Post on 18-Apr-2015
transcript
The future is greener than everProfessional LED lighting catalogue 2011
Professional LED Catalouge 20112 Unleashing new possibilities with LED 3
Index
Why LED?
Why Philips?
06. Sustainability
and LED solutions
12 Journey of
LED’s at philips
Office
applications
14. LEDs in Office
16. Reception
18. Open plan office
20. Office cabins
22. Meeting rooms
Case study
24. Audi meeting
room, Neckarsulm,
Germany
26. Arlanda airport,
Stockholm, Sweden
28. AB group,
Orzinuovi, Italy
30. Cognizant
technologies,
Bangalore - India
32. Product range
Retail
applications
40. LEDs in Retail
42. Shop windows
44. Entrances
46. Selling space
and displays
48. Instore
architecture
Case study
50. Bio-Planet,
Leuven, Belgium
52. Fussl fashion,
Vienna, Austria
54. Heineken the
city, Amsterdam, The
Netherlands
56. Mcdonalds - India
58. Product range
Outdoor
applications
64. LEDs in
Outdoor
Applications
66. Architectural
lighting
68. City centres
70. Residential areas
72. Roads and
Transport
Case study
74. BP the
Netherlands, Tilburg,
the Netherlands
76. City centre,
Terneuzen, The
Netherlands
78. City hall,
Vilvoorde, Belgium
80. Kolkata municipal
corporation office -
India
82. Product range
Hospitality
applications
96. LEDs in
Hospitality
Applications
98. Receptions and
lobbies
100. Corridors and
other transition areas
102. Luxury rooms
and suites
104. Bar, restaurants
and lounges
106. Wellness areas
108. Facades
110. Product range
Case study
114. Scandic Palace
hotel, Copenhagen,
DK
116. The Westin
palace, Madrid, Spain
118. CitizenM
Amsterdam, The
Neatherlands
LED lighting
innovation
Case study
122. County hall,
London, UK
124. Gateshead
millennium bridge,
Newcastle, UK
126. PUB
departmental store,
Stockholm, Sweden
128. Asian paints,
experience colour
store, Mumbai - India
130. Product range
132. LED Lamps
Case studies
134. Design agency
Reggs, Amsterdam,
The Neatherlands
136. Product range
Professional LED Catalouge 20114 Unleashing new possibilities with LED 5
What are LEDs? How do LEDs work? What’s so different?An LED is an light emitting diode. Its light is produced by
an electrical current passing through a semi conductive
material, so it does not require a filament like an
incandescent bulb.
LEDs have advanced at remarkable rates to enable an
entirely new category of lighting that will bring sense
and simplicity to our everyday lighting.LED lighting is
highly efficient, long lasting, environmentally friendly and
inherently controllable - enabling both new and traditional
applications of light. Already LED based solutions
illuminate famous buildings, bridges, retail shops, television
studios, theatre stages, hotels, casinos, hospitals, restaurants
and celebrity-filled nightclubs arround the world.
LEDs produce light in a very unique way; they produce light
via a process called Electro-luminescence, a rather complex
process that starts by turning a semi conductor material into
a conducting material. A semiconductor with extra electrons is
called N-type (negative) material, since it has extra negatively-
charged electrons. In N-type material, free electrons can move
from a negatively-charged area to a positively charged area.
A semiconductor with extra holes is called P-type (positive)
material since it has extra positively-charged gaps called holes.
When excited with current the negative electron leaves its
atom and the P-type material’s positive attraction draws the
free negative electron into its hole, and the hole also moves
toward the electron, so on and so forth. As an electron travels
to a hole, it carries energy, but in order to fit into the hole it
must release any extra energy, and when it does, the extra
energy is released in the form of light. When we maintain a
steady flow of electrical current to the diode, it continues
the process of allowing electrons to flow from the negative
charged material and fall into the positive charged holes
which maintains a steady stream of light out of the LED.
LEDs consume less electric power. A LED bulb utilizes around
10 watts of energy that was confirmed 10 times less space-
consuming than an incandescent bulb which utilizes up to 100
watts of electricity. The lengthy hours of usage and also energy-
saving functions of LEDs will definitely support you save more
when compared with continually buying other inexpensive
light bulbs that have shorter life span and also have no energy-
saving functions.
Durability is another feature of LED lighting. They don’t have
glass tubes that may break and also trigger injury. They are
also made making use of materials that do not generate toxic
chemicals like that of incandescent and also fluorescent bulbs
Lastly, LED lighting are made to generate pure light without
flickers and glares.
Professional LED Catalouge 20116 Unleashing new possibilities with LED 7
Sustainability and LED solutions
Sustainability and respect for the environment are core values
of Philips. And with LED based solutions, we take a major
step forward in achieving both aims. When considering the
sustainability of LEDs, the first aspect that generally springs
to mind is low energy use. But there are plenty of others,
including waste reduction, recyclability, the use of materials &
resources and the effect on building and design practices.
Professional LED Catalouge 20118 Unleashing new possibilities with LED 9
Unleashing new possibilities with LED
Professional LED Catalouge 201110 Unleashing new possibilities with LED 11
1. Like all light sources, LED sources slowly fade over time. This light
output degradation, or lumen depreciation, is determined by testing
LED sources over a period of 6,000 hours or more. Factors that can
cause lumen depreciation include drive current and heat generated
within the device itself. Lumen maintenance describes how long a
lighting fixture retains a certain percentage of its initial light output.
White light sources used for general illumination are commonly
considered to be at the end of their useful life when their light output
falls below 70% of initial output. For white and colored accent and
non-task lighting, the lumen maintenance threshold is often considered
to be 50%. Well-designed LED lighting fixtures can retain 70% of their
initial output for 50,000 hours or more, depending on operating
conditions and other factors. At 24 hours per day of continuous use,
such fixtures can deliver useful light for six years or longer — many
times as long as incandescent sources, and up to twice as long as long-
life fluorescent sources.
2. If you compare the raw lumen output of conventional lamps with
the lumen output of many LED lighting fixtures, it often seems that
LED fixtures deliver less light than the conventional alternatives. Such
comparisons, however, are inaccurate and misleading, as they fail to
account for the significant amount of wasted light in conventional
lighting solutions. Simply put, lumen output is a poor measure of the
suitability of a lighting fixture for a given task. A better measure is
delivered light — how much light a fixture delivers to a surface or
area, as measured in lux (lx) or footcandles (fc). You can make accurate
comparisons between conventional and LED lighting fixtures on the
basis of delivered light, as it measures how much of a light source’s
raw lumen output reaches a surface or area you want to illuminate.
To determine how much of a conventional lamp’s raw lumen output
reaches a task area, you must discount any light lost in the fixture
housing (often over 30%), as well as any light lost as a result of lensing,
shading, and filtering. Since incandescent and fluorescent lamps emit
light in all directions, you must further discount any light emitted in a
direction away from the target area.
LED lighting fixtures are integrated systems in which the light
sources (LEDs), the fixture housing, and the primary optics are
inseparable. Lumen measurements of LED lighting fixtures, therefore,
are performed on the entire system, and already account for light
lost to the fixture housing and lensing. Furthermore, since LEDs are
inherently directional, they emit almost all of their light output in the
desired direction, rather than dispersing it in all directions. And since
LEDs natively produce intensely saturated colored light, they require
no gels or filters which can block a significant percentage of a fixture’s
light output (over 90% for certain shades of deep blue).
When comparing lighting fixtures on the basis of delivered light, LED
fixtures often perform as well, and in some cases significantly better,
than conventional fixtures, while consuming far less energy.
3. Many manufacturers test their LED chips on lab benches at room
temperature with short pulses that produce a high efficacy that cannot
be achieved in practical use. While these results are not incorrect, they
do not reflect the typical expected output of LED sources integrated
into lighting fixtures. Although percentages vary, it is not uncommon
to see efficacy losses of up to 40%.
Reputable LED fixture manufacturers do not base lumen
measurements on the test results of their LED source suppliers.
Instead, they use independent, third-party testing labs to measure
and validate the output of their lighting fixtures according to test
conditions spelled out in the LM-79 standard, published in 2008 by the
Illuminating Engineering Society of North America (IES).
Some highly efficient white-light LED lighting fixtures can achieve
efficacy of over 40 lumens per watt (lm / W), sufficient to earn
ENERGY STAR and other energy-efficiency ratings. For example,
linear LED cove lights from a leading manufacturer achieve efficacies
of 43.9 to 53.1 lm / W in normal operating conditions.
4. Because of incandescent light bulbs, you’re probably used to looking
at wattage to determine the light output of a light source: a 100-
watt lamp puts out more light than a 60-watt lamp. The fact is that
incandescent lamps have a very low efficacy compared with CFLs,
high-output fluorescent lamps, and LED light sources. All general
service incandescent lamps use the same filament material heated
to the same temperature, the only way to increase their light output
is to increase the wattage. This is one of the main reasons why
incandescent lamps are so energy wasteful. LED sources are much
more efficient at converting watts to lumens. Different materials
can be used within the LED sources themselves, each of which has
its own light extraction efficacy. For these and other reasons, two
different LED sources can consume the same number of watts but
differ widely in lumen output. Because watts can’t be used as an index
of light output, evaluating the “brightness” of LED sources for a given
situation requires you to think differently about lighting. A standard
60-watt incandescent lamp emits a total of about 800 lumens, but the
light is emitted equally in all directions. When you’re reading at your
office desk, your book does not receive all 800 lumens from your
desktop lamp, nor do you need it to. As described in Myth #2, the
crucial measurement is delivered light. According to the IES, serious
reading requires an average of 50 fc or 500 lx on the page. Many
linear LED under-cabinet fixtures and other task lights can deliver this
Choosing the right LED solutionAvoiding common misconceptions about LED sources and fixtures
level of light while consuming far less than 60 watts. For example, an
under-cabinet LED light from a leading supplier delivers 50 fc in typical
desktop situations while consuming only about 6 watts per foot.
5. Because they produce no infrared energy, the beam of light from
an LED source is cool. However, waste heat is produced within the
LED itself during the conversion of electricity into light. This waste
heat must be properly removed from the lighting system to maximize
fixture performance and to avoid damage to the LEDs. In well-
designed LED lighting fixtures, heat removal is accomplished through
carefully designed and engineered heat sinks that draw heat away from
the LEDs and dissipate it into the air surrounding the fixture housing.
6. Initial fixture costs may be higher for some LED lighting solutions
than for comparable incandescent and fluorescent lighting solutions.
But initial fixture cost does not account for the total cost of owning,
operating, and maintaining a lighting system. Because of their long
useful life, LED lighting fixtures avoid the maintenance and materials
costs which multiple relampings of incandescent fixtures require over
tens of thousands of hours of operation. And because LEDs consume
far less energy, annual power costs can be reduced by up to 80%.. The
total cost of LED lighting systems, therefore, can be significantly lower
than conventional systems. In fact, payback on LED lighting solutions
can often be realized in less than three years.
7. Two important measurements of white light quality are correlated
color temperature (CCT) and color rendering index (CRI). CCT
describes whether white light appears warm (reddish), neutral,
or cool (bluish). The standard definitions of CCT allow a range of
variation in color that can be readily discerned by viewers even when
the CCT value is the same. Ensuring color consistency, therefore,
is a major concern of LED manufacturers. Leading LED lighting
manufacturers use various LED selection schemes (binning) to ensure
color consistency from fixture to fixture. On a scale of 0 (worst) to
100 (best), CRI measures the ability of a light source to reproduce
the colors of objects faithfully in reference to an ideal light source
— the sun, for example, or an incandescent lamp. Most office, retail,
educational, medical, and residential spaces require a minimum CRI of
70 – 90. Many white-light LED lighting fixtures available today achieve
CRIs of 80 or better, comparable to many CFL lamps, quartz metal
halide lamps, and some cool white fluorescent fixtures sufficient for
the vast majority of applications.
Because of well-known shortcomings of the standard CRI test
for LED lighting, some LED lighting fixtures with low CRI scores
produce visually pleasing light that renders colors appropriately. Color
Quality Scale (CQS), a color-rendering standard that better accounts
for the unique properties of LED light sources, is currently under
development. Until CQS or a similar alternative is in place, you should
observe LED sources with low CRI scores in person to evaluate how
well they render color.
Efficacy of LED Sources
• LED sources far surpass incandescent lamps in efficacy and compare favorably with most fluorescent lamps.
• Highest efficacy in reds and coolest whites — 5000K and above.
Comparing LED and ConventionalLight Fixture EfficacyThis table shows the starting efficacy of various fixtures, percentage of light loss, and net efficacy
The LED downlight has the lowest starting efficacy, but its net efficacy exceeds the asymmetric linear fluorescent and
equals the CFL downlight.
Fixture Starting Efficacy Losses Net Efficacy
Asymmetric TL Wall Wash 80 Im / W 62% 30 Im / W
Recessed CFL Downlight 72 Im / W 47% 34 Im / W
Surface-Mounted LED Downlight 66 Im / W 49% 34 Im / W
Indirect TL Troffer 68 Im / W 25% 51 Im / W
Direct / Indirect TL Pendant 74 Im / W 20% 59 Im / W
Professional LED Catalouge 201112 Unleashing new possibilities with LED 13
Journey of LEDs at Philips
PCB ocular inspection Thermal testing
LED drivers and solar charge controller development lab
Luminaire research and design centre The brightest brains in the country work together on the latest technology and platforms to develop the most optimised solution for the customer using the latest design software and analysis tools. The design centre is equipped with the state of the art measurement, simulation and validation facility to check the designs, prototypes, all safety and protection parameters and finally the finished products at each and every step from conceptualisation to delivery.
LED drivers and solar charge controller development labThe lab is fully equipped for CE compliance testing of
electronic drivers and solar charge controllers for LED
modules. Testing facilities incorporate all IEC standards
defined for Solar and LED drivers and controls. Test facilities
and equipments to monitor performance, safety, surge, EMI-
EMC, thermal management, solar panel simulators etc. are
used by the team of highly skilled professionals to deliver the
best product in the industry.
Photometric lab
Gonio-photometer in the Photometric lab
Thermal and electrical lab Luminaires are tested here as per IEC and IS standards. Fully
equipped to conduct tests for thermal, endurance, high voltage
and insulation resistance, heat-fire-tracking, electrical performance
measurement, switching cycle tests. This lab is instrumental for
endorsement of product quality.
Photometry lab State of art facility (probably the biggest lab in Asia) for
Photometric measurements using rotating mirror type
Gonio-photometer. It is used to measure the light distribution
of luminaires in a 3-Dimensional space. The measurements
may be used to derive photometric characteristics and is
transformed for publication in graphical form such as polar
curve. This is the most appropriate type of Gonio-photometer
for measuring LED Luminaires with more than 98% accuracy.
