Post on 25-May-2015
description
transcript
.in...
automotiveCosts less. Lasts longer. More lightweight.
...09.2011...plastics for longer life®...
...www.igus-automotive.com...
®
2 3
It could not be easier!The public debate on the greenhouse effect and the resulting emission limits have incre-ased the pressure on car manufacturers to save as much weight as possible in every component. Every gram counts. iglidur® polymer bearings reduce weight at every bearing point compared to metal solutions by a factor of 7.
There couldn‘t be any lighter. Find out more details on page 20.iglidur® plain bearings are already used in automobiles several mil-lion times. On the following pages you will find some amazing ap-plications with extreme requirements that are implemented with our high-performance polymers. In addition to weight, issues such as:
wear resistance noise corrosion costs
often speak for the use of iglidur® plain bearings.Use our onlinettols on www.igus.in/automotive, contact us di-rectly to design your customized bearings solution with iglidur®.
Enjoy reading and getting ideas.
YoursDeppak Paul
Phone: +91-80-39127812 Cell: +91-9880771105Email: deepak@igus.in
Ordering timesFrom Monday to Friday 7:00 am - 8:00 pmSaturday 8:00 am - 12:00 pm
HotlinePhone +91-80-39127800Fax +91-80-39127802
OnlineSee www.igus.in/automotive. There you can find more informations.
You have questions?For questions and more information call us or use our onlinetools on www.igus.eu.
...automotive...
igus® catalog product rangeExcerpt of catalog on next pages, order igus® catalogs online www.igus.in/catalog
0
1
2
3
4
6
8
5
9
7
alum
iniu
m
...lightweight...light construction with iglidur®
Besides the advantages of dynamic driving, strict environmental and emissions standards compel car manufacturers to keep the weight of every component to the minimum. By the replacement of metallic plain bearings by iglidur® plain bearings, enormous weight advantages can be immediately achieved.
Metallic burnished DU bearings in comparison to iglidur®
dens
ity [g
/cm
3 ]
material0
1
2
3
4
6
7
5
8
PAF2
0115
P10
FRP
M20
20D
X
2020
DU
E5A
iglid
ur® G
iglid
ur® J
iglid
ur® M
250
bron
ce
stai
nles
s st
eel
cons
truc
tion
stee
l
iglid
ur® P
olym
ers
oak
woo
d (a
ir dr
ied)
PU
R ri
gid
foam
material
The weight of a DU bearing is equal to the weight of seven iglidur® bearings
2
4 5
...where you can find igus in car?...Maintenance- and lubrication-free iglidur® Polymer Bearings are in use in many areas of cars
WINDSHIELD WIPER:Arm and blade, kinematics
Self-lubricating Quiet operation Can be used with standard bar shock shafting Suitable for E-coating No special requirement for rivet / shaft
HINGES:Door hinges, Multi-articulation hinges
High compressive strength High wear resistance Suitable for E-coating Corrosion resistant Economically priced
SEATS:Lift links, headrest, gears
Quiet operation High static load Can be used with bar shock shafting Suitable for E-coating Low precision shafting possible
CHASSIS:Shock absorber, brakes, control arms
High compressive strength Damping Resistant to dirt Economically priced
WINDSHIELD WIPER:Arm and blade, kinematics
Corrosion resistant Highly flexible strength Resistant against dirt Economically priced
STEERING SYSTEM:Shaft and column
Low coefficient of friction Can be used with bar shock shafting High rigidity No need for polished shafting
FOOT PEDALS:Pedal, angle transmitter, sensors
Quiet operation Can be used with bar shock shafting Low precision shafting possible
GEAR BOX:Actuator and fork
Vibration damping Resistant to gear oils Long term operating temperature up to 200 °C Economically priced
ENGINE COMPARTMENT:Variable air intake, EGR (exhaust gas re-cir-culation), belt tensioner, throttle valve
Long term operating temperature up to 250 °C Resistant to fuel, gear oils, brake fluids, etc. Over moulding with plastic possible Good vibration damping characteristics
R 1 3 5
2 4 6
®
6 7
...100% lubrication-free...What is iglidur® and what can it do?
What is iglidur®? iglidur® polymers are enhanced by precisely matched reinforced and solid lubricant additives, tested thousands of times and proven over mil-lions of cycles. The individual components are not simply applied by coating but are homoge-neously blended. This means that there is no anti-friction film which can be forced apart under pressure, as is the case of traditional solutions incorporating “hard shell – soft coating”.
iglidur® plain bearings have a homogenous structure. Basic polymer, composite fibres and solid lubricants complement each other.
iglidur® Compounds: Basic polymers with fibres and solid lubricants, magnified 200 times, dyed.
What can iglidur® achieve in automotive applications?
Low weight Great price-service life ratio for your application Tailor-made materials and solutions Low clearance bearings, exactly designed for
your housing bore and shaft tolerance Recalibrated bearings for equalizing tolerances
on punched bores Preloaded bearings for equalizing tube tole-
rances for pedal systems Bearings with special damping action for
bearing assemblies for control forks in trans- missions
Self-lubricating bearings insensitive to dirt in the suspension system
One-stop shopping: research and develop- ment, application assistance, production, installation and worldwide logistics
Quality from the igus® laboratory
Oscillating wear test rig for te-sting the wear in oscillating mo-vements at medium loads
igus® test laboratoryApplications involving high cycle counts, speeds and accelerations or de-manding environmental conditions require proven systems especially when it comes to e-chains®, cables, polymer slide bearings and linear systems. igus® regularly conducts tests at its own laboratory under realistic condi-tions. Every year, we conduct more than 2,000 tests on e-chains® and cables, and over 5,000 tests on plain bearings.
Measurement of the inner diame-ter of a pressfit plain bearings
8 9
Precisely calculable material properties
iglidur® plain bearings mean a step up from the plastic bush to a tested and calculable bearing element. Probably the world’s largest database for polymer plain bearings can help you to select the optimum material for your application.
The igus® most wear-resistant material Shafts may also be rougher
1
10
100
4520105
iglidur® G iglidur® P iglidur® Ziglidur® J iglidur® V400 iglidur® Qiglidur® W300
load [MPa]
wear of iglidur® bearings at medium and high loads
0,0
0,1
0,2
0,3
0,4
0,5
0,0 0,5 1,0 1,5 2,0
Shafts which are too smooth are frequently unfavou-rable and may lead to stick-slip phenomena and noise
coef
ficie
nt o
f fric
tion
[µ]
Ra [µm]
Coefficient of friction as function of the shaft surface (shaft Cf53)
The best bearings for your shaft Reliable database: Thousands of test results
Wear of iglidur® G with various shaft materials (rotating 0.3 m/s, 1,0 MPa). At low loads, it is frequently possible to work with low-cost shaft materials.
0,0
1,0
2,0
5,0
6,0
8,0
543210
7,0
3,0
4,0
Vers
chle
iß [µ
m/k
m]
Belastung [MPa]
Cf53 V2A St37 hartverchromt
0 1 2 3 5
9
8
7
6
5
4
3
2
1
04
Vers
chle
iß [µ
m/k
m]
Belastung [MPa]
Cf53 V2A St37 hartverchromt
0,0
0,1
0,2
0,3
0,4
0,5
100 20 30 40 50 60 8070
Rei
bwer
t µ
Belastung [MPa]
0,0
0,5
1,0
1,5
2,0
2,5
3,0
3,5
4,0
4,5
Vers
chle
iß [µ
m/k
m]
Aut
omat
enst
ahl
Alu
, har
tano
dis.
