Post on 01-Nov-2014
transcript
BEE1313 Instrumentation &
Measurements
Welcome
ومرهبا وسهال اهالبكم
Warm-up session…
Stand up…Take a deep breath…Simple exercise…
Objectives
At the end of this class, the studentsshould be able to explain the contents of
this course.should be able to put their expectation on
this class.should aware of the no of quizzes, tests
and assignments.should know a little bit detail about their
lecturer…
Introduction
R – Remember your goal.A – Always want to deliver the best.Z – do not Zzzz in my class.A – married, have A son and a doughterL – Live in taman Ukhuwah Pmtg Badak. I – I like to help students, but…
M– Malas biasanya membawa padah…U– Untuk berjaya, kena rajin lah…D– Datang awal ke kelas…A– “A always be my highest target”
Introduction to BEE1313
Faculty: FACULTY OF ELECTRICAL & ELECTRONICS ENGINEERING
Code: BEE 1313
Course : INSTRUMENTATION AND MEASUREMENTS
Credit : 3 Year : 1 Sem : 2
Lecture : 3hpw Tutorial : 0 Lab : 2hpw
Course Outcomes:At the end of this course, the students
should be able to:explain in detail about the working
principle of DC/ AC meters.discuss about the operation of electronic
oscilloscopes and signal generators.describe the working principles, operation
and applications of various sensors and transducers.
SynopsisThis course introduces the students to the:principles of instrumentation and
measurements.determination of error that caused by the
meters.architecture and the working principles of
DC/ AC meters, oscilloscopes and signal generators.
operation and applications of various sensors and transducers.
analogue signal conditioning.
Syllabus
Ch 01- Introduction to Instrumentation & Measurements [3 hrs]Principles of instrumentation and
measurementsError in measurementMeasurement standard and
calibration.
Ch02- DC Meters [6 hrs] Introduction to DC meters. d’Arsonval meter movement. DC Ammeter/ Voltmeter/
Ohmmeter. Loading effects. …
Syllabus
Ch03- AC Meters [6 hrs] Introduction to AC meters. d’ Arsonval meter movement
(half-wave/ full-wave rectification).
AC Ammeter/ Voltmeter/ Ohmmeter.
Loading effects.
Syllabus
Ch04- Oscilloscopes and signal generators [6hrs] Introduction to oscilloscope Architecture of oscilloscope Control functions of oscilloscope
Syllabus
Ch04- Oscilloscopes and signal generators [6hrs] (Cont…) Introduction to signal generator Architecture of signal generator Control functions of signal
generator
Syllabus
Ch05- Measuring devices (Electrical transducers) [4 hrs]
Definition of a transducer. Selecting a transducer. Basic electrical transducer
Resistive Position Transducer Capacitive Transducer Inductive Transducer LVDT Thermocouple Thermistor
Applications
Syllabus
Ch05- Measuring devices (Sensors) [8 hrs]
Pressure measurement.Deadweight Tester Fluid Head—Manometers. Mechanical Pressure Gauges Force-Summing Devices
Syllabus
Flow measurementDifferential pressure Positive displacement Coriolis Magnetic Ultrasonic
Syllabus
Temperature measurement RTDs Thermistors Thermocouples
Level measurement Magnetic Level Gauges Capacitance Transmitters Ultrasonic Level Transmitters Radar Level Transmitters
Syllabus
CH06 – Analogue signal conditioning [6hrs]
Introduction to signal conditioning Bridge circuits Amplifiers Protection Filters
Syllabus
Assessment
Quizzes 4X 2.5% 10%Tests 2X 12.5% 25%Laboratory 4X 3.75% 15%Assignments 2X 5% 10%Final 1X 40% 40%Total >>>>> 100 %
References
Larry D. Jones , A. Foster Chin, “Electronic Instruments and Measurements”, 2nd Edition,Prentice-Hall,1995
J. P. Holman, “Experimental Methods for Engineers”, 7th Edition, McGraw-Hill,2001
Curtis D. Johnson, “Process Control Instrumentation Technology”, 7th Edition, Prentice-Hall, 2004
Ground Rules in BEE1313
Attendance is Compulsory. Attire is formal. No sandals, jeans, round-
neck t-shirts, long-haired or long nails.Quizzes will be conducted “pop-quized”.
No Re-Quiz.Please inform me early if you have any
problems regarding anything of this class.
Summary
This course is quite tough… so the students must work hard to score good grades.
… …Distribute the
BEE1313 Subscription Form.
Q&A Session
Any questions…