VCX-HD VOLVO Installation Guide

VOLVO Vcads Pro Installation

VCX-HD OEMSetup Installation

Start Vehicle Diagnose

Contents：

VOLVO Vcads Pro Installation

3

Step1

Insert the VOLVO CD

to The CD-ROM.

The installation will run

automaticly.

If not. You can open

the CD. And click

“Setup.exe” to install.

VOLVO Vcads Pro Installation

4

Step2

Start install.

Click【NEXT】

VOLVO Vcads Pro Installation

5

Step3

Enter the Client ID:

401276

Click【NEXT】

VOLVO Vcads Pro Installation

6

Step4

Keep the Destination

Folder as default.

Click【NEXT】

VOLVO Vcads Pro Installation

7

Step5

Click【Install】

VOLVO Vcads Pro Installation

8

Step6

Installing……

VOLVO Vcads Pro Installation

9

Step7

Message of Modem

Click【OK】

VOLVO Vcads Pro Installation

10

Step8

This system must be

Restarted to complete

The installation.

Click【OK】

VOLVO Vcads Pro Installation

11

Step9

Open the CD, Goto the

Directory “KEY\”

Run the reg file:

Vcads_after_setup.reg

VOLVO Vcads Pro Installation

12

Step10

Click [Yes]

VOLVO Vcads Pro Installation

13

Step10

Open the CD, Goto the

Directory “KEY\”

Run the file:

Vcads_kg.exe

Select as the fig.

Click [do it].

VOLVO Vcads Pro Installation

14

Step10

Finished.

Click [OK]

VCX-HD OEMSetup Installation

15

After the installation of “VCX-HD Driver Install.exe”

You can find the shortcut menu:

Start->Program->ALLScanner->VCX-HD->OEMSetup->VCX-HD_RP1210_Setup.exe

Click to install the OEM support for VOLVO vcads pro

NOTICE：

Before install OEMSetup, You must firstly install “VCX-HD Driver Install.exe”

Reference《VCX Quick Start》.

VCX-HD OEMSetup Installation

16

VCX-HD RP1210

Driver Setup

Click【Accept】

VCX-HD OEMSetup Installation

17

VCX-HD RP1210

Driver Setup Completed.

Click【OK】

Start Vehicle Diagnose

18

NOTICE：

Before to start diagnose,

The device must be

properly connected and

activated.

Reference

《VCX Quick Start》

Start Vehicle Diagnose

19

Start Use vcads

Find the shortcut on

desktop

Double-click to run.

It will display this

message.

Input the User ID:

401276

Click【Log on】

Start Vehicle Diagnose

20

Vcads Usage

After the program run.

It will display “Identify”

dialog.

Click【Cancel】button

Start Vehicle Diagnose

21

Before test the vehicle.

Vcads need options.

Click the menu:

[tool] -> [Options…]

Start Vehicle Diagnose

22

Options:

Click the page:

“Comm.Unit Configuration”.

Select as the fig.

RP1210A adapter

VCX-HD

J1708

Start Vehicle Diagnose

23

Options:

Click the page:

“Comm.Unit Selection”.

Select all systems use

the“RP1210A adapter”

as the fig.

Click 【OK】.

Start Vehicle Diagnose

24

After options, then you

Can Start Diagnose.

Click the button

Use Manual matching.

And Select the Vehicle

Model.

Click [OK].

Start Vehicle Diagnose

25

Active job card:

Enter a Repair order no.

Click [OK].

Start Vehicle Diagnose

26

Diagnosing…

Then you can do it.