Cf5
3, h
artv
erch
rom
t
Results of over 5,000 tests per year are incorporated in the iglidur® database.
wea
r [µ
m/k
m]
wea
r [µ
m/k
m]
26 Online tools, special websites and Online Shop
...igus.online...®
A selection of important Online-ToolsQuickBearingiglidur® product finder
QuickLifeiglidur® lifetime calculation
QuickBearing.customStock bars product finder
www.igus.in/iglidur-productfinder www.igus.in/iglidur-expert www.igus.in/stockbar-productfinder
QuickLifeHalbzeuge lifetime calculation
QuickSpecialcustomized molded parts
QuickBearingigubal® product finder
www.igus.in/stockbar-expert www.igus.in/speedigus www.igus.in/igubal-productfinder
QuickLifeigubal® lifetime calculation
QuickCADdrylin® CAD configurator
QuickLifedrylin® lifetime calculation
www.igus.in/igubal-expert www.igus.in/drylin-CAD www.igus.in/drylin-expert
QuickLindrylin® W configurator
QuickFinddrylin® pro-ductfinder drive technology
QuickLifexiros® lifetime calculation
www.igus.in/drylinW-configurator www.igus.in/sht-productfinder www.igus.in/xiros-expert
Special website for automotiveYou can find information, applica-tions, videos and product details for automotive on www.igus.in/automotive
...predictable...C
f53
Cf5
3 ha
rdch
rom
ed
HR
Car
bon
Ste
el
304
SS
Hig
h gr
ade
Ste
el
Aut
omat
ic S
crew
Ste
el
H.A
. Alu
min
ium
10 11
M250
...100% lubrication-free...iglidur® materials for automotive
Shipping after: 24 – 48h www.igus.in/iglidur
The most important materials for automotive applications are listed below. We have subdivided the mate-rials into “groups” so as to make your choice easier. Over 7,000 standard sizes from Ø 2 mm to 150 mm are available from stock, in over 30 materials. Inch sizes are also available from stock. Short delivery times for special sizes.
Eco
nom
y
GLW
RN56
iglidur® M250 Excellent vibration dampening Resistant to edge loading Cost-effective
The economical solution for high quantities Short gliding travels, high static loads Suitable for E-coating Applications: e.g. seats
iglidur® RN56 Suitable for E-coating Resistant to dirt Cost-effective
G
Bas
ic
J
RN89
iglidur® G – The general purpose bearing Higher wear-resistance than iglidur® GLW Suitable for E-coating Applications: convertible tops, fittings
iglidur® J Best friction values for dry running Good glide surface also for all “soft” materials Applications: with quick rotation; seat adjust-
ment and mirror actuators
iglidur® RN89 Conductive material for all applications with
E-coating Applications: Seat and convertible top systems
H2
iglidur® H2: For high temperatures High chemical-resistance Cost-effective
P210
Spe
cial
ists
J350
RN248
iglidur® P210 Even for soft shafts Low wear Low friction
iglidur® J350 Temperature resistant Wear resistant Impact resistant
iglidur® RN248 Suitable for E-coating Extremely conductive Wear resistant
H4
Pre
miu
m
X
iglidur® H4 Resistant to all fuels, gear oils and brake fluid Minimum moisture absorption Applications: throttle valves, intake manifolds
iglidur® X - material for high temperatures High compressive strength High chemical resistance Long term appl. temperature: +250 ˚C
??C
usto
miz
ed
Customised: Individually matched materials with special pro-perties: we develop the plastic which your ap-plication needs. We find the optimum solution together with you.
12 13
...material data...General properties Mechanical properties Physical and thermal
propertiesElectrical properties
wear, different shaft materials, oscilla-ting, p=1 MPa, v=0,01 m/s
wear, different shaft materials, rotating p=1 MPa, v=0,3 m/s
Den
sity
[g/c
m3 ]
Max
. moi
stur
e ab
sorp
tion
at +
23 °
C/5
0 %
r. h
. [%
w
eigh
t]
Max
. moi
stur
e ab
sorp
tion
[% w
eigh
t]
Coe
ffici
ent o
f slid
ing
fric
tion.
dyn
amic
ag
ains
t ste
el [µ
]
pv v
alue
. max
. (dr
y) [M
Pa
· m/s
]
Fire
cla
ssifi
catio
n
Mod
ulus
of e
last
icity
[MP
a]
Tens
ile s
tren
gth
at +
20 °
C [M
Pa]
Com
pres
sive
str
engt
h (a
xial
) [M
Pa]
max
. per
mis
sibl
e st
atic
sur
face
pre
ssur
e (+
20 °
C) [
MP
a]
Sho
re-D
hard
ness
Max
. lon
g te
rm a
pplic
atio
n te
mpe
ratu
re [°
C]
Max
. sho
rt te
rm a
pplic
atio
n te
mpe
ratu
re [°
C]
Min
. app
licat
ion
tem
pera
ture
[°C
]
Spe
cific
vol
ume
resi
stan
ce [!
cm]
Sur
face
resi
stan
ce [!
]
H. a
. alu
min
um
Aut
omat
ic s
crew
ste
el
Cf5
3
HR
car
bon
stee
l
304
SS
Hig
h gr
ade
stee
l
H. a
. alu
min
um
Aut
omat
ic s
crew
ste
el
Cf5
3
HR
car
bon
stee
l
304
SS
Hig
h gr
ade
stee
l
iglidur® M250 1,14 1,4 7,6 0,18-0,40 0,12 V-2 2700 112 52 20 79 +80 +170 -40 > 1013 > 1011 12,9 9,5 10,9 12,9 11,2 11,2 2,5 3,0 5,82 2,26 2,7 5,2
iglidur® GLW 1,36 1,3 5,5 0,1-0,24 0,3 HB 7700 235 74 80 78 +100 +160 -40 > 1011 > 1011 4,5 17,1 5,0 22,0 18,5 1,5 11,7 98,1 9,3 28,5 14,2 16,5
iglidur® RN56 1,47 0,7 4,0 7500 200 80 80 +130 +220 -40 > 1013 > 1011 5,3 3,7 13,7 14,9 15,4
iglidur® G 1,46 0,7 4,0 0,08-0,15 0,42 HB 7800 210 78 80 81 +130 +220 -40 > 1013 > 1011 1,9 12,0 2,7 19,0 2,5 1,9 1,0 4,3 2,7 1,88 11,9 7,6
iglidur® J 1,49 0,3 1,3 0,06-0,18 0,34 HB 2400 73 60 35 74 +90 +120 -50 > 1013 > 1012 0,6 4,7 1,1 1,3 1,0 1,9 0,3 1,2 0,4 0,57 0,5 0,6
iglidur® RN89 1,44 0,9 3,9 5900 150 45 79 +90 +170 -40 > 104 > 104 3,4 4,0 1,5 1,4 0,7 0,5 0,2 0,9 1,5 0,7 2,7 1,7
iglidur® H2 1,72 0,1 0,2 0,07-0,30 0,58 V-0 10300 210 109 110 88 +200 +240 -40 > 1015 > 1014 4,5 18,7 14,6 32,3 6,4 8,5 14,6 4,8 18,76 11,9 18,3 3,8
iglidur® P210 1,40 0,3 0,5 HB 2200 65 50 75 +100 +160 -40 - > 1011 1,9 1,86 0,9 1,9 1,0 1,9 0,6 0,7 0,4 4,3 1,0 0,4
iglidur® J350 1,44 0,3 1,6 0,08-0,2 0,45 V-0 2000 55 60 60 80 +180 +220 -100 >1013 > 1010 0,3 5,36 0,9 2,58 0,6 0,9 2,67 2,4 1,34 1,34 1,72 1,14
iglidur® RN248 1,25 1,4 7,6 2700 99 50 - +90 +170 -40 < 103 < 109 1,0 4,0 6,0 2,0 4,0
iglidur® H4 1,79 0,1 0,2 0,08-0,25 0,70 V-0 7500 120 50 65 80 +200 +240 -40 > 1013 > 1012 2,6 7,7 2,1 4,3 1,7 2,2 6,3 3,2 2,2 2,1 9,6 5,9
iglidur® X 1,44 0,1 0,5 0,09-0,27 1,32 V-0 8100 170 100 150 85 +250 +315 -100 < 105 < 103 12,6 6,3 5,3 9,9 8,0 9,0 20,5 1,9 8,1 5,1 5,9 12,2
PA 6 1,14 2,8 8,5 V-2 3200 +85 +160 -40 1015 1013 39,3 19,9 34,9
PBT 1,30 0,3 0,5 HB 10000 85 +110 +200 1013 1015 9,9 50,6 36,7
POM 1,41 0,2 0,8 HB 1900 97 23 23 78 +90 +120 -50 > 1012 > 1012 3,7 1,7 1,7
PTFE 2,18 0,1 0,1 V-0 14 51 +260 +300 -200 1016 1016
PEEK 1,31 0,20 0,45 V-0 - 140 +250 +310 5,2 7,7 3,7
14 15
...interior...Seating
Rattle-free mounting of seating systems with iglidur® plain bearings, e.g. inner-/tilt- and seat height adjustment.
Tolerance compensation possible Suitable for E-coating High static loads of up to 120MPa Quiet operation
Conventible systems | multihinges
All articulation points are furnished with iglidur® bearings.
Self-lubricating, maintenance-free Corrosion-free Quiet operation Suitable for E-coating
Hinges
iglidur® is used in door and multiple-joint hinges, such as in the trunk, hood, pedestrian protection, etc.
Corrosion-free Tolerance compensation possible Suitable for E-coating Quiet operation
Pedal
Steerings
Armrests
Axial and radial prestressed iglidur® plain bea-rings avoid vibrations and noises.
Tolerance compensation possible Resistant to edge load High static loads
Various bearing points in steering columns and steering shafts can be equipped with iglidur® plain bearings.
Noise dampening High resistance to stock loads Wear-resistant Cost-effective
drylin® linear guides replace telescopic guides. High rigidity Easy assembly Lubrication-free
16 17
...engine compartment...Shift forks
In gear links and shift forks, iglidur® plain bea-rings replace metal bearings and roller bearings.
Noise dampening Contact with transmission oil Corrosion-resistant
Throttle Bodies
iglidur® plain bearings replace needle bearings. Cost-effective Capable of overmolding with plastics
Aktive intake manifolds
Flap mounting of variable intake manifolds with iglidur® plain bearings.
Economic product design, e.g. pillow blocks Tolerance compensation by means of an
O-ring
belt tensions
valve (FGR and Turboloader)
iglidur® plain bearings run with an assembly lub-rication provided under extreme operating con-ditions.
High-frequency oscillating motion Heavy dirt accumulation Temperature from - 40 up to + 120 °C
iglidur® bearings in short stroke linear movements with extremly smut contamination due to exhaust emission and high temperatures.
Low friction Wear resistance High temperature resistance
Guide troughs made of iglidur® materials are used in high frequency short stroke movements up to 50Hz.
Wear-resistant Fulfills cleanliness requirements Fulfills high accuracy requirements
ABS pump
18 19
...exterior...Chassis
iglidur® slide bearings replaces roller bearings and POM ball sockets in heavily stressed axle journals.
High absorption Low sticking friction High compression strength Lightweight
Brake calipers
iglidur® plain bearings replace metallic bearings for use under extreme conditions – no knocking under extreme vibrations.
High media resistance Lightweight Cost-effective
Windshield wiper
iglidur® plain bearings replace metallic bearings on wiper blades and arms.
High alternate bending strength Corrosion-free High compressive strength Media resistance
Mirror adjustment
Truck Cabs
Lift gates
iglidur® thrust washers replace metallic bearings and simple plastics.
Low sticking friction Quiet operation Special design possible
iglidur® plain bearings often replace metallic be-arings in the hinge eyes of hydraulic dampers.
Low sticking friction Good vibration dampening Resistant to dirt Corrosion-free
iglidur® plain bearings replace metallic bearings and systems with central lubrication.
Withstand extremely high edge loads Lubrication-free Resistant to dirt High wear-resistance
20 21
...clip on... ...customized...Solutions for individual requirementsSolutions for punched sheets
iglidur® easyclip Easy axial push-in Axial safety through the 2nd flange Simple installation by wrapping Singly one-side thrust surface
iglidur® MDM double flange bushing
Compress and slide in Loss-proof pre-assembly “Right” axial thrust surfaces
on both sides Flanging not required
iglidur® MKM flange bushing “Right” axial thrust surfaces on
both sides Simple, automated flanging Tolerance compensation through
axial pretension
iglidur® SnapOn Washer is pre-assembled on
bushing with undercut Axial compensatory of tolerance Loss-proof pre-assembly
Everything is possible – iglidur® specials and solutionsSpecial design solutions such as non-clatter + low-play bearings, axial tolerance compensation, anti-rotation, knurled surfaces, lubrication pockets – virtually anything is possible.
What is speedigus? Simple; choose any iglidur® material, get moulded parts in 1 to 10 days, depending on complexity of the part. Full technical component information given with every quotation, including leadtime options. Absolute maximum delivery is 15 days.
QuickSpecialCustomized bearing parts
www.igus.in/speedigus
22 23
solutions for E-coating processes
Low clearance iglidur® bearing by recalibration during E-coating processSeating, convertible systems and articulation joints often use simple punched housings or drawn sheet metal. Nevertheless there should be a low clearance bearing to obtain quiet operation.
Our solution is:iglidur® bearings use the high temperatures of the e-coating process to calibrate the bearing.
Poor tolerance of punched housing or drawn sheet metal
Assembly of shaft/rivet with overlap fit
Recalibration during drying process (max. 60 minutes at max. 220 °C)
Assembly of iglidur® bearing with transition fit
e-coating process
Result: Low clearance bearing in spite of poorly toleranced housing bore/shaft
1
3
5
2
4
6
H10/H11
F=0
...low clearance...
0
1
2
3
4
6
8
5
9
7
alum
iniu
m
...lightweight...light construction with iglidur®
Besides the advantages of dynamic driving, strict environmental and emissions standards compel car manufacturers to keep the weight of every component to the minimum. By the replacement of metallic plain bearings by iglidur® plain bearings, enormous weight advantages can be immediately achieved.
Metallic burnished DU bearings in comparison to iglidur®
material
The weight of a DU bearing is equal to the weight of seven iglidur® bearings
0
1
2
3
4
6
7
5
8
PAF2
0115
P10
FRP
M20
20D
X
2020
DU
E5A
iglid
ur® G
iglid
ur® J
iglid
ur® M
250
bron
ce
stai
nles
s st
eel
cons
truc
tion
stee
l
iglid
ur® P
olym
ers
oak
woo
d (a
ir dr
ied)
PU
R ri
gid
foam
material
24 25
...available from stock...Maintenance and lubrication-free spherical bearings
Maintenance-free igubal® spherical bearings in diameters from 2 to 50 mm
Resistant to chemicals and corrosion
Very good vibration dampening
High frequencies and speeds possible
Predictable lifetime
igubal® is a system of self-aligning bearing elements completely made of plastic.
With the igubal® type series, a complete system of self-aligning bearing elements are available for the design engineer: Rod end bearings, clevis joints, flange bearings, spherical bearings and pillow block bearings.
