Jendan Hassan Windows server 2012 R 2 DHCP

Post on 02-Jul-2015

228 views 2 download

description

Windows server 2012 R 2 DHCP

transcript

By : Jendan Hassan Jendan Teacher :Ibrahim AL-Odaini

Article : Operating systems

I goanna be in this project how installing the DHCP

The DHCP is : Dynamic Host Configuration Protocol networking protocol used on standardized(DHCP) is a

(IP) networks for dynamically distributing Internet Protocolfor IP addressesnetwork configuration parameters, such as

interfaces and services

1- the first step open server manger , go to dash board , mange and add roles and fetchers .

then opened the add roles and fetchers wizard (before the begin) press next .

Then select installation type press next.

Then select server if you have more server , press next

Then select the roles and select DHCP, press next .

Then select fetchers if you want any fetchers and press next .

Then DHCP server press next .

Then confirm installation selections press install .

Finally installation progress press close .

Finally tank you for my lasting

This project by Jendan Hassan