640 200 Tile Spacers 3/16" thickness*Bagged, 3.0lb, 6pk
19600 200 Tile Spacers 1/4" thickness*Bagged, 4.5lb, 6pk
Caulk Tools Removal and Application
43600 Caulk-Away PRO™ Tool
removes old caulk quickly and cleanly. 2 sharp blades reach into tight channels and corners to shave caulk clean from tile or window mullions. Powder-coated metal with replaceable metal blades.
*Carded, 1.6lb, 5pk
43605 Caulk-Away PRO™ Replacement Blades
replacement blades for Caulk-away PrO™ #43600
*Carded, 0.1lb, 5pk
43610 Caulk-Rite PRO™ Tool
Lays down a perfect bead of replacement caulk. No messy residue, no edge marks, no contaminating uncured caulk by using your fingers! For use with silicone, latex and acrylic. Wipes clean when done.
*Carded, 1.7lb, 5pk
43615 Caulk-Rite PRO™ Replacement Pads
replacement pads for Caulk-rite PrO™ #43610.
*Carded, 0.4lb, 5pk
43620 Caulk-Away™ Tool
Plastic caulk removal tool reaches into tight channels to shave old caulk clean from tile or window mullions.
*Carded, 0.4lb, 5pk
43630 Caulk-Rite™ Tool
Plastic caulking tool lays down a smooth bead of replacement caulk. For use with silicone, latex and acrylic.
*Carded, 0.4lb, 5pk
43640 Caulk-Away™ & Caulk-Rite™ Combo Pack
Plastic caulk tools remove old caulk from tile or window mullions and lay down a smooth bead of replacement caulk. For use with silicone, latex and acrylic.
*Carded, 0.5lb, 5pk
Heavy Duty Caulk Guns
46484 9"/10oz. Professional Heavy Duty Caulk Gun
ratchet-style compression rod with ladder hook, for use with all 9" cartridges. Use to apply adhesives, caulking compounds and lubricants. Heavy-duty chrome-plated steel frame resists corrosion. Built-in spout cutter, seal puncture tool and contoured trigger.
*Labeled, 7.5lb, 6pk
46482 9"/10oz. Professional Heavy Duty Caulk Gun
Hexagonal compression rod with ladder hook, for use with all 9" cartridges. Use to apply adhesives, caulking compounds and lubricants. Heavy-duty chrome-plated steel frame resists corrosion. Built-in spout cutter, seal puncture tool and quick- release thumb lever.
*Labeled, 9.0lb, 6pk
46435 9"/10oz. Skeleton Frame Hex Rod Caulk Gun
Smooth hex-style compression rod, for use with all 9" cartridges. Use to apply adhesives, caulk-ing compounds and lubricants. Heavy-duty orange powder- coated steel frame resists cor-rosion. Built-in spout cutter, seal puncture tool and quick-release thumb lever.
*Labeled, 15.0lb, 12pk
46310 9"/10oz. StopDrip Caulk Gun
ratchet-style compression rod for use with all 9" cartridges. Use to apply adhesives, caulk-ing compounds and lubricants. Powder-coated steel frame resists corrosion. StopDrip engineering prevents overflow.
*Labeled, 14.0lb, 12pk
46410 9"/10oz. Ratchet Rod Caulk Gun
ratchet-style compression rod for use with all 9" cartridges. Use to apply adhesives, caulk-ing compounds and lubricants. Powder-coated steel frame resists corrosion. Quick-release thumb lever. Homeowner series.
*Labeled, 11.0lb, 12pk
46400 9"/10oz. Smooth Rod Caulk Gun
Smooth-style compression rod for use with all 9" cartridges. Use to apply adhesives, caulk-ing compounds and lubricants. Powder-coated steel frame resists corrosion. Quick-release thumb lever. Homeowner series.
*Labeled, 12.5lb, 12pk
46420 13"/32oz. StopDrip Ratchet Rod Caulk Gun
ratchet-style compression rod with ladder hook, for use with all 13" cartridges. Use to apply adhesives, caulking compounds and lubricants. Powder-coated steel frame resists corrosion. Contoured squeeze trigger, spout cutter, seal puncture tool and StopDrip overflow prevention.
*Labeled, 12.5lb, 6pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
Remove CaulkCaulk that’s been in place for years comes off quickly and cleanly with the unique Caulk-away™ tools from HYDE®. two sharp blades reach into tight channels and corners to shave caulk clean from tile.
Apply CaulkUse the Caulk-rite™ to lay down a perfect bead of replacement caulk. No messy residue, no edge marks, no contaminating uncured caulk by using your fingers! simply hold at a 45º angle and drag along the caulking bead. Excess caulk collects on the inside of the tool and can be reapplied over any gaps in the bead.
Remove and Apply Caulk Like a Pro!
Do it the hard way, or the HYDE® way.
5150
FLOORING TOOLS Flooring Knives
20200 2-1/2" Long-Point Flooring KnifeCut floor covering and drywall material. High-carbon cutlery steel blade; hardened, tempered and honed. Hardwood handle.
*Carded, 1.1lb, 5pk
20250 2-1/2" Short-Point Flooring KnifeCut floor covering and drywall material. High-carbon cutlery steel blade; hardened, tempered and honed. Hardwood handle.
*Carded, 1.1lb, 5pk
20350 2-1/2" Long-Point Flooring/Drywall Knife
Cut floor covering and drywall material. High-carbon cutlery steel blade; hardened, tempered and honed. Hardwood handle.
*Carded, 1.1lb, 5pk
20450 2-1/2" Long-Point Vinyl KnifeCut soft- and hard-core vinyl and floor covering. 2-1/2" long-point high-carbon cutlery steel blade; hardened, tempered and honed. Hardwood handle.
*Carded, 1.5lb, 5pk
20550 Black & Silver® Flooring/Roofing KnifeCutting tool for ceilings, drywall, floor covering, roofing. Heavy- duty .072" chrome vanadium steel blade. 5° offset angle for cutting leverage. Hollow ground to reduce binding. Soft-grip handle with finger guard. Guaranteed forever.
*Carded, 1.5lb, 5pk
20600 Black & Silver® Hose Cutter/ All-Purpose Trade KnifeCutting tool for professional trades: automotive, ceilings, drywall, floor covering, roofing and more. Extra heavy-duty .072"-thick 440 series stainless steel blade. 5° offset blade angle for cutting leverage. Serrated blade area. Soft-grip handle.
*Uncarded, 2.0lb, 5pk
20610 3-1/2" Flooring/ Drywall Knife
Cut flooring and drywall material. High-carbon cutlery steel blade is hardened, tempered and honed. Fiber finish hardwood handle.
*Carded, 2.0lb, 10pk
42095 Adjustable Blade Carpet Knife
Cut carpet, upholstery and heavy fabrics. adjustable blade retracts for safety. Offset head for leverage. High-impact plastic. reversible blade with 4 cutting edges. Change blade without tools. 6 blades included.
*Carded, 0.8lb, 5pk
Heavy Duty Floor & Tile Scrapers
12010 3" Heavy Duty Bent Chisel Scraper
Extra-heavy-duty high-carbon steel scraper for use with paint removers. 3" blade bent 20° for easy paint removal. Hardwood handle is milled, contoured and sanded smooth. High-carbon steel blade individually ground, polished, mirror finished and clear coated. Blade and handle permanently joined with brass rivets. Brass-plated hang hole.
*Labeled, 2.0lb, 5pk
12000 3" Heavy Duty Bent Chisel Scraper
Extra-heavy-duty high-carbon steel scraper with 5-1/2" poly- propylene handle, electrocoated for use with paint removers. 3" blade with 20° angle for easy paint removal. Measures 9" overall.
*Labeled, 1.8lb, 5pk
12060 3" Long Handle Bent Chisel Scraper
Extra-heavy-duty high-carbon steel scraper with 8" polypropyl-ene handle, electrocoated for use with paint removers. 3" blade with 20° angle for easy paint removal.
*Labeled, 2.0lb, 5pk
12050 3" Long Handle Chisel Scraper
Extra-heavy-duty high-carbon steel scraper with 8" polypropyl-ene handle, electrocoated for use with paint removers. 3" blade.
*Labeled, 2.0lb, 5pk
12070 3" Bent Chisel Extension Pole Scraper
Extra-heavy-duty high-carbon steel scraper electrocoated for use with paint removers. Use hand-held or with an acme threaded broom handle or ex-tension pole. One-piece polypro-pylene handle resists corrosion. Thumb bolster for increased leverage. 3" blade bent 20° for easier paint removal.
*Labeled, 2.1lb, 5pk
12072 3" Extra Heavy Duty Chisel Extension Pole Scraper
Extra-heavy-duty high-carbon steel scraper electrocoated for use with paint removers. Use hand-held or with an acme threaded broom handle or extension pole. One-piece polypropylene handle resists corrosion. Thumb bolster for increased leverage. 3" blade.
*Labeled, 2.1lb, 5pk
12055 3" Long Handle Brass Chisel Scraper
Brass non-spark blade for scrap-ing delicate surfaces or working in volatile environments. Poly- propylene handle with large hang hole for storage. Measures 11-1/4" overall; 3" blade.
*Labeled, 2.2lb, 5pk
19423 5" Offset Scraper with 48" handle
Two-handed scraper with offset blade for removing paint, wall- paper, floor adhesive, light-duty tile and linoleum. rust-resistant bright plated carbon steel blade is reversible and replaceable (#19453).
*Carded, 13lb, 5pk
19424 5" Offset Wall and Floor Scraper with 12" HandleHeavy-duty wall and floor scraper with offset design that makes it easier to get edge under material. 12" length for working in tight spaces. Cushioned grip with protective hand stop. Die cast metal head holds blade securely. reversible 5" blade.
*Carded, 3.7lb, 4pk
19425 5" Offset Hammer Scraper with 12" HandleHeavy-duty wall and floor scraper with offset design that makes it easier to get edge under material. 12" length for working in tight spaces. Hammer butt end for cracking tiles. Foam on the handle and a rubber striking grip provide hand protection. Die cast head with welded neck will not spin loose during use. reversible 5" blade; can also be resharpened.
*Carded, 3.0lb, 4pk
19453 5" Hammer Scraper BladeHardened carbon steel replace-ment blade for use with HYDE® scraper #19425.
*Carded, 2.5lb, 10pk
19430 4"/6" Hammer Scraper with 18" Handle
Heavy-duty scraper for hand- chiseling wall tile or hammer- chiseling flooring materials. Foam on the handle and a rubber grip provide hand protection. Die cast head with welded neck will not spin loose during use. reversible 4" blade for twice the life; can also be resharpened. 6" blade also available (#19452).
*Carded, 3.6lb, 2pk
19440 4"/6" Hammer Scraper with 48" Handle
Two-handed push-style scraper for chiseling off coatings or floor-ing materials such as tile, lino-leum, paint and roofing materials. Foam on the handle and a rubber striking grip provide hand protec-tion. Die cast head with welded neck will not spin loose during use. reversible 4" blade for twice the life; can also be resharpened. 6" blade also available (#19452).
*Carded, 2pk
19450 4"/6" Hammer Scraper with 54" Handle
Two-handed push-style scraper for chiseling off coatings or floor-ing materials such as tile, lino-leum, paint and roofing materials. Foam on the handle and a rubber striking grip provide hand protec-tion. Die cast head with welded neck will not spin loose during use. reversible 4" blade for twice the life; can also be resharpened. 6" blade also available (#19452).
*Carded, 6.0lb, 2pk
19451 4" Hammer Scraper Blade
Hardened carbon steel blade with two sharpened edges for long life. Can be resharpened. replacement blade for HYDE® hammer scrapers #19430, #19440 and #19450.
*Carded, 3.0lb, 10pk
19452 6" Hammer Scraper Blade
Hardened carbon steel blade with two sharpened edges for long life. Can be resharpened. replacement blade for HYDE® hammer scrapers #19430, #19440 and #19450.
*Carded, 4.5lb, 10pk
19200 3" Heavy Duty Floor & Tile Scraper 55" handle
remove floor covering mate-rials from a standing position. Electrocoated, extra-heavy-duty high-carbon steel scraper is angled at 20° for push scraping. 3" stiff blade with 55" hardwood handle. Handle shield deflects debris and protects handle.
*Labeled, 7.7lb, 5pk
19205 6" Heavy Duty Floor & Tile Scraper 55" handle
remove floor covering mate-rials from a standing position. Electrocoated, extra-heavy-duty high-carbon steel scraper is angled at 20° for push-scraping. 6" stiff blade with 55" hardwood handle. Handle shield deflects debris and protects handle.
*Labeled, 8.7lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
Do it the hard way, or the HYDE® way.
Demo inprogress?Invest in a HYDE® Hammer scraper. Because you can’t get through a Herculean job with a scrappy tool.
5150
FLOORING TOOLS Flooring Knives
20200 2-1/2" Long-Point Flooring KnifeCut floor covering and drywall material. High-carbon cutlery steel blade; hardened, tempered and honed. Hardwood handle.
*Carded, 1.1lb, 5pk
20250 2-1/2" Short-Point Flooring KnifeCut floor covering and drywall material. High-carbon cutlery steel blade; hardened, tempered and honed. Hardwood handle.
*Carded, 1.1lb, 5pk
20350 2-1/2" Long-Point Flooring/Drywall Knife
Cut floor covering and drywall material. High-carbon cutlery steel blade; hardened, tempered and honed. Hardwood handle.
*Carded, 1.1lb, 5pk
20450 2-1/2" Long-Point Vinyl KnifeCut soft- and hard-core vinyl and floor covering. 2-1/2" long-point high-carbon cutlery steel blade; hardened, tempered and honed. Hardwood handle.
*Carded, 1.5lb, 5pk
20550 Black & Silver® Flooring/Roofing KnifeCutting tool for ceilings, drywall, floor covering, roofing. Heavy- duty .072" chrome vanadium steel blade. 5° offset angle for cutting leverage. Hollow ground to reduce binding. Soft-grip handle with finger guard. Guaranteed forever.
*Carded, 1.5lb, 5pk
20600 Black & Silver® Hose Cutter/ All-Purpose Trade KnifeCutting tool for professional trades: automotive, ceilings, drywall, floor covering, roofing and more. Extra heavy-duty .072"-thick 440 series stainless steel blade. 5° offset blade angle for cutting leverage. Serrated blade area. Soft-grip handle.
*Uncarded, 2.0lb, 5pk
20610 3-1/2" Flooring/ Drywall Knife
Cut flooring and drywall material. High-carbon cutlery steel blade is hardened, tempered and honed. Fiber finish hardwood handle.