Self-aligning bearings are easy to mount, suit all angular variations and in many cases have already been able to replace special housings.
The igubal® user utilizes all advantages of the employed high performance plastics. They have excellent vibration dampening properties, and are technically applicable in dry operation. They are insensitive to dirt, can operate in liquids and even in chemicals and are completely resistant to corrosion.
Maintenance and lubrication-free spherical bearings
Rod ends with male/female thread; left and right hand, HT version for up to +200°C
angle and axial joints, fitting srews
Clevis joints and spring loaded pins, single-pieced or in combination (also with rod ends)
Different types of pillow block bearings, with splitted housing and/or balls (optional)
Flange Bearings with 2 or 4 mounting holes, HT version for up to +200°C
Spherical bearings and self-aligning Clip bearings
Spherical balls made from iglidur® materials
double joint bearings and steering rods
26 27
...lose weight easily...Turbochanger
igubal® double joint bars made of high-tempe-rature material replace metallic coupling bars for applications of up to 200 ˚C.
Good vibration damping characteristics HIgh long term application temperature High wear resistance
Gear box
igubal® double joint bars replace metallic connections.
Noise reduction Vibration damping High rigidity Cost-effective
Aktive intake manifolds
Polymer double joint bars replace mechanical joint bars.
Weight advantage up to 90% Low wear rates
igubal® double joint bars
-90%
igubal® polymer double joint bars as mechanical connecting element between 2 components.
Up to +250°C operating temperature
Lightweight Lubrication-free Corrosion-resistant Customised design rapid prototypes available in 5 days
Tensile stresses at ambient temperature Tensile stresses at 120°C
Compressive loads at ambient temperature Compressive loads at 120°C
Kra
ft lo
ad [N
]
Dehnung expansion [mm]0 1 2 3 4
0
200
400
1200
600
1000
800
0 1 2 3 40
500
2000
1000
1500
Kra
ft lo
ad [N
]
Dehnung expansion [mm]
Kra
ft lo
ad [N
]
Weg travel [mm]
0 1 2 3 40
500
1000
2000
1500
2500
0 0,5 1,5 2,0 2,50
200
400
600
1000
800
1,0
Kra
ft lo
ad [N
]
Weg travel [mm]
28 29
...gliding instead of rolling...drylin® linear and drive technology drylin® linear and drive technology
Same mounting dimensions as linear ball guides
Resistant to chemicals, corrosion and dirt
Light weight permits high frequencies and maximum accelerations
Impact and vibration resistant, quiet operation
Predictable lifetime
drylin® is a range of maintenance-free and lubricant-free linear bearings in four different type series. Besides the freedom from maintenance and lubricants, the main features include ruggedness and the insensitivity to dirt, water, chemicals, heat or impacts.
In addition the range is complemented by complete linear units with spindle drive or toothed belt, leadscrews nuts and threads, and new: drive technology - complete systems with linear axis and motor.
drylin® N low profile guide systems
drylin® N flat guides have an extremely low built.
100 % lubrication-free Lightweight and small construction height: 6-12 mm
Numerous carriage options – also with preload Interesting alternative to miniature ball guide systems
www.igus.in/in/drylinN
drylin® W-Profilführungen modular guide systems
drylin® W modular guide systems offer a large and complex modular system.
14 different profiles and more than 50 carriage options
Easy installation Versatile use, space saving and compact
www.igus.in/in/drylinW
drylin® T rail guide systems
drylin® T are the classical linear guides. 100 % lubrication-free Dimensions are identical to standard commercial ball guide systems
Automatic clearance adjustment High static load capacity
www.igus.in/in/drylinT
drylin® R round shaft guide systems
drylin® R as an alternative to ball linings. 100 % lubrication-free Same dimensions as standard ball bearings Shafts, supports and accessories available from stock
Changeable liners
www.igus.in/in/drylinR
30 31
...100% lubrication-free...drylin® leadscrew drives
Convert a rotary motion into a translational motion.
100 % lubrication-free Trapezoidal or high helix thread Optionally clearance-free through anti-backlash feature
www.igus.in/in/drylinTR
drylin® SHT linear slide tables
Linear slide modules drives with trapezoidal thread, high helix thread or gear belts.
100 % lubrication-free For size-adjustments as far as fast small-part-handling
Numerous accessories
www.igus.in/in/drylinSHT
drylin® E drive technology
drylin® E – “E” as in electric,in 3-4 days available
Complete systems: Linear axis plus motor, ready to fit
Lubrication-free, lightweight and silent Configuration online possible
www.igus.in/in/drylinE
Sliding instead of rolling – drylin® linear and drive technologyArm rests
drylin® linear guides replace telescopic guides. HIgh stiffness Easy assembly Lubrication-free
Sliding roof
Self-lubricating iglidur® plain bearings fitted in dry-lin® linear guides replace lubricated plastics.
Low sticking friction Resistance to dirt Low moisture absorption
32 33
...energy supply...from stock...Cable carriers and e-chainsystems® for modern machines
Designed to guide and protecte-chains® and e-chainsystems® are like the umbilical cords of modern machines. They reduce downti-mes and increase the service lives of cables and hoses.Plastic e-chains® have been developed, produced and tested by igus® since 1971.The igus® product range includes over 80,000 innovative products from stock and from „batch size one“. From the smallest Micro Flizz® chain to the world‘s biggest polymer e-chain®. Our know-how is continuously advanced, also in collaboration with our customers, and then introduced into serial pro-duction.
robots, 3D and circular movements
triflex®, triflex® R, easy triflex®, twisterchain®, twisterband
Closed design Easy to equip For 2 and 3 axes Modular design
www.igus.in/in/triflexR
Easy to equip
easychain® and zipper e-chains®
One-piece e-chains®
Quick to equip from inside or outside Extremely fast opening and closing Small and medium-sized e-chains® ande-tubes
www.igus.in/in/easychain
Allrounder, small and medium sizes
System E2 mini, E2 micro und E2/000 Standard e-chains®, small and medium sizes Inner heights: 5 to 45 mm Small divisions, smooth operation Versatile, modular interior separation, cable-friendly
www.igus.in/in/e2000
turn up to 7000°!
For the safe supply of energy in production lines and other production areas of the automotive in-dustry, igus® offers an ideal solution with plastic energy supply chains. Whether in manufacturing robots or indoor cranes with long travels, many applications are possible.
Also e-chains® can be directly used in the ve-hicle, e.g. in permanently powered sliding doors, seat adjusters, as conduits on the rear spoiler or in telescopic struts.If you need a cable guide or a kink protection – just ask us.
