Post on 25-Aug-2020
transcript
industrial & commercial sectional doors
P7 Industrial™
Toughpanel™
Enviropanel™
June 2016SECTION 08/1RETURN TO INDEX
Product Code
P7
descriptionThe B&D P7™ Industrial door features an aluminium powder coated door frame which has a high strength to weight ratio. Customer has the flexibility to select from a range of different insert options, to design a door that suits the look of their industrial/commercial application.
The sectional garage door is made up of a number of rigid sections that are hinged together and move vertically in the opening, then horizontally along the ceiling, guided by tracks and counterbalanced with springs.
profile
size rangeAvailable in sizes from 1370mm to 4500mm height and 1800mm to 7620mm in width (slat profile 5900mm max).
Inserts measure up to 575mm high, and up to 1428mm wide. The insert size cannot be changed. Width is limited to 1200mm with some inserts, check with your B&D representative for further details.
Your P7 Industrial door will suit your garage opening with equal sized panels and evenly spaced inserts.
features• Framesavailableinnaturalaluminiumfinishor
choose from over 100 Dulux standard powder coat colours.
• Choosefromarangeofinsertoptionsorcombinedifferent inserts to suit your requirements.
• Galvanisedhingesandhangersareused,providing the door with:
- Additional strength. - Durability. - Resistance to corrosion.
• Thealuminiumframeisconstructedfrom1.5mmthick, box shaped extrusion with tongue and groove top and bottom edges for weather protection.Forwidedoorsadditionwebextrusions are included for additional strength.
• Insertsfittedusingsnap-onextrusionsandglazingseals.
• Eachdooristailormadetosuitthesizerequired.
• Wheelshaveballbearingsforsmoother,moredurable operation.
• SpringsdesignedtocomplywithrequirementsofAustralianStandards-20,000cycles.
• Reinforcingforwidedoors-allpanelsreinforcedfor door widths of 3800mm and over.
• Canbemanuallyorelectricallydrivenwitheither domestic Controll-A-Door or industrial commercial Axess opener.
PANEL PROFILE
INSERT PROFILE Varies for each insert
MODEL P7 Industrial sectional
MODEL CODE P7
EXTRUSION THICKNESS 1.5mm
MAX DOOR HEIGHT 4500mm
MAX DOOR WIDTH 7620mm (slat profile 5900mm max)
TAPER OPTION Hinged and fixed option
industrial sectional overhead door
June 2016SECTION 08/2RETURN TO INDEX
Product Code
P7
P7 Industrial™ door assorted panel insertscolours/finishesFrameavailableinaluminiumfinishorinover100powder coating colour options from the standard Dulux range.
INSERTS AvAILABLE IN
1. Alumpanel™ inserts - aluminium stucco available in natural aluminium or powder coated in a choice of over 100 colours.
2. Alumpanel™ with air inserts - in natural aluminium or powder coated in a choice of over 100 colours. Perforation Material: 1 mm thick aluminium grade 5005-H34. Perforations: 3.25mm diameter @ 6.1mm staggered pitch. Open Area: 25.74%.size 3.18mm round holes.
3. Aluminium plate inserts - in natural aluminium finish or powder coated in a choice of over 100 colours, in: a. Checker plate pattern
4. Acrylic panel inserts - 4.5mm acrylic inserts available in clear, smoke or opaque finish.
5. Mini corrugated steel inserts - powder coated in a choice of over 100 colours.
6. Vertipanel™ inserts - available in aluminium or powder coated in a choice of over 100 colours.
7. Airpanel™ inserts - attractive Amplimesh 68A grill design offering 80% airflow. Available in aluminium or powder coated in a choice of over 100 colours.
8. Aluminium slatted - Powdercoated or Knotwood™ Timber Look - 50mm x 10mm with a large range of colours. Maximum width for slat profile is 5900mm - up to approx. 40% airflow can be achieved by adjusting the slat spacing. Acrylic or Colorbond steel can be added to slatted doors for additional weather protection (door size restrictions apply).
9. Flatsteelinsertsinachoiceofsmoothorwood look embossed. Available in a range of Colorbond colours including Timbagrain.
10. Ribbed steel inserts in a choice of smooth or wood look embossed. Available in a range of Colorbond colours including Timbagrain.
11. Omnipanel™ inserts - allows you to combine different inserts to suit your design requirements. This great versatility means the P7 door can be used in an extensive range of applications.
options• Tapers-forgaragefloorsthatslopeacrossthe
opening.
