Post on 29-Dec-2015
transcript
Introduction toAnalyticalChemistry
Dr M. Abd-ElhakeemFaculty of Biotechnology
General Chemistry
Lecture 7
What is Analytical Chemistry?Analytical chemistry is the study of the
separation, identification, and quantification of the chemical components of natural and artificial materials
1. Separation :
convert a mixture of substances into two or more distinct product.
Separations are carried out based on differences in physical or chemical properties such as size, shape, mass, or chemical affinity between the constituents of a mixture.
AnalyticalScience
Organic Chemistry
Materials Science
Medicine
Biochemistry
Forensic Science
Analytical Chemistry is a central science
Vocabulary AccuracyPrecision AnalyteBlankConcentrationCalibrationStandard AdditionStandardisation
Detection LimitInterferenceInternal StandardMaskingMatrix
Method: is the technique that used to extract, determine the type and the concentration of the analyte.
Accuracy: The accuracy of an analytical measurement is
how close a result comes to the true value. Determining the accuracy of a measurement usually requires calibration of the analytical method with a known standard.
PrecisionPrecision is the reproducibility of multiple
measurements and is usually described by the standard deviation, standard error.
Sample for chemical analysis of
Identify 1- Analyte 2- Sample matrix 3- Standard4- Interference5- Blank 6- Masking agent
Analyte: is a substance or chemical constituent that is of interest in an analytical procedure
Standard Standards are materials containing a known concentration of an analyte. They provide a reference to determine unknown concentrations or to calibrate analytical instruments.
Primary standard:A primary standard is a reagent that characterize by 1. High purity2. Stability (low reactivity) 3. Low hygroscopic (hydrophobic) 4. High solubility (if used in titration)
CalibrationMaking measurements with any
analytical method or instrument requires calibration to ensure the accuracy of the measurement. There are two common calibration procedures: using a standard curve, and the standard-addition method.
masking agent: is a reagent used in chemical analysis which reacts with chemical species that may interfere in the analysis.
Sensitivity: of a chemical analysis method is the ability to detect the minor amount of the analyte without interference.
Sample matrix: refers to the components of a sample other than the analyte. The matrix can have a considerable effect on the way the analysis is conducted and the quality of the results obtained.
Detection limit: It is the lowest quantity of a substance that can be distinguished from the absence of that substance.
Blank:
A blank solution is a solution containing no analyte of interest, usually used to calibrate instruments
Interference:
An interference is a substance, other than the assayed material, that can be measured by the chosen analytical method or that can prevent the assayed material from being measured.
Validation: Method validation is the process used to confirm that the analytical procedure employed for a specific test is suitable for its intended use.
It include Determination of 1. Detection limit2. Accuracy 3. Precision4. Linearity 5. Sensitivity 6. specificity
ECRIQIdentify the problem: translate general
questions into specific questions amenable to being answered through chemical measurements.
Selecting procedures SamplingSample preparation
Obtain a representative bulk sample from the lot.
a- Extract from the bulk sample a homogeneous laboratory sample.
b- Convert the laboratory sample into a form suitable for analysis, which usually means dissolving the sample. Samples with a low concentration of analyte may need to be concentrated prior to analysis.
c- Remove or mask species that interfere with the chemical analysis.
d- Identify and Quantify the analyte in several aliquots and also characterize the structure of the unknown compounds Reporting and interpretation