Post on 14-Jun-2015
description
transcript
“Puttin’ Lipstick
on a Pig!”
“Before”
Shoot Elevation
Line
Locate Starter Section
Snap a Line
Install the Starter Sections
Install Corners First
Then Place Panels
Left to Right
Splice 1. 2.
3. 4.
Keep Rows
Straight & Level
Remove Tongue for Splices
Before or As Illustrated
Locate Splices Randomly
Finished Splice
12” Sliding Miter Saw
Dry Diamond Blade
Wainscot Drip Cap under
Window
“Before”
“Before”
“Before”