Post on 07-Mar-2021
transcript
PC210/LC/NLC-8
ENGINE POWER116 kW / 156 HP @ 2.000 rpm
OPERATING WEIGHTPC210-8: 21.390 - 22.830 kg
PC210LC-8: 21.990 - 23.750 kgPC210NLC-8: 21.830 - 23.360 kg
BUCKET CAPACITYmax. 1,68 m³
Hydraulic Excavator
PC210
2
Walk-AroundThe Komatsu Dash 8 crawler excavators set new worldwide standards for construction
equipment. Operator safety and comfort is a focal point in their design, and their outstanding
performance and specifi cations will contribute directly to the success of your business. With
standard auxiliary hydraulic systems and quick-coupler power lines, these machines are
ready to take on any job, whenever and wherever you need it done. Safely rely on Komatsu’s
80 years of experience and commitment to Quality and Durability: your Dash 8 crawler
excavator will quickly become your number one business partner.
Total versatility• Ideal for a wide range of applications
• 5 working modes
• Wide choice of options
• Built-in versatility
Powerful and environmentally friendly• Low consumption ecot3 engine
• Komatsu integrated hydraulic system
• Eco-gauge and idle caution
• Reduced wastage
3
PC210-8
Komatsu Satellite
Monitoring System
First-class operator comfort• Wide, spacious cab
• Low noise design
• Low vibration levels
• Pressurised cab
• Large, widescreen TFT monitor panel
Highest safety standards• Safe SpaceCab™
• Rear view camera
• Optimal jobsite safety
• Safe access, easy maintenance
• Falling Object Protection System (FOPS) optional
Quality you can rely on• Reliable and effi cient
• Rugged design
• Komatsu-quality components
• Extensive dealer support network
ENGINE POWER116 kW / 156 HP @ 2.000 rpm
OPERATING WEIGHTPC210-8: 21.390 - 22.830 kg
PC210LC-8: 21.990 - 23.750 kgPC210NLC-8: 21.830 - 23.360 kg
BUCKET CAPACITYmax. 1,68 m³
4
Total VersatilityIdeal for a wide range of applications
Powerful and precise, the Komatsu
PC210-8 is equipped to effi ciently
carry out any task your business
requires. On big sites or small, for
digging, trenching, landscaping or
site preparation, the Komatsu origi-
nal equipment hydraulic system
always ensures maximum produc-
tivity and control.
5 working modes
Power, Lifting, Breaker, Attachment,
and Economy.
The PC210-8 features 5 selecta-
ble working modes that optimise
performance and fuel usage. The
Economy mode can be adjusted
for an ideal balance between power
and economy to match your work.
The oil fl ow delivered to hydraulic
attachments is adjustable directly
on the class-leading wide screen
monitor panel.
Built-in versatility
To allow the use of many attach-
ments, such as buckets, breakers
or demolition tools, a power sup-
ply for a hydraulic quick coupler
with adjustable pressure settings,
and an additional hydraulic cir-
cuit controlled by a foot pedal
and a sliding joystick push button
are standard on the PC210-8. A
second optional auxiliary line is
also available for attachments that
require extra hydraulic actuation.
A wide choice of options
With a choice of different styles
of boom, arm and undercarriage,
you can confi gure the PC210-8 to
match specifi c demands for trans-
port, working envelope or duty.
The excavator can for instance be
equipped with Komatsu’s own
Super Long Front end equipment,
to let the machine work in other-
wise inaccessible areas. Extra hy-
draulic arrangements are available
for every boom and arm confi gura-
tion, making sure that the machine
always contributes strongly to your
business.
5
6
Powerful and Environmentally Friendly
Eco-gauge
Idle caution
Low consumption ecot3 engine
The Komatsu SAA6D107E-1 engine
provides high torque, a better per-
formance at low speed and low fuel
consumption. This ecot3 engine
features a new combustion cham-
ber design with optimised ignition
and combustion timing. The operat-
ing pressure of the new common
rail system was increased for im-
proved injection and fuel effi ciency.
The air-to-air charge cooler reduces
the temperature of the compressed
air supplied by the turbo charger to
the cylinders, and further improves
fuel consumption.
Meets EU Stage IIIA
The new Komatsu ecot3 engine
technology reduces NOx and
particle emissions, fuel consump-
tion and noise level. The Komatsu
SAA6D107E-1 engine is certifi ed for
EPA Tier III and EU Stage IIIA emis-
sion regulations. To further reduce
the machine’s emissions, a Diesel
Particulate Filter is also available.
Komatsu integrated hydraulic system
The PC210-8 is a highly respon-
sive and productive machine with
all major hydraulic parts designed
and manufactured by Komatsu.
The electronic Closed Load Sens-
ing hydraulic System (CLSS) offers
complete control during individual
or combined movements - without
sacrifi cing performance or produc-
tivity.
Eco-gauge and idle caution
The unique ECO-gauge helps the
operator reduce emissions and fuel
consumption for environmentally
friendly and energy saving opera-
tions. And to further avoid wast-
ing fuel when the machine is not
actually working, a standard-fi t idle
caution is displayed if the engine
idles for 5 minutes or more.
7
Reduced wastage
To avoid spillage of excess grease
– and prolong the life of your
machine – the PC210-8 can be
equipped with an automatic greas-
ing system that provides precisely
the correct amount of grease when
and where it’s required.
8
First-Class Operator Comfort
Hot and cool box
Joysticks with proportional control button for
attachments
Wide spacious cab
The newly designed, wide and
spacious cab includes a heated
air suspension seat with a reclin-
ing backrest. The seat height and
longitudinal inclination are easily
adjusted with a pull-up lever. You
can also set the operational posture
of the armrest and the position of
the console or recline the seat all
the way and place it into a fully fl at
state with the headrest attached.
Low noise design
Komatsu Dash 8 crawler excava-
tors feature the lowest in-class
external noise levels and are
especially well-suited for work in
confi ned spaces or urban areas.
Reduced fan speed, a large capac-
ity radiator, and the optimal usage
of sound insulation and of sound
absorbing materials help to make
noise levels inside Dash 8 excava-
tors comparable to those inside an
executive car.
Pressurised cab
An automatic air conditioner, an air
fi lter and a positive internal air pres-
sure (60 Pa) combine to prevent
external dust from entering the cab.
Cab damper mounting
The built-in stability of the Komatsu
PC210-8, combined with a highly
rigid deck and a sprung multi-layer
viscous mount system, drastically
reduces vibration levels for the
operator.
