Post on 17-Jan-2016
description
transcript
SolidWorks
Part modeling
Assembly modeling
2D drawing
SolidWorks LayoutPull down menu View orientation, 2D and 3D
Principal planes
View toolbar
Sketch toolbar
Standard menu
Right click on any principal plane icon
SolidWorks Layout - Views
Two dimensional orthographic views
Front Right side Top
3D isometric view
View perpendicular to a selected plane
Zoom to fit
Previous view
Standard Orthographic views and 3D views
Pan
Rotate
Zoom window
Dynamic zoom
3D View Options
Wireframe
Hidden Lines Visible
Hidden Lines Removed
Shaded View
Provides shadow in shaded mode
SolidWorks Sketch Commands
Grid/Snap
Drawing tools
Modifying tools
2D Sketch Enter/Exit
3D Sketch
SolidWorks Sketch Commands
Importing an image into the sketch environment
Spline outlining the product
SolidWorks Sketch Commands
Project entities into a new sketch plane for reference
Projected entities
Fillet
Chamfer
MoveRotate
Rectangular Array Circular
Array
Mirror
Offset
Split entities
SolidWorks Sketch Commands
Locates the intersection of two planes and turns it into a sketch curve
Plane 1
Plane 2
Allows you to extract a curve for other applications, not active in sketch mode.
3D curve
Constraints
Two curved entities
Two straight entities
Apply constraints (relations) to entities. Select entities and then select the desired constraint
Selection window
Select