34 35
triflex® TRL: Light weight and cost effective
twisterchain®: circular- and rotational movements up to 540°
triflex® R: cable protection for 3D- and torsional-movements
System E4.1: Energy supply for long travels and 7th axis
CFROBOT: chainflex® cables for torsional-mo-vements and robot applications
triflex® RS: universal modules for robots
...robotics.dresspacks from stock...Cable carriers and e-chainsystems® for modern machines triflex® R options and variety of components
TRE – quick insertion of cables Simple filling with cables and hoses Especially for assembled cables TRC and TRE links can be combined Available in 7 sizes from 30 to 125 mm B and C version specifically for sophisticated applications
Type: Standard mounting bracket Quick and simple mounting with snap-on connection Extremely short downtimes for replacement of a filled triflex® R With or without tiewrap plates, or as intermediate
connectiones
triflex® R Quick exchange kit Changed within seconds without tools One-time-only alignment Perfect for triflex® R readychain®
Suits all additional axles: Ø 30 mm, Ø 32 mm, Ø 34 mm
triflex® RS system Integrated recuperating spring prevents loop formations and
give a directed pretension to the triflex® R Toolless mounting brackets for safe fastening Single module, space-saving and quickly mounted on robot
– for all common robots from stock
36 37
from stock www.igus.in/chainflex
...cables from stock.harnessed...readycable® und readychain®: Pre-harnessed cables in 24h and e-chainsystems® in 3-10 days
readycable®: Pre-harnessed cables from stock More than 1400 defined drive cables after the specifications of different manufacturers Professional manufactured 100% tested
Quickpin 2.0Connector-Cable-Configurator
www.igus.in/quickpin
readychain®: Assembly-optimized e-chainsystems®
From single piece Easing your capacities Minimized assembly time 100% tested Transport racks in your color and design Assembled and runs
from stock www.igus.in/readycable and www.igus.in/readychain
More than 950 types of cables available from stock
Certificates and approvals for chainflex® cables
control cables
data/koax cables
bus cables
fibre optic cables (FOC)
measuring system cables
servo cables
power cables
twistable cables
More than 950 chainflex® cables developed especially for the use in e-chainsystems®
Wear resistant TPE, PUR and oil-resistant PVC outer jackets Halogen-free and/or flame-retardant materials Different certificates: UL, CSA, CE, DESINA, CEI Smallest radii from 4 x d
38 39
...plastics for longer life...®
Where does iglidur® come from?It all started on 15 October 1964 in a double garage in Cologne Mülheim, Germany. During the first 20 years, we worked as a supplier of complex, technical plastic parts. Today, igus® is an important manufacturer of e-chainsystems® made of plastic and a specialist in polymer plain bearings .Between 1985 and today, igus® grew from 40 to over 1,800, working in 35 countries.
igus® quality assurance The quality policy of igus® GmbH is based on establishing the needs of our customers, mee-ting these needs, and always being a compe-tent partner and reliable supplier. igus® has al-ways undertaken to manufacture products with the very highest possible quality standard and, in addition, to constantly develop innovative solu-tions.
Open-plan offices without doors or walls
In-house tool design and construction
Mass production and job production for series both large and small
Development and Production
Great polymer plain bearing database
Automated material preparation and conveying
Optical tests on automatic systems - 100% control, up to 10 pieces per second
Extensive test database and value analysisiglidur® plain bearings mean the step from a plas-tic bushing to a tested and, thus, calculable ma-chine element. Over 5,500 tests per year have resulted in the probably world’s largest database relating to the tribological properties of polymer plain bearings. This database allows us to select the bearing with the best price-service life ratio for your specific application.
Modern, efficient injection molding High-tech solutions at a discount price. Our mo-dern injection molding systems allow cost-ef-fective, controlled-process manufacture of over 7,000 standard and numerous special parts, all just in time! Our production runs on 200 machi-nes with a locking pressure of up to 130 tons. Our “8 to 8 + Saturday to 12” service offers you the certainty of being able to respond quickly to changes in demand at short notice. Orders for standards parts which we receive by 7 p.m. can be dispatched on the same day!
40 41
Quick and reliable: igus® delivery service
...delivery service...igus.india...No warehousing at your site and yet all parts quickly availableNo minimum order value, no surcharges. More than 80,000 products from stock. Order from 1 piece without surcharges for small quantities. Invoices and acknowledgements available by post, fax or e-mail. 1,900 employees in Germany and 28 international subsidiaries and offices, plus bases in another 33 countries to guarantee a rapid delivery worldwide. Delivery and consultation daily from 7am till 8pm and Saturdays from 8am till 8pm Order tracking online possible No fuss return Round-the-clock emergency service
Our current delivery times
24-48 h 3-5 days 10 work days
All catalog items except for harnessing: 24 - 48 hIf available. New production in 2-3 days. Delivery time “today” on request (with a present avai-lability of 97% of all products!)
Harnessing orders and linear axes: 3-5 daysfor assembled cables (ready-cable®), simple chain systems (readychain® Basic) and linear axis products (drylin® SHT, SLW, ZLW etc.).
Elaborate harnessing orders: 10 working days10 working days* for elaborate harnessing orders (readychain® standard and premium)
®
plastics for longer life® – make your machines more durable with polymers
No lubrication, less maintenance, lower costs, lon-ger life cycles, ready availability ex stock – these key principles formulated by us apply to all igus®
products, systems and services. We are looking forward to your phone call or e-mail.
igus® (India) Pvt Ltd36/1, Sy No. 17/3, K R Puram HobliMahadevapura, Bangalore-560048Phone: +91-80-39 12 78 00Fax: +91-80-39 12 78 02E-mail: info@igus.in
Installation:We fit it, you relax
Bearings Specials:Machined or moulded
readychain®:one supplier = no problems
1 igus® Bangalore (central office)Mobile: 9341957166 (e-chains®) 9342401293 (Bearings)
2 igus® MumbaiPhone: 9324597101 (e-chains®) 9324061005 (Bearings)
3 igus® PunePhone: 9371201177 (e-chains®) 9325940099 (Bearings)