Automatic air conditioner
9
Large, widescreen TFT monitor
To enable safe, accurate and
smooth work, the user friendly
monitor is the highly intuitive user
interface for the machine’s Equip-
ment Management and Monitoring
System (EMMS). Multilingual and
with all essential information avail-
able at a glance, it features simple
and easy to operate switches and
multifunction keys that provide the
operator with fi ngertip access to a
wide range of functions and operat-
ing information.
10
Highest Safety StandardsSafe SpaceCab™
Specifi cally designed for Komatsu
excavators, the Dash 8 cab has a
tubular steel frame. It provides very
high shock absorbency, impact
resistance and durability. The seat
belt is designed to keep the opera-
tor in the safety zone of the cab
in the event of a roll-over. At your
request, the Komatsu PC210-8 can
also be fi tted with an ISO 10262
Level 2 Falling Object Protective
System (FOPS).
Rear view camera
A standard fi tment camera gives
an exceptionally clear view of the
rear work zone on the wide-screen
monitor panel. Large mirrors on
both sides ensure that machine vis-
ibility meets the latest ISO stand-
ards.
Optimal job site safety
Safety features on the Komatsu
PC210-8 comply with the lat-
est industry standards and work
together as a system to minimise
risks to personnel in and around the
machine. An audible travel alarm
further promotes job site safety.
Very durable anti-slip plates – with
additional high friction covering
– maintain long term traction per-
formance.
Safe and easy maintenance
Thermal guards are placed around
high temperature parts of the
engine. The fan belt and pulleys
are well protected and in case of
damage, fi re risk is reduced by a
pump/engine partition that prevents
hydraulic oil from spraying onto the
engine.
Rear view camera
Safe SpaceCab™ Anti-slip plates
11
12
Quality You Can Rely On
Extensive dealer support network
The extensive Komatsu distribution
and dealer network is standing by
to help keep your fl eet in optimum
condition. Customised servic-
ing packages are available, with
express availability of spare parts,
to make sure that your Komatsu will
continue to perform at its peak.
Komatsu-quality components
With the latest computer design
techniques and a thorough test
programme, Komatsu’s global
know-how produces machines that
are designed, manufactured and
tested to meet your highest stand-
ards.
Rugged design
Maximum toughness and durabil-
ity – along with top class customer
service – are the cornerstones of
Komatsu’s philosophy. Single piece
plates and castings are used in
key areas of the machine’s struc-
ture for good load distribution.
Highly durable rubbing strips on the
underside of the arm protect the
structure from material falling from
the bucket.
Reliable and effi cient
Productivity is the key to success
– all major components of the
PC210-8 are designed and directly
manufactured by Komatsu. Essen-
tial machine functions are perfectly
matched for a highly reliable and
productive machine.
Cast boom foot Single piece boom plates
13
Komatsu Satellite Monitoring System
KOMTRAX™ is a revolutionary
machine tracking system designed
to save you time and money. You
can now monitor your equipment
anytime and anywhere. Use valu-
able machine data received via the
KOMTRAX™ web site to optimise
your maintenance planning and
machine performances.
KOMTRAX™ can assist you with:
Full machine monitoring
Get detailed operation data to know
when your machines are used and
how productive they are.
Total Fleet Management
Keep track of the location of your
machines at all times and discour-
age unapproved usage or theft.
Complete machine status
Receive warnings, alerts and cau-
tions, via a web site or by e-mail,
to help with maintenance planning
and for longer machine life.
For further details on KOMTRAX™,
please ask your Komatsu dealer for
the latest KOMTRAX™ brochure.
15
KOMTRAX™
Alarm notifi cations - You can receive notifi -
cation of alarms both via the KOMTRAX™
website and by e-mail.
Added security - The “engine lock” feature
allows to program when a machine’s engine
can be started. And with “geo-fence”,
KOMTRAX™ sends notifi cation every time
your machine moves in or out of a predeter-
Fleet location - The machine list instantly
locates all your machines, even those in
other countries.
Maintenance planning - To increase produc-
tivity and improve maintenance planning,
alerts indicate when items such as fi lters or
oil must be replaced.
Machine tracking during transport - When
your machine is transported, KOMTRAX™
sends travel messages to the web site or
by e-mail to inform you of its progress, and
confi rms when it reaches its destination.
Machine working time - With the “daily work-
ing record” chart, get precise engine running
time data: when your machine was started
and when it was shut down, as well as total
engine running time.
16
Easy Maintenance
Water separator
This is stand-
ard equipment
which removes
any water that
has become
mixed with the
fuel, preventing fuel system dam-
age.
Easy access to the engine oil fi lter and fuel drain valve
The engine oil fi lter and fuel drain
valve are mounted remotely to im-
prove accessibility.
Side-by-side cooling
Since the radiator, aftercooler and
oil cooler are arranged in parallel, it
is easy to clean, remove and install
them.
Washable fl oor
The fl oor is easy to keep clean.
The gently inclined surface has
a fl anged fl oormat and drainage
holes to facilitate runoff.
Long-life oil fi lters
The hydraulic oil fi lter uses high-
performance fi ltering material for
long element
replacement
intervals, which
signifi cantly
reduces mainte-
nance costs.
Inclined track frame
The track frame is sloped so that
dirt will not accumulate and can be
removed easily.
Gas-assisted engine hood damper cylinders
The engine hood can be easily
opened and closed with help of the
gas-assisted engine hood damper
cylinders.
Flexible warranty
When you purchase Komatsu
equipment, you gain access to a
broad range of programmes and
services that have been designed
to help you get the most from
your investment. For example,
Komatsu’s Flexible Warranty
Programme provides a range of
extended warranty options on
the machine and its components.
These can be chosen to meet your
individual needs and activities. This
programme is designed to help
reduce total operating costs.
17
ENGINE
HYDRAULIC SYSTEM
ENVIRONMENT
SWING SYSTEM
DRIVES AND BRAKES
UNDERCARRIAGE
SERVICE REFILL CAPACITIES
Fuel tank................................................................................325,0 ltr
Radiator...................................................................................20,4 ltr
Engine oil .................................................................................23,1 ltr
Swing drive................................................................................6,6 ltr
Hydraulic tank .......................................................................137,0 ltr
Final drive (each side)................................................................3,3 ltr
Construction.................................................. X-frame centre section
with box section track frames
Track assembly
Type .............................................................................Fully sealed
Shoes (each side) ........................ 45 (PC210), 49 (PC210LC/NLC)
Tension...................................Combined spring and hydraulic unit
Rollers
Track rollers (each side) ................... 7 (PC210), 9 (PC210LC/NLC)
Carrier rollers (each side) ..............................................................2
Steering control ....................................... 2 levers with pedals giving
full independent control of each track
Drive method................................................................... Hydrostatic
Travel operation....................................Automatic 3-speed selection
Gradeability .........................................................................70%, 35°
Max. travel speeds
Lo / Mi / Hi ....................................................... 3,0 / 4,1 / 5,5 km/h
Maximum drawbar pull.......................................................18.200 kg
Brake system........................................ Hydraulically operated discs
in each travel motor
Type ............................................. Axial piston motor driving through
planetary double reduction gearbox
Swing lock..................................Electrically actuated wet multi-disc
brake integrated into swing motor
Swing speed................................................................... 0 - 12,4 rpm
Swing torque ......................................................................... 68 kNm
Max. pressure.........................................................................295 bar
Engine emissions ..........................Fully complies with EU Stage IIIA
and EPA Tier III exhaust emission regulations
Noise levels
LwA external ................................102 dB(A) (2000/14/EC Stage II)
LpA operator ear........................69 dB(A) (ISO 6396 dynamic test)
Type ..............HydrauMind. Closed-centre system with load sensing
and pressure compensation valves
Additional circuits....................Depending on the specifi cation up to
2 additional circuits can be installed
Main pump ............................2 variable displacement piston pumps
supplying boom, arm, bucket, swing and travel circuits
Maximum pump fl ow................................................. 2 × 219 ltr/min
Relief valve settings
Implement ...........................................................................380 bar
Travel...................................................................................380 bar
Swing ..................................................................................295 bar
Pilot circuit ............................................................................33 bar
Model .......................................................... Komatsu SAA6D107E-1
Type ...............................Common rail direct injection, water-cooled,
emissionised, turbocharged, after-cooled diesel
Engine power
at rated engine speed.................................................... 2.000 rpm
ISO 14396............................................................116 kW / 156 HP
ISO 9249 (net engine power) ...............................110 kW / 148 HP
No. of cylinders ................................................................................6
Bore × stroke...............................................................107 × 124 mm
Displacement...........................................................................6,69 ltr
Battery ...................................................................... 2 × 12 V/140 Ah
Alternator............................................................................ 24 V/60 A
Starter motor .................................................................. 24 V/5,5 kW
Air fi lter type ..............................................Double element type with
monitor panel dust indicator and auto dust evacuator
Cooling .................. Suction type cooling fan with radiator fl y screen
Specifi cations
OPERATING WEIGHT (APPR.)
MONO BOOM TWO-PIECE BOOM
PC210-8 PC210LC-8 PC210NLC-8 PC210-8 PC210LC-8 PC210NLC-8
Triple grouser shoes
Operating weight
Ground pressure
Operating weight
Ground pressure
Operating weight
Ground pressure
Operating weight
Ground pressure
Operating weight
Ground pressure
Operating weight
Ground pressure
500 mm – – – – 21.830 kg 0,55 kg/cm² 22.730 kg 0,57 kg/cm²
600 mm 21.390 kg 0,50 kg/cm² 21.990 kg 0,46 kg/cm² 22.190 kg 0,47 kg/cm² 22.290 kg 0,52 kg/cm² 22.890 kg 0,48 kg/cm² 23.090 kg 0,48 kg/cm²
700 mm 21.640 kg 0,43 kg/cm² 22.260 kg 0,40 kg/cm² 22.460 kg 0,40 kg/cm² 22.540 kg 0,45 kg/cm² 23.160 kg 0,42 kg/cm² 23.360 kg 0,42 kg/cm²
800 mm 21.930 kg 0,38 kg/cm² 22.580 kg 0,36 kg/cm² – – 22.830 kg 0,40 kg/cm² 23.480 kg 0,37 kg/cm²
900 mm – – 22.850 kg 0,32 kg/cm² – – 23.750 kg 0,33 kg/cm²
Operating weight, including 2,9 m arm, 900 kg bucket, operator, lubricant, coolant, full fuel tank
and the standard equipment.
18
Dimensions & Performance Figures
MACHINE DIMENSIONS PC210-8 PC210LC-8 PC210NLC-8
A Overall width of upper structure 2.500 mm 2.500 mm 2.500 mm
B Overall height of cab 3.035 mm 3.035 mm 3.035 mm
C Overall length of basic machine 4.810 mm 4.995 mm 4.995 mm
D Tail length 2.770 mm 2.770 mm 2.770 mm
Tail swing radius 2.800 mm 2.800 mm 2.800 mm
E Clearance under counterweight 1.100 mm 1.100 mm 1.100 mm
F Machine tail height 2.110 mm 2.110 mm 2.110 mm
G Ground clearance 440 mm 440 mm 440 mm
H Tumbler centre distance 3.275 mm 3.655 mm 3.655 mm
I Track length 4.080 mm 4.450 mm 4.450 mm
J Track gauge 2.200 mm 2.380 mm 2.040 mm
K Track shoe width 500, 600, 700, 800 mm 600, 700, 800, 900 mm 500, 600, 700 mm
L Overall track width with 500 mm shoe 2.700 mm – 2.540 mm
Overall track width with 600 mm shoe 2.800 mm 2.980 mm 2.640 mm
Overall track width with 700 mm shoe 2.900 mm 3.080 mm 2.740 mm
Overall track width with 800 mm shoe 3.000 mm 3.180 mm –
Overall track width with 900 mm shoe – 3.280 mm –
TRANSPORT DIMENSIONS MONO BOOM TWO-PIECE BOOM
Arm length 1,8 m 2,4 m 2,9 m 1,8 m 2,4 m 2,9 m
M Transport length 9.540 mm 9.555 mm 9.485 mm 9.515 mm 9.420 mm 9.395 mm
N Length on ground (transport) PC210 6.270 mm 5.700 mm 4.815 mm 6.390 mm 5.970 mm 5.185 mm
Length on ground (transport) PC210LC/NLC 6.455 mm 5.885 mm 5.000 mm 6.580 mm 6.160 mm 5.375 mm
O Overall height (to top of boom) 2.985 mm 3.190 mm 2.970 mm 2.865 mm 3.090 mm 3.030 mm
MONO BOOM
TWO-PIECE BOOM
19
BUCKET AND ARM FORCE
Arm length 1,8 m 2,4 m 2,9 m
Bucket digging force 16.500 kg 16.500 kg 14.100 kg
Bucket digging force at PowerMax 17.500 kg 17.500 kg 15.200 kg
Arm crowd force 13.800 kg 12.200 kg 10.300 kg
Arm crowd force at PowerMax 14.800 kg 13.000 kg 11.000 kg
Max. capacity and weight have been calculated according to ISO 10567:2007.
Please consult with your distributor for the correct selection of buckets and attachments to suit the application.
PC210LC-8 / MAX. BUCKET CAPACITY AND WEIGHT
MONO BOOM
Arm length 1,8 m 2,4 m 2,9 m
Material weight up to 1,2 t/m³ 1,68 m³ 1.200 kg 1,62 m³ 1.150 kg 1,47 m³ 1.075 kg
Material weight up to 1,5 t/m³ 1,50 m³ 1.075 kg 1,38 m³ 1.025 kg 1,25 m³ 950 kg
Material weight up to 1,8 t/m³ 1,30 m³ 975 kg 1,20 m³ 925 kg 1,09 m³ 875 kg
TWO-PIECE BOOM
Arm length 1,8 m 2,4 m 2,9 m
Material weight up to 1,2 t/m³ 1,68 m³ 1.200 kg 1,50 m³ 1.075 kg 1,38 m³ 1.025 kg
Material weight up to 1,5 t/m³ 1,45 m³ 1.050 kg 1,28 m³ 975 kg 1,18 m³ 925 kg
Material weight up to 1,8 t/m³ 1,26 m³ 950 kg 1,11 m³ 875 kg 1,02 m³ 850 kg
PC210NLC-8 / MAX. BUCKET CAPACITY AND WEIGHT
MONO BOOM
Arm length 1,8 m 2,4 m 2,9 m
Material weight up to 1,2 t/m³ 1,53 m³ 1.100 kg 1,38 m³ 1.025 kg 1,24 m³ 950 kg
Material weight up to 1,5 t/m³ 1,30 m³ 975 kg 1,18 m³ 925 kg 1,05 m³ 850 kg
Material weight up to 1,8 t/m³ 1,13 m³ 900 kg 1,00 m³ 850 kg 0,91 m³ 775 kg
TWO-PIECE BOOM
Arm length 1,8 m 2,4 m 2,9 m
Material weight up to 1,2 t/m³ 1,44 m³ 1.050 kg 1,27 m³ 950 kg 1,15 m³ 900 kg
Material weight up to 1,5 t/m³ 1,23 m³ 950 kg 1,08 m³ 875 kg 0,98 m³ 825 kg
Material weight up to 1,8 t/m³ 1,07 m³ 850 kg 0,94 m³ 800 kg 0,85 m³ 750 kg
PC210-8 / MAX. BUCKET CAPACITY AND WEIGHT
MONO BOOM
Arm length 1,8 m 2,4 m 2,9 m
Material weight up to 1,2 t/m³ 1,56 m³ 1.100 kg 1,38 m³ 1.025 kg 1,27 m³ 950 kg
Material weight up to 1,5 t/m³ 1,33 m³ 1.000 kg 1,18 m³ 925 kg 1,08 m³ 875 kg
Material weight up to 1,8 t/m³ 1,15 m³ 900 kg 1,00 m³ 850 kg 0,94 m³ 800 kg
TWO-PIECE BOOM
Arm length 1,8 m 2,4 m 2,9 m
Material weight up to 1,2 t/m³ 1,47 m³ 1.075 kg 1,30 m³ 975 kg 1,18 m³ 925 kg
Material weight up to 1,5 t/m³ 1,25 m³ 950 kg 1,10 m³ 875 kg 1,00 m³ 825 kg
Material weight up to 1,8 t/m³ 1,09 m³ 875 kg 0,96 m³ 800 kg 0,87 m³ 750 kg
20
Working RangeMONO BOOM
ARM LENGTH 1,8 m 2,4 m 2,9 m
A Max. digging height 9.500 mm 9.800 mm 10.000 mm
B Max. dumping height 6.630 mm 6.890 mm 7.110 mm
C Max. digging depth 5.380 mm 6.095 mm 6.620 mm
D Max. vertical wall digging depth 4.630 mm 5.430 mm 5.980 mm
E Max. digging depth of cut for 2,44 m level 5.130 mm 5.780 mm 6.370 mm
F Max. digging reach 8.850 mm 9.380 mm 9.875 mm
G Max. digging reach at ground level 8.660 mm 9.190 mm 9.700 mm
H Min. swing radius 3.010 mm 3.090 mm 3.040 mm
21
1
0
2
3
4
5
6
7
8
9
10
2.440 mm
-7
-6
-5
-4
-3
-2
-1
11
12(m)
A
B
H
C ED
GF
11 10 9 8 7 6 5 4 3 2 1 0(m)
G.L.
ARM LENGTH 1,8 m 2,4 m 2,9 m
A Max. digging height 10.260 mm 10.660 mm 11.060 mm
B Max. dumping height 7.295 mm 7.695 mm 8.090 mm
C Max. digging depth 5.120 mm 5.700 mm 6.210 mm
D Max. vertical wall digging depth 4.040 mm 4.745 mm 5.250 mm
E Max. digging depth of cut for 2,44 m level 5.000 mm 5.590 mm 6.105 mm
F Max. digging reach 8.900 mm 9.440 mm 9.935 mm
G Max. digging reach at ground level 8.695 mm 9.250 mm 9.750 mm
H Min. swing radius 3.105 mm 2.890 mm 2.640 mm
TWO-PIECE BOOM
22
7,5 m kg *2.800 *2.800 *4.150 *4.150
6,0 m kg *2.650 2.600 *3.450 2.800 *4.250 *4.250
4,5 m kg *2.650 2.150 4.150 2.750 *4.850 4.150 *5.400 *5.400
3,0 m kg *2.750 1.950 4.000 2.600 *5.800 3.900 *7.350 6.200 *11.450 *11.450
1,5 m kg 2.950 1.850 3.850 2.500 5.550 3.600 8.900 5.600 *6.350 *6.350
0,0 m kg 3.000 1.850 3.700 2.350 5.300 3.400 8.450 5.200 *7.200 *7.200
-1,5 m kg 3.250 2.050 3.650 2.300 5.200 3.250 8.250 5.050 *10.450 9.800 *6.300 *6.300
-3,0 m kg 3.900 2.450 5.200 3.250 8.300 5.100 *15.250 10.000 *10.050 *10.050
-4,5 m kg 5.400 3.450 8.550 5.300 *12.950 10.450
7,5 m kg *4.150 *4.150
6,0 m kg *3.950 3.000 *4.750 4.200
4,5 m kg 3.750 2.450 4.050 2.650 *5.350 4.050 *6.200 *6.200
3,0 m kg 3.400 2.200 3.950 2.550 5.800 3.800 *8.050 6.000
1,5 m kg 3.250 2.050 3.800 2.450 5.500 3.550 8.700 5.450
0,0 m kg 3.350 2.100 3.700 2.350 5.300 3.350 8.350 5.150 *6.750 *6.750
-1,5 m kg 3.700 2.350 3.700 2.350 5.200 3.300 8.300 5.100 *11.600 9.900 *7.300 *7.300
-3,0 m kg 4.550 2.900 5.250 3.350 8.400 5.150 *14.500 10.200 *12.150 *12.150
-4,5 m kg *6.800 4.450 *8.100 5.450 *11.500 10.700
7,5 m kg *4.950 *4.950
6,0 m kg *4.550 3.450 *5.450 4.150 *5.750 *5.750
