Post on 23-Jun-2020
transcript
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS - 04/2015 1
JAMESTOWN175™ SERIESFixed, Projected and Casement Steel Windows
Hope’s Jamestown175 Series steel windows are manufactured from heavy custom hot-rolled steel profiles. All frames, ventilators and muntin bars are 1-3/4" in depth.
PRODUCT FEATURES
• A 20 percent increase in window profile depth, when compared to Hope's Landmark175™ Series, doubles the moment of inertia (I-value). Improved structural integrity results in larger window sizes without extra reinforcing or mullions.
• Accepts up to 1-1/8" thick glass with flush snap-in glazing beads
• Triple integral groove weatherstripping
• Solid brass or bronze hardware
• Hope's Power of 5 Finishing System includes cleaning, pretreatment, epoxy e-coat primer, epoxy powder primer and ultrathane polyurethane top coat.
Details are full scale.
134
OPERABLE DETAIL FIXED DETAIL
258
1 716
134
Triple integralgrooveweatherstripping
Snap-inglazing bead
Accepts up to1-1/8" glass
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 2
JAMESTOWN175™ SERIESFixed, Projected and Casement Steel Window
Recommended Sizes
Size based on 1" insulating glass with 1/4" panes.For requirements exceeding the sizes shown, consult Hope's for design alternatives.
CASEMENT VENTILATORS
PROJECT-IN VENTILATORS
HEI
GH
T (
ft)
WIDTH (ft)31 2 54 6 7 8
5
1
3
2
4
8
6
7
PROJECT-OUT VENTILATORS
FIXED WINDOWSH
EIG
HT
(ft
)
2
1
3
5
4
6
WIDTH (ft)31 2 54 6 87 109 1211 13
8
7
9
11
10
12
13
14
15
16
17
14 15 16 17
HEI
GH
T (
ft)
WIDTH (ft)31 2 54 6 7 8
5
1
3
2
4
8
6
7
MOTORIZED OPERATORH
EIG
HT
(ft
)
WIDTH (ft)31 2 54 6 7 8
5
1
3
2
4
8
6
7
ROTO OPERATOR
HEI
GH
T (
ft)
WIDTH (ft)31 2 54 6 7 8
HEI
GH
T (
ft)
WIDTH (ft)31 2 54 6 7 8
5
1
3
2
4
8
6
710
5
1
3
2
4
8
6
7
9
NOTE: Casements over 60" tall limited to 20° opening
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 3
JAMESTOWN175™ SERIESFixed, Projected and Casement Steel Window
Sample Elevations
Elevations are for detail reference only. Elevations are not to scale.All Hope's products are custom manufactured for your specific project requirements.
15
35
52
66
46
65 8
7
77
97
56
66
64
56
46
66
79 9
7
87
77
87
77
FIXED
PROJECT-OUT PROJECT-IN
SIDE HUNG-OUTSIDE HUNG-IN
CASEMENT
LEFT HANDSWING-OUT
LEFT HANDSWING-IN
RIGHT HANDSWING-OUT
RIGHT HANDSWING-IN
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 4
JAMESTOWN175™ SERIESFixed, Projected and Casement Steel Window
Sample Elevations
Elevations are for detail reference only. Elevations are not to scale.All Hope's products are custom manufactured for your specific project requirements.
108
118
128
118
159
169
149
108
138
179
159
149
118
108
15
14
9
9 9
9
16
17
TRUEDIVIDED
LITES (TDL)
SIMULATEDDIVIDED
LITES (SDL)
(MUNTINGRIDS)
FOR TRUE AND SIMULATEDDIVIDED LITES
SEE “MUNTINS, MULLIONS,STACKS AND DEFLECTION
CHANNELS” SECTION
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 5
JAMESTOWN175™ SERIESFixed, Projected and Casement Steel Window
Details
Details are half scale and shown inside glazed with 1" glass.See page 10 for further glazing bead options.
EQUAL LEG LONG LEG
EQUAL LEG LONG LEG
EQUAL LEG LONG LEG
1 716 2 3
16
134
1716
1 716
#32 snap-inglazing beadfor 1" glass
2 316
2 316
1
2
3
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 6
JAMESTOWN175™ SERIESFixed, Projected and Casement Steel Window
Details
Details are half scale and shown inside glazed with 5/8" glass.See page 10 for further glazing bead options.
EQUAL LEG LONG LEG
4
6
5
EQUAL LEG
EQUAL LEG
258
258
134
LONG LEG
LONG LEG
Triple integralgrooveweatherstripping
#30 snap-inglazing beadfor 5/8" glass
338
338
258 33
8
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 7
JAMESTOWN175™ SERIESFixed, Projected and Casement Steel Window
Details
Details are half scale and shown inside glazed with 1/4" glass.See page 10 for further glazing bead options.
EQUAL LEG LONG LEG
7
9
8
EQUAL LEG
EQUAL LEG
LONG LEG
LONG LEG
258
258
258
134
338
Triple integralgrooveweatherstripping
#300 snap-inglazing beadfor 1/4" glass
338
338
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 8
JAMESTOWN175™ SERIESFixed, Projected and Casement Steel Window
Details
Details are half scale and shown inside glazed with 5/8" glass.See page 10 for further glazing bead options.
10 11
12 13
338
4 916 4 9
16
338
134
Triple integralgrooveweatherstripping
#296 slopedhook-onglazing beadfor 5/8" glass
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 9
JAMESTOWN175™ SERIESFixed, Projected and Casement Steel Window
Details
Details are half scale and shown inside glazed with 1/4" glass.See page 10 for further glazing bead options.
#307 slopedhook-onglazing bead
Triple integralgroove weatherstripping
14 15
16 17
33833
8
4916 4 9
16
134
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 10
1/4" GLASS#300 BEAD
1/2" GLASS#303 BEAD
1/4" GLASS#307 BEAD
1/2" GLASS#302 BEAD
5/8" GLASS#30 BEAD
3/4" GLASS#305 BEAD
5/8" GLASS#296 BEAD
3/4" GLASS#304 BEAD
7/8" GLASS#31 BEAD
1" GLASS#232 BEAD
7/8" GLASS#231 BEAD
1" GLASS#32 BEAD
1-1/8" GLASS#33 BEAD
JAMESTOWN175™ SERIESFixed, Projected and Casement Steel Window
Glazing Beads
Details are half scale and shown inside glazed.
GLAZING BEAD NOTES
Hope's offers various types of glazing beads including: snap-in, hook-on and screw-on.
Consult Hope's for other options.
All true divided lite muntins have corresponding glazing beads to match the perimeter profiles.
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS - 04/2015 11
JAMESTOWN175™ SERIESTop Hung-Out and Pivoted Steel Windows
The classic heavy custom steel window, manufactured with hot-rolled steel profiles, is available in these specialty configurations. Top hung-out ventilators are designed to accommodate larger ventilators than the typical project-out. Horizontally pivoted windows are commonly used in industrial applications where pole or chain access from the floor is required. Vertically pivoted windows are commonly used in configurations where cleaning adjacent fixed windows is required in a long run of windows.
PRODUCT FEATURES
• Window profile depth of 1-3/4" increases the moment of inertia (I-value) and presents the opportunity to accommodate larger window sizes without extra reinforcing or mullions
• This strength allows for larger ventilator sizes without compromising performance
• Accepts up to 1-1/8" thick insulating glass with flush glazing beads
• Triple integral groove weatherstripping
• Solid brass or bronze hardware
• Hope's Power of 5 Finishing System includes cleaning, pretreatment, epoxy e-coat primer, epoxy powder primer and ultrathane polyurethane top coat.
Details are full scale.
OPERABLE DETAIL FIXED DETAIL
Triple integralgrooveweatherstripping
Snap-in glazing bead
Accepts up to1-1/8" glass
134
258
17
16
134
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 12
JAMESTOWN175™ SERIESTop Hung-Out and Pivoted Steel Window
Recommended Sizes
Size based on 1" insulating glass with 1/4" panes.For requirements exceeding the sizes shown, consult Hope's for design alternatives.
HORIZONTALLY PIVOTED VENTILATORS
VERTICALLY PIVOTED VENTILATORS
TOP HUNG-OUT VENTILATORS
HEI
GH
T (
ft)
WIDTH (ft)31 2 54 6 7 8
5
1
3
2
4
8
6
7
HEI
GH
T (
ft)
WIDTH (ft)31 2 54 6 7 8
5
1
3
2
4
8
6
7
HEI
GH
T (
ft)
WIDTH (ft)31 2 54 6 7 8
5
1
3
2
4
8
6
7
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 13
JAMESTOWN175™ SERIESTop Hung-Out and Pivoted Steel Window
Sample Elevations
Elevations are for detail reference only. Elevations are not to scale.All Hope's products are custom manufactured for your specific project requirements.