4 igus® DelhiPhone: 9310190110 (e-chains®) 9350922339 (Bearings)
5 igus® HyderabadPhone: 9347534422 (e-chains®) 9379514146 (Bearings)
6 igus® ChennaiPhone: 9380570451 (e-chains®) 9381518700 (Bearings)
7 igus® AhmedabadPhone: 9328220662 (e-chains®) 9375440499 (Bearings)
8 igus® KokataPhone: 9333508331 (e-chains®) 9379514146 (Bearings)
42 43
...igus specialists...igus® automotive specialists - in your country
®
igus® GermanyCologne (Headquarter)Industry Manager
Markus FethPhone: +49 (0) 22 03 / 96 49 - 251Fax: +49 (0) 22 03 / 96 98 - 251Mobile: +49 (0)1 72 / 2 52 89 80E-Mail: mfeth@igus.de
igus® GermanyCologne (Headquarter)Industry Manager
Dirk TietzPhone: +49 (0) 22 03 / 96 49 - 562Fax: +49 (0) 22 03 / 96 98 - 162Mobile: +49 (0)1 62-4 07 49 75E-Mail: dtietz@igus.de
igus® GermanyCologne (Headquarter)Technical Sales e-chainsystems®
Jörg OttersbachPhone: +49 (0) 22 03 / 96 49 - 111Fax: +49 (0) 22 03 / 96 49 - 222E-Mail: jotterbach@igus.de
igus® GermanyCologne (Headquarter)Technical Sales Bearings
Bernd SchusterPhone: +49 (0) 22 03 / 96 49 - 694Fax: +49 (0) 22 03 / 96 98 - 694E-Mail: bschuster@igus.de
igus® FranceFresnes (Paris)
Christophe GarnierPhone: +33-1-49 84 97 56Fax: +33-1-49 84 03 94E-mail: c.garnier@igus.fr
igus® SpainGuipuzcoa
Stephen Moreno SimpsonMóvil: +34-93-6 47 39 50Fax: +34-93-6 47 39 51E-mail: smoreno@igus.es
igus® UKNorthampton
David SpencePhone: +44-1604-67 72 40Fax +44-1604-67 72 45E-mail: dspence@igus.co.uk
igus® ItalyRobbiate (Milan)
Giulio FerrantePhone: +39-039-59 06-260Fax: +39-039-59 06 222E-mail: gferrante@igus.it
igus® AustriaAmpflwang
Christoph FöttingerPhone: +43-76 75-40 05-17Fax: +43-76 75-32 03E-mail: cfoettinger@igus.at
igus® North AmericaMichigan office, Kalamazoo, MI
Ken BlockPhone: +1-269-372-73 70Fax: +1-269-372-73 70E-mail: kblock@igus.com
igus® BrazilSanto Amaro
Márcio MarquesPhone: +55-11 35 31-44 57Fax +55-11 35 31-44 88E-mail: marcio@igus.com.br
igus® JapanTokyo
Takayuki MatsumotoPhone: +81-3-58 19-20 57Fax: +81-3-58 19-20 64E-mail: tmatsumoto@igus.co.jp
igus® Malaysia / SingaporeSingapore
Aw Kai HuaPhone: +65-64 87 14 11-838Fax: +65-64 87 15 11E-mail: kaihua@igus.com.sg
igus® KoreaIncheon City
Hyungtae KimPhone: +82-32-821 29 11Fax: +82-32-821 29 13E-mail: hkim@igus.co.kr
igus® ChinaShanghai
Eric XiePhone: +86-21-51 30 31 71Fax: +86-21-51 30 32 38E-mail: ericxie@igus.com.cn
igus® TaiwanTaiwan
Vincent ChiangPhone: +886-4-2358-1000Fax: +886-4-2358-1100E-mail: vchiang@igus.com.tw
igus® MexicoToluca
Francisco MarquezPhone: +52-1-72 22 64 39 23 Fax: +52-728284-3187E-mail: fmarquez@igus.com
igus® India
BangaloreDeepak PaulPhone: +91-80-39 12 78 12Fax: +91-80-39 12 78 02Mobile +91-98 80 77 11 05E-mail: deepak@igus.in
4660
18
1 355
10
62
38
57
30
7
9 61
39 1954
1637
49
4320
142953 21
444763
5926
1128
11 22 5635
2 431
4825
251
8
42
15 2350
32
4
4533
52
38
6
531
41
34
27
58
12 40 64
35
13
17
4660
18
1 355
10
62
38
57
30
7
9 61
39 1954
1637
49
4320
142953 21
444763
5926
1128
11 22 5635
2 431
4825
251
8
42
15 2350
32
4
4533
52
38
6
531
41
34
27
58
12 40 64
35
13
17
igus® offices
igus® distributors
1 Germanyigus® GmbHSpicher Str. 1a51147 Cologne (Porz-Lind)P.O.Box 90 61 2351127 ColognePhone +49-22 03-96 49-0Fax +49-22 03-96 49-2 22info@igus.de, www.igus.de
2 AustraliaTreotham Automation Pty. Ltd.Unit 36, 9 Powells Road,Brookvale NSW 2100Phone +61-2-99 07 17 88Fax +61-2-99 07 17 78info@treotham.com.au
3 Austriaigus® Polymer Innovationen GmbHOrt 554843 AmpflwangPhone +43-76 75-40 05-0Fax +43-76 75-32 03igus-austria@igus.at
4 ArgentiniaBorimport S.R.L.Guevara 275 (C1427BRE) – Capital FederalBuenos Aires - ArgentinaPhone +54-11-4556-1000Fax +54-11-4556-1000Mobil (011) 15-5261-7545igus@borimport.com
5 BelarusSTS Stromtehservis16-554, Ul. SharangovichaMinsk, 220018Phone +375 17 313 4513Fax +375 17 313 4514common@strom-ts.com
5 BelarusCOOO HennlichCharkovskaya Str. 90-8Minsk, 220015Phone +375 17 207-3926Fax +375 17 207-3921info@hennlich.by
6 Belgium/Luxembourgigus® B.V.B.A.Kolonel Begaultlaan 753012 WilselePhone +32-16-31 44 31Fax +32-16-31 44 39info@igus.be
7 Brasiliaigus® do Brasil Ltda.Av. Eng. Alberto de Zagottis 655Santo Amaro04675-085 São Paulo - SPPhone +55-11-35 31 44 87Fax +55-11-35 31 44 88vendas@igus.com.br
8 BulgariaAtlas Technik EOODBG-1612 SofiaPK 51Phone +359-885-23 25 95 +359-897-98 16 69Fax +359-2-859 76 81al_popoff@techno-link.com
8 BulgariaHennlich OOD, BG4000 PlovdivKonstantin Velichkov, 69, Et. 3Phone +359-32-511 326Fax +359-32-621 929office@hennlich.bg
9 Canadaigus® Office Canada201 Millway Ave.UNIT 25ConcordOntario L4K 5K8Phone +1-905-760 84 48Fax +1-905-760 86 88webmaster@igus.com
10 ChileVendortecSan Martín # 2097Maipú – SantiagoPhone +56-2-710 58 25ventas@vendortec.cl
11 Chinaigus® Shanghai Co., Ltd.No. 28, Jiatai Road,Waigaoqiao Free Trade ZoneShanghai 200131, P.R.C.Phone +86-21-51 30 31 00Fax +86-21-51 30 32 00master@igus.com.cn
11 China Southigus® China Guangzhou officeRoom 2306, West Tower,Yangcheng InternationalCommercial Center, Tiyu, East Road,Guangzhou 510620, P.R.C.Phone +86-20-38 87 17 26Fax +86-20-38 87 17 68guangzhou@igus.com.cn
12 ColumbiaColsein LtdaCalle 82 # 5–48BogotaPhone +57 61 08 448-121mercadeo@colsein.com.co
13 Costa RicaEnesa Equipos Neumati-cos S.A.Del Colegio Marista 100 este, 200 sur, 25 esteUrbanizacion CiruelasAlajuela, Costa RicaPhone +506-2440-2393Fax +506-2440-2393equiposneumaticos@enesa.net
14 CroatiaHennlich, Industrijska d. o. o.Franje Wölfla 410000 ZagrebPhone +385-1-3 87 43 34Fax +385-1-3 87 43 36hennlich@hennlich.hr
15 Czech RepublicHennlich Industrietechnik spol. s r.o., o.z. Lin-tech!eskolipská 941201 Litom"#icePhone Chains +420-416-71 13 32Phone Bearings +420-416-71 13 39Fax +420-416-71 19 99lin-tech@hennlich.cz
16 Denmarkigus® ApSPostboks 2438800 ViborgPhone +45-86-60 33 73Fax +45-86-60 32 73info@igus.dk
16 Denmark – e-chains®
Solar A/SIndustrievej Vest 436600 VejenPhone +45-76-96 12 00Fax +45-75-36 47 59solar@solar.dk
17 EcuadorEcuainsetecEl Zurriago E9-32 y el VengadorQuitoPhone +593-2-2253-757Fax +593-2-2461-833infouio@ecuainsetec.com.ec
18 EgyptFedicom Trading Fayed Sami & Co.12, El Mahaad El Swissri St.,Flat 10 – 2nd Floor-ZamalekCairo – A.R of EgyptPhone +202-2736 25 37Fax +202-2736 31 96mohamed.fayed@fedicom.com
18 EgyptIEE International Companyfor Electrical Engineering2nd floor, 25 Orabi StDown Town, CairoPhone +202-25 76 73 70Fax +202-25 76 73 75anas@iee-egypt.com
19 FinlandSKS Mekaniikka OyMartinkyläntie 5001720 VantaaPhone +358-20-764 65 22Fax +358-20-764 68 24mekaniikka@sks.fi
19 Finland – chainflex®
