Post on 26-Feb-2020
transcript
2810
1760
3670
1300Tesmec S.p.A.HeadquartersVia Zanica, 17/O - 24050 Grassobbio (BG) - ItalyTel: +39.035.4232911 - Fax: +39.035.4522445
Manufacturing facilitiesVia Pertegalli, 2 - 24060 Endine Gaiano (BG) - ItalyTel: +39.035.825024 - Fax: +39.035.826375
Manufacturing facilitiesVia Don Brambilla, 26/28 - 23844 Sirone (LC) - ItalyTel: +39.031.858311 - Fax: +39.031.853562
Ed. 2015/2016
Keep you updated on: www.tesmec.com
PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE
ISO 9001:2008Certified Quality System
Hydraulic Puller-TensionerAFS303
The machine is suitable to string one rope or one conductor.The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.The machine is completely electronically controlled.
ConfigurationNegative self-acting hydraulic brakeHydraulic dynamometer with set-point and automatic control of maximum pullHydraulic oil cooling systemDigital meter counterControl instruments for hydraulic system and Diesel engineRigid axle for towing at max speed of 30 km/h with mechanical parking brakeHydraulic power pack to control 1 drum stand with hydraulic motor or 1 reel winderGearbox with 3 operating positions:• neutral position (with free bull-wheels
for conductor loading and unloading)• low tension position (1÷5 kN)• nominal tension positionElectronic pull and speed recorder kit (instrument not included) Hydraulically actuated front plough stabiliserGrounding connection point
Hydraulic TransmissionClosed hydraulic circuit that allows stepless speed variation in both rotating directions.This machine is provided with a pull pre-setting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
CharacteristicsBull-wheel diameter 1500 mmMax conductor diameter 36 mmMax rope diameter 10 mmMass 2300 kg
EngineDiesel 34 kW (46 hp)Cooling system waterElectrical system 12 V
Tensioner PerformanceMax tension 25 kNMax speed 5 km/hNote: the basic machine performance is calculated at 20°C and at sea level
Available Devices
ALL005 Hydraulic power for an external compressor
ALL037 Preheating device for use up to -30°C
ALL051 Cable remote control kit (instrument not included)
ALL059 Radio remote control kit (instrument not included)
ALL071 Hydraulic rope/conductor clamp for reel/drum change operations
ALL089 Electronic arrangement for connection of multiple machines and for stringing synchronization
Puller PerformanceMax pull 25 kNSpeed at max pull 2.5 km/hMax speed 4.25 km/hPull at max speed 15 kN
Special Light Version Mod. AFS301With hydraulic control and 25 kW engine