K2I - Training, Supplier & Service

transcript

Office Address: Kompleks Ruko Lagoon 2, Blok J02 No. 12R Citra Raya – Cikupa, Tangerang 15710, Banten, Indonesia Telp. No. 62 21 29320828 / Fax. No. 62 21 29320827 Email: operation-admin@k2i.co.id , Website : www.k2i.co.id Page 1

COMPANY PROFILE

PT. KARSA KENCANA INDONESIA

TECHNICAL TESTING

INSPECTION SERVICES

LIST OF CONTENT

1. INTRODUCTION LETTER

2. POLICY STATEMENT

3. ORGANIZATION CHART

4. SCOPE & SERVICE

5. RESOURCES & EQUIPMENTS

6. LEGAL PAPERS

COMPANY INTRODUCTION

Established recently in June 2012, PT Karsa Kencana Indonesia is intended to provide trainings, man power r e c r ui t m e n t & equipment supply plus technical t e s t i n g and inspection services to the hydrocarbon/petrochemical industries, power plants and other general industries, in Indonesia and overseas.

PT. Karsa Kencana Indonesia is managed and supported by experienced professionals, with extensive experience in the required field and the company founders have actual hands on experience about the service offered, with history of work experience in and outside Indonesia.

Aware that customer satisfaction is of utmost priority, we will strive to provide the intended services above thoroughly and comprehensively, at reasonable and competitive cost.

As the new player in the industries, we open ourselves to others for mutually beneficial relationship while recognizing the need of being self independent and sufficient, to deliver safely and with quality, its ultimate goal i.e. client satisfaction.

POLICY STATEMENT

PT. Karsa Kencana Indo ne s ia will conduct its activities to ensure it meets applicable statutory laws and client’s standards/procedures/guidelines. It is our HSSE commitment to ensure all possible steps will be taken to prevent incidents and create a safe and healthy environment to all employees.

In the drive to achieve a safe and productive work force with healthy work environment, it is the company policy to enforce strictly the matter with regards to prohibited items i.e. the use/possession/sale of drugs, alcohol and other illegal substance by all employees, whilst on company businesses/locations and on client locations/work sites.

PT. Karsa Kencana Indonesia quality policy is to continually satisfy the expectation of the client. The primary objective is to provide professional services with effective and efficient strategies to the hydrocarbon/petrochemical industries, power plants & other general industries, by constantly monitoring, maintaining and improving the quality objectives set in company management system manual.

Signed,

Aria G.K., S.T., S.Sos. Chief Director

PT. K2I - ORGANIZATION CHART

Aria G.K

Chief Director/Company NDT L3

Abdul Haris

Operation Director/Company RAT L3

Ardian Antarja

Technical Advisor Wahid Hasim

Operation Coordinator

Andri Ferdinan

Technical Advisor

Sakuroh

Human Resource Administrator

Vacant

Sr. Logistic Support

Dhea Maharani K.

Office Administrator

Vacant

Logistic Support

Field Technicians/Inspector

Zildawaty S

Accounting / Tax Administrator

SCOPE & SERVICE

1. Trainings, Qualifications & Certifications are provided for: (SNT) NDT L1 & L2 in RT/UT/MT/PT/VT/ET methods.

API exam preparation course in 570, 510 & 653 methods

AWS exam preparation course – CAWI/CWI/SCWI

NACE Generalist Certification – Corrosion exam preparation

course

ISO, HSSE & Information technology system

2. Man power recruitment services: NDT & Rope Access (Abseil) Inspectors

Welding Inspectors

Coating/Painting Inspectors

Cathodic Protection Inspectors

Plant Inspectors

Engineers/Surveyors/Technicians, in various technical fields

3. Technical Inspection & Testing services: NDT Inspections

Welding, Coating / Painting & Cathodic Protection inspection work

Corrosion & Plant inspection including assessment/evaluation

Information technology system – design, installation,

modification & repair

Trainings, Qualifications & Certifications

NDT Level 1 & level 2

Non-destructive testing is used in the metal industry and science in order to evaluate the properties of a wide variety of material without causing damage or reducing the integrity of test material. Some of the common NDT techniques are Ultrasonic, Magnetic, Liquid Penetrant, Radiography, Eddy Current and Visual.

These courses meet the requirements of ASNT SNT-TC-1A to provides a thorough grounding in the principles of non-destructive testing and the fundamentals of engineering, materials and components, such that the technician will be able to:

• Identify the suitability of NDT method for all materials and inspection applications • Provide analysis of inspection data and documenting results of the analysis • Be familiar with regulatory codes and specifications with their intent.

NDT training courses are provided for the following:

Ultrasonic Test (UT) Magnetic Particle Test (MPT) Liquid Penetrant Test (LPT) Radiographic Film Interpreter (RFI) Visual Test (VT) Eddy Current Test (ECT)

API/AWS/NACE exam preparatory courses

These courses are very useful for personnel who like to extend themself to a better carrier in inspection field, it is intended for those who want to add expertise by having API / AWS / NACE certification. On these courses the participant will be given the knowledge of the important points and summaries to be learned from the API/AWS/NACE standards & codes, along with exercise examples of questions and troubleshooting tips that can increase participant’s chance of passing the exam level set by API / AWS / NACE .

Exam preparatory courses are provided for the following:

American Petroleum Institute ( API ): API 510 – Pressure Vessel Inspector, API 570 – Piping Inspector & API 653 – Above ground Storage Tank Inspector

American Welding Society (AWS) – Certified Associate Welding Inspector (CAWI), Certified Welding Inspector (CWI) & Senior Certified Welding Inspector (SCWI)

National Association of Corrosion Engineer (NACE) – Corrosion Technician, Corrosion Technologist & Senior Corrosion Technologist

TRAINING - ULTRASONIC TEST @ TNDT INSTITUTE (PT. K2I)

TRAININGS – MAGNETIC PARTICLE & LIQUID PENETRANT TEST

@ TNDT INSTITUTE (PT. K2I)

TRAININGS - RADiOGRAPHIC FILM INTERPRETER & VISUAL TEST

@ TNDT INSTITUTE (PT. K2I)

TRAINING - EDDY CURRENT TEST @ TNDT INSTITUTE (PT. K2I)

API 570 TRAINING @ TNDT INSTITUTE (PT. K2I) – June 2014

API 510 TRAINING – in Jakarta, May 2011

(@ Oil Institute)

API 570 TRAINING – in Batam, Nov. 2010

(@ Ladwer Institute)

RESOURCES & EQUIPMENTS A. Company Founders:

1. Aria G.K

Bachelor degree in mechanical engineering & business administration 25 years of work experience

Technical Qualifications: ASNT NDT Level 3 in RT/UT/MT/PT/VT/ET methods API 510/570/653 Inspector CSWIP 3.2 Sr. Welding Inspector with Radiographic interpretation BGas/CSWIP site Coating & Painting Gr.2 inspector

Past Qualifications: RBI L1 Engineer (Tischuk-UK) AWS Certified Welding Inspector CSWIP CP L1 Engineer Corrosion Inspector (Apitindo/MiGas Indonesia)

2. Abdul Haris

16 years of work experience

Technical Qualifications: Rope Access IRATA Level 3 Inspector (SNT) NDT Level 2 in UT/MT/PT/VT methods

3. Andri Ferdinan

Technical Qualifications: Rope Access IRATA Level 3 Inspector (SNT) NDT Level 2 in UT/MT/PT/VT methods

4. Ardian Antarja

Technical Qualifications: Rope Access IRATA Level 1 Inspector PCN UT level 2 – 3.1 & 3.2 methods (SNT) NDT Level 2 in RFI/UT/MT/PT/ECT/VT methods

B. Equipments :

1. Ultrasonic Test equipments

Krautkramer USK 6 Analog 1 unit

Krautkramer USK 7 Analog 3 units

Krautkramer USK 7B Analog 1 unit

DFD-20 Digital 1 unit

TUD-310 Digital 1 unit

UT Welded Specimen (various plate, pipe & T, K, Y welded joints)

2. Magnetic Particle Test equipments

Handy Magna DC Yoke 1 unit

Magnaflux AC Yoke 2 unit

Parker Permanent Magnet 1 unit

MPT welded Specimen (various plate, pipe & T welded joints)

3. Liquid Penetrant Test equipments

Red Dye, Cleaner, Developer available

LPT Welded Specimen (various plate, pipe & T welded joints)

4. Eddy Current equipments

Olympus Nortec 500D 1 unit

Olympus Nortec 600 1 unit

ECT Welded Specimen (various plate, pipe & T welded joints)

5. Radiography Film Interpreter equipments

Film Viewer 4 units

Radiography film specimen 2 sets

6. Visual Test equipment

Extech Video Borescope 1 unit

LEGAL PAPERS

A. Company license under Indonesian Industrial & Trade Ministry (SIUP)

B. Company license under Indonesian Man Power & Transmigration Ministry (Operational Licence)

C. Company domicile letter (SKDU)

D. Company registration number (TDP)

E. Company tax registration number (NPWP)

F. Company formation letter legalized by Indonesian Law and Human Rights Ministry

G. Company NDT L3 appointment letter

H. Company NDT L3 – ASNT Certificate

I. Trade mark registration – K2I T2IS , to Directorate General of Intellectual Rights (under Indonesian Law and Human Rights Ministry)

J. Trade mark registration – TNDT Institute, to Directorate General of Intellectual Rights (under Indonesian Law and Human Rights Ministry)

K. Company - ASNT membership

L. Registration acknowledgement from Indonesian Directorate General of

Oil & Gas (MIGAS)

A. Company license – under Indonesian Industrial & Trade Ministry (SIUP)

B. Company license – under Indonesian Man Power & Transmigration Ministry (Operational License)

C. Company domicile letter (SKDU)

D. Company registration number (TDP)

E. Company tax registration number (NPWP)

F. Company formation letter - legalized by Indonesian Law & Human Rights Ministry

G. Company NDT L3 Appointment Letter

H. Company NDT L3 – ASNT Certificate

I. Trade Mark Registration – K2I T2IS, to Directorate General of Intellectual Rights (under Indonesian Law and Human Rights Ministry)

J. Trade Mark Registration – TNDT Institute, to Directorate General of Intellectual Rights (under Indonesian Law and Human Rights Ministry)

K. Company – ASNT membership

L. Registration acknowledgement from Indonesian Directorate General of Oil & Gas (MIGAS)

K2I - Training, Supplier & Service

Documents