Post on 21-Jul-2016
description
transcript
International Standards in processAn International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 May to 31 May 2012
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 1 Screw threads
ISO/CD 965-1 ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data
TC 6 Paper, board and pulps
ISO/CD 14453 Pulps — Determination of acetone-soluble matter
TC 10 Technical product documentation
ISO/CD 17599 Technical product documentation (TPD) — General requirements of digital mock-up for mechanical products
TC 17 Steel
ISO/CD 683-18 Heat-treatable steels, alloy steels and free-cutting steels — Part 18: Bright products of unalloyed and low alloy steels
TC 20 Aircraft and space vehicles
ISO/CD 27027 Aerospace — Solid-state remote power controllers — General performance requirements
ISO/CD 7257 Aircraft — Hydraulic tubing joints and fittings — Rotary flexure test
TC 22 Road vehicles
ISO/CD 19072-1
Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 1: Pocket interface definition
ISO/CD 19072-2
Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 2: Test methods and general performance requirements
TC 23 Tractors and machinery for agriculture and forestry
ISO/DTR Tractors and machinery for agriculture and forestry — Basic types — Part 2: Codification for road-use
12934-2
ISO/CD 11783-7
Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 7: Implement messages application layer
ISO/CD 11783-12
Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 12: Diagnostics services
TC 28 Petroleum products and lubricants
ISO/CD 17196 Dimethyl ether (DME) for fuels — Determination of impurities — Gas chromatographic method
ISO/CD 17197 Dimethyl ether (DME) for fuels — Determination of water content — Karl Fischer titration method
ISO/CD 17198 Dimethyl ether (DME) for fuels — Determination of total sulfur, ultraviolet fluorescence method
ISO/CD 17786 Dimethyl ether (DME) for fuels — Determination of evaporation residues — Mass analysis method
TC 33 Refractories
ISO/CD 16835 Refractory products — Determination of thermal expansion
TC 38 Textiles
ISO/CD 16533 Textiles — Measurement of exothermic and endothermic properties of textiles under humidity change
ISO/CD 17299-1
Textiles — Determination of deodorant property — Part 1: General principle
ISO/CD 17299-2
Textiles — Determination of deodorant property — Part 2: Detector tube method
ISO/CD 17299-3
Textiles — Determination of deodorant property — Part 3: Gas chromatography method
ISO/CD 17617 Textiles — Determination of simulated sweat drying rate
TC 41 Pulleys and belts (including veebelts)
ISO/CD 10247 Conveyor belts — Characteristics of covers — Classification
TC 43 Acoustics
ISO/CD 9295 Acoustics — Measurement of high-frequency noise emitted by computer and business equipment
TC 61 Plastics
ISO/CD 17221 Plastics — Determination of image clarity (degree of sharpness of reflected or transmitted image)
ISO/CD 22007-6
Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/CD 16440 Petroleum and natural gas industries — Pipeline transportation systems — Design, construction and maintenance of steel cased pipelines
TC 96 Cranes
ISO/CD 16715 Cranes — Hand signals used with cranes
ISO/CD 16716 Cranes — Monitoring for crane design life
TC 98 Bases for design of structures
ISO/CD 4355 Bases for design of structures — Determination of snow loads on roofs
TC 106 Dentistry
ISO/CD 22674 Dentistry — Metallic materials for fixed and removable restorations and appliances
ISO/CD 9680 Dentistry — Operating lights
ISO/CD 16954 Dentistry — Test methods for evaluating microbiological treatment methods for dental unit procedural water
TC 113 Hydrometry
ISO/CD 4375 Hydrometric determinations — Cableway systems for stream gauging
TC 118 Compressors and pneumatic tools, machines and equipment
ISO/CD 11148-13
Hand-held non-electric power tools — Safety requirements — Part 13: Fastener driving tools
TC 123 Plain bearings
ISO/CD 17606 Plain bearings — Lubrication characteristics of cross-heads pin bearings for low speed marine diesel engines
TC 130 Graphic technology
ISO/CD 12643-1
Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements
ISO/CD 12647-5
Graphic technology — Process control for the manufacture of half-tone colour separations, proof and production prints — Part 5: Screen printing
TC 131 Fluid power systems
ISO/CD 10767-1
Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method for determining source flow ripple and source impedance of pumps
ISO/CD 10771-1
Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes — Part 1: Test method
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 15494 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE) and polypropylene (PP) — Specifications for components and the system — Metric series
TC 142 Cleaning equipment for air and other gases
ISO/CD 15957 Challenge contaminants for testing air cleaning equipment
TC 146 Air quality
ISO/CD 8672 Air quality — Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy — Membrane filter method
TC 154 Processes, data elements and documents in commerce, industry and administration
ISO/CD 9735-10
Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 1) — Part 10: Syntax service directories
TC 159 Ergonomics
ISO/CD 9241-940
Ergonomics of human-system interaction — Part 940: Evaluation of tactile and haptic interactions
TC 163 Thermal performance and energy use in the built environment
ISO/CD 6781-3 Performance of buildings — Detection of heat, air and moisture irregularities in buildings by infrared methods — Part 3: Qualifications of Equipment Operators, Data Analysts and Report Writers
TC 165 Timber structures
ISO/CD 17754 Torsional Resistance of Driving in Screws
TC 172 Optics and photonics
ISO/CD 10110-5
Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
ISO/CD 10110-19
Optics and photonics — Preparation of drawings for optical elements and systems — Part 19: Optical freeform surfaces
ISO/CD 14999-4
Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110
ISO/CD 17328 Optics and photonics — Optical materials and components — Test method for refractive index of infrared optical materials
ISO/CD 11979-6
Ophthalmic implants — Intraocular lenses — Part 6: Shelf-life and transport stability
TC 184 Automation systems and integration
ISO/CD 22400-1
Automation systems and integration — Key performance indicators for manufacturing operations management — Part 1: Overview, concepts and terminology
TC 188 Small craft
ISO/CD 6185-3 Inflatable boats — Part 3: Boats with a maximum motor power rating of 15 kW and greater
TC 201 Surface chemical analysis
ISO 18115-1:2010/CD Amd 1
Surface chemical analysis — Vocabulary — Part 1: General terms and terms used in spectroscopy — Amendment 1
ISO 18115-2:2010/CD Amd 1
Surface chemical analysis — Vocabulary — Part 2: Terms used in scanning-probe microscopy — Amendment 1
TC 204 Intelligent transport systems
ISO/DTR 17465 Intelligent transport systems - Definition of terms for "Cooperative ITS" and guidelines for standards
ISO/CD 17931 Intelligent transport systems — Extension of map database specifications for Local Dynamic Map for applications of Cooperative ITS
ISO/DTS 17931 Intelligent transport systems — Extension of map database specifications for Local Dynamic Map for applications of Cooperative ITS
TC 210 Quality management and corresponding general aspects for medical devices
ISO/IEC DTR 24971
Guidance on the application of ISO 14971
TC 218 Timber
ISO/CD 17959 General requirements for solid wood flooring
JTC 1 Information technology
ISO/IEC CD 29182-3
Reference architecture for sensor network applications and services — Part 3: Reference architecture views
ISO/IEC CD 29182-4
Reference architecture for sensor network applications and services — Part 4: Entity models
ISO/IEC 15414:2006/PDAM 1
Information technology — Open distributed processing — Reference model — Enterprise language — Amendment 1: ODP — The expression of Obligations and Policies
ISO/IEC CD 11770-3
Information technology — Security techniques — Key management — Part 3: Mechanisms using asymmetric techniques
ISO/IEC 13818- Information technology — Generic coding of moving pictures and associated audio information: Systems —
1/PDAM 3 Part 1: — Amendment 3: Transport of HEVC video over MPEG-2 systems
ISO/IEC 14496-1:2010/PDAM 2
Information technology — Coding of audio-visual objects — Part 1: Systems — Amendment 2: Support for raw audio-visual data
ISO/IEC 14496-10:2012/PDAM 2
Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 2
ISO/IEC 14496-15:2010/PDAM 2
Information technology — Coding of audio-visual objects — Part 15: Advanced Video Coding (AVC) file format — Amendment 2: Carriage of high-efficiency video coding (HEVC)
ISO/IEC CD 14496-29
Web video coding — Part 29:
ISO/IEC 23000-12:2010/PDAM 3
Information technology — Multimedia application format (MPEG-A) — Part 12: Interactive music application format — Amendment 3
ISO/IEC CD 23001-8
Information technology — MPEG systems technologies — Part 8: Coding-independent code-points
ISO/IEC 23003-3:2012/PDAM 1
Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Amendment 1: Conformance
ISO/IEC 23003-3:2012/PDAM 2
Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Amendment 2: Reference software
ISO/IEC 23007-3:2011/PDAM 1
Information technology — Rich media user interfaces — Part 3: Conformance and reference software — Amendment 1: Conformance and reference software for widget extension and AUI
ISO/IEC CD 23009-2
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 2: Conformance and reference software
ISO/IEC CD 23009-4
Information technology — Dynamic adaptive streaming over HTTP (DASH) — Part 4: Segment Encryption and Authentication
ISO/IEC CD 15961-4
Information technology — Radio frequency identification (RFID) for item management: Data protocol — Part 4: Application interface commands for battery assist and sensor functionality
ISO/IEC CD 30119
Quality Standard for the Creation and Delivery of Fair, Valid and Reliable e-Tests
DIS circulated
Period from 01 May to 31 May 2012
These documents have obtained substantial support within the appropriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 8 Ships and marine technology
ISO/DIS 16446 Ships and marine technology — Marine environment protection — Adapter for joining dissimilar boom connectors
2012-10-26
(Revision of ISO 16446:2002)
TC 17 Steel
ISO/DIS 3573 * Hot-rolled carbon steel sheet of commercial and drawing qualities 2012-09-25(Revision of ISO 3573:2008)
ISO/DIS 3574 * Cold-reduced carbon steel sheet of commercial and drawing qualities 2012-09-25(Revision of ISO 3574:2008)
TC 20 Aircraft and space vehicles
ISO/DIS 6517 * Air cargo — Certified lower deck containers — Design and testing 2012-10-23(Revision of ISO 6517:1992)
ISO/DIS 14186 * Air cargo — Fire containment covers — Design, performance and testing requirements 2012-10-26
ISO/DIS 16049-2
* Air cargo equipment — Restraint straps — Part 2: Utilization guidelines and lashing conditions
2012-10-29
(Revision of ISO 16049-2:2005)
TC 21 Equipment for fire protection and fire fighting
ISO/DIS 6182-10
* Fire protection — Automatic sprinkler systems — Part 10: Requirements and test methods for domestic sprinklers
2012-10-16
(Revision of ISO 6182-10:2006)
TC 22 Road vehicles
ISO/DIS 11451-4
* Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI)
2012-10-09
(Revision of ISO 11451-4:2006)
ISO/IEC DIS 15118-2
Road vehicles — Vehicle to grid communication interface — Part 2: Network and application protocol requirements
2012-10-19
ISO/DIS 13052 * Road vehicles — Trailers up to 3,5t — Requirements for jockey wheels and drawbar supports
2012-10-26
ISO/DIS 21308-5
* Road vehicles - Product data exchange between chassis and body work manufacturers (BEP) — Part 5: Coding of loader crane bodywork
2012-10-23
TC 23 Tractors and machinery for agriculture and forestry
ISO/DIS 3776-2 * Tractors and machinery for agriculture — Seat belts — Part 2: Anchorage strength requirements
2012-10-30
(Revision of ISO 3776-2:2007)
TC 24 Particle characterization including sieving
ISO/DIS 12154 * Determination of density by volumetric displacement — Skeleton density by gas pycnometry
2012-10-05
ISO/DIS 20998-2
* Measurement and characterization of particles by acoustic methods — Part 2: Guidelines for linear theory
2012-10-05
TC 28 Petroleum products and lubricants
ISO/DIS 5163 * Petroleum products — Determination of knock characteristics of motor and aviation fuels — Motor method
2012-10-11
(Revision of ISO 5163:2005, ISO 5163:2005/Cor 1:2008)
ISO/DIS 5164 * Petroleum products — Determination of knock characteristics of motor fuels — Research method
2012-10-11
(Revision of ISO 5164:2005)
TC 30 Measurement of fluid flow in closed conduits
ISO/DIS 4064-3 * Water meters intended for the metering of cold potable water and hot water — Part 3: Test report format
2012-10-04
(Revision of ISO 4064-3:2005)
ISO/DIS 4064-4 * Water meters intended for the metering of cold potable water and hot water — Part 4: Non-metrological requirements not covered in ISO 4064-1
2012-10-04
(Revision of ISO 4064-1:2005)
ISO/DIS 4064-5 * Water meters intended for the metering of cold potable water and hot water — Part 5: Installation requirements
2012-10-04
(Revision of ISO 4064-2:2005)
TC 31 Tyres, rims and valves
ISO 10231:2003/DAmd 1
* Motorcycle tyres — Test methods for verifying tyre capabilities — Amendment 1 2012-10-24
TC 33 Refractories
ISO/DIS 5017 * Dense shaped refractory products — Determination of bulk density, apparent porosity and true porosity
2012-10-03
(Revision of ISO 5017:1998)
TC 38 Textiles
ISO/DIS 16373-2
* Textiles — Dyestuffs — Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic substances
2012-10-04
ISO/DIS 20743 * Textiles — Determination of antibacterial activity of textile products 2012-10-25(Revision of ISO 20743:2007)
TC 39 Machine tools
ISO/DIS 14955-1
* Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools
2012-10-01
TC 42 Photography
ISO/DIS 15739 * Photography — Electronic still-picture imaging — Noise measurements 2012-10-10(Revision of ISO 15739:2003)
TC 43 Acoustics
ISO/DIS 11200 * Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions
2012-10-25
(Revision of ISO 11200:1995, ISO 11200:1995/Cor 1:1997)
ISO/DIS 12999-1
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation
2012-10-18
(Revision of ISO 140-2:1991, ISO 140-2:1991/Cor 1:1993)
ISO/DIS 16251-1
* Acoustics — Laboratory measurement of the reduction of transmittedimpact noise by floor coverings on a small floor mock-up — Part 1: Heavyweight compact floor
2012-10-04
TC 44 Welding and allied processes
ISO/DIS 5826 * Resistance welding equipment — Transformers — General specifications applicable to all transformers
2012-11-01
(Revision of ISO 5826:1999)
ISO * Gas welding equipment — Materials for equipment used in gas welding, cutting and allied 2012-10-25
9539:2010/DAmd 1
processes — Amendment 1
ISO/DIS 5817 * Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
2012-10-11
(Revision of ISO 5817:2003, ISO 5817:2003/Cor 1:2006)
TC 45 Rubber and rubber products
ISO/DIS 16565 * Rubber — Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
2012-10-10
(Revision of ISO 16565:2008)
TC 58 Gas cylinders
ISO/DIS 10462 * Gas cylinders — Acetylene cylinders — Periodic inspection and maintenance 2012-10-11(Revision of ISO 10462:2005)
TC 63 Glass containers
ISO/DIS 12818 * Glass packaging — Standard tolerances for flaconnage 2012-10-23
ISO/DIS 12821 * Glass packaging — 26 H 180 crown finish — Dimensions 2012-10-23
ISO/DIS 12822 * Glass packaging — 26 H 126 crown finish — Dimensions 2012-10-23
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/DIS 19900 * Petroleum and natural gas industries — General requirements for offshore structures 2012-10-04(Revision of ISO 19900:2002)
TC 70 Internal combustion engines
ISO/DIS 15619 * Reciprocating internal combustion engines — Measurement method for exhaust silencers — Sound power level of exhaust noise and insertion loss using sound pressure and power loss ratio
2012-10-17
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/DIS 12749-2
* Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 2: Radiological protection
2012-10-21
ISO/DIS 3925 * Unsealed radioactive substances — Identification and documentation 2012-10-28(Revision of ISO 3925:1978)
TC 96 Cranes
ISO/DIS 17440 * Cranes — General Design — Limit states and proof of competence of forged steel hooks 2012-10-21
TC 106 Dentistry
ISO/DIS 17304 * Dentistry — Polymerisation shrinkage: Method for determination of polymerisation shrinkage of polymer-based restorative materials
2012-10-29
TC 121 Anaesthetic and respiratory equipment
ISO/DIS 11197 * Medical supply units 2012-11-01(Revision of ISO 11197:2004)
TC 122 Packaging
ISO/DIS 16495.2
* Packaging — Transport packaging for dangerous goods — Test methods 2012-07-04
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/DIS 11297- * Plastics piping systems for renovation of underground drainage and sewerage networks 2012-10-18
1 under pressure — Part 1: General
ISO/DIS 11297-3
* Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 3: Lining with close-fit pipes
2012-10-18
TC 142 Cleaning equipment for air and other gases
ISO/DIS 10121-1
* Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 1: Gas-phase air cleaning media
2012-10-04
TC 154 Processes, data elements and documents in commerce, industry and administration
ISO/DIS 17369 * Statistical data and metadata exchange (SDMX) 2012-10-05(Revision of ISO/TS 17369:2005)
TC 157 Non-systemic contraceptives and STI barrier prophylactics
ISO/DIS 4074 Natural rubber latex male condoms — Requirements and test methods 2012-10-18
(Revision of ISO 4074:2002, ISO 4074:2002/Cor 1:2003, ISO 4074:2002/Cor 2:2008)
TC 176 Quality management and quality assurance
ISO/DIS 10008 Quality Management - Customer satisfaction - Guidelines for business-to-consumer electronic commerce transactions
2012-10-19
TC 178 Lifts, escalators and moving walks
ISO/DIS 22559-1
* Safety requirements for lifts (elevators) — Part 1: Global essential safety requirements (GESRs)
2012-10-16
(Revision of ISO/TS 22559-1:2004)
TC 190 Soil quality
ISO/DIS 13876 * Soil quality — Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD)
2012-10-21
ISO/DIS 13913 * Soil quality — Determination of selected phthalates using capillary gas chromatography with mass spectrometric detection (GC/MS)
2012-10-24
ISO/DIS 16729 * Soil quality — Digestion of nitric acid soluble fractions of elements 2012-10-17
TC 197 Hydrogen technologies
ISO/DIS 14687-3
Hydrogen fuel — Product specification — Part 3: Proton exchange membrane (PEM) fuel cell applications for stationary appliances
2012-11-01
TC 198 Sterilization of health care products
ISO 11137-1:2006/DAmd 1
* Sterilization of health care products — Radiation — Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices — Amendment 1
2012-10-04
ISO 15883-1:2006/DAmd 1
* Washer-disinfectors — Part 1: General requirements, terms and definitions and tests — Amendment 1
2012-10-04
TC 201 Surface chemical analysis
ISO/DIS 16531 * Surface chemical analysis — Depth profiling — Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS
2012-10-15
TC 202 Microbeam analysis
ISO/DIS 15932 * Microbeam analysis — Analytical electron microscopy — Vocabulary 2012-10-23
TC 204 Intelligent transport systems
ISO/DIS 15638-7
* Intelligent transport systems — Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) — Part 7: Other applications
2012-10-16
TC 205 Building environment design
ISO/DIS 13612-1
* Heating and cooling systems in buildings — Method for calculation of the system performance and system design for heat pump systems — Part 1: Design and dimensioning
2012-10-08
ISO/DIS 13612-2
* Heating and cooling systems in buildings — Method for calculation of the system performance and system design for heat pump systems — Part 2: Energy calculation
2012-10-08
TC 206 Fine ceramics
ISO/DIS 14544 * Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of compression properties
2012-10-23
ISO/DIS 14574 * Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at high temperature - Determination of tensile properties
2012-10-23
TC 213 Dimensional and geometrical product specifications and verification
ISO/DIS 10360-8.2
* Geometrical product specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 8: CMMs with optical distance sensors
2012-07-25
TC 244 Industrial furnaces and associated processing equipment
ISO/DIS 13574 * Industrial furnaces and associated processing equipment — Vocabulary 2012-10-03
TMB Technical Management Board
ISO/DIS 80079-36
Explosive atmospheres — Part 36: Non-electrical equipment for use in explosive atmospheres — Basic methods and requirements
2012-11-03
ISO/DIS 80079-37
Explosive atmospheres — Part 37: Non-electrical equipment for use in explosive atmospheres — Non-electrical type of protection constructional safety 'c', control of ignition sources 'b', liquid immersion 'k'
2012-11-03
ISO/IEC DIS 80079-38
Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres in underground mines
2012-11-03
JTC 1 Information technology
ISO/IEC DIS 20005
Information technology — Sensor networks — Services and interfaces supporting collaborative information processing in intelligent sensor networks
2012-10-16
ISO/IEC DIS 29182-1
Information technology — Sensor networks: Sensor network reference architecture (SNRA) — Part 1: General overview and requirements
2012-10-16
ISO/IEC DIS 29182-2
Information technology — Sensor networks: Sensor network reference architecture (SNRA) — Part 2: Vocabulary and terminology
2012-10-25
ISO/IEC DIS 18026
Information technology — Spatial Reference Model (SRM) 2012-10-12
(Revision of ISO/IEC 18026:2009)
ISO/IEC DIS 27000
Information technology — Security techniques — Information security management systems — Overview and vocabulary
2012-10-26
(Revision of ISO/IEC 27000:2009)
ISO/IEC DIS 29191
Information technology — Security techniques — Requirements for partially anonymous, partially unlinkable authentication.
2012-10-23
ISO/IEC 13818-2/DAmd 1
Information technology — Generic coding of moving pictures and associated audio information: Video — Part 2: Amendment 1: Frame packing arrangement signalling for quincunx pattern — Amendment 1: Extension to MPEG2-Video frame packing arrangement type to signal use of side by side with quincunx
2012-10-15
ISO/IEC 14496-10:2012/DAmd 1
Information technology — Coding of audio-visual objects — Part 10: Advanced Video Coding — Amendment 1: Additional profiles and supplemental enhancement information (SEI) messages
2012-10-12
ISO/IEC 21000-3:2003/DAmd 2
Information technology — Multimedia framework (MPEG-21) — Part 3: Digital Item Identification — Amendment 2: Digital item semantic relationships
2012-10-12
ISO/IEC 23001-4:2011/DAmd 1
Information technology — MPEG systems technologies — Part 4: Codec configuration representation — Amendment 1: RVC-CAL extensions
2012-10-12
ISO/IEC DIS 24769-2
Information technology — Real-time locating system (RTLS) device conformance test methods — Part 2: Test methods for air interface communication at 2,4 GHz
2012-10-16
ISO/IEC 2382-36:2008/DAmd 1
Information technology — Vocabulary — Part 36: Learning, education and training — Amendment 1
2012-10-12
FDIS circulated
Period from 01 May to 31 May 2012
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 2 Fasteners
ISO/FDIS 4161 * Hexagon nuts with flange, style 2 — Coarse thread 2012-07-19(Revision of ISO 4161:1999)
ISO/FDIS 7043 * Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A and B
2012-07-19
(Revision of ISO 7043:1997)
ISO/FDIS 7044 * Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B
2012-07-19
(Revision of ISO 7044:1997)
ISO/FDIS 10663 * Hexagon nuts with flange, style 2 — Fine pitch thread 2012-07-19(Revision of ISO 10663:1999)
ISO/FDIS 12125 * Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 — Product grades A and B
2012-07-19
(Revision of ISO 12125:1997)
ISO/FDIS 12126 * Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 — Product grades A and B
2012-07-19
(Revision of ISO 12126:1997)
ISO 16047:2005/FDAmd 1
* Fasteners — Torque/clamp force testing — Amendment 1 2012-08-25
TC 8 Ships and marine technology
ISO/FDIS 13073-1
* Ships and marine technology - Risk assessment on anti-fouling systems on ships — Part 1: Marine environmental risk assement method of biocidally active substances used for anti-fouling systems on ships
2012-07-12
TC 10 Technical product documentation
IEC/FDIS 82079-1
* Preparation of instructions for use — Structuring, content and presentation — Part 1: General principles and detailed requirements
2012-06-25
ISO/FDIS 13444 * Technical product documentation (TPD) — Dimensioning and indication of knurling 2012-07-17
TC 17 Steel
ISO/FDIS 5001 * Cold-reduced carbon steel sheet for vitreous enamelling 2012-07-12(Revision of ISO 5001:2007)
ISO/FDIS 16162 * Cold-rolled steel sheet products — Dimensional and shape tolerances 2012-07-29(Revision of ISO 16162:2010)
ISO/FDIS 16163 * Continuously hot-dipped coated steel sheet products — Dimensional and shape tolerances
2012-07-29
(Revision of ISO 16163:2010)
ISO/FDIS 15698-1
* Steel for the reinforcement of concrete — Headed bars — Part 1: Requirements 2012-07-31
ISO/FDIS 15698-2
* Steel for the reinforcement of concrete — Headed bars — Part 2: Test methods 2012-07-31
TC 28 Petroleum products and lubricants
ISO/FDIS 8217 Petroleum products — Fuels (class F) — Specifications of marine fuels 2012-07-26
(Revision of ISO 8217:2010, ISO 8217:2010/Cor 1:2011)
TC 29 Small tools
ISO/FDIS 5608 * Turning and copying tool holders and cartridges for indexable inserts — Designation 2012-07-22(Revision of ISO 5608:1995)
TC 31 Tyres, rims and valves
ISO/FDIS 4209-2
* Truck and bus tyres and rims (metric series) — Part 2: Rims 2012-07-15
(Revision of ISO 4209-2:2001)
TC 33 Refractories
ISO/FDIS 1927-1
* Monolithic (unshaped) refractory products — Part 1: Introduction and classification 2012-07-04
(Revision of ISO 1927:1984)
TC 34 Food products
ISO/FDIS 11747 * Rice — Determination of rice kernel resistance to extrusion after cooking 2012-07-11
TC 35 Paints and varnishes
ISO/FDIS 9117-4
* Paints and varnishes — Drying tests — Part 4: Test using a mechanical recorder 2012-07-18
ISO/FDIS 9117-5
* Paints and varnishes — Drying tests — Part 5: Modified Bandow-Wolff test 2012-07-18
ISO/FDIS 13129 * Paints and varnishes — Electrochemical measurement of the protection provided to steel by paint coatings — Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements
2012-08-01
TC 38 Textiles
ISO/FDIS 1140 * Fibre ropes — Polyamide — 3-, 4-, 8- and 12-strand ropes 2012-07-11(Revision of ISO 1140:2004)
ISO/FDIS 1141 * Fibre ropes — Polyester — 3-, 4-, 8- and 12-strand ropes 2012-07-11(Revision of ISO 1141:2004)
ISO/FDIS 1346 * Fibre ropes — Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) — 3-, 4-, 8- and 12-strand ropes
2012-07-11
(Revision of ISO 1346:2004)
ISO/FDIS 13029 * Textiles — Determination of drying rate in dynamic state by the modified sweating-guarded hotplate
2012-07-29
ISO/FDIS 13629-1
* Textiles — Determination of antifungal activity of textile products — Part 1: Luminescence method
2012-07-17
TC 45 Rubber and rubber products
ISO/FDIS 4656 * Rubber compounding ingredients — Carbon black — Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN)
2012-07-04
(Revision of ISO 4656:2007)
TC 54 Essential oils
ISO/FDIS 3517 * Essential oil of neroli (Citrus aurantium L., syn. Citrus amara Link, syn. Citrus bigaradia Loisel, syn. Citrus vulgaris Risso)
2012-07-04
(Revision of ISO 3517:2002)
TC 58 Gas cylinders
ISO/FDIS 7866.2
* Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing
2012-07-04
(Revision of ISO 7866:1999)
ISO/FDIS 11119-1
* Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l
2012-07-15
(Revision of ISO 11119-1:2002)
ISO/FDIS 11119-2
* Gas cylinders — Refillable composite gas cylinders and tubes — Design, construction and testing — Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners
2012-07-08
(Revision of ISO 11119-2:2002)
TC 61 Plastics
ISO/FDIS 12418-1
* Plastics — Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates — Part 1: Designation system and basis for specifications
2012-07-16
ISO/FDIS 12418-2
* Plastics — Post-consumer poly(ethylene terephthalate) (PET) bottle reyclates — Part 2: Preparation of test specimens and determination of properties
2012-07-16
ISO/FDIS 1922 * Rigid cellular plastics — Determination of shear strength 2012-07-17(Revision of ISO 1922:2001)
TC 70 Internal combustion engines
ISO/FDIS 8178-9
* Reciprocating internal combustion engines — Exhaust emission measurement — Part 9: Test cycles and test procedures for test bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions
2012-07-09
(Revision of ISO 8178-9:2000, ISO 8178-9:2000/Amd 1:2004)
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO/FDIS 16204 * Durability — Service life design of concrete structures 2012-07-23
TC 84 Devices for administration of medicinal products and intravascular catheters
ISO/FDIS 23907 * Sharps injury protection — Requirements and test methods — Sharps containers 2012-08-01
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/FDIS 29661 * Reference radiation fields for radiation protection — Definitions and fundamental concepts
2012-07-11
TC 86 Refrigeration and air-conditioning
ISO/FDIS 13971 * Refrigeration systems and heat pumps — Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes — Requirements and classification
2012-07-30
TC 108 Mechanical vibration, shock and condition monitoring
ISO/FDIS 18437-1
* Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines
2012-07-23
TC 110 Industrial trucks
ISO/FDIS 13564-1.2
* Powered industrial trucks — Test methods for verification of visibility — Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
2012-07-12
TC 113 Hydrometry
ISO/FDIS 6421 * Hydrometry — Methods for assessment of reservoir sedimentation 2012-07-12
TC 118 Compressors and pneumatic tools, machines and equipment
ISO/FDIS 11148-7
* Hand-held non-electric power tools — Safety requirements — Part 7: Grinders 2012-07-25
TC 119 Powder metallurgy
ISO/FDIS 5755 * Sintered metal materials — Specifications 2012-08-01(Revision of ISO 5755:2001)
TC 123 Plain bearings
ISO/FDIS 13939 * Foil bearings — Guidelines for testing of the performance of foil journal bearings --Testing of load capacity, friction coefficient and lifetime
2012-07-12
TC 131 Fluid power systems
ISO/FDIS 1219-2
* Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams
2012-07-29
(Revision of ISO 1219-2:1995)
ISO/FDIS 6953-3
* Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
2012-07-12
TC 146 Air quality
ISO/FDIS 16000-26
* Indoor air — Part 26: Sampling strategy for carbon dioxide (CO2) 2012-07-18
TC 147 Water quality
ISO/FDIS 5814 * Water quality — Determination of dissolved oxygen — Electrochemical probe method 2012-07-04(Revision of ISO 5814:1990)
TC 150 Implants for surgery
ISO/FDIS 14708-2
* Implants for surgery — Active implantable medical devices — Part 2: Cardiac pacemakers 2012-07-15
(Revision of ISO 14708-2:2005)
TC 161 Control and protective devices for gas and/or oil burners and appliances
ISO/FDIS 23551-1
* Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 1: Automatic and semi-automatic valves
2012-07-17
(Revision of ISO 23551-1:2006)
TC 164 Mechanical testing of metals
ISO/FDIS 12107 * Metallic materials — Fatigue testing — Statistical planning and analysis of data 2012-07-23(Revision of ISO 12107:2003)
ISO/FDIS 12108 * Metallic materials — Fatigue testing — Fatigue crack growth method 2012-07-23(Revision of ISO 12108:2002)
TC 172 Optics and photonics
ISO/FDIS 13666 * Ophthalmic optics — Spectacle lenses — Vocabulary 2012-08-04(Revision of ISO 13666:1998, ISO 13666:1998/DAmd 1.2)
TC 182 Geotechnics
ISO/FDIS 22476-1
* Geotechnical investigation and testing — Field testing — Part 1: Electrical cone and piezocone penetration test
2012-09-01
ISO/FDIS 22476-5
* Geotechnical investigation and testing — Field testing — Part 5: Flexible dilatometer test 2012-08-25
ISO/FDIS 22476-7
* Geotechnical investigation and testing — Field testing — Part 7: Borehole jack test 2012-08-25
TC 184 Automation systems and integration
ISO/FDIS 18435-2
* Industrial automation systems and integration — Diagnostics, capability assessment and maintenance applications integration — Part 2: Descriptions and definitions of application domain matrix elements
2012-07-24
TC 190 Soil quality
ISO/FDIS 14238 * Soil quality — Biological methods — Determination of nitrogen mineralization and nitrification in soils and the influence of chemicals on these processes
2012-07-22
(Revision of ISO 14238:1997)
TC 197 Hydrogen technologies
ISO/FDIS 17268 * Gaseous hydrogen land vehicle refuelling connection devices 2012-07-15(Revision of ISO 17268:2006)
TC 198 Sterilization of health care products
ISO/FDIS 13408-7
* Aseptic processing of health care products — Part 7: Alternative processes for atypical medical devices and combination products
2012-07-15
TC 202 Microbeam analysis
ISO/FDIS 15632 * Microbeam analysis — Instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers for use in electron probe microanalysis
2012-07-12
(Revision of ISO 15632:2002)
ISO/FDIS 16592 * Microbeam analysis — Electron probe microanalysis — Guidelines for determining the carbon content of steels using a calibration curve method
2012-07-22
(Revision of ISO 16592:2006)
TC 204 Intelligent transport systems
ISO/FDIS 17263 * Intelligent transport systems — Automatic vehicle and equipment identification — System parameters
2012-07-11
(Revision of ISO/TS 17263:2003)
TC 209 Cleanrooms and associated controlled environments
ISO/FDIS 14644-9.2
* Cleanrooms and associated controlled environments — Part 9: Classification of surface cleanliness by particle concentration
2012-07-25
TC 213 Dimensional and geometrical product specifications and verification
ISO/FDIS 5436-2
* Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards
2012-07-25
(Revision of ISO 5436-2:2001, ISO 5436-2:2001/Cor 1:2006, ISO 5436-2:2001/Cor 2:2008)
TC 215 Health informatics
ISO/IEEE FDIS 11073-10406
* Health informatics — Personal health device communication — Part 10406: Device specialization — Basic electrocardiograph (ECG) (1- to 3-lead ECG)
2012-11-01
TC 218 Timber
ISO/FDIS 16415 * Non-structural timber grading requirements 2012-07-15
TC 219 Floor coverings
ISO/FDIS 11638.2
* Resilient floor coverings — Heterogeneous poly(vinyl chloride) flooring on foam — Specification
2012-07-23
TC 221 Geosynthetics
ISO/FDIS 10772 * Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions
2012-07-25
ISO/FDIS 10776 * Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, under load
2012-07-18
IULTCS International Union of Leather Technologists and Chemists Societies
ISO/FDIS 17131 * Leather - Identification of leather with microscopy 2012-07-25
CASCO Committee on conformity assessment
ISO/IEC FDIS 17065
* Conformity assessment — Requirements for bodies certifying products, processes and services
2012-07-18
(Revision of ISO/IEC Guide 65:1996)
JTC 1 Information technology
ISO/IEC/IEEE FDIS 8802-11
* Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications
2012-10-19
(Revision of ISO/IEC 8802-11:2005, ISO/IEC 8802-11:2005/Amd 6:2006, ISO/IEC 8802-11:2005/Amd 4:2006, ISO/IEC 8802-11:2005/Amd 5:2006)
ISO/IEC 14443-2:2010/FDAmd 2
* Identification cards — Contactless integrated circuit cards — Proximity cards — Part 2: Radio frequency power and signal interface — Amendment 2: Additional PICC classes
2012-07-16
ISO/IEC 14496- * Information technology — Coding of audio-visual objects — Part 3: Audio — Amendment 2012-07-12
3:2009/FDAmd 3
3: Transport of unified speech and audio coding (USAC)
ISO/IEC FDIS 29174-2
* Information technology — UII scheme and encoding format for Mobile AIDC services — Part 2: Registration procedures
2012-07-15
(Revision of ISO/IEC CD 29174)
ISO/IEC 9995-7:2009/FDAmd 1
* Information technology — Keyboard layouts for text and office systems — Part 7: Symbols used to represent functions — Amendment 1
2012-07-17
ISO/IEC FDIS 29120-1
* Information technology — Machine readable test data for biometric testing and reporting — Part 1: Test reports
2012-07-25
Standards published
New International Standards published between 01 May and 31 May 2012
* Available in English only
** French version of standard previously published in English only
Price group
TC 2 Fasteners
ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 5: Set screws and similar threaded fasteners with specified hardness classes — Coarse thread and fine pitch thread
H
ISO 7041:2012 * Prevailing torque type hexagon nuts (with non-metallic insert), style 2 — Property classes 9 and 12
B
ISO 10509:2012 Hexagon flange head tapping screws C
TC 4 Rolling bearings
ISO 10285:2007/Amd 1:2012
Rolling bearings — Sleeve type linear ball bearings — Boundary dimensions and tolerances — Amendment 1
XZ
TC 6 Paper, board and pulps
ISO 1974:2012 Paper — Determination of tearing resistance — Elmendorf method G
TC 8 Ships and marine technology
ISO 30005:2012 * Ships and marine technology — Ship recycling management systems — Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations
M
ISO 11347:2012 Ships and marine technology — Large yachts — Measurement and assessment of the visual appearance of coatings
M
TC 10 Technical product documentation
ISO 6433:2012 Technical product documentation — Part references C
TC 17 Steel
ISO 630-3:2012 * Structural steels — Part 3: Technical delivery conditions for fine-grain structural steels J
ISO 630-4:2012 * Structural steels — Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates
H
TC 21 Equipment for fire protection and fire fighting
ISO 7240-10:2012 * Fire detection and alarm systems — Part 10: Point-type flame detectors Q
ISO 7076-1:2012 * Fire protection - Foam fire extinguishing systems — Part 1: Foam proportioning equipment
E
ISO 7076-2:2012 * Fire protection - Foam fire extinguishing systems — Part 2: Low expansion foam equipment
F
TC 22 Road vehicles
ISO 11452-9:2012 * Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 9: Portable transmitters
T
ISO 13296:2012 * Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions
F
ISO 13044-1:2012 * Road vehicles — 24 V fully automatic coupling systems (FACS) for heavy commercial vehicle combinations — Part 1: General requirements and definitions
C
ISO 4106:2012 * Motorcycles — Engine test code — Net power M
TC 27 Solid mineral fuels
ISO/TS 13605:2012
* Solid mineral fuels — Major and minor elements in hard coal ash and coke ash — Wavelength dispersive X-ray fluorescence spectrometric method
H
TC 29 Small tools
ISO 666:2012 Machine tools — Mounting of grinding wheels by means of hub flanges H
TC 34 Food products
ISO 15163:2012 Milk and milk products — Calf rennet and adult bovine rennet — Determination by chromatography of chymosin and bovine pepsin contents
K
ISO 15174:2012 Milk and milk products — Microbial coagulants — Determination of total milk-clotting activity
E
ISO/TS 17193:2011
Milk — Determination of the lactoperoxidase activity — Photometric method (Reference method)
C
ISO 7513:1990/Amd 1:2012
* Instant tea in solid form — Determination of moisture content (loss in mass at 103 degrees C) — Amendment 1
XZ
ISO 24115:2012 * Green coffee — Procedure for calibration of moisture meters — Routine method H
TC 37 Terminology and other language and content resources
ISO/TS 11669:2012
Translation projects — General guidance Q
TC 39 Machine tools
ISO 26303:2012 * Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools
S
TC 41 Pulleys and belts (including veebelts)
ISO 5296:2012 Synchronous belt drives — Belts with pitch codes MXL, XXL, XL, L, H, XH and XXH — Metric and inch dimensions
F
TC 42 Photography
ISO 18913:2012 * Imaging materials — Permanence — Vocabulary L
ISO 18926:2012 * Imaging materials — Information stored on magneto-optical (MO) discs — Method for estimating the life expectancy based on the effects of temperature and relative humidity
L
ISO 18933:2012 * Imaging materials — Magnetic tape — Care and handling practices for extended usage M
ISO 20462-3:2012 * Photography — Psychophysical experimental methods for estimating image quality — Part 3: Quality ruler method
M
TC 43 Acoustics
ISO 17497-2:2012 * Acoustics — Sound-scattering properties of surfaces — Part 2: Measurement of the directional diffusion coefficient in a free field
H
TC 44 Welding and allied processes
ISO 16834:2012 Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels — Classification
G
ISO 21952:2012 Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of creep-resisting steels — Classification
G
ISO 24598:2012 Welding consumables — Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels — Classification
J
ISO 22825:2012 Non-destructive testing of welds — Ultrasonic testing — Testing of welds in austenitic steels and nickel-based alloys
L
TC 45 Rubber and rubber products
ISO 2782-1:2012 Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 1: Differential-pressure methods
G
ISO 2782-2:2012 Rubber, vulcanized or thermoplastic — Determination of permeability to gases — Part 2: Equal-pressure method
D
ISO 2951:2012 * Rubber, vulcanized or thermoplastic — Determination of insulation resistance D
ISO 21461:2012 Rubber — Determination of the aromaticity of oil in vulcanized rubber compounds K
TC 46 Information and documentation
ISO 23081-1:2006 Information and documentation — Records management processes — Metadata for records — Part 1: Principles
K
TC 59 Buildings and civil engineering works
ISO 15686-2:2012 Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures
M
TC 61 Plastics
ISO 1183-1:2012 Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method
E
ISO 13975:2012 * Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems — Method by measurement of biogas production
G
ISO 17088:2012 Specifications for compostable plastics D
ISO 11833-1:2012 Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 1: Sheets of thickness not less than 1 mm
G
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/TS 29001:2010
Petroleum, petrochemical and natural gas industries — Sector-specific quality management systems — Requirements for product and service supply organizations
P
ISO 14723:2009 Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves
W
ISO 13500:2008/Amd 1:2010
Petroleum and natural gas industries — Drilling fluid materials — Specifications and tests — Amendment 1: Barite 4,1
XZ
ISO 13503-1:2011 Petroleum and natural gas industries — Completion fluids and materials — Part 1: Measurement of viscous properties of completion fluids
K
TC 68 Financial services
ISO 17442:2012 * Financial services — Legal Entity Identifier (LEI) C
TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO 1135-4:2012 Transfusion equipment for medical use — Part 4: Transfusion sets for single use H
ISO 11040-6:2012 Prefilled syringes — Part 6: Plastic barrels for injectables E
TC 79 Light metals and their alloys
ISO 13092:2012 * Titanium and titanium alloys — Titanium sponge A
TC 92 Fire safety
ISO 14934-3:2012 * Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
H
ISO/TR 26368:2012
Environmental damage limitation from fire-fighting water run-off M
TC 94 Personal safety -- Protective clothing and equipment
ISO 4007:2012 * Personal protective equipment — Eye and face protection — Vocabulary XA
TC 106 Dentistry
ISO 6876:2012 Dentistry — Root canal sealing materials E
TC 108 Mechanical vibration, shock and condition monitoring
ISO 21940-23:2012
* Mechanical vibration — Rotor balancing — Part 23: Enclosures and other protective measures for the measuring station of balancing machines
L
ISO 13379-1:2012 Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 1: General guidelines
Q
TC 110 Industrial trucks
ISO/TS 3691-8:2012
Industrial trucks — Safety requirements and verification — Part 8: Regional requirements for countries outside the European Community
D
TC 113 Hydrometry
ISO/TR 24578:2012
* Hydrometry — Acoustic Doppler profiler — Method and application for measurement of flow in open channels
S
TC 120 Leather
ISO 11398:2012 * Raw ostrich skins — Description of defects, guidelines for presentation and grading on C
basis of defects
TC 126 Tobacco and tobacco products
ISO 15152:2003/Amd 1:2012
Tobacco — Determination of the content of total alkaloids as nicotine — Continuous-flow analysis method — Amendment 1: .
XZ
ISO 15153:2003/Amd 1:2012
Tobacco — Determination of the content of reducing substances — Continuous-flow analysis method — Amendment 1: .
XZ
ISO 15154:2003/Amd 1:2012
Tobacco — Determination of the content of reducing carbohydrates — Continuous-flow analysis method — Amendment 1: .
XZ
ISO 15517:2003/Amd 1:2012
Tobacco — Determination of nitrate content — Continuous-flow analysis method — Amendment 1: .