Thermal and electrical labRain chamberDust testing
Dust ingress and water ingress facilityIP66 marking on luminaires imply ingress protection from
dust and moisture which is very important to ensure
constant quality of light output. All products are rigorously
tested for protection against dust and water, followed
by electrical safety tests viz. High voltage and insulation
resistance. The facility covers entire range of ingress
protection and is instrumental for customer acceptance tests.
Professional LED Catalouge 201114 Unleashing new possibilities with LED 15
Philips is pioneering the LED lighting revolution. For the first time ever we offer a complete portfolio of LED lighting
solutions, including lamps, luminaires and controls. They encompass solutions for general lighting and task lighting, so
everyone from the boardroom to the back office can benefit from energy efficient, extremely adaptable light with high
levels of visual comfort.
LEDs in OfficeApplications: Reception, Open plan office, Office cabins, Meeting rooms
The office of the future
Specifically designed to meet the needs of people in
offices, our new portfolio makes a serious statement
about innovation, design and sustainability. It gives you
the opportunity to seize the moment and help shape
the office of the future, at the same time as creating
comfortable office spaces that are a pleasure to work in.
Creative freedom
As the global market leader in lighting, Philips is at the
cutting edge of innovation and design. Nowhere is this
more apparent than in LED lighting. The very nature
of LEDs offers so much more scope for new ideas and
their compact size means even more creative freedom in
luminaire design. What’s more, because they’re electronic
devices you can control them with great precision to
create exactly the right ambience to suit needs, moods
or tasks.
Design innovation
Not surprisingly, all this creative freedom has spawned
a new wave of office lighting solutions. For example, our
DayWave concept, with its graceful curves, adds more
than a touch of elegance to any office. New concepts
such as DaySign and DayZone extend the possibilities
even further, while the Touched range of controls brings
consumer style ease of use to the workplace.
Green-light thinking
Our new complete portfolio has also given the green light
to sustainability and an explicit ‘GO’ to energy saving of up
to 85%. Our LED lamps and luminaires set new standards
in watts consumed per square meter, especially when
combined with our lighting controls. Compliant with all
office norms, LEDs also eliminate the need for hazardous
substances and because they are designed to last up to
three times longer, they create even more savings in terms
of maintenance.
The perfect portfolio
Offices require more than just illumination. They need
creative lighting solutions that inspire ideas and make a
statement, improve well-being and safeguard our precious
resources. Our LED portfolio does exactly that with
stylish solutions for every workplace application. A truly
sustainable way to improve life in the office, without
harming life on the planet.
Professional LED Catalouge 201116 Unleashing new possibilities with LED 17
ReceptionLight has the power to set the mood from the moment visitors walk into your reception. Our LED
solutions are beautifully designed to create the most dramatic effects from undulating waves of light
to crystal clear accents and soft, colourful ambiences. Whether your office style is funky or functional,
we have the right LED solutions. LuxSpace
Page 58
DayWave
Page 38
Powerbalance
Page 36
Professional LED Catalouge 201118 Unleashing new possibilities with LED 19
Open plan officeOpen plan offices are now far more dynamic. We believe that office lighting should be too. Create
a comfortable ambience that responds to natural light levels, switch lights off automatically when
they’re not needed. With our smart solutions it’s easy to create the most inspiring light effects
without compromising whatsoever on the quality of light. And because they’re designed to be highly-
efficient, they’ll even make your energy bills look good. DayZone
Page 35
Quadra 1
Page 32
DayWave
Page 38
Professional LED Catalouge 201120 Unleashing new possibilities with LED 21
Office CabinsCell offices and internal rooms that lack natural light require lighting more often and that can mean
high energy costs. Our intelligent solutions can bring them right down with luminaires that react to
natural light, lighting controls* that glow on approach and sensors* that switch lights off when no
one’s around. So you can work smarter and save up to 55% on energy costs. Powerbalance
Page 36
DayZone
Page 35
Quadra 1
Page 32
*For more information on controls and sensors please visit http://www.lighting.philips.com
Professional LED Catalouge 201122 Unleashing new possibilities with LED 23
Meeting roomsLighting has a profound effect on the way people feel. Tailor it to the task at hand and you can make
your meeting room a far more effective space, enhancing wellbeing, creating excitement or providing
an air of quiet calm. Our innovative solutions take LED lighting to new levels of sophistication. The
clever features bring out the best in your meeting room and the people who use it.GreenSpace
Page 59
Ledo
Page 34
Master LED Spot
Page 137
DayWave
Page 38
Professional LED Catalouge 201124 Unleashing new possibilities with LED 25
Audi meeting roomNeckarsulm, Germany
“Everyone who walks past the redesigned room admires the lighting, with many of them remarking: I wish I had something like that!”
- Bernhard Schneider, Head of Planning Department
The Project Audi has been writing automotive history for over 100 years. Many of their hallmark innovations have
been developed and now roll off the assembly line at their location in Neckarsulm. As a global player, Audi
is continuously optimising environmental factors such as energy, waste balances, soil conservation, water
pollution and noise emissions. In 2008 they decided to renovate their building to create modern offices
with state-of-the-art facilities. An especially attractive solution was required for their meeting facilities.
The SolutionDayWave was chosen for its elegantly curved design and linear form that creates an attractive wave of light.
The LED technology illuminates the room in various shades of warm and cool white light, to create exactly
the right ambience for each meeting and the luminaire also ensures it does it in style. The attractive design
with aluminium housing is also a perfect match with the Audi brand in a visual sense.
Case study
LuxSpace
Page 58
DayWave
Page 38
Professional LED Catalouge 201126 Unleashing new possibilities with LED 27
Arlanda airportStockholm, Sweden
“Our energy consumption is now half what it used to be and maintenance costs have decreased significantly.”
- Lars-Olof Nilsson, Business Development Officer
The Project The Swedish Civil Aviation Administration (LFV), the owner of Arlanda, is intending to install maintenance-
free lighting in large areas of the airport. Following a successful test with LEDs, Arlanda is the first airport
in Europe to have LuxSpace light fittings installed – Philips’ LED light fitting for general lighting. For Arlanda
Energi, a division of LFV, the installation of LuxSpace is an important measure for saving energy and reducing
maintenance costs for lighting. Arlanda Stockholm, the largest airport in Sweden, consumes approximately
the same amount of energy as an average small Swedish town. The day and night illumination of the lighting
results in high energy consumption.
In the past at Arlanda, it was costing as much to replace the bulb as the fitting and bulb put together. The
bulbs are in most cases difficult to access e.g. situated in escalators or high on the ceiling or in other
difficult to access locations. Maintenance personnel had to use special scaffolding in order to reach the high
ceilings, with the consequence that the escalators had to be temporarily disabled during maintenance. This
was the reason why Arlanda Energi switched to LED lighting. The long lifecycle of LED lighting yields great
savings in maintenance costs. LED’s also contribute to extremely low energy consumption.
The SolutionLuxSpace makes it possible to achieve extremely low energy consumption in public spaces whilst
preserving light quality. LuxSpace also allows an even distribution of light, stable light yield and good
colour reproduction. In the first phase the test project involved 50 light fittings in corridors, escalators
and toilet facilities close to baggage handling. LuxSpace is the first Philips installation to be used in such an
environment. It did not take long for positives results to be apparent: “Our energy consumption is now half
what it used to be and maintenance costs have decreased significantly,” says Lars-Olof Nilsson, Business
Development Officer for Arlanda Energi.
“Since the installation in March 2009 everything has gone very well. If the LED’s live up to their lifecycle of
50,000 hours, we should be able to install LuxSpace in several locations in Arlanda,” according to Nilsson.
The benefits
In addition to low maintenance costs and low energy consumption, great benefit of LEDs is that they can
be turned on and off very quickly, compared to standard metal halogen bulbs. Another benefit of LEDs is
that they do not contain any heavy metals. LuxSpace offers the opportunity for the use of motion sensors
which can further reduce energy consumption.“At an airport like Arlanda, it is not necessary for all areas to
be illuminated day and night. The Philips intelligent control and motion sensor detection system offers many
opportunities to save even more energy. We have not yet decided whether to install this solution, but we
are certainly interested in the technology,” says Nilsson.
Case study
LuxSpace
Page 58
Professional LED Catalouge 201128 Unleashing new possibilities with LED 29
AB GroupOrzinuovi, Italy
“We looked for an advanced solution that ensured a level of comfort for people working in the offices, as well as optimum management of energy resources.”
- Marco Baronchelli, Technical Manager, AB Group
The Project Founded in 1981 by Angelo Baronchelli, the AB Group is Italy’s leading company in the design and
installation of plants for the co-generation and self-generation of power from renewable sources. The group
hasalways been passionate about energy efficiency and eco-sustainability, something which is at the heart
of everything they do. So when plans for their new engineering site were drawn up, it was clear that the
technology used to light it would have to form part of this meticulous attention to energy efficiency.
The AB engineering hub is designed to house around 100 engineers, technicians and sector specialists,
making it the largest nerve centre for co-generation in Europe. From a lighting perspective it presented
three challenges. Firstly, the spaces had to be lit in an intelligent manner without having to make use of
natural light. Secondly, the solution had to provide comfortable light levels for employees working in the
offices. And finally, excellent management of energy resources with no waste was of paramount importance.
The SolutionPhilips innovative LED lighting technology was more than able to meet all three conditions. DayZone
provides high-quality lighting with impressive visual comfort and glare control and colour consistency that
are compliant with all office norms. LuxSpace features the latest LED technology and delivers consistent
light output and high colour rendering. Not only do these two innovative solutions have a captivating,
modern design, they also provide guaranteed energy saving, long-lasting components and no harmful
substances such as mercury. What’s more, they enable the AB Group to manage all the lighting by means of
a single system, something that proved to be the deciding factor in choosing Philips.
The benefits
With a lifetime of 50,000 hours at a minimum flux of 70% DayZone and LuxSpace outperform traditional
fluorescent systems and can reduce maintenance costs by as much as 70%. Based on average hours of
use within a typical building, they could provide illumination at AB’s engineering hub for the next 15 years.
The intelligent control system also enables further savings to be made. Daylight harvesting and presence
detection switch lights off when there is enough natural light or when an office is not in use. What’s more,
because the solution provides the best possible levels of visual comfort in terms of colour temperatures
and light intensity, it has also improved well-being for everyone working in the offices. Thanks to Philips, the
AB Group now has a state-of-the-art solution that showsits eco-credentials in the best possible light.
Case study
DayZone
Page 35
LuxSpace
Page 58
Professional LED Catalouge 201130 Unleashing new possibilities with LED 31
Cognizant TechnologiesBangalore, India
“When Cognizant wanted to build its new office in a cost effective and forward thinking manner, Philips provided LED lighting solution that is energy efficient and flexible and enhances light output at the same time.”- CS Murali, Chief of Corporate Affairs, Cognizant Technologies - India
The Project Cognizant (NASDAQ: CTSH) is a leading provider of information technology, consulting, and business
process outsourcing services, dedicated to helping the world’s leading companies build stronger businesses.
Headquartered in Teaneck, New Jersey (U.S.), Cognizant combines a passion for client satisfaction,
technology innovation, deep industry and business process expertise, and a global, collaborative workforce
that embodies the future of work. With over 50 delivery centers worldwide and approximately 111,000
employees as of March 31, 2011, Cognizant is a member of the NASDAQ-100, the S&P 500, the Forbes
Global 2000, and the Fortune 500 and is ranked among the top-performing and fastest growing companies
in the world.
The SolutionSaving energy is a very important area in the corporate social responsibility program at Cognizant. Given
the nature of its businesses wherein it has large offices and large number of people working, office lighting
is a very large element of energy consumption. Hence, it was important to look for a solution which saves
lighting cost and at the same time was very efficient, flexible and also easy to upgrade and maintain. Philips
LEDO LED down lighters have been used.
Case study
Ledo
Page 34
Professional LED Catalouge 201132 Unleashing new possibilities with LED 33
Specifications
Type Quadra1 QuadraII
Light source LUXEON REBEL 2 x LLM-1800
Lumen output 3000lm 2650lm
Light color Neutral white: 4000KCool white: 5000K
Neutral white: 4000K
Power consumption 60W 50W
Voltage 220V-240V AC 50Hz 220V-240V AC 50Hz
Driver Integral Constant Current Driver Integral Constant Current Driver
Optics High Efficiency low glare optics High Efficiency low glare optics
Material Powder Coated CRCA Housing with High reflectivity white optics along with high efficient milky diffuser. Extruded aluminum housing for surface mounted option
Powder Coated CRCA Housing with High reflectivity white optics along with high efficient milky diffuser
Color White,Grey for surface mounted version White
Lifetime 50000 burning Hrs. (At L70) 50000 Burning Hrs. (At L70)
CRI >80 >80
Version Surface/Recessed Recessed
Quadra I andQuadra II
General descriptionPhilips QUADRA family is a 2x2 office luminaire series with high efficacy and low power consumption suitable for office
lighting applications. QUADRA is suitable to replace 2x36 W direct-indirect conventional office luminaires enabling upto
25% energy savings. It has unique aesthetic design and has latest LED technology which delivers consistent light output,
stable color performance and high color rendering.
Product Specifications
Cirrus
General descriptionPhilips Cirrus is an LED office General Lighting Solutions which offers excellent energy saving and maintenance free operation.
The luminaire has a slim design which is suitable for recessed mounted application for office Spaces. Powered by Long lasting
LED light source and high efficiency optical system the luminaire offers a uniform and uninterrupted Lighting.
Specifications
Type CIRRUS
Light source LED’s
Lumen output 2000lm
Light color Neutral White -4000K
Power consumption 32W
Voltage 220-240V AC 50 Hz
Driver Constant Current Driver
Optics High Efficiency Powder Coated refletors and High Transitivity Opal Diffuser Cover
Material Powder Coated CRCA housing CRCA Front Frame.
Color Grey / white
CRI >80
Professional LED Catalouge 201134 Unleashing new possibilities with LED 35
Dayzone
General descriptionDayZone, recessed LED luminaire, delivers high-quality functional lighting with an energy efficiency that matches or even
outperforms traditional fluorescent systems. It offers impressive visual comfort, striking appearance and light effect. Glare
control and color consistency are compliant with future office norms.