SKS Automaatio OyMartinkyläntie 5001720 VantaaPhone +358-20-764 6748Fax +358-20-764 6820automaatio@sks.fi
20 Franceigus® SARL49, avenue des PépinièresParc Médicis94260 FresnesPhone +33-1-49 84 04 04Fax +33-1-49 84 03 94info@igus.fr
21 Greece – e-chains®
Chrismotor s.a.71, Sp. Patsi str.118 55 AthensPhone +30-210-34 25 574Fax +30-210-34 25 595info@chrismotor.gr
21 Greece – BearingsJ. & E. Papadopoulos S.A.23, Retsina Street185 45 PiraeusPhone +30-210-4113133Fax +30-210-4116781sales@papadopoulos-sa.com
22 Hong KongSky Top Enterprises Ltd.Room 1707, Block C; Wah TatInd Centre; Wah Sing Street;Kwai Chung; Hong KongPhone +852-22 43 42 78Fax +852-22 43 42 79skytop@ctimail.com
23 Hungaryigus® Hungária Kft.Mogyoródi u.32.1149 BudapestPhone +36-1-306-64 86Fax +36-1-431-03 74info@igus.hu
23 HungaryTech-Con Kft.Vésõ utca 9-111133 BudapestPhone +36-1-412 41 61Fax +36-1-412 41 71tech-con@tech-con.hu
24 Indiaigus® (India) Pvt. Ltd.36/1, Sy No. 17/3Euro School Road,Dodda Nekkundi Industrial Area, - 2nd StageMahadevapura PostBangalore 560048Phone +91-80-39 12 78 00Fax +91-80-39 12 78 02info@igus.in
25 IndonesiaPt. Energi Canggih IndonesiaKelapa Gading SelatanBJ 08 / 14Gading SerpongTangerang 15810Phone +62-21-547 43 64Fax +62-21-547 43 65jakarta@energicanggih.com
26 IranTameen Ehtiajat Fani Tehran (TAF CO.)72, Iranshar Ave., Unit 515816 Tehran, IranPhone +98-21-8831 78 51Fax +98-21-8882 02 68info@taf-co.com
27 Irelandigus® IrelandFitzwilliam Business Centre26 Upper Pembroke StreetDublin 2Phone +353 1 6373921Fax +353 1 6620365sales@igus.ie
28 IsraelConlog LTDP.O. Box 35 71Petach Tikva 49134Phone +972-3-926 95 95Fax +972-3-923 33 67conlog@conlog.co.il
29 Italyigus® S.r.l.Via delle Rovedine, 423899 Robbiate (LC)Phone +39-039 5906.1Fax +39-039 5906.222igusitalia@igus.it
30 Japanigus® k.k.Arcacentral 7F, 1-2-1 Kinshi,Sumida-ku Tokyo JAPANZip 130-0013Phone +81 3 58 19 20 30Fax +81 3 58 19 20 55info@igus.co.jp
31 LatviaINPAPKatrinas Str. 16Phone +371-750 94 04Fax +371-750 94 03office@inpap.lv
32 LebanonMecanix ShopsGebran SafiCharles Helou AvenueBeirutPhone +961 1 486 701Fax +961 1 490 929mecanix@dm.net.lb
33 LithuaniaHitech UABTerminalo g. 354469 Biruliskiu k.Kauno raj.Phone +370 37 323271Fax +370 37 203273info@hitech.lt
34 Malaysiaigus® Malaysia Sdn BhdNo. 19-1, Jalan PJU 1/3FSunway Mas Commercial Centre47301 Petaling JayaSelangor D.E.Phone +603-7880 5475Fax +603-7880 5479awong@igus.de
34 MalaysiaAutomation Industry & Systems(M) SDN.BHD.50, Lorong Nagasari 11, Taman Nagasari13600 Prai, PenangPhone +60-4-390 56 07Fax +60-4-399 73 27autoind@po.jaring.my
35 MoroccoAFIT5, Rue Amir Abdelkader20300 CasablancaPhone +212 522 63 37 69Fax +212 522 61 83 51fmarquez@igus.com
36 Mexicoigus® México S. de R.L. de C.V.Boulevard Aeropuerto 160 Int. 135Col. Corredor Industrial Toluca-Lerma Toluca, C.P. 52004Phone +52-728-284-31 85Fax +52-728-284-31 87fmarquez@igus.com
37 Netherlandsigus® NederlandSterrenbergweg 93769 BS SoesterbergPhone +31-346-35 39 32Fax +31-346-35 38 49igus.nl@igus.de
37 Netherlands – BearingsElcee Holland BVKamerlingh Onnesweg 28NL-3316 GL DordrechtPhone +31-78-6544777Fax +31-78-6544733info@elcee.nl
igus® worldwide
38 New ZealandAutomation Equipment Ltd.26 Tawn PlacePO Box 5656HamiltonPhone +64-7-849 02 81Fax +64-7-849 24 22sales@autoequip.co.nz
39 Norway/IcelandASI Automatikk ASIngv. Ludvigsensgate 233007 DrammenPhone +47-32-82 92 90Fax +47-32-82 92 98info@asiautomatikk.no
40 PanamaAutomatizaciones Indust-riales, S.A.Via principal a 300 Mts delCentro Comercial Los PueblosPhone +507-399-7728/29Fax +507-393-1155mschossow@automati-zacionesindustriales.com
41 PeruProfaco S.A.C.Calle San Lorenzo 300SurquilloLima 34 – PerúPhone +51-1-241 43 70 +51-1-242 52 95Fax +51-1-242 86 08ventas@profaco.com
42 Polandigus® Sp zo.oul. Parowcówa 10 b02-445 WarszawaPhone +48-22-863 57 70Fax +48-22-863 61 69info@igus.pl
43 Portugaligus® Lda.R. Eng. Ezequiel Campos, 2394100-231 PortoPhone +351-22-610 90 00Fax +351-22-832 83 21info@igus.pt
44 RomaniaTechCon Industry SRLCalea Crangasi nr. 60060346 BucurestiPhone +40-21-2219-640Fax +40-21-2219-766automatizari@meteor.ro
44 RomaniaHennlich SRLStr. Patria, Nr17310106 AradPhone +40-257-21 11 19Fax +40-257-21 10 21igus@hennlich.ro
45 RussiaEka-Service Kompani1-aja Dubrowskaja, 2A, k. 35109044 MoskauPhone +7-495-632 66 23Fax +7-495-677 17 78info@ekaservice.ru
45 RussiaBarti OOOp/b 333194358 St. PetersburgPhone +7-812-972 49 14Fax +7-812-448 38 28barti@barti.ru
45 RussiaOOO HennlichVagzhanosvkiy pereulok 9,office 404170100 TverPhone +7-4822 49 37 82Fax +7-4822 49 37 82hennlich@hennlich.ru
46 Saudi ArabiaAFIKhalaf Bin Hesham StreetBox 999831423 DammamPhone +966 3 87 400 33Fax +966 3 84 700 77marketing@afi.com.sa
47 SerbiaHennlich doo BeogradUl. S. Markovica 3/411400 MladenovacPhone +381-11 39 43 414Fax +381-11 39 43 412office@hennlich.rs
48 Singapore – HQ ASEANigus® Singapore Pte Ltd.15 Shaw Road, #03-02Singapore 367953Phone +65-64 87 14 11Fax +65-64 87 15 11Malaysia-Hotline +60-12-709 30 41Thailand-Hotline +66-9-160 73 69asia-sales@igus.de
49 SlovakiaHennlich Industrietechnik s.r.o.Mileti$ova 16SK-821 08 BratislavaPhone +421-2-50 20 25 04Fax +421-2-50 20 25 20technik@hennlich.sk
50 SloveniaHennlich, d. o. o.Industrijska tehnikaPodnart 33SI-4244 PodnartPhone +386-4-532 06 10Fax +386-4-532 06 20info@hennlich.si
51 South Africaigus® Pty. Ltd.Unit 14, Heron Park80 Corobrik RoadPO Box 42144017 Riverhorse ValleyPhone +27-31-569 6633Fax +27-31-569 6636sales.sa@igus.de
52 South Koreaigus® Korea Co. Ltd.25BL 13LT Namdong Ind. Complex446-11 Nonhyundong, NamdongguIncheon City, 405-300Phone +82-32-821 29 11Fax +82-32-821 29 13sales-korea@igus.de
53 Spainigus® S.L.C/ Llobatona, 6Polígono Noi del Sucre08840 Viladecans – Bar-celonaPhone +34-936-473 950Fax +34-936-473 951igus.es@igus.es
54 Swedenigus® abKnut Påls väg 8256 69 HelsingborgPhone +46-42-32 92 70Fax +46-42-21 15 85info@igusab.se
54 Sweden – e-chains®
OEM Automatic ABBox 1011 Dalagatan 4573 28 TranåsPhone +46-75-2424100Fax +46-75-2424159info@aut.oem.se
54 Sweden – BearingsColly Components ABP.O. Box 76164 94 KistaPhone +46-8-7030100Fax +46-8-7039841info@me.colly.se
55 Switzerlandigus® Schweiz GmbHIndustriestr. 114623 NeuendorfPhone +41-62-38 89 797Fax +41-62-38 89 799info@igus.ch
56 Taiwanigus® Taiwan Company Ltd.5F, No. 35, 24th RoadTaichung Industrial ParkTaichung 40850 Phone +886-4-23 58-1000Fax +886-4-23 58-1100igus-taiwan@igus.com.tw
57 ThailandAutoflexible Engineering Co., Ltd.111 Soi. Sukhumvit, 62/1Bangjak, PhakanongBangkok 10260Phone +66-2-311 21 11Fax +66-2-332 79 00kwanchai@autoflexible.com