XZ
TC 131 Fluid power systems
ISO 1219-1:2012 * Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications
XC
TC 145 Graphical symbols
ISO 7000:2012 * Graphical symbols for use on equipment — Registered symbols free
TC 146 Air quality
ISO 16000-19:2012
Indoor air — Part 19: Sampling strategy for moulds N
TC 147 Water quality
ISO 11350:2012 * Water quality — Determination of the genotoxicity of water and waste water — Salmonella/microsome fluctuation test (Ames fluctuation test)
R
TC 150 Implants for surgery
ISO 11658:2012 * Cardiovascular implants and extracorporeal systems — Blood/tissue contact surface modifications for extracorporeal perfusion systems
C
ISO 9714-1:2012 * Orthopaedic drilling instruments — Part 1: Drill bits, taps and countersink cutters D
TC 156 Corrosion of metals and alloys
ISO 9227:2012 Corrosion tests in artificial atmospheres — Salt spray tests K
TC 160 Glass in building
ISO 12543-6:2011/Cor 1:2012
Glass in building — Laminated glass and laminated safety glass — Part 6: Appearance — Technical Corrigendum 1
free
TC 163 Thermal performance and energy use in the built environment
ISO 16534:2012 * Thermal insulating products for building applications — Determination of compressive creep
H
ISO 16535:2012 * Thermal insulating products for building applications — Determination of long-term water absorption by immersion
E
ISO 16536:2012 * Thermal insulating products for building applications — Determination of long-term water absorption by diffusion
C
ISO 16537:2012 * Thermal insulating products for building applications — Determination of shear behaviour E
ISO 16544:2012 * Thermal insulating products for building applications — Conditioning to moisture equilibrium under specified temperature and humidity conditions
G
ISO 16545:2012 * Thermal insulating products for building applications — Determination of behaviour under cyclic loading
D
ISO 16546:2012 * Thermal insulating products for building applications — Determination of freeze-thaw resistance
C
TC 172 Optics and photonics
ISO 8578:2012 * Microscopes — Marking of objectives and eyepieces B
ISO 17123-4:2012 * Optics and optical instruments — Field procedures for testing geodetic and surveying instruments — Part 4: Electro-optical distance meters (EDM measurements to reflectors)
L
ISO 19980:2012 * Ophthalmic instruments — Corneal topographers L
TC 193 Natural gas
ISO 6974-1:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition
S
ISO 6974-2:2012 Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 2: Uncertainty calculations
H
TC 199 Safety of machinery
ISO/TR 14121-2:2012
* Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods
R
TC 204 Intelligent transport systems
ISO/TR 13185-1:2012
* Intelligent transport systems — Vehicle interface for provisioning and support of ITS services — Part 1: General information and use case definition
S
ISO 24534-1:2010 Automatic vehicle and equipment identification — Electronic registration identification (ERI) for vehicles — Part 1: Architecture
D
ISO 24534-2:2010 Automatic vehicle and equipment identification — Electronic registration identification (ERI) for vehicles — Part 2: Operational requirements
J
ISO 24534-3:2010 Automatic vehicle and equipment identification — Electronic registration identification (ERI) for vehicles — Part 3: Vehicle data
P
ISO 24534-4:2010 Automatic vehicle and equipment identification — Electronic registration identification (ERI) for vehicles — Part 4: Secure communications using asymmetrical techniques
X
ISO/TS 26683-1:2012
* Intelligent transport systems — Freight land conveyance content identification and communication (FLC-CIC) — Part 1: Context, architecture and referenced standards
W
TC 206 Fine ceramics
ISO 23145-2:2012 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of bulk density of ceramic powders — Part 2: Untapped density
D
TC 207 Environmental management
ISO 14045:2012 Environmental management — Eco-efficiency assessment of product systems — Principles, requirements and guidelines
R
ISO/TR 14047:2012
Environmental management — Life cycle assessment — Illustrative examples on how to apply ISO 14044 to impact assessment situations
X
ISO/TR 14049:2012
Environmental management — Life cycle assessment — Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis
T
TC 211 Geographic information/Geomatics
ISO 19148:2012 Geographic information — Linear referencing X
TC 215 Health informatics
ISO 21090:2011 Health informatics — Harmonized data types for information interchange XC
TC 217 Cosmetics
ISO 24443:2012 Determination of sunscreen UVA photoprotection in vitro N
TC 220 Cryogenic vessels
ISO 21013-4:2012 * Cryogenic vessels — Pilot operated pressure relief devices — Part 4: Pressure-relief accessories for cryogenic service
E
TC 223 Societal security
ISO 22300:2012 * Societal security — Terminology F
ISO 22301:2012 * Societal security — Business continuity management systems --- Requirements M
ISO 22320:2011 Societal security — Emergency management — Requirements for incident response L
TC 225 Market, opinion and social research
ISO 20252:2012 Market, opinion and social research — Vocabulary and service requirements R
TC 229 Nanotechnologies
ISO/TS 10797:2012
Nanotechnologies — Characterization of single-wall carbon nanotubes using transmission electron microscopy
Q
ISO/TR 13014:2012
* Nanotechnologies - Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment
Q
TC 246 Project committee: Anti-counterfeiting tools
ISO 12931:2012 Performance criteria for authentication solutions used to combat counterfeiting of material goods
N
JTC 1 Information technology
ISO/IEC 10646:2012
* Information technology — Universal Coded Character Set (UCS) XC
ISO/IEC 9834-1:2012
* Information technology — Procedures for the operation of object identifier registration authorities: General procedures and top arcs of the international object identifier tree — Part 1:
M
ISO/IEC 18023-1:2006/Amd 1:2012
* Information technology — SEDRIS — Part 1: Functional specification — Amendment 1 XZ
ISO/IEC 18023-3:2006/Amd 1:2012
* Information technology — SEDRIS — Part 3: Transmittal format binary encoding — Amendment 1
XZ
ISO/IEC 18024-4:2006/Amd 1:2012
* Information technology — SEDRIS language bindings — Part 4: C — Amendment 1 XZ
ISO/IEC 29192-1:2012
* Information technology — Security techniques — Lightweight cryptography — Part 1: General
G
ISO/IEC 15938-9:2005/Amd 1:2012
* Information technology — Multimedia content description interface — Part 9: Profiles and levels — Amendment 1: Extensions to profiles and levels
T
ISO/IEC 24730-2:2012
* Information technology — Real time locating systems (RTLS) — Part 2: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol
C
ISO/IEC 24730-21:2012
* Information technology — Real time locating systems (RTLS) — Part 21: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with a single spread code and employing a DBPSK data encoding and BPSK spreading scheme
P
ISO/IEC 24730-22:2012
* Information technology — Real time locating systems (RTLS) — Part 22: Direct Sequence Spread Spectrum (DSSS) 2,4 GHz air interface protocol: Transmitters operating with
K
multiple spread codes and employing a QPSK data encoding and Walsh offset QPSK (WOQPSK) spreading scheme
ISO/IEC 29160:2012
* Information technology — Radio frequency identification for item management — RFID Emblem
K
ISO/IEC 16680:2012
* Information technology — The Open Group Service Integration Maturity Model (OSIMM) W
Standards confirmed
The following International Standards are confimred for a five year period:
TC 4 Rolling bearings
ISO 10317:2008
TC 6 Paper, board and pulps
ISO 1924-2:2008
ISO 5630-1:1991 (reconfirmed)
ISO 5630-3:1996 (reconfirmed)
ISO 5630-4:1986 (reconfirmed)
ISO 5630-5:2008
ISO 8787:1986 (reconfirmed)
ISO 9895:2008
ISO 16532-1:2008
TC 10 Technical product documentation
ISO 15786:2008
TC 22 Road vehicles
ISO 3984:2004 (reconfirmed)
ISO 13215-2:1999 (reconfirmed)
ISO 13215-3:1999 (reconfirmed)
ISO/PAS 13396:2009
ISO/TS 22239-1:2009
ISO/TS 22239-2:2009
ISO/TS 22239-3:2009
ISO/TS 29062:2009
ISO 9259:1991 (reconfirmed)
TC 34 Food products
ISO 9832:2002
TC 54 Essential oils
ISO 7660:1983 (reconfirmed)
TC 59 Buildings and civil engineering works
ISO 12006-3:2007
ISO 22263:2008
TC 68 Financial services
ISO 22307:2008
TC 83 Sports and recreational equipment
ISO 6005:1991 (reconfirmed)
TC 96 Cranes
ISO 7296-1:1991 (reconfirmed)
TC 122 Packaging
ISO 8474:1986 (reconfirmed)
TC 185 Safety devices for protection against excessive pressure
ISO 4126-10:2010
Standards withdrawn
Period from 01 May to 31 May 2012
TC 8 Ships and marine technology
ISO/PAS 30005:2010 (replaced by ISO 30005:2012)
TC 17 Steel
ISO 630:1995 (replaced by ISO 630-1:2011, ISO 630-2:2011, ISO 630-3:2012, ISO 630-4:2012)
ISO 630:1995/Amd 1:2003 (replaced by ISO 630-1:2011, ISO 630-2:2011, ISO 630-3:2012, ISO 630-4:2012)
TC 41 Pulleys and belts (including veebelts)
ISO 5296-1:1989 (replaced by ISO 5296:2012)
ISO 5296-2:1989 (replaced by ISO 5296:2012)
TC 45 Rubber and rubber products
ISO 2782:2006 (replaced by ISO 2782-1:2012, ISO 2782-2:2012)
TC 108 Mechanical vibration, shock and condition monitoring
ISO 7475:2002 (replaced by ISO 21940-23:2012)
ISO 13379:2003 (replaced by ISO 13379-1:2012)
TMB Technical Management Board
ISO Guide 72:2001 (replaced by )
JTC 1 Information technology
ISO/IEC 24730-2:2012 (replaced by ISO/IEC 24730-21:2012, ISO/IEC 24730-22:2012)
ISO/IEC 24730-2:2006 (replaced by ISO/IEC 24730-21:2012, ISO/IEC 24730-22:2012)
Meeting calendar
(update at 01 May 2012)
Meetings called for the month of June are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
July 2012
6 San Francisco (USA)
TC 180 Solar energy
6 San Francisco (USA)
TC 180/SC 4
Solar energy/Systems - Thermal performance, reliability and durability
9-10 Shanghai (China)
TC 134 Fertilizers and soil conditioners
10-13
Geisenheim-Johannisberg (Germany)
JTC 2 Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology
16 Golden, Colorado (USA)
TC 44/SC 10
Welding and allied processes/Unification of requirements in the field of metal welding
16-17
Paris (France) JTC 1/SC 37 Information technology/Biometrics
18 Golden, Colorado (USA)
TC 44/SC 11
Welding and allied processes/Qualification requirements for welding and allied processes personnel
19 Berlin (Germany)
TC 261 Additive manufacturing
19-20
Golden, Colorado (USA)
TC 44 Welding and allied processes
20 Lancaster (USA)
TC 43/SC 2 Acoustics/Building acoustics
21 Stockholm (Sweden)
JTC 1/SC 29 Information technology/Coding of audio, picture, multimedia and hypermedia information
24-25
Beijing (China) TC 255 Biogas
August 2012
22-24
Berlin (Germany)
TC 212 Clinical laboratory testing and in vitro diagnostic test systems
24 Brussels (Belgium)
JTC 1/SC 24 Information technology/Computer graphics, image processing and environmental data representation
27-31
Montreal (Canada)
JTC 1/SC 35 Information technology/User interfaces
29 Berlin (Germany)
TC 79/SC 5 Light metals and their alloys/Magnesium and alloys of cast or wrought magnesium
September 2012
3-6 Stockholm (Sweden)
TC 110/SC 2
Industrial trucks/Safety of powered industrial trucks
3-7 La Rochelle (France)
TC 163 Thermal performance and energy use in the built environment
4-7 Zurich (Switzerland)
TC 172/SC 5
Optics and photonics/Microscopes and endoscopes
5-7 La Rochelle (France)
TC 205 Building environment design
7 Zurich (Switzerland)
TC 142 Cleaning equipment for air and other gases
7-8 Gelendzhik (Russian Federation)
TC 20/SC 8 Aircraft and space vehicles/Aerospace terminology
8-16 Busan (Korea, Republic of)
JTC 1/SC 36 Information technology/Information technology for learning, education and training
10 Milan (Italy) * TC 21/SC 2 Equipment for fire protection and fire fighting/Manually transportable fire extinguishers
10 Milan (Italy) TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and firefighting systems using foam and powder
10-11
Geneva (Switzerland)
JTC 1/SC 22 Information technology/Programming languages, their environments and system software interfaces
10-12
Milan (Italy) * TC 21/SC 5 Equipment for fire protection and fire fighting/Fixed firefighting systems using water
10-12
Moscow (Russian Federation)
TC 150/SC 1
Implants for surgery/Materials
10-12
Zibo city (China)
TC 206 Fine ceramics
10-12
Zurich (Switzerland)
TC 209 Cleanrooms and associated controlled environments
10-14
Geneva (Switzerland)
JTC 1/SC 25 Information technology/Interconnection of information technology equipment
10-14
Nancy (France) TC 108/SC 4
Mechanical vibration, shock and condition monitoring/Human exposure to mechanical vibration and shock
10-14
La Plaine St-Denis (France)
TC 153/SC 1
Valves/Design, manufacture, marking and testing
10-14
Helsinki (Finland)
TC 190 Soil quality
11 Moscow (Russian Federation)
TC 150/SC 5
Implants for surgery/Osteosynthesis and spinal devices
11 Moscow (Russian Federation)
TC 150/SC 7
Implants for surgery/Tissue-engineered medical products
14 Beijing (China) TC 23/SC 6 Tractors and machinery for agriculture and forestry/Equipment for crop protection
17-18
San Diego (USA)
TMB Technical Management Board
17-21
Seoul (Korea, Republic of)
TC 133 Sizing systems and designations for clothes
17-21
Stockholm (Sweden)
TC 165 Timber structures
18-20
Berlin (Germany)
TC 122 Packaging
19 Berlin (Germany)
TC 122/SC 3
Packaging/Performance requirements and tests for means of packaging, packages and unit loads (as required by ISO/TC 122)
19-20
Rio de Janeiro (Brazil)
TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
19-21
San Diego (USA)
GA General Assembly
21 Graz (Austria) JTC 1/SC 6 Information technology/Telecommunications and information exchange between systems
22 San Diego (USA)
COUNCIL Council
23-26
Sao Paulo (Brazil)
**
TC 164/SC 3
Mechanical testing of metals/Hardness testing
23-26
Vienna (Austria)
TC 215 Health informatics
24-25
Ottawa (Canada)
* TAG 8 Building
24-25
Sao Paulo (Brazil)
**
TC 164/SC 4
Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
24-25
Changsha (China)
* TC 264 Fireworks
24-26
Sydney (Australia)
* TC 54 Essential oils
24-28
Stockholm (Sweden)
JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)
25-26
Sao Paulo (Brazil)
**
TC 164/SC 2
Mechanical testing of metals/Ductility testing
25-27
Sao Paulo (Brazil)
**
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
27 Sao Paulo (Brazil)
**
TC 164/SC 1
Mechanical testing of metals/Uniaxial testing
28 Sao Paulo (Brazil)
**
TC 164 Mechanical testing of metals
Milan (Italy) **
TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems
Milan (Italy) **
TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas
Cadiz (Spain) **
TC 213 Dimensional and geometrical product specifications and verification
September-October 2012
30-6 Paris (France) TC 106 Dentistry
3rd Quarter 2012
Frankfurt (Germany)
**
TC 184/SC 1
Automation systems and integration/Physical device control
October 2012
1-2 Ottawa (Canada)
* TC 34/SC 11
Food products/Animal and vegetable fats and oils
1-5 Vienna (Austria)
TC 247 Fraud countermeasures and controls
3 Ottawa (Canada)
* TC 34/SC 2 Food products/Oleaginous seeds and fruits and oilseed meals
4-5 Montana-Vermala (Switzerland)
TC 226 Materials for the production of primary aluminium
5 Berlin (Germany)
* TC 79/SC 2 Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
6 Chicago (USA) * TC 130 Graphic technology
8 Berlin (Germany)
* TC 254 Safety of amusement rides and amusement devices
8-10 Castro Verde (Portugal)
TC 183 Copper, lead, zinc and nickel ores and concentrates
8-11 Nagoya (Japan)
TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
8-12 (USA) **
TC 154 Processes, data elements and documents in commerce, industry and administration
9-10 Montreal (Canada)
* TC 199 Safety of machinery
10-11
Berlin (Germany)
* TC 167 Steel and aluminium structures
10-12
Munich (Germany)
* TC 172/SC 6
Optics and photonics/Geodetic and surveying instruments
11-12
Bogota (Colombia)
* CASCO Committee on conformity assessment
11-12
Tokyo (Japan) * TC 119 Powder metallurgy
14-18
Tokyo (Japan) **
TC 10/SC 8 Technical product documentation/Construction documentation
14-19
Tokyo (Japan) TC 59 Buildings and civil engineering works
14-19
Praia do Forte (Brazil)
TC 127 Earth-moving machinery
15 Sydney (Australia)
TC 2/SC 7 Fasteners/Reference standards
15-19
Pointe-Claire, Quebec (Canada)
* TC 6 Paper, board and pulps
15-19
Riccione (Italy) * TC 45 Rubber and rubber products
15-19
Riccione (Italy) * TC 45/SC 1 Rubber and rubber products/Hoses (rubber and plastics)
15-19
Riccione (Italy) **
TC 45/SC 4 Rubber and rubber products/Products (other than hoses)
15-19
Amsterdam (Netherlands)
* TC 146 Air quality
15-19
Moscow (Russian Federation)
**
TC 204 Intelligent transport systems
16 Sydney (Australia)
TC 2/SC 11 Fasteners/Fasteners with metric external thread
17 Sydney (Australia)
TC 2/SC 14 Fasteners/Surface coatings
17 Jeju (Korea, Republic of)
TC 17/SC 7 Steel/Methods of testing (other than mechanical tests and chemical analysis)
17 Berlin (Germany)
* TC 22/SC 9 Road vehicles/Vehicle dynamics and road-holding ability
17-19
Guilin (China) TC 202 Microbeam analysis
18 Sydney (Australia)
TC 2/SC 12 Fasteners/Fasteners with metric internal thread
18 Riccione (Italy) * TC 45/SC 2 Rubber and rubber products/Testing and analysis
18 Berlin (Germany)
TC 83 Sports and recreational equipment
18-19
Jeju (Korea, Republic of)
TC 17 Steel
19 Sydney (Australia)
TC 2 Fasteners
19 Riccione (Italy) * TC 45/SC 3 Rubber and rubber products/Raw materials (including latex) for use in the rubber industry
21-26
Sapporo (Japan)
TC 92 Fire safety
21-26
Sapporo (Japan)
* TC 92/SC 2 Fire safety/Fire containment
22-26
Rome (Italy) * JTC 1/SC 27 Information technology/IT Security techniques
22-26
Messina (Italy) * TC 8 Ships and marine technology
22-26
(Japan) **
TC 181 Safety of toys
22-27
Jeju (Korea, Republic of)
TC 94/SC 15
Personal safety -- Protective clothing and equipment/Respiratory protective devices
23 Sydney (Australia)
**
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (including land drainage)
24 Sydney (Australia)
**
TC 138/SC 2
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for water supplies
24 Sydney (Australia)
**
TC 138/SC 4
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels
25 Sydney (Australia)
**
TC 138/SC 3
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications
25 Sydney (Australia)
**
TC 138/SC 5
Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications
25 Sydney (Australia)
**
TC 138/SC 6
Plastics pipes, fittings and valves for the transport of fluids/Reinforced plastics pipes and fittings for all applications
25 Sydney (Australia)