*Carded, 2.0lb, 10pk
42095 Adjustable Blade Carpet Knife
Cut carpet, upholstery and heavy fabrics. adjustable blade retracts for safety. Offset head for leverage. High-impact plastic. reversible blade with 4 cutting edges. Change blade without tools. 6 blades included.
*Carded, 0.8lb, 5pk
Heavy Duty Floor & Tile Scrapers
12010 3" Heavy Duty Bent Chisel Scraper
Extra-heavy-duty high-carbon steel scraper for use with paint removers. 3" blade bent 20° for easy paint removal. Hardwood handle is milled, contoured and sanded smooth. High-carbon steel blade individually ground, polished, mirror finished and clear coated. Blade and handle permanently joined with brass rivets. Brass-plated hang hole.
*Labeled, 2.0lb, 5pk
12000 3" Heavy Duty Bent Chisel Scraper
Extra-heavy-duty high-carbon steel scraper with 5-1/2" poly- propylene handle, electrocoated for use with paint removers. 3" blade with 20° angle for easy paint removal. Measures 9" overall.
*Labeled, 1.8lb, 5pk
12060 3" Long Handle Bent Chisel Scraper
Extra-heavy-duty high-carbon steel scraper with 8" polypropyl-ene handle, electrocoated for use with paint removers. 3" blade with 20° angle for easy paint removal.
*Labeled, 2.0lb, 5pk
12050 3" Long Handle Chisel Scraper
Extra-heavy-duty high-carbon steel scraper with 8" polypropyl-ene handle, electrocoated for use with paint removers. 3" blade.
*Labeled, 2.0lb, 5pk
12070 3" Bent Chisel Extension Pole Scraper
Extra-heavy-duty high-carbon steel scraper electrocoated for use with paint removers. Use hand-held or with an acme threaded broom handle or ex-tension pole. One-piece polypro-pylene handle resists corrosion. Thumb bolster for increased leverage. 3" blade bent 20° for easier paint removal.
*Labeled, 2.1lb, 5pk
12072 3" Extra Heavy Duty Chisel Extension Pole Scraper
Extra-heavy-duty high-carbon steel scraper electrocoated for use with paint removers. Use hand-held or with an acme threaded broom handle or extension pole. One-piece polypropylene handle resists corrosion. Thumb bolster for increased leverage. 3" blade.
*Labeled, 2.1lb, 5pk
12055 3" Long Handle Brass Chisel Scraper
Brass non-spark blade for scrap-ing delicate surfaces or working in volatile environments. Poly- propylene handle with large hang hole for storage. Measures 11-1/4" overall; 3" blade.
*Labeled, 2.2lb, 5pk
19423 5" Offset Scraper with 48" handle
Two-handed scraper with offset blade for removing paint, wall- paper, floor adhesive, light-duty tile and linoleum. rust-resistant bright plated carbon steel blade is reversible and replaceable (#19453).
*Carded, 13lb, 5pk
19424 5" Offset Wall and Floor Scraper with 12" HandleHeavy-duty wall and floor scraper with offset design that makes it easier to get edge under material. 12" length for working in tight spaces. Cushioned grip with protective hand stop. Die cast metal head holds blade securely. reversible 5" blade.
*Carded, 3.7lb, 4pk
19425 5" Offset Hammer Scraper with 12" HandleHeavy-duty wall and floor scraper with offset design that makes it easier to get edge under material. 12" length for working in tight spaces. Hammer butt end for cracking tiles. Foam on the handle and a rubber striking grip provide hand protection. Die cast head with welded neck will not spin loose during use. reversible 5" blade; can also be resharpened.
*Carded, 3.0lb, 4pk
19453 5" Hammer Scraper BladeHardened carbon steel replace-ment blade for use with HYDE® scraper #19425.
*Carded, 2.5lb, 10pk
19430 4"/6" Hammer Scraper with 18" Handle
Heavy-duty scraper for hand- chiseling wall tile or hammer- chiseling flooring materials. Foam on the handle and a rubber grip provide hand protection. Die cast head with welded neck will not spin loose during use. reversible 4" blade for twice the life; can also be resharpened. 6" blade also available (#19452).
*Carded, 3.6lb, 2pk
19440 4"/6" Hammer Scraper with 48" Handle
Two-handed push-style scraper for chiseling off coatings or floor-ing materials such as tile, lino-leum, paint and roofing materials. Foam on the handle and a rubber striking grip provide hand protec-tion. Die cast head with welded neck will not spin loose during use. reversible 4" blade for twice the life; can also be resharpened. 6" blade also available (#19452).
*Carded, 2pk
19450 4"/6" Hammer Scraper with 54" Handle
Two-handed push-style scraper for chiseling off coatings or floor-ing materials such as tile, lino-leum, paint and roofing materials. Foam on the handle and a rubber striking grip provide hand protec-tion. Die cast head with welded neck will not spin loose during use. reversible 4" blade for twice the life; can also be resharpened. 6" blade also available (#19452).
*Carded, 6.0lb, 2pk
19451 4" Hammer Scraper Blade
Hardened carbon steel blade with two sharpened edges for long life. Can be resharpened. replacement blade for HYDE® hammer scrapers #19430, #19440 and #19450.
*Carded, 3.0lb, 10pk
19452 6" Hammer Scraper Blade
Hardened carbon steel blade with two sharpened edges for long life. Can be resharpened. replacement blade for HYDE® hammer scrapers #19430, #19440 and #19450.
*Carded, 4.5lb, 10pk
19200 3" Heavy Duty Floor & Tile Scraper 55" handle
remove floor covering mate-rials from a standing position. Electrocoated, extra-heavy-duty high-carbon steel scraper is angled at 20° for push scraping. 3" stiff blade with 55" hardwood handle. Handle shield deflects debris and protects handle.
*Labeled, 7.7lb, 5pk
19205 6" Heavy Duty Floor & Tile Scraper 55" handle
remove floor covering mate-rials from a standing position. Electrocoated, extra-heavy-duty high-carbon steel scraper is angled at 20° for push-scraping. 6" stiff blade with 55" hardwood handle. Handle shield deflects debris and protects handle.
*Labeled, 8.7lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
Do it the hard way, or the HYDE® way.
Demo inprogress?Invest in a HYDE® Hammer scraper. Because you can’t get through a Herculean job with a scrappy tool.
5352
WALLCOVERING TOOLSTools for Wallpaper Hanging
31550 Quick-Change Razor Knife with 1 Blade
Cut, slice and trim wallcovering, paper, foil and other materials, with smooth slicing on or off the wall. Metal frame holds single- edge razor blade. Hardwood handle.
*Carded, 1.0lb, 5pk
34015 11" Stainless Steel Professional Shears
Oversize stainless steel shears for scoring and cutting wallcovering, fabric, foil, plastic, vinyl and more. Stainless blades resist corrosion and hold a sharp edge. adjustable tension. Precision tip for scoring materials to be cut. Soft-grip handles fit left or right hand.
*Carded, 2.0lb, 5pk
35600 28" Prepasted Wallcovering Tray
Wet all types of prepasted wallcovering. reinforcing ribs and heavy-duty polystyrene construction for stability. Molded handles help lift and carry. also use for seedling and flower planter, indoors or out. Measures 7-1/2"x33" at top, 4-1/2"x28" at bottom, 4" deep.
*Labeled, 7.0lb, 10pk
35805 6" Wallcovering Paste Brush
6" brush for spreading wall- covering paste and adhesive. Hardwood handle with 3" polypropylene bristles.
*Labeled, 3.5lb, 10pk
Smoothing and Trim Tools
45810 24-1/2" Super Guide™ Paint Shield & Smoothing Tool
Use as a paint shield, smoothing tool for wallcovering material or drywall compound and as a straightedge for trimming. Stain-less steel blade extends beyond handle to reach into corners. High-impact styrene handle. Large holes to hang tool.
*Labeled, 2.7lb, 5pk
45805 11-1/2" Mini Guide™ Paint Shield & Smoothing Tool
Use as a paint shield, smoothing tool for wallcovering material or drywall compound and as a straightedge for trimming. Stain-less steel blade extends beyond handle to reach into corners. High-impact styrene handle. Large holes to hang tool.
*Labeled, 1.0lb, 5pk
35789 12" Vinyl Smoothing Brush
Smooth wallcovering during application. One-piece hard-wood handle with single row of polypropylene bristles. Measures 12" overall.
*Labeled, 3.0lb, 10pk
45808 10" Smoothing Tool
Sturdy polypropylene tool for smoothing wallcoverings and other materials. Tapered edge for flexibility. Large finger depression provides sure grip.
*Labeled, 1.5lb, 10pk
45807 8" Smoothing Tool
Smooth wallcovering and other materials. also use as trim guide and paint shield. Sturdy white polypropylene construction with tapered working edge for flexibility. rounded edges won’t mark or damage work.
*Labeled, 1.5lb, 10pk
Wallpaper Rollers
30160 1-1/4" Oval Hardwood Seam Roller
Sturdy oval hardwood roller for smoothing and securing wall- covering seams. Spring steel frame on hardwood handle.
*Carded, 1.2lb, 5pk
30100 1-1/4" Flat Hardwood Roller
Sturdy flat hardwood roller for smoothing and securing wall- covering after hanging. Spring steel frame on hardwood handle. (Note: Use oval roller #30160 for rolling seams.)
*Carded, 1.3lb, 5pk
30120 1-1/4" Red Star™ Flat Hardwood Roller
Lightweight flat hardwood roller for smoothing and securing wall-covering. Side-mount with offset for smoothing corners. Polypro-pylene handle with hang hole. (Note: Use oval roller #30160 for rolling seams.)
*Carded, 0.8lb, 5pk
30122 1-1/4" Red Star™ Flat Plastic Roller
Lightweight flat plastic roller for smoothing and securing wall- covering. Side-mount with offset for smoothing corners. Poly- propylene handle with hang hole. (Note: Use oval roller #30160 for rolling seams.)
*Carded, 0.5lb, 5pk
30250 1-1/4" Flat Hardwood 2-in-1 Roller
Sturdy flat hardwood roller for smoothing and securing wall-covering. Flat hardwood roller converts to offset style corner roller. Freewheeling with spring steel frame on hardwood handle. (Note: Use oval roller #30160 for rolling seams.)
*Carded, 1.1lb, 5pk
Tools for Wallpaper Removal
33210 Wallpaper Scoring Tool
Perforate wallcoverings to speed removal. When used in a circular motion, 96 stainless steel teeth make shallow cuts to allow liquid remover or steam to penetrate and loosen adhesive without damage to wall.
*Carded, 1.5lb, 5pk
Wallpaper Scrapers
06579 4" Stiff Pro Stainless™ Scraper
Premium quality Pro Stainless™ joint knife features 4" stiff rust- resistant blade with bevel edge. Perfect for wallpaper removal and general scraping. Double hollow-ground for the perfect flex point plus durable Hammer Head® end for resetting nails and screws. Superior grip has over-mold cushioning for prolonged taping jobs.
*Labeled, 1.5LB 5pk
02600 4" Extra Heavy Duty Stiff Black & Silver® Chisel Scraper
Extra-heavy-duty Black & Silver® scraper. 4" high-carbon steel blade with chisel edge and durable nylon handle. Full-tang blade. Guaranteed forever.
*Labeled, 1.8lb, 5pk
33250 4" Glass and Wall Scraper with Blade Storage
replace 4” blade fast and without tools. Overmold handle provides a secure, comfortable grip. Stores up to 5 blades in the handle. 1 reversible blade included; one side scrapes, the other shaves.
*Carded, 2.4lb, 10pk
Wallpaper Shavers
33120 4" Multi-use Wallpaper Shaver/Scraper
For safer and efficient removal of wallcoverings. also scrapes paint and stickers from glass and mirrors. Push-button blade change requires no tools. Double lock for positive blade holding. Use HYDE® blade #33170 to maintain proper positioning.
*Carded, 2.0lb, 5pk
33110 4" Multi-use Wallpaper Shaver/Scraper
Shave off wallpaper or scrape paint and stickers off glass and mirrors. angled head takes 3-1/4" replaceable blade. Tubular metal handle with cushioned foam grip. Measures 12" overall.
*Carded, 2.8lb, 5pk
33100 3-1/4" Multi-use Wallpaper Shaver/ Scraper"
Shave off wallpaper or scrape paint and stickers off glass and mirrors. angled head takes 3-1/4" replaceable blade. Tubular metal handle with cushioned foam grip. Measures 11" overall.
*Carded, 2.6lb, 5pk
33095
4" Offset Wallpaper Scraper with 44" Handle
Two-handed scraper with 4" offset blade for removing paint and wallpaper. rust-resistant bright plated carbon steel blade is reversible and replaceable (#33255, #33170).
*Carded, 7.0lb, 5pk
Wallpaper Shaver Replacement Blades
33170 4" Wallpaper Shaver Blades 5 Pack
replacement blades for HYDE® wallpaper shavers #33120, #33110, and other 4" shavers.
*Carded, 0.7lb, 10pk
33255 Universal Shaver Blades 5 Pack
Versatile 4" replacement shaver blades also snap off to fit 3-1/4" shavers. Fits HYDE® #33120, #33110, #33250 and other shavers in those sizes.
*Carded, 0.7lb, 10pk
33150 3-1/4" Wallpaper Shaver Blades 5 Pack
replacement blades for shaver #33100.
*Carded, 0.5lb, 10pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
5352
WALLCOVERING TOOLSTools for Wallpaper Hanging
31550 Quick-Change Razor Knife with 1 Blade
Cut, slice and trim wallcovering, paper, foil and other materials, with smooth slicing on or off the wall. Metal frame holds single- edge razor blade. Hardwood handle.
*Carded, 1.0lb, 5pk
34015 11" Stainless Steel Professional Shears
Oversize stainless steel shears for scoring and cutting wallcovering, fabric, foil, plastic, vinyl and more. Stainless blades resist corrosion and hold a sharp edge. adjustable tension. Precision tip for scoring materials to be cut. Soft-grip handles fit left or right hand.
*Carded, 2.0lb, 5pk
35600 28" Prepasted Wallcovering Tray
Wet all types of prepasted wallcovering. reinforcing ribs and heavy-duty polystyrene construction for stability. Molded handles help lift and carry. also use for seedling and flower planter, indoors or out. Measures 7-1/2"x33" at top, 4-1/2"x28" at bottom, 4" deep.
