• Press onthenumerickeypad.• Press onthealpha/numerickeypad. ThedisplaywillshowPLU.• Press untilthedisplayshowsSEt.• Press PRT/* .ThedisplaywillshowSEt EntEr 0. • Press onthenumerickeypadandthenpress PRT/*

ThedisplaywillshowdAtE EntErandthecurrently programmeddate.Enterthedate(format:DDMMYY). Oncethedateisentered,thedisplayautomaticallygoes backtoSet.• Press C togobacktotheweighmode.

• Press onthenumerickeypad• Press onthealpha/numerickeypad ThedisplaywillshowPLU.• Press untilthedisplayshowsSEt.• Press PRT/* .ThedisplaywillshowSEt EntEr 0• Press onthenumerickeypadandthenpress PRT/*

• Enterthetime(format:HHMMSS).Thetimemust beenteredinthemilitarytimeformat(1:00PM= 1300,2:00PM=1400,etc).Thedisplaywill automaticallygobacktoSet.• Press C togobacktotheweighmode.

• Press onthenumerickeypad• Press onthealpha/numerickeypad•ThedisplaywillshowPLU.Press untilthe displayshowsSEt.• Press PRT/* .ThedisplaywillshowSEt EntEr 0• Press onthenumerickeypadandthenpress PRT/*

• Enterthenewdepartmentnumberandpressthe PRT/* . ThedisplaywillgobacktoSet.• Press C togobacktotheweighmode. NOTE:Thechangewillnottakeeffectuntilthescale isturnedoffandturnedbackon.

Programming the Date

Programming the Department Number

Programming the Time

• Date• Time• DepartmentNumber

• StoreName• HeadData• SpeedKeys

• TemporaryPriceChange

20090501

Quick Guide for Frequent Questions

LP-1000NLabel Printing Scale

Quick Reference

• Press onthenumerickeypad• Press onthealpha/numerickeypad ThedisplaywillshowPLU.• Press untilthedisplayshowsSEt.• Press PRT/* -thedisplaywillshowSEt EntEr 0• Press onthenumerickeypadandthenpress PRT/*

ThedisplaywillshowPmodeEntErand‘anumber’.• Press toallowatemporarypricechange.• Press PRT/* twice-thedisplaywillgobacktoSet.• Press C togobacktotheweighmode.

• Press onthenumerickeypad• Press onthealpha/numerickeypad ThedisplaywillshowPLU.• Press untilthedisplayshowsSHoP.• Press PRT/* .ThedisplaywillshowSHoP01.01 ThedisplaywillshownAmE01.01.Ifyoumake amistake,the keywilldeletethelastcharacteror C willdeleteallthecharacters.Thefirst01isline1

andthesecond01indicateshowmanycharactershave beenprogrammed.Youcanprogramupto28 characters.Toprogramline2,press or ,and thedisplaywillshowSHoP02.01.Youcanalso program28charactersonline2.• WhenfinishedprogrammingtheSHoP,press PRT/* ThedisplaywillshowSHoP.• Press C togobacktotheweighmode.

HeaddataappearsinplaceofthecommoditynamewhenprintinganonPLUitem(PLUwhichisnotprogrammed)• Press onthenumerickeypad• Press onthealpha/numerickeypad ThedisplaywillshowPLU.• Press untilthedisplayshowsHEAd.• Press PRT/* .Headdataistypicallyusedforasimplemessage,suchas

“ThankYou”onlineone,andthestorenameonlinetwo.Youcanprogramupto28charactersperline.ThedisplaywillshowHEAd01.01• Oncelineoneisprogrammed,press or togotoline2.• Whenfinishedprogramming,press PRT/* . ThedisplaywillshowHEAd.• Press C togobacktotheweighmode.

Programming for a Temporary Price Change

Programming Store Name

Programming Head Data

Programming Speed KeysBydefault,speedkey1isassignedtoPLU1,speedkey2toPLU2...speedkey54toPLU54.To assign a PLU to a speed key:• Press onthenumerickeypad• Press onthealpha/numerickeypad ThedisplaywillshowPLU.• Press untilthedisplayshowsPrSEt.• Press PRT/* . ThedisplaywillreadskEy0.• Pressthespeedkeythatyouwishtoprogramonthe

alphanumerickeypad.Ifforexample,youpress speedkey14thedisplaywillnowshowskEy1414. ToprogramPLUnumber100tothatspeedkey, keyin100.ThedisplaywillnowshowskEy14100. Press PRT/* andthedisplaywillgotoskEy0.• Ifyouwishtocontinueprogrammingspeedkeysrepeat thepreviousstep.Whenyouaredone,press PRT/* and thedisplaywillshowskEy0.Press PRT/* againand thedisplaywillshowPrSEt.• Press C togobacktotheweighmode.

20090501

Quick Reference Quick Guide for Frequent Questions • LP-1000N Label Printing Scale