**
TC 138/SC 7
Plastics pipes, fittings and valves for the transport of fluids/Valves and auxiliary equipment of plastics materials
25 Elda (Alicante) (Spain)
TC 216 Footwear
25-26
Tampa, Florida (USA)
TC 112 Vacuum technology
25-27
Tampa, Florida (USA)
* TC 201 Surface chemical analysis
26 Sydney (Australia)
**
TC 138 Plastics pipes, fittings and valves for the transport of fluids
(USA) **
TC 36 Cinematography
(France) **
TC 70/SC 7 Internal combustion engines/Tests for lubricating oil filters
Yokohama (Japan)
**
TC 119/SC 3
Powder metallurgy/Sampling and testing methods for sintered metal materials (excluding hardmetals)
October-November 2012
29-1 Saitama (Japan)
TC 34/SC 17
Food products/Management systems for food safety
31-7 Orlando (USA) * TC 23/SC 18
Tractors and machinery for agriculture and forestry/Irrigation and drainage equipment and systems
November 2012
5 Berlin (Germany)
* TC 79/SC 2 Light metals and their alloys/Organic and anodic oxidation coatings on aluminium
5-8 Warsaw (Poland)
* TC 98 Bases for design of structures
5-10 Jeju (Korea, Republic of)
**
JTC 1 Information technology
6-8 Tokyo (Japan) * TC 17/SC 1 Steel/Methods of determination of chemical composition
6-8 Reykjavik (Iceland)
TC 234 Fisheries and aquaculture
10-17
St. Petersburg (Russian Federation)
TC 176 Quality management and quality assurance
11-16
Florida (USA) * TC 184/SC 4
Automation systems and integration/Industrial data
12-16
Kyoto (Japan) * TC 244 Industrial furnaces and associated processing equipment
15-16
Xian (China) * TC 227 Springs
16 Atlanta (USA) * TC 17/SC 12
Steel/Continuous mill flat rolled products
26-27
London (United Kingdom)
* TC 44/SC 8 Welding and allied processes/Equipment for gas welding, cutting and allied processes
26-30
Florianopolis (Brazil)
* TC 43 Acoustics
26-30
Florianopolis (Brazil)
* TC 43/SC 1 Acoustics/Noise
27-29
Washington, D.C (USA)
* TC 20 Aircraft and space vehicles
Wiesbaden (Germany)
**
TC 67/SC 3 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and completion fluids, and well cements
(USA) **
TC 118/SC 6
Compressors and pneumatic tools, machines and equipment/Air compressors and compressed air systems
Kyoto (Japan) **
TC 159/SC 4
Ergonomics/Ergonomics of human-system interaction
(Mexico) **
TC 229 Nanotechnologies
December 2012
11-12
Riyadh (Saudi Arabia)
* TC 211 Geographic information/Geomatics
4th Quarter 2012
(United Kingdom)
**
TC 157 Non-systemic contraceptives and STI barrier prophylactics
January 2013
7-12 London (United Kingdom)
* TC 121/SC 3
Anaesthetic and respiratory equipment/Lung ventilators and related equipment
(Unknown) **
TC 34/SC 16
Food products/Horizontal methods for molecular biomarker analysis
(Australia) **
TC 248 Project committee: Sustainability criteria for bioenergy
February 2013
4-8 St. Gallen (Switzerland)
* TC 94/SC 13
Personal safety -- Protective clothing and equipment/Protective clothing
4-9 London (United Kingdom)
* TC 58/SC 4 Gas cylinders/Operational requirements for gas cylinders
February-March 2013
25-1 (Korea, Republic of)
**
JTC 1/SC 35 Information technology/User interfaces
March 2013
19-22
Jeju (Korea, Republic of)
* TC 107 Metallic and other inorganic coatings
27-28
Geneva (Switzerland)
* COUNCIL Council
(Europe) **
TC 161 Control and protective devices for gas and/or oil burners and appliances
April 2013
8-11 Helsinki (Finland)
* TC 117 Fans
17-18
Xian (China) * TC 67/SC 2 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Pipeline transportation systems
22-26
Berlin (Germany)
TC 108/SC 5
Mechanical vibration, shock and condition monitoring/Condition monitoring and diagnostics of machines
23-24
Dresden (Germany)
**
TC 219 Floor coverings
Paris (France) **
TC 29/SC 5 Small tools/Grinding wheels and abrasives
Salzburg (Austria)
**
TC 89 Wood-based panels
Shenzen (China)
**
TC 130 Graphic technology
(USA) **
TC 178 Lifts, escalators and moving walks
(South Africa) **
TC 242 Energy Management
May 2013
13-16
Chicago (USA) **
TC 195 Building construction machinery and equipment
13-17
(Italy) **
TC 29 Small tools
13-17
(Italy) **
TC 29/SC 8 Small tools/Tools for pressing and moulding
13-17
Guangzhou (China)
* TC 68 Financial services
13-17
Guangzhou (China)
* TC 68/SC 2 Financial services/Financial Services, security
27-31
Shanghai (China)
* TC 4 Rolling bearings
Ottawa (Canada)
**
JTC 1/SC 38 Information technology/Distributed application platforms and services (DAPS)
(China) **
TC 10 Technical product documentation
Paris (France) **
TC 46/SC 11
Information and documentation/Archives/records management
(Unknown) **
TC 158 Analysis of gases
June 2013
5 Prague (Czech Republic)
**
TC 115 Pumps
17-21
Shanghai (China)
**
TC 121 Anaesthetic and respiratory equipment
Washington, D.C (USA)
**
TC 67/SC 3 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/Drilling and completion fluids, and well cements
2nd Quarter 2013
(Canada) **
TC 34/SC 4 Food products/Cereals and pulses
August 2013
26-30
(Canada) **
JTC 1/SC 35 Information technology/User interfaces
September 2013
18-20
St. Petersburg (Russian Federation)
* GA General Assembly
21 St. Petersburg (Russian Federation)
* COUNCIL Council
Paris (France) **
TC 17/SC 16
Steel/Steels for the reinforcement and prestressing of concrete
(Unknown) **
TC 21 Equipment for fire protection and fire fighting
Victoria (Canada)
**
TC 33 Refractories
(Korea, Republic of)
**
TC 123/SC 2
Plain bearings/Materials and lubricants, their properties, characteristics, test methods and testing conditions
(Korea, Republic of)
**
TC 123/SC 3
Plain bearings/Dimensions, tolerances and construction details
(Korea, Republic of)
**
TC 123/SC 5
Plain bearings/Quality analysis and assurance
(Korea, Republic of)
**
TC 123/SC 6
Plain bearings/Terms and common items
(Korea, Republic of)
**
TC 123/SC 7
Plain bearings/Special types of plain bearings
Tokyo (Japan) **
TC 142 Cleaning equipment for air and other gases
October 2013
7 Istanbul (Turkey)
**
TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
7-11 Istanbul (Turkey)
**
TC 38 Textiles
8 Istanbul (Turkey)
**
TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
9 Istanbul (Turkey)
**
TC 38/SC 23
Textiles/Fibres and yarns
10 Istanbul (Turkey)
**
TC 38/SC 24
Textiles/Conditioning atmospheres and physical tests for textile fabrics
11 Garching (Germany)
**
TC 60 Gears
11 Garching (Germany)
**
TC 60/SC 1 Gears/Nomenclature and wormgearing
11 Garching (Germany)
**
TC 60/SC 2 Gears/Gear capacity calculation
Sarajevo (Bosnia and Herzegovina)
**
TC 34/SC 12
Food products/Sensory analysis
(France) **
TC 111/SC 1
Round steel link chains, chain slings, components and accessories/Chains and chain slings
Berlin (Germany)
**
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
Beijing (China) **
TC 184/SC 2
Automation systems and integration/Robots and robotic devices
(Japan) **
TC 206 Fine ceramics
November 2013
10 Okinawa (Japan)
**
TC 201 Surface chemical analysis
10-15
Mexico (Mexico)
* TC 113 Hydrometry
(France) **
JTC 1 Information technology
4th Quarter 2013
(Korea, Republic of)
**
TC 106 Dentistry
Gaithersburg (USA)
**
TC 172/SC 9
Optics and photonics/Electro-optical systems
Month unknown 2013
(Australia) **
REMCO Committee on reference materials
(South Africa) **
TC 27 Solid mineral fuels
(South Africa) **
TC 37 Terminology and other language and content resources
(Unknown) **
TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
(South Africa) **
TC 44 Welding and allied processes
Porto de Galinhas (Brazil)
**
TC 135/SC 9
Non-destructive testing/Acoustic emission testing
(Norway) **
TC 138/SC 1
Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (including land drainage)
(Brazil) **
TC 155 Nickel and nickel alloys
(Sweden) **
TC 163 Thermal performance and energy use in the built environment
Amsterdam (Netherlands)
**
TC 164/SC 5
Mechanical testing of metals/Fatigue testing
(Unknown) **
TC 173/SC 2
Assistive products for persons with disability/Classification and terminology
(South Africa) **
TC 202 Microbeam analysis
(Sweden) **
TC 205 Building environment design
(Portugal) **
TC 228 Tourism and related services
(Finland) **
TC 257 General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions
February 2014
(South America)
**
JTC 1/SC 35 Information technology/User interfaces
May 2014
15 London (United Kingdom)
* TC 68 Financial services
Washington, D.C (USA)
**
TC 46/SC 11
Information and documentation/Archives/records management
September 2014
(South Africa) **
TC 178 Lifts, escalators and moving walks
October 2014
Prague (Czech Republic)
**
TC 135 Non-destructive testing
Month unknown 2014
(USA) **
REMCO Committee on reference materials
(Brazil) **
TC 28 Petroleum products and lubricants
Beijing (China) **
TC 36 Cinematography
(Germany) **
TC 37 Terminology and other language and content resources
(Japan) **
TC 44 Welding and allied processes
(USA) **
TC 142 Cleaning equipment for air and other gases
2nd Quarter 2015
(China) **
TC 172/SC 7
Optics and photonics/Ophthalmic optics and instruments
Month unknown 2015
(South Africa) **
REMCO Committee on reference materials
(Finland) **
TC 44 Welding and allied processes
London (United Kingdom)
**
TC 142 Cleaning equipment for air and other gases
(China) **
TC 155 Nickel and nickel alloys
Month unknown 2016
(Australia) **
TC 44 Welding and allied processes