4,5 m kg 4.200 2.750 *5.900 4.000 *7.100 6.450 *10.050 *10.050
3,0 m kg 3.750 2.450 3.950 2.550 5.700 3.750 *8.900 5.800
1,5 m kg 3.600 2.350 3.850 2.450 5.450 3.500 8.550 5.300
0,0 m kg 3.750 2.400 3.800 2.400 5.300 3.350 8.350 5.150
-1,5 m kg 4.200 2.700 5.300 3.350 8.350 5.150 *12.100 10.100
-3,0 m kg 5.400 3.500 5.450 3.500 8.550 5.300 *13.150 10.400
-4,5 m kg
7,5 m kg
6,0 m kg *2.450 2.450 *3.700 2.700 *5.150 4.300
4,5 m kg *2.400 2.000 4.000 2.650 *5.450 4.100 *6.750 *6.750
3,0 m kg *2.450 1.800 3.900 2.500 5.750 3.800 *9.050 6.150
1,5 m kg *2.650 1.700 3.800 2.350 5.500 3.450 8.800 5.400
0,0 m kg *2.850 1.700 3.650 2.250 5.200 3.200 8.300 4.950 *5.900 *5.900
-1,5 m kg 3.150 1.900 3.600 2.200 5.050 3.100 8.100 4.800 *8.750 *8.750
-3,0 m kg 3.750 2.300 5.100 3.100 *8.000 4.850 *8.750 *8.750
-4,5 m kg
7,5 m kg
6,0 m kg *3.950 2.800 *5.450 4.200 *6.900 6.900
4,5 m kg 3.550 2.250 4.000 2.600 *5.800 4.000 *7.900 6.600 *9.550 *9.550
3,0 m kg 3.200 2.000 3.900 2.450 5.650 3.700 9.200 5.900
1,5 m kg 3.100 1.900 3.750 2.350 5.400 3.400 8.600 5.250
0,0 m kg 3.200 1.950 3.650 2.250 5.150 3.200 8.200 4.900
-1,5 m kg 3.500 2.150 3.600 2.200 5.100 3.100 8.100 4.850 *9.350 *9.350
-3,0 m kg *3.850 2.700 *5.150 3.200 *7.100 4.950
-4,5 m kg
7,5 m kg
6,0 m kg *4.300 3.300 *5.900 4.050 *7.600 6.900
4,5 m kg 4.050 2.600 5.850 3.900 *8.800 6.400 *10.500 *10.500
3,0 m kg 3.650 2.300 3.850 2.450 5.600 3.650 9.100 5.700
1,5 m kg 3.500 2.200 3.750 2.350 5.400 3.400 8.450 5.100
0,0 m kg 3.650 2.250 3.700 2.300 5.200 3.200 8.200 4.900
-1,5 m kg 4.100 2.550 5.200 3.200 8.200 4.950
-3,0 m kg
-4,5 m kg
Lifting Capacity
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
A
B
C
When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights.
With 600 mm shoes
– Reach from swing center
– Bucket hook height
– Lifting capacities, including bucket (760 kg), bucket linkage (200 kg) and bucket cylinder (140 kg)
– Rating over front
– Rating over side
– Rating at maximum reach
2,9 m
760 kg
A
B
C
When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights.
With 600 mm shoes
– Reach from swing center
– Bucket hook height
– Lifting capacities, including bucket (760 kg), bucket linkage (200 kg) and bucket cylinder (140 kg)
– Rating over front
– Rating over side
– Rating at maximum reach
Arm length
7,5 m 6,0 m 4,5 m 3,0 m 1,5 m
Arm length
7,5 m 6,0 m 4,5 m 3,0 m 1,5 m
2,4 m
760 kg
1,8 m
760 kg
2,9 m
760 kg
2,4 m
760 kg
1,8 m
760 kg
MONO BOOMPC210-8
TWO-PIECE BOOMPC210-8
23
7,5 m kg *2.800 *2.800 *4.150 *4.150
6,0 m kg *2.650 *2.650 *3.450 3.200 *4.250 *4.250
4,5 m kg *2.650 2.500 *4.550 3.150 *4.850 4.750 *5.400 *5.400
3,0 m kg *2.750 2.250 4.900 3.050 *5.800 4.450 *7.350 7.100 *11.450 *11.450
1,5 m kg *3.000 2.200 4.750 2.900 *6.750 4.150 *9.250 6.450 *6.350 *6.350
0,0 m kg *3.400 2.200 4.600 2.750 6.600 3.950 *10.450 6.050 *7.200 *7.200
-1,5 m kg 4.050 2.400 4.550 2.700 6.450 3.800 10.450 5.900 *10.450 *10.450 *6.300 *6.300
-3,0 m kg 4.800 2.900 6.450 3.850 *10.450 5.950 *15.250 11.900 *10.050 *10.050
-4,5 m kg *6.300 4.000 *9.000 6.150 *12.950 12.350
7,5 m kg *4.150 *4.150
6,0 m kg *3.950 3.450 *4.750 *4.750
4,5 m kg *3.950 2.850 4.950 3.100 *5.350 4.650 *6.200 *6.200
3,0 m kg 4.150 2.550 4.850 3.000 *6.200 4.350 *8.050 6.900
1,5 m kg 4.050 2.450 4.700 2.850 6.750 4.100 *9.800 6.350
0,0 m kg 4.150 2.500 4.600 2.750 6.550 3.900 10.550 6.000 *6.750 *6.750
-1,5 m kg 4.600 2.750 4.600 2.750 6.450 3.850 10.500 5.950 *11.600 *11.600 *7.300 *7.300
-3,0 m kg 5.650 3.400 6.550 3.900 *10.150 6.050 *14.500 12.100 *12.150 *12.150
-4,5 m kg *6.800 5.150 *8.100 6.300 *11.500 *11.500
7,5 m kg *4.950 *4.950
6,0 m kg *4.550 3.950 *5.450 4.700 *5.750 *5.750
4,5 m kg *4.550 3.200 *5.900 4.550 *7.100 *7.100 *10.050 *10.050
3,0 m kg 4.600 2.850 4.800 3.000 *6.700 4.300 *8.900 6.700
1,5 m kg 4.450 2.700 4.700 2.900 6.750 4.100 *10.400 6.200
0,0 m kg 4.600 2.800 4.650 2.850 6.550 3.900 10.550 6.000
-1,5 m kg 5.200 3.150 6.550 3.900 10.550 6.000 *12.100 11.950
-3,0 m kg 6.650 4.050 6.700 4.050 *9.600 6.200 *13.150 12.300
-4,5 m kg
7,5 m kg
6,0 m kg *2.450 *2.450 *3.700 3.150 *5.150 4.900
4,5 m kg *2.400 2.350 *4.300 3.100 *5.450 4.700 *6.750 *6.750