215
315
OPP
Window in final90° position
164
616
1
2
15
315
15
TOP HUNG-OUT
HORIZONTALLY PIVOTED VERTICALLY PIVOTED
IN
OUT
IN
OUT
16 15
165 2
15
6
164 1
15
3
IN OUTIN
OUT
SIDE VIEWOF WINDOW
PLAN VIEWOF WINDOW
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 14
JAMESTOWN175™ SERIESTop Hung-Out and Pivoted Steel Window
Sample Elevations
Elevations are for detail reference only. Elevations are not to scale.All Hope's products are custom manufactured for your specific project requirements.
TRUEDIVIDED
LITES (TDL)
SIMULATEDDIVIDED
LITES (SDL)
(MUNTINGRIDS)
FOR TRUE AND SIMULATEDDIVIDED LITES
SEE “MUNTINS, MULLIONS,STACKS AND DEFLECTION
CHANNELS” SECTION
1718
165 2
15817
164
215
1810
177
315
179
912
151
177
TOP HUNG-OUT HORIZONTALLY PIVOTED
VERTICALLY PIVOTED
516
215
315
1118
1018
717
179
IN OUT
IN OUT
153
215
1811
717
166
179
IN
OUT
OPP166 OPP
166
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 15
JAMESTOWN175™ SERIESTop Hung-Out and Pivoted Steel Window
Details
Details are half scale and shown inside glazed with 5/8" glass.See page 19 for further glazing bead options.
EQUAL LEG LONG LEG
EQUAL LEG LONG LEG
EQUAL LEG LONG LEG
1
3
2
Triple integralgrooveweatherstripping
#30 snap-inglazing beadfor 5/8" glass
338
338
258 33
8
258
258
134
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 16
JAMESTOWN175™ SERIESTop Hung-Out and Pivoted Steel Window
Details
Details are half scale and shown inside glazed with 1/4" glass.See page 19 for further glazing bead options.
EQUAL LEG LONG LEG
EQUAL LEG LONG LEG
EQUAL LEG LONG LEG
4
6
5
258 33
8
134
258
258
#300 snap-inglazing beadfor 1/4" glass
Triple integralgrooveweatherstripping
338
338
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 17
JAMESTOWN175™ SERIESTop Hung-Out and Pivoted Steel Window
Details
Details are half scale and shown inside glazed with 1" glass.See page 19 for further glazing bead options.
EQUAL LEG LONG LEG
EQUAL LEG LONG LEG
EQUAL LEG LONG LEG
1 716 2 3
16
134
1716
1 716
#32 snap-inglazing beadfor 1" glass
2 316
2 316
7
8
9
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 18
JAMESTOWN175™ SERIESTop Hung-Out and Pivoted Steel Window
Details
Details are half scale and shown inside glazed with 5/8" glass.See page 19 for further glazing bead options.
338
#296 slopedhook-onglazing beadfor 5/8" glass
338 10
12
338 11
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 19
JAMESTOWN175™ SERIESTop Hung-Out and Pivoted Steel Window
Glazing Beads
1/4" GLASS#300 BEAD
1/2" GLASS#303 BEAD
1/4" GLASS#307 BEAD
1/2" GLASS#302 BEAD
5/8" GLASS#30 BEAD
3/4" GLASS#305 BEAD
5/8" GLASS#296 BEAD
3/4" GLASS#304 BEAD
7/8" GLASS#31 BEAD
1" GLASS#232 BEAD
7/8" GLASS#231 BEAD
1" GLASS#32 BEAD
1-1/8" GLASS#33 BEAD
Details are half scale and shown inside glazed.
GLAZING BEAD NOTES
Hope's offers various types of glazing beads including: snap-in, hook-on and screw-on.
Consult Hope's for other options.
All true divided lite muntins have corresponding glazing beads to match the perimeter profiles.
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 20
JAMESTOWN175™ SERIESTop Hung-Out and Pivoted Steel Windows
INTENTIONALLY LEFT BLANK
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS - 04/2015 21
JAMESTOWN175™ SERIESSingle Hung Steel Windows
Hope's classic heavy custom steel window is available in single hung configurations. The operable sash are manufactured from hot-rolled steel profiles and have double weatherstripping, while the perimeter frame is custom formed 12 gauge galvanized steel. These windows are designed to accept up to 1-1/8" thick insulating glass.
PRODUCT FEATURES
• Ventilators are hung on spiral balances for up to 160 pounds
• Solidly fusion welded sash corners for superior strength and water tightness
• The custom formed steel frame is also solidly welded
• Accepts up to 1-1/8" thick insulating glass
• All ventilators are double weatherstripped with Q-Ion®
• Solid brass or bronze hardware
• Hope's Power of 5 Finishing System includes cleaning, pretreatment, epoxy e-coat primer, epoxy powder primer and ultrathane polyurethane top coat.
Details are full scale.