*Labeled, 7.0lb, 10pk
35805 6" Wallcovering Paste Brush
6" brush for spreading wall- covering paste and adhesive. Hardwood handle with 3" polypropylene bristles.
*Labeled, 3.5lb, 10pk
Smoothing and Trim Tools
45810 24-1/2" Super Guide™ Paint Shield & Smoothing Tool
Use as a paint shield, smoothing tool for wallcovering material or drywall compound and as a straightedge for trimming. Stain-less steel blade extends beyond handle to reach into corners. High-impact styrene handle. Large holes to hang tool.
*Labeled, 2.7lb, 5pk
45805 11-1/2" Mini Guide™ Paint Shield & Smoothing Tool
Use as a paint shield, smoothing tool for wallcovering material or drywall compound and as a straightedge for trimming. Stain-less steel blade extends beyond handle to reach into corners. High-impact styrene handle. Large holes to hang tool.
*Labeled, 1.0lb, 5pk
35789 12" Vinyl Smoothing Brush
Smooth wallcovering during application. One-piece hard-wood handle with single row of polypropylene bristles. Measures 12" overall.
*Labeled, 3.0lb, 10pk
45808 10" Smoothing Tool
Sturdy polypropylene tool for smoothing wallcoverings and other materials. Tapered edge for flexibility. Large finger depression provides sure grip.
*Labeled, 1.5lb, 10pk
45807 8" Smoothing Tool
Smooth wallcovering and other materials. also use as trim guide and paint shield. Sturdy white polypropylene construction with tapered working edge for flexibility. rounded edges won’t mark or damage work.
*Labeled, 1.5lb, 10pk
Wallpaper Rollers
30160 1-1/4" Oval Hardwood Seam Roller
Sturdy oval hardwood roller for smoothing and securing wall- covering seams. Spring steel frame on hardwood handle.
*Carded, 1.2lb, 5pk
30100 1-1/4" Flat Hardwood Roller
Sturdy flat hardwood roller for smoothing and securing wall- covering after hanging. Spring steel frame on hardwood handle. (Note: Use oval roller #30160 for rolling seams.)
*Carded, 1.3lb, 5pk
30120 1-1/4" Red Star™ Flat Hardwood Roller
Lightweight flat hardwood roller for smoothing and securing wall-covering. Side-mount with offset for smoothing corners. Polypro-pylene handle with hang hole. (Note: Use oval roller #30160 for rolling seams.)
*Carded, 0.8lb, 5pk
30122 1-1/4" Red Star™ Flat Plastic Roller
Lightweight flat plastic roller for smoothing and securing wall- covering. Side-mount with offset for smoothing corners. Poly- propylene handle with hang hole. (Note: Use oval roller #30160 for rolling seams.)
*Carded, 0.5lb, 5pk
30250 1-1/4" Flat Hardwood 2-in-1 Roller
Sturdy flat hardwood roller for smoothing and securing wall-covering. Flat hardwood roller converts to offset style corner roller. Freewheeling with spring steel frame on hardwood handle. (Note: Use oval roller #30160 for rolling seams.)
*Carded, 1.1lb, 5pk
Tools for Wallpaper Removal
33210 Wallpaper Scoring Tool
Perforate wallcoverings to speed removal. When used in a circular motion, 96 stainless steel teeth make shallow cuts to allow liquid remover or steam to penetrate and loosen adhesive without damage to wall.
*Carded, 1.5lb, 5pk
Wallpaper Scrapers
06579 4" Stiff Pro Stainless™ Scraper
Premium quality Pro Stainless™ joint knife features 4" stiff rust- resistant blade with bevel edge. Perfect for wallpaper removal and general scraping. Double hollow-ground for the perfect flex point plus durable Hammer Head® end for resetting nails and screws. Superior grip has over-mold cushioning for prolonged taping jobs.
*Labeled, 1.5LB 5pk
02600 4" Extra Heavy Duty Stiff Black & Silver® Chisel Scraper
Extra-heavy-duty Black & Silver® scraper. 4" high-carbon steel blade with chisel edge and durable nylon handle. Full-tang blade. Guaranteed forever.
*Labeled, 1.8lb, 5pk
33250 4" Glass and Wall Scraper with Blade Storage
replace 4” blade fast and without tools. Overmold handle provides a secure, comfortable grip. Stores up to 5 blades in the handle. 1 reversible blade included; one side scrapes, the other shaves.
*Carded, 2.4lb, 10pk
Wallpaper Shavers
33120 4" Multi-use Wallpaper Shaver/Scraper
For safer and efficient removal of wallcoverings. also scrapes paint and stickers from glass and mirrors. Push-button blade change requires no tools. Double lock for positive blade holding. Use HYDE® blade #33170 to maintain proper positioning.
*Carded, 2.0lb, 5pk
33110 4" Multi-use Wallpaper Shaver/Scraper
Shave off wallpaper or scrape paint and stickers off glass and mirrors. angled head takes 3-1/4" replaceable blade. Tubular metal handle with cushioned foam grip. Measures 12" overall.
*Carded, 2.8lb, 5pk
33100 3-1/4" Multi-use Wallpaper Shaver/ Scraper"
Shave off wallpaper or scrape paint and stickers off glass and mirrors. angled head takes 3-1/4" replaceable blade. Tubular metal handle with cushioned foam grip. Measures 11" overall.
*Carded, 2.6lb, 5pk
33095
4" Offset Wallpaper Scraper with 44" Handle
Two-handed scraper with 4" offset blade for removing paint and wallpaper. rust-resistant bright plated carbon steel blade is reversible and replaceable (#33255, #33170).
*Carded, 7.0lb, 5pk
Wallpaper Shaver Replacement Blades
33170 4" Wallpaper Shaver Blades 5 Pack
replacement blades for HYDE® wallpaper shavers #33120, #33110, and other 4" shavers.
*Carded, 0.7lb, 10pk
33255 Universal Shaver Blades 5 Pack
Versatile 4" replacement shaver blades also snap off to fit 3-1/4" shavers. Fits HYDE® #33120, #33110, #33250 and other shavers in those sizes.
*Carded, 0.7lb, 10pk
33150 3-1/4" Wallpaper Shaver Blades 5 Pack
replacement blades for shaver #33100.
*Carded, 0.5lb, 10pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
5554
KNIVES & BLADESTop Slide Utility Knives
42081 MAXXGRIP® Top Slide Utility Knife
Top-of-the-line utility knife has 4 blade positions and top-slide push-button blade adjustment. Overlap nose for blade support. Change blade without tools. 1 heavy-duty blade included.
*Carded, 3.0lb, 5pk
42083 MAXXGRIP® Angle Head Top Slide Utility Knife
Professional grade top-slide knife with 3 lockable blade positions. Offset head for leverage and overlap nose for blade support. Soft-grip for extended use. Change blade without tools. 1 heavy-duty blade included.
*Carded, 2.8lb, 5pk
42020 Front-Loading Utility Knife
Many extra features on this heavy-duty utility knife. 3 blade positions with top-slide control. Push-button blade change re-quires no tools. Built-in notch cuts string without exposing blade. Plus handle has blade storage. 3 heavy-duty blades included.
*Carded, 1.5lb, 5pk
42070 Top Slide Utility Knife
Top-slide push-button blade adjustment. 3 cutting positions. Gray textured zinc alloy body with overlap nose for blade support. 1 heavy-duty blade included.
*Carded, 2.3lb, 5pk
42025 Mini Top Slide Utility Knife
Lightweight, pocket-size knife for light-duty cutting has top-slide blade adjustment with 3 blade positions.
*Carded, 0.8lb, 10pk
42026 Mini Top Slide Utility Knife Blades 5 Pack
replacement blades for Mini Top Slide Utility Knife (#42025).
*Carded, 0.2lb, 10pk
Powder-Coated Top Slide Utility KnivesBright powder-coated metal knife is easy to spot at worksites. Top-slide push-button blade adjustment. 9 cutting positions.
42074 Red Powder-Coated Top Slide Utility Knife
1 heavy-duty blade included.
*Carded, 2.0lb, 5pk
42075 Silver Powder-Coated Top Slide Utility Knife
1 heavy-duty blade included.
*Carded, 2.0lb, 5pk
Fixed Blade Utility Knives
42080 Angle Head Fixed-Blade Utility Knife
Offset head for greater leverage. Black die cast aluminum alloy with overlap nose for blade support. Change blade without tools. 1 heavy-duty blade included.
*Carded, 2.4lb, 5pk
42090 Heavy Duty Fixed Blade Utility Knife
Heavy-duty fixed blade knife with knurled metal handle for positive grip. Overlap nose for blade support. 1 heavy-duty blade included.
*Carded, 2.0lb, 5pk
Utility Knife Replacement Blades
42115 Universal Utility Knife Blades 5 Pack
5 universal fit .025" blades fit most utility knives. round center hole for added compatibility.
*Carded, 0.5lb, 10pk
42100 Heavy Duty Utility Knife Blades 5 Pack
5 heavy-duty .025" blades fit most utility knives.
*Carded, 0.6lb, 10pk
42104 Heavy Duty Utility Knife Blades 10 Pack
10 heavy-duty .025" blades fit most utility knives.
*Carded, 1.0lb, 10pk
42103 Heavy Duty Utility 50-Blade Dispenser
Dispenser holds 50 heavy-duty .025" utility blades. (style: see #42100). Dispenses 1 blade at a time. Designed to be wall hung or fit in a toolbox.
*Carded, 6.0lb, 10pk
42150 Heavy Duty Utility Knife Blades 100 Pack
100 heavy-duty .025" blades fit most utility knives. (style: see #42100).
*Boxed, 0.9lb, 1pk
42101 Heavy Duty Utility 100-Blade Dispenser
Dispenser holds 100 heavy-duty .025" utility blades. (style: see #42100). Dispenses 1 blade at a time. Designed to be wall hung or fit in a toolbox.
*Boxed, 1.0lb, 1pk
42117 Heavy Duty Round-Tip Utility Knife Blades 5 Pack
5 heavy-duty .025" blades with rounded tips protect against accidental cuts. Fit most utility knives.
*Carded, 0.5lb, 10pk
42118 Heavy Duty Round-Tip Utility Knife Blades 100 Pack
100 heavy-duty .025" blades with rounded tips (style: see #42117) protect against acciden-tal cuts. Fit most utility knives.
*Boxed, 1.0lb, 1pk
42102 Heavy Duty Round-Tip Utility 100-Blade Dispenser
Dispenser holds 100 heavy-duty .025 round-tip utility blades. (style: see #42117). Dispenses 1 blade at a time. Designed to be wall hung or fit in toolbox.
*Boxed, 1.0lb, 1pk
42200 Heavy Duty Utility Hook Blades 5 Pack
5 heavy-duty .025"-thick blades with sharpened hooks for ripping linoleum. Designed to fit HYDE® knives and most other top-slide and fixed-blade utility knives.
*Carded, 0.5lb, 10pk
42250 Heavy Duty Utility Hook Blades 100 Pack
100 heavy-duty .025"-thick blades with sharpened hooks for ripping linoleum. Designed to fit HYDE® knives and most other top-slide and fixed-blade utility knives.
*Boxed, 0.9lb, 1pk
SwitchBlade® Safety Utility Knives
Safely cut boxes and cartons. Minimally exposed knife blade automatically retracts when button is released. For left- or right-handed operation. Use round-tip or standard utility blades.
42067 SwitchBlade® Metal Safety Utility Knife (1/4" exposure)
Top-of-the-line die cast metal. 1 heavy-duty round-tip blade included. Blade exposure: 1/4".
*Carded, 3.0lb, 10pk
42062 SwitchBlade® Metal Safety Utility Knife (11/16" exposure)
Top-of-the-line die cast metal. 1 heavy-duty round-tip blade included. Blade exposure: 11/16".
*Uncarded, 3.0lb, 10pk
42065 SwitchBlade® Metal Safety Utility Knife (1/4"-7/16" exposure)
Top-of-the-line die cast metal with short and long exposure options. 1 heavy-duty round-tip blade included. Blade exposure: 1/4" or 7/16".
*Carded, 3.2lb, 10pk
42056 SwitchBlade® Ultra-Light Utility Knife (1/4"-7/16" exposure)
Polypropylene construction. Change blades without tools. Blade exposure: 1/4" or 7/16".
*Carded, 1.0lb, 10pk
42060 SwitchBlade® Ultra-Light Utility Knife (1/2" exposure)
Polypropylene construction. Change blades without tools. Blade exposure: 1/2".
*Carded, 1.0lb, 10pk
Utility Knife Pouches
42500 Vinyl Utility Knife Pouch
accepts most straight design utility knives. rugged leather grain vinyl. Heavy-duty stitched construction. reinforced belt loop.
*Carded, 0.8lb, 10pk
42520 Heavy Duty Leather Utility Knife Pouch
Holsters utility knife with blade exposed. Heavy-duty top grain leather with rivet-reinforced con-struction. V-tapered, closed end pocket. Composition pocket liner for added safety and durability. 2-1/2"-wide belt slots.
*Carded, 1.6lb, 5pk
42525 Heavy-Duty Leather Angle Head Utility Knife Pouch
Holsters angle HYDE® head utility knife #42080 with blade exposed. Heavy-duty top grain leather with rivet-reinforced construction. Closed-end pocket holds knife with friction fit. Composition pocket liner for added safety and durability. 2-1/2"-wide belt slots.
*Carded, 1.6lb, 5pk0"
Carton and Plastic Cutters
42005 Carton Cutter
Metal frame holds a single-edge razor blade for slitting open boxes and cartons or cutting wallcovering and other materials. Blade retracts for safety. Change blade without tools. 1 blade included.
*Carded, 0.5lb, 10pk
45730 Plastic Cutter
Score sheet plastic, acrylics and laminated fiberglass as well as thin copper and aluminum. Scoring edge is double-bevel ground. Plastic handle grip.
*Carded, 1.1lb, 10pk
Snap-Off Utility Knives
Cut cardboard, foil, paper, wall- covering and more. Break off blade tip for a sharp point.
18mm Snap-Off Utility Knives
42048 Auto-Load 18mm Snap-Off Blade Utility Knife
Magazine-fed utility knife with 5 blades allows 40 sharp points to load automatically. Change blade quickly as needed. retractable blade with 2-piece positive lock. High-impact polystyrene.
*Carded, 3.0lb, 10pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
5554
KNIVES & BLADESTop Slide Utility Knives
42081 MAXXGRIP® Top Slide Utility Knife
Top-of-the-line utility knife has 4 blade positions and top-slide push-button blade adjustment. Overlap nose for blade support. Change blade without tools. 1 heavy-duty blade included.
*Carded, 3.0lb, 5pk
42083 MAXXGRIP® Angle Head Top Slide Utility Knife
Professional grade top-slide knife with 3 lockable blade positions. Offset head for leverage and overlap nose for blade support. Soft-grip for extended use. Change blade without tools. 1 heavy-duty blade included.
*Carded, 2.8lb, 5pk
42020 Front-Loading Utility Knife
Many extra features on this heavy-duty utility knife. 3 blade positions with top-slide control. Push-button blade change re-quires no tools. Built-in notch cuts string without exposing blade. Plus handle has blade storage. 3 heavy-duty blades included.
*Carded, 1.5lb, 5pk
42070 Top Slide Utility Knife
Top-slide push-button blade adjustment. 3 cutting positions. Gray textured zinc alloy body with overlap nose for blade support. 1 heavy-duty blade included.
*Carded, 2.3lb, 5pk
42025 Mini Top Slide Utility Knife
Lightweight, pocket-size knife for light-duty cutting has top-slide blade adjustment with 3 blade positions.
*Carded, 0.8lb, 10pk
42026 Mini Top Slide Utility Knife Blades 5 Pack
replacement blades for Mini Top Slide Utility Knife (#42025).
*Carded, 0.2lb, 10pk
Powder-Coated Top Slide Utility KnivesBright powder-coated metal knife is easy to spot at worksites. Top-slide push-button blade adjustment. 9 cutting positions.
42074 Red Powder-Coated Top Slide Utility Knife
1 heavy-duty blade included.
*Carded, 2.0lb, 5pk
42075 Silver Powder-Coated Top Slide Utility Knife
1 heavy-duty blade included.
*Carded, 2.0lb, 5pk
Fixed Blade Utility Knives
42080 Angle Head Fixed-Blade Utility Knife
Offset head for greater leverage. Black die cast aluminum alloy with overlap nose for blade support. Change blade without tools. 1 heavy-duty blade included.
*Carded, 2.4lb, 5pk
42090 Heavy Duty Fixed Blade Utility Knife
Heavy-duty fixed blade knife with knurled metal handle for positive grip. Overlap nose for blade support. 1 heavy-duty blade included.
*Carded, 2.0lb, 5pk
Utility Knife Replacement Blades
42115 Universal Utility Knife Blades 5 Pack
5 universal fit .025" blades fit most utility knives. round center hole for added compatibility.
*Carded, 0.5lb, 10pk
42100 Heavy Duty Utility Knife Blades 5 Pack
5 heavy-duty .025" blades fit most utility knives.
*Carded, 0.6lb, 10pk
42104 Heavy Duty Utility Knife Blades 10 Pack
10 heavy-duty .025" blades fit most utility knives.
*Carded, 1.0lb, 10pk
42103 Heavy Duty Utility 50-Blade Dispenser
Dispenser holds 50 heavy-duty .025" utility blades. (style: see #42100). Dispenses 1 blade at a time. Designed to be wall hung or fit in a toolbox.
*Carded, 6.0lb, 10pk
42150 Heavy Duty Utility Knife Blades 100 Pack
100 heavy-duty .025" blades fit most utility knives. (style: see #42100).
*Boxed, 0.9lb, 1pk
42101 Heavy Duty Utility 100-Blade Dispenser
Dispenser holds 100 heavy-duty .025" utility blades. (style: see #42100). Dispenses 1 blade at a time. Designed to be wall hung or fit in a toolbox.
*Boxed, 1.0lb, 1pk
42117 Heavy Duty Round-Tip Utility Knife Blades 5 Pack
5 heavy-duty .025" blades with rounded tips protect against accidental cuts. Fit most utility knives.
*Carded, 0.5lb, 10pk
42118 Heavy Duty Round-Tip Utility Knife Blades 100 Pack
100 heavy-duty .025" blades with rounded tips (style: see #42117) protect against acciden-tal cuts. Fit most utility knives.
*Boxed, 1.0lb, 1pk
42102 Heavy Duty Round-Tip Utility 100-Blade Dispenser
Dispenser holds 100 heavy-duty .025 round-tip utility blades. (style: see #42117). Dispenses 1 blade at a time. Designed to be wall hung or fit in toolbox.
*Boxed, 1.0lb, 1pk
42200 Heavy Duty Utility Hook Blades 5 Pack
5 heavy-duty .025"-thick blades with sharpened hooks for ripping linoleum. Designed to fit HYDE® knives and most other top-slide and fixed-blade utility knives.
*Carded, 0.5lb, 10pk
42250 Heavy Duty Utility Hook Blades 100 Pack
100 heavy-duty .025"-thick blades with sharpened hooks for ripping linoleum. Designed to fit HYDE® knives and most other top-slide and fixed-blade utility knives.
*Boxed, 0.9lb, 1pk
SwitchBlade® Safety Utility Knives
Safely cut boxes and cartons. Minimally exposed knife blade automatically retracts when button is released. For left- or right-handed operation. Use round-tip or standard utility blades.
42067 SwitchBlade® Metal Safety Utility Knife (1/4" exposure)
Top-of-the-line die cast metal. 1 heavy-duty round-tip blade included. Blade exposure: 1/4".
*Carded, 3.0lb, 10pk
42062 SwitchBlade® Metal Safety Utility Knife (11/16" exposure)
Top-of-the-line die cast metal. 1 heavy-duty round-tip blade included. Blade exposure: 11/16".
*Uncarded, 3.0lb, 10pk
42065 SwitchBlade® Metal Safety Utility Knife (1/4"-7/16" exposure)
Top-of-the-line die cast metal with short and long exposure options. 1 heavy-duty round-tip blade included. Blade exposure: 1/4" or 7/16".
*Carded, 3.2lb, 10pk
42056 SwitchBlade® Ultra-Light Utility Knife (1/4"-7/16" exposure)
Polypropylene construction. Change blades without tools. Blade exposure: 1/4" or 7/16".
*Carded, 1.0lb, 10pk
42060 SwitchBlade® Ultra-Light Utility Knife (1/2" exposure)
Polypropylene construction. Change blades without tools. Blade exposure: 1/2".
*Carded, 1.0lb, 10pk
Utility Knife Pouches
42500 Vinyl Utility Knife Pouch
accepts most straight design utility knives. rugged leather grain vinyl. Heavy-duty stitched construction. reinforced belt loop.
*Carded, 0.8lb, 10pk
42520 Heavy Duty Leather Utility Knife Pouch
Holsters utility knife with blade exposed. Heavy-duty top grain leather with rivet-reinforced con-struction. V-tapered, closed end pocket. Composition pocket liner for added safety and durability. 2-1/2"-wide belt slots.
*Carded, 1.6lb, 5pk
42525 Heavy-Duty Leather Angle Head Utility Knife Pouch
Holsters angle HYDE® head utility knife #42080 with blade exposed. Heavy-duty top grain leather with rivet-reinforced construction. Closed-end pocket holds knife with friction fit. Composition pocket liner for added safety and durability. 2-1/2"-wide belt slots.
*Carded, 1.6lb, 5pk0"
Carton and Plastic Cutters
42005 Carton Cutter
Metal frame holds a single-edge razor blade for slitting open boxes and cartons or cutting wallcovering and other materials. Blade retracts for safety. Change blade without tools. 1 blade included.
*Carded, 0.5lb, 10pk
45730 Plastic Cutter
Score sheet plastic, acrylics and laminated fiberglass as well as thin copper and aluminum. Scoring edge is double-bevel ground. Plastic handle grip.
*Carded, 1.1lb, 10pk
Snap-Off Utility Knives
Cut cardboard, foil, paper, wall- covering and more. Break off blade tip for a sharp point.
18mm Snap-Off Utility Knives
42048 Auto-Load 18mm Snap-Off Blade Utility Knife
Magazine-fed utility knife with 5 blades allows 40 sharp points to load automatically. Change blade quickly as needed. retractable blade with 2-piece positive lock. High-impact polystyrene.
*Carded, 3.0lb, 10pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
5756
KNIVES & BLADES
42030 Auto-Lock 18mm Snap-Off Blade Utility Knife
3 blades included, with 8 sharp points per blade; plus built-in blade breaker. 2-blade storage in handle. retractable blade with one-piece positive lock. High- impact polystyrene with stainless steel blade track.
*Carded, 2.0lb, 10pk
42047 18mm Snap-Off Blade Utility Knife
1 blade included, with 8 sharp points per blade; plus built-in blade breaker. retractable blade with 2-piece positive lock. High-impact polystyrene.
*Carded, 1.2lb, 10pk
18mm Snap-Off Replacement BladesFor use with HYDE® #42048, #42030, #42047 and most other 18mm knives. 8 points per blade.
42330 18mm Snap-Off Blades 5 Pack*Carded, 0.8lb, 10pk
42355 18mm Snap-Off Blades 10-Blade Dispenser
reusable dispenser with hang hole holds 10 blades.
*Carded, 1.9lb, 10pk
42357 18mm Snap-Off Blades 10-Blade Dispenser with Used Blade Storage
reusable dispenser with hang hole holds 10 blades. Used blade storage for safe disposal.
*Carded, 2.7lb, 10pk
42359 18mm Snap-Off Blades 50-Blade Dispenser
reusable dispenser with hang hole holds 50 blades.
*Carded, 8.5lb, 10pk
42049 18mm Snap-Off Blades 5-Blade AutoLoad Replacement Magazine
replacement magazine with 5 18mm blades for use with HYDE® #42048 auto-load utility knife. 8 sharp points per blade.
*Carded, 1.3lb, 10pk
9mm Snap-Off Utility Knives
42027 MAXXGRIP® 9mm Snap-Off Blade Utility Knife
3 blades included, with 13 sharp points per blade; plus built-in blade breaker. 2-blade storage in handle. Cushioned body for sure grip. Stainless steel blade track lets you reverse the blade for left- or right-hand use. retractable blade with 1-piece positive lock.
*Carded, 1.3lb, 10pk
42045 Auto-Lock 9mm Snap-Off Blade Utility Knife
3 blades included, with 13 sharp points per blade; plus built-in blade breaker. 2-blade storage in handle. retractable blade with 1-piece positive lock. High-impact polystyrene with stainless steel blade track.
*Carded, 0.9lb, 10pk
42032 Metal 9mm Snap-Off Blade Utility Knife
3 blades included with 13 sharp points per blade; plus built-in blade breaker. retractable blade with push-button control. Silver metal body with pocket clip.
*Carded, 0.8lb, 10pk
42035 9mm Snap-Off Blade Utility Knife
1 blade included, with 13 sharp points per blade; plus built-in blade breaker. retractable blade with 2-piece positive lock. High-impact polystyrene.
*Carded, 0.5lb, 10pk
42036 Economy 9mm Snap-Off Blade Utility Knife
1 blade included, with 13 sharp points per blade; plus built-in blade breaker. retractable blade with 2-piece positive lock. High-impact polystyrene.
*Carded, 0.5lb, 10pk
9mm Snap-Off Replacement BladesFor use with HYDE® #42027, #42032, #42035, #42036 #42045 and most other 9mm knives. 13 points per blade.
42345 9mm Snap-Off Blades 5 Pack*Carded, 1.1lb, 10pk
42356 9mm Snap-Off Blades 10-Blade Dispenser with Used Blade Storage
reusable dispenser with hang hole. Used blade storage for safe disposal.
*Carded, 1.1lb, 10pk
42358 9mm Snap-Off Blades 100-Blade Dispenser
reusable dispenser with hang hole.
*Carded, 6.0lb, 10pk
Roofing & Flooring Trade Knives
22320 Black & Silver® Roofing Knife
Stiff, high-carbon steel blade to score and cut roofing and drywall or pry apart asphalt shingles. Guaranteed forever.
*Carded, 0.8lb, 5pk
20550 Black & Silver® Flooring/Roofing Knife
Cutting tool for ceilings, drywall, floor covering, roofing. Heavy- duty .072" chrome vanadium steel blade. 5° offset angle for cutting leverage. Hollow ground to reduce binding. Soft-grip handle with finger guard. Guaranteed forever.
*Carded, 1.5lb, 5pk
22310 2" Short-Point Roofing Knife
Cut roofing and drywall materials. High-carbon cutlery steel blade hardened, tempered and honed. Hardwood handle.
*Carded, 0.9lb, 10pk
20600 Black & Silver® Hose Cutter/All-Purpose Trade Knife
Cutting tool for professional trades: automotive, ceilings, drywall, floor covering, roofing and more. Extra heavy-duty .072"-thick 440 series stainless steel blade. 5° offset blade angle for cutting leverage. Serrated blade area. Soft-grip handle. Guaranteed forever.
*Carded, 2.0lb, 5pk
20610 3-1/2" Flooring/ Drywall Knife
Cut flooring and drywall material. High-carbon cutlery steel blade is hardened, tempered and honed. Fiber finish hardwood handle.
*Carded, 2.0lb, 10pk
20450 2-1/2" Long-Point Vinyl Knife
Cut soft and hard core vinyl and floor covering. 2-1/2" long-point high-carbon cutlery steel blade; hardened, tempered and honed. Hardwood handle.
*Carded, 1.5lb, 5pk
20350 2-1/2" Long-Point Flooring/Drywall Knife
Cut floor covering and drywall material. High-carbon cutlery steel blade; hardened, tempered, and honed. Fiber finish hardwood handle.
*Carded, 1.3lb, 5pk
20200 2-1/2" Long-Point Flooring Knife
Cut floor covering and drywall material. High-carbon cutlery steel blade; hardened, tempered and honed. Hardwood handle.
*Carded, 1.1lb, 5pk
20250 2-1/2" Short-Point Flooring Knife
Cut floor covering and drywall material. High-carbon cutlery steel blade; hardened, tempered and honed. Hardwood handle.
*Carded, 1.1lb, 5pk
54020 2-5/8" 2HB Hawkbill Carpet Knife
Hardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted and locked in place with a strong nickel-plated ferrule. Trims carpet in corners, around pipes and doors.
*Carded, 1.0lb, 10pk
54040 3-1/8" 4HB Hawkbill Carpet Knife
Hardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted and locked in place with a strong nickel-plated ferrule. Trims carpet in corners, around pipes and doors.
*Carded, 1.0lb, 10pk
42095 Adjustable Blade Carpet Knife
Cut carpet, upholstery and heavy fabrics. Fully adjustable blade retracts for safety. Offset head for leverage. High-impact plastic. reversible blades with 4 cutting edges. Change blade without tools. 6 blades included.
*Carded, 0.8lb, 5pk
42105 Carpet Knife Blades 5 Pack
Blued-style carpet blades fit HYDE® #42095 carpet knife.
*Carded, 0.5lb, 10pk
42129 Carpet Knife Blades 100 Pack
Blued-style carpet blades fit HYDE® #42095 carpet knife.
*Boxed, 0.8lb, 1pk
42700 Hook Knife Sheath
Heavy-duty top grain leather sheath with curved design to hold most linoleum and other hook-style bladed knives. Snap button strap holds knives securely in sheath.
*Carded, 1.3lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
5756
KNIVES & BLADES
42030 Auto-Lock 18mm Snap-Off Blade Utility Knife
3 blades included, with 8 sharp points per blade; plus built-in blade breaker. 2-blade storage in handle. retractable blade with one-piece positive lock. High- impact polystyrene with stainless steel blade track.
*Carded, 2.0lb, 10pk
42047 18mm Snap-Off Blade Utility Knife
1 blade included, with 8 sharp points per blade; plus built-in blade breaker. retractable blade with 2-piece positive lock. High-impact polystyrene.
*Carded, 1.2lb, 10pk
18mm Snap-Off Replacement BladesFor use with HYDE® #42048, #42030, #42047 and most other 18mm knives. 8 points per blade.
42330 18mm Snap-Off Blades 5 Pack*Carded, 0.8lb, 10pk
42355 18mm Snap-Off Blades 10-Blade Dispenser
reusable dispenser with hang hole holds 10 blades.
*Carded, 1.9lb, 10pk
42357 18mm Snap-Off Blades 10-Blade Dispenser with Used Blade Storage
reusable dispenser with hang hole holds 10 blades. Used blade storage for safe disposal.
*Carded, 2.7lb, 10pk
42359 18mm Snap-Off Blades 50-Blade Dispenser
reusable dispenser with hang hole holds 50 blades.
*Carded, 8.5lb, 10pk
42049 18mm Snap-Off Blades 5-Blade AutoLoad Replacement Magazine
replacement magazine with 5 18mm blades for use with HYDE® #42048 auto-load utility knife. 8 sharp points per blade.
*Carded, 1.3lb, 10pk
9mm Snap-Off Utility Knives
42027 MAXXGRIP® 9mm Snap-Off Blade Utility Knife
3 blades included, with 13 sharp points per blade; plus built-in blade breaker. 2-blade storage in handle. Cushioned body for sure grip. Stainless steel blade track lets you reverse the blade for left- or right-hand use. retractable blade with 1-piece positive lock.
*Carded, 1.3lb, 10pk
42045 Auto-Lock 9mm Snap-Off Blade Utility Knife
3 blades included, with 13 sharp points per blade; plus built-in blade breaker. 2-blade storage in handle. retractable blade with 1-piece positive lock. High-impact polystyrene with stainless steel blade track.
*Carded, 0.9lb, 10pk
42032 Metal 9mm Snap-Off Blade Utility Knife
3 blades included with 13 sharp points per blade; plus built-in blade breaker. retractable blade with push-button control. Silver metal body with pocket clip.
*Carded, 0.8lb, 10pk
42035 9mm Snap-Off Blade Utility Knife
1 blade included, with 13 sharp points per blade; plus built-in blade breaker. retractable blade with 2-piece positive lock. High-impact polystyrene.
*Carded, 0.5lb, 10pk
42036 Economy 9mm Snap-Off Blade Utility Knife
1 blade included, with 13 sharp points per blade; plus built-in blade breaker. retractable blade with 2-piece positive lock. High-impact polystyrene.
*Carded, 0.5lb, 10pk
9mm Snap-Off Replacement BladesFor use with HYDE® #42027, #42032, #42035, #42036 #42045 and most other 9mm knives. 13 points per blade.
42345 9mm Snap-Off Blades 5 Pack*Carded, 1.1lb, 10pk
42356 9mm Snap-Off Blades 10-Blade Dispenser with Used Blade Storage
reusable dispenser with hang hole. Used blade storage for safe disposal.
*Carded, 1.1lb, 10pk
42358 9mm Snap-Off Blades 100-Blade Dispenser
reusable dispenser with hang hole.
*Carded, 6.0lb, 10pk
Roofing & Flooring Trade Knives
22320 Black & Silver® Roofing Knife
Stiff, high-carbon steel blade to score and cut roofing and drywall or pry apart asphalt shingles. Guaranteed forever.
*Carded, 0.8lb, 5pk
20550 Black & Silver® Flooring/Roofing Knife
Cutting tool for ceilings, drywall, floor covering, roofing. Heavy- duty .072" chrome vanadium steel blade. 5° offset angle for cutting leverage. Hollow ground to reduce binding. Soft-grip handle with finger guard. Guaranteed forever.
*Carded, 1.5lb, 5pk
22310 2" Short-Point Roofing Knife
Cut roofing and drywall materials. High-carbon cutlery steel blade hardened, tempered and honed. Hardwood handle.
*Carded, 0.9lb, 10pk
20600 Black & Silver® Hose Cutter/All-Purpose Trade Knife
Cutting tool for professional trades: automotive, ceilings, drywall, floor covering, roofing and more. Extra heavy-duty .072"-thick 440 series stainless steel blade. 5° offset blade angle for cutting leverage. Serrated blade area. Soft-grip handle. Guaranteed forever.
*Carded, 2.0lb, 5pk
20610 3-1/2" Flooring/ Drywall Knife
Cut flooring and drywall material. High-carbon cutlery steel blade is hardened, tempered and honed. Fiber finish hardwood handle.
*Carded, 2.0lb, 10pk
20450 2-1/2" Long-Point Vinyl Knife
Cut soft and hard core vinyl and floor covering. 2-1/2" long-point high-carbon cutlery steel blade; hardened, tempered and honed. Hardwood handle.
*Carded, 1.5lb, 5pk
20350 2-1/2" Long-Point Flooring/Drywall Knife
Cut floor covering and drywall material. High-carbon cutlery steel blade; hardened, tempered, and honed. Fiber finish hardwood handle.
*Carded, 1.3lb, 5pk
20200 2-1/2" Long-Point Flooring Knife
Cut floor covering and drywall material. High-carbon cutlery steel blade; hardened, tempered and honed. Hardwood handle.
*Carded, 1.1lb, 5pk
20250 2-1/2" Short-Point Flooring Knife
Cut floor covering and drywall material. High-carbon cutlery steel blade; hardened, tempered and honed. Hardwood handle.
*Carded, 1.1lb, 5pk
54020 2-5/8" 2HB Hawkbill Carpet Knife
Hardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted and locked in place with a strong nickel-plated ferrule. Trims carpet in corners, around pipes and doors.
*Carded, 1.0lb, 10pk
54040 3-1/8" 4HB Hawkbill Carpet Knife
Hardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted and locked in place with a strong nickel-plated ferrule. Trims carpet in corners, around pipes and doors.
*Carded, 1.0lb, 10pk
42095 Adjustable Blade Carpet Knife
Cut carpet, upholstery and heavy fabrics. Fully adjustable blade retracts for safety. Offset head for leverage. High-impact plastic. reversible blades with 4 cutting edges. Change blade without tools. 6 blades included.
*Carded, 0.8lb, 5pk
42105 Carpet Knife Blades 5 Pack
Blued-style carpet blades fit HYDE® #42095 carpet knife.
*Carded, 0.5lb, 10pk
42129 Carpet Knife Blades 100 Pack
Blued-style carpet blades fit HYDE® #42095 carpet knife.
*Boxed, 0.8lb, 1pk
42700 Hook Knife Sheath
Heavy-duty top grain leather sheath with curved design to hold most linoleum and other hook-style bladed knives. Snap button strap holds knives securely in sheath.
*Carded, 1.3lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
5958
KNIVES & BLADES Trade Knives
60118 Black & Silver® Square Point Insulation Knife
1" wide, 14-gauge chrome vanadium steel blade. Wave blade design cuts foam core and most other insulation materials without binding. Ergonomically engineered soft-grip handle. Guaranteed forever. Blade measures 8-3/4"x1"x.083".
*Carded, 3.2lb, 10pk
90600 Cable Knife 405
13-gauge blade with hard-wood handle. Fiber rivet with internal ferrule. Blade measures 3-1/4"x7/8"x.072".
*Carded, 1.0lb, 10pk
40210 Hacking Knife
rugged 1-1/4"-wide blade for general-purpose cutting. Leather handle with triple-riveted construction. 4-1/4" blade length.
*Carded, 3.0lb, 10pk
40310 Potter’s Knife
High-carbon 4-1/2" steel knife for pottery and ceramic work. Hardwood handle.
*Carded, 1.0lb, 10pk
Sloyd Wood Carving KnivesExtra-sharp high-carbon steel knife for woodcarving and general purpose cutting. Hardwood handles.
40060 2-5/8" Sloyd Wood Carving Knife*Carded, 0.9lb, 10pk
40160 3-1/8" Sloyd Knife*Uncarded, 1.2lb, 10pk
Square Point Knives
Hardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Soft-grip handle with built-in finger guard to protect fingers from cuts. Guaranteed forever.
Black & Silver® Square Point KnivesHardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted and locked in place with a strong nickel-plated ferrule.
60102 Black & Silver® 15-Gauge 4"x1"x.072" Square Point Knife*Carded, 2.8lb, 10pk
60110 Black & Silver® 15-Gauge 6"x1"x.072" Square Point Knife*Carded, 3.0lb, 10pk
60115 Black & Silver® 15-Gauge 8"x1"x.072" Square Point Knife*Carded, 3.2lb, 10pk
Hardwood Handle Square Point Knives
50050 17-Gauge 2-3/4"x3/4"x.058" Square Point Knife #1*Carded, 1.0lb, 10pk
50100 17-Gauge 3"x11/16"x.058" Square Point Knife #2*Carded, 1.0lb, 10pk
50200 17-Gauge 3-1/2"x3/4"x.058" Square Point Knife #3*Carded, 1.0lb, 10pk
50350 16-Gauge 3-7/8"x3/4"x.065" Square Point Knife #4*Carded, 1.1lb, 10pk
50400 16-Gauge 3-7/8"x3/4"x.065" Square Point Knife #4 with Flat Handle*Carded, 1.0lb, 10pk
50450 16-Gauge 4-3/8"x7/8"x.065" Square Point Knife #5*Carded, 1.3lb, 10pk
50500 17-Gauge 5"x1"x.085" Square Point Knife #6*Carded, 1.4lb, 10pk
60030 16-Gauge 2-3/4"x1"x.065" Regular Square Point Knife*Carded, 1.3lb, 10pk
60450 14-Gauge 4"x1"x.083" Regular Square Point Knife*Carded, 1.5lb, 10pk
60090 16-Gauge 4"x1"x.065" Regular Square Point Knife*Carded, 1.4lb, 10pk
60570 16-Gauge 5"x1"x.065" Regular Square Point Knife*Carded, 1.5lb, 10pk
60630 16-Gauge 6"x1"x.065" Regular Square Point Knife
*Carded, 1.7lb, 10pk
60780 14-Gauge 8"x1"x.083" Regular Square Point Knife*Carded, 2.5lb, 10pk
Hollow Ground Square Point KnivesHardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted and locked in place with a strong nickel-plated ferrule. Hollow grind works for cutting dense materials like foam.
60480 14-Gauge 4"x1"x.083" Hollow Ground Square Point Knife BG142*Carded, 1.5lb, 10pk
60180 16-Gauge 4"x1"x.065" Hollow Ground Square Point Knife*Carded, 1.5lb, 10pk
60720 16-Gauge 6"x1"x.065" Hollow Ground Square Point Knife BG145*Carded, 1.5lb, 10pk
60750 16-Gauge 6"x1"x.065" Hollow Ground Square Point Knife BG352*Carded, 1.5lb, 10pk
Square Point Knives with Safety HandleHardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted and locked in place with a strong nickel-plated ferrule. Safety guard protects fingers.
60510 14-Gauge 4"x1"x.083" Square Point Safety Knife*Carded, 1.8lb, 10pk
60120 16-Gauge 4"x1"x.065" Square Point Safety Knife*Carded, 1.5lb, 10pk
60600 16-Gauge 5"x1"x.065" Square Point Safety Knife*Carded, 1.5lb, 10pk
60660 16-Gauge 6"x1"x.065" Square Point Safety Knife*Carded, 1.8lb, 10pk
60810 14-Gauge 8"x1"x.083" Square Point Safety Knife*Carded, 2.5lb, 10pk
Industrial Knife HolstersHeavy-duty simulated leather with rivet-reinforced stitched construc-tion. accepts knives with straight blades up to 6" long.
56500 Industrial Knife Belt Sheath*Carded, 1.3lb, 10pk
56505 Industrial Knife Belt Sheath with Snap
Belt slots with snap fastener.
*Carded, 1.5lb, 10pk
Butcher KnivesHigh-carbon steel blades; hard-ened, tempered, ground and honed. Blade is triple riveted to comfortable hardwood handle.
68300 14" Safety Butcher Knife 314
round end protects workers’ feet from accidental drops. Heavy steel shield protects fingers. Sharp, semi-hollow ground 12-gauge blade measures 14"x1-3/4" x.109".
*Carded, 6.0lb, 5pk
68030 6" Butcher Knife 506 Heavy Duty 15-Gauge Blade
For the toughest cutting jobs. Blade measures 6"x1-1/5"x.072".
*Carded, 1.8lb, 5pk
68060 8" Butcher Knife 508 Heavy Duty 15-Gauge Blade
For the toughest cutting jobs. Blade measures 8"x1"x.072".
*Carded, 2.0lb, 5pk
68090 10" Butcher Knife 510 Heavy Duty 13-Gauge Blade
For the toughest cutting jobs. Blade measures 10"x1-5/8"x.095".
*Carded, 3.0lb, 5pk
68120 12" Butcher Knife 512 Heavy Duty 13-Gauge Blade
For the toughest cutting jobs. Blade measures 12"x1-5/8"x.095".
*Carded, 3.8lb, 5pk
68180 14" Butcher Knife with Guard 514 Heavy Duty 12-Gauge Blade
Flat ground, triple riveted to hardwood handle. Blade measures 14"x1-7/8"x.109".
*Carded, 5.3lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
5958
KNIVES & BLADES Trade Knives
60118 Black & Silver® Square Point Insulation Knife
1" wide, 14-gauge chrome vanadium steel blade. Wave blade design cuts foam core and most other insulation materials without binding. Ergonomically engineered soft-grip handle. Guaranteed forever. Blade measures 8-3/4"x1"x.083".
*Carded, 3.2lb, 10pk
90600 Cable Knife 405
13-gauge blade with hard-wood handle. Fiber rivet with internal ferrule. Blade measures 3-1/4"x7/8"x.072".
*Carded, 1.0lb, 10pk
40210 Hacking Knife
rugged 1-1/4"-wide blade for general-purpose cutting. Leather handle with triple-riveted construction. 4-1/4" blade length.
*Carded, 3.0lb, 10pk
40310 Potter’s Knife
High-carbon 4-1/2" steel knife for pottery and ceramic work. Hardwood handle.
*Carded, 1.0lb, 10pk
Sloyd Wood Carving KnivesExtra-sharp high-carbon steel knife for woodcarving and general purpose cutting. Hardwood handles.
40060 2-5/8" Sloyd Wood Carving Knife*Carded, 0.9lb, 10pk
40160 3-1/8" Sloyd Knife*Uncarded, 1.2lb, 10pk
Square Point Knives
Hardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Soft-grip handle with built-in finger guard to protect fingers from cuts. Guaranteed forever.
Black & Silver® Square Point KnivesHardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted and locked in place with a strong nickel-plated ferrule.
60102 Black & Silver® 15-Gauge 4"x1"x.072" Square Point Knife*Carded, 2.8lb, 10pk
60110 Black & Silver® 15-Gauge 6"x1"x.072" Square Point Knife*Carded, 3.0lb, 10pk
60115 Black & Silver® 15-Gauge 8"x1"x.072" Square Point Knife*Carded, 3.2lb, 10pk
Hardwood Handle Square Point Knives
50050 17-Gauge 2-3/4"x3/4"x.058" Square Point Knife #1*Carded, 1.0lb, 10pk
50100 17-Gauge 3"x11/16"x.058" Square Point Knife #2*Carded, 1.0lb, 10pk
50200 17-Gauge 3-1/2"x3/4"x.058" Square Point Knife #3*Carded, 1.0lb, 10pk
50350 16-Gauge 3-7/8"x3/4"x.065" Square Point Knife #4*Carded, 1.1lb, 10pk
50400 16-Gauge 3-7/8"x3/4"x.065" Square Point Knife #4 with Flat Handle*Carded, 1.0lb, 10pk
50450 16-Gauge 4-3/8"x7/8"x.065" Square Point Knife #5*Carded, 1.3lb, 10pk
50500 17-Gauge 5"x1"x.085" Square Point Knife #6*Carded, 1.4lb, 10pk
60030 16-Gauge 2-3/4"x1"x.065" Regular Square Point Knife*Carded, 1.3lb, 10pk
60450 14-Gauge 4"x1"x.083" Regular Square Point Knife*Carded, 1.5lb, 10pk
60090 16-Gauge 4"x1"x.065" Regular Square Point Knife*Carded, 1.4lb, 10pk
60570 16-Gauge 5"x1"x.065" Regular Square Point Knife*Carded, 1.5lb, 10pk
60630 16-Gauge 6"x1"x.065" Regular Square Point Knife
*Carded, 1.7lb, 10pk
60780 14-Gauge 8"x1"x.083" Regular Square Point Knife*Carded, 2.5lb, 10pk
Hollow Ground Square Point KnivesHardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted and locked in place with a strong nickel-plated ferrule. Hollow grind works for cutting dense materials like foam.
60480 14-Gauge 4"x1"x.083" Hollow Ground Square Point Knife BG142*Carded, 1.5lb, 10pk
60180 16-Gauge 4"x1"x.065" Hollow Ground Square Point Knife*Carded, 1.5lb, 10pk
60720 16-Gauge 6"x1"x.065" Hollow Ground Square Point Knife BG145*Carded, 1.5lb, 10pk
60750 16-Gauge 6"x1"x.065" Hollow Ground Square Point Knife BG352*Carded, 1.5lb, 10pk
Square Point Knives with Safety HandleHardened high-carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted and locked in place with a strong nickel-plated ferrule. Safety guard protects fingers.
60510 14-Gauge 4"x1"x.083" Square Point Safety Knife*Carded, 1.8lb, 10pk
60120 16-Gauge 4"x1"x.065" Square Point Safety Knife*Carded, 1.5lb, 10pk
60600 16-Gauge 5"x1"x.065" Square Point Safety Knife*Carded, 1.5lb, 10pk
60660 16-Gauge 6"x1"x.065" Square Point Safety Knife*Carded, 1.8lb, 10pk
60810 14-Gauge 8"x1"x.083" Square Point Safety Knife*Carded, 2.5lb, 10pk
Industrial Knife HolstersHeavy-duty simulated leather with rivet-reinforced stitched construc-tion. accepts knives with straight blades up to 6" long.
56500 Industrial Knife Belt Sheath*Carded, 1.3lb, 10pk
56505 Industrial Knife Belt Sheath with Snap
Belt slots with snap fastener.
*Carded, 1.5lb, 10pk
Butcher KnivesHigh-carbon steel blades; hard-ened, tempered, ground and honed. Blade is triple riveted to comfortable hardwood handle.
68300 14" Safety Butcher Knife 314
round end protects workers’ feet from accidental drops. Heavy steel shield protects fingers. Sharp, semi-hollow ground 12-gauge blade measures 14"x1-3/4" x.109".
*Carded, 6.0lb, 5pk
68030 6" Butcher Knife 506 Heavy Duty 15-Gauge Blade
For the toughest cutting jobs. Blade measures 6"x1-1/5"x.072".
*Carded, 1.8lb, 5pk
68060 8" Butcher Knife 508 Heavy Duty 15-Gauge Blade
For the toughest cutting jobs. Blade measures 8"x1"x.072".
*Carded, 2.0lb, 5pk
68090 10" Butcher Knife 510 Heavy Duty 13-Gauge Blade
For the toughest cutting jobs. Blade measures 10"x1-5/8"x.095".
*Carded, 3.0lb, 5pk
68120 12" Butcher Knife 512 Heavy Duty 13-Gauge Blade
For the toughest cutting jobs. Blade measures 12"x1-5/8"x.095".
*Carded, 3.8lb, 5pk
68180 14" Butcher Knife with Guard 514 Heavy Duty 12-Gauge Blade
Flat ground, triple riveted to hardwood handle. Blade measures 14"x1-7/8"x.109".
*Carded, 5.3lb, 5pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
6160
KNIVES & BLADES Specialized Mill Knives
Hardened high-carbon chrome vanadium steel blade, ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted in place with compression cutlery rivets.
61770 14-Gauge 4"x1-1/4"x.083" Heavy Duty Mill Knife H404
Used for heavy-duty applications.
*Carded, 2.0lb, 10pk
60870 14-Gauge 8"x1"x.083" Special Square Point Knife BG50
Smooth 7" hardwood handle.
*Carded, 4.0lb, 10pk
Trade Knives
Hardened high-carbon chrome vanadium steel blade, ground and tempered to precise tolerances. Blade is securely riveted and locked in place with a strong nickel-plated ferrule. Smooth hardwood handle.
60300 16-Gauge 4"x1"x.065" Bevel Point Knife BG268*Carded, 1.5lb, 10pk
61080 14-Gauge 2"x1"x.083" Heavy Duty Utility Bevel Point Knife BG268
For heavy-duty applications.
*Carded, 1.3lb, 10pk
61260 16-Gauge 4"x11/16"x.065" Taper Point Knife H2T
Sharp, thin blade to ream out ragged cuts in tire casings.
*Carded, 1.0lb, 10pk
55000 17-Gauge 3-1/4"x9/16"x.058" Sharp Point Knife #1*Carded, 1.0lb, 10pk
55050 17-Gauge 3-3/4"x5/8"x.058" Sharp Point Knife #2*Carded, 1.0lb, 10pk
55300
17-Gauge 3-1/4"x9/16"x.058" Paris Curve Knife #1
*Carded, 1.0lb, 10pk
55170 19-Gauge 5-1/8"x5/8"x.042" Thin Skiver Round Point Knife*Carded, 1.1lb, 10pk
55190 15-Gauge 6-3/4"x1"x.072" Leather Skiver Knife #3 Sole*Carded, 1.8lb, 10pk
53360 15-Gauge 2-3/4"x3/4"x.072" McKay Stitcher Knife (A)*Carded, 1.0lb, 10pk
53300 17-Gauge 2-1/8"x5/8"x.058" McKay Stitcher Knife (B)*Carded, 0.9lb, 10pk
55500 17-Gauge 4-2/8"x7/8"x.058" English Shoe Knife #2*Carded, 1.0lb, 10pk
61350 19-Gauge 4"x13/16"x.042" Flexible Skiver Knife K770
Flexible blade designed to cut rough spots in tire casings.
*Carded, 1.0lb, 10pk
66030 16-Gauge 3-1/2"x3/4"x.065" Straight V-Trim Curved Tip Knife H212*Carded, 1.3lb, 10pk
66060 16-Gauge 4"x1"x.065" Straight V-Trim Knife 213*Carded, 1.5lb, 10pk
66090 16-Gauge 3-1/2"x3/4"x.065" Offset V-Trim Knife H222
Trim large mold flush from plastic and rubber goods.
*Carded, 1.5lb, 10pk
66330 16-Gauge 3-15/16"x11/16"x.065" Straight V-Trim Knife 3787A*Carded, 1.3lb, 10pk
65060 16-Gauge 5"x1"x.065" Offset Pin Vent Trimmer Knife H1357
Offset blade has 5 sharp grooves.
*Carded, 1.7lb, 10pk
67090 14-Gauge 3-3/8"x5/16"x.083" Hook Knife BG39A
Sharp V-ground hook.
*Carded, 1.9lb, 10pk
67150 14-Gauge 4"x9/16"x.083" Hook Knife BG101*Carded, 1.3lb, 10pk
67830 16-Gauge 3-1/8"x1/2"x.065" Straight Single Ply Knife K422, .062" Notch
Prodder knives with hand-filed notches.
*Carded, 1.0lb, 10pk
Industrial Mill Blade Handles
MAXXGRIP PRO® Industrial Mill Blade HandlesLightweight die cast alloy body construction. Ergonomically engineered soft-grip handle fits your hand for less user fatigue. Cushioned to absorb shock and perform comfortably during extend-ed use. Slotted set screw length adjustment.
63055 MAXXGRIP PRO® Mill Blade Handle for 9/16" and 5/8" Blades*Carded, 2.3lb, 10pk
63085 MAXXGRIP PRO® Mill Blade Handle for 5/8" and 3/4" Blades*Carded, 2.3lb, 10pk
63175 MAXXGRIP PRO® Mill Blade Handle for 3/8" Blade*Carded, 2.3lb, 10pk
Wood/Aluminum Industrial Mill Blade HandlesFlat-sided hardwood handles for 5/16" and 3/8" mill blades.
63080 Wood/Aluminum 2108 Mill Blade Handle for 3/4" Blade*Carded, 1.5lb, 10pk
\
63170 Wood/Aluminum BG15 Mill Blade Handle for 3/8" Blade*Carded, 1.5lb, 10pk
Wood Extension Blade HandlesFlat-sided hardwood handles for 5/16" and 3/8" mill blades.
57620 (1R) 5-1/4" Flat-sided Wood Extension Blade Handle*Carded, 1.5lb, 10pk
57630 (2SR) 4-1/2" Flat-sided Wood Extension Blade Handle*Carded, 1.3lb, 10pk
57660 (12LR) 4-3/4" Flat-sided Wood Extension Blade Handle*Carded, 1.5lb, 10pk
57680 (2L) 4-3/4" Flat-sided Wood Extension Blade Handle*Carded, 1.3lb, 10pk
Mill BladesHigh-carbon chrome vanadium steel blade. Hardened, tempered, ground and honed to precise tolerances for every cutting job.
57060 20-Gauge 4-3/4"x3/8"x.035" Bevel Point Extension Blade #2*Carded, 0.3lb, 10pk
57090 18-Gauge 4-3/4"x3/8"x.049" Bevel Point Extension Blade #2*Carded, 0.3lb, 10pk
57170 18-Gauge 4-3/4"x3/8"x.049" Bevel Point Extension Blade BG349*Carded, 0.5lb, 10pk
57200 18-Gauge 4-3/4"x3/8"x.049" Bevel Point HSS Steel Extension Blade #2
Best steel for high heat and tough cutting applications.
*Carded, 0.3lb, 10pk
57230 18-Gauge 4-3/4"x3/8"x.049" Bevel Point HSS Steel Extension Blade 6522M
Best steel for high heat and tough cutting applications.
*Carded, 0.5lb, 10pk
57320 20-Gauge 4-3/4"x3/8"x.035" Curve Point Extension Blade #1*Carded, 0.3lb, 10pk
57380 20-Gauge 4-4/3"x3/8"x.035" Curve Point Extension Blade #2*Carded, 0.3lb, 10pk
57470 18-Gauge 4-4/3"x3/8"x.049" Sharp Point Extension Blade #2*Carded, 0.5lb, 10pk
57600 18-Gauge 4-4/3"x3/8"x.049" Lance Point Extension Blade #2*Carded, 0.5lb, 10pk
62030 16-Gauge 6"x9/16"x.065" Flat Grind Mill Blade 080*Carded, 0.5lb, 10pk
62090 15-Gauge 6"x5/8"x.072" Flat Grind Mill Blade 081*Carded, 1.0lb, 10pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
6160
KNIVES & BLADES Specialized Mill Knives
Hardened high-carbon chrome vanadium steel blade, ground and tempered to precise tolerances. Smooth hardwood handle. Blade is securely riveted in place with compression cutlery rivets.
61770 14-Gauge 4"x1-1/4"x.083" Heavy Duty Mill Knife H404
Used for heavy-duty applications.
*Carded, 2.0lb, 10pk
60870 14-Gauge 8"x1"x.083" Special Square Point Knife BG50
Smooth 7" hardwood handle.
*Carded, 4.0lb, 10pk
Trade Knives
Hardened high-carbon chrome vanadium steel blade, ground and tempered to precise tolerances. Blade is securely riveted and locked in place with a strong nickel-plated ferrule. Smooth hardwood handle.
60300 16-Gauge 4"x1"x.065" Bevel Point Knife BG268*Carded, 1.5lb, 10pk
61080 14-Gauge 2"x1"x.083" Heavy Duty Utility Bevel Point Knife BG268
For heavy-duty applications.
*Carded, 1.3lb, 10pk
61260 16-Gauge 4"x11/16"x.065" Taper Point Knife H2T
Sharp, thin blade to ream out ragged cuts in tire casings.
*Carded, 1.0lb, 10pk
55000 17-Gauge 3-1/4"x9/16"x.058" Sharp Point Knife #1*Carded, 1.0lb, 10pk
55050 17-Gauge 3-3/4"x5/8"x.058" Sharp Point Knife #2*Carded, 1.0lb, 10pk
55300
17-Gauge 3-1/4"x9/16"x.058" Paris Curve Knife #1
*Carded, 1.0lb, 10pk
55170 19-Gauge 5-1/8"x5/8"x.042" Thin Skiver Round Point Knife*Carded, 1.1lb, 10pk
55190 15-Gauge 6-3/4"x1"x.072" Leather Skiver Knife #3 Sole*Carded, 1.8lb, 10pk
53360 15-Gauge 2-3/4"x3/4"x.072" McKay Stitcher Knife (A)*Carded, 1.0lb, 10pk
53300 17-Gauge 2-1/8"x5/8"x.058" McKay Stitcher Knife (B)*Carded, 0.9lb, 10pk
55500 17-Gauge 4-2/8"x7/8"x.058" English Shoe Knife #2*Carded, 1.0lb, 10pk
61350 19-Gauge 4"x13/16"x.042" Flexible Skiver Knife K770
Flexible blade designed to cut rough spots in tire casings.
*Carded, 1.0lb, 10pk
66030 16-Gauge 3-1/2"x3/4"x.065" Straight V-Trim Curved Tip Knife H212*Carded, 1.3lb, 10pk
66060 16-Gauge 4"x1"x.065" Straight V-Trim Knife 213*Carded, 1.5lb, 10pk
66090 16-Gauge 3-1/2"x3/4"x.065" Offset V-Trim Knife H222
Trim large mold flush from plastic and rubber goods.
*Carded, 1.5lb, 10pk
66330 16-Gauge 3-15/16"x11/16"x.065" Straight V-Trim Knife 3787A*Carded, 1.3lb, 10pk
65060 16-Gauge 5"x1"x.065" Offset Pin Vent Trimmer Knife H1357
Offset blade has 5 sharp grooves.
*Carded, 1.7lb, 10pk
67090 14-Gauge 3-3/8"x5/16"x.083" Hook Knife BG39A
Sharp V-ground hook.
*Carded, 1.9lb, 10pk
67150 14-Gauge 4"x9/16"x.083" Hook Knife BG101*Carded, 1.3lb, 10pk
67830 16-Gauge 3-1/8"x1/2"x.065" Straight Single Ply Knife K422, .062" Notch
Prodder knives with hand-filed notches.
*Carded, 1.0lb, 10pk
Industrial Mill Blade Handles
MAXXGRIP PRO® Industrial Mill Blade HandlesLightweight die cast alloy body construction. Ergonomically engineered soft-grip handle fits your hand for less user fatigue. Cushioned to absorb shock and perform comfortably during extend-ed use. Slotted set screw length adjustment.
63055 MAXXGRIP PRO® Mill Blade Handle for 9/16" and 5/8" Blades*Carded, 2.3lb, 10pk
63085 MAXXGRIP PRO® Mill Blade Handle for 5/8" and 3/4" Blades*Carded, 2.3lb, 10pk
63175 MAXXGRIP PRO® Mill Blade Handle for 3/8" Blade*Carded, 2.3lb, 10pk
Wood/Aluminum Industrial Mill Blade HandlesFlat-sided hardwood handles for 5/16" and 3/8" mill blades.
63080 Wood/Aluminum 2108 Mill Blade Handle for 3/4" Blade*Carded, 1.5lb, 10pk
\
63170 Wood/Aluminum BG15 Mill Blade Handle for 3/8" Blade*Carded, 1.5lb, 10pk
Wood Extension Blade HandlesFlat-sided hardwood handles for 5/16" and 3/8" mill blades.
57620 (1R) 5-1/4" Flat-sided Wood Extension Blade Handle*Carded, 1.5lb, 10pk
57630 (2SR) 4-1/2" Flat-sided Wood Extension Blade Handle*Carded, 1.3lb, 10pk
57660 (12LR) 4-3/4" Flat-sided Wood Extension Blade Handle*Carded, 1.5lb, 10pk
57680 (2L) 4-3/4" Flat-sided Wood Extension Blade Handle*Carded, 1.3lb, 10pk
Mill BladesHigh-carbon chrome vanadium steel blade. Hardened, tempered, ground and honed to precise tolerances for every cutting job.
57060 20-Gauge 4-3/4"x3/8"x.035" Bevel Point Extension Blade #2*Carded, 0.3lb, 10pk
57090 18-Gauge 4-3/4"x3/8"x.049" Bevel Point Extension Blade #2*Carded, 0.3lb, 10pk
57170 18-Gauge 4-3/4"x3/8"x.049" Bevel Point Extension Blade BG349*Carded, 0.5lb, 10pk
57200 18-Gauge 4-3/4"x3/8"x.049" Bevel Point HSS Steel Extension Blade #2
Best steel for high heat and tough cutting applications.
*Carded, 0.3lb, 10pk
57230 18-Gauge 4-3/4"x3/8"x.049" Bevel Point HSS Steel Extension Blade 6522M
Best steel for high heat and tough cutting applications.
*Carded, 0.5lb, 10pk
57320 20-Gauge 4-3/4"x3/8"x.035" Curve Point Extension Blade #1*Carded, 0.3lb, 10pk
57380 20-Gauge 4-4/3"x3/8"x.035" Curve Point Extension Blade #2*Carded, 0.3lb, 10pk
57470 18-Gauge 4-4/3"x3/8"x.049" Sharp Point Extension Blade #2*Carded, 0.5lb, 10pk
57600 18-Gauge 4-4/3"x3/8"x.049" Lance Point Extension Blade #2*Carded, 0.5lb, 10pk
62030 16-Gauge 6"x9/16"x.065" Flat Grind Mill Blade 080*Carded, 0.5lb, 10pk
62090 15-Gauge 6"x5/8"x.072" Flat Grind Mill Blade 081*Carded, 1.0lb, 10pk
Do it the HYDE® way at hydetools.com
*Retailer Pack Information
6362
01040 801140 801150 801240 801340 801440 801540 8, 3801550 8, 3801740 8, 3801750 8, 3801840 8, 3801850 8, 3801870 502000 802005 802050 802070 802080 1102100 902102 902150 902200 902205 802215 1102250 902300 902320 1102350 902352 902355 902400 902420 1102500 902550 9, 3902565 802568 902570 9, 3902600 9, 5302700 40
02701 4002750 9, 3902770 9, 3902850 9, 3902852 9, 3902870 9, 3902872 3902880 3902890 3902950 2302970 502975 602980 502990 3902995 3902996 4104060 1104101 1104124 4704126 4704151 1104352 1104401 1104701 11, 3904851 11, 3904971 605510 1105520 1105530 1205532 4705534 4705540 4005550 4005560 4005570 4005610 12, 3505615 12, 35, 4006081 1106101 10
06107 706108 606151 1006158 606221 1006222 1006228 706257 706258 606308 706321 1106351 1006357 706358 706401 1006408 706421 1106557 706571 10, 3906578 7, 3806579 7, 5306757 706771 10, 3906778 7, 3806857 706872 10, 3906878 7, 3806881 3806882 3806920 6, 3306971 606985 5, 3306986 506988 5, 3306992 606993 6, 3307010 1007060 1007110 10
07160 1007210 1007360 1007410 1007745 1007760 10, 3907860 10, 3907975 609003 4209004 4209005 4209007 3409008 3409012 4309014 4309016 35, 4109034 4109037 3509038 3509039 4109042 3509043 3509046 1909047 1809048 1809049 1809051 1809052 1809054 1809056 1809057 1909059 4509060 4309062 4209064 4309065 4209066 4509068 4109069 43
09071 4309072 4309073 4109074 4109075 4309077 4109081 4109082 1809083 1809086 4109090 4109105 4409110 4109114 4509157 1909158 4009160 1709165 1709170 1709175 1709211 3709212 3709213 3709214 3709215 3709223 3709227 3709233 3709237 3709243 3709244 3709247 3709248 3709253 3709257 3709263 3709267 3709273 3709274 37
09277 3709278 3709312 3609313 3609314 3609323 3609327 3609333 3609337 3609343 3609344 3609347 3609348 3609353 3609357 3609363 3609367 3609373 3609374 3609377 3609378 3609410 4009411 4009425 4009510 35, 4009880 4309885 4309886 4309891 4209892 4109893 4109898 3409899 3409902 1909903 3409904 3409905 1909906 1909909 19
INDEX KNIVES & BLADESDo it the HYDE® way at hydetools.com
62180
15-Gauge 9"x3/4"x.072" Flat Grind Mill Blade 086*Carded, 1.0lb, 10pk
62300
15-Gauge 6"x5/8"x.072" Flat Grind Mill Blade 087*Carded, 0.8lb, 10pk
62330
15-Gauge 6"x5/8"x.072" Flat Grind HSS Mill Blade 087*Carded, 0.5lb, 10pk
62360 15-Gauge 6"x5/8"x.072" Bevel Grind Mill Blade 087*Carded, 0.5lb, 10pk
62420 15-Gauge 6-1/2"x3/4"x.072" Flat Grind Mill Blade 088*Carded, 0.8lb, 10pk
62450 15-Gauge 6-1/2"x3/4"x.072" Flat Grind HSS Mill Blade 088*Carded, 0.8lb, 10pk
62460 15-Gauge 5"x3/4"x.072" Double End HSS Mill Blade
Double-ended blade for faster changeover to sharp blade.
*Carded, 0.5lb, 10pk
62480 15-Gauge 6"x3/4"x.072" Flat Grind Mill Blade 2607*Carded, 1.0lb, 10pk
62600 15-Gauge 6-1/2"x3/4"x.072" Bevel Grind HSS Mill Blade BG182M*Carded, 0.5lb, 10pk
62630 16-Gauge 6-1/2"x3/4"x.072" Bevel Grind HSS Mill Blade BG183M
*Carded, 0.3lb, 10pk
62660 15-Gauge 6-1/2"x3/4"x.072" Flat Grind Mill Blade BG20*Carded, 0.4lb, 10pk
62720
15-Gauge 6-1/2"x3/4"x.072" Flat Grind Mill Blade BG71A*Carded, .91lb, 10pk
62750 15-Gauge 6-1/2"x3/4"x.072" Bevel Grind Mill Blade BG57*Carded, .61lb, 10pk
62810
15-Gauge 6-3/8"x3/4"x.072" Flat Grind HSS Mill Blade
5532M
*Carded, 1.0lb, 10pk
62875
17-Gauge 5-1/2"x.690"x.058" Bevel Grind HSS Mill Blade 3551M*Carded, 0.5lb, 10pk
62900
15-Gauge 5-1/2"x.690"x.058" Bevel Grind HSS Mill Blade
3551M
*Carded, .91lb, 10pk
62930
12-Gauge 3-7/8"x9/16"x.109" Flat Grind HSS Mill Blade BG77M*Carded, 0.5lb, 10pk
63020
12-Gauge 3"x5/8"x.109" Flat Grind HSS Mill Blade 4546*Carded, 3.3lb, 100pk
67240
16-Gauge 6-3/8"x5/8"x.065" Hook Mill Blade BG448A*Carded, .316lb, 10pk
67390
20-Gauge 4"x3/8"x.035" Double End Hook Blade Extension Blade 6520*Carded, 0.3lb, 10pk
67450 22-Gauge High-Speed Steel 4"x3/8"x.035" Double End Hook Blade Extension Blade 4502M*Carded, 0.3lb, 10pk
66360
18-Gauge 5"x3/8"x.049" Double End V-Cut Trim Knife Blade BG391*Carded, .316lb, 10pk
Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s)
*Retailer Pack Information
6362
01040 801140 801150 801240 801340 801440 801540 8, 3801550 8, 3801740 8, 3801750 8, 3801840 8, 3801850 8, 3801870 502000 802005 802050 802070 802080 1102100 902102 902150 902200 902205 802215 1102250 902300 902320 1102350 902352 902355 902400 902420 1102500 902550 9, 3902565 802568 902570 9, 3902600 9, 5302700 40
02701 4002750 9, 3902770 9, 3902850 9, 3902852 9, 3902870 9, 3902872 3902880 3902890 3902950 2302970 502975 602980 502990 3902995 3902996 4104060 1104101 1104124 4704126 4704151 1104352 1104401 1104701 11, 3904851 11, 3904971 605510 1105520 1105530 1205532 4705534 4705540 4005550 4005560 4005570 4005610 12, 3505615 12, 35, 4006081 1106101 10
06107 706108 606151 1006158 606221 1006222 1006228 706257 706258 606308 706321 1106351 1006357 706358 706401 1006408 706421 1106557 706571 10, 3906578 7, 3806579 7, 5306757 706771 10, 3906778 7, 3806857 706872 10, 3906878 7, 3806881 3806882 3806920 6, 3306971 606985 5, 3306986 506988 5, 3306992 606993 6, 3307010 1007060 1007110 10
07160 1007210 1007360 1007410 1007745 1007760 10, 3907860 10, 3907975 609003 4209004 4209005 4209007 3409008 3409012 4309014 4309016 35, 4109034 4109037 3509038 3509039 4109042 3509043 3509046 1909047 1809048 1809049 1809051 1809052 1809054 1809056 1809057 1909059 4509060 4309062 4209064 4309065 4209066 4509068 4109069 43
09071 4309072 4309073 4109074 4109075 4309077 4109081 4109082 1809083 1809086 4109090 4109105 4409110 4109114 4509157 1909158 4009160 1709165 1709170 1709175 1709211 3709212 3709213 3709214 3709215 3709223 3709227 3709233 3709237 3709243 3709244 3709247 3709248 3709253 3709257 3709263 3709267 3709273 3709274 37
09277 3709278 3709312 3609313 3609314 3609323 3609327 3609333 3609337 3609343 3609344 3609347 3609348 3609353 3609357 3609363 3609367 3609373 3609374 3609377 3609378 3609410 4009411 4009425 4009510 35, 4009880 4309885 4309886 4309891 4209892 4109893 4109898 3409899 3409902 1909903 3409904 3409905 1909906 1909909 19
INDEX KNIVES & BLADESDo it the HYDE® way at hydetools.com
62180
15-Gauge 9"x3/4"x.072" Flat Grind Mill Blade 086*Carded, 1.0lb, 10pk
62300
15-Gauge 6"x5/8"x.072" Flat Grind Mill Blade 087*Carded, 0.8lb, 10pk
62330
15-Gauge 6"x5/8"x.072" Flat Grind HSS Mill Blade 087*Carded, 0.5lb, 10pk
62360 15-Gauge 6"x5/8"x.072" Bevel Grind Mill Blade 087*Carded, 0.5lb, 10pk
62420 15-Gauge 6-1/2"x3/4"x.072" Flat Grind Mill Blade 088*Carded, 0.8lb, 10pk
62450 15-Gauge 6-1/2"x3/4"x.072" Flat Grind HSS Mill Blade 088*Carded, 0.8lb, 10pk
62460 15-Gauge 5"x3/4"x.072" Double End HSS Mill Blade
Double-ended blade for faster changeover to sharp blade.
