CBXHydraulics

2

Anti-pollution technology ...

Spill-free to ensureoperator safety - no discharge and no work place

contamination,

- protection for tools andproduction.

Flat faces to guarantee theintegrity of fluids - no pollution enters your circuits.

Excellent mechanicalstrength The robust construction with longplug guiding in the socket, in theconnected position provides theCBX with great strength towithstand high mechanical stresses(vibrations, oscillations, etc).

• mineral or synthetic oil,

• lubricating oil

A wider range The CBX is now available in 4 nominal bores:3, 6, 9,12 and 16 mm.

3

... servicing your hydraulic applications

Push; and it’s connected Automatic locking CBXs giveyou ever easier handling.

A concept that is especiallysuitable for:- blind connection,- repeated connections.

Compact design Especially suitable for difficultaccess situations.

Efficiency Maximum flow in the smallestsize.

3D-files available on request.

Ease of connection • Front sealing by a seal fitted into the back adapter on all cylindrical male plugs (except built-in).

• Sealing by sealing-kit KESring possible on all cylindricalmale sockets.

Technical data

CBX 03 CBX 06 CBX 09 CBX 12 CBX 16

Max. working pressure (bar) 450 180 180 180 180

Bore diameter (mm) 3 6 9 12 16

Shut-off double

Constructionstainless steel + brass - � � - -

100% stainless steel � BF code BF code � �

SealingSeals: • Nitrile (NBR)• Fluorocarbon (FPM)• Perfluoroelastomer (FFKM) in the fluid jet

Other seal material available on request.

4

Working temperatures

Without dust cap

5

Type of flow Type of seal Working temperatures (°C)

Hydraulic and mineral oils Nitrile (NBR) - 15 to + 100 °C

Heat transfer oilFluorocarbon (FPM) - 10 to + 200 °CPerfluoroelastomer (FFKM) 0 to + 250 °C

Working temperatures for dust caps in Choroprene (CR): - 20 to + 100 °C

For other temperatures, consult us.

6

Speed of flow less than or equal to 5 m/s: - all seals

Speed of flow between 5 and 10 m/s: - Nitrile and Fluorocarbon seals- temperatures �) 60 °C

Hydraulic flow rate / pressure drop charts

Flow (l/min)

Pre

ssur

e d

rop

(bar

)

Flow (l/min)

Pre

ssur

e d

rop

(bar

)

CBX 09 to CBX 16

CBX 03 and CBX 06

Test conditions: - Fluid: water- Direction of flow:

plug socket

CBX 03 CBX 06 CBX 09 CBX 12 CBX 16

5 2 8,5 19 34 60,5

10 4 17 38 68 121

Speed(m/s)

Flow(l/mn)

Designation Part-numbersDimensions (mm)

L1 L2 H/flatsEnd connection

7

Sockets

Model

CBX 03.1100

CBX 03.1200

48,5 13

46,5 13

G 1/8

NPT 1/8

CBX 03 1. Female thread

CBX 06.1101

CBX 06.1102

CBX 06.1201

61 20

65 21

61 17

G 1/4

G 3/8

NPT 1/4

CBX 06 1. Female thread

CBX 09.1102

CBX 09.1202

75,5 24

75,5 24

G 3/8

NPT 3/8

CBX 09 1. Female thread

CBX 12 CBX 12.1103

CBX 12.1203

103 27

103 27

G 1/2

NPT 1/2

1. Female thread

CBX 12.1153109 14 27G 1/22. BSP male thread with 60° cone

CBX 09.115282 12 24G 3/82. BSP male thread with 60° cone

8

Designation Part-numbersDimensions (mm)

L1 L2 H/flatsEnd connection

Sockets

Model

CBX 16 CBX 16.1104130 36G 3/41. Female thread

CBX 16.1155137 20 41G1

Ø 5

3,5

2. BSP male thread with 60° cone

9

Plugs

CBX 03.7150

1. Female thread CBX 06.7101

CBX 06.7102

CBX 06.7201

G 1/4

G 3/8

NPT 1/4

CBX 06.715154 10 17

CBX 09.7102

CBX 09.7202

CBX 09.7152

CBX 03

CBX 06

CBX 09

1. Female thread

2. BSP male thread with 60° cone and integrated tightness

CBX 06.515160,5 11 17 213. Built-in, BSPmale thread with 60° cone

1. Female thread

2. BSP male thread with 60° cone and integrated tightness

CBX 09.51523. Built-in, BSPmale thread with 60° cone

2. BSP male thread with 60° cone and integrated tightness

CBX 03.51503. Built-in, BSPmale thread with 60° cone

Designation Part-numbersDimensions (mm)

