Post on 20-Jan-2016
transcript
iMeasureIn-Building Survey
Solution
UsersRF engineersSales engineersSite acquisition teamSite development teamTechniciansSurveyorsNon-technical staff
OperationSimple operation
1. Select the Operation Mode2. Legend Customization3. Define your Settings4. Load building layout picture5. Start recording6. Tap the screen to identify your location
as you are walking through the building
7. Add notes and snap pictures while you are recording
8. Export recorded session
Discovering iMeasure
iMeasure is a pocket-size Android based solution for
comprehensive measurements of the wireless air
interface. With this light size
and intelligent Solution;
You will have Friendly tool for
onsite troubleshooting and
site surveys.
Select the Operation Mode
Floor Plan Interface
Info Interface
Graph Screen
Settings
Legend Customization
Test Scenario Setup
Log File Settings
BT Synchronization
Load building layout picture
Start Recording & Tap the screen
Add notes and snap pictures
Save your test & have the presentation on site
Output PlotsSave Multiple Plots in same time
What files you will have?
What is recorded? Date & Time Image Name Marker Number Coordinates Sim Opearator Name Phone Type Network Type Cell ID Location Area Code GSM Rssi GSM Bit Error Rate Cdma Eo & Ec/Io Evdo Eo & Ec/Io Evdo S/N UMTS Signal Strength
What is recorded? (Continue)
Outdoor Output Plot
BT Feature
BT Feature (Continue)
Output SummaryColor-coded
Signal strength overlaid on the building floor plan or picture
For more information please contact us at support@atecwireless.com
or call us at (678) 871-2129or email me at abdelbasseir@atecwireless.com