*Carded, 0.5lb, 10pk
62480 15-Gauge 6"x3/4"x.072" Flat Grind Mill Blade 2607*Carded, 1.0lb, 10pk
62600 15-Gauge 6-1/2"x3/4"x.072" Bevel Grind HSS Mill Blade BG182M*Carded, 0.5lb, 10pk
62630 16-Gauge 6-1/2"x3/4"x.072" Bevel Grind HSS Mill Blade BG183M
*Carded, 0.3lb, 10pk
62660 15-Gauge 6-1/2"x3/4"x.072" Flat Grind Mill Blade BG20*Carded, 0.4lb, 10pk
62720
15-Gauge 6-1/2"x3/4"x.072" Flat Grind Mill Blade BG71A*Carded, .91lb, 10pk
62750 15-Gauge 6-1/2"x3/4"x.072" Bevel Grind Mill Blade BG57*Carded, .61lb, 10pk
62810
15-Gauge 6-3/8"x3/4"x.072" Flat Grind HSS Mill Blade
5532M
*Carded, 1.0lb, 10pk
62875
17-Gauge 5-1/2"x.690"x.058" Bevel Grind HSS Mill Blade 3551M*Carded, 0.5lb, 10pk
62900
15-Gauge 5-1/2"x.690"x.058" Bevel Grind HSS Mill Blade
3551M
*Carded, .91lb, 10pk
62930
12-Gauge 3-7/8"x9/16"x.109" Flat Grind HSS Mill Blade BG77M*Carded, 0.5lb, 10pk
63020
12-Gauge 3"x5/8"x.109" Flat Grind HSS Mill Blade 4546*Carded, 3.3lb, 100pk
67240
16-Gauge 6-3/8"x5/8"x.065" Hook Mill Blade BG448A*Carded, .316lb, 10pk
67390
20-Gauge 4"x3/8"x.035" Double End Hook Blade Extension Blade 6520*Carded, 0.3lb, 10pk
67450 22-Gauge High-Speed Steel 4"x3/8"x.035" Double End Hook Blade Extension Blade 4502M*Carded, 0.3lb, 10pk
66360
18-Gauge 5"x3/8"x.049" Double End V-Cut Trim Knife Blade BG391*Carded, .316lb, 10pk
Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s)
*Retailer Pack Information
6564
INDEXDo it the HYDE® way at hydetools.com
09910 3409911 3409916 1909950 3809960 3809980 4309983 4109985 4109986 4109997 4309998 4310400 1410410 1410420 1410450 1410500 1210510 1210520 1210530 1310540 1310550 1310600 1210610 1210620 1211000 1311050 1311100 1311120 1311125 1311130 1311135 1311150 1311160 1211170 1211171 1211172 1211180 1211200 14
12000 14, 5012010 14, 5012040 1412050 14, 5012055 14, 5012060 14, 5012070 14, 5012072 14, 5013000 2213010 2213020 2213030 2213040 2213050 2213065 2213070 2213080 2213110 2313120 2313125 2313127 2313135 2313138 2313140 2313145 2318000 4418040 4418050 4418060 4418080 4418090 4418095 4418100 4418110 4418170 4418400 44, 4818520 3818550 38
18555 3818600 3818720 4419030 4619032 4619040 4619041 4619050 4619060 4619061 4619062 4619063 4619065 4619066 4619067 4619070 4619080 4719081 4719082 4719083 4719084 4719090 4719100 4719110 4719120 4719200 5119205 5119400 4719402 4819403 4819408 4719410 4719418 4719420 4719423 5019424 5119425 5119430 51
19440 5119450 5119451 5119452 5119453 5119600 4819620 4819640 4819660 4820200 50, 5720250 50, 5720350 50, 5720450 50, 5720550 50, 5720600 50, 5720610 50, 5722310 5722320 5728000 2928010 2928020 2928030 2928040 2928050 2928060 2928070 2928100 2928260 2928270 2928301 2728302 2728303 2728304 2728420 2728430 2728440 2728450 2728460 25
28470 2528600 2928670 2928680 2928690 2928700 2828710 2828715 2828720 2828730 2928735 2828740 2830100 5230120 5230122 5230160 5230250 5231550 5233095 5333100 5333110 5333120 5333150 5333170 5333210 5333250 22, 5333255 23, 5334015 5235600 5235789 5235805 5240060 5840160 5840210 5840310 5841010 3241060 3241110 32
42005 5542020 5442025 5442026 5442027 5642030 5642032 5642035 5642036 5642045 5642047 5642048 5542049 5642056 5542060 5542062 5542065 5542067 5542070 5442074 5442075 5442080 5442081 5442083 5442090 5442095 5042095 5742100 5442101 5442102 5542103 5442104 5442105 5742115 5442117 5442118 5542129 5742150 54
42200 5542250 5542330 5642345 5642355 5642356 5642357 5642358 5642359 5642500 5542520 5542525 5542700 5743420 3043430 3043460 3043470 3143510 3243600 4843605 4843610 4843615 4943620 4943630 4943640 4944240 3244250 3144280 3245000 3045005 3045042 3245050 3245110 3245115 3245160 3045161 3045200 3245310 19
45320 1945350 1945360 1945375 1945390 1945395 1945400 3545450 3545600 3245700 2345730 5545760 2345805 3045805 5245807 31, 5245808 5245810 3045810 5245820 3045850 3045945 3145950 3145960 3145965 3245970 3045980 3146310 4946400 4946410 4946420 4946435 4946445 3246455 3246482 4946484 4946540 4546555 4546560 45
46565 4546630 2246640 2246650 2246660 2246750 3246800 2146801 2146802 2146803 3246804 2146805 2146806 2146807 21, 4746809 21, 4546810 2146811 2146812 2146813 2146830 2046831 2046832 2046833 2046834 2046835 2046837 20, 4546838 20, 4546839 20, 4546840 20, 4546841 2046842 2046843 2046846 2146847 2146849 2146850 2247050 3247100 31
50050 5850100 5850200 5850350 5850400 5850450 5850500 5853300 6053360 6054020 5754040 5755000 6055050 6055170 6055190 6055300 6055500 6056500 5956505 5957060 6157090 6157170 6157200 6157230 6157320 6157380 6157470 6157600 6157620 (1R) 6157630 (2SR) 6157660 (12LR) 6157680 (2L) 6160030 5860090 5960102 5860110 5860115 5860118 58
60120 5960180 5960300 6060450 5860480 5960510 5960570 5960600 5960630 5960660 5960720 5960750 5960780 5960810 5960870 6061080 6061260 6061350 6061770 6062030 6162090 6162180 6262300 6262330 6262360 6262420 6262450 6262460 6262480 6262600 6262630 6262660 6262720 6262750 6262810 6262875 6262900 6262930 62
63020 6263055 6163080 6163085 6163170 6163175 6165060 6066030 6066060 6066090 6066330 6066360 6267090 6067150 6067240 6267390 6267450 6267830 6068030 5968060 5968090 5968120 5968180 5968300 5990600 58
Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s)Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s)
6564
INDEXDo it the HYDE® way at hydetools.com
09910 3409911 3409916 1909950 3809960 3809980 4309983 4109985 4109986 4109997 4309998 4310400 1410410 1410420 1410450 1410500 1210510 1210520 1210530 1310540 1310550 1310600 1210610 1210620 1211000 1311050 1311100 1311120 1311125 1311130 1311135 1311150 1311160 1211170 1211171 1211172 1211180 1211200 14
12000 14, 5012010 14, 5012040 1412050 14, 5012055 14, 5012060 14, 5012070 14, 5012072 14, 5013000 2213010 2213020 2213030 2213040 2213050 2213065 2213070 2213080 2213110 2313120 2313125 2313127 2313135 2313138 2313140 2313145 2318000 4418040 4418050 4418060 4418080 4418090 4418095 4418100 4418110 4418170 4418400 44, 4818520 3818550 38
18555 3818600 3818720 4419030 4619032 4619040 4619041 4619050 4619060 4619061 4619062 4619063 4619065 4619066 4619067 4619070 4619080 4719081 4719082 4719083 4719084 4719090 4719100 4719110 4719120 4719200 5119205 5119400 4719402 4819403 4819408 4719410 4719418 4719420 4719423 5019424 5119425 5119430 51
19440 5119450 5119451 5119452 5119453 5119600 4819620 4819640 4819660 4820200 50, 5720250 50, 5720350 50, 5720450 50, 5720550 50, 5720600 50, 5720610 50, 5722310 5722320 5728000 2928010 2928020 2928030 2928040 2928050 2928060 2928070 2928100 2928260 2928270 2928301 2728302 2728303 2728304 2728420 2728430 2728440 2728450 2728460 25
28470 2528600 2928670 2928680 2928690 2928700 2828710 2828715 2828720 2828730 2928735 2828740 2830100 5230120 5230122 5230160 5230250 5231550 5233095 5333100 5333110 5333120 5333150 5333170 5333210 5333250 22, 5333255 23, 5334015 5235600 5235789 5235805 5240060 5840160 5840210 5840310 5841010 3241060 3241110 32
42005 5542020 5442025 5442026 5442027 5642030 5642032 5642035 5642036 5642045 5642047 5642048 5542049 5642056 5542060 5542062 5542065 5542067 5542070 5442074 5442075 5442080 5442081 5442083 5442090 5442095 5042095 5742100 5442101 5442102 5542103 5442104 5442105 5742115 5442117 5442118 5542129 5742150 54
42200 5542250 5542330 5642345 5642355 5642356 5642357 5642358 5642359 5642500 5542520 5542525 5542700 5743420 3043430 3043460 3043470 3143510 3243600 4843605 4843610 4843615 4943620 4943630 4943640 4944240 3244250 3144280 3245000 3045005 3045042 3245050 3245110 3245115 3245160 3045161 3045200 3245310 19
45320 1945350 1945360 1945375 1945390 1945395 1945400 3545450 3545600 3245700 2345730 5545760 2345805 3045805 5245807 31, 5245808 5245810 3045810 5245820 3045850 3045945 3145950 3145960 3145965 3245970 3045980 3146310 4946400 4946410 4946420 4946435 4946445 3246455 3246482 4946484 4946540 4546555 4546560 45
46565 4546630 2246640 2246650 2246660 2246750 3246800 2146801 2146802 2146803 3246804 2146805 2146806 2146807 21, 4746809 21, 4546810 2146811 2146812 2146813 2146830 2046831 2046832 2046833 2046834 2046835 2046837 20, 4546838 20, 4546839 20, 4546840 20, 4546841 2046842 2046843 2046846 2146847 2146849 2146850 2247050 3247100 31
50050 5850100 5850200 5850350 5850400 5850450 5850500 5853300 6053360 6054020 5754040 5755000 6055050 6055170 6055190 6055300 6055500 6056500 5956505 5957060 6157090 6157170 6157200 6157230 6157320 6157380 6157470 6157600 6157620 (1R) 6157630 (2SR) 6157660 (12LR) 6157680 (2L) 6160030 5860090 5960102 5860110 5860115 5860118 58
60120 5960180 5960300 6060450 5860480 5960510 5960570 5960600 5960630 5960660 5960720 5960750 5960780 5960810 5960870 6061080 6061260 6061350 6061770 6062030 6162090 6162180 6262300 6262330 6262360 6262420 6262450 6262460 6262480 6262600 6262630 6262660 6262720 6262750 6262810 6262875 6262900 6262930 62
63020 6263055 6163080 6163085 6163170 6163175 6165060 6066030 6066060 6066090 6066330 6066360 6267090 6067150 6067240 6267390 6267450 6267830 6068030 5968060 5968090 5968120 5968180 5968300 5990600 58
Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s)Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s) Item# Page(s)
Hyde Tools, Inc.A Hyde Group Company
54 Eastford Road, Southbridge, MA 01550-1875www.hydetools.com
800-872-4933FAX 508-765-5250
E-mail custrelations@hydetools.com
Hyde Tools, Inc. is a strong industry supporter and a member of these organizations:American Edged Products Manufacturing Association / American Hardware Manufacturers Association / American Wall Covering Institute / Associated Industries of Massachusetts / Association for Manufacturing Excellence Central Massachusetts Employees Association / Hand Tool Institute / Home Improvement Research Institute Industrial Supply Association / In-Store Marketing Institute / National Guild of Professional Paperhangers, Inc. National Tile Contractors Association / Painting and Decorating Contractors of America / Specialty Tools and
Fasteners Distributors Association (STAFDA) / Worldwide Do-It-Yourself Council
AnglePRO®, Black & Silver®, Hammer Head®, HYDE®, MAXXGRIP®, MAXXGRIP PRO®, Mudslinger®, Pail Popper®, PivotJet®, ProShield®, RVT Rapid Valve Transfer Technology®, SwitchBlade® and QuickReach® are REGISTERED TRADEMARKS of Hyde Tools, Inc. DELTA™, Mini Guide™, Painter’s Assistant™, Pour & Roll™, PocketJack™, Pro Project™, Pro Stainless™, Spray & Roll™, Super Guide™, SuperFlexx™, Value Series™, ProWood™ and Red Star™ are TRADEMARKS of Hyde Tools, Inc. Bear Claw™, Caulk-Away™, Caulk-Away PRO™, Caulk-Rite™, Caulk-Rite PRO™, ClawGrip®, Corner Ease®, Painter’s Pyramid®, PaintMiser®, Quickly Clean™, Wet & Set® and WET n STICK® are
trademarks and non-registered trademarks in use under license by Hyde Tools, Inc.
©2014 Hyde Tools, Inc. All rights reserved.
99589