Post on 18-Oct-2015
description
transcript
Lovely Professional University, Punjab
Course Code Course Title Course Planner Lectures Tutorials Practicals Credits ELE521 POWER SYSTEM MODELING AND ANALYSIS 17092::Mukul Chankaya 3.0 0.0 0.0 3.0 Course Category Courses with numerical and conceptual focus
TextBooks Sr No Title Author Edition Year Publisher Name T-1 Power System Stability and Control P. Kundur 2nd 1994 Tata McGraw Hill
Reference Books
Sr No Title Author Edition Year Publisher Name R-1 Power System Analysis John J. Grainger and
Stevenson.D 2nd 1994 Tata McGraw Hill
R-2 Power Systems Modelling and Fault Analysis
Nasser D. Tleis 1st 2008 Elsevier
R-3 Electric Energy systems theory An Introduction
Olle L. Elgerd 1st 1982 Tata McGraw Hill
R-4 Power system operation and control P.S.R Murthy 3rd 1987 Tata McGraw Hill
Relevant Websites Sr No (Web address) (only if relevant to the course) Salient Features RW-1 Power system modeling http://nptel.iitm.ac.in/courses/108101004/
RW-2 Synchronous machine modeling http://nptel.iitm.ac.in/courses/108101004/11
RW-3 Excitation system modeling http://www.youtube.com/watch?v=5t06qtCUH08
RW-4 Transient Stability http://www.powerapps.org/PAES_TStability.aspx
RW-5 Small signal stability http://www.youtube.com/watch?v=FwlpLlACGs8
RW-6 Load flow analysis http://www.nptel.iitm.ac.in/courses/Webcourse-contents/IIT-KANPUR/power-system/ui/Course_home-4.htm
RW-7 Z bus algorithm http://askguru.net/s/algorithm-for-modification-of-z-bus-of-power-system-network
RW-8 Load forecasting http://www.youtube.com/watch?v=DVEbZ__FNRg
RW-9 Flux linkage model http://www.ewh.ieee.org/soc/es/Nov1998/08/SYNCMACH.HTM
LTP week distribution: (LTP Weeks)
Weeks before MTE 7
Weeks After MTE 7
Spill Over 3
Detailed Plan For Lectures
Week Number
Lecture Number
Broad Topic(Sub Topic) Chapters/Sections of Text/reference books
Other Readings, Relevant Websites, Audio Visual Aids, software and Virtual Labs
Lecture Description Learning Outcomes Pedagogical Tool Demonstration/ Case Study / Images / animation / ppt etc. Planned
Week 1 Lecture 1 Introduction to power system modeling(Distinction between steady state and Quasi steady state)
T-1:1 R-1:15
Differentiation between steady state and quasi state stability
students will understand the basic concept of stability
Lecture 2 Introduction to power system modeling(Gauss seidel iterative technique)
T-1:6.4.2 R-1:9.2 R-4:5.7
To study the load flow method of Gauss iteration method
Students will learn about the guass elimination tech of load flow
Lecture 3 Introduction to power system modeling(Newton-Raphson method for power flow)
T-1:6.4.3 R-1:9.4 R-4:5.9
RW-6
To study the concept of newton raphson method for load flow in power analysis
Students will learn about Newton raphson method of load flow
Showing the MATLAB simulink model for NR load flow method
Week 2 Lecture 4 Introduction to power system modeling(Multi area power flow analysis with tie line control)
R-3:9.2.5
RW-1
To learn the concept of multi area power flow analysis with tie line control
Students will learn about the coordination of multi area power flow with tie line
showing the Matlab simulink model regarding multi-area power flow analysis
Lecture 5 Introduction to power system modeling(Algorithm for symmetrical fault analysis using Z bus)
T-1:13.4.5 R-1:8.1
RW-7
To learn the basic algo for fault analysis
Students will be able to develop an algo for fault analysis
Lecture 6 Introduction to power system modeling(Symmetrical components and sequence impedances)
R-1:13.4 R-2:
R-4:7.2
To study the basic concepts related to Symmetrical components and sequential impedance
Students will understand the unsymmetrical fault solving using sequential components
Week 3 Lecture 7 Synchronous machine modeling(Mathematical description of a synchronous machine)
T-1:3.2 R-1:
R-2:5.2 R-3:4.2
RW-2
To learn the mathematical description of a synchronous machine
Students will learn about the modeling of synchronous machine
Lecture 8 Synchronous machine modeling(dq0 transformation)
T-1:3.3 R-2:5.3 R-3:4.2
To study the dqo transformation
students will learn about importance of dqo transformation
Lecture 9 Synchronous machine T-1:3.4 To study importance of Students will learn
modeling(Per unit transformation) R-2:5.2 R-3:4.2
Per unit in synchronous machine
about per unit representation of machine
Week 4 Lecture 10 Synchronous machine modeling(Equivalent circuit)
T-1:3.5 3.6
To study Basic equivalent circuit and steady state of synchronous machine
students will understand about the importance of equivalent circuit in steady state analysis
Synchronous machine modeling(Steady state analysis)
T-1:3.5 3.6 R-3:4.4
To study Basic equivalent circuit and steady state of synchronous machine
students will understand about the importance of equivalent circuit in steady state analysis
Lecture 11 Synchronous machine modeling(Transient performance characteristics)
T-1:3.7 R-2:5.3
RW-2
To study Transient performance characteristics
Students will understand about the transient performance of synchronous machine
Lecture 12 Quiz,Test1 Week 5 Lecture 13 Synchronous machine
modeling(Constant flux linkage model including the effect of sub transient circuits)
T-1:5.3
RW-9
To study Constant flux linkage model of synchronous machine
Students will understand about Constant flux linkage model
Lecture 14 Synchronous machine modeling(Review of machine modeling)
T-1:3.2.1 R-2:5.5
To study direct and quadrature axis of synchronous machine
Students will understand the concept of machine modeling
Lecture 15 Synchronous machine modeling(Classification of power system stability)
T-1:12.1 13.1
RW-5
To analyse and study classification of power system stability
Students will understand the different classes of power system stability
Week 6 Lecture 16 Synchronous machine modeling(Small signal stability analysis of SMIB)
T-1:12.3
To study the small signal stability analysis of Single machine infinite bus
Students will understand the importance of stability in single machine infinite bus
Lecture 17 Excitation system modeling(A.C. excitation system)
T-1:8.3.1 8.3.2
RW-3
To study the A.C. and D.C. excitation system
Students will learn the working of A.C. and DC excitation system and their interrelation
Excitation system modeling(D.C. excitation system)
T-1:8.3.1 8.3.2
RW-3
To study the A.C. and D.C. excitation system
Students will learn the working of A.C. and DC excitation system and their interrelation
Lecture 18 Quiz,Test2
Week 7 Lecture 19 Excitation system modeling(Dynamic performance of excitation system)
T-1:8.4
To study the dynamic performance of excitation system
Students will understand the excitation system performance in dynamic state
Excitation system modeling(Control and protective function of excitation system)
T-1:8.4
To study the dynamic performance of excitation system
Students will understand the excitation system performance in dynamic state
Lecture 20 Excitation system modeling(Control and protective function of excitation system)
T-1:8.4
To study the dynamic performance of excitation system
Students will understand the excitation system performance in dynamic state
Excitation system modeling(Dynamic performance of excitation system)
T-1:8.4
To study the dynamic performance of excitation system
Students will understand the excitation system performance in dynamic state
Lecture 21 Excitation system modeling(Modeling of excitation system)
T-1:8.6
To study modeling of excitation systemModeling of excitation system
Students will learn to make the mathematical model of excitation system
MID-TERM Week 8 Lecture 22 Small signal stability(Power
system stabilizer on small signal stability)
T-1:12.5 R-1:16.8 R-4:8.6
To learn the small signal stability of multimachine system
Students will understand the importance of PSS in power system stability
Lecture 23 Small signal stability(Small signal stability of multi-machine system)
T-1:12.7 R-1:16.8
To learn the small signal stability of multimachine system
Students will learn the effect of multi machine system on small signal stability
Lecture 24 Small signal stability(Analysis of large system)
T-1:12.8
RW-5
To study basic concepts related to large power system analysis
Students will understand the the large power system analysis
Week 9 Lecture 25 Small signal stability(Characteristics of small signal stability problem)
T-1:12.9
To learn characteristics of small signal stability problem
Students will understand the Characteristics of small signal stability problem
Lecture 26 Small signal stability(Method of improving small signal stability)
T-1:17.2 R-1:16.10
To study the different Method of improving small signal stability, Contigency lecture
Students will learn the Method of improving small signal stability
Lecture 27 Transient stability analysis(Interfacing of steam and
T-1:16.3
To learn about the interfacing of steam and
Students will understand about
hydro turbine-governor model) hydro turbine governing system
turbine governing system model
Week 10 Lecture 28 Transient stability analysis(Implicit method of modeling)
T-1:13.2
RW-4
To learn about the implicit method of modeling
Students will understand about the implicit method of transient modeling
Lecture 29 Transient stability analysis(Interfacing excitation system model with transient stability algorithm)
T-1:8.4
RW-8
To learn the interfacing of excitation system model and transient modeling
Students will observe about the use of transient stability algo in excitation system
Lecture 30 Transient stability analysis(Hydraulic turbine)
T-1:9.1
To learn about the importance of hydraulic turbine
Students will understand about working of hydraulic turbine in power generation
Week 11 Lecture 31 Transient stability analysis(Governing system of hydraulic turbine)
T-1:9.1
To analyse the working and importance of governing system of hydraulic turbine
Students will understand about the necessity of governing system
Lecture 32 Quiz,Test3 Lecture 33 Static var systems(Configuration
of static var system) T-1:11.2.7
L-33 To learn about the Configuration of static var system L-34 Contingency
L-33 Students will learn about the SVC and FACTS devices
L-34 Revision
showing the Matlab simulink model showing the SVC
Week 12 Lecture 34 Static var systems(Configuration of static var system)
T-1:11.2.7
L-33 To learn about the Configuration of static var system L-34 Contingency
L-33 Students will learn about the SVC and FACTS devices
L-34 Revision
showing the Matlab simulink model showing the SVC
Lecture 35 Static var systems(Thyristor controlled rectifier and Thyristror switched capacitor)
T-1:11.2.7 R-1:13.5
L-35 To learn TCR L-36 To learn TSC
Students will be able to learn about the basic facts devices and there operation in power system
Showing the Matlab simulimk model showing the TCR and TSC
Lecture 36 Static var systems(Thyristor controlled rectifier and Thyristror switched capacitor)
T-1:11.2.7 R-1:13.5
L-35 To learn TCR L-36 To learn TSC
Students will be able to learn about the basic facts devices and there operation in power system
Showing the Matlab simulimk model showing the TCR and TSC
Week 13 Lecture 37 Static var systems(Interfacing of static var devices with transient stability algorithm)
T-1:11.2.7
To learn the interfacing of static var device with transient stability algorithm
Students will understand the effect of static var device during transient instability in system
Lecture 38 Static var systems(Induction motor modeling)
T-1:7.2
L-38 To learn about the modeling of induction
L-38 Students will understand the
Showing the Matlab model of induction
machine
L-39 mathematical model of induction machine
modeling of induction machine L-39 students will learn about the mathematical description of machine
machine
Lecture 39 Static var systems(Induction motor modeling)
T-1:7.2
L-38 To learn about the modeling of induction machine
L-39 mathematical model of induction machine
L-38 Students will understand the modeling of induction machine L-39 students will learn about the mathematical description of machine
Showing the Matlab model of induction machine
Week 14 Lecture 40 Static var systems(Interfacing of induction modeling with transient modeling)
T-1:12.2
L-40 To learn about interfacing of induction modeling with transient modeling
L-41 Contingency
L-40 students will learn about behavior of induction machine with transient condition
L-41 Revision
Lecture 41 Static var systems(Method of improving transient stability)
T-1:17.1 R-4:8.5
L-41& L-42 To learn about several method of transient stability improvement
L-41 Students will understand the 1). Eular method 2). modified Eular method L-42 3). R.K. method of transient stability analysis
Lecture 42 Static var systems(Method of improving transient stability)
T-1:17.1 R-4:8.5
L-41& L-42 To learn about several method of transient stability improvement
L-41 Students will understand the 1). Eular method 2). modified Eular method L-42 3). R.K. method of transient stability analysis
SPILL OVER Week 15 Lecture 43 Spill Over
Lecture 44 Spill Over
Lecture 45 Spill Over
Scheme for CA:
Component Frequency Out Of Each Marks Total Marks
Quiz,Test 2 3 10 20
Total :-
10
20
Details of Academic Task(s)
AT No. Objective Topic of the Academic Task Nature of Academic Task (group/individuals/field
work
Evaluation Mode Allottment / submission Week
Test1 To analyse the students knowledge about power system modeling and analysis
Distinction between steady state and Quasi steady state, Gauss seidel iterative technique, Newton-Raphson method for power flow, Multi area power flow analysis with tie line control, Algorithm for symmetrical fault analysis using Z bus, Symmetrical components and sequence impedance, Mathematical description of a synchronous machine, dq0 transformation, Steady state analysis, Equivalent circuit, Transient performance characteristics
Individual On the basis of students performance in written test
3 / 4
Test2 To analyse the students knowledge in power system modeling and analysis
Constant flux linkage model including the effect of sub transient circuits, Review of machine modeling, Classification of power system stability, Small signal stability analysis of SMIB, A.C. excitation system, D.C. excitation system, Transient performance characteristics
Individual On the basis of students performance in written test
5 / 6
Quiz1 To analyse the students knowledge of student about the power system modeling and analysis
Power system stabilizer on small signal stability, Small signal stability of multi-machine system, Analysis of large system, Characteristics of small signal stability problem, Method of improving small signal stability, Interfacing of steam and hydro turbine-governor model, Implicit method of modeling, Interfacing excitation system model with transient stability algorithm, Hydraulic turbine, Governing system of hydraulic turbine, Steam turbine, Governing system of steam turbine
Individual On the basis of students performance in Quiz.
10 / 11