58 TunesiaBOUDRANT53, Avenue de Carthage1000 Tunis – TunisiaPhone +216 71 34 02 44Fax +216 71 34 89 10info@boudrant.com.tn
59 TurkeyHIDREL Hidrolik ElemanlarSanayi ve Ticaret A.S.Percemli Sk. No. 7Tünel Mevkii80000 Karaköy / IstanbulPhone +90-212-249 48 81Fax +90-212-292 08 50info@hidrel.com.tr
60 United Arab EmiratesUnigroup (FZE)1st floor Rasana Building M602 Sharjah Airport Free zone SharjahPhone +971 6 55 78 386Fax +971 6 55 78 387automation@unigroup.ae
60 United Arab EmiratesPower & Technology Trd. Co.P.O. Box 33372SharjahPhone +971 6 54 21 300Fax +971 6 54 23 700sales@powertech.ae
61 United Kingdomigus® UK Ltd.51A Caswell RoadBrackmillsNorthampton NN4 7PWPhone +44-1604-67 72 40Fax Chain +44-01604 67 72 42Fax Bearing +44-01604 67 72 45sales@igus.co.uk
62 UkraineCominpro Ltd.Romena Rollana 12, Office 22061058 KharkovPhone +38-057 717 49 14Fax +38-057 717 49 14cominpro@gmail.com
62 UkraineHennlich Ukraine LLC (HQ)Kramatorska Street 1584100 Slovyansk City, Donetsky RegionPhone +38-06262-335 40hennlich@hennlich.com.ua
63 USAigus® inc.50 N. BroadwayP.O. Box 14349East Providence, RI 02914Phone +1-401-438 22 00Fax +1-401-438 72 70webmaster@igus.com
64 VenezuelaNeumatica Rotonda C.A.Prolong Av. MichelenaC.C. Atlas Locales B-10 y B-11Valencia, Edo. CaraboboPhone +58-241-832.64.64 +58-241-832.32.50 +58-241-838.88.19Fax +58-241-832.62.83ventas@neumaticar.com
Issue August 8th 201144 45
46 47
iglidur® | Analysis igubal® | Analysis
Date: Phone: +91-80-39 12 78 00Fax: +91-80-39 12 78 02
From: To:igus® (India) Pvt Ltd.36/1, Sy No. 17/3, K R Puram HobliMahadevapura, Bangalore-560048
Phone:Fax:
Dimensions: What type of bearing are you currently using?
Shaft diameter (mm): ....................................................... iglidur®
Bearing length (mm): ....................................................... steel backed PTFE bearing
Bearing wall thickness (mm): ........................................... oil filled sintered bronze bearing
Bearing load (N): .............................................................. anti-friction bearing
Running speed (m/s): ...................................................... other
Type of motion: Which problem can iglidur® solve for you?
rotating with ...................................................... U/min dry running chemicals
oscillating with ................................................ degrees abrasion firmness temperatures
linear with ...................................................mm stroke edge pressing dirt, dust, ...
Rate (1/min): .................................................................... vibration dampening cost reduction
Other load characteristics: ...............................................
Lubrication: .........................................................................................
dry Drawing:
oil
grease
water
Ambient temperature (°C) ................................................
Surrounding media (e.g. acids, water, alkalines etc.): ................................................................................................
Sliding surface (e. g. steel, plastic): ...........................................................................................................................
Average roughness Ra: ...................................................
Housing material: .............................................................
Intermittent rating: ...........................................................
Run time (s): ....................................................................
Down time (s): .................................................................
Target service life: ............................................................
Please enter as much information as possible. If you prefer other measuring units, cross out the given unit and write your units next to it. Most applications questions can be answered with minimal data. Please call for further information (Phone: +91-80-39 12 78 005).
Date: Phone: +91-80-39 12 78 005Fax: +91-80-39 12 78 02
From: To:igus® (India) Pvt Ltd.36/1, Sy No. 17/3, K R Puram HobliMahadevapura, Bangalore-560048
Phone:Fax:
Please enter as much information as possible. If you prefer other measuring units, cross out the given unit and write your units next to it. Most applications questions can be answered with minimal data. Please call for further information (Phone: +91-80-39 12 78 005).
Rod ends type A (male thread) Average roughness Ra: ...................................................
Rod ends type B (female thread) Target service life (hrs): .....................................................
Pillow block Current typ: .....................................................................
Spherical bearing .........................................................................................
Flange bearing 2-hole Surrounding media (e.g. acids, water, alkalines): ..............
4-hole .........................................................................................
Clevis Joints with pin and clip
with spring-loaded pin Which problem can igubal® solve for you?
Dimensional series E dry running chemicals
K corrosion dirt
Thread pitch Standard thread vibration dampening dust
Fine thread cost-reduction weight
Speed (m/s; rpm): ............................................................ Other load characteristics: ...............................................
.........................................................................................
Type of movements: Drawing:
rotating
oscillating with ................................................ degrees
linear
Lubrication:
dry
oil
grease
water
Shaft diameter (mm/Inch): ...............................................
.........................................................................................
Bearing load (N): ..............................................................
Ambient temperature (°C): ...............................................
Shaft material (z. B. steel, 303 stainless, plastic): ..............
.........................................................................................
.in/24 Online shopping –24h! More brochures and catalogs online.
igus® (India) Pvt. Ltd.36/1, Sy No. 17/3, NCPR Layout, Euro School Road,
Dodda Nekkundi Indl Area, 2nd Stage,Mahadevapura Post,
Bangalore- 560048Tel.: +91-80-39127800/ +91-80-39127801
Fax: +91-80-39127802E-Mail: info@igus.in
MAT0070819.13 Issue 09/2011
Configured in minutes......delivered in hours......made for years!
www.igus.eu/e-chains
www.igus.eu/24h
www.igus.eu/lifetime
.in...
.in/automotive