Post on 22-Mar-2016
description
transcript
JPEG2000 OverviewBy L A Rønningen, Item, NTNU 2008
Presentation based on:
[4] Lecture notes on JPEG2000, by prof. M Fowler, Binghamton University, New York[3] Z. Li and M Drew, ”Fundamentals of Multimedia”, Pearson 2004[2] A. Skodras, C Christopoulos, and T Ebrahimi, ”The JPEG2000 Still Image Compression Standard. IEEE Signal Processing Magazine, 2001[1] D. Taubman and M. Barcellin, ”JPEG2000: Standard for Interactive Imaging. Proc of the IEEE, Vol 90, No 8, August 2002
Extend input sequence,Convolve with the twofilters, descard every other
Or use
Lifting filter
SNR
’1’’0’
Sample values from SQ Each sample can be truncated, one or more bits
Conceptual correspondence between the spatial and the bit stream representations
Image component
Tile
Precinct
Code blocks
Codestream
Layer – packets
from several resolution
levels
Packet -all code
blocks of a precinct
Coded Codeblock
Note: H stands for header
Packets and layers
Region of interest - ROI -Code important objects with higher quality than less important objects
Scaling quality of ROI by placing the samples inhigher bitplanes
To extract an arbitrarily shaped object, segmentation is needed. A rectangular bit mask, giving ’1’ for pixels insidethe object and ’0’ for pixels outside the object, can be applied