Specifications
Type BBS560
Ceiling type Exposed and symmetrical concealed T-bar ceiling and plaster (board) ceiling
Lumen output LED2000 (2000lm out of system)LED3500 (3500lm out of system)
Light color Warm white 3000KNeutral white 4000K
Power consumption 40W/65W
Voltage 240V / 50Hz
Optical cover OLC micro-lens optic made of polycarbonate (PC-MLO)
Options Emergency lighting (integrated): 3 hours (EL3)Lighting controls: Actilume multi-controller (ACL)Compatible with DALI (only relating to dimmable driver PSD)
Material Housing: Zink-coated steelRim: post lacquered, white RAL9016 basedOptical Cover: PC-MLO polycarbonate
Lifetime 50,000 burning hrs. (At L70)
CRI >80
Product Specifications
Ledo andLedo Plus
General descriptionThe highly energy efficient LEDO & LEDO Plus makes it possible to create a great lighting experience with extremely
low power consumption in general lighting applications. It enables upto 50% energy saving compared to conventional CFL
downlighters. LEDO family uses latest LED technology and delivers consistent light output, stable color performance and
high color rendering.
Specifications
Type LEDO LEDO Plus
Light source DLM-1100 DLM-2000
Lumen output 1100lm 2000lm
Light color Neutral white: 4000KCool white: 5000K
Neutral white: 4000K
Power consumption 18W 32W
Voltage 220V-240V AC 50Hz 220V-240V AC 50Hz
Driver Constant current driver integrated in separate box Constant current driver integrated in separate box
Optics Sand-blasted matt finish reflector Sand-blasted matt finish reflector
Material Die-Cast housing acting as heat sink, detachable front frame made from high quality engineering plastic
Die-Cast housing acting as heat sink, detachable front frame made from high quality engineering plastic
Color White White
Lifetime 50000 burning hrs. (At L70) 50000 burning hrs. (At L70)
CRI >80 >80
Variant
Also used in
Retail
Professional LED Catalouge 201136 Unleashing new possibilities with LED 37
Powerbalance
General descriptionPowerbalance is a premium LED luminaire which offers comfortable working environment and at the same time complies
with office lighting norms. It consumes significantly less energy while offering longer life of the light source, resulting in
lower operational cost compared to traditional luminaires.
Specifications
Type Power Balance
Light source LED 34S , LED 24S
Lumen output 3100lm4000lm
Light color Neutral white: 4000K
Power consumption 38W/50W
Voltage 220V-240V AC 50Hz
Driver Philips - Xitanimum High Voltage Driver
Optics Smart Pyramid optics made out of Anti-Static Plastic Reflector with diffuser
Material CRCA Housing with Metal Rim with anti-static Plastic reflector (Extreme high Reflectivity)
Color White
Lifetime 50000 burning hrs. (At L70)
CRI >85
GreenLED
General descriptionGreenLED is a breakthrough offering which combines modern product design, the latest LED technology and reliable heat
management to deliver a long lasting efficient and cost effective solution for offices and retail spaces. Offering substantial
energy savings compared to CFL/ halogen, good light quality, complete stylistic freedom and significant maintenance savings,
the product is an ideal value for money replacement for conventional CFL options.
Specifications
Type BBS170
Light source High Power LED’s
Lumen output 850lm
Light color 5000K/4000K
Power consumption 15W
Voltage 170-270V AC 50 Hz
Optics High Efficiency optics with high reflective diffuser providing efficient glare free lighting
Driver Non-integral Constant Current Electronic Driver with a Gear Tray
Color White
Lifetime 40000 burning hrs. (At L70)
Product Specifications
Variant
Also used in
Retail
Professional LED Catalouge 201138 Unleashing new possibilities with LED 39
Daywave
General descriptionPhilips DayWave represents a milestone in the design of office luminaires that makes your office really stand out. DayWave
is designed for an inspirational environment that is pleasant to work in as well as to enhance well-being and performance.
The natural rhythm of the waves of light can be combined flexibly to suit a variety of office spaces.
An intuitive lighting control enables office users to adjust light output and tone to their personal taste.
Product Specifications
Specifications
Dynamic BPS800 Mono Color BPS800
Light source Warm white/Cool whiteVersion: 2x96xLED-HP
Neutral white version:96xLED-HPWarm white version:96xLED-HP
Light color 3000-5500K (3000-5500) Warm white: 3000K (3000)
Neutral white: 4000K
(4000), on request
Indirect blue light (BLL)Note: indirect blue light can only be used when the white light is switched off
Luminous flux Acrylic cover(AC-MLO):
3400lm(3000K)
4450lm(4000K)
4300lm(5500K)
Polycarbonate cover(PC-MLO):
3800lm(3000K)
4900lm(4000K)
4750lm(5500K)
Acrylic cover(AC-MLO):
3400lm(3000K)
3950lm(4000K)
Polycarbonate cover(PC-MLO):
3800lm(3000K)
4400lm(4000K)
Power requirement 100~240V AC, 50~60Hz
130W (luminaire without supply unit)
Optics Micro-lense optic (MLO)
Installation Suspended: Individual or in line
Suspended mounting with a set of two suspension tubes,
150cm per luminaire (can be sawn to right length on site)
Material Housing: Extruded anodised aluminium, finishing brushed (BRU),
polished (POL) or white (WH)
End-caps and suspension tubes: Extruded anodised aluminium finishing brushed with polished
front end (BRU), polished (POL) or white (WH)
Cover: Acrylic (AC-MLO) or polycarbonate (PC-MLO),
micro-lense optic
Ceiling unit: Aluminium
Classification Class I, IP20, CE, ENEC
Control interface Dimming by DALI
Remarks Lighting controls to be ordered separately. Suspension set delivered with luminaire.
Housing shapes: curved up (H-UP), curved down (H-DN)
Lifetime 50,000 burning hrs. (At L70)
Professional LED Catalouge 201140 Unleashing new possibilities with LED 41
Today, retail success depends on creating a relaxing environment in which customers can enjoy discovering the merchandise
you have to offer. A unique shopping experience will encourage them to linger for longer and help them to feel at ease with
your brand. And the longer they spend in store, the more they’ll be inclined to buy.
LEDs in RetailApplications: Shop windows, Entrances, Selling spaces and displays, Instore architecture
Attract people
Dynamic lighting has the power to attract people. It can
give your store real stopping power by distinguishing
your façade, creating irresistible window displays and
bringing your brand to life. Light can support your
marketing activities/ POS promotions and run them
effectively. At the touch of a button you can change
your store environment.
Make them stay
Once inside, a comfortable, exciting ambience will make
people enjoy the experience and stay longer. Lighting
controls are the perfect way to set the right lighting
mood so you can encourage your customers to feel
relaxed and carry on browsing.
Return visits increase revenue
The more customers enjoy your store experience, the
more likely they are to talk about it with friends. And by
optimising the lighting with excellent colour rendering
you can ensure what they see is what they get, so you
see fewer returns and more repeat visits.
Secure brand consistency
Remote control management enables you to take control
of the lighting design of all your stores.
Professional LED Catalouge 201142 Unleashing new possibilities with LED 43
Shop windowsEverybody is vying for attention. But with the proper lighting, your shop window can stand out in
the crowd. Light can be directed exactly where you want it, to offer highlights and texture. Also, by
applying higher lighting levels to your display and avoiding dark rear walls in the background, you
can avoid your window turning into a mirror. Dynamic lighting can create stopping power, support
seasonal themes, make shoppers curious, and make them want to enter. Magneous
Page 61
Stylid
Page 62
iColor Cove MX Powercore
Page 130
Professional LED Catalouge 201144 Unleashing new possibilities with LED 45
EntrancesThe entrance is the gateway to your brand. Shoppers should not only be enticed in – with, for
example, highlighted focal points, such as a new product or a seasonal ad campaign – but also feel
comfortable when they enter and want to explore further. They should understand the layout of the
shop and be able to locate the areas that interest them. Lighting can be used to provide each zone
with its own distinct character, while ensuring a cohesive ambiance that reinforces your brand. iColor Flex MX
Page 130
LuxSpace
Page 58
LED Spot
Page 60
Professional LED Catalouge 201146 Unleashing new possibilities with LED 47
Selling space and displaysIt is here that your brand comes into its own. People need to see where they are walking and also
view the products in the best way. Careful use of vertical lighting on walls can make your shop look
more spacious or use more contrast by narrow beams to create a more intimate experience.
DayZone
Page 35
GreenLED
Page 37
Quadra 1
Page 32
LuxSpace
Page 58
Professional LED Catalouge 201148 Unleashing new possibilities with LED 49
Instore architectureShops often have interesting architectural features – interesting wall structures, an exposed girder, a
column. By picking these out with careful lighting, you can make the stage more interesting for the
shopper. It is all about creating the shopping experience. Creating the promise of something exciting,
something out of the ordinary. Often such features can provide an inspiration for displaying products,
and for setting the scene for higher sales. Color Blast Powercore
Page 131
iColor Cove MX Powercore
Page 130
iColor Flex MX
Page 130
iColor Tile MX
Page 131
Professional LED Catalouge 201150 Unleashing new possibilities with LED 51
Bio-PlanetLeuven, Belgium
“With the Green Supermarket concept, Philips fits in seamlessly with Bio-Planet’s green philosophy. It is a clever selection of environmentally friendly and cost-effective lighting solutions, as well as being customer-friendly.”
- Tamara de Ridder, Marketing Manager Bio-Planet
The Project Bio-Planet is an appropriate name for Belgium’s greenest supermarket. The Colruyt Group stores are
known for their extensive selection of organic and green products, but their environmental awareness
doesn’t stop there. Opening a new branch in Leuven gave them the perfect opportunity to specify the
most durable and energy saving materials.
In this endeavour Bio-Planet was not alone, says Tamara de Ridder, the supermarket chain’s Marketing
Manager. “Philips developed a customized Green Supermarket lighting concept, a clever selection of
environmentally friendly and cost-effective lighting solutions attuned to the various sections of the
supermarket.” The attractive properties of the light turned out to be an added bonus: products were
illuminated in a more attractive way and looked fresh for longer. Bio-Planet really stands out from the
crowd in a field where competition is important.
The SolutionBio-Planet’s customer sees the effect of the Green Supermarket concept all around when shopping. At
the entrance LuxSpace downlights fitted with phosphor LEDs create an inviting ambiance. Compared to
the usual energy saving lamps, 50% more energy is saved and they have a 50,000 hour lifespan. The same
combination of attractive illuminations, energy saving and low maintenance costs was the aim for the
entire store. The total energy saving for the current lighting is 25%. And ingenious applications of LED
technology feed the imagination. For example, at the fresh food counter Fugato FM Fortimo Food LED-
downlights make the cuts of meat look really natural. In the cooling cabinets Fortimo LED Food Modules
provide a full light spectrum without UV radiation, which prevents product discolouration and keeps the
products fresh. The bakery department was fitted with adjustable spotlights with champagne coloured LED
light. The bread products are also attractively illuminated and because of the minimal heat generation the
products remain fresh for longer. The use of the robust, waterproof Pacific LED armature in the fruit and
vegetable department highlights Bio-Planet’s innovative approach. Apart from their economical and efficient
illumination, LEDs also benefit from higher light output in colder areas.
Case study
LuxSpace
Page 58
Professional LED Catalouge 201152 Unleashing new possibilities with LED 53
Fussl FashionVienna, Austria
“Fussl Fashion is not just a byword for high-quality clothing, but also for social and environmental responsibility. For us, a long-term approach is important when we think and act. Installing Philips’ innovative LED systems proves this.”
- Ernst Mayr, one of the managing directors of Fussl Fashion
The Project Fussl Fashion specialises in fashion for men, women and children, from exclusive labels to internationally
renowned brands. The rapidly growing company currently has 115 branches throughout Austria and
anticipates 2010 sales of over 100 million euros. But Fussl’s finger is not only on the fashion pulse. The firm
also takes its environmental protection responsibilities seriously.
The tough environmental challenge is to be saving 1000 tonnes of CO2 per year in the near future. For this
reason, throughout the new 645 m2 branch in Shopping City Süd in Vösendorf (Vienna), they planned to
install a LED lighting system that would pay for itself within 5 years at most. A lighting concept would show
off the colour and quality of the garments in every part of the sales area. It also had to be low maintenance
and provide a high light level of 1000 lux, which was standard in nearby fashion boutiques.
The Solution155 Latina LED compact lights illuminate the general area in Fussl’s new flagship store in one of Europe’s
largest shopping centres. The attractive downlights are supported by 26 innovative DayZone lights. Their
warm, non-glare light with colour temperatures of 3000 K make a great impression. Thanks to the circular
light’s beam – the lamp itself is angular – the DayZones significantly improve the ambience and are effective
in preventing any tunnel effect. The garments are highlighted with compact StyliD spots 25 W (3000 K and
4000 K). 100 swivelling StyliD recessed luminaires were installed in the entrance area, 110 swivelling StyliD
semirecessed luminaires are positioned in the walls, and 75 StyliD power-track spots were put in the display
area and the store. Because of the modern accent lighting system the space looks much wider and deeper.
Herbert Gadermayr, CEO of Gadermeier, the electrical installation company: “With these innovative Philips
LED systems, we have achieved an ideal lighting system with excellent colour reproduction, that also meets
Fussl Fashion’s environmental requirements.”
Compared with halogen lighting, the flagship store now realises a significant drop in CO2 emissions and a
long-term fall in energy costs. As a result of the long 15-year service life, operating and maintenance costs
will also fall substantially. Thanks to the relaxed atmosphere the shopper feels at home and is able to clearly
see the colour and texture of each garment. The staff find the new lighting far more pleasant particularly
due to the reduced glare level and the low level of heat generation. For these reasons, the new lighting
concept has successfully been introduced in many other branches of Fussl Fashion.
Case study
DayZone
Page 35
Professional LED Catalouge 201154 Unleashing new possibilities with LED 55
Heineken The CityAmsterdam, The Netherlands
“LED lighting is innovative, offers a great many new possibilities and really suits the ‘look and feel’ we wish to convey. Furthermore, by fitting the entire shop with LED lighting we are 100% distinctive from everyone else.”
- Marc van der Mijn, Store Manager Heineken brand store
The Project Close to the Rembrandtplein in Amsterdam there is a unique store where you can experience the
Heineken brand in a spectacular way: Heineken The City. Spread over the four areas of music, fashion,
travel & events and a beer shop (beer-related products), the visitor is offered a range of possibilities. From
booking tickets for events, the purchase of exclusive clothing and bags to designing your own beer bottles...
Heineken literally brings its mission of ‘Serving the planet’ to life here.