3,0 m kg *2.450 2.100 *4.550 2.950 *6.100 4.400 *9.050 7.050
1,5 m kg *2.650 2.050 4.700 2.800 6.800 4.050 *10.400 6.300
0,0 m kg *2.950 2.050 4.550 2.650 6.500 3.800 *9.900 5.850 *5.900 *5.900
-1,5 m kg *3.500 2.250 4.500 2.600 6.350 3.650 *9.800 5.700 *8.750 *8.750
-3,0 m kg *3.780 2.750 *5.900 3.700 *8.000 5.750 *8.750 *8.750
-4,5 m kg
7,5 m kg
6,0 m kg *3.950 3.250 *5.450 4.750 *6.900 *6.900
4,5 m kg *3.900 2.650 4.900 3.000 *5.800 4.600 *7.900 7.500 *9.550 *9.550
3,0 m kg 4.000 2.350 4.800 2.900 *6.450 4.300 *9.650 6.800
1,5 m kg 3.850 2.250 4.650 2.750 6.700 3.950 *10.600 6.150
0,0 m kg 3.950 2.300 4.550 2.650 6.450 3.750 *10.400 5.800
-1,5 m kg 4.400 2.550 4.500 2.650 6.350 3.700 *9.250 5.700 *9.350 *9.350
-3,0 m kg *3.850 3.200 *5.150 3.750 *7.100 5.850
-4,5 m kg
7,5 m kg
6,0 m kg *4.300 3.800 *5.900 4.650 *7.600 7.850
4,5 m kg *4.200 3.050 *6.250 4.500 *8.800 7.350 *10.500 *10.500
3,0 m kg *4.300 2.700 4.750 2.850 6.900 4.200 *10.350 6.600
1,5 m kg 4.350 2.600 4.650 2.750 6.650 3.950 10.700 6.000
0,0 m kg 4.500 2.650 4.600 2.700 6.500 3.800 *10.050 5.800
-1,5 m kg *4.750 3.000 *6.450 3.800 *8.500 5.800
-3,0 m kg
-4,5 m kg
Arm length
7,5 m 6,0 m 4,5 m 3,0 m 1,5 m
Arm length
7,5 m 6,0 m 4,5 m 3,0 m 1,5 m
MONO BOOMPC210LC-8
TWO-PIECE BOOMPC210LC-8
A
B
C
When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights.
With 600 mm shoes
– Reach from swing center
– Bucket hook height
– Lifting capacities, including bucket (760 kg), bucket linkage (200 kg) and bucket cylinder (140 kg)
– Rating over front
– Rating over side
– Rating at maximum reach
A
B
C
When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights.
With 600 mm shoes
– Reach from swing center
– Bucket hook height
– Lifting capacities, including bucket (760 kg), bucket linkage (200 kg) and bucket cylinder (140 kg)
– Rating over front
– Rating over side
– Rating at maximum reach
2,9 m
760 kg
2,4 m
760 kg
1,8 m
760 kg
2,9 m
760 kg
2,4 m
760 kg
1,8 m
760 kg
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
24
7,5 m kg
6,0 m kg *2.450 2.400 *3.700 2.650 *5.150 4.250
4,5 m kg *2.400 2.000 *4.300 2.600 *5.450 4.050 *6.750 6.700
3,0 m kg *2.450 1.750 *4.550 2.500 *6.100 3.750 *9.050 5.950
1,5 m kg *2.650 1.650 4.750 2.300 6.850 3.400 *10.400 5.250
0,0 m kg *2.950 1.700 4.600 2.200 6.550 3.150 *9.900 4.850 *5.900 *5.900
-1,5 m kg *3.500 1.850 4.550 2.150 6.450 3.050 *9.800 4.700 *8.750 *8.750
-3,0 m kg *3.800 2.250 *5.900 3.050 *8.000 4.750 *8.750 *8.750
-4,5 m kg
7,5 m kg
6,0 m kg *3.950 2.750 *5.450 4.100 *6.900 6.700
4,5 m kg *3.900 2.200 4.950 2.550 *5.800 3.900 *7.900 6.450 *9.550 *9.550
3,0 m kg *4.000 1.950 4.850 2.450 *6.450 3.650 *9.650 7.550
1,5 m kg 3.900 1.850 4.700 2.300 6.750 3.350 *10.600 5.100
0,0 m kg 4.000 1.900 4.600 2.200 6.550 3.100 *10.400 4.750
-1,5 m kg 4.450 2.100 4.550 2.200 6.450 3.050 *9.250 4.750 *9.350 9.050
-3,0 m kg *3.850 2.650 *5.150 3.150 *7.100 4.800
-4,5 m kg
7,5 m kg
6,0 m kg *4.300 3.250 *5.900 4.000 *7.600 6.750
4,5 m kg *4.200 2.550 *6.250 3.850 *8.800 6.250 *10.500 *10.500
3,0 m kg *4.300 2.250 4.800 2.400 *6.900 3.600 *10.350 5.550
1,5 m kg 4.400 2.150 4.700 2.300 6.750 3.300 *10.750 5.000
0,0 m kg 4.550 2.200 4.650 2.250 6.550 3.150 *10.050 4.750
-1,5 m kg *4.750 2.500 *6.450 3.150 *8.500 4.800
-3,0 m kg
-4,5 m kg
7,5 m kg *2.800 *2.800 *4.150 *4.150
6,0 m kg *2.650 2.550 *3.450 2.750 *4.250 *4.250
4,5 m kg *2.650 2.150 *4.550 2.700 *4.850 4.100 *5.400 *5.400
3,0 m kg *2.750 1.900 4.950 2.600 *5.800 3.800 *7.350 6.050 *11.450 *11.450
1,5 m kg *3.000 1.800 4.800 2.450 *6.750 3.550 *9.250 5.350 *6.350 *6.350
0,0 m kg *3.400 1.850 4.650 2.350 6.650 3.300 *10.450 5.100 *7.200 *7.200
-1,5 m kg 4.100 2.000 4.600 2.300 6.500 3.150 10.600 4.800 *10.450 8.800 *6.300 *6.300
-3,0 m kg 4.850 2.400 6.550 3.200 *10.450 4.950 *15.250 9.600 *10.050 *10.050
-4,5 m kg *6.300 3.400 *9.000 5.150 *12.950 10.000
7,5 m kg *4.150 4.150
6,0 m kg *3.950 2.950 *4.750 4.150
4,5 m kg *3.950 2.450 *4.950 2.650 *5.350 4.000 *6.200 *6.200
3,0 m kg *4.200 2.150 4.900 2.550 *6.200 3.750 *8.050 5.850
1,5 m kg 4.100 2.050 4.750 2.400 6.850 3.500 *9.800 5.200
0,0 m kg 4.200 2.100 4.650 2.350 6.650 3.300 10.700 5.050 *6.750 *6.750
