Post on 23-Feb-2016
description
transcript
1
IntroducingBMC Controls Ltd
2
Founded 1980 to sell and support Moog parison programming systems
3
We started producing bottle leak testers (by accident) in 1985 which also led to producing a range of related automation products
4
BMCCONTROLS
Parison Programming Systems
Denes B Hunkar, Inventor of the Electronic Parison Programmer, Internal parison cooling, Closed loop control of moulding processes
5
BMCCONTROLS
What the purpose of parison programming?
To enable you to distribute the material where you want it, enabling precise control of the wall thickness at virtually any point.
Without thickness control With thickness control
6
BMCCONTROLS
Research – Material distribution
7
BMCCONTROLS
Research – Material distribution
8
BMCCONTROLS
Parison Programming Systems
9
BMCCONTROLS
Parison Programming Systems
10
BMCCONTROLS
Parison Programming Systems
11
BMCCONTROLS
Servovalves
12
BMCCONTROLS
Parison Programming Systems
13
BMCCONTROLS
Other features of parison programming.
Automatic Weight Correction
By connecting a “weigh scale” to the parison programmer the die gap can be automatically adjusted to maintain a constant container weight
14
BMCCONTROLS
Other features of parison programming.
Automatic Parison Length control
A photocell senses the parison length prior to mould close and the die gap is automatically adjusted to keep the parison the correct length
15
BMCCONTROLS
Other features of parison programming.
Easy adjustment of container weights and trimming individual heads.
Safer – No need to climb up to the machine head or risk burns.
Reduction of material oxidation and thus contamination marks during machine shutdown
Settings are digitally repeatable
16
BMCCONTROLS
Acknowledgments
Moog Controls LtdServovalve photos and diagramswww.moog.com
Accuform (B-Sim) and AnsysSimulation of Parison Thicknesswww.t-sim.com www.ansys.com
Jordan, Apostal, Ritter (JAR)Simulation of bending, and blow moulding process simulation www.jar.com