The SolutionIn the hyper-modern equipped retail store architecture, technology and LED lighting flow together in
harmony. Whereas the LED lighting sometimes supports the architecture, it often demands a dominant
role itself. LED string has been used in this way for supportive (Heineken) green accent lighting in the coves
above the wall furniture. And the cool white light of the LEDline² is appropriately ever-present in the life-
size, decorative refrigerators containing beer bottles. Warm white light provides an intimate atmosphere
in the recording studio. From the mirror wall which comes to life wonderfully thanks to ‘LED pixel’
backlighting, the Spot LED for the lighting of Heineken gadgets, to the fresh spotlighting of the LEDline²
for the walls and either side of the entrance: LED lighting has been applied refreshingly and functionally
throughout.
The benefits
“Our visitors are often bowled over by the store’s ambience.
The lighting certainly contributes to that effect. LED lighting has a clear added value compared to other
lights,” says van der Mijn. “It creates a real atmosphere, which at the same time provides good light.
Furthermore, LED lighting has a very low energy consumption, which is even more attractive with so many
light sources.” A further advantage is the long lifecycle of the bulbs. “The Spot LED has been used in some
‘inaccessible’ places. Fortunately we don’t have to replace them very often.”
eW Downlight Powercore
Page 130
Case study
Professional LED Catalouge 201156 Unleashing new possibilities with LED 57
McdonaldsMumbai, India
“Philips led retail lighting has given McDonalds more control over its operational cost”- Vinay Halambi, General Manager – Projects, McDonalds India – West & South
The Project McDonald’s is the world’s leading food service retailer with more than 31,000 restaurants in 119 countries
serving more than 50 million customers each day. Celebrating over 12 years of leadership in food service
retailing in India, McDonald’s now has a network of over 160 restaurants across the country, with its first
restaurant launch way back in 1996. Prior to its launch, the company invested four years to develop its
unique cold chain, which has brought about a veritable revolution in food handling, immensely benefiting
the farmers at one end and enabling customers to get the highest quality food products, absolutely fresh
and at a great value. McDonalds as a company is very sensitive towards its environment responsibility and
has always encouraged innovations to reduce their carbon foot prints. Among the various initiatives, LED
lighting is one of the key areas of impact.
The SolutionOn the lighting front the challenge was to create an inviting and warm ambiance for the customers without
worrying about the repair and maintenance of the light fixture during the operational hours. Philips LEDO
LED down lighters were used.
Case study
Ledo
Page 34
Professional LED Catalouge 201158 Unleashing new possibilities with LED 59
LuxSpace
General descriptionThese innovative downlights can be used for applications that require a green general lighting solutions for instance in
offices, shops, hotels and hospitals. Their extremely low power consumption results in significant energy savings compared
with traditional CFL downlights.
Product Specifications
Specifications
Type BBS478 Basic: BBS488/Comfort: BBS489 Basic: BBS498/Comfort: BBS499
Light source DLED Micro DLED Mini DLED Compact
Lumen output 600lm 1100lm 2000lm
Light color Warm white: 3000KNeutral white: 4000K
Warm white: 3000KNeutral white: 4000K
Warm white: 3000KNeutral white: 4000K
Power consumption 9W 13W 28W
Voltage 220V-240V/50, 60Hz 220V-240V/50, 60Hz 220V-240V/50, 60Hz
Driver Integrated independent driver box Integrated independent driver box Integrated independent driver box
Optics High glossy mirror, matt reflector (M) High glossy mirror, matt reflector (M) High glossy mirror, matt reflector (M)
Material Heat sink, bracket, reflector and front rim : aluminiumFixation: steel and polycarbonateDriver box: plastic
Heat sink, bracket, reflector and front rim : aluminiumFixation: steel and polycarbonateDriver box: plastic
Heat sink, bracket, reflector and front rim : aluminiumFixation: steel and polycarbonateDriver box: plastic
Lifetime 50,000 burning hrs. (At L70) 50,000 burning hrs. (At L70) 50,000 burning hrs. (At L70)
Accessories • Adaptor ring 125 mm to 150 mm cut-out diameter ZBG470 C CFRM D150
• Suspended glass disk with frosted inner part ZBG470 C SG-FRC
• Suspended grosted-glass halo ring ZBG470 C SG-HR-FR
• Suspended opal glass ZBG470 C SG-O
• Recessed frosted -glass ZBG470 C GF
• Recessed frosted-glass halo ring ZBG470C GF-HR
• Adaptor ring 150 mm to 175 mm cut-out diameter ZBS480 C CFRM D175
• Suspended glass disk with frosted inner part ZBS480 C SG-FRC
• Suspended grosted-glass halo ring ZBS480 C SG-HR-FR
• Suspended opal glass ZBS480 C SG-O
• Recessed frosted -glass ZBS480 C GF
• Recessed frosted-glass halo ring ZBS480C GF-HR
• Adaptor ring 200 mm to 225 mm cut-out diameter ZBS490 C CFRM D225
• Suspended glass disk with frosted inner part ZBS490 C SG-FRC
• Suspended grosted-glass halo ring ZBS490 C SG-HR-FR
• Suspended opal glass ZBS490 C SG-O
• Recessed frosted -glass ZBS490 C GF
• Recessed frosted-glass halo ring ZBS490C GF-HR
GreenSpace
General descriptionGreenSpace is a high performance LED downlighter with high system efficacy for good quality and uniform lighting. With its
simple yet elegant design, it conforms to general lighting norms for offices, shops, and other indoor applications, providing an
essential tool to owners, designers, and installers to explore energy saving practices.
Also available in 1000 and 600 lumens.
Specifications
Type BBS180 BBS181 BBS182
Light source DLED Micro DLED Mini DLED Compact
Lumen output 600lm 1000lm 2000lm
CRI 80 80 80
Light color Warm white: 3000KNeutral white: 4000KCool white: 5000K
Warm white: 3000KNeutral white: 4000KCool white: 5000K
Warm white: 3000KNeutral white: 4000KCool white: 5000K
Power consumption 9W 15W 30W
Voltage 220V-240V/50, 60Hz 220V-240V/50, 60Hz 220V-240V/50, 60Hz
Driver Integrated Integrated Integrated
Optics Matt diffuser Matt diffuser Matt diffuser
Cut out ø125mm ø175mm ø225mm
Material Heat sink: Die-castingDiffuser: PCReflector & front rim:PlasticFixation: Steel
Heat sink: Die-castingDiffuser: PCReflector & front rim:PlasticFixation: Steel
Heat sink: Die-castingDiffuser: PCReflector & front rim:PlasticFixation: Steel
Color White(WH) or Grey(GR) White(WH) or Grey(GR) White(WH) or Grey(GR)
Installation Fixation by means of spring fasteners
Fixation by means of spring fasteners
Fixation by means of spring fasteners
Variant
Variants
Also used in
Office
Also used in
Office
Professional LED Catalouge 201160 Unleashing new possibilities with LED 61
General descriptionThe Philips Smart LED Spot is a solid state lighting solution with reliable qualities. With its trendy design and good
light performance, Smart LED Spot lets you achieve a variety of different lighting effects, from surface grazing to direct
illumination of target spaces or objects.
Product Specifications
Specifications
Trio Uni
Warm White Cool White Warm White Cool White
Model number BBG360(Stand alone) / BBG363(Kit)B BBG360 (Stand alone) / BBG361 (Kit)
Light source 3 x Rebell 1 x Rebell
Light color (average) 3000K 6000K 3000K 6000K
Beam angle Narrow beam 10°
Medium beam 25°
Lumen output 274lm (10D) 394lm (10D) 103lm (10D) 146lm (10D)
257lm (25D) 362lm (25D) 95lm (25D) 142lm (25D)
Intensity (candela) 6395lm (10D) 10631lm (10D) 2438lm (10D) 4141lm (10D)
1084lm (25D) 1643lm (25D) 394lm (25D) 721lm (25D)
Power requirement 220-240V AC / 50-60Hz
Power consumption 8.2 W (3lum+1driver mold) 3.4 W (3lum+1 driver mold)
Dimmable Yes
Installation Recessed mounted
Material Housing: aluminium
Optics: PMMA
Classification IP20
Color rendering index (Ra) 80 70 80 70
Power factor (10W/30W) 0.95
Lifetime 50,000 burning hrs. (At L70)
Cut out size 83mm 64mm
Height 51.5mm 38.5mm
Driver 10W / 30W
Linkable quantity 1 pc (10W driver) / 4 pcs (30W driver) 3 pcs(10W) / 12 pcs (30W)
LED Spot Magneos
General descriptionThe Magneos projector family offers a choice of lamps or LED light sources as well as a variety of optics, accessories and color
finishes. Magneos enables retailers to configure their own solution.
Specifications
Type BRG470 / BCG470
Light source 7 x Luxeon® Rebeloptions:Warm whiteNeutral whiteRGBMono and dimming
Luminous flux Warm white: 372lm (12°) 348lm (24°)Neutral white: 660lm (12°) 630lm (24°)RGB: 270lm at full output (12°) 282lm at full output (24°)
Light color Warm white: 3000KNeutral white: 4000K
Power consumption Mono: 18WDimming: Max. 20WRGB: Max. 20W
Voltage 100-240V AC / 50-60Hz
Installation BRG470: Track mountedBCG470: Surface mounted
Material Housing: Die-cast aluminium; Optics: Polycarbonate
Color rendering index (Ra) Warm white: 80Neutral white: 75
Classifications IP20, Class I
Power factor 0.95
Control interface Mono: SwitchesDimming: DMX512RGB: DMX512
Lifetime 40,000 burning hrs. (At L70)
Variant Variant
Professional LED Catalouge 201162 Unleashing new possibilities with LED 63
Stylid
General descriptionStyliD, a first truly flexible LED solution to meet all retail accent lighting requirements for light quality, design and energy
efficiency. Built around a single and attractive design signature and available in three sizes, StyliD projectors incorporate
advanced glare control optics and Philips’ new Optibin technology to guarantee color consistency in any application.
Specifications
Type BBG510 BBG520 BBG530 BBG540
Light source 1xSLED400 1xSLED800 1xSLED1200 1xSLED1700
Lumen output 410lm (3000K)415lm (4000K)
630lm (3000K)690lm (4000K)
1040lm (3000K)1140lm (4000K)
1700lm (3000K)2000lm (4000K)
Light color Neutral White: 4000KWarm White: 3000K
Neutral White: 4000KWarm White: 3000K
Neutral White: 4000KWarm White: 3000K
Neutral White: 4000KWarm White: 3000K
Power consumption 10W 17W 24W 38W
Voltage 220-240V AC 50 Hz 220-240V AC 50 Hz 220-240V AC 50 Hz 220-240V AC 50 Hz
Driver Integral Constant Current Driver
Integral Constant Current Driver
Integral Constant Current Driver
Integral Constant Current Driver
Optics High Efficiency optics with options for Beam Angles of 13, 25 & 40 Degrees
High Efficiency optics with options for Beam Angles of 13, 25 & 40 Degrees
High Efficiency optics with options for Beam Angles of 13, 25 & 40 Degrees
High Efficiency optics with options for Beam Angles of 13, 25 & 40 Degrees
Material Heat sink: Die-castingDiffuser: PCReflector & front rim:PlasticFixation: Steel
Heat sink: Die-castingDiffuser: PCReflector & front rim:PlasticFixation: Steel
Heat sink: Die-castingDiffuser: PCReflector & front rim:PlasticFixation: Steel
Color White White White White
Lifetime 50000 burning Hrs.(At L70)
50000 burning Hrs.(At L70)
50000 burning Hrs.(At L70)
50000 burning Hrs.(At L70)
CRI >85 >85 >85 >85
Note : The Products are available in options for round and square shapes. The Range also has options for recessed, recessed-adjustable, semi recessed , surfaced and
Track Mounted arrangements
Professional LED Catalouge 201164 Unleashing new possibilities with LED 65
Lighting a greener urban future
The landscape of the lighting industry is changing fast.
The energy-efficiency imperative, legislative pressures
such as Kyoto and the world of possibilities opened up
by the LED revolution are all having a positive influence
on our lighting choices. We’re spreading the word under
our theme of Sustainable Cities. It is our way of helping
urban authorities to reduce energy consumption so they
can lower CO2 emissions and improve the quality of life
in their towns and cities.
Solutions for upcoming legislative needs
This period of financial and energy challenges is the time
to look for new approaches. Cities and boroughs need
to think ahead and introduce new lighting solutions into
their future lighting projects. Modern lighting concepts will
enhance the whole cityscape and the results will benefit
residents and guests alike. Philips has a wide range of low-
maintenance, high-quality products that are at the leading
edge of outdoor lighting. What follows is only a selection,
for more lighting products go to www.philips.com/lighting
LEDs in outdoor spacesApplications: City Centres, Residential Area, Roads and Transport
Professional LED Catalouge 201166 Unleashing new possibilities with LED 67
Architectural lightingRecognising landmarks is an important step in developing a comprehensive approach to urban
environments. Lighting a building, monument or architectural feature contributes to the identity of
a place. It also creates a marker for orientation. Whether you are working on a single building or an
entire master plan, Philips Lighting has state-of-the-art technologies and solutions, backed up by more
than a century of lighting application expertise. Color Reach Powercore
Page 131
Color Graze
Page 130
Color Blast TR
Page 131
Color Burst 6
Page 131
Professional LED Catalouge 201168 Unleashing new possibilities with LED 69
City centersLighting plays a central role in how people feel about their city, town or village. That is why the illumination
of streets and pedestrian areas has evolved from simple functional lighting into a more demanding and
creative discipline. Not only is light required in which people can drive, cycle and walk safely, it must
be pleasing and inviting too. It should promote communication and well-being, encourage night-time
socialising and complement the cities night life. But luminaires also have an important architectural role.
During the day they become an integral part of the street scene. Our range of architectural street
luminaires are designed with this is mind, giving you a winning blend of performance and style.
LED Post-top
Page 88
LED Bollard II
Page 92
Roadstar
Page 82
Greenline
Page 83
Professional LED Catalouge 201170 Unleashing new possibilities with LED 71
Residential areasFor many years residential lighting was purely functional. Although safety, security and orientation are
still essential requirements, there is now a drive to improve residents quality of life, creating a pleasing
identity for these parts of the city that are often overlooked.
LED Step-light
Page 89
LED Wall mount
Page 90
LED Post-top
Page 88
LED Bollard II
Page 92
Professional LED Catalouge 201172 Unleashing new possibilities with LED 73
Roads and transportWith more than one hundred years of experience and expertise in the field of road lighting, we are
in an ideal position to analyse market trends and create appropriate solutions. We apply technological
innovation to the design and development of the road lighting products of the future, to meet the
wishes and needs of our customers.Roadstar
Page 82
Greenline
Page 83
Solar
Page 84
Alpha
Page 85
Professional LED Catalouge 201174 Unleashing new possibilities with LED 75
BPTilburg, The Netherlands
“ Low energy consumption is important, and so is a sense of security. But the most important factor is the customer experience. Customers should experience the shop as a pleasant environment to stay in. This has been made possible, thanks to Philips.” - Tamara de Ridder, Marketing Manager Bio-Planet
The Project Joost van Aardenne talks about the complete renovation of the BP petrol station at the Kempenbaan West
in Tilburg. “We had a unique opportunity to give the station a complete facelift. We wanted to significantly
improve the customer experience - but not at the cost of the environment. Another priority was to reduce
the station’s energy consumption.” The ultimate goal was clear: within six and a half weeks, the new BP
signboard and Wild Bean Café had to be up and running. The entire project is to serve as a pilot project for
the rest of theNetherlands.
The Solution“Philips Lighting has supported us by sharing their expertise and experience in lighting. That is how we
ended up with the LED concept. This is the first petrol station illuminated entirely by LED lighting,” adds
a proud Joost van Aardenne. “LED offers all kinds of possibilities. It does not need time to warm up, it
consumes little energy, and it has a longer life span.” Spotlighting certain elements gives customers greater
focus. And the intensity of the light is varied to create a pleasant atmosphere in the Wild Bean Café, while
giving the products in the refrigerated section stronger and more appealing visibility. LED lighting also
provides significant advantages outside the shop. “The awning lights dim when there are no customers and
brighten when a customer drives up. This not only results in tremendous cost savings, but also gives
customers a greater sense of safety,” according to Joost van Aardenne.
The benefits
“Our visitors are often bowled over by the store’s ambience.
The lighting certainly contributes to that effect. LED lighting has a clear added value compared to other
lights,” says van der Mijn. “It creates a real atmosphere, which at the same time provides good light.
Furthermore, LED lighting has a very low energy consumption, which is even more attractive with so many
light sources.” A further advantage is the long lifecycle of the bulbs. “The Spot LED has been used in some
‘inaccessible’ places. Fortunately we don’t have to replace them very often.”
Case study
Mini300LED Spot
Page 60
Professional LED Catalouge 201176 Unleashing new possibilities with LED 77
City centreTerneuzen, The Netherlands
“ The bulb in a floodlight lasts three years on average, while an LEDline lasts 25 years. This makes one thing certain: Vilvoorde will get enjoyment out of its light concept for a very long time”- Christophe Thomas, Lighting Designer for Outdoor Lighting Belgium and Luxembourg
The Project Background
The Flemish town of Vilvoorde has recently gained a prestigious light installation with its renovated town
hall, thanks to warm white light from surface illumination created by floodlights, and cool light from
vertically arranged LED floodlights – city beautification at its very best.
The Challenge
“This was a very important project, not only technically, but also regarding Philips’ image. This is why we
created a model, not only to demonstrate the natural transition to the end product, but also to create a
connection by making our design tangible. And despite the fact that our concept was considerably more
expensive than that of our biggest competitor, mayor Jean-Luc Dehaene was very happy to team up with
us,” says Christophe Thomas, Lighting Designer for Outdoor Lighting Belgium and Luxembourg.
The SolutionThomas’ light design stands out through its simplicity: there aren’t too many frills, but rather a meticulous
blend of warmth and austerity. There are reasons for this: “The town hall is an old building with a classic
appearance, which means the lighting plan has to be kept simple, while also highlighting the right areas
and being easy to maintain.” Thanks to the subtle light combination from floodlights and LEDlines, this has
been a great success. “In total we used four different light varieties: Decoflood, Mini Decoflood, Pompeï
and LEDlines. The latter product illuminates the vertical lines of the building in particular, but without being
dominating. The cool white light from the LEDlines, contrasted with the warmer light from the floodlights,
creates a distinct tone for the overall concept, especially in combination with the town hall’s blue bricks.”
Because the LEDlines have been mounted at a great height and are exactly as wide as the columns they
illuminate, they can barely be seen.
The benefits
What’s possibly even more important is that they will last a very long time. Thomas: “The bulb in a floodlight
lasts three years on average, whilst an LEDline lasts 25 years. This makes one thing certain: Vilvoorde will get
enjoyment out of its light concept for a very long time.”
Case study
LEDLine²
* ColorGraze can give a similar effect
DecoFlood
Professional LED Catalouge 201178 Unleashing new possibilities with LED 79
City hallVilvoorde, Belgium
“Thanks to floodlighting and other lights using LED, colours and details can now really be seen. Even the bullet holes in the facade, which only older Rotterdammers knew were still there, are visible again.”- Marco de Boer, Primo Exposures
The Project At the moment, the Coolsingel in Rotterdam is going through a complete metamorphosis thanks to the
implementation of a new lighting plan, and the illumination of the City Hall is also currently being worked
on. The stunning architecture and history of the building are now shown in their full glory once again.
Rotterdam City Hall was completed in 1920 and surprisingly it survived the bombing raids of 14 May
1940. Aside from the ground floor, there are three storeys and an attic and the building also has a clock
tower which is more than 70 metres high. Rotterdam’s citizens are proud of their city hall, but according
to Marco de Boer of Primo Exposures, there was a large discrepancy between this pride and the building’s
illumination, which is why he took care of the final design and installation of the new lighting. “The town hall
was illuminated at night by sodium lights and their yellow light made the facade look completely flat. We’ve
now illuminated the building in such a way that justice is done to its fine architecture.”
The SolutionLEDline² was installed along the edge of the majestic roof. The clear white light, enriched with a small
amount of blue, emphasises the blue-grey hue of the slate roof. The stepped gable has also been fitted with
LEDline2, supported by four Proflood light fixtures, two of which are aimed at the statue at the centre. The
two narrow windows at the sides of the main entrance are magically illuminated. “We achieved this effect
by using the most modern Proflood light fixtures, fitted to two posts opposite the building. This is a first
for the Netherlands,” says Marco de Boer. The ten statues along the facade are each lit by two to four LED
modules and in addition another LEDline2 light fixture was placed in a recess in the corner tower, behind
the large statue of Johan van Oldenbarneveld. This brings the statue into the foreground even more. Marco
de Boer has received many positive reactions to his project. Thanks, amongst other things, to floodlighting
with LED lights, the building’s colours and details can now really be seen. Even the bullet holes in the facade,
which only older Rotterdammers knew were there, are visible again.
Case study
ProfloodLEDline²
* ColorGraze can give a similar effect
Professional LED Catalouge 201180 Unleashing new possibilities with LED 81
Kolkata municipal corporation - LED Street lightingKolkata, India
“Philips Lighting partnered with Kolkata Municipal Corporation and the Climate Group to help municipal corporations understand practical ways in which they could make substantial cuts in urban emissions and savings on energy from street lighting.”- Aditi Dass, The Climate Group
The Project The Climate Group is an independent, not-for-profit organization working internationally with government
and business leaders to advance smart policies and technologies to cut global emissions and accelerate
a clean industrial revolution. Its global coalition of companies, states, regions and cities around the world
recognize the economic and environmental imperatives of taking decisive actions now. The Climate Group
is working with the world’s most influential business and government leaders to make clean technologies
commercially viable.
The group wanted to take up the very new technology - LED lighting which consumes about 40-50% less
energy than the conventional sodium vapor lamps. This reduction of 40-50% goes up to as high as 70-80% if
the LEDs are controlled by smart adaptive controls.
The SolutionPhilips Lighting partnered with Kolkata Municipal Corporation and the Climate Group to help municipal
corporations understand practical ways in which they could make substantial cuts in urban emissions and
save on energy from street lighting. In Kolkata, the group has retrofitted around 300 street lights with
Philips Roadstar LED streetlights.
Case study
Roadstar
Page 82
Professional LED Catalouge 201182 Unleashing new possibilities with LED 83
Roadstar
General descriptionPhilips Lumec road lighting luminaire is dark-sky compliant using unique, sealed optics with vibration resistant design,
offering better light control, uniformity and upto 8 times spacing between poles and maintenance free system with a life
class of upto 70,000 hrs with excellent thermal management.
General descriptionPhilips road lighting luminaire with 24 High power LED and extendable upto 48 High power led, with unique peanut lens
to ensure uniform distribution, higher spacing between poles and maintenance free system. With a life class of 50000hrs
(At L70) with excellent thermal management.
Greenline
Product Specifications
Specifications
Type Greenline Greenline Duo
Light source 24 High Power LED 2x24 High Power LED
Lumen output from luminaire 3500lm 7000lm
Color Cool white Cool white
Power consumption 45W 90W
Voltage 220V-240V AC 50Hz 220V-240V AC 50Hz
Optics Peanut optics Peanut optics
Driver Integral type Integral type
CRI >70 >70
Mounting (OD) 28-40mm 48-60mm
Weight 2.4Kg. 6.0Kg.
Protection IP 65, Class I IP 65, Class I
Specifications
Type Roadstar
Light source LED
Color 4000K
Lamp Wattage (LED) range 40W-180W
System power range 45W-204W
Voltage 220V-240V, 50Hz
Driver Integral type
CRI >70
Mounting (OD) 60mm
Protection IP 66, Class I
Vibration test levels 3G*
* As per ANSI C136.31 Table 2
Variant
Professional LED Catalouge 201184 Unleashing new possibilities with LED 85
Solar LED
General descriptionThe sun is an in-exhaustive, reliable, non-polluting source of power. Concerns over global climatic change, local air
pollution and resource scarcity make photovoltaic (PV) an increasingly attractive energy supply technology. Combining
the solar energy with LEDs can provide efficient lighting solutions. Solar powered outdoor lighting products are ideal for
lighting the area in remote locations where the electricity is unavailable or erratic. Even in urban areas, these find great
usage to reduce dependency on conventional power and contribute towards green energy. Reliable and long life makes
this solution effective in fulfilling our present and future lighting requirements.
Alpha
General descriptionPhilips road lighting luminaire uses future proof FORTIMO LED module for constant light output through its life.
With specially designed prismatic cover, it ensures uniform distribution, higher spacing between poles and maintenance
free system.
Product Specifications
Specifications
Type Alpha
Light source FORTIMO LED
Lumen output from luminaire 1550lm
Color Day light
Power consumption 25W
Voltage 220V-240V AC 50Hz
Driver Integral type
CRI >70
Mounting (OD) 28-40mm
Weight 2.8Kg.
Protection IP 65, Class I
Specifications
Type BRP 202 BRP 302 BRP 402
System (W) 8 13 21
Lumen output 700lm 1100lm 1800lm
Battery (AH) 40@12V 60@12V 100@12V
Panel (WP) 40 60 100
Pole 4 4 5/6
Variants
Professional LED Catalouge 201186 Unleashing new possibilities with LED 87
LED Spot
General descriptionPhilips LED SPOT offers accent lighting with easy to install and high ingrees protection, comes equipped with suitable
mounting options like SPIKE, CLIP and surface mounting option ideal to replace halogen source of similar application.
Specifications
Type BGP310 BGP311
Light source 1/3 High Power LED 1/3 High Power LED
Lumen output 1 LED - 98lm3 LED - 250lm
1 LED - 98lm3 LED - 250lm
Color WW (3000K), NW (4000K), AM WW (3000K), NW (4000K), AM
Power consumption 1 LED - 2.2W3 LED - 6W
1 LED - 2.2W3 LED - 6W
Voltage 1 LED - 24VDC3 LED - 220-240V, 50 Hz
1 LED - 24VDC3 LED - 220-240V, 50 Hz
Optics 12D/24D/36D 12D/24D/36D
Driver Integral type Integral type
CRI >70 >70
Protection IP 65, IK08 IP 65, IK08
Mounting Accessories optional SPIKE (ZGP311)
Variants
Uplite
Product Specifications
General descriptionPhilips LED UPLITE offers accent lighting with easy to install and high ingrees protection, comes equipped with suitable
mounting box.
Specifications
Type BBP330
Light source 9 HIGH Power LED
Lumen output 790lm
Color WW (3000K), NW (4000K), AM,GN
Optics 12D,24D,36D
Power consumption 15.8W
Voltage 220V-240V, 50Hz
Driver Integral type
Protection IP 67, IK10
Accessories Equipped with recess mounting box
Professional LED Catalouge 201188 Unleashing new possibilities with LED 89
General descriptionPhilips LED Step-light offers uniform asymmetric lighting with easy to install and high. This also has ingrees protection.
This light comes equipped with suitable mounting box.
General descriptionStylish, robost and reliable post top lantern using LED. With good light distribution, limited upward light component
avoiding light pollution, yet affordable.
LED Post-top
Product Specifications
LEDStep-light
Specifications
Type BWG 150
Light source 36 Low Power LED
Lumen output 35lm(WW), 40lm(NW)
Light color Warm White (3000K), Neutral White (4000K)
Power consumption 4W
Driver Integral type
Voltage 220-240V, 50 Hz
Optics Polycarbonate Diffuser
CRI >75
Weight 0.55Kg.
Protection IP 67, Class I
Accessories Equipped with recess mounting box
Specifications
Type BGP150 BGP151
Light source 18 High Power LED 24 High Power LED
Lumen output 1000lm (WW), 1600lm (NW) 1500 (WW), 2100(NW)
Light color Warm White (3000K) Neutral White (4000K)
Power consumption 42W 60W
Driver Integral type Integral type
Voltage 220-240V, 50 Hz 220-240V, 50 Hz
Optics Closed, Diffuser Closed, Diffuser
CRI >75 >75
Mounting (OD) 60mm 60mm
Weight 6.3Kg. 6.3Kg.
Protection IP 65, Class I IP 65, Class I
Professional LED Catalouge 201190 Unleashing new possibilities with LED 91
General descriptionPhilips LED wall mount offers a high level of durability with high impact resistant, and ingrees protection with comfortable
soft lighting.
General descriptionPhilips LED marker offers a high level of durability with high impact resistant, easy to install and ingrees protection, comes
equipped with suitable mounting box.
Product Specifications
LED MarkerLED Wall mount
Specifications
Type BWS150
Light source 96 Low Power LED
Lumen output 180lm (WW), 200lm (NW)
Light color Warm White (3000K), Neutral White (4000K)
Power consumption 8W
Driver Integral type
Voltage 220-240V, 50 Hz
Optics Polycarbonate Diffuser
CRI >75
Weight 0.58Kg.
Protection IP 65 / IK08 / Class I
Specifications
Type BBG 150 BBG 151
Light source 30 Low Power LED 30 Low Power LED
Lumen output 180lm (WW), 200lm (NW) 180lm (WW), 200lm (NW)
Light color Warm White (3000K), Neutral White (4000K)
Warm White (3000K), Neutral White (4000K)
Power consumption 3W 3W
Driver Integral type Integral type
Voltage 220-240V, 50 Hz 220-240V, 50 Hz
Optics Closed, Diffuser foggy glass Closed, Diffuser foggy glass
CRI >75 >75
Weight 1.06Kg. 0.97Kg.
Protection IP 67 / IK10 / Class I IP 67 / IK10 / Class I
Accessories Equipped with recess mounting box Equipped with recess mounting box
Professional LED Catalouge 201192 Unleashing new possibilities with LED 93
General descriptionPhilips LED Bollard offers a high level of durability with high impact resistant. This also has ingrees protection with easy
of installation and comfortable soft lighting.
LED Bollard II
General descriptionPhilips LED wall bracket light offers a simple, compact design but offer flexible beam angle with high impact resistant, easy to
install and ingrees protection, comes equipped with suitable mounting box which suits to a wide range of architectural styles.
Product Specifications
LED Bracket-Light
Specifications
Type BCP150 BCP151
Light source 96 Low Power LED 96 Low Power LED
Lumen output 300lm (WW), 400lm (NW) 300lm (WW), 400lm (NW)
Light color Warm White (3000K), Neutral White (4000K)
Warm White (3000K), Neutral White (4000K)
Power consumption 8W 8W
Driver Integral type Integral type
Voltage 220-240V, 50 Hz 220-240V, 50 Hz
Optics Closed Diffuser Closed Diffuser
Mounting (OD) Integral base plate Integral base plate
CRI >75 >75
Height 0.5 Mts 0.8 Mts
Weight 1.32Kg. 1.9Kg.
Protection IP 65 / IK10 / Class I IP 65 / IK10 / Class I
Specifications
Type BWS160 BWS161
Light source 2 High Power LED 4 High Power LED
Lumen output 120lm (WW), 150lm (NW) 240lm (WW), 300lm (NW)
Light color Warm White (3000K), Neutral White (4000K)
Warm White (3000K), Neutral White (4000K)
Power consumption 7W 15W
Driver Integral type Integral type
Voltage 220-240V, 50 Hz 220-240V, 50 Hz
Optics Closed Diffuser Closed Diffuser
Mounting (OD) Integral base plate Integral base plate
CRI >75 >75
Weight 0.461Kg. 0.591Kg.
Protection IP 66 / IK08 / Class I IP 66 / IK08 / Class I
Accessories Equipped with recess mounting box Equipped with recess mounting box
Variant
Professional LED Catalouge 201194 Unleashing new possibilities with LED 95
Philips Smart LED LandscapeA total solutionAt Philips, lighting urban landscapes is a passion as well as a science. From the sleek design, to the excellence in engineering to excellent lighting performance, our Smart LED Landscape solution is cohesive and designed with attention to detail.
• All products are unified by a common design language making
them seamless to combine and coordinate in your designs
• The lighting solutions are available in both warm white
(3000K) and neutral white (4000K) color temperature – giving
you choice and flexibility
• With full RoHS compliance, you have absolute peace-of-mind
knowing that our products are free of toxic materials
• The exclusive use of LED technology also means an
environmentally friendly lighting solution that needs less
maintenance
• And all our products have been engineered to a high degree
of water and impact resistance (proven IP and IK standards)
making them ideal candidates for outdoor environments
In short, our solution is just perfect for –
• Parks and Gardens
• Commercial areas such as squares, plazas etc.
• Residential areas
Professional LED Catalouge 201196 Unleashing new possibilities with LED 97
LED’s in Hospitality space
Adding value
Our hospitality products can add value in many different ways throughout your hotel. In guest rooms and public areas,
indoors and outdoors. For entertainment, relaxation or information. A more functional way or through something really
different and dynamic. On the following pages you will find examples for typical areas of a hotel. The products shown are
only a small selection of what is available for that particular application.
Professional LED Catalouge 201198 Unleashing new possibilities with LED 99
Receptions and lobbiesYou know what they say about never having a second chance to make a first impression. So don’t
miss the opportunity to create a welcoming ambience - fused with a hint of excitement and an air
of professionalism - at the entrance point to your hotel. This is a dynamic and often busy area where
people come together and interact at all hours of the day. The lighting, as well as the information and
entertainment possibilities, should reflect this. DayWave
Page 38
Master LED GU10
Page 140
LuxSpace
Page 58
LED Spot
Page 60
Professional LED Catalouge 2011100 Unleashing new possibilities with LED 101
Corridors and other transition areasCorridors and other areas of transition often lack natural daylight. But that doesn’t mean they have
to lack appeal. We have a variety of lighting and infotainment solutions for brightening the mood
and showing the way. And although such areas have to be illuminated whenever someone is present,
the lights don’t have to be on 24 hours a day.
Master LED GU10
Page 140
Luxspace
Page 58
LEDO
Page 34
Professional LED Catalouge 2011102 Unleashing new possibilities with LED 103
Luxury rooms and suitesGuests treating themselves to a few days of luxury or executives on a business trip deserve and
expect a 5-star treatment. We can help you give them exactly that... and more! No expense has been
spared in developing our state-of-the-art audio-visual solutions to offer your guests a profoundly
enjoyable entertainment experience. And our cutting-edge lighting solutions provide added visual
comfort, creating that special ambience for a truly memorable stay. DayZone
Page 35
Ledino table lamp
Page 111
Ledino wall light
Page 113
Professional LED Catalouge 2011104 Unleashing new possibilities with LED 105
Bars, restaurants and loungesThe right ambience is crucial. These are places where people go to unwind, socialise and enjoy
themselves, but also to meet and entertain business associates. Through the strategic use of creative
lighting you can make things stimulating and refreshing during the day and more intimate and laid
back at night. Or the other way round! On top of that, uniquely appealing and premium-quality
infotainment displays can act as a real magnet for guests. iColor Cove MX Powercore
Page 130
eWDownlight Powercore
Page 130
Ledino wall light
Page 113
Ledino wall light
Page 112
Professional LED Catalouge 2011106 Unleashing new possibilities with LED 107
Wellness areasWellness areas have become indispensable in hotels of all sizes. Gyms, saunas, swimming pools
and massage rooms, as well as beauty salons, hairdressers and even spas, are becoming evermore
standard features. Whether you want to set the right ambience, ensure adequate levels of safety
and security or provide some entertaining distraction for those trying to knock themselves into
shape, we have plenty to offer. Ledino wall light
Page 113
Ledino wall light
Page 112
iColor Cove MX Powercore
Page 130
eWDownlight Powercore
Page 130
Professional LED Catalouge 2011108 Unleashing new possibilities with LED 109
FacadesThe facade is one of the most potent calling cards of your hotel. Create an exterior that is distinctive,
memorable and eye-catching and you can generate a significant amount of extra revenue while
making sure you really stand out from the crowd. LEDs in particular, with their ability to produce
millions of colour combinations and sequence in an endless variety of patterns, are ideal for
generating attention and reinforcing the projection of your brand. ColorReachTM Powercore
Page 131
ColorBurst Compact
Page 131
ColorBlast TR
Page 131
Color Graze
Page 130
Professional LED Catalouge 2011110 Unleashing new possibilities with LED 111
General descriptionPure forms of eye-catching beauty and elegant simplicity crafted from premium blocks of high-grade glass and brushed
aluminum. An invisible disc or plane of light that’s both gloriously luxurious and minimalist in its essence.
Ledino ceiling light
Specifications
Output SELV
Light color 3100K warm white (Dimmable)
Power consumption 3x7,5W powerled
Voltage 220-240V 50-60Hz
Base material Glass
Color aluminum
Life span 20 years
Dimensions 400mmx400mmx42mm (LxWxH)
General descriptionSleek and smooth, this polished organic pebble-shaped table lamp illuminates a space with rays of pure, white light. A unique
work of art for your home.
Product Specifications
Ledino table lamp
Specifications
Output SELV
Light color 3100K warm white
Power consumption 1x7,5W powerled
Voltage 220-240V 50-60Hz
Base material Metal
Color Black, White, Chrome
Life span 20 years
Dimensions 246mmx122mmx110mm (LxWxH)
Variants
Professional LED Catalouge 2011112 Unleashing new possibilities with LED 113
General descriptionRounded and appealing, this friendly dome sits discreetly on the wall and casts a diffuse glow of ambient light from its
smiling mouth.
Ledino wall light
Specifications
Output SELV
Light color 3100K warm white (Dimmable)
Power consumption 2x2,5W powerled
Voltage 220-240V 50-60Hz
Base material aluminum
Color White, Gray
Life span 20 years
Dimensions 131mmx65mmx131mm (LxWxH)
Variant
General descriptionTwo wall-washing beams point up and down from this minimalist aluminum cube, illuminating a wall with fan-shaped plumes
of light.
Product Specifications
Ledino wall light
Specifications
Output SELV
Light color 3100K warm white (Dimmable)
Power consumption 2x2,5W powerled
Voltage 220-240V 50-60Hz
Base material aluminum
Color White, Gray
Life span 20 years
Dimensions 74mmx70mmx119mm (LxWxH)
Variant
Professional LED Catalouge 2011114 Unleashing new possibilities with LED 115
Scandic PalaceCopenhagen, Denmark
The Project Consideration for the architecture and the original atmosphere of the hotel was one of the major
challenges. Managing Hotel director Pia Jakobsen: “It was crucial that the new lighting matched the spirit
of the hotel. Through generations, the Scandic Palace has settled in the minds of the guests, a fact that we
do not want to put at risk. At the same time, we aim to become swan-labelled, and being a member of
the Scandic chain since spring 2009 has naturally also caused us to comply with the environmental policy
of Scandic, which was formulated as early as 1994. It has been a difficult balancing act.” Another challenge
was the wish for the return of the investment to be measurable through concrete results. Pia Jakobsen:
“We have set clear objectives, both short term and long term. For refunding and reduction in energy
consumption, because it is obviously important for us to reduce our CO2-emissions.”
The SolutionScandic Palace Hotel has drawn up a plan for the new lighting in collaboration with Philips. Technical
manager Jan Brink-Pedersen reports: “Luckily, the development of LED lighting has speeded up so much
in recent years that the quality now is top-notch. For example, in terms of colour, where we have chosen
through-going, warm lighting, which is inaccordance with the nuances and light sources that were intended
for the hotel.”
As a result, the majority of the 4390 light sources in the classic hotel in Copenhagen are LED products.
“The low heat generation from the LED lighting is undoubtedly going to lead to less demand for air-
condition,”says Jan Brink-Pedersen.
Case study
LuxSpace
Page 58
Master Glow LED bulb
Page 143
“The spirit of the hotel determined our new lighting”- Hotel director Pia Jakobsen, Scandic Palace Hotel
Professional LED Catalouge 2011116 Unleashing new possibilities with LED 117
The Westin palaceMadrid, Spain
Case study
The Project The Westin Palace Madrid volunteered to be a pilot hotel and test the new bulbs generation from Philips.
The process started by an audit from Philips in October 2008. Jerome Lienaert, Manager Six Sigma Black
Belt accepted to lead this project. The new bulbs were first tested in rooms, on the floors and in the
banquet corridors and no-one noticed any difference in quality or warmth of the lighting between the
conventional and the energy saving bulbs. On top the new bulbs were very esthetical. The life time of a bulb
varies between 3.000 and 8.000 hours and calculations showed a return on investment of 10 months.
The back of the house (BOH) is currently being renovated and this new project also includes the Philips
new generation bulbs. The initial project saves 741 804 Kwh per year which represents 7.9% of 2008 total
consumption. This represents savings of 67.000€ on electricity. It also represents an impressive 318 975 k
annual reduction on CO2 emissions or the equivalent of 15 949 trees.
The Spanish government economically motivates such investments and if the study is accepted the Westin
Palace will be able to claim around 4% of the total project cost or an extra 3 800€. Finally Philips was so
pleased with the outcome of the study and our decision to buy the bulbs that they will sponsor the lighting
of the dome (value 7.000€) and use the Westin Palace Madrid in their advertising. In addition, since Spain
has eliminated the monopoly of the electricity supplier we followed the project of the Westin Valencia and
hired the expertise of Evolutia for a annual fee of only 900€. They made recommendations where we could
buy our energy from. Since July 1st 2009 we decided to buy our electricity from a pool of suppliers and
have since then saved 28 737€ in cost of electricity. We calculate that by the end of the year on top of the
investment of low energy bulbs we will save another 7% by buying electricity more efficiently.
The SolutionNovallure LED candle
Brilliant savings- Hotel director Pia Jakobsen, Scandic Palace Hotel
NovaGlow E14 candle
Page 142
Professional LED Catalouge 2011118 Unleashing new possibilities with LED 119
CitizenM Amsterdam, The Neatherlands
Case study
The Project Affordable luxury for the people’ is citizenM’s slogan, and it stands for hotels that cater for a new
generation of travelers: the ‘Citizen Mobile.’ These customers know what they want in a hotel – stylish
design, great value, comfort, free entertainment and a good location. They also want friendly technology,
that enables them to personalize their hotel stay exactly the way they want it. That extends from
personalized check-in to lighting, temperature and curtain control, wireless internet access and a flat-screen
entertainment center – all accessible through an intuitive ‘MoodPad’ controller.
Personalized settings from your ID card
The system allows guests’ personal profiles to be stored in the CRM(Customer Relation Management) /
PMS (Property Management System), which enables the hotel to ‘remember’ returning guests and their
preferences. As a result, the hotel can create a unique intimacy with its guests, removing the traditional
feeling of anonymity from the hotel experience. Guests can register their personal profiles at home, which
allows them to bypass the often tedious and time-consuming check-in process. They can quickly and
conveniently identify themselves on arrival by using their personal RFID cards.
The SolutionOnce in the room, guests can use the MoodPad to control the character of the ambient lighting in their
room according to their mood or the atmosphere they want to create. At the touch of a button, they can
switch from warm colors, closed blinds, ambiance music and a cosy temperature, to more functional lighting
and ambiance for mobile working. The MoodPad also gives them free access to videos, movie channels and
online content through their flat-screen TV, as well as free music on demand and wireless internet access.
“With the help of Philips, we’re applying technology as an enabler to deliver a better customer experience and more cost-effective operations”- Michael Levie, CEO of citizenM hotels
iColor Cove MX
Page 130
LuxSpace
Page 58
Professional LED Catalouge 2011120 Unleashing new possibilities with LED 121
Realize your vision
LED lighting continues to fulfill its promise as the energy-
efficient, long-lasting, digitally controllable alternative to
conventional lighting solutions. At the same time, Philips
Color Kinetics continues to realize its vision of providing
a complete portfolio of interior and exterior LED lighting
solutions in many major application areas. ColorBurst
Powercore and eW Burst Powercore high-intensity LED
spotlights offer new options for exterior accent and site
lighting in applications that do not require the output or
throw of Reach Powercore LED floodlights. Architectural
and Landscape versions in both large format and compact
sizes support the full range of uplighting, floodlighting,
and decorative lighting applications. eW Fuse Powercore
represents the first new addition to our portfolio of
surface-grazing LED lighting fixtures in more than two
years. eW Fuse Powercore complements our line of
Graze Powercore fixtures with an ultra-compact form
factor that permits installation in tight spaces too small to
accommodate conventional grazing fixtures with similar
light output.
eW Cove EC Powercore completes our line of high-
quality, energy-efficient linear LED cove lighting solutions
for general interior illumination. Like its more powerful
cousins, eW Cove MX Powercore and eW Cove QLX
Powercore, eW Cove EC Powercore delivers extremely
uniform and consistent light with no socket shadowing,
hot spots, color shifting, or unwanted edge effects — all
at an affordable price. Philips Color Kinetics remains at
the forefront of LED lighting solutions for theatrical and
touring environments with the introduction of ColorBlast
TRX and ColorBlaze TRX RGBAW wash and effect
fixtures. Our first true five-channel fixtures, ColorBlast
TRX and ColorBlaze TRX offer a significantly enhanced
color range, exceptional light output that far exceeds
the competition, and convenient onboard addressing and
configuration features for ease of use and control. As the
global lighting leader, Philips is committed to delivering
innovative, energy-efficient LED lighting technologies and
solutions. Our LED lighting systems have been installed in
thousands of locations around the world, from broadway
sets and television studios to renowned architectural
structures, hospitality venues, and personal residences.
LED lighting innovation
Professional LED Catalouge 2011122 Unleashing new possibilities with LED 123
County HallLondon, UK
The Project Sitting on London’s Southbank, once the headquarters of local government for London, County Hall is,
perhaps, better known for its tourist attractions, businesses and hotels, which have made their home within
this grand architectural space.
The SolutionArchitainment Lighting Ltd installed a state-of-the-art LED lighting solution. Offering exceptional lighting
projection of up to 500 feet, Philips ground breaking ColorReach™ Powercore technology has ensured that
County Hall is now as much of an iconic landmark on London’s Southbank by night as it is by day.
With LED development moving ever forward, the project took full advantage of the latest introduction
of Philips ColorReach™ Powercore and the benefits it offered ensuring its 2 main objectives were
fulfilled. The first of these was that the illumination of the building should allow County Hall to become a
distinctive and attractive landmark on the night time scene as well as providing a sense of cohesion with
other attractions along this popular stretch of the river. Secondly, the lighting solution should be flexible
enough to accommodate the requirements of corporate clients who hire out the area for their own events.
The thinking here being that the lighting could be changed to reflect the brand colors of the individual
companies involved. ColorReach™ Powercore is the first LED architectural floodlight which is powerful
enough to illuminate large-scale structures having more lumen output than any other comparable fixture
for exterior illumination. Indeed, it offers over 5,000 lumens over an unprecedented light projection of over
500 feet. As Peter Castelton, Managing Director of Metropolitan Estates explains, “Having seen what Philips
ColorReach™ Powercore was capable of at the initial trial we were completely convinced that this was
the right solution for us. We have certainly not seen anything that can beat its flexibility, superb projection
capability and excellent precision control. What is more is that it provides saturated color output at
significantly less cost for installation, operation and maintenance than traditional light sources – and in
today’s current economic climate these cost elements simply cannot be ignored.”
Case study
ColorReachTM Powercore
Page 130
Professional LED Catalouge 2011124 Unleashing new possibilities with LED 125
Gateshead Millennium BridgeNewcastle, UK
Philips has supplied a state-of-the-art LED lighting solution atGateshead’s world famous Millennium Bridge. This truly uniquepiece of engineering is now complemented by ground breakingColorReach™ Powercore technology.
The Project Acclaimed as the world’s first and only tilting bridge the LED lighting solution supplied is in itself a
revolutionary development in LED technology. As Craig Grieveson of Stage Electrics comments, When
Gateshead council decided that the time had arrived to update the existing lighting system it was an ideal
opportunity to put forward Philips ColourReach™. It’s the first LED architectural floodlight which is
powerful enough to illuminate large-scale structures having more lumen output than any other comparable
fixture for exterior illumination.
The SolutionIndeed, ColorReach™ offers exceptional light projection of up to 5,000lumens over 500 feet providing
colour mixing effects through both static and dynamic colour changing sequences. In this instance, the
ColorReach™ modules also offered an energy saving opportunityoperating at 290 W at full output
compared to the 700 W traditionalfloodlights they replaced.
Simple and easy to use the system is programmed to run from sunset through to 1am each evening. To
create these stunning effects, a total of 8 RGB LED ColorReach™ Powercore luminaires were installed, all
incorporating a flexible selection of beam angles allowing differing combinations of dynamic displays to be
produced. These were run via an DMX controller using astronomically triggered timelines as well as real
time special events.
Potential also exists, for example, to use one beam on the module’s lower half to bathe the vertical plane
with colour at deck level whilst utilising a different beam angle to project a contrasting or complementary
colour hundreds of feet up at the top of the bridge arch. In addition, two remote touch screens have been
installed to allow bridge staff to take manual control of the system for last minute special requests or
specific colour requirements.
Without doubt, the additional dynamic flexibility offered by ColourReach™ will further add to its multi
award winning status as a major national and international tourist attraction.
ColorReachTM Powercore
Page 130
Case study
Professional LED Catalouge 2011126 Unleashing new possibilities with LED 127
PUB department store Newcastle, UK
“Lighting plays a significant role in the project, balancing the historical roots with a modern, constantly changing content. “The dome breathes light!”
- Kai Piippo, Lighting designer, Professional Member of PLDA
The Project The project was to re-design PUB, the oldest department store in Sweden. Formerly a rather anonymous
city galleria, PUB is changing into a modern department store focused on fashion for a young, urban,
internationally orientated target group.
The lighting design concept for the cupola aimed to emphasize its role as a natural centre point of the
department store. The architectural design allowed for an interesting play with light, shape and movement.
The elegantly lit dome is the visual centrepiece of PUB, Stockholm’s oldest department store. The upper
level space is intended to serve as a natural gathering point, and therefore the dome’s lighting scheme was
designed to draw customers up from the store’s lower floors.
The designers sought to create a dynamic atmosphere where customers would experience various scenes
during their visit, and Philips intelligent LED lighting proved the ideal choice for bringing their concept to life.
During the day, ten different lighting scenes create variable ambiance in the space. For example, customers
visiting in the morning are treated to a fifteen-minute sunrise scene, incorporating warm colors and smooth
movements to align with the human bio-rhythm. In the afternoon, the pulse of the store quickens; the colors
become more vivid and the dynamics more playful and experimental.
The SolutionBy changing the colours, the intensities and the speed of the dynamics of the 500 RGB LED light fittings that
are hidden in the construction, the cupola transforms into a living element that breathes light.
iColor Cove MX Powercore
Page 130
Case study
Professional LED Catalouge 2011128 Unleashing new possibilities with LED 129
Asian paints, experience color storeMumbai, India
“We feel we’ve created something engaging and inspiring that has redefined not only perceptions of Asian Paints in the market, but the Indian retail landscape in general”
- KBS Anand, President of Decorative Business, Asian Paints
The Project Home décor in India is handled almost entirely by contractors. Consumers have little involvement in home
decor and do not use much colour in their homes. The challenge of Asian Paints color store project was to
design a flagship store that would inspire consumers to do more with color.
For example, the entrance of the store is highlighted with hundreds of lights suspended in an arch, inviting
guests to choose a color from a series of pedestals. Motion sensors hidden within each pedestal send a
pulse of the selected color up through the archway lights and across the facade, creating constant color
shifts throughout the whole store-front.
The first Experience Color Store opened in Mumbai in 2009 and has already won a couple of design awards
in the region:
- Best International Retail Interior, Retail Interior Awards 2008
- Best Manufacturer’s Showroom, Best Innovative Concept, Best in Class for International Store Design,
Retail Design Institute Awards 2008
- Creme de la Creme, WPPed Cream 2008
- Visual Technology in a Visual Display, VMSD International Visual Competition 2009
- Silver IDEA, IDSA IDEA 2009
- A.R.E. Award 2009
The SolutionPhilips Color Kinetics - iColor Flex SLX are embedded into the suspended disks in the entrance. Using red,
blue and green LEDs motion sensors with light system manager creates constant color shifts throughout
the whole store-front.
iColor Flex MX
Page 130
Case study
Professional LED Catalouge 2011130 Unleashing new possibilities with LED 131
Product Range
iColor Cove EC
iColor Accent MX Powercore
eW Accent MX Powercore
iColor Tile MX
C-Splash 2
eW Cove QLX Powercore
iW Blast Powercore
iW Blast TR
eW Blast Powercore
eW Burst Powercore
Multi Synchronizer SmartJack ProSynchronizer Pharos Controllers
ColorBlast TR
ColorBurst 6
eW Cove EC Powercore
ColorBlast Powercore
ColorBlast 6 ColorBlast 12
ColorBlast TRX
NE
W
NE
W
NE
W
NE
WN
EW
NE
W
NE
W
ColorBurst Compact Powercore
eW Burst Compact Powercore
UPD
AT
ED
UPD
AT
ED
AuxBoxInstantly activate iPlayer 3 light shows with any remote triggering device
AuxBox Multi-Protocol Converter
Video System Manager Pro
Ethernet Controller Keypad
ColorReach Powercore
iW Reach Powercore
eW Reach Powercore
ColorReach TR Powercore
iW Reach TR Powercore
eW Downlight Powercore
ColorGraze Powercore
iColor Cove QLX
eW Profile Powercore
Light System Manager
Controller Keypad
iColor Cove MX Powercore
iW Graze Powercore
ColorBurst Powercore
eW Cove MX Powercore
iW Cove MX Powercore
iColor Flex MXiColor Flex LMX
ColorDial Pro
eW Graze Powercore
eW / Color Fuse Powercore
ColorBlazeColorBlaze TRX
eW Flex SLX
iPlayer 3
Theatrical / Touring
Graze / Wash
Flood / Spot
Cove
Direct View
Task / Downlight
Controllers
Controller Accessories
NE
W
NE
WN
EW
NE
W
NE
W
NE
W
NE
W
UPD
AT
ED
UPD
AT
ED
For detailed information of the products please contact our customer service executive
at 1860 180 1111, 011 6600 1111 “standard call rates apply”
Professional LED Catalouge 2011132 Unleashing new possibilities with LED 133
Be inspired b a simple and economical bright-light solution
With our new philips MASTER LED lamp for general and accent lighting, we are taking LED lighting to the next level.
Your aspiration-to reduce energy and maintenance costs without compromising on light quality and ambience is now
very much reality.
MASTER LED lets you enjoy energy saving of up to 80% from a high quality lamp and up to 50 times longer than
conventional light sources and is ultra-easy to install. It’s simply brilliant!
LED Lamps
Professional LED Catalouge 2011134 Unleashing new possibilities with LED 135
“Practise what you preach. If you are going to promote sustainable business then you really ought to make sure the lighting is an ‘illuminating example’ as well.”
- Thomas Schuurmans, New business developer at Reggs
The Project Reggs, a design agency in Amsterdam, translates design and communication into brand strategies and
effective ‘carriers’, such as products, packaging and corporate identity. Reggs does this on the basis of its own
unique vision. ‘Creating added value through sustainability’ is the slogan Reggs uses to convince clients that
sustainable business really is possible.
Schuurmans explains: “We wanted to use light to create a cosy, friendly atmosphere whilst at the same time
retaining the industrial character of the space. Echoing the functional grid of factory lamps that used to hang
here, we chose to install a grid of lamps that are reminiscent of the archetypal incandescent lamp.”
The design agency is located in the production hall of what used to be a bubble-gum factory. The studio
has a floor space of 750 m2 and is 8 metres high. Schuurmans explains: “We wanted to use light to create
a cosy, friendly atmosphere whilst at the same time retaining the industrial character of the space. Echoing
the functional grid of factory lamps that used to hang here, we chose to install a grid of lamps that are
reminiscent of the archetypal incandescent lamp.”
The SolutionInitial research into the possibilities showed that the Philips MASTER LED would be the most suitable. “It
has the familiar shape of an incandescent lamp, but thanks to the LED technology it is very energy-efficient,”
says Schuurmans. “The lamp produces light that is bright white yet personal at the same time – this ties in
nicely with the creative atmosphere in the space. The bold design with cooling ribs fits in beautifully with
the industrial ‘look and feel’ of this environment.” Various calculations to determine the light output showed
that a total of 216 lamps would be required to light the space effectively. These have been installed in a
fine-meshed grid below the ceiling. “Because they are all at exactly the same height, as dusk falls it looks
as if there is a second, transparent ceiling between the floor and the ceiling, and this creates a friendlier
atmosphere in the large factory hall.”
Case study
Master Glow LED bulb 7W
Page 143
Design Agency Reggs Amsterdam, The Netherlands
Professional LED Catalouge 2011136 Unleashing new possibilities with LED 137
General descriptionPhilips MASTER LED MR16 integrates a high power LED light source with an excellent thermal management solution in a
standard halogen form factor to replace 20W halogen.
• Standard Halogen form factor
• Ultra energy efficient replacement for 20W Halogen
• 45,000 hours average life time
• No mercury, UV and IR
• RoHS compliant
• CCT : 2700K.
Product Specifications
Master LED MR16 4W
Product Name Ordering Code 12NC
Wattage (W)
Cap Base
CRI LuminousFlux (lm)
Lifetime(hrs)
Voltage (V)
Beam Angle
CCT Beam Intensity
Dimm-mable
MASTER LED 4W GU5.3 2700K 12V MR16 24D
929000158207 4 GU5.3 80 160 45,000 12 24 2700K 700 No
MASTER LED 4W GU5.3 3000K 12V MR16 24D
929000158307 4 GU5.3 80 165 45,000 12 24 3000K 720 No
MASTER LED 4W GU5.3 4000K 12V MR16 24D
929000158407 4 GU5.3 80 185 45,000 12 24 4000K 720 No
General descriptionPhilips MASTER LEDspotLV 7-35W MR16 24D is the latest in Philips series of Low Voltage (12Vac) Halogen spot
replacement. It has exact form fit with Halogen lamps.
• Replacement for 35W 12VAC Halogen lamps
• 80% energy saving
• Retrofits into vast majority of MR16 fixtures
• High CRI of 80
• 25,000 hours average life time
• No UV and IR
Product Name Ordering Code 12NC
Wattage (W)
Cap Base
CRI LuminousFlux (lm)
Lifetime(hrs)
Voltage (V)
Beam Angle
CCT Beam Intensity
Dimm-able
MASTER LEDspotLV GU 5.3 MR16 2700K MR16 24D
929000172306 7 GU5.3 80 260 25,000 12 24 2700K 1200 No
MASTER LEDspotLV GU 5.3 MR16 3000K MR16 24D
929000172406 7 GU5.3 80 275 25,000 12 24 3000K 1270 No
MASTER LEDspotLV GU 5.3 MR16 4000K MR16 24D
929000172706 7 GU5.3 80 305 25,000 12 24 4000K 1400 No
Master LED Spot LV 7-35W
Professional LED Catalouge 2011138 Unleashing new possibilities with LED 139
Master LED MR16 10W Dimmable
General descriptionPhilips MASTER LED 7-35W 12V MR16 Dim integrates leading high power LED light source and compact high efficiency
driver into a traditional halogen form factor. It is ideal for applications including track lighting, general architectural and
landscape lighting
• Replacement for 35W Halogen lamps
• 80% energy saving
• Long lifetime of 25,000 hours (B50/L70)
• No UV and IR, RoHS Compliant
• 15, 24 & 36 Degree option
Product Specifications
Master LED 7-35W 12VMR16 Dimmable
Product Name Ordering Code 12NC
Wattage (W)
Cap Base
CRI LuminousFlux (lm)
Lifetime(hrs)
Voltage (V)
Beam Angle
CCT Beam Intensity
Dimm-able
MASTER LED 10-50W 2700K 12V MR16 15D Dim
929000176806 10 GU5.3 80 360 25,000 12 15 2700K 4100 Yes
MASTER LED 10-50W 3000K 12V MR16 15D Dim
929000176906 10 GU5.3 80 370 25,000 12 15 3000K 4200 Yes
MASTER LED 10-50W 4000K 12V MR16 15D Dim
929000177006 10 GU5.3 80 420 25,000 12 15 4000K 4700 Yes
MASTER LED 10-50W 2700K 12V MR16 24D Dim
929000174106 10 GU5.3 80 360 25,000 12 24 2700K 1700 Yes
MASTER LED 10-50W 3000K 12V MR16 24D Dim
929000174206 10 GU5.3 80 370 25,000 12 24 3000K 1760 Yes
MASTER LED 10-50W 4000K 12V MR16 24D Dim
929000174306 10 GU5.3 80 420 25,000 12 24 4000K 2000 Yes
MASTER LED 10-50W 2700K 12V MR16 36D Dim
929000177106 10 GU5.3 80 440 25,000 12 36 2700K 1050 Yes
MASTER LED 10-50W 4000K 12V MR16 36D Dim
929000177206 10 GU5.3 80 465 25,000 12 36 3000K 1110 Yes
MASTER LED 10-50W 4000K 12V MR16 36D Dim
929000177306 10 GU5.3 72 540 25,000 12 36 4000K 1295 Yes
Product Name Ordering Code 12NC
Wattage (W)
Cap Base
CRI LuminousFlux (lm)
Lifetime(hrs)
Voltage (V)
Beam Angle
CCT Beam Intensity
Dimm-able
MASTER LED 7-35W 2700K 12V MR16 15D Dim
929000172106 7 GU5.3 80 280 40,000 12 15 2700K 3210 Yes
MASTER LED 7-35W 3000K 12V MR16 15D Dim
929000172206 7 GU5.3 80 295 40,000 12 15 3000K 3300 Yes
MASTER LED 7-35W 4000K 12V MR16 15D Dim
929000176606 7 GU5.3 80 330 40,000 12 15 4000K 3600 Yes
MASTER LED 7-35W 2700K 12V MR16 24D Dim
929000173806 7 GU5.3 80 280 40,000 12 24 2700K 1380 Yes
MASTER LED 7-35W 3000K 12V MR16 24D Dim
929000173906 7 GU5.3 80 295 40,000 12 24 3000K 1460 Yes
MASTER LED 7-35W 4000K 12V MR16 24D Dim
929000174006 7 GU5.3 80 330 40,000 12 24 4000K 1590 Yes
MASTER LED 7-35W 2700K 12V MR16 36D Dim
929000172506 7 GU5.3 80 340 40,000 12 36 2700K 815 Yes
MASTER LED 7-35W 4000K 12V MR16 36D Dim
929000172606 7 GU5.3 80 360 40,000 12 36 3000K 860 Yes
MASTER LED 7-35W 4000K 12V MR16 36D Dim
929000176706 7 GU5.3 72 410 40,000 12 36 4000K 980 Yes
General descriptionPhilips MASTER LED MR16 10-50W 12VAC is the latest in Philips series of Low Voltage (12VAC) Halogen spot replacement
It has exact form fit with Halogen lamps.
• Replacement for 50W 12V Halogen lamps
• 80% energy saving
• Dimmable with recommended dimmers
• Retrofits into vast majority of MR16 fixtures
• Long lifetime of 25,000 hours (B50/L70)
• 15, 24 & 36 Degree option
Professional LED Catalouge 2011140 Unleashing new possibilities with LED 141
General descriptionEfficient accent lighting is now possible with the GU10 MASTER LED. With no heat, UV or IR in the beam, it outperforms
halogen lighting in terms of ambience while saving on evergy and maintenance costs.
• Ultra energy efficient replacement for 50W standard dichroic halogen 230V lamps
• 40,000 hours average lifetime: less maintenance
• No mercury, UV and IR
• RoHS compliant.
• 25 and 40 beam angles
• Dimmable
• CCT : 2700K, 3000K and 4200K.
Product Specifications
Master LED GU10
Product Name Ordering Code 12NC
Wattage (W)
Cap Base
CRI LuminousFlux (lm)
Lifetime(hrs)
Voltage (V)
Beam Angle
CCT Beam Intensity
Dimm-able
MASTER LED GU10 929000163802 7 GU10 80 250 40,000 230 25 2700K 1100 Yes
MASTER LED GU10 929000176906 7 GU10 80 290 40,000 230 25 3000K 1300 Yes
MASTER LED GU10 929000177006 7 GU10 80 290 40,000 230 25 4200K 1300 Yes
MASTER LED GU10 929000174106 7 GU10 80 250 40,000 230 40 2700K 430 Yes
MASTER LED GU10 929000174206 7 GU10 80 290 40,000 230 40 3000K 600 Yes
MASTER LED GU10 929000174306 7 GU10 80 290 40,000 230 40 4200K 600 Yes
Master LED PAR
Product Name Ordering Code 12NC
Wattage (W)
Cap Base
CRI LuminousFlux (lm)
Lifetime(hrs)
Voltage (V)
Beam Angle
CCT Beam Intensity
Dimm-able
MASTER LED PAR 30S 929000162201 11 E27 80 430 45,000 230 25 2700K 1880 No
MASTER LED PAR 38 Indoor
929000162101 16 E27 80 600 45,000 230 25 2700K 2880 No
MASTER LED PAR 38 Outdoor
929000162501 16 E27 80 600 20,000 230 25 2700K 2880 No
General descriptionPhilips MASTER LED PAR30 & PAR38 integrates a high power LED light source with excellent thermal management solution
in a standard halogen form-factor to replace upto 75Watt traditional halogen lamp.
• Replacement for Standard 75Watt halogen lamp
• High Energy efficiency of more then 80%
• Long life of 45,000 hours
• Life of 20,000 hours for PAR38 outdoor
• No External driver is required
• Environment friendly RoHS complaint , No mercury
• No UV and IR
• CCT : 2700K..
Professional LED Catalouge 2011142 Unleashing new possibilities with LED 143
Product Specifications
NovaGlow E14 Candle
General descriptionPhilips Philips NovaGlow E14 CANDLE integrates a high power LED light source with an unique lens design to give sparkle
effect to replace upto 20W GLS candle.
• Standard GLS Candle form factor
• Ultra Energy efficient, replacement upto 20W GLS
• Available in 2W and 3W
• 15,000 hours average life time
• No external driver is required
• No mercury, UV and IR
• RoHS complaint
• CCT : 2700K and 3000K.
Product Name Ordering Code 12NC
Wattage (W)
Cap Base
CRI LuminousFlux (lm)
Lifetime(hrs)
Voltage (V)
Beam Angle
CCT Beam Intensity
Dimm-mable
Novaglow E14 Candle
929000185502 2 E14/B35 65 40 25,000 230 N/A 2700K N/A No
Novalier 3W E14 2700K 230V B35 CL Dim
929000186704 3 E14 90 136 20,000 230 N/A 2700K N?A Yes
General descriptionThe bulb-shaped E27 combines the trusted form factor of incandescent lamps and the common energy-saver with all the
benefits of state-of-the-art LED technology.
• Ultra energy efficient replacement upto 40w GLS
• 40,000 hours average life time
• No mercury, UV and IR
• RoHS complaint
• CCT : 2700K.
Product Name Ordering Code 12NC
Wattage (W)
Cap Base
CRI LuminousFlux (lm)
Lifetime(hrs)
Voltage (V)
Beam Angle
CCT Beam Intensity
Dimm-able
MASTER GLOW LED bulb A60
929000159602 8 E27 80 470 25,000 230 250 2700K N/A Yes
MASTER GLOW LED bulb A60
TBA 8 B27 80 470 25,000 230 250 2700K N/A Yes
Master GlowLED bulb
Professional LED Catalouge 2011144 Unleashing new possibilities with LED 145
Master LED Tube
General descriptionPhilips MASTER LEDtube integrates LED light source with frosted cover design into traditional liner fluorescent form
while consuming only 22Watt and offer energy saving up to 50%.
• Replacement for TLD 36Watt with ballast
• No glare discomfort & Uniform light distribution
• No external driver is required
• No mercury, UV and IR
• CE, KEMA, WEEE, EMC and RoHs complaint
Product Name Ordering Code 12NC
Wattage (W)
Cap Base
CRI LuminousFlux (lm)
Lifetime(hrs)
Voltage (V)
Beam Angle
CCT Beam Intensity
Dimm-mable
MASTER LEDtube GA 600mm 11W 840 G13**
929000181201 11 G13 85 750 30,000 240 120 4000K N/A No
MASTER LEDtube GA 900mm 17W 840 G13**
929000181401 17 G13 85 1150 30,000 240 120 4000K N/A No
MASTER LEDtube GA 1200mm 22W 840 G13**
929000181601 22 G13 85 1500 30,000 240 120 4000K N/A No
MASTER LEDtube GA 600mm 11W 865 G13**
929000181301 11 G13 85 750 30,000 240 120 6500K N/A No
MASTER LEDtube GA 900mm 17W 865 G13**
929000181501 17 G13 85 1150 30,000 240 120 6500K N/A No
MASTER LEDtube GA 1200mm 22W 865 G13**
929000181701 22 G13 85 1500 30,000 240 120 6500K N/A No
**Operate directly on 240Vac , therefore need to disconnect the Ballast in the existing fitting.Note : Dimming possible with only recommended dimmers.
Professional LED Catalouge 2011146 Unleashing new possibilities with LED 147
1960 1970 1980
LEDs: 1960 to today
• Red LEDs used as small indicator lights in
electronic devices
• First green and yellow LEDs
• LEDs used in watches, calculators, electronics,
traffic lights
• First blue LEDs
• First super-bright red LEDs
1990 2000 2010 and beyond
• High-brightness blue LED created by Shuji
Nakamura in 1993, allowing LED sources to
produce virtually any color, including white
• First white-light LED sources developed
in 1996
• LEDs begin to replace incandescent sources
for applications that call for colored light
• RGB lighting applications appear in 1998
• High-brightness green and amber LEDs
• Output levels of up to 100 lumens achieved
• LEDs widely accepted for entertainmen
lighting by 2003
• First tunable white light fixtures
• White-light LEDs viable for accent lighting
by 2004
• White-light LEDs viable for general
illumination by 2008
• LED technology expected to be the
preferred lighting method in homes and
offices by 2025*
* Source: US Department of Energy and Optoelectronics Industry Development Association
© 2011 Koninklijke Philips Electronics N.V.
All rights reserved. Reproduction in whole or in part is prohibited.Owing to continuous Innovation & Improvement, Philips India reserves the rightto make changes in the data/details without prior notice.Care has been taken to ensure that the information contained within is correct.
North
Philips Electronics India Ltd,
Regional sales manager
9th Floor, DLF - 9B, DLF Cyber City
DLF Phase 3, Gurgaon 122002
Tel :- 91 124 460 6000
Fax :- 91 124 460 6666
Email : crmlightingnorth@philips.com
Philips Electronics India Ltd,
8th floor, DLF - 9B, DLF Cyber City
DLF phase 3, Gurgaon 122002
Tel :- 91 124 460 6000
Fax :- 91 124 460 6666
Contact customer service executive at
1800 102 2929 (Toll free)
1860 180 1111, 0124- 4291111
“Standard call rates apply”
West
Philips Electronics India Ltd,
Regional sales manager
Technopolis Knowledge Park,
Mahakali caves road,
Chakala, Andheri East, Mumbai 400093
Tel :- 91 22 6691 2000
Fax :- 91 22 6691 2389 / 6691 2398
Email : crmlightingwest@philips.com
Philips Electronics India Ltd,
Area sales manager
602, Heritage Tower, 6th floor,
Behind Visnagar Co-op Bank,
Near Gujarat Vidyapith, Usmanpura,
Ahmedabad, Gujarat
Tel :- 91 79 2754 0708
Fax :- 91 79 2754 0666
Email : crmlightingwest@philips.com
South
Philips Electronics India Ltd,
Temple Towers, 5th. Floor,
Old no. 476, new no. 672,
Anna Salai, Nandanam, Chennai 600 035
Tel :- 91 45 6650 1000
Fax :- 91 44 6650 1075
Email : crmlightingsouth@philips.com
Philips Electronics India Ltd,
Area sales manager
The Estate, 4th floor, North Side,
121, Dickenson Road, Bengaluru 560 042
Tel : 080 6692 9898
Fax :- 080 6692 9930
Email : crmlightingsouth@philips.com
Philips Electronics India Ltd,
Area sales manager
6-3-1109 / I / P/ 103, 3rd floor
Jewalpawani Towers, Rajbhavan Road,
Somajiguda, Hyderabad
Tel :- 040 6646 7676 / 4825
Fax :- 040 6678 7974
Email : crmlightingsouth@philips.com
East
Philips Electronics India Ltd,
Regional sales manager
7, Justice Chandra Madhab Road,
Kolkata 700 020
Tel : 91 33 2486 7621-24
Fax : 91 33 2486 8318
Email : crmlightingeast@philips.com