-1,5 m kg 4.650 2.300 4.650 2.300 6.550 3.200 10.600 4.800 *11.600 8.900 *7.300 *7.300
-3,0 m kg 5.700 2.850 6.600 3.300 *10.150 5.050 *14.500 9.750 *12.150 *12.150
-4,5 m kg *6.800 4.350 *8.100 5.300 *11.500 10.250
7,5 m kg *4.950 *4.950
6,0 m kg *4.550 3.400 *5.450 4.050 *5.750 *5.750
4,5 m kg *4.550 2.750 *5.900 3.950 *7.100 6.300 *10.050 *10.050
3,0 m kg 4.650 2.400 4.850 2.550 *6.700 3.700 *8.900 5.700
1,5 m kg 4.500 2.300 4.750 2.450 6.800 3.450 *10.400 5.100
0,0 m kg 4.700 2.350 4.700 2.400 6.600 3.300 10.650 5.000
-1,5 m kg 5.250 2.650 6.600 3.250 10.650 4.850 *12.100 9.050
-3,0 m kg 6.750 3.400 6.800 3.450 *9.600 5.200 *13.150 10.000
-4,5 m kg
Lifting Capacity
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
A
B
C
When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights.
With 500 mm shoes
– Reach from swing center
– Bucket hook height
– Lifting capacities, including bucket (760 kg), bucket linkage (200 kg) and bucket cylinder (140 kg)
– Rating over front
– Rating over side
– Rating at maximum reach
2,9 m
760 kg
A
B
C
When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights.
With 500 mm shoes
– Reach from swing center
– Bucket hook height
– Lifting capacities, including bucket (760 kg), bucket linkage (200 kg) and bucket cylinder (140 kg)
– Rating over front
– Rating over side
– Rating at maximum reach
Arm length
7,5 m 6,0 m 4,5 m 3,0 m 1,5 m
Arm length
7,5 m 6,0 m 4,5 m 3,0 m 1,5 m
2,4 m
760 kg
1,8 m
760 kg
2,9 m
760 kg
2,4 m
760 kg
1,8 m
760 kg
MONO BOOMPC210NLC-8
TWO-PIECE BOOMPC210NLC-8
25
Super Long Front Specifi cation
Operating weight, including Super Long Front work equipment, bucket, operator, lubricant, coolant, full fuel tank and the standard equipment.
OPERATING WEIGHT (APPR.)
PC210LC-8 PC210NLC-8
Triple grouser shoes Operating weight Ground pressure Operating weight Ground pressure
500 mm – – 24.010 kg 0,60 kg/cm²
600 mm 24.170 kg 0,51 kg/cm² 24.370 kg 0,52 kg/cm²
700 mm 24.530 kg 0,44 kg/cm² 24.730 kg 0,44 kg/cm²
800 mm 24.890 kg 0,39 kg/cm² – –
900 mm 25.250 kg 0,36 kg/cm² – –
M
O
N
TRANSPORT DIMENSIONS
M Transport length 12.435 mm
N Length on ground (transport) 4.725 mm
O Overall height (to top of boom) 3.390 mm
WORK EQUIPMENT
Boom
Length (a) ........................................................................8.795 mm
Height (b) ........................................................................1.555 mm
Weight...............................................................................2.200 kg
Arm
Length (c) ........................................................................7.375 mm
Height (d) ........................................................................1.000 mm
Weight...............................................................................1.350 kg
a
c
b
d
* Maximum load at end of arm (bucket + payload).
Max. capacity and weight have been calculated according to ISO 10567:2007.
Please consult with your distributor for the correct selection of buckets and attachments to suit the application.
MAX. BUCKET CAPACITY AND WEIGHT
PC210LC-8 PC210NLC-8
General purpose bucket
Max. bucket width 955 mm
Material weight up to 1,2 t/m³ 0,66 m³ 525 kg 0,48 m³ 425 kg
Material weight up to 1,5 t/m³ 0,56 m³ 475 kg 0,41 m³ 400 kg
Material weight up to 1,8 t/m³ 0,49 m³ 425 kg 0,36 m³ 375 kg
Ditch cleaning bucket
Max. bucket width 2.100 mm
Material weight up to 1,2 t/m³ * 1.300 kg * 1.000 kg
Material weight up to 1,5 t/m³ * 1.300 kg * 1.000 kg
Material weight up to 1,8 t/m³ – –
26
Super Long Front Specifi cation
SUPER LONG FRONT
A Max. digging height 13.880 mm
B Max. dumping height 11.680 mm
C Max. digging depth 11.510 mm
D Max. digging reach 15.250 mm
E Max. digging reach at ground level 15.190 mm
F Min. swing radius 3.990 mm
0 m1 m2 m3 m4 m5 m6 m7 m8 m9 m10 m11 m12 m13 m14 m15 m16 m
-0 m
1 m
2 m
3 m
4 m
5 m
6 m
7 m
8 m
9 m
10 m
11 m
12 m
13 m
14 m
-1 m
-2 m
-3 m
-4 m
-5 m
-6 m
-7 m
-8 m
-9 m
-10 m
-11 m
-12 m
AB
C
D
E
F
Working range PC210LC/NLC-8 Super Long Front
27
Lifting capacity PC210LC/NLC-8 Super Long Front
A
B
C
When removing bucket, linkage or cylinder, lifting capacities can be increased by their respective weights.
– Reach from swing center
– Bucket hook height
– Lifting capacities, including bucket (367 kg)
– Rating over front
– Rating over side
– Rating at maximum reach
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on SAE Standard No. J1097.
Rated loads do not exceed 87% of hydraulic lift capacity or 75% of tipping load.
Lifting capacity table is published for guidance only, the machine is not intended for use as a crane.
14,0 m 12,0 m 10,0 m 8,0 m 6,0 m
10,0 m kg 950* 950* 1.750* 1.750*
6,0 m kg 950* 950* 2.050* 1.750 2.050* 2.050*
3,0 m kg 1.000* 1.000 1.500* 1.100 2.400* 1.550 2.650* 2.250 3.100* 3.100* 3.950* 3.950*
0,0 m kg 1.200* 950 1.650* 1.000 2.400 1.400 3.200 1.950 4.200* 2.800 5.900* 4.200
-3,0 m kg 1.550* 1.000 2.250 1.250 3.000 1.750 4.200 2.450 6.450 3.700
-6,0 m kg 2.250 1.250 2.250 1.250 2.950 1.700 4.100 2.350 6.400 3.650
-9,0 m kg 3.400 2.000 4.250 2.550 6.050 3.900
With 700 mm shoesPC210LC-8
12,0 m kg 1.050* 1.050* 1.200* 1.200*
10,0 m kg 950* 950* 1.750* 1.750*
6,0 m kg 950* 900 2.050* 1.400 2.050* 2.050*
3,0 m kg 1.000* 750 1.500* 800 2.400* 1.200 2.650* 1.800 3.100* 2.700 3.950* 3.950*
0,0 m kg 1.200* 650 1.650* 700 2.250 1.050 3.100 1.500 4.200* 2.200 5.900* 3.350
-3,0 m kg 1.550* 700 2.150 900 2.850 1.300 4.000 1.900 6.200 2.850
-6,0 m kg 2.150 950 2.150 900 2.800 1.250 3.900 1.800 6.100 2.800
-9,0 m kg 3.250 1.550 4.100 1.950 6.050* 3.050
-10,0 m kg 3.750* 2.050 3.800* 2.100 5.350* 3.200
14,0 m 12,0 m 10,0 m 8,0 m 6,0 m
With 500 mm shoesPC210NLC-8
A
B
Komatsu Europe
International NVMechelsesteenweg 586
B-1800 VILVOORDE (BELGIUM)
Tel. +32-2-255 24 11
Fax +32-2-252 19 81
www.komatsu.eu
Materials and specifi cations are subject to change without notice.
is a trademark of Komatsu Ltd. Japan.
UESS11005 01/2010
Printed in Europe – This specifi cation sheet may contain attachments and optional equipment that are not available in your area.
Please consult your local Komatsu distributor for those items you may require. Materials and specifi cations are subject to change without notice.
Standard and Optional Equipment
Your Komatsu partner:
PC210/LC/NLC-8Hydraulic Excavator
Further equipment on request
standard equipment optional equipment
ENGINEKomatsu SAA6D107E-1 turbocharged common rail
direct injection diesel engine
EU Stage IIIA/EPA Tier III compliant
Suction type cooling fan with radiator fl y screen
Automatic engine warm-up system
Engine overheat prevention system
Fuel control dial
Auto-deceleration function
Engine key stop
Engine ignition can be password secured on
request
Alternator 24 V/60 A
Starter motor 24 V/5,5 kW
Batteries 2 × 12 V/140 Ah
Diesel particulate fi lter
HYDRAULIC SYSTEMElectronic closed-centre load sensing (E-CLSS)
hydraulic system (HydrauMind)
Pump and engine mutual control (PEMC) system
One additional hydraulic circuit (optional with Super
Long Front)
5-working mode selection system; Power mode,
economy mode, breaker mode, attachment mode
and lifting mode
PowerMax function
Adjustable PPC wrist control levers for arm, boom,
bucket and swing, with sliding proportional control
for attachments and 3 auxiliary buttons
Prepared for hydraulic quick-coupler (not with
Super Long Front)
Additional hydraulic functions (not with Super Long
Front)
DRIVES AND BRAKESHydrostatic, 3-speed travel system with automatic
shift and planetary gear type fi nal drives, and
hydraulic travel and parking brakes
PPC control levers and pedals for steering and
travel
CABINReinforced safety SpaceCab™; Highly pressurised
and tightly sealed hyper viscous mounted cab with
tinted safety glass windows, large roof window
with sun shade, pull-up type front window with
locking device, removable lower window, front
window wiper with intermittent feature, sun roller
blind, cigarette lighter, ashtray, luggage shelf, fl oor
mat
Heated air suspension seat with lumbar support,
height adjustable arm rests and retractable seat
belt
Automatic climate control system
12 Volt power supply
Beverage holder and magazine rack
Hot and cool box
Radio
Lower wiper
Rain visor (not with OPG)
SERVICE AND MAINTENANCEAutomatic fuel line de-aeration
Double element type air cleaner with dust indicator
and auto dust evacuator
KOMTRAX™ - Komatsu satellite monitoring system
Multi-function video compatible colour monitor with
Equipment Management and Monitoring System
(EMMS) and effi ciency guidance
Toolkit and spare parts for fi rst service
Automatic greasing system
Service points
SAFETY EQUIPMENTRear view camera system
Electric horn
Overload warning device
Lockable fuel cap and covers
Audible travel alarm
Boom safety valves
Large handrails, rear-view mirrors
Battery main switch
Arm safety valve (not with Super Long Front)
OPG Level II front guard (FOPS)
OPG Level II top guard (FOPS)
LIGHTING SYSTEMWorking lights: 2 revolving frame, 2 cab roof (front),
1 boom (l.h.)
Additional working lights: 2 cab roof (front), 1 cab
roof (rear), 1 boom (r.h.), 1 counterweight (rear),
beacon
OTHER EQUIPMENTStandard counterweight
Heavy counterweight (with Super Long Front)
Remote greasing for swing circle and pins
Electric refuelling pump with automatic shut off
function
Standard colour scheme and decals
Parts book and operator manual
Biodegradable oil for hydraulic system
Customised paint
UNDERCARRIAGETrack roller guards
Track frame under-guards
STD, LC and NLC undercarriages
500, 600, 700, 800, 900 mm triple grouser track-
shoes
Full length track roller guards
WORK EQUIPMENTMono boom
Two-piece boom
Super Long Front boom and arm (15 m) (LC/NLC
only)
1,8 m; 2,4 m; 2,9 m arms
Bucket linkage with lifting eye
Komatsu buckets
Komatsu breakers