1. Alumpanel™ 2. Alumpanel™ with Air
10. Ribbed steel
4. Acrylic
7. Airpanel™
6. Vertipanel™
9.Flatsteel
3. Aluminium checker plate
5. Mini corrugated steel
8. Aluminium slatted
industrial sectional overhead door
June 2016SECTION 08/3RETURN TO INDEX
NOTES / INFORMATIONA) Forareaswithinonekilometreofacorrosiveenvironmenteg.saltairor
industrial fallout, special care and maintenance are generally required for metal products. Consult B&D Doors or your B&D Dealer for advice.
B) P7 Industrial doors are covered by a one year warranty for all components and labour conditional on care and servicing as recommendedinthedoor’shandbook.Fulldetailsofthewarrantyareavailable, on request, from your nearest B&D office.
C) The company reserves the right to make changes or improvements to the products or accessories without notice and without incurring any obligation to make similar changes or improvements to goods previously ordered.
D) Prefixed Trademarks are trademarks of B&D Australia Pty. Ltd. Abuse of these trademarks may result in legal action.
E) B&Dproductshavemanypatentsandregistereddesignsapplicable.F) WhileBlueScopeSteelisourpreferredsupplier,steelproductsfromother
sources may also be used.G)Detailscorrectatdateofpublication.Specificationssubjecttochange
without notice.
installation requirements
*METHOD OF OPERATION
An allowance of 50mm has been allowed for a domesticoverheadopener.Shouldanindustrialoverhead opener be required then an additional 60mm will be required. We recommend you contact B&D or one of our distributors before proceeding further.
Product Code
P7
industrial sectional overhead door
INSTALLATION CLEARANCES - standard headroom
Headroom (mm) Sideroom (mm)
Recommended With Opener* Recommended each side
From (incl.) Height
To (incl.) Height
Up to 4710W
4710 to 5285W
Over 5285W
Up to 4710W
4710 to 5285W
Over 5285W
1370 2440 340 340 390 390 390 440 120
2445 3050 340 340 390 390 390 440 120
3055 3660 340 390 390 390 440 440 120
3665 4500 390 390 390 440 440 440 120
INSTALLATION CLEARANCES - low headroom
Headroom (mm) Sideroom (mm)
Recommended With Opener* Recommended each side
From (incl.) Height
To (incl.) Height
Up to 4710W
4710 to 5285W
Over 5285W
Up to 4710W
4710 to 5285W
Over 5285W
Up to 15m2
Over 15m2
1370 2440 190 190 190 240 240 240 155 195
2445 3050 190 190 200 240 240 250 155 195
3055 3660 190 200 200 240 250 250 155 195
3665 4500 200 200 200 250 250 250 155 195
June 2016SECTION 08/4RETURN TO INDEX
Product Code
P7
notes
industrial sectional overhead door
June 2016SECTION 08/5RETURN TO INDEX
industrial sectional overhead door
Product Code
PTG2
descriptionThe B&D Toughpanel™ is a steel sectional overhead door. It has five wide ribs across each panel, giving a shiplap board effect in either a smooth or woodgrain finish. It is suitable for heavy duty industrial and commercial applications, such as emergency services buildings, due to its strength and the ability to incorporate windows and insulation in individual panels.
The sectional door is made up of a number of rigid sections that are hinged together and move vertically in the opening, then horizontally along the ceiling, guided by tracks and counterbalanced with springs.
profile
size rangeAvailable in sizes from 1370mm to 4500mm height and 2000mm to 5500mm in width.
4.5mm acrylic window inserts are available in two sizes, 300mm x 730mm and 85mm x 380mm.
Expandedaluminiummeshwindowsarealsoavailable and can be added to individual panels. These windows measure 300mm x 730mm.
The panel configuration for the Toughpanel is as follows:
PANEL PROFILE
PATTERN OR RIB TYPE
MODEL Toughpanel
MODEL CODE PTG2
COIL THICKNESS 0.6mm
COIL TYPE G2NS
WOODGRAIN OPTION Yes
SMOOTH OPTION Yes
MAX DOOR HEIGHT 4500mm
MAX DOOR WIDTH 5500mm
TAPER OPTION Hinged & fixed option
HIGH WIND OPTION Yes
Tongue & Groove Profile
WIDTH RANGE
2000 to 2995
3000 to 3995
4000 to 4995
5000 to 5500
No. of centre stiles 2 3 4 5
No. of windows 3 4 5 6
features• Galvanisedhingesandhangersareused,
providing the door with:- Additional strength.- Durability.- Resistance to corrosion.
• Panelsmanufacturedfrom0.6mmrollformedsteel.
• Tailormade-eachdooristailormadetoorder.(They are not made up from a mix of standard size panels).
• Wheelshaveballbearingsforsmoother,moredurable operation.
• SpringsdesignedtocomplywithrequirementsofAustralianStandards-20,000cycles.
• Reinforcingforwidedoors:- Doors up to and including 3545mm - bottom
panel only. - Doors greater than 3545mm and up to 4705mm
- bottom and top panel only.- Doors greater than 4705mm - all panels.- Doors higher than 3985mm and wider than
5100mm will be supplied with double end stiles.
• Rollededges(insteadofrawsteeledges)onstiles, horizontal panel edges and reinforcing - eliminates possibility of cutting fingers on these edges.
June 2016SECTION 08/6RETURN TO INDEX
Product Code
PTG2
colours/finishesAvAILABLE IN
• ExtensiverangeofColoRBoND® colours (see colour chart for details).
• Woodgrainembossedfinishisthestandardfinish,however, a smooth finish is also available.
options• Tapers-Availableinhingedandfixed
configurations for floors that slope across the opening.
• Windows-Forvisionoutsideoftheopening.
• Expandedaluminiummeshwindows-Allowsvision and ventilation.
• Highcyclespringing-Forfrequentlyusedapplications such as car parks and loading bay doors.
installation requirements
NOTES / INFORMATIONA) Forareaswithinonekilometreofacorrosiveenvironmenteg.saltairor
industrial fallout, special care and maintenance are generally required for metal products. Consult B&D Doors or your B&D Dealer for advice.
B) Toughpanel Industrial doors are covered by a one year warranty for all components and labour conditional on care and servicing as recommendedinthedoor’shandbook.Fulldetailsofthewarrantyareavailable, on request, from your nearest B&D office.
C) The company reserves the right to make changes or improvements to the products or accessories without notice and without incurring any obligation to make similar changes or improvements to goods previously ordered.
D) Prefixed Trademarks are trademarks of B&D Australia Pty. Ltd. Abuse of these trademarks may result in legal action.
E) ColoRBoND®isaregisteredtrademarkofBlueScopeSteellimited.F) B&Dproductshavemanypatentsandregistereddesignsapplicable.G) WhileBlueScopeSteelisourpreferredsupplier,steelproductsfromother
sources may also be used.H) The process of roll forming sheet steel may cause irregularities in flat
panel surfaces. Woodgrain texture improves the doors aesthetics. Smoothfinishnotavailableforallsizes.
I) Detailscorrectatdateofpublication.Specificationssubjecttochangewithout notice.
industrial sectional overhead door
INSTALLATION CLEARANCES - standard headroom
Headroom (mm) Sideroom (mm)
Recommended With Industrial Opener Recommended each side
From (incl.) Height
To (incl.) Height 3500 4500 5500 3500 4500 5500
1370 2500 365 365 365 465 465 465 100
2505 4000 365 365 390 465 465 490 100
4005 4500 390 390 390 490 490 490 100
INSTALLATION CLEARANCES - low headroom
Headroom (mm) Sideroom (mm)
Recommended With Industrial Opener Recommended each side
From (incl.) Height
To (incl.) Height 3500 4500 5500 3500 4500 5500 Up to
15m2Over 15m2
1370 2765 190 190 190 290 290 290 155 195
2700 4500 200 200 200 300 300 300 155 195
June 2016SECTION 08/7RETURN TO INDEX
PANEL PROFILE
FLAT
RIBBED
PATTERN TYPE
MODEL Enviropanel
MODEL CODE ETG1
DOUBLE SKIN Yes
EPS INSULATION CORE Yes
THERMAL BREAKS Yes
AIR MIGRATION SEALS Yes
R vALUE 1.83 Km2/W
EMBOSSED Yes
SMOOTH OPTION No
MAX DOOR HEIGHT 4577mm
MAX DOOR WIDTH 5864mm
TAPER OPTION No
HIGH WIND OPTION No
Product Code
ETG1
descriptionEnviropanel™ is a total insulated door system that doesn’t cut corners. Each insulated panel is produced using two layers of high quality steel and a solid EPS core, with an energy efficient thermal break that effectively separates the inner and outer skins of the panel.
This break reduces thermal transmission, improving overall insulation performance and effectiveness. In addition to insulation the panels provide noise reduction qualities.
profile
RIBBEDFLAT
features• Thepanelsaremadeupoftwoseparatesteel
skinslaminatedagainst47mmthickExpandedPolystyrene sheet core.
• 3separatesealsthatcombatairmigration.
