Post on 20-Jul-2020
transcript
INTERNET COPY
Signatures removed for security reasons
Konrad ScheiberGeneral Manager
Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH,AT-1010 Vienna, Zelinkagasse 10/3
Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH awards this qualityaustria certificate to the following organisation:
The assessment was performed in compliance with EN9104-001:2013.
Certificate-Registration No.: 00015/0
This qualityaustria certificate confirms the compliance and further development of an effective
0632f5dd-414c-4bac-b95b-a2fe17156c7d
INTERNET COPY
Signatures removed for security reasons
Quality Austria - Trainings,Zertifizierungs und
Begutachtungs GmbH isaccredited according to
the Austrian AccreditationAct by the BMWFW(Federal Ministry of
Science, Research andEconomy).
Quality Austria isaccredited as anorganisation for
environmental verificationby the BMLFUW (Federal
Ministry of Agriculture,Forestry, Environment and
Water Management).
Quality Austria isauthorized by the VDA
(Association of theAutomotive Industry).
For accreditationregistration details please
refer to the applicabledecisions or recognition
documents.
Quality Austria is theAustrian member of IQNet(International Certification
Network).
CERTIFICATE
Expiry Date: 15 April 2021
Issue Date: 16 April 2018
Reissue Date: 14 May 2019
Gerald PerschlerSpecialist representative
ALPEX Technologies GmbHAT-6068 Mils, Gewerbepark 38Central Function
Certification Structure: Campus
Manufacturing of Tooling Systems, Jigs and milled Parts for Aerospace, Automotive and Mechanical Industries
Included Sites: according to appendix page 2 / 2
Page 1 / 2
QUALITY MANAGEMENT SYSTEMcomplying with the requirements of standard
EN 9100:2018 incl. product design (technically equivalent to AS 9100D and JISQ 9100:2018)including the requirements of
ISO 9001:2015
INTERNET COPY
Signatures removed for security reasons
Konrad ScheiberGeneral Manager
Quality Austria - Trainings, Zertifizierungs und Begutachtungs GmbH,AT-1010 Vienna, Zelinkagasse 10/3
023fb66a-61b4-4f8a-8687-9ae027180c44
INTERNET COPY
Signatures removed for security reasons
Certificate-Registration No.: 00015/0
APPENDIX to the certificate
Quality Austria - Trainings,Zertifizierungs und
Begutachtungs GmbH isaccredited according to
the Austrian AccreditationAct by the BMWFW(Federal Ministry of
Science, Research andEconomy).
Quality Austria isaccredited as anorganisation for
environmental verificationby the BMLFUW (Federal
Ministry of Agriculture,Forestry, Environment and
Water Management).
Quality Austria isauthorized by the VDA
(Association of theAutomotive Industry).
For accreditationregistration details please
refer to the applicabledecisions or recognition
documents.
Quality Austria is theAustrian member of IQNet(International Certification
Network).
Issue Date: 16 April 2018
Expiry Date: 15 April 2021
Reissue Date: 14 May 2019
Gerald PerschlerSpecialist representative
ALPEX Technologies GmbHAT-6068 Mils, Gewerbepark 30
Design, Engineering and Assembly of Tooling Systems, Jigs for Aerospace, Automotive and Mechanical Industries
Page 2 / 2
Quality Austria confirms, that the listed sites have been audited as part of the organisation listed on the certificate: