Post on 07-Aug-2020
transcript
Jin ShaaMACHINES
Jin ShaaMACHINES
Portable Keyway Milling Machine
Jin ShaaMACHINES
Jin ShaaMACHINES
Cut a new full-depth 6 inch (152.4mm)keyway in less then 4 minutes.
The Jin Shaa JSM 304 Portable Key Mill is a simple, rugged,dependable machine tool designed to cut keyways in shaftswithout extensive dismantling. the automatically centeringV-base is quick and easy to set up. clamps on any shaft from50 - 300mm in diameter with the standard bar clamp.cuts stub-end keyways, or mid-shaft keyways orclamp the machine to a flat surface, and you can cut motor mount slots.
Compact rugged, portable millingmachine for on-site keyway and othermilling jobs.
Self-centering and self-aligning V-base
Needs only 1.5 inches (38.1 mm) or shaftfor clamping.
Clamps on shafts up to 300mmdiammeter with optionalchain clamp.
Slotted V-base allows you to cut right tothe end of the shaft.
Vertical and horizontal travel via handcrank.
Linear motion guide for accurate cutting action.
Standard Weldon-typs spindle accepts5/8 inch end mills, or 16mmshank endmills on metric machines.
Precision thread leadscrew withball bearings.
Zeroing-type vertical adjustment dialcalibrated to control cutter depth to 0.02mm per division
Sealed aluminum alloy gear box permitsoperation at any angle.
Precision ground quill housing ensuressmooth operation.
Stroke (slide travel) max 6.0 inches 150 mmVertical travel max
No load variable spinndle 1.75 inches 44.5 mmminimum 65 rpmmaximum 460 rpm
Spindle hole diameter 0.625 inches 15.9 mm
Maximum end mill diameter 1.25 inches 31.75 mm
Maximum shaft diameterstandard bar clamp 1.5 inches 60 mmwith optional shim kit 0.75 inches 19.1 mm
Minimum clamping space requiredon stub shaft 1.5 inches 38.1 mm
Power, electric 2V or 230V, 50-60Hz 1.25 kw 1.25 kw
SPECIFICATIONS
Jin Shaa MACHINES83/10 Rahul Apts, Law College Road, Erandwane Pune 411004Ph : 020-25434389 Cell no : 91 8975768613Email : jinshaa@yahoo.com / jinshaamachines@gmail.comWebsite : www.jinshaamachines.com / www.jinshaa.en.ec21.com
Horizontal stroke of 150mm
Vertical stroke of 70mm
Level bottle helps in precise vertical mounting to shaft
To see video of machine please visit our website atwww.jinshaa.en.ec21.com