L1 L2 H/flats H1/flats H2/flatsEnd

connectionModel

G 1/8

NPT 1/8

43,5 13

41,5 13

CBX 03.7100

CBX 03.7200

G 1/8 39,5 8 13

G 1/8 46 8 13 15

59 17

61 21

58 17

G 1/4

G 1/4

G 3/8

NPT 3/8

71 23

70 23

G 3/8 67 11 23

G 3/8 72 12 23 27

10

Designation Part-numbersDimensions (mm)

L1 L2 H/flats H1/flats H2/flatsEnd

connection

Plugs

CBX 12

Model

CBX 12.7103

CBX 12.7203

90 30

90 30

G 1/2

NPT 1/2

CBX 12.715385 14 30G 1/2

CBX 12.515396 14 30 34G 1/2

2. BSP male thread with 60° cone and integrated tightness

CBX 16 CBX 16.7104105 38G 3/4

CBX 16.5154111,5 16 38 46G 3/4

1. Female thread

CBX 16.7154

CBX 16.7155

100,5 15 38

105,5 20 41

G 3/4

G 1

2. BSP male thread with 60° cone and integrated tightness

1. Female thread

3. Built-in, BSP male threadwith 60° cone

CBX 12.716389 15 30R 1/24. BSP conical male thread

3. Built-in, BSP male threadwith 60° cone

11

KES sealing-kit Possible on all the BSP male threaded sockets.Part-numbers of the KES sealing-kits: G 3/8 KES 01.9102G 1/2 KES 01.9103

Available in 2 different types of seals:no code: Nitrile sealJV code: Fluorocarbon seal

Sealing Fluorocarbon (FPM) and Perfluoroelastomer(FFKM) seals are available on all models. Add the corresponding code to the socketand plug part-numbers:JV: Fluorocarbon seals JKV: Perfluoroelastomer seals

(in the fluid jet)Ex.: CBX 09.1102/JV

Protective dust caps

Plug dust cap part-numbers: CBX xx.8550

Socket dust cap part-numbers: CBX xx.8500

100% stainless steel CBX 06 and CBX 09 Add the code BF to the concerned part-numbersof the sockets and the plugs.Ex.: CBX 06.1101/BF - CBX 06.7151/BF

Overall dimensions in coupled positionL = (L1 socket + L1 plug) – X

Model X (mm)CBX 03 18,6CBX 06 24,7CBX 09 33

Model X (mm)CBX 12 46CBX 16 57,6

We reserve the right to modify product specification without prior notice.

Staubli is a trademark of Stäubli International AG, registered in Switzerland and other countries.© Stäubli, 15/03/2012

International sales coordinationStäubli Faverges - BP 70 - F - 74210 FavergesTel.: +33 (0) 4 50 65 67 97 - Fax: +33 (0) 4 50 65 60 69e mail: connectors.sales@staubli.com

D 4

15

.00

e B

www.staubli.com

Stäubli unitsConnectors distributors

BrazilTel.: +55 11 2348 7400connectors.br@staubli.com

North America(USA, Canada, Mexico)Tel.: +1 864/433-1980connectors.usa@staubli.com

PortugalTel.: +351 22 978 39 56/50connectors.pt@staubli.com

RomaniaTel.: +40374040494connectors.ro@staubli.com

RussiaTel.: + 7 812 3344630connectors.ru@staubli.com

SpainTel.: +34 937 205 405connectors.es@staubli.com

SwitzerlandTel.: +41 (0)43/244 22 33connectors.ch@staubli.com

United KingdomTel.: +44 (0)1952 671 918connectors.uk@staubli.com

BelgiumTel.: +32 (0)56 36 40 03connectors.be@staubli.com

Czech Republic, Slovakia, HungaryTel.: +420 466 616 125connectors.cz@staubli.com

FranceTel.: +33 (0)1 69 93 25 00srf@staubli.com

Germany, AustriaTel.: +49 (0)921/883-80connectors.de@staubli.com

ItalyTel.: +39 (0)362/944.1connectors.it@staubli.com

PolandTel.: +48 42 636 85 04connectors.pl@staubli.com

ChinaTel.: +86 571 86912161connectors.cn@staubli.com

Hong KongTel.: +852-2366 0660connectors.hk@staubli.com

JapanTel.: +81 6 6889 3308connectors.stkk@staubli.com

SingaporeTel.: +65 / 6266 0900connectors.sg@staubli.com

South KoreaTel.: +82 53 753 0044connectors.kr@staubli.com

TaiwanTel.: +886-2-2568 2744connectors.tw@staubli.com

TurkeyTel.: +90 212/472 13 00connectors.tr@staubli.com