- Thermal barrier is a compression joint which acts as a seal running the full width of the door and seals of inherent gaps between each panel
- JambEdgeSealSystemtosealanygapstheremay be between the door and the opening
- A deep cushioning ‘U’ shape flexible vinyl extrusion attached to the bottom panel to seal the gaps
• Purposedesignedthermalbreakthatdoesnothave metal-to-metal contact from one side of the door to the other.
• TheEnviropanelismadefromqualityExpandedPolystrene(EPS)resultinginminimal‘thermaldrift’- this means the product will retain its insulation properties longer than other comparable materials.
• Tongueandgrooveedgepanelprofile.
• Panelreinforcingonalldoorswiderthan3555mm.
• Heavydutygalvanizedhinges.
•Wheelshaveballbearingsforsmoother,moredurable operation.
•SpringsdesignedtocomplywithrequirementsofAustralianStandards-20,000cycles.
• largedoorshavesolidtorsionshafts.
•Twostandardpanelstylesribbedandflat,bothinan embossed finish. NOTE: Rib spacing may differ to that shown due to door size.
•WetpaintedtotheB&DColorbondrange.
• Wetpaint-basecolourisbrightwhite.
Flat Ribbed
Insulatedsteel sectional door
June 2016SECTION 08/8RETURN TO INDEX
colours/finishesEnviropaneldoorsareavailableinthestandardB&D colour range, however, lighter colours are recommended to improve overall insulation performance.
Jamb seals are available in a choice of 4 colours.
Regardless of the external colour the internal colour willremainbrightwhite.SeethelatestB&Dcolourchart for all colour choices.
EPS information• ExpandedPolystyrene(EPS)ismadefrom
expanded beads that are similar to those found in a ‘bean bag’ and contain approximately 98% air. The beads are injected into a moulding machine that applies steam and pressure, which fuses the beads together.
• EPSdoesnotutiliseChlorofluorocarbon(CFC)orHydroChlorofluorocarbon(HCFC)orFormaldehydeinitsmanufacturingprocesssothere is no potential for out gassing or the release of harmful toxic chemicals trapped within the material over the life of the door.
• EPSisinert,stableanddoesnotproducemethane gas or contaminating leachates.
• EPSisodourless,non-toxicandcaneasilyberecycled.
• EPSisa‘closedcell’typeinsulationwhichprovides better thermal retention and less moisture absorption which, if left unchecked, can cause rust and opener wear by altering the operational characteristics of your door.
• Garagedoorsaremovingobjectsthereforeinherent stresses can occur during opening and closing cycles, along with harmful UV rays can severely reduce the performance of an insulated material.EPShoweverisastablematerialandhas a very long lifespan because it does not degrade like other forms of insulation can.
size rangeAvailable in sizes from 1841mm to 4577mm in height and from 1750mm to 5864mm in width.
Three standard panel heights - 454mm & 530mm & 608.
All door heights shown in the table on the left are available as flat embossed panels.
The ribbed profile is only available as indicated in theREDonthetable.
All heights available as flat panel doors - heights in red are available as ribbed panel doors.
Product Code
ETG1
Insulatedsteel sectional door
DOOR HEIGHTSincl. 25mm w/strip
PANEL HEIGHTS (mm) NO. OF PANELS454 530 608
1841 4 0 0 41849 0 0 3 31917 3 1 0 41993 2 2 0 42069 1 3 0 42145 0 4 0 42223 0 3 1 42295 5 0 0 52301 0 2 2 42371 4 1 0 52379 0 1 3 42447 3 2 0 52457 0 0 4 42523 2 3 0 52599 1 4 0 52675 0 5 0 52749 6 0 0 62753 0 4 1 52757 2 0 3 52825 5 1 0 62831 0 3 2 52903 5 0 1 62911 1 0 4 52977 3 3 0 62987 0 1 4 53053 2 4 0 63065 0 0 5 53129 1 5 0 63203 7 0 0 73205 0 6 0 63211 3 0 3 63283 0 5 1 63355 5 2 0 73361 0 4 2 63431 4 3 0 73439 0 3 3 63507 3 4 0 73511 5 0 2 73519 1 0 5 63583 2 5 0 73595 0 1 5 63659 1 6 0 73673 0 0 6 63735 0 7 0 73811 7 0 1 83819 3 0 4 73885 5 3 0 83891 0 5 2 73961 4 4 0 83969 0 4 3 74037 3 5 0 84047 0 3 4 74119 5 0 3 84127 1 0 6 74189 1 7 0 84203 0 1 6 74265 0 8 0 84273 4 0 4 84281 0 0 7 74343 0 7 1 84421 0 6 2 84499 0 5 3 84577 0 4 4 8
June 2016SECTION 08/9RETURN TO INDEX
Product Code
ETG1
NOTES / INFORMATIONA) Enviropaneldoors,inresidentialapplications,arecoveredbya12month
warranty, conditional on proper care, as recommended in the door’s handbook.Fulldetailsofthewarrantyareavailablefromwww.bnd.com.au. 12 month warranty only applies to doors purchased and installed in AustraliaorNewZealand.Warrantyonlyvalidifwarrantyconditionsaremet.
B) Forareaswithinonekilometreofacorrosiveenvironmenteg.saltairorindustrial fallout, special care and maintenance are generally required for metal products. Consult B&D or your B&D Accredited Dealer for advice.
C) The company reserves the right to make changes or improvements to the products or accessories without notice and without incurring any obligation to make similar changes or improvements to goods previously ordered. Specificationssubjecttochangewithoutnotice.
D) Prefixed Trademarks are trademarks of B&D Australia Pty Ltd.
E) Detailscorrectatdateofpublication.
RECOMMENDED BACKROOM CLEARANCE REqUIREMENTSRear Torsion - 680mm plus door height.StandardHeadroom-540mmplusdoorheight.StandardHeadroomwithopener-1000mmplusdoor height.
NOTE: Sideroomdimensionsincludedooroverlap,ofopening, of 30mm on each side. All measurements are in millimetres and are minimum unless otherwise shown.Standardpanelheightsmayreduceheadroom clearances. Assess each installation carefully before ordering.
thermal break• Anindependentlaboratoryperformeda
comparisontestontheEnviropanelandacompetitor’s insulated door.
• Thecompetitor’sdooristypicaloftheindustrystandard for insulated garage door construction.
• Bothdoorswere50mmthick,usedidenticalEPSinsulation cores and identical steel skins front andback,howevertheEnviropanelfeaturesaspecially designed thermal break.
• Aftertwohoursofdirectexposureto57°C,temperatures were measured for thermal transmission from the front to the back of the
door.TheEnviropanelmeasured34.6°Cascomparedto42.8°Conthecompetitor’sdoor.
• Thisisasubstantial15.5%differenceatthemostcritical area of the door, the section joints.
• Theinteriorsurfacecomparativetemperaturesofthe centre of the door panels were also sizeable, measuring 7.2% lower than the competitor’s.
• ThereasonfortheselargedifferencesisthattheEnviropanelThermalBreakdoesnothavemetal-to-metal contact from one side of the door to the other, like that of the competitor’s door.
• Thisreducesthethermaltransmissionofthedoor,which improves its overall insulation value and effectiveness.
installation requirements
Standardheadroomdoorsshowndonotallowfordoorshigherthan2749mmhighand4800mmwidethatmayrequire50mmmoreheadroomdue to larger diameter cable drums. An additional 70mm headroom will be required if an industrial/commercial opener is to be used.
actual hanging weight (kg)
DOOR HEIGHT DOOR WIDTH - UP TO (mm)
PANELS mm 2000 2400 2800 3200 3600 4000 4400 4800 5200 5600
4 1816 - 2457 50.8 58.8 66.8 77.9 95.3 104.3 113.3 134.9 148.1 158.2
5 2295 - 3065 63.1 73.0 82.8 96.8 116.1 127.1 138.0 167.7 184.4 196.9
6 2749 - 3673 75.3 87.1 99.0 115.8 137.0 149.8 162.7 200.6 220.6 235.6
7 3203 - 4281 87.7 101.4 115.2 134.8 157.9 172.7 187.5 233.6 257.0 274.4
8 3811 - 4577 91.3 105.6 119.9 140.7 164.4 179.8 195.2 248.1 273.2 291.7
INSTALLATION CLEARANCES
Door Height (mm)
Number of Panels
Headroom (mm) Sideroom (mm)
Recommended Restricted Recommended each side
Standard Headroom (with opener)
Low Headroom (with opener)
Standard Headroom Low Headroom
Up to 5740W
5745 to 5870W
Up to 5740W
5745 to 5870W
Up to 5740W
5745 to 5870W
Up to 3065H 4 - 5 340 (390) 380 (430) 190 (240) 200 (250) 120 155 195
3129 to 4577H 6 - 8 380 (430) 380 (430) 200 (250) 200 (250) 120 195 195
Insulatedsteel sectional door
June 2016SECTION 08/10RETURN TO INDEX
notes
Product Code
ETG1
Insulatedsteel sectional door