134
458
318
Insulatingglass
Hot-rolledsteel sash
Aluminumglazing beads
Aluminumadaptorwith doubleweatherstripping
12 gaugesteel frame
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 22
123
233
232
524
72424
6
244
RECOMMENDED SIZES
HEI
GH
T (
ft)
WIDTH (ft)31 2 54 6 7 8
5
1
3
2
4
8
6
7
TRUE DIVIDEDLITES (TDL)
SIMULATED DIVIDEDLITES (SDL)
(MUNTIN GRIDS)
FOR TRUE AND SIMULATEDDIVIDED LITES
SEE “MUNTINS, MULLIONS,STACKS AND DEFLECTION
CHANNELS” SECTION
JAMESTOWN175™ SERIESSingle Hung Steel Window
Sample Elevations and Recommended Sizes
Elevations are for detail reference only. Elevations are not to scale.All Hope's products are custom manufactured for your specific project requirements.
Size based on 1" insulating glass with 1/4" panes.
For requirements exceeding the sizes shown, consult Hope's for design alternatives.
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 23
JAMESTOWN175™ SERIESSingle Hung Steel Window
Details
Details are half scale and shown inside glazed.See page 25 for further glazing bead options.
318
238
2
#47 snap-in glazing beadfor 5/8" glass
#32 snap-in glazing beadfor 1" glass
Custom formed12 gauge steel frame
Hot-rolled steel sashdouble weatherstripping
1
2
3
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 24
JAMESTOWN175™ SERIESSingle Hung Steel Window
Details
Details are half scale and shown inside glazed.See page 25 for further glazing bead options.
#360 sloped hook-onglazing bead for 1/4" glass
#296 sloped hook-onglazing bead for 5/8" glass
UPPER SASH
LOWER SASH
2 716
23423
4
2 716
4 5
6 7
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 25
JAMESTOWN175™ SERIESSingle Hung Steel Window
Glazing Beads
1/4" GLASS#300 BEAD
1/2" GLASS#303 BEAD
1/4" GLASS#307 BEAD
1/2" GLASS#302 BEAD
5/8" GLASS#30 BEAD
3/4" GLASS#305 BEAD
5/8" GLASS#296 BEAD
3/4" GLASS#304 BEAD
7/8" GLASS#31 BEAD
1" GLASS#232 BEAD
7/8" GLASS#231 BEAD
1" GLASS#32 BEAD
1-1/8" GLASS#33 BEAD
Details are half scale and shown inside glazed.
GLAZING BEAD NOTES
Hope's offers various types of glazing beads including: snap-in, hook-on and screw-on.
Consult Hope's for other options.
All true divided lite muntins have corresponding glazing beads to match the perimeter profiles.
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 26
JAMESTOWN175™ SERIESSingle Hung Steel Windows
INTENTIONALLY LEFT BLANK
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS - 04/2015 27
JAMESTOWN175™ SERIESSwing Steel Doors
Details are full scale.
134
THRESHOLD DETAIL
12 gauge steel
Surface appliedweatherstripping
Aluminum orbronze threshold
Optional profile
Hope’s Jamestown175 Series steel doors are custom manufactured from 1-3/4" deep heavy custom hot-rolled steel profiles. Single and French-style configurations are available with various hardware options including mortise lock and multi-latching cremone. The steel door profiles are the same profiles as used in the Jamestown175 Series steel windows.
PRODUCT FEATURES
• This depth allows the use of a wider variety of door hardware
• Increased strength allows for larger door sizes without compromising performance
• Accepts up to 1-1/8" thick insulating glass with flush glazing beads
• Triple integral groove weatherstripping
• Solid brass or bronze hardware
• Hope's Power of 5 Finishing System includes cleaning, pretreatment, epoxy e-coat primer, epoxy powder primer and ultrathane polyurethane top coat.
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 28
RECOMMENDED SIZES
HEI
GH
T (
ft)
4
WIDTH (ft)321 75 6 8
631
329
315
314
328
3312
3413
631
329
327
314
327
315
328
LEFT HANDREVERSE BEVEL
(SWING-OUT)
LEFT HAND(SWING-IN)
RIGHT HANDREVERSE BEVEL(SWING-OUT)
RIGHT HAND(SWING-IN)
2
1
3
10
5
4
6
7
8
9
11
12
JAMESTOWN175™ SERIESSwing Steel Door
Sample Elevations and Recommended Sizes
Elevations are for detail reference only. Elevations are not to scale.All Hope's products are custom manufactured for your specific project requirements.
Size based on 1" insulating glass with 1/4" panes.
For requirements exceeding the sizes shown, consult Hope's for design alternatives.
Multipoint locks are recommended for doors over 9' tall.
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 29
JAMESTOWN175™ SERIESSwing Steel Door
Sample Elevations
Elevations are for detail reference only. Elevations are not to scale.All Hope's products are custom manufactured for your specific project requirements.
531
832
34
3415
14
431
732
1935
1835
932
316
531
832
230
17
1635 30
35
3
431
732
130
34
3415
14
9
8531 32
331334
32
12
30
113310
33
1
316
330
TRUEDIVIDED
LITES (TDL)
SIMULATEDDIVIDED
LITES (SDL)
(MUNTINGRIDS)
FOR TRUE AND SIMULATEDDIVIDED LITES
SEE “MUNTINS, MULLIONS,STACKS AND DEFLECTION
CHANNELS” SECTION
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 30
JAMESTOWN175™ SERIESSwing Steel Door
Details
Details are half scale and shown inside glazed with 1" glass.See page 36 for further glazing bead options.
FIXED
EQUAL LEG LONG LEG
EQUAL LEG LONG LEG
FIXED
FIXED
WITH THRESHOLD
134
1 716
2 316
1 716
2 316
134
1716
3
EQUAL LEG
1 716
LONG LEG
2 316
#32 snap-inglazing beadfor 1" glass
1
2
2
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 31
JAMESTOWN175™ SERIESSwing Steel Door
Details
Details are half scale and shown inside glazed with 5/8" glass.See page 36 for further glazing bead options.
#30 snap-inglazing beadfor 5/8" glass
SWING-OUT
4
SWING-OUT
5
EQUAL LEG LONG LEG
OFFSET FLOORFLAT FLOOR
258
338
134 13
4
EQUAL LEG
258
LONG LEG
338
Triple integralgrooveweatherstripping
#45 snap-inglazing beadfor 5/8" glass
Per projectrequirements
Per projectrequirements
SWING-OUT
6
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 32
JAMESTOWN175™ SERIESSwing Steel Door
Details
Details are half scale and shown inside glazed with 1/4" glass.See page 36 for further glazing bead options.
SWING-IN
7
SWING-IN
8
EQUAL LEG LONG LEG
SWING-IN
9
258
338
EQUAL LEG
FLAT FLOOR
258
134
Per projectrequirements
LONG LEG
Triple integralgrooveweatherstripping
#30 snap-inglazing beadfor 5/8" glass
338
OFFSET FLOOR
#45 snap-inglazing beadfor 5/8" glass
134
Per projectrequirements
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 33
JAMESTOWN175™ SERIESSwing Steel Door
Details
Details are half scale and shown inside glazed with 1" glass.See page 36 for further glazing bead options.
EQUAL LEG
LONG LEG
Snap-inglazing bead
Triple integralgrooveweatherstripping
338 33
8
MINIMUM75
8
MINIMUM6 7
8
SWING-OUT
10
SWING-IN
11
SWING-OUT
12
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 34
JAMESTOWN175™ SERIESSwing Steel Door
Details
Details are half scale and shown inside glazed with 1" glass.
EQUAL LEG
SWING-OUT
14
MINIMUM
ACTIVE LEAF
1178
MINIMUM
ACTIVE LEAF
1178
MINIMUM75
8
MINIMUM67
8
SWING-IN
13
LONG LEG
SWING-IN
15
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 35
JAMESTOWN175™ SERIESSwing Steel Door
Details
Details are half scale and shown inside glazed.
1/4 x 4steel flat
41316
258 1 7
16
41316
258 1 7
16
338 33
8
SWING-OUT
18SWING-IN
19
SWING-OUT
16SWING-IN
17
JAMESTOWN175™ SERIES STEEL WINDOWS & DOORS 36
JAMESTOWN175™ SERIESSwing Steel Door
Glazing Beads
Details are half scale and shown inside glazed.
1/4" GLASS#300 BEAD
1/2" GLASS#303 BEAD
1/4" GLASS#307 BEAD
1/2" GLASS#302 BEAD
5/8" GLASS#30 BEAD
3/4" GLASS#305 BEAD
5/8" GLASS#296 BEAD
3/4" GLASS#304 BEAD
7/8" GLASS#31 BEAD
1" GLASS#232 BEAD
7/8" GLASS#231 BEAD
1" GLASS#32 BEAD
1-1/8" GLASS#33 BEAD
GLAZING BEAD NOTES
Hope's offers various types of glazing beads including: snap-in, hook-on and screw-on.
Consult Hope's for other options.
All true divided lite muntins have corresponding glazing beads to match the perimeter profiles.