Post on 13-Apr-2018
transcript
TP-1934
Just say
to wood JigsN !
Stop Wasting Time!
Install Cabinet Hardware in Seconds.The days of measuring each door or drawer by hand or using a block of wood are over! Save time, save mistakes. True Position Hardware Jig makes short work of any hardware layout.Save hours of set-up time on handles and knobs. Simply adjust sliding brackets along the english & metric scale, tighten thumbscrews and drill! You will be amazed how easy hardware is to install!
Set hardware spacing using english/metric ruler
1
Adjust to desired location on styleand rail, then tighten thumbscrews
2
Hold in place and drill
3
Long Handles?
Easily center on any width of drawer front with included center notch.Centers hardware on drawer fronts up to 16” tall
TP:1934 T- Square w/ center bushing (2) Sliding drill guidesEnd stop, Top stop5mm drill bitCardboard case w/ handleTP:1935 Includes TP-1934(2) Extension bars w/ end stop5mm drill bitStop collar Cardboard case w handle
TP-1934Jig Body Material: Aircraft quality aluminumBushings: (3) 5mm case hardened steel, lifetime warrantyMax CC 12” (300mm)Style and Rail minimum width: 1/2”2.2 lbs
TP-1935Jig Body Material: Durable aircraft quality aluminumExtension bars: Alumunum with 32mm hole patternBushings: (27) 5mm case hardened steel, lifetime warrantyMax CC 29“ (700mm)Style and Rail minimum width: 1/2”3.5 lbs
SPECIFICATIONS
MADE IN
No Problem! TP-1935TP-1935
Includes: