Post on 10-Jan-2016
description
transcript
LED light fixtures
Warehouse, Commercial, Industrial, Freezer and Cooler applications
Before
After
MB-3 LED fixture. This fixture is a 1:1 direct replacement for low bay and high bay 250 Watt and 400 Watt HID fixtures with mounting heights 15' to 30'.
Available in 4100K or 6500K lamp color. There are 3 adjustable light bars to direct the light where it is required. Standard input voltage 208 volts to 277
volts, 120 volts and 480 volts units are available. 160 Watts total consumption. This unit comes automatically blue tooth enabled and can
communicate with optional web based software called LightRules – see video link above. An integral occupancy sensor is installed and can be set via
LightRules or without the software via dip switches from 30 seconds to 30 minutes or always on. This fixture can also be dimmed from 100% to 1% via
LightRules software or dip switches.
Bottom view of the HB-3 LED fixture. A 1:1 direct replacement for high bay 400 Watt HID fixtures with mounting heights 25' to 55'. Available in 4100K or 6500K lamp color. There are 3 adjustable light bars to direct the light
where it is required. Standard input voltage 208 volts to 277 volts, 120 volts and 480 volts units are available. 160 Watts total consumption. This unit
comes automatically blue tooth enabled and can communicate with optional web based software called LightRules - see video link above. An integral
occupancy sensor is installed and can be set via LightRules or without the software via dip switches from 30 seconds to 30 minutes or always on. This fixture can also be dimmed from 100% to 1% via LightRules software or dip
switches.
HB-18 LED fixture. A 1:1 direct replacement for high bay 400 Watt and 1,000 Watt HID fixtures with mounting heights 40' to 80'. Available in 4100K or
6500K lamp color. There are 3 adjustable light bars to direct the light where it is required. Standard input voltage 208 volts to 277 volts, 120 volts and 480 volts units are available. 160 Watts total consumption. This unit comes automatically blue tooth enabled and can communicate with optional web
based software called LightRules - see video link above. An integral occupancy sensor is installed and can be set via LightRules or without the
software via dip switches from 30 seconds to 30 minutes or always on. This fixture can also be dimmed from 100% to 1% via LightRules software or dip
switches.
HB-26 LED fixture. A 1:1 direct replacement for high bay 1,000 Watt HID fixtures with mounting heights 40' to 110'. Available in 4100K or 6500K lamp color. There are 3 adjustable light bars to direct the light where it is required. Standard input voltage 208 volts to 277 volts, 120 volts and 480 volts units are available. 160 Watts total consumption. This unit comes automatically
blue tooth enabled and can communicate with optional web based software called LightRules - see video link above. An integral occupancy sensor is installed and can be set via LightRules or without the software via dip
switches from 30 seconds to 30 minutes or always on. This fixture can also be dimmed from 100% to 1% via LightRules software or dip switches.
MB-3 fixtures mounted at 17 feet
These four LED fixtures replaced four 400 Watt metal halide fixtures
MH lamps burn at 750 degrees each heating the air you’re cooling
MH freezer fixtures cannot be turned off because of the long warm
up time to re-ignite. MH freezer fixtures burn 8,760 annual hours
LED fixtures perform better in the cold and have integrated occupancy
sensors
LED fixtures are instant on. The sensors on these fixtures are set at 3 minutes then turn off if there is no movement under the fixture
The on-board computer reported 900 annual hours
Energy Savings = 90%ROI = 6 months